Convert files to UTF-8 and some cleanups

[net-next-2.6.git] / drivers / net / hamradio / 6pack.c

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 86b3bb9bec2d38727922fda410b58f73f9019fde..e0119f6a3319b2fca40af251d7bd3bf09dcde038 100644 (file)
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -3,7 +3,7 @@
  *             devices like TTY. It interfaces between a raw TTY and the
  *             kernel's AX.25 protocol layers.
  *
- * Authors:    Andreas Knsgen <ajk@iehk.rwth-aachen.de>
+ * Authors:    Andreas Könsgen <ajk@iehk.rwth-aachen.de>
  *              Ralf Baechle DL5RB <ralf@linux-mips.org>
  *
  * Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by
@@ -288,10 +288,11 @@ static int sp_close(struct net_device *dev)
 
 /* Return the frame type ID */
 static int sp_header(struct sk_buff *skb, struct net_device *dev,
-       unsigned short type, void *daddr, void *saddr, unsigned len)
+                    unsigned short type, const void *daddr,
+                    const void *saddr, unsigned len)
 {
 #ifdef CONFIG_INET
-       if (type != htons(ETH_P_AX25))
+       if (type != ETH_P_AX25)
                return ax25_hard_header(skb, dev, type, daddr, saddr, len);
 #endif
        return 0;
@@ -323,34 +324,33 @@ static int sp_rebuild_header(struct sk_buff *skb)
 #endif
 }
 
+static const struct header_ops sp_header_ops = {
+       .create         = sp_header,
+       .rebuild        = sp_rebuild_header,
+};
+
 static void sp_setup(struct net_device *dev)
 {
-       static char ax25_bcast[AX25_ADDR_LEN] =
-               {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
-       static char ax25_test[AX25_ADDR_LEN] =
-               {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
-
        /* Finish setting up the DEVICE info. */
        dev->mtu                = SIXP_MTU;
        dev->hard_start_xmit    = sp_xmit;
        dev->open               = sp_open_dev;
        dev->destructor         = free_netdev;
        dev->stop               = sp_close;
-       dev->hard_header        = sp_header;
+
        dev->get_stats          = sp_get_stats;
        dev->set_mac_address    = sp_set_mac_address;
        dev->hard_header_len    = AX25_MAX_HEADER_LEN;
+       dev->header_ops         = &sp_header_ops;
+
        dev->addr_len           = AX25_ADDR_LEN;
        dev->type               = ARPHRD_AX25;
        dev->tx_queue_len       = 10;
-       dev->rebuild_header     = sp_rebuild_header;
        dev->tx_timeout         = NULL;
 
        /* Only activated in AX.25 mode */
-       memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
-       memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
-
-       SET_MODULE_OWNER(dev);
+       memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+       memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
 
        dev->flags              = 0;
 }
@@ -914,7 +914,7 @@ static void decode_prio_command(struct sixpack *sp, unsigned char cmd)
                                        printk(KERN_DEBUG "6pack: protocol violation\n");
                                else
                                        sp->status = 0;
-                               cmd &= !SIXP_RX_DCD_MASK;
+                               cmd &= ~SIXP_RX_DCD_MASK;
                }
                sp->status = cmd & SIXP_PRIO_DATA_MASK;
        } else { /* output watchdog char if idle */