net/can/mscan: improve build

[net-next-2.6.git] / drivers / net / can / Kconfig

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 0900743724624f5e39e8a83622d653a7b29b4d31..bb803fa1e6a7ccc00d841dbf1d536bf19bd35f58 100644 (file)
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -35,52 +35,30 @@ config CAN_CALC_BITTIMING
          arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
          If unsure, say Y.
 
-config CAN_SJA1000
-       depends on CAN_DEV && HAS_IOMEM
-       tristate "Philips SJA1000"
+config CAN_AT91
+       tristate "Atmel AT91 onchip CAN controller"
+       depends on CAN_DEV && ARCH_AT91SAM9263
        ---help---
-         Driver for the SJA1000 CAN controllers from Philips or NXP
+         This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
 
-config CAN_SJA1000_ISA
-       depends on CAN_SJA1000 && ISA
-       tristate "ISA Bus based legacy SJA1000 driver"
+config CAN_TI_HECC
+       depends on CAN_DEV && ARCH_OMAP3
+       tristate "TI High End CAN Controller"
        ---help---
-         This driver adds legacy support for SJA1000 chips connected to
-         the ISA bus using I/O port, memory mapped or indirect access.
+         Driver for TI HECC (High End CAN Controller) module found on many
+         TI devices. The device specifications are available from www.ti.com
 
-config CAN_SJA1000_PLATFORM
-       depends on CAN_SJA1000
-       tristate "Generic Platform Bus based SJA1000 driver"
+config CAN_MCP251X
+       tristate "Microchip MCP251x SPI CAN controllers"
+       depends on CAN_DEV && SPI
        ---help---
-         This driver adds support for the SJA1000 chips connected to
-         the "platform bus" (Linux abstraction for directly to the
-         processor attached devices).  Which can be found on various
-         boards from Phytec (http://www.phytec.de) like the PCM027,
-         PCM038.
+         Driver for the Microchip MCP251x SPI CAN controllers.
 
-config CAN_SJA1000_OF_PLATFORM
-       depends on CAN_SJA1000 && PPC_OF
-       tristate "Generic OF Platform Bus based SJA1000 driver"
-       ---help---
-         This driver adds support for the SJA1000 chips connected to
-         the OpenFirmware "platform bus" found on embedded systems with
-         OpenFirmware bindings, e.g. if you have a PowerPC based system
-         you may want to enable this option.
+source "drivers/net/can/mscan/Kconfig"
 
-config CAN_EMS_PCI
-       tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
-       depends on PCI && CAN_SJA1000
-       ---help---
-         This driver is for the one, two or four channel CPC-PCI,
-         CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
-         (http://www.ems-wuensche.de).
+source "drivers/net/can/sja1000/Kconfig"
 
-config CAN_KVASER_PCI
-       tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
-       depends on PCI && CAN_SJA1000
-       ---help---
-         This driver is for the the PCIcanx and PCIcan cards (1, 2 or
-         4 channel) from Kvaser (http://www.kvaser.com).
+source "drivers/net/can/usb/Kconfig"
 
 config CAN_DEBUG_DEVICES
        bool "CAN devices debugging messages"