#include <linux/if_vlan.h>
#include <linux/if_bonding.h>
#include <net/route.h>
+#include <net/net_namespace.h>
#include "bonding.h"
#include "bond_3ad.h"
#include "bond_alb.h"
/*---------------------------- General routines -----------------------------*/
-const char *bond_mode_name(int mode)
+static const char *bond_mode_name(int mode)
{
switch (mode) {
case BOND_MODE_ROUNDROBIN :
static int bond_update_speed_duplex(struct slave *slave)
{
struct net_device *slave_dev = slave->dev;
- static int (* ioctl)(struct net_device *, struct ifreq *, int);
- struct ifreq ifr;
struct ethtool_cmd etool;
+ int res;
/* Fake speed and duplex */
slave->speed = SPEED_100;
slave->duplex = DUPLEX_FULL;
- if (slave_dev->ethtool_ops) {
- int res;
-
- if (!slave_dev->ethtool_ops->get_settings) {
- return -1;
- }
-
- res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
- if (res < 0) {
- return -1;
- }
-
- goto verify;
- }
+ if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings)
+ return -1;
- ioctl = slave_dev->do_ioctl;
- strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
- etool.cmd = ETHTOOL_GSET;
- ifr.ifr_data = (char*)&etool;
- if (!ioctl || (IOCTL(slave_dev, &ifr, SIOCETHTOOL) < 0)) {
+ res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
+ if (res < 0)
return -1;
- }
-verify:
switch (etool.speed) {
case SPEED_10:
case SPEED_100:
static int (* ioctl)(struct net_device *, struct ifreq *, int);
struct ifreq ifr;
struct mii_ioctl_data *mii;
- struct ethtool_value etool;
if (bond->params.use_carrier) {
return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
}
}
- /* try SIOCETHTOOL ioctl, some drivers cache ETHTOOL_GLINK */
- /* for a period of time so we attempt to get link status */
- /* from it last if the above MII ioctls fail... */
+ /*
+ * Some drivers cache ETHTOOL_GLINK for a period of time so we only
+ * attempt to get link status from it if the above MII ioctls fail.
+ */
if (slave_dev->ethtool_ops) {
if (slave_dev->ethtool_ops->get_link) {
u32 link;
}
}
- if (ioctl) {
- strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
- etool.cmd = ETHTOOL_GLINK;
- ifr.ifr_data = (char*)&etool;
- if (IOCTL(slave_dev, &ifr, SIOCETHTOOL) == 0) {
- if (etool.data == 1) {
- return BMSR_LSTATUS;
- } else {
- dprintk("SIOCETHTOOL shows link down\n");
- return 0;
- }
- }
- }
-
/*
* If reporting, report that either there's no dev->do_ioctl,
- * or both SIOCGMIIREG and SIOCETHTOOL failed (meaning that we
+ * or both SIOCGMIIREG and get_link failed (meaning that we
* cannot report link status). If not reporting, pretend
* we're ok.
*/
/*---------------------------------- IOCTL ----------------------------------*/
-int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
+static int bond_sethwaddr(struct net_device *bond_dev,
+ struct net_device *slave_dev)
{
dprintk("bond_dev=%p\n", bond_dev);
dprintk("slave_dev=%p\n", slave_dev);
return 0;
}
-#define BOND_INTERSECT_FEATURES \
- (NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_TSO | NETIF_F_UFO)
+#define BOND_VLAN_FEATURES \
+ (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
+ NETIF_F_HW_VLAN_FILTER)
/*
* Compute the common dev->feature set available to all slaves. Some
- * feature bits are managed elsewhere, so preserve feature bits set on
- * master device that are not part of the examined set.
+ * feature bits are managed elsewhere, so preserve those feature bits
+ * on the master device.
*/
static int bond_compute_features(struct bonding *bond)
{
- unsigned long features = BOND_INTERSECT_FEATURES;
struct slave *slave;
struct net_device *bond_dev = bond->dev;
+ unsigned long features = bond_dev->features;
unsigned short max_hard_header_len = ETH_HLEN;
int i;
+ features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
+ features |= NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
+ NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
+
bond_for_each_slave(bond, slave, i) {
- features &= (slave->dev->features & BOND_INTERSECT_FEATURES);
+ features = netdev_compute_features(features,
+ slave->dev->features);
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
}
- if ((features & NETIF_F_SG) &&
- !(features & NETIF_F_ALL_CSUM))
- features &= ~NETIF_F_SG;
-
- /*
- * features will include NETIF_F_TSO (NETIF_F_UFO) iff all
- * slave devices support NETIF_F_TSO (NETIF_F_UFO), which
- * implies that all slaves also support scatter-gather
- * (NETIF_F_SG), which implies that features also includes
- * NETIF_F_SG. So no need to check whether we have an
- * illegal combination of NETIF_F_{TSO,UFO} and
- * !NETIF_F_SG
- */
-
- features |= (bond_dev->features & ~BOND_INTERSECT_FEATURES);
+ features |= (bond_dev->features & BOND_VLAN_FEATURES);
bond_dev->features = features;
bond_dev->hard_header_len = max_hard_header_len;
goto err_free;
}
+ res = netdev_set_master(slave_dev, bond_dev);
+ if (res) {
+ dprintk("Error %d calling netdev_set_master\n", res);
+ goto err_close;
+ }
/* open the slave since the application closed it */
res = dev_open(slave_dev);
if (res) {
goto err_restore_mac;
}
- res = netdev_set_master(slave_dev, bond_dev);
- if (res) {
- dprintk("Error %d calling netdev_set_master\n", res);
- goto err_close;
- }
-
new_slave->dev = slave_dev;
slave_dev->priv_flags |= IFF_BONDING;
{
int len = strlen(DRV_NAME);
- for (bond_proc_dir = proc_net->subdir; bond_proc_dir;
+ for (bond_proc_dir = init_net.proc_net->subdir; bond_proc_dir;
bond_proc_dir = bond_proc_dir->next) {
if ((bond_proc_dir->namelen == len) &&
!memcmp(bond_proc_dir->name, DRV_NAME, len)) {
}
if (!bond_proc_dir) {
- bond_proc_dir = proc_mkdir(DRV_NAME, proc_net);
+ bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
if (bond_proc_dir) {
bond_proc_dir->owner = THIS_MODULE;
} else {
bond_proc_dir->owner = NULL;
}
} else {
- remove_proc_entry(DRV_NAME, proc_net);
+ remove_proc_entry(DRV_NAME, init_net.proc_net);
bond_proc_dir = NULL;
}
}
/*---------------------------- Hashing Policies -----------------------------*/
/*
- * Hash for the the output device based upon layer 3 and layer 4 data. If
+ * Hash for the output device based upon layer 3 and layer 4 data. If
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
* altogether not IP, mimic bond_xmit_hash_policy_l2()
*/
bond_mc_list_destroy(bond);
/* Release the bonded slaves */
bond_release_all(bond_dev);
- unregister_netdevice(bond_dev);
bond_deinit(bond_dev);
+ unregister_netdevice(bond_dev);
}
#ifdef CONFIG_PROC_FS
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff