net: move MII outside of NET_ETHERNET, fix kconfig warning

[net-next-2.6.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5a6895320b48a8d7774acfb4e6b239713cc6bd9d..d24f54b8c19a3b73ee5d526eddf2169fa7c2db80 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -177,6 +177,13 @@ config NET_SB1000
 
 source "drivers/net/arcnet/Kconfig"
 
+config MII
+       tristate "Generic Media Independent Interface device support"
+       help
+         Most ethernet controllers have MII transceiver either as an external
+         or internal device.  It is safe to say Y or M here even if your
+         ethernet card lacks MII.
+
 source "drivers/net/phy/Kconfig"
 
 #
@@ -212,13 +219,6 @@ menuconfig NET_ETHERNET
 
 if NET_ETHERNET
 
-config MII
-       tristate "Generic Media Independent Interface device support"
-       help
-         Most ethernet controllers have MII transceiver either as an external
-         or internal device.  It is safe to say Y or M here even if your
-         ethernet card lack MII.
-
 config MACB
        tristate "Atmel MACB support"
        depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
@@ -928,6 +928,16 @@ config SMC91X
          The module will be called smc91x.  If you want to compile it as a
          module, say M here and read <file:Documentation/kbuild/modules.txt>.
 
+config PXA168_ETH
+       tristate "Marvell pxa168 ethernet support"
+       depends on CPU_PXA168
+       select PHYLIB
+       help
+         This driver supports the pxa168 Ethernet ports.
+
+         To compile this driver as a module, choose M here. The module
+         will be called pxa168_eth.
+
 config NET_NETX
        tristate "NetX Ethernet support"
        select MII
@@ -2418,7 +2428,7 @@ config UGETH_TX_ON_DEMAND
 
 config MV643XX_ETH
        tristate "Marvell Discovery (643XX) and Orion ethernet support"
-       depends on MV64X60 || PPC32 || PLAT_ORION
+       depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
        select INET_LRO
        select PHYLIB
        help
@@ -2505,6 +2515,18 @@ config S6GMAC
 
 source "drivers/net/stmmac/Kconfig"
 
+config PCH_GBE
+       tristate "PCH Gigabit Ethernet"
+       depends on PCI
+       ---help---
+         This is a gigabit ethernet driver for Topcliff PCH.
+         Topcliff PCH is the platform controller hub that is used in Intel's
+         general embedded platform.
+         Topcliff PCH has Gigabit Ethernet interface.
+         Using this interface, it is able to access system devices connected
+         to Gigabit Ethernet.
+         This driver enables Gigabit Ethernet function.
+
 endif # NETDEV_1000
 
 #
@@ -2793,7 +2815,7 @@ config NIU
 
 config PASEMI_MAC
        tristate "PA Semi 1/10Gbit MAC"
-       depends on PPC_PASEMI && PCI
+       depends on PPC_PASEMI && PCI && INET
        select PHYLIB
        select INET_LRO
        help
@@ -2859,6 +2881,20 @@ config QLGE
          To compile this driver as a module, choose M here: the module
          will be called qlge.
 
+config BNA
+        tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
+        depends on PCI
+        ---help---
+          This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
+          cards.
+          To compile this driver as a module, choose M here: the module
+          will be called bna.
+
+          For general information and support, go to the Brocade support
+          website at:
+
+          <http://support.brocade.com>
+
 source "drivers/net/sfc/Kconfig"
 
 source "drivers/net/benet/Kconfig"
@@ -3192,6 +3228,17 @@ config PPPOE
          which contains instruction on how to use this driver (under 
          the heading "Kernel mode PPPoE").
 
+config PPTP
+       tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
+       depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
+       help
+         Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
+
+         This driver requires pppd plugin to work in client mode or
+         modified pptpd (poptop) to work in server mode.
+         See http://accel-pptp.sourceforge.net/ for information how to
+         utilize this module.
+
 config PPPOATM
        tristate "PPP over ATM"
        depends on ATM && PPP