#include "nouveau_hw.h"
#include "nouveau_encoder.h"
+#include <linux/io-mapping.h>
+
/* these defines are made up */
#define NV_CIO_CRE_44_HEADA 0x0
#define NV_CIO_CRE_44_HEADB 0x3
const bool rw;
};
-static struct methods nv04_methods[] = {
- { "PROM", load_vbios_prom, false },
- { "PRAMIN", load_vbios_pramin, true },
- { "PCIROM", load_vbios_pci, true },
-};
-
-static struct methods nv50_methods[] = {
- { "ACPI", load_vbios_acpi, true },
+static struct methods shadow_methods[] = {
{ "PRAMIN", load_vbios_pramin, true },
{ "PROM", load_vbios_prom, false },
{ "PCIROM", load_vbios_pci, true },
+ { "ACPI", load_vbios_acpi, true },
};
-
-#define METHODCNT 3
+#define NUM_SHADOW_METHODS ARRAY_SIZE(shadow_methods)
static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct methods *methods;
- int i;
+ struct methods *methods = shadow_methods;
int testscore = 3;
- int scores[METHODCNT];
+ int scores[NUM_SHADOW_METHODS], i;
if (nouveau_vbios) {
- methods = nv04_methods;
- for (i = 0; i < METHODCNT; i++)
+ for (i = 0; i < NUM_SHADOW_METHODS; i++)
if (!strcasecmp(nouveau_vbios, methods[i].desc))
break;
- if (i < METHODCNT) {
+ if (i < NUM_SHADOW_METHODS) {
NV_INFO(dev, "Attempting to use BIOS image from %s\n",
methods[i].desc);
NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
}
- if (dev_priv->card_type < NV_50)
- methods = nv04_methods;
- else
- methods = nv50_methods;
-
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < NUM_SHADOW_METHODS; i++) {
NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
methods[i].desc);
data[0] = data[1] = 0; /* avoid reuse of previous image */
}
while (--testscore > 0) {
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < NUM_SHADOW_METHODS; i++) {
if (scores[i] == testscore) {
NV_TRACE(dev, "Using BIOS image from %s\n",
methods[i].desc);
NV_ERROR(bios->dev,
"0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
offset, config, count);
- return -EINVAL;
+ return len;
}
configval = ROM32(bios->data[offset + 11 + config * 4]);
NV_ERROR(bios->dev,
"0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
offset, config, count);
- return -EINVAL;
+ return len;
}
freq = ROM16(bios->data[offset + 12 + config * 2]);
dpe = nouveau_bios_dp_table(dev, dcb, &dummy);
if (!dpe) {
NV_ERROR(dev, "0x%04X: INIT_3A: no encoder table!!\n", offset);
- return -EINVAL;
+ return 3;
}
switch (cond) {
int ret;
auxch = nouveau_i2c_find(dev, bios->display.output->i2c_index);
- if (!auxch)
- return -ENODEV;
+ if (!auxch) {
+ NV_ERROR(dev, "0x%04X: couldn't get auxch\n", offset);
+ return 3;
+ }
ret = nouveau_dp_auxch(auxch, 9, 0xd, &cond, 1);
- if (ret)
- return ret;
+ if (ret) {
+ NV_ERROR(dev, "0x%04X: auxch rd fail: %d\n", offset, ret);
+ return 3;
+ }
if (cond & 1)
iexec->execute = false;
NV_ERROR(bios->dev,
"0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
offset, config, count);
- return -EINVAL;
+ return len;
}
freq = ROM32(bios->data[offset + 11 + config * 4]);
* "mask n" and OR it with "data n" before writing it back to the device
*/
+ struct drm_device *dev = bios->dev;
uint8_t i2c_index = bios->data[offset + 1];
uint8_t i2c_address = bios->data[offset + 2] >> 1;
uint8_t count = bios->data[offset + 3];
"Count: 0x%02X\n",
offset, i2c_index, i2c_address, count);
- chan = init_i2c_device_find(bios->dev, i2c_index);
- if (!chan)
- return -ENODEV;
+ chan = init_i2c_device_find(dev, i2c_index);
+ if (!chan) {
+ NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
+ return len;
+ }
for (i = 0; i < count; i++) {
uint8_t reg = bios->data[offset + 4 + i * 3];
ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
I2C_SMBUS_READ, reg,
I2C_SMBUS_BYTE_DATA, &val);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ NV_ERROR(dev, "0x%04X: i2c rd fail: %d\n", offset, ret);
+ return len;
+ }
BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
"Mask: 0x%02X, Data: 0x%02X\n",
ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
I2C_SMBUS_WRITE, reg,
I2C_SMBUS_BYTE_DATA, &val);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
+ return len;
+ }
}
return len;
* "DCB I2C table entry index", set the register to "data n"
*/
+ struct drm_device *dev = bios->dev;
uint8_t i2c_index = bios->data[offset + 1];
uint8_t i2c_address = bios->data[offset + 2] >> 1;
uint8_t count = bios->data[offset + 3];
"Count: 0x%02X\n",
offset, i2c_index, i2c_address, count);
- chan = init_i2c_device_find(bios->dev, i2c_index);
- if (!chan)
- return -ENODEV;
+ chan = init_i2c_device_find(dev, i2c_index);
+ if (!chan) {
+ NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
+ return len;
+ }
for (i = 0; i < count; i++) {
uint8_t reg = bios->data[offset + 4 + i * 2];
ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
I2C_SMBUS_WRITE, reg,
I2C_SMBUS_BYTE_DATA, &val);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
+ return len;
+ }
}
return len;
* address" on the I2C bus given by "DCB I2C table entry index"
*/
+ struct drm_device *dev = bios->dev;
uint8_t i2c_index = bios->data[offset + 1];
uint8_t i2c_address = bios->data[offset + 2] >> 1;
uint8_t count = bios->data[offset + 3];
struct nouveau_i2c_chan *chan;
struct i2c_msg msg;
uint8_t data[256];
- int i;
+ int ret, i;
if (!iexec->execute)
return len;
"Count: 0x%02X\n",
offset, i2c_index, i2c_address, count);
- chan = init_i2c_device_find(bios->dev, i2c_index);
- if (!chan)
- return -ENODEV;
+ chan = init_i2c_device_find(dev, i2c_index);
+ if (!chan) {
+ NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
+ return len;
+ }
for (i = 0; i < count; i++) {
data[i] = bios->data[offset + 4 + i];
msg.flags = 0;
msg.len = count;
msg.buf = data;
- if (i2c_transfer(&chan->adapter, &msg, 1) != 1)
- return -EIO;
+ ret = i2c_transfer(&chan->adapter, &msg, 1);
+ if (ret != 1) {
+ NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
+ return len;
+ }
}
return len;
* used -- see get_tmds_index_reg()
*/
+ struct drm_device *dev = bios->dev;
uint8_t mlv = bios->data[offset + 1];
uint32_t tmdsaddr = bios->data[offset + 2];
uint8_t mask = bios->data[offset + 3];
offset, mlv, tmdsaddr, mask, data);
reg = get_tmds_index_reg(bios->dev, mlv);
- if (!reg)
- return -EINVAL;
+ if (!reg) {
+ NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
+ return 5;
+ }
bios_wr32(bios, reg,
tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE);
* register is used -- see get_tmds_index_reg()
*/
+ struct drm_device *dev = bios->dev;
uint8_t mlv = bios->data[offset + 1];
uint8_t count = bios->data[offset + 2];
int len = 3 + count * 2;
offset, mlv, count);
reg = get_tmds_index_reg(bios->dev, mlv);
- if (!reg)
- return -EINVAL;
+ if (!reg) {
+ NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
+ return len;
+ }
for (i = 0; i < count; i++) {
uint8_t tmdsaddr = bios->data[offset + 3 + i * 2];
return 3;
}
+static int
+init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+ /*
+ * INIT_LTIME opcode: 0x57 ('V')
+ *
+ * offset (8 bit): opcode
+ * offset + 1 (16 bit): time
+ *
+ * Sleep for "time" miliseconds.
+ */
+
+ unsigned time = ROM16(bios->data[offset + 1]);
+
+ if (!iexec->execute)
+ return 3;
+
+ BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n",
+ offset, time);
+
+ msleep(time);
+
+ return 3;
+}
+
static int
init_zm_reg_sequence(struct nvbios *bios, uint16_t offset,
struct init_exec *iexec)
return 3;
}
+static int
+init_i2c_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+ /*
+ * INIT_I2C_IF opcode: 0x5E ('^')
+ *
+ * offset (8 bit): opcode
+ * offset + 1 (8 bit): DCB I2C table entry index
+ * offset + 2 (8 bit): I2C slave address
+ * offset + 3 (8 bit): I2C register
+ * offset + 4 (8 bit): mask
+ * offset + 5 (8 bit): data
+ *
+ * Read the register given by "I2C register" on the device addressed
+ * by "I2C slave address" on the I2C bus given by "DCB I2C table
+ * entry index". Compare the result AND "mask" to "data".
+ * If they're not equal, skip subsequent opcodes until condition is
+ * inverted (INIT_NOT), or we hit INIT_RESUME
+ */
+
+ uint8_t i2c_index = bios->data[offset + 1];
+ uint8_t i2c_address = bios->data[offset + 2] >> 1;
+ uint8_t reg = bios->data[offset + 3];
+ uint8_t mask = bios->data[offset + 4];
+ uint8_t data = bios->data[offset + 5];
+ struct nouveau_i2c_chan *chan;
+ union i2c_smbus_data val;
+ int ret;
+
+ /* no execute check by design */
+
+ BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X\n",
+ offset, i2c_index, i2c_address);
+
+ chan = init_i2c_device_find(bios->dev, i2c_index);
+ if (!chan)
+ return -ENODEV;
+
+ ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
+ I2C_SMBUS_READ, reg,
+ I2C_SMBUS_BYTE_DATA, &val);
+ if (ret < 0) {
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: [no device], "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reg, mask, data);
+ iexec->execute = 0;
+ return 6;
+ }
+
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reg, val.byte, mask, data);
+
+ iexec->execute = ((val.byte & mask) == data);
+
+ return 6;
+}
+
static int
init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
{
return 5;
}
+static inline void
+bios_md32(struct nvbios *bios, uint32_t reg,
+ uint32_t mask, uint32_t val)
+{
+ bios_wr32(bios, reg, (bios_rd32(bios, reg) & ~mask) | val);
+}
+
+static uint32_t
+peek_fb(struct drm_device *dev, struct io_mapping *fb,
+ uint32_t off)
+{
+ uint32_t val = 0;
+
+ if (off < pci_resource_len(dev->pdev, 1)) {
+ uint8_t __iomem *p =
+ io_mapping_map_atomic_wc(fb, off & PAGE_MASK, KM_USER0);
+
+ val = ioread32(p + (off & ~PAGE_MASK));
+
+ io_mapping_unmap_atomic(p, KM_USER0);
+ }
+
+ return val;
+}
+
+static void
+poke_fb(struct drm_device *dev, struct io_mapping *fb,
+ uint32_t off, uint32_t val)
+{
+ if (off < pci_resource_len(dev->pdev, 1)) {
+ uint8_t __iomem *p =
+ io_mapping_map_atomic_wc(fb, off & PAGE_MASK, KM_USER0);
+
+ iowrite32(val, p + (off & ~PAGE_MASK));
+ wmb();
+
+ io_mapping_unmap_atomic(p, KM_USER0);
+ }
+}
+
+static inline bool
+read_back_fb(struct drm_device *dev, struct io_mapping *fb,
+ uint32_t off, uint32_t val)
+{
+ poke_fb(dev, fb, off, val);
+ return val == peek_fb(dev, fb, off);
+}
+
+static int
+nv04_init_compute_mem(struct nvbios *bios)
+{
+ struct drm_device *dev = bios->dev;
+ uint32_t patt = 0xdeadbeef;
+ struct io_mapping *fb;
+ int i;
+
+ /* Map the framebuffer aperture */
+ fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+ pci_resource_len(dev->pdev, 1));
+ if (!fb)
+ return -ENOMEM;
+
+ /* Sequencer and refresh off */
+ NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
+ bios_md32(bios, NV04_PFB_DEBUG_0, 0, NV04_PFB_DEBUG_0_REFRESH_OFF);
+
+ bios_md32(bios, NV04_PFB_BOOT_0, ~0,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_16MB |
+ NV04_PFB_BOOT_0_RAM_WIDTH_128 |
+ NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_16MBIT);
+
+ for (i = 0; i < 4; i++)
+ poke_fb(dev, fb, 4 * i, patt);
+
+ poke_fb(dev, fb, 0x400000, patt + 1);
+
+ if (peek_fb(dev, fb, 0) == patt + 1) {
+ bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
+ NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_16MBIT);
+ bios_md32(bios, NV04_PFB_DEBUG_0,
+ NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
+
+ for (i = 0; i < 4; i++)
+ poke_fb(dev, fb, 4 * i, patt);
+
+ if ((peek_fb(dev, fb, 0xc) & 0xffff) != (patt & 0xffff))
+ bios_md32(bios, NV04_PFB_BOOT_0,
+ NV04_PFB_BOOT_0_RAM_WIDTH_128 |
+ NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+
+ } else if ((peek_fb(dev, fb, 0xc) & 0xffff0000) !=
+ (patt & 0xffff0000)) {
+ bios_md32(bios, NV04_PFB_BOOT_0,
+ NV04_PFB_BOOT_0_RAM_WIDTH_128 |
+ NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
+
+ } else if (peek_fb(dev, fb, 0) != patt) {
+ if (read_back_fb(dev, fb, 0x800000, patt))
+ bios_md32(bios, NV04_PFB_BOOT_0,
+ NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+ else
+ bios_md32(bios, NV04_PFB_BOOT_0,
+ NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
+
+ bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
+ NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_8MBIT);
+
+ } else if (!read_back_fb(dev, fb, 0x800000, patt)) {
+ bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+
+ }
+
+ /* Refresh on, sequencer on */
+ bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
+ NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
+
+ io_mapping_free(fb);
+ return 0;
+}
+
+static const uint8_t *
+nv05_memory_config(struct nvbios *bios)
+{
+ /* Defaults for BIOSes lacking a memory config table */
+ static const uint8_t default_config_tab[][2] = {
+ { 0x24, 0x00 },
+ { 0x28, 0x00 },
+ { 0x24, 0x01 },
+ { 0x1f, 0x00 },
+ { 0x0f, 0x00 },
+ { 0x17, 0x00 },
+ { 0x06, 0x00 },
+ { 0x00, 0x00 }
+ };
+ int i = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) &
+ NV_PEXTDEV_BOOT_0_RAMCFG) >> 2;
+
+ if (bios->legacy.mem_init_tbl_ptr)
+ return &bios->data[bios->legacy.mem_init_tbl_ptr + 2 * i];
+ else
+ return default_config_tab[i];
+}
+
+static int
+nv05_init_compute_mem(struct nvbios *bios)
+{
+ struct drm_device *dev = bios->dev;
+ const uint8_t *ramcfg = nv05_memory_config(bios);
+ uint32_t patt = 0xdeadbeef;
+ struct io_mapping *fb;
+ int i, v;
+
+ /* Map the framebuffer aperture */
+ fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+ pci_resource_len(dev->pdev, 1));
+ if (!fb)
+ return -ENOMEM;
+
+ /* Sequencer off */
+ NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
+
+ if (bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_UMA_ENABLE)
+ goto out;
+
+ bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
+
+ /* If present load the hardcoded scrambling table */
+ if (bios->legacy.mem_init_tbl_ptr) {
+ uint32_t *scramble_tab = (uint32_t *)&bios->data[
+ bios->legacy.mem_init_tbl_ptr + 0x10];
+
+ for (i = 0; i < 8; i++)
+ bios_wr32(bios, NV04_PFB_SCRAMBLE(i),
+ ROM32(scramble_tab[i]));
+ }
+
+ /* Set memory type/width/length defaults depending on the straps */
+ bios_md32(bios, NV04_PFB_BOOT_0, 0x3f, ramcfg[0]);
+
+ if (ramcfg[1] & 0x80)
+ bios_md32(bios, NV04_PFB_CFG0, 0, NV04_PFB_CFG0_SCRAMBLE);
+
+ bios_md32(bios, NV04_PFB_CFG1, 0x700001, (ramcfg[1] & 1) << 20);
+ bios_md32(bios, NV04_PFB_CFG1, 0, 1);
+
+ /* Probe memory bus width */
+ for (i = 0; i < 4; i++)
+ poke_fb(dev, fb, 4 * i, patt);
+
+ if (peek_fb(dev, fb, 0xc) != patt)
+ bios_md32(bios, NV04_PFB_BOOT_0,
+ NV04_PFB_BOOT_0_RAM_WIDTH_128, 0);
+
+ /* Probe memory length */
+ v = bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_RAM_AMOUNT;
+
+ if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_32MB &&
+ (!read_back_fb(dev, fb, 0x1000000, ++patt) ||
+ !read_back_fb(dev, fb, 0, ++patt)))
+ bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_16MB);
+
+ if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_16MB &&
+ !read_back_fb(dev, fb, 0x800000, ++patt))
+ bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+
+ if (!read_back_fb(dev, fb, 0x400000, ++patt))
+ bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+ NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
+
+out:
+ /* Sequencer on */
+ NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
+
+ io_mapping_free(fb);
+ return 0;
+}
+
+static int
+nv10_init_compute_mem(struct nvbios *bios)
+{
+ struct drm_device *dev = bios->dev;
+ struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+ const int mem_width[] = { 0x10, 0x00, 0x20 };
+ const int mem_width_count = (dev_priv->chipset >= 0x17 ? 3 : 2);
+ uint32_t patt = 0xdeadbeef;
+ struct io_mapping *fb;
+ int i, j, k;
+
+ /* Map the framebuffer aperture */
+ fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+ pci_resource_len(dev->pdev, 1));
+ if (!fb)
+ return -ENOMEM;
+
+ bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
+
+ /* Probe memory bus width */
+ for (i = 0; i < mem_width_count; i++) {
+ bios_md32(bios, NV04_PFB_CFG0, 0x30, mem_width[i]);
+
+ for (j = 0; j < 4; j++) {
+ for (k = 0; k < 4; k++)
+ poke_fb(dev, fb, 0x1c, 0);
+
+ poke_fb(dev, fb, 0x1c, patt);
+ poke_fb(dev, fb, 0x3c, 0);
+
+ if (peek_fb(dev, fb, 0x1c) == patt)
+ goto mem_width_found;
+ }
+ }
+
+mem_width_found:
+ patt <<= 1;
+
+ /* Probe amount of installed memory */
+ for (i = 0; i < 4; i++) {
+ int off = bios_rd32(bios, NV04_PFB_FIFO_DATA) - 0x100000;
+
+ poke_fb(dev, fb, off, patt);
+ poke_fb(dev, fb, 0, 0);
+
+ peek_fb(dev, fb, 0);
+ peek_fb(dev, fb, 0);
+ peek_fb(dev, fb, 0);
+ peek_fb(dev, fb, 0);
+
+ if (peek_fb(dev, fb, off) == patt)
+ goto amount_found;
+ }
+
+ /* IC missing - disable the upper half memory space. */
+ bios_md32(bios, NV04_PFB_CFG0, 0x1000, 0);
+
+amount_found:
+ io_mapping_free(fb);
+ return 0;
+}
+
+static int
+nv20_init_compute_mem(struct nvbios *bios)
+{
+ struct drm_device *dev = bios->dev;
+ struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+ uint32_t mask = (dev_priv->chipset >= 0x25 ? 0x300 : 0x900);
+ uint32_t amount, off;
+ struct io_mapping *fb;
+
+ /* Map the framebuffer aperture */
+ fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+ pci_resource_len(dev->pdev, 1));
+ if (!fb)
+ return -ENOMEM;
+
+ bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
+
+ /* Allow full addressing */
+ bios_md32(bios, NV04_PFB_CFG0, 0, mask);
+
+ amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
+ for (off = amount; off > 0x2000000; off -= 0x2000000)
+ poke_fb(dev, fb, off - 4, off);
+
+ amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
+ if (amount != peek_fb(dev, fb, amount - 4))
+ /* IC missing - disable the upper half memory space. */
+ bios_md32(bios, NV04_PFB_CFG0, mask, 0);
+
+ io_mapping_free(fb);
+ return 0;
+}
+
static int
init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
{
*
* offset (8 bit): opcode
*
- * This opcode is meant to set NV_PFB_CFG0 (0x100200) appropriately so
- * that the hardware can correctly calculate how much VRAM it has
- * (and subsequently report that value in NV_PFB_CSTATUS (0x10020C))
+ * This opcode is meant to set the PFB memory config registers
+ * appropriately so that we can correctly calculate how much VRAM it
+ * has (on nv10 and better chipsets the amount of installed VRAM is
+ * subsequently reported in NV_PFB_CSTATUS (0x10020C)).
*
- * The implementation of this opcode in general consists of two parts:
- * 1) determination of the memory bus width
- * 2) determination of how many of the card's RAM pads have ICs attached
+ * The implementation of this opcode in general consists of several
+ * parts:
*
- * 1) is done by a cunning combination of writes to offsets 0x1c and
- * 0x3c in the framebuffer, and seeing whether the written values are
- * read back correctly. This then affects bits 4-7 of NV_PFB_CFG0
+ * 1) Determination of memory type and density. Only necessary for
+ * really old chipsets, the memory type reported by the strap bits
+ * (0x101000) is assumed to be accurate on nv05 and newer.
*
- * 2) is done by a cunning combination of writes to an offset slightly
- * less than the maximum memory reported by NV_PFB_CSTATUS, then seeing
- * if the test pattern can be read back. This then affects bits 12-15 of
- * NV_PFB_CFG0
+ * 2) Determination of the memory bus width. Usually done by a cunning
+ * combination of writes to offsets 0x1c and 0x3c in the fb, and
+ * seeing whether the written values are read back correctly.
*
- * In this context a "cunning combination" may include multiple reads
- * and writes to varying locations, often alternating the test pattern
- * and 0, doubtless to make sure buffers are filled, residual charges
- * on tracks are removed etc.
+ * Only necessary on nv0x-nv1x and nv34, on the other cards we can
+ * trust the straps.
*
- * Unfortunately, the "cunning combination"s mentioned above, and the
- * changes to the bits in NV_PFB_CFG0 differ with nearly every bios
- * trace I have.
+ * 3) Determination of how many of the card's RAM pads have ICs
+ * attached, usually done by a cunning combination of writes to an
+ * offset slightly less than the maximum memory reported by
+ * NV_PFB_CSTATUS, then seeing if the test pattern can be read back.
*
- * Therefore, we cheat and assume the value of NV_PFB_CFG0 with which
- * we started was correct, and use that instead
+ * This appears to be a NOP on IGPs and NV4x or newer chipsets, both io
+ * logs of the VBIOS and kmmio traces of the binary driver POSTing the
+ * card show nothing being done for this opcode. Why is it still listed
+ * in the table?!
*/
/* no iexec->execute check by design */
- /*
- * This appears to be a NOP on G8x chipsets, both io logs of the VBIOS
- * and kmmio traces of the binary driver POSTing the card show nothing
- * being done for this opcode. why is it still listed in the table?!
- */
-
struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+ int ret;
- if (dev_priv->card_type >= NV_40)
- return 1;
-
- /*
- * On every card I've seen, this step gets done for us earlier in
- * the init scripts
- uint8_t crdata = bios_idxprt_rd(dev, NV_VIO_SRX, 0x01);
- bios_idxprt_wr(dev, NV_VIO_SRX, 0x01, crdata | 0x20);
- */
-
- /*
- * This also has probably been done in the scripts, but an mmio trace of
- * s3 resume shows nvidia doing it anyway (unlike the NV_VIO_SRX write)
- */
- bios_wr32(bios, NV_PFB_REFCTRL, NV_PFB_REFCTRL_VALID_1);
+ if (dev_priv->chipset >= 0x40 ||
+ dev_priv->chipset == 0x1a ||
+ dev_priv->chipset == 0x1f)
+ ret = 0;
+ else if (dev_priv->chipset >= 0x20 &&
+ dev_priv->chipset != 0x34)
+ ret = nv20_init_compute_mem(bios);
+ else if (dev_priv->chipset >= 0x10)
+ ret = nv10_init_compute_mem(bios);
+ else if (dev_priv->chipset >= 0x5)
+ ret = nv05_init_compute_mem(bios);
+ else
+ ret = nv04_init_compute_mem(bios);
- /* write back the saved configuration value */
- bios_wr32(bios, NV_PFB_CFG0, bios->state.saved_nv_pfb_cfg0);
+ if (ret)
+ return ret;
return 1;
}
/* no iexec->execute check by design */
pci_nv_19 = bios_rd32(bios, NV_PBUS_PCI_NV_19);
- bios_wr32(bios, NV_PBUS_PCI_NV_19, 0);
+ bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19 & ~0xf00);
+
bios_wr32(bios, reg, value1);
udelay(10);
uint32_t reg, data;
if (bios->major_version > 2)
- return -ENODEV;
+ return 0;
bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd(
bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20);
reg = ROM32(bios->data[seqtbloffs += 4])) {
switch (reg) {
- case NV_PFB_PRE:
- data = NV_PFB_PRE_CMD_PRECHARGE;
+ case NV04_PFB_PRE:
+ data = NV04_PFB_PRE_CMD_PRECHARGE;
break;
- case NV_PFB_PAD:
- data = NV_PFB_PAD_CKE_NORMAL;
+ case NV04_PFB_PAD:
+ data = NV04_PFB_PAD_CKE_NORMAL;
break;
- case NV_PFB_REF:
- data = NV_PFB_REF_CMD_REFRESH;
+ case NV04_PFB_REF:
+ data = NV04_PFB_REF_CMD_REFRESH;
break;
default:
data = ROM32(bios->data[meminitdata]);
int clock;
if (bios->major_version > 2)
- return -ENODEV;
+ return 0;
clock = ROM16(bios->data[meminitoffs + 4]) * 10;
setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock);
/* no iexec->execute check by design */
uint32_t straps = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
- uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6));
+ uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & 0x40) >> 6;
if (bios->major_version > 2)
- return -ENODEV;
+ return 0;
bios_idxprt_wr(bios, NV_CIO_CRX__COLOR,
NV_CIO_CRE_SCRATCH4__INDEX, cr3c);
* offset + 1 (8 bit): mask
* offset + 2 (8 bit): cmpval
*
- * Test if (NV_PFB_BOOT_0 & "mask") equals "cmpval".
+ * Test if (NV04_PFB_BOOT_0 & "mask") equals "cmpval".
* If condition not met skip subsequent opcodes until condition is
* inverted (INIT_NOT), or we hit INIT_RESUME
*/
if (!iexec->execute)
return 3;
- data = bios_rd32(bios, NV_PFB_BOOT_0) & mask;
+ data = bios_rd32(bios, NV04_PFB_BOOT_0) & mask;
BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
offset, data, cmpval);
*/
struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+ struct nouveau_gpio_engine *pgpio = &dev_priv->engine.gpio;
const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
int i;
- if (dev_priv->card_type != NV_50) {
+ if (dev_priv->card_type < NV_50) {
NV_ERROR(bios->dev, "INIT_GPIO on unsupported chipset\n");
- return -ENODEV;
+ return 1;
}
if (!iexec->execute)
BIOSLOG(bios, "0x%04X: set gpio 0x%02x, state %d\n",
offset, gpio->tag, gpio->state_default);
if (bios->execute)
- nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
+ pgpio->set(bios->dev, gpio->tag, gpio->state_default);
/* The NVIDIA binary driver doesn't appear to actually do
* any of this, my VBIOS does however.
uint8_t index;
int i;
-
- if (!iexec->execute)
- return len;
-
+ /* critical! to know the length of the opcode */;
if (!blocklen) {
NV_ERROR(bios->dev,
"0x%04X: Zero block length - has the M table "
return -EINVAL;
}
+ if (!iexec->execute)
+ return len;
+
strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf;
index = bios->data[bios->ram_restrict_tbl_ptr + strap_ramcfg];
if (!bios->display.output) {
NV_ERROR(dev, "INIT_AUXCH: no active output\n");
- return -EINVAL;
+ return len;
}
auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
if (!auxch) {
NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n",
bios->display.output->i2c_index);
- return -ENODEV;
+ return len;
}
if (!iexec->execute)
ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1);
if (ret) {
NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret);
- return ret;
+ return len;
}
data &= bios->data[offset + 0];
ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1);
if (ret) {
NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret);
- return ret;
+ return len;
}
}
if (!bios->display.output) {
NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n");
- return -EINVAL;
+ return len;
}
auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
if (!auxch) {
NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n",
bios->display.output->i2c_index);
- return -ENODEV;
+ return len;
}
if (!iexec->execute)
ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1);
if (ret) {
NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret);
- return ret;
+ return len;
}
}
return len;
}
+static int
+init_i2c_long_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+ /*
+ * INIT_I2C_LONG_IF opcode: 0x9A ('')
+ *
+ * offset (8 bit): opcode
+ * offset + 1 (8 bit): DCB I2C table entry index
+ * offset + 2 (8 bit): I2C slave address
+ * offset + 3 (16 bit): I2C register
+ * offset + 5 (8 bit): mask
+ * offset + 6 (8 bit): data
+ *
+ * Read the register given by "I2C register" on the device addressed
+ * by "I2C slave address" on the I2C bus given by "DCB I2C table
+ * entry index". Compare the result AND "mask" to "data".
+ * If they're not equal, skip subsequent opcodes until condition is
+ * inverted (INIT_NOT), or we hit INIT_RESUME
+ */
+
+ uint8_t i2c_index = bios->data[offset + 1];
+ uint8_t i2c_address = bios->data[offset + 2] >> 1;
+ uint8_t reglo = bios->data[offset + 3];
+ uint8_t reghi = bios->data[offset + 4];
+ uint8_t mask = bios->data[offset + 5];
+ uint8_t data = bios->data[offset + 6];
+ struct nouveau_i2c_chan *chan;
+ uint8_t buf0[2] = { reghi, reglo };
+ uint8_t buf1[1];
+ struct i2c_msg msg[2] = {
+ { i2c_address, 0, 1, buf0 },
+ { i2c_address, I2C_M_RD, 1, buf1 },
+ };
+ int ret;
+
+ /* no execute check by design */
+
+ BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X\n",
+ offset, i2c_index, i2c_address);
+
+ chan = init_i2c_device_find(bios->dev, i2c_index);
+ if (!chan)
+ return -ENODEV;
+
+
+ ret = i2c_transfer(&chan->adapter, msg, 2);
+ if (ret < 0) {
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X:0x%02X, Value: [no device], "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reghi, reglo, mask, data);
+ iexec->execute = 0;
+ return 7;
+ }
+
+ BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X:0x%02X, Value: 0x%02X, "
+ "Mask: 0x%02X, Data: 0x%02X\n",
+ offset, reghi, reglo, buf1[0], mask, data);
+
+ iexec->execute = ((buf1[0] & mask) == data);
+
+ return 7;
+}
+
static struct init_tbl_entry itbl_entry[] = {
/* command name , id , length , offset , mult , command handler */
/* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */
{ "INIT_ZM_CR" , 0x53, init_zm_cr },
{ "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group },
{ "INIT_CONDITION_TIME" , 0x56, init_condition_time },
+ { "INIT_LTIME" , 0x57, init_ltime },
{ "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence },
/* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */
{ "INIT_SUB_DIRECT" , 0x5B, init_sub_direct },
+ { "INIT_I2C_IF" , 0x5E, init_i2c_if },
{ "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg },
{ "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io },
{ "INIT_COMPUTE_MEM" , 0x63, init_compute_mem },
{ "INIT_97" , 0x97, init_97 },
{ "INIT_AUXCH" , 0x98, init_auxch },
{ "INIT_ZM_AUXCH" , 0x99, init_zm_auxch },
+ { "INIT_I2C_LONG_IF" , 0x9A, init_i2c_long_if },
{ NULL , 0 , NULL }
};
}
#ifdef __powerpc__
/* Powerbook specific quirks */
- if ((dev->pci_device & 0xffff) == 0x0179 ||
- (dev->pci_device & 0xffff) == 0x0189 ||
- (dev->pci_device & 0xffff) == 0x0329) {
- if (script == LVDS_RESET) {
- nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
-
- } else if (script == LVDS_PANEL_ON) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
- bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
- | (1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT,
- bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
-
- } else if (script == LVDS_PANEL_OFF) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
- bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
- & ~(1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT,
- bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
- }
- }
+ if (script == LVDS_RESET &&
+ (dev->pci_device == 0x0179 || dev->pci_device == 0x0189 ||
+ dev->pci_device == 0x0329))
+ nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
#endif
return 0;
*
* For the moment, a quirk will do :)
*/
- if ((dev->pdev->device == 0x01d7) &&
- (dev->pdev->subsystem_vendor == 0x1028) &&
- (dev->pdev->subsystem_device == 0x01c2)) {
+ if (nv_match_device(dev, 0x01d7, 0x1028, 0x01c2))
bios->fp.duallink_transition_clk = 80000;
- }
/* set dual_link flag for EDID case */
if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
bios->display.script_table_ptr,
table[2], table[3], table[0] >= 0x21);
if (!otable) {
- NV_ERROR(dev, "Couldn't find matching output script table\n");
+ NV_DEBUG_KMS(dev, "failed to match any output table\n");
return 1;
}
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing output script 0\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing output script 0\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk == -1) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing output script 1\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing output script 1\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk == -2) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing output script 2\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing output script 2\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk > 0) {
if (script)
script = clkcmptable(bios, script, pxclk);
if (!script) {
- NV_ERROR(dev, "clock script 0 not found\n");
+ NV_DEBUG_KMS(dev, "clock script 0 not found\n");
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing clock script 0\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk < 0) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing clock script 1\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
}
pll_lim->min_p = record[12];
pll_lim->max_p = record[13];
/* where did this go to?? */
- if (limit_match == 0x00614100 || limit_match == 0x00614900)
+ if ((entry[0] & 0xf0) == 0x80)
pll_lim->refclk = 27000;
else
pll_lim->refclk = 100000;
}
tmdstableptr = ROM16(bios->data[bitentry->offset]);
-
- if (tmdstableptr == 0x0) {
+ if (!tmdstableptr) {
NV_ERROR(dev, "Pointer to TMDS table invalid\n");
return -EINVAL;
}
+ NV_INFO(dev, "TMDS table version %d.%d\n",
+ bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
+
/* nv50+ has v2.0, but we don't parse it atm */
- if (bios->data[tmdstableptr] != 0x11) {
- NV_WARN(dev,
- "TMDS table revision %d.%d not currently supported\n",
- bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
+ if (bios->data[tmdstableptr] != 0x11)
return -ENOSYS;
- }
/*
* These two scripts are odd: they don't seem to get run even when
bios->legacy.i2c_indices.crt = bios->data[legacy_i2c_offset];
bios->legacy.i2c_indices.tv = bios->data[legacy_i2c_offset + 1];
bios->legacy.i2c_indices.panel = bios->data[legacy_i2c_offset + 2];
- bios->dcb.i2c[0].write = bios->data[legacy_i2c_offset + 4];
- bios->dcb.i2c[0].read = bios->data[legacy_i2c_offset + 5];
- bios->dcb.i2c[1].write = bios->data[legacy_i2c_offset + 6];
- bios->dcb.i2c[1].read = bios->data[legacy_i2c_offset + 7];
+ if (bios->data[legacy_i2c_offset + 4])
+ bios->dcb.i2c[0].write = bios->data[legacy_i2c_offset + 4];
+ if (bios->data[legacy_i2c_offset + 5])
+ bios->dcb.i2c[0].read = bios->data[legacy_i2c_offset + 5];
+ if (bios->data[legacy_i2c_offset + 6])
+ bios->dcb.i2c[1].write = bios->data[legacy_i2c_offset + 6];
+ if (bios->data[legacy_i2c_offset + 7])
+ bios->dcb.i2c[1].read = bios->data[legacy_i2c_offset + 7];
if (bmplength > 74) {
bios->fmaxvco = ROM32(bmp[67]);
gpio->line = tvdac_gpio[1] >> 4;
gpio->invert = tvdac_gpio[0] & 2;
}
+ } else {
+ /*
+ * No systematic way to store GPIO info on pre-v2.2
+ * DCBs, try to match the PCI device IDs.
+ */
+
+ /* Apple iMac G4 NV18 */
+ if (nv_match_device(dev, 0x0189, 0x10de, 0x0010)) {
+ struct dcb_gpio_entry *gpio = new_gpio_entry(bios);
+
+ gpio->tag = DCB_GPIO_TVDAC0;
+ gpio->line = 4;
+ }
+
}
if (!gpio_table_ptr)
struct drm_device *dev = bios->dev;
/* Gigabyte NX85T */
- if ((dev->pdev->device == 0x0421) &&
- (dev->pdev->subsystem_vendor == 0x1458) &&
- (dev->pdev->subsystem_device == 0x344c)) {
+ if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) {
if (cte->type == DCB_CONNECTOR_HDMI_1)
cte->type = DCB_CONNECTOR_DVI_I;
}
entry->i2c_index = i2c;
entry->heads = heads;
entry->location = DCB_LOC_ON_CHIP;
- /* "or" mostly unused in early gen crt modesetting, 0 is fine */
+ entry->or = 1;
}
static void fabricate_dvi_i_output(struct dcb_table *dcb, bool twoHeads)
if (conf & 0x4 || conf & 0x8)
entry->lvdsconf.use_power_scripts = true;
} else {
- mask = ~0x5;
+ mask = ~0x7;
+ if (conf & 0x2)
+ entry->lvdsconf.use_acpi_for_edid = true;
if (conf & 0x4)
entry->lvdsconf.use_power_scripts = true;
+ entry->lvdsconf.sor.link = (conf & 0x00000030) >> 4;
}
if (conf & mask) {
/*
}
break;
case OUTPUT_TMDS:
- entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
+ if (dcb->version >= 0x40)
+ entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
+ else if (dcb->version >= 0x30)
+ entry->tmdsconf.slave_addr = (conf & 0x00000700) >> 8;
+ else if (dcb->version >= 0x22)
+ entry->tmdsconf.slave_addr = (conf & 0x00000070) >> 4;
+
break;
- case 0xe:
+ case OUTPUT_EOL:
/* weird g80 mobile type that "nv" treats as a terminator */
dcb->entries--;
return false;
case OUTPUT_TV:
entry->tvconf.has_component_output = false;
break;
- case OUTPUT_TMDS:
- /*
- * Invent a DVI-A output, by copying the fields of the DVI-D
- * output; reported to work by math_b on an NV20(!).
- */
- fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
- break;
case OUTPUT_LVDS:
if ((conn & 0x00003f00) != 0x10)
entry->lvdsconf.use_straps_for_mode = true;
dcb->entries = newentries;
}
+static bool
+apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
+{
+ /* Dell Precision M6300
+ * DCB entry 2: 02025312 00000010
+ * DCB entry 3: 02026312 00000020
+ *
+ * Identical, except apparently a different connector on a
+ * different SOR link. Not a clue how we're supposed to know
+ * which one is in use if it even shares an i2c line...
+ *
+ * Ignore the connector on the second SOR link to prevent
+ * nasty problems until this is sorted (assuming it's not a
+ * VBIOS bug).
+ */
+ if (nv_match_device(dev, 0x040d, 0x1028, 0x019b)) {
+ if (*conn == 0x02026312 && *conf == 0x00000020)
+ return false;
+ }
+
+ return true;
+}
+
static int
parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
{
dcb->i2c_table = &bios->data[i2ctabptr];
if (dcb->version >= 0x30)
dcb->i2c_default_indices = dcb->i2c_table[4];
+
+ /*
+ * Parse the "management" I2C bus, used for hardware
+ * monitoring and some external TMDS transmitters.
+ */
+ if (dcb->version >= 0x22) {
+ int idx = (dcb->version >= 0x40 ?
+ dcb->i2c_default_indices & 0xf :
+ 2);
+
+ read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table,
+ idx, &dcb->i2c[idx]);
+ }
}
if (entries > DCB_MAX_NUM_ENTRIES)
if ((connection & 0x0000000f) == 0x0000000f)
continue;
+ if (!apply_dcb_encoder_quirks(dev, i, &connection, &config))
+ continue;
+
NV_TRACEWARN(dev, "Raw DCB entry %d: %08x %08x\n",
dcb->entries, connection, config);
struct nvbios *bios = &dev_priv->vbios;
int i, ret = 0;
- NVLockVgaCrtcs(dev, false);
- if (nv_two_heads(dev))
- NVSetOwner(dev, bios->state.crtchead);
+ /* Reset the BIOS head to 0. */
+ bios->state.crtchead = 0;
if (bios->major_version < 5) /* BMP only */
load_nv17_hw_sequencer_ucode(dev, bios);
}
}
- NVLockVgaCrtcs(dev, true);
-
return ret;
}
nouveau_bios_posted(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- bool was_locked;
unsigned htotal;
if (dev_priv->chipset >= NV_50) {
return true;
}
- was_locked = NVLockVgaCrtcs(dev, false);
htotal = NVReadVgaCrtc(dev, 0, 0x06);
htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x01) << 8;
htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x20) << 4;
htotal |= (NVReadVgaCrtc(dev, 0, 0x25) & 0x01) << 10;
htotal |= (NVReadVgaCrtc(dev, 0, 0x41) & 0x01) << 11;
- NVLockVgaCrtcs(dev, was_locked);
+
return (htotal != 0);
}
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nvbios *bios = &dev_priv->vbios;
- uint32_t saved_nv_pextdev_boot_0;
- bool was_locked;
int ret;
if (!NVInitVBIOS(dev))
if (!bios->major_version) /* we don't run version 0 bios */
return 0;
- /* these will need remembering across a suspend */
- saved_nv_pextdev_boot_0 = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
- bios->state.saved_nv_pfb_cfg0 = bios_rd32(bios, NV_PFB_CFG0);
-
/* init script execution disabled */
bios->execute = false;
/* ... unless card isn't POSTed already */
if (!nouveau_bios_posted(dev)) {
- NV_INFO(dev, "Adaptor not initialised\n");
- if (dev_priv->card_type < NV_40) {
- NV_ERROR(dev, "Unable to POST this chipset\n");
- return -ENODEV;
- }
-
- NV_INFO(dev, "Running VBIOS init tables\n");
+ NV_INFO(dev, "Adaptor not initialised, "
+ "running VBIOS init tables.\n");
bios->execute = true;
}
- bios_wr32(bios, NV_PEXTDEV_BOOT_0, saved_nv_pextdev_boot_0);
-
ret = nouveau_run_vbios_init(dev);
if (ret)
return ret;
/* feature_byte on BMP is poor, but init always sets CR4B */
- was_locked = NVLockVgaCrtcs(dev, false);
if (bios->major_version < 5)
bios->is_mobile = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_4B) & 0x40;
/* all BIT systems need p_f_m_t for digital_min_front_porch */
if (bios->is_mobile || bios->major_version >= 5)
ret = parse_fp_mode_table(dev, bios);
- NVLockVgaCrtcs(dev, was_locked);
/* allow subsequent scripts to execute */
bios->execute = true;
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff