uint32_t val = 0;
if (off < pci_resource_len(dev->pdev, 1)) {
- uint32_t __iomem *p =
+ uint8_t __iomem *p =
io_mapping_map_atomic_wc(fb, off & PAGE_MASK, KM_USER0);
val = ioread32(p + (off & ~PAGE_MASK));
uint32_t off, uint32_t val)
{
if (off < pci_resource_len(dev->pdev, 1)) {
- uint32_t __iomem *p =
+ uint8_t __iomem *p =
io_mapping_map_atomic_wc(fb, off & PAGE_MASK, KM_USER0);
iowrite32(val, p + (off & ~PAGE_MASK));
NV04_PFB_BOOT_0_RAM_AMOUNT,
NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
- } else if (peek_fb(dev, fb, 0) == patt) {
+ } else if (peek_fb(dev, fb, 0) != patt) {
if (read_back_fb(dev, fb, 0x800000, patt))
bios_md32(bios, NV04_PFB_BOOT_0,
NV04_PFB_BOOT_0_RAM_AMOUNT,
}
#ifdef __powerpc__
/* Powerbook specific quirks */
- if ((dev->pci_device & 0xffff) == 0x0179 ||
- (dev->pci_device & 0xffff) == 0x0189 ||
- (dev->pci_device & 0xffff) == 0x0329) {
- if (script == LVDS_RESET) {
- nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
-
- } else if (script == LVDS_PANEL_ON) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
- bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
- | (1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT,
- bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
-
- } else if (script == LVDS_PANEL_OFF) {
- bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
- bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
- & ~(1 << 31));
- bios_wr32(bios, NV_PCRTC_GPIO_EXT,
- bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
- }
- }
+ if (script == LVDS_RESET &&
+ (dev->pci_device == 0x0179 || dev->pci_device == 0x0189 ||
+ dev->pci_device == 0x0329))
+ nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
#endif
return 0;
*
* For the moment, a quirk will do :)
*/
- if ((dev->pdev->device == 0x01d7) &&
- (dev->pdev->subsystem_vendor == 0x1028) &&
- (dev->pdev->subsystem_device == 0x01c2)) {
+ if (nv_match_device(dev, 0x01d7, 0x1028, 0x01c2))
bios->fp.duallink_transition_clk = 80000;
- }
/* set dual_link flag for EDID case */
if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing output script 0\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing output script 0\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk == -1) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing output script 1\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing output script 1\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk == -2) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing output script 2\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing output script 2\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk > 0) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing clock script 0\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk < 0) {
return 1;
}
- NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script);
+ NV_DEBUG_KMS(dev, "0x%04X: parsing clock script 1\n", script);
nouveau_bios_run_init_table(dev, script, dcbent);
}
}
tmdstableptr = ROM16(bios->data[bitentry->offset]);
-
- if (tmdstableptr == 0x0) {
+ if (!tmdstableptr) {
NV_ERROR(dev, "Pointer to TMDS table invalid\n");
return -EINVAL;
}
+ NV_INFO(dev, "TMDS table version %d.%d\n",
+ bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
+
/* nv50+ has v2.0, but we don't parse it atm */
- if (bios->data[tmdstableptr] != 0x11) {
- NV_WARN(dev,
- "TMDS table revision %d.%d not currently supported\n",
- bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
+ if (bios->data[tmdstableptr] != 0x11)
return -ENOSYS;
- }
/*
* These two scripts are odd: they don't seem to get run even when
gpio->line = tvdac_gpio[1] >> 4;
gpio->invert = tvdac_gpio[0] & 2;
}
+ } else {
+ /*
+ * No systematic way to store GPIO info on pre-v2.2
+ * DCBs, try to match the PCI device IDs.
+ */
+
+ /* Apple iMac G4 NV18 */
+ if (nv_match_device(dev, 0x0189, 0x10de, 0x0010)) {
+ struct dcb_gpio_entry *gpio = new_gpio_entry(bios);
+
+ gpio->tag = DCB_GPIO_TVDAC0;
+ gpio->line = 4;
+ }
+
}
if (!gpio_table_ptr)
struct drm_device *dev = bios->dev;
/* Gigabyte NX85T */
- if ((dev->pdev->device == 0x0421) &&
- (dev->pdev->subsystem_vendor == 0x1458) &&
- (dev->pdev->subsystem_device == 0x344c)) {
+ if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) {
if (cte->type == DCB_CONNECTOR_HDMI_1)
cte->type = DCB_CONNECTOR_DVI_I;
}
entry->i2c_index = i2c;
entry->heads = heads;
entry->location = DCB_LOC_ON_CHIP;
- /* "or" mostly unused in early gen crt modesetting, 0 is fine */
+ entry->or = 1;
}
static void fabricate_dvi_i_output(struct dcb_table *dcb, bool twoHeads)
}
break;
case OUTPUT_TMDS:
- if (dcb->version >= 0x22)
- entry->tmdsconf.slave_addr = (conf & 0x00000070) >> 4;
+ if (dcb->version >= 0x40)
+ entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
else if (dcb->version >= 0x30)
entry->tmdsconf.slave_addr = (conf & 0x00000700) >> 8;
- else if (dcb->version >= 0x40)
- entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
+ else if (dcb->version >= 0x22)
+ entry->tmdsconf.slave_addr = (conf & 0x00000070) >> 4;
break;
- case 0xe:
+ case OUTPUT_EOL:
/* weird g80 mobile type that "nv" treats as a terminator */
dcb->entries--;
return false;
* nasty problems until this is sorted (assuming it's not a
* VBIOS bug).
*/
- if ((dev->pdev->device == 0x040d) &&
- (dev->pdev->subsystem_vendor == 0x1028) &&
- (dev->pdev->subsystem_device == 0x019b)) {
+ if (nv_match_device(dev, 0x040d, 0x1028, 0x019b)) {
if (*conn == 0x02026312 && *conf == 0x00000020)
return false;
}