Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

[net-next-2.6.git] / arch / powerpc / boot / dts / lite5200.dts

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b13bc37905deebbda9816616a2d92a0ee61..179a1785d6454dbfdda53a532474dfa4c5c5340e 100644 (file)
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
                        compatible = "fsl,mpc5200-gpio";
                        reg = <0xb00 0x40>;
                        interrupts = <1 7 0>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
                };
 
                gpio@c00 {
                        compatible = "fsl,mpc5200-gpio-wkup";
                        reg = <0xc00 0x40>;
                        interrupts = <1 8 0 0 3 0>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
                };
 
                spi@f00 {
@@ -230,8 +234,8 @@
                        reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 
-                       phy0: ethernet-phy@1 {
-                               reg = <1>;
+                       phy0: ethernet-phy@0 {
+                               reg = <0>;
                        };
                };
 
@@ -255,7 +259,13 @@
                        compatible = "fsl,mpc5200-i2c","fsl-i2c";
                        reg = <0x3d40 0x40>;
                        interrupts = <2 16 0>;
+
+                       eeprom@50 {
+                               compatible = "atmel,24c02";
+                               reg = <0x50>;
+                       };
                };
+
                sram@8000 {
                        compatible = "fsl,mpc5200-sram";
                        reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
                          0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
                          0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
        };
+
+       localbus {
+               compatible = "fsl,mpc5200-lpb","simple-bus";
+               #address-cells = <2>;
+               #size-cells = <1>;
+
+               ranges = <0 0 0xff000000 0x01000000>;
+
+               flash@0,0 {
+                       compatible = "amd,am29lv652d", "cfi-flash";
+                       reg = <0 0 0x01000000>;
+                       bank-width = <1>;
+               };
+       };
 };