mx31moboard: Move usb OTG device registration

[net-next-2.6.git] / arch / arm / mach-mx3 / mach-mx31moboard.c

diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index a7dc5191bf5ea4de9ffaf09bc0397414ddd80745..4bb011afc2a398962492974e096e4d2d81df5125 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -18,7 +18,7 @@
 
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
+#include <linux/gfp.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -305,84 +305,56 @@ static struct imxmmc_platform_data sdhc1_pdata = {
  * this pin is dedicated for all mx31moboard systems, so we do it here
  */
 #define USB_RESET_B    IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-
-static void usb_xcvr_reset(void)
-{
-       gpio_request(USB_RESET_B, "usb-reset");
-       gpio_direction_output(USB_RESET_B, 0);
-       mdelay(1);
-       gpio_set_value(USB_RESET_B, 1);
-}
-
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-                       PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+                     PAD_CTL_ODE_CMOS)
 
 #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void moboard_usbotg_init(void)
-{
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-       gpio_request(OTG_EN_B, "usb-udc-en");
-       gpio_direction_output(OTG_EN_B, 0);
-}
-
-static struct fsl_usb2_platform_data usb_pdata = {
-       .operating_mode = FSL_USB2_DR_DEVICE,
-       .phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int moboard_usbh2_hw_init(struct platform_device *pdev)
+static void usb_xcvr_reset(void)
 {
-       int ret;
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
 
        mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+       mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
+       mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
+       mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
 
-       mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-       ret = gpio_request(USBH2_EN_B, "usbh2-en");
-       if (ret)
-               return ret;
+       gpio_request(OTG_EN_B, "usb-udc-en");
+       gpio_direction_output(OTG_EN_B, 0);
+       gpio_request(USBH2_EN_B, "usbh2-en");
        gpio_direction_output(USBH2_EN_B, 0);
 
-       return 0;
+       gpio_request(USB_RESET_B, "usb-reset");
+       gpio_direction_output(USB_RESET_B, 0);
+       mdelay(1);
+       gpio_set_value(USB_RESET_B, 1);
+       mdelay(1);
 }
 
-static int moboard_usbh2_hw_exit(struct platform_device *pdev)
-{
-       gpio_free(USBH2_EN_B);
-       return 0;
-}
+#if defined(CONFIG_USB_ULPI)
 
 static struct mxc_usbh_platform_data usbh2_pdata = {
-       .init   = moboard_usbh2_hw_init,
-       .exit   = moboard_usbh2_hw_exit,
        .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
        .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
@@ -507,8 +479,6 @@ static void __init mxc_board_init(void)
 
        usb_xcvr_reset();
 
-       moboard_usbotg_init();
-       mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
        moboard_usbh2_init();
 
        switch (mx31moboard_baseboard) {