drivers/scsi/libsas/sas_expander.c

   1 /*
   2  * Serial Attached SCSI (SAS) Expander discovery and configuration
   3  *
   4  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6  *
   7  * This file is licensed under GPLv2.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of the
  12  * License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  22  *
  23  */
  24
  25 #include <linux/scatterlist.h>
  26 #include <linux/blkdev.h>
  27
  28 #include "sas_internal.h"
  29
  30 #include <scsi/scsi_transport.h>
  31 #include <scsi/scsi_transport_sas.h>
  32 #include "../scsi_sas_internal.h"
  33
  34 static int sas_discover_expander(struct domain_device *dev);
  35 static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
  36 static int sas_configure_phy(struct domain_device *dev, int phy_id,
  37                              u8 *sas_addr, int include);
  38 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
  39
  40 /* ---------- SMP task management ---------- */
  41
  42 static void smp_task_timedout(unsigned long _task)
  43 {
  44         struct sas_task *task = (void *) _task;
  45         unsigned long flags;
  46
  47         spin_lock_irqsave(&task->task_state_lock, flags);
  48         if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
  49                 task->task_state_flags |= SAS_TASK_STATE_ABORTED;
  50         spin_unlock_irqrestore(&task->task_state_lock, flags);
  51
  52         complete(&task->completion);
  53 }
  54
  55 static void smp_task_done(struct sas_task *task)
  56 {
  57         if (!del_timer(&task->timer))
  58                 return;
  59         complete(&task->completion);
  60 }
  61
  62 /* Give it some long enough timeout. In seconds. */
  63 #define SMP_TIMEOUT 10
  64
  65 static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
  66                             void *resp, int resp_size)
  67 {
  68         int res, retry;
  69         struct sas_task *task = NULL;
  70         struct sas_internal *i =
  71                 to_sas_internal(dev->port->ha->core.shost->transportt);
  72
  73         for (retry = 0; retry < 3; retry++) {
  74                 task = sas_alloc_task(GFP_KERNEL);
  75                 if (!task)
  76                         return -ENOMEM;
  77
  78                 task->dev = dev;
  79                 task->task_proto = dev->tproto;
  80                 sg_init_one(&task->smp_task.smp_req, req, req_size);
  81                 sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
  82
  83                 task->task_done = smp_task_done;
  84
  85                 task->timer.data = (unsigned long) task;
  86                 task->timer.function = smp_task_timedout;
  87                 task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
  88                 add_timer(&task->timer);
  89
  90                 res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
  91
  92                 if (res) {
  93                         del_timer(&task->timer);
  94                         SAS_DPRINTK("executing SMP task failed:%d\n", res);
  95                         goto ex_err;
  96                 }
  97
  98                 wait_for_completion(&task->completion);
  99                 res = -ECOMM;
 100                 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 101                         SAS_DPRINTK("smp task timed out or aborted\n");
 102                         i->dft->lldd_abort_task(task);
 103                         if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 104                                 SAS_DPRINTK("SMP task aborted and not done\n");
 105                                 goto ex_err;
 106                         }
 107                 }
 108                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
 109                     task->task_status.stat == SAM_GOOD) {
 110                         res = 0;
 111                         break;
 112                 } if (task->task_status.resp == SAS_TASK_COMPLETE &&
 113                       task->task_status.stat == SAS_DATA_UNDERRUN) {
 114                         /* no error, but return the number of bytes of
 115                          * underrun */
 116                         res = task->task_status.residual;
 117                         break;
 118                 } if (task->task_status.resp == SAS_TASK_COMPLETE &&
 119                       task->task_status.stat == SAS_DATA_OVERRUN) {
 120                         res = -EMSGSIZE;
 121                         break;
 122                 } else {
 123                         SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
 124                                     "status 0x%x\n", __func__,
 125                                     SAS_ADDR(dev->sas_addr),
 126                                     task->task_status.resp,
 127                                     task->task_status.stat);
 128                         sas_free_task(task);
 129                         task = NULL;
 130                 }
 131         }
 132 ex_err:
 133         BUG_ON(retry == 3 && task != NULL);
 134         if (task != NULL) {
 135                 sas_free_task(task);
 136         }
 137         return res;
 138 }
 139
 140 /* ---------- Allocations ---------- */
 141
 142 static inline void *alloc_smp_req(int size)
 143 {
 144         u8 *p = kzalloc(size, GFP_KERNEL);
 145         if (p)
 146                 p[0] = SMP_REQUEST;
 147         return p;
 148 }
 149
 150 static inline void *alloc_smp_resp(int size)
 151 {
 152         return kzalloc(size, GFP_KERNEL);
 153 }
 154
 155 /* ---------- Expander configuration ---------- */
 156
 157 static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 158                            void *disc_resp)
 159 {
 160         struct expander_device *ex = &dev->ex_dev;
 161         struct ex_phy *phy = &ex->ex_phy[phy_id];
 162         struct smp_resp *resp = disc_resp;
 163         struct discover_resp *dr = &resp->disc;
 164         struct sas_rphy *rphy = dev->rphy;
 165         int rediscover = (phy->phy != NULL);
 166
 167         if (!rediscover) {
 168                 phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
 169
 170                 /* FIXME: error_handling */
 171                 BUG_ON(!phy->phy);
 172         }
 173
 174         switch (resp->result) {
 175         case SMP_RESP_PHY_VACANT:
 176                 phy->phy_state = PHY_VACANT;
 177                 return;
 178         default:
 179                 phy->phy_state = PHY_NOT_PRESENT;
 180                 return;
 181         case SMP_RESP_FUNC_ACC:
 182                 phy->phy_state = PHY_EMPTY; /* do not know yet */
 183                 break;
 184         }
 185
 186         phy->phy_id = phy_id;
 187         phy->attached_dev_type = dr->attached_dev_type;
 188         phy->linkrate = dr->linkrate;
 189         phy->attached_sata_host = dr->attached_sata_host;
 190         phy->attached_sata_dev  = dr->attached_sata_dev;
 191         phy->attached_sata_ps   = dr->attached_sata_ps;
 192         phy->attached_iproto = dr->iproto << 1;
 193         phy->attached_tproto = dr->tproto << 1;
 194         memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
 195         phy->attached_phy_id = dr->attached_phy_id;
 196         phy->phy_change_count = dr->change_count;
 197         phy->routing_attr = dr->routing_attr;
 198         phy->virtual = dr->virtual;
 199         phy->last_da_index = -1;
 200
 201         phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 202         phy->phy->identify.target_port_protocols = phy->attached_tproto;
 203         phy->phy->identify.phy_identifier = phy_id;
 204         phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
 205         phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
 206         phy->phy->minimum_linkrate = dr->pmin_linkrate;
 207         phy->phy->maximum_linkrate = dr->pmax_linkrate;
 208         phy->phy->negotiated_linkrate = phy->linkrate;
 209
 210         if (!rediscover)
 211                 sas_phy_add(phy->phy);
 212
 213         SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
 214                     SAS_ADDR(dev->sas_addr), phy->phy_id,
 215                     phy->routing_attr == TABLE_ROUTING ? 'T' :
 216                     phy->routing_attr == DIRECT_ROUTING ? 'D' :
 217                     phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
 218                     SAS_ADDR(phy->attached_sas_addr));
 219
 220         return;
 221 }
 222
 223 #define DISCOVER_REQ_SIZE  16
 224 #define DISCOVER_RESP_SIZE 56
 225
 226 static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 227                                       u8 *disc_resp, int single)
 228 {
 229         int i, res;
 230
 231         disc_req[9] = single;
 232         for (i = 1 ; i < 3; i++) {
 233                 struct discover_resp *dr;
 234
 235                 res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
 236                                        disc_resp, DISCOVER_RESP_SIZE);
 237                 if (res)
 238                         return res;
 239                 /* This is detecting a failure to transmit inital
 240                  * dev to host FIS as described in section G.5 of
 241                  * sas-2 r 04b */
 242                 dr = &((struct smp_resp *)disc_resp)->disc;
 243                 if (!(dr->attached_dev_type == 0 &&
 244                       dr->attached_sata_dev))
 245                         break;
 246                 /* In order to generate the dev to host FIS, we
 247                  * send a link reset to the expander port */
 248                 sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL);
 249                 /* Wait for the reset to trigger the negotiation */
 250                 msleep(500);
 251         }
 252         sas_set_ex_phy(dev, single, disc_resp);
 253         return 0;
 254 }
 255
 256 static int sas_ex_phy_discover(struct domain_device *dev, int single)
 257 {
 258         struct expander_device *ex = &dev->ex_dev;
 259         int  res = 0;
 260         u8   *disc_req;
 261         u8   *disc_resp;
 262
 263         disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
 264         if (!disc_req)
 265                 return -ENOMEM;
 266
 267         disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE);
 268         if (!disc_resp) {
 269                 kfree(disc_req);
 270                 return -ENOMEM;
 271         }
 272
 273         disc_req[1] = SMP_DISCOVER;
 274
 275         if (0 <= single && single < ex->num_phys) {
 276                 res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single);
 277         } else {
 278                 int i;
 279
 280                 for (i = 0; i < ex->num_phys; i++) {
 281                         res = sas_ex_phy_discover_helper(dev, disc_req,
 282                                                          disc_resp, i);
 283                         if (res)
 284                                 goto out_err;
 285                 }
 286         }
 287 out_err:
 288         kfree(disc_resp);
 289         kfree(disc_req);
 290         return res;
 291 }
 292
 293 static int sas_expander_discover(struct domain_device *dev)
 294 {
 295         struct expander_device *ex = &dev->ex_dev;
 296         int res = -ENOMEM;
 297
 298         ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
 299         if (!ex->ex_phy)
 300                 return -ENOMEM;
 301
 302         res = sas_ex_phy_discover(dev, -1);
 303         if (res)
 304                 goto out_err;
 305
 306         return 0;
 307  out_err:
 308         kfree(ex->ex_phy);
 309         ex->ex_phy = NULL;
 310         return res;
 311 }
 312
 313 #define MAX_EXPANDER_PHYS 128
 314
 315 static void ex_assign_report_general(struct domain_device *dev,
 316                                             struct smp_resp *resp)
 317 {
 318         struct report_general_resp *rg = &resp->rg;
 319
 320         dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
 321         dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
 322         dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
 323         dev->ex_dev.conf_route_table = rg->conf_route_table;
 324         dev->ex_dev.configuring = rg->configuring;
 325         memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
 326 }
 327
 328 #define RG_REQ_SIZE   8
 329 #define RG_RESP_SIZE 32
 330
 331 static int sas_ex_general(struct domain_device *dev)
 332 {
 333         u8 *rg_req;
 334         struct smp_resp *rg_resp;
 335         int res;
 336         int i;
 337
 338         rg_req = alloc_smp_req(RG_REQ_SIZE);
 339         if (!rg_req)
 340                 return -ENOMEM;
 341
 342         rg_resp = alloc_smp_resp(RG_RESP_SIZE);
 343         if (!rg_resp) {
 344                 kfree(rg_req);
 345                 return -ENOMEM;
 346         }
 347
 348         rg_req[1] = SMP_REPORT_GENERAL;
 349
 350         for (i = 0; i < 5; i++) {
 351                 res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
 352                                        RG_RESP_SIZE);
 353
 354                 if (res) {
 355                         SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
 356                                     SAS_ADDR(dev->sas_addr), res);
 357                         goto out;
 358                 } else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
 359                         SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
 360                                     SAS_ADDR(dev->sas_addr), rg_resp->result);
 361                         res = rg_resp->result;
 362                         goto out;
 363                 }
 364
 365                 ex_assign_report_general(dev, rg_resp);
 366
 367                 if (dev->ex_dev.configuring) {
 368                         SAS_DPRINTK("RG: ex %llx self-configuring...\n",
 369                                     SAS_ADDR(dev->sas_addr));
 370                         schedule_timeout_interruptible(5*HZ);
 371                 } else
 372                         break;
 373         }
 374 out:
 375         kfree(rg_req);
 376         kfree(rg_resp);
 377         return res;
 378 }
 379
 380 static void ex_assign_manuf_info(struct domain_device *dev, void
 381                                         *_mi_resp)
 382 {
 383         u8 *mi_resp = _mi_resp;
 384         struct sas_rphy *rphy = dev->rphy;
 385         struct sas_expander_device *edev = rphy_to_expander_device(rphy);
 386
 387         memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
 388         memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
 389         memcpy(edev->product_rev, mi_resp + 36,
 390                SAS_EXPANDER_PRODUCT_REV_LEN);
 391
 392         if (mi_resp[8] & 1) {
 393                 memcpy(edev->component_vendor_id, mi_resp + 40,
 394                        SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
 395                 edev->component_id = mi_resp[48] << 8 | mi_resp[49];
 396                 edev->component_revision_id = mi_resp[50];
 397         }
 398 }
 399
 400 #define MI_REQ_SIZE   8
 401 #define MI_RESP_SIZE 64
 402
 403 static int sas_ex_manuf_info(struct domain_device *dev)
 404 {
 405         u8 *mi_req;
 406         u8 *mi_resp;
 407         int res;
 408
 409         mi_req = alloc_smp_req(MI_REQ_SIZE);
 410         if (!mi_req)
 411                 return -ENOMEM;
 412
 413         mi_resp = alloc_smp_resp(MI_RESP_SIZE);
 414         if (!mi_resp) {
 415                 kfree(mi_req);
 416                 return -ENOMEM;
 417         }
 418
 419         mi_req[1] = SMP_REPORT_MANUF_INFO;
 420
 421         res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
 422         if (res) {
 423                 SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
 424                             SAS_ADDR(dev->sas_addr), res);
 425                 goto out;
 426         } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
 427                 SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
 428                             SAS_ADDR(dev->sas_addr), mi_resp[2]);
 429                 goto out;
 430         }
 431
 432         ex_assign_manuf_info(dev, mi_resp);
 433 out:
 434         kfree(mi_req);
 435         kfree(mi_resp);
 436         return res;
 437 }
 438
 439 #define PC_REQ_SIZE  44
 440 #define PC_RESP_SIZE 8
 441
 442 int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 443                         enum phy_func phy_func,
 444                         struct sas_phy_linkrates *rates)
 445 {
 446         u8 *pc_req;
 447         u8 *pc_resp;
 448         int res;
 449
 450         pc_req = alloc_smp_req(PC_REQ_SIZE);
 451         if (!pc_req)
 452                 return -ENOMEM;
 453
 454         pc_resp = alloc_smp_resp(PC_RESP_SIZE);
 455         if (!pc_resp) {
 456                 kfree(pc_req);
 457                 return -ENOMEM;
 458         }
 459
 460         pc_req[1] = SMP_PHY_CONTROL;
 461         pc_req[9] = phy_id;
 462         pc_req[10]= phy_func;
 463         if (rates) {
 464                 pc_req[32] = rates->minimum_linkrate << 4;
 465                 pc_req[33] = rates->maximum_linkrate << 4;
 466         }
 467
 468         res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
 469
 470         kfree(pc_resp);
 471         kfree(pc_req);
 472         return res;
 473 }
 474
 475 static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
 476 {
 477         struct expander_device *ex = &dev->ex_dev;
 478         struct ex_phy *phy = &ex->ex_phy[phy_id];
 479
 480         sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
 481         phy->linkrate = SAS_PHY_DISABLED;
 482 }
 483
 484 static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
 485 {
 486         struct expander_device *ex = &dev->ex_dev;
 487         int i;
 488
 489         for (i = 0; i < ex->num_phys; i++) {
 490                 struct ex_phy *phy = &ex->ex_phy[i];
 491
 492                 if (phy->phy_state == PHY_VACANT ||
 493                     phy->phy_state == PHY_NOT_PRESENT)
 494                         continue;
 495
 496                 if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
 497                         sas_ex_disable_phy(dev, i);
 498         }
 499 }
 500
 501 static int sas_dev_present_in_domain(struct asd_sas_port *port,
 502                                             u8 *sas_addr)
 503 {
 504         struct domain_device *dev;
 505
 506         if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
 507                 return 1;
 508         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
 509                 if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
 510                         return 1;
 511         }
 512         return 0;
 513 }
 514
 515 #define RPEL_REQ_SIZE   16
 516 #define RPEL_RESP_SIZE  32
 517 int sas_smp_get_phy_events(struct sas_phy *phy)
 518 {
 519         int res;
 520         u8 *req;
 521         u8 *resp;
 522         struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
 523         struct domain_device *dev = sas_find_dev_by_rphy(rphy);
 524
 525         req = alloc_smp_req(RPEL_REQ_SIZE);
 526         if (!req)
 527                 return -ENOMEM;
 528
 529         resp = alloc_smp_resp(RPEL_RESP_SIZE);
 530         if (!resp) {
 531                 kfree(req);
 532                 return -ENOMEM;
 533         }
 534
 535         req[1] = SMP_REPORT_PHY_ERR_LOG;
 536         req[9] = phy->number;
 537
 538         res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
 539                                     resp, RPEL_RESP_SIZE);
 540
 541         if (!res)
 542                 goto out;
 543
 544         phy->invalid_dword_count = scsi_to_u32(&resp[12]);
 545         phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
 546         phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
 547         phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
 548
 549  out:
 550         kfree(resp);
 551         return res;
 552
 553 }
 554
 555 #ifdef CONFIG_SCSI_SAS_ATA
 556
 557 #define RPS_REQ_SIZE  16
 558 #define RPS_RESP_SIZE 60
 559
 560 static int sas_get_report_phy_sata(struct domain_device *dev,
 561                                           int phy_id,
 562                                           struct smp_resp *rps_resp)
 563 {
 564         int res;
 565         u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
 566         u8 *resp = (u8 *)rps_resp;
 567
 568         if (!rps_req)
 569                 return -ENOMEM;
 570
 571         rps_req[1] = SMP_REPORT_PHY_SATA;
 572         rps_req[9] = phy_id;
 573
 574         res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
 575                                     rps_resp, RPS_RESP_SIZE);
 576
 577         /* 0x34 is the FIS type for the D2H fis.  There's a potential
 578          * standards cockup here.  sas-2 explicitly specifies the FIS
 579          * should be encoded so that FIS type is in resp[24].
 580          * However, some expanders endian reverse this.  Undo the
 581          * reversal here */
 582         if (!res && resp[27] == 0x34 && resp[24] != 0x34) {
 583                 int i;
 584
 585                 for (i = 0; i < 5; i++) {
 586                         int j = 24 + (i*4);
 587                         u8 a, b;
 588                         a = resp[j + 0];
 589                         b = resp[j + 1];
 590                         resp[j + 0] = resp[j + 3];
 591                         resp[j + 1] = resp[j + 2];
 592                         resp[j + 2] = b;
 593                         resp[j + 3] = a;
 594                 }
 595         }
 596
 597         kfree(rps_req);
 598         return res;
 599 }
 600 #endif
 601
 602 static void sas_ex_get_linkrate(struct domain_device *parent,
 603                                        struct domain_device *child,
 604                                        struct ex_phy *parent_phy)
 605 {
 606         struct expander_device *parent_ex = &parent->ex_dev;
 607         struct sas_port *port;
 608         int i;
 609
 610         child->pathways = 0;
 611
 612         port = parent_phy->port;
 613
 614         for (i = 0; i < parent_ex->num_phys; i++) {
 615                 struct ex_phy *phy = &parent_ex->ex_phy[i];
 616
 617                 if (phy->phy_state == PHY_VACANT ||
 618                     phy->phy_state == PHY_NOT_PRESENT)
 619                         continue;
 620
 621                 if (SAS_ADDR(phy->attached_sas_addr) ==
 622                     SAS_ADDR(child->sas_addr)) {
 623
 624                         child->min_linkrate = min(parent->min_linkrate,
 625                                                   phy->linkrate);
 626                         child->max_linkrate = max(parent->max_linkrate,
 627                                                   phy->linkrate);
 628                         child->pathways++;
 629                         sas_port_add_phy(port, phy->phy);
 630                 }
 631         }
 632         child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
 633         child->pathways = min(child->pathways, parent->pathways);
 634 }
 635
 636 static struct domain_device *sas_ex_discover_end_dev(
 637         struct domain_device *parent, int phy_id)
 638 {
 639         struct expander_device *parent_ex = &parent->ex_dev;
 640         struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
 641         struct domain_device *child = NULL;
 642         struct sas_rphy *rphy;
 643         int res;
 644
 645         if (phy->attached_sata_host || phy->attached_sata_ps)
 646                 return NULL;
 647
 648         child = kzalloc(sizeof(*child), GFP_KERNEL);
 649         if (!child)
 650                 return NULL;
 651
 652         child->parent = parent;
 653         child->port   = parent->port;
 654         child->iproto = phy->attached_iproto;
 655         memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 656         sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
 657         if (!phy->port) {
 658                 phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
 659                 if (unlikely(!phy->port))
 660                         goto out_err;
 661                 if (unlikely(sas_port_add(phy->port) != 0)) {
 662                         sas_port_free(phy->port);
 663                         goto out_err;
 664                 }
 665         }
 666         sas_ex_get_linkrate(parent, child, phy);
 667
 668 #ifdef CONFIG_SCSI_SAS_ATA
 669         if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
 670                 child->dev_type = SATA_DEV;
 671                 if (phy->attached_tproto & SAS_PROTOCOL_STP)
 672                         child->tproto = phy->attached_tproto;
 673                 if (phy->attached_sata_dev)
 674                         child->tproto |= SATA_DEV;
 675                 res = sas_get_report_phy_sata(parent, phy_id,
 676                                               &child->sata_dev.rps_resp);
 677                 if (res) {
 678                         SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
 679                                     "0x%x\n", SAS_ADDR(parent->sas_addr),
 680                                     phy_id, res);
 681                         goto out_free;
 682                 }
 683                 memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
 684                        sizeof(struct dev_to_host_fis));
 685
 686                 rphy = sas_end_device_alloc(phy->port);
 687                 if (unlikely(!rphy))
 688                         goto out_free;
 689
 690                 sas_init_dev(child);
 691
 692                 child->rphy = rphy;
 693
 694                 spin_lock_irq(&parent->port->dev_list_lock);
 695                 list_add_tail(&child->dev_list_node, &parent->port->dev_list);
 696                 spin_unlock_irq(&parent->port->dev_list_lock);
 697
 698                 res = sas_discover_sata(child);
 699                 if (res) {
 700                         SAS_DPRINTK("sas_discover_sata() for device %16llx at "
 701                                     "%016llx:0x%x returned 0x%x\n",
 702                                     SAS_ADDR(child->sas_addr),
 703                                     SAS_ADDR(parent->sas_addr), phy_id, res);
 704                         goto out_list_del;
 705                 }
 706         } else
 707 #endif
 708           if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
 709                 child->dev_type = SAS_END_DEV;
 710                 rphy = sas_end_device_alloc(phy->port);
 711                 /* FIXME: error handling */
 712                 if (unlikely(!rphy))
 713                         goto out_free;
 714                 child->tproto = phy->attached_tproto;
 715                 sas_init_dev(child);
 716
 717                 child->rphy = rphy;
 718                 sas_fill_in_rphy(child, rphy);
 719
 720                 spin_lock_irq(&parent->port->dev_list_lock);
 721                 list_add_tail(&child->dev_list_node, &parent->port->dev_list);
 722                 spin_unlock_irq(&parent->port->dev_list_lock);
 723
 724                 res = sas_discover_end_dev(child);
 725                 if (res) {
 726                         SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
 727                                     "at %016llx:0x%x returned 0x%x\n",
 728                                     SAS_ADDR(child->sas_addr),
 729                                     SAS_ADDR(parent->sas_addr), phy_id, res);
 730                         goto out_list_del;
 731                 }
 732         } else {
 733                 SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
 734                             phy->attached_tproto, SAS_ADDR(parent->sas_addr),
 735                             phy_id);
 736                 goto out_free;
 737         }
 738
 739         list_add_tail(&child->siblings, &parent_ex->children);
 740         return child;
 741
 742  out_list_del:
 743         sas_rphy_free(child->rphy);
 744         child->rphy = NULL;
 745         list_del(&child->dev_list_node);
 746  out_free:
 747         sas_port_delete(phy->port);
 748  out_err:
 749         phy->port = NULL;
 750         kfree(child);
 751         return NULL;
 752 }
 753
 754 /* See if this phy is part of a wide port */
 755 static int sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
 756 {
 757         struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
 758         int i;
 759
 760         for (i = 0; i < parent->ex_dev.num_phys; i++) {
 761                 struct ex_phy *ephy = &parent->ex_dev.ex_phy[i];
 762
 763                 if (ephy == phy)
 764                         continue;
 765
 766                 if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
 767                             SAS_ADDR_SIZE) && ephy->port) {
 768                         sas_port_add_phy(ephy->port, phy->phy);
 769                         phy->port = ephy->port;
 770                         phy->phy_state = PHY_DEVICE_DISCOVERED;
 771                         return 0;
 772                 }
 773         }
 774
 775         return -ENODEV;
 776 }
 777
 778 static struct domain_device *sas_ex_discover_expander(
 779         struct domain_device *parent, int phy_id)
 780 {
 781         struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
 782         struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
 783         struct domain_device *child = NULL;
 784         struct sas_rphy *rphy;
 785         struct sas_expander_device *edev;
 786         struct asd_sas_port *port;
 787         int res;
 788
 789         if (phy->routing_attr == DIRECT_ROUTING) {
 790                 SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
 791                             "allowed\n",
 792                             SAS_ADDR(parent->sas_addr), phy_id,
 793                             SAS_ADDR(phy->attached_sas_addr),
 794                             phy->attached_phy_id);
 795                 return NULL;
 796         }
 797         child = kzalloc(sizeof(*child), GFP_KERNEL);
 798         if (!child)
 799                 return NULL;
 800
 801         phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
 802         /* FIXME: better error handling */
 803         BUG_ON(sas_port_add(phy->port) != 0);
 804
 805
 806         switch (phy->attached_dev_type) {
 807         case EDGE_DEV:
 808                 rphy = sas_expander_alloc(phy->port,
 809                                           SAS_EDGE_EXPANDER_DEVICE);
 810                 break;
 811         case FANOUT_DEV:
 812                 rphy = sas_expander_alloc(phy->port,
 813                                           SAS_FANOUT_EXPANDER_DEVICE);
 814                 break;
 815         default:
 816                 rphy = NULL;    /* shut gcc up */
 817                 BUG();
 818         }
 819         port = parent->port;
 820         child->rphy = rphy;
 821         edev = rphy_to_expander_device(rphy);
 822         child->dev_type = phy->attached_dev_type;
 823         child->parent = parent;
 824         child->port = port;
 825         child->iproto = phy->attached_iproto;
 826         child->tproto = phy->attached_tproto;
 827         memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 828         sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
 829         sas_ex_get_linkrate(parent, child, phy);
 830         edev->level = parent_ex->level + 1;
 831         parent->port->disc.max_level = max(parent->port->disc.max_level,
 832                                            edev->level);
 833         sas_init_dev(child);
 834         sas_fill_in_rphy(child, rphy);
 835         sas_rphy_add(rphy);
 836
 837         spin_lock_irq(&parent->port->dev_list_lock);
 838         list_add_tail(&child->dev_list_node, &parent->port->dev_list);
 839         spin_unlock_irq(&parent->port->dev_list_lock);
 840
 841         res = sas_discover_expander(child);
 842         if (res) {
 843                 kfree(child);
 844                 return NULL;
 845         }
 846         list_add_tail(&child->siblings, &parent->ex_dev.children);
 847         return child;
 848 }
 849
 850 static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 851 {
 852         struct expander_device *ex = &dev->ex_dev;
 853         struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
 854         struct domain_device *child = NULL;
 855         int res = 0;
 856
 857         /* Phy state */
 858         if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
 859                 if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
 860                         res = sas_ex_phy_discover(dev, phy_id);
 861                 if (res)
 862                         return res;
 863         }
 864
 865         /* Parent and domain coherency */
 866         if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
 867                              SAS_ADDR(dev->port->sas_addr))) {
 868                 sas_add_parent_port(dev, phy_id);
 869                 return 0;
 870         }
 871         if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
 872                             SAS_ADDR(dev->parent->sas_addr))) {
 873                 sas_add_parent_port(dev, phy_id);
 874                 if (ex_phy->routing_attr == TABLE_ROUTING)
 875                         sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
 876                 return 0;
 877         }
 878
 879         if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
 880                 sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
 881
 882         if (ex_phy->attached_dev_type == NO_DEVICE) {
 883                 if (ex_phy->routing_attr == DIRECT_ROUTING) {
 884                         memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 885                         sas_configure_routing(dev, ex_phy->attached_sas_addr);
 886                 }
 887                 return 0;
 888         } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
 889                 return 0;
 890
 891         if (ex_phy->attached_dev_type != SAS_END_DEV &&
 892             ex_phy->attached_dev_type != FANOUT_DEV &&
 893             ex_phy->attached_dev_type != EDGE_DEV) {
 894                 SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
 895                             "phy 0x%x\n", ex_phy->attached_dev_type,
 896                             SAS_ADDR(dev->sas_addr),
 897                             phy_id);
 898                 return 0;
 899         }
 900
 901         res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
 902         if (res) {
 903                 SAS_DPRINTK("configure routing for dev %016llx "
 904                             "reported 0x%x. Forgotten\n",
 905                             SAS_ADDR(ex_phy->attached_sas_addr), res);
 906                 sas_disable_routing(dev, ex_phy->attached_sas_addr);
 907                 return res;
 908         }
 909
 910         res = sas_ex_join_wide_port(dev, phy_id);
 911         if (!res) {
 912                 SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
 913                             phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
 914                 return res;
 915         }
 916
 917         switch (ex_phy->attached_dev_type) {
 918         case SAS_END_DEV:
 919                 child = sas_ex_discover_end_dev(dev, phy_id);
 920                 break;
 921         case FANOUT_DEV:
 922                 if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
 923                         SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
 924                                     "attached to ex %016llx phy 0x%x\n",
 925                                     SAS_ADDR(ex_phy->attached_sas_addr),
 926                                     ex_phy->attached_phy_id,
 927                                     SAS_ADDR(dev->sas_addr),
 928                                     phy_id);
 929                         sas_ex_disable_phy(dev, phy_id);
 930                         break;
 931                 } else
 932                         memcpy(dev->port->disc.fanout_sas_addr,
 933                                ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
 934                 /* fallthrough */
 935         case EDGE_DEV:
 936                 child = sas_ex_discover_expander(dev, phy_id);
 937                 break;
 938         default:
 939                 break;
 940         }
 941
 942         if (child) {
 943                 int i;
 944
 945                 for (i = 0; i < ex->num_phys; i++) {
 946                         if (ex->ex_phy[i].phy_state == PHY_VACANT ||
 947                             ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
 948                                 continue;
 949                         /*
 950                          * Due to races, the phy might not get added to the
 951                          * wide port, so we add the phy to the wide port here.
 952                          */
 953                         if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
 954                             SAS_ADDR(child->sas_addr)) {
 955                                 ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
 956                                 res = sas_ex_join_wide_port(dev, i);
 957                                 if (!res)
 958                                         SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
 959                                                     i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
 960
 961                         }
 962                 }
 963         }
 964
 965         return res;
 966 }
 967
 968 static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
 969 {
 970         struct expander_device *ex = &dev->ex_dev;
 971         int i;
 972
 973         for (i = 0; i < ex->num_phys; i++) {
 974                 struct ex_phy *phy = &ex->ex_phy[i];
 975
 976                 if (phy->phy_state == PHY_VACANT ||
 977                     phy->phy_state == PHY_NOT_PRESENT)
 978                         continue;
 979
 980                 if ((phy->attached_dev_type == EDGE_DEV ||
 981                      phy->attached_dev_type == FANOUT_DEV) &&
 982                     phy->routing_attr == SUBTRACTIVE_ROUTING) {
 983
 984                         memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
 985
 986                         return 1;
 987                 }
 988         }
 989         return 0;
 990 }
 991
 992 static int sas_check_level_subtractive_boundary(struct domain_device *dev)
 993 {
 994         struct expander_device *ex = &dev->ex_dev;
 995         struct domain_device *child;
 996         u8 sub_addr[8] = {0, };
 997
 998         list_for_each_entry(child, &ex->children, siblings) {
 999                 if (child->dev_type != EDGE_DEV &&
1000                     child->dev_type != FANOUT_DEV)
1001                         continue;
1002                 if (sub_addr[0] == 0) {
1003                         sas_find_sub_addr(child, sub_addr);
1004                         continue;
1005                 } else {
1006                         u8 s2[8];
1007
1008                         if (sas_find_sub_addr(child, s2) &&
1009                             (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
1010
1011                                 SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
1012                                             "diverges from subtractive "
1013                                             "boundary %016llx\n",
1014                                             SAS_ADDR(dev->sas_addr),
1015                                             SAS_ADDR(child->sas_addr),
1016                                             SAS_ADDR(s2),
1017                                             SAS_ADDR(sub_addr));
1018
1019                                 sas_ex_disable_port(child, s2);
1020                         }
1021                 }
1022         }
1023         return 0;
1024 }
1025 /**
1026  * sas_ex_discover_devices -- discover devices attached to this expander
1027  * dev: pointer to the expander domain device
1028  * single: if you want to do a single phy, else set to -1;
1029  *
1030  * Configure this expander for use with its devices and register the
1031  * devices of this expander.
1032  */
1033 static int sas_ex_discover_devices(struct domain_device *dev, int single)
1034 {
1035         struct expander_device *ex = &dev->ex_dev;
1036         int i = 0, end = ex->num_phys;
1037         int res = 0;
1038
1039         if (0 <= single && single < end) {
1040                 i = single;
1041                 end = i+1;
1042         }
1043
1044         for ( ; i < end; i++) {
1045                 struct ex_phy *ex_phy = &ex->ex_phy[i];
1046
1047                 if (ex_phy->phy_state == PHY_VACANT ||
1048                     ex_phy->phy_state == PHY_NOT_PRESENT ||
1049                     ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
1050                         continue;
1051
1052                 switch (ex_phy->linkrate) {
1053                 case SAS_PHY_DISABLED:
1054                 case SAS_PHY_RESET_PROBLEM:
1055                 case SAS_SATA_PORT_SELECTOR:
1056                         continue;
1057                 default:
1058                         res = sas_ex_discover_dev(dev, i);
1059                         if (res)
1060                                 break;
1061                         continue;
1062                 }
1063         }
1064
1065         if (!res)
1066                 sas_check_level_subtractive_boundary(dev);
1067
1068         return res;
1069 }
1070
1071 static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
1072 {
1073         struct expander_device *ex = &dev->ex_dev;
1074         int i;
1075         u8  *sub_sas_addr = NULL;
1076
1077         if (dev->dev_type != EDGE_DEV)
1078                 return 0;
1079
1080         for (i = 0; i < ex->num_phys; i++) {
1081                 struct ex_phy *phy = &ex->ex_phy[i];
1082
1083                 if (phy->phy_state == PHY_VACANT ||
1084                     phy->phy_state == PHY_NOT_PRESENT)
1085                         continue;
1086
1087                 if ((phy->attached_dev_type == FANOUT_DEV ||
1088                      phy->attached_dev_type == EDGE_DEV) &&
1089                     phy->routing_attr == SUBTRACTIVE_ROUTING) {
1090
1091                         if (!sub_sas_addr)
1092                                 sub_sas_addr = &phy->attached_sas_addr[0];
1093                         else if (SAS_ADDR(sub_sas_addr) !=
1094                                  SAS_ADDR(phy->attached_sas_addr)) {
1095
1096                                 SAS_DPRINTK("ex %016llx phy 0x%x "
1097                                             "diverges(%016llx) on subtractive "
1098                                             "boundary(%016llx). Disabled\n",
1099                                             SAS_ADDR(dev->sas_addr), i,
1100                                             SAS_ADDR(phy->attached_sas_addr),
1101                                             SAS_ADDR(sub_sas_addr));
1102                                 sas_ex_disable_phy(dev, i);
1103                         }
1104                 }
1105         }
1106         return 0;
1107 }
1108
1109 static void sas_print_parent_topology_bug(struct domain_device *child,
1110                                                  struct ex_phy *parent_phy,
1111                                                  struct ex_phy *child_phy)
1112 {
1113         static const char ra_char[] = {
1114                 [DIRECT_ROUTING] = 'D',
1115                 [SUBTRACTIVE_ROUTING] = 'S',
1116                 [TABLE_ROUTING] = 'T',
1117         };
1118         static const char *ex_type[] = {
1119                 [EDGE_DEV] = "edge",
1120                 [FANOUT_DEV] = "fanout",
1121         };
1122         struct domain_device *parent = child->parent;
1123
1124         sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
1125                    "has %c:%c routing link!\n",
1126
1127                    ex_type[parent->dev_type],
1128                    SAS_ADDR(parent->sas_addr),
1129                    parent_phy->phy_id,
1130
1131                    ex_type[child->dev_type],
1132                    SAS_ADDR(child->sas_addr),
1133                    child_phy->phy_id,
1134
1135                    ra_char[parent_phy->routing_attr],
1136                    ra_char[child_phy->routing_attr]);
1137 }
1138
1139 static int sas_check_eeds(struct domain_device *child,
1140                                  struct ex_phy *parent_phy,
1141                                  struct ex_phy *child_phy)
1142 {
1143         int res = 0;
1144         struct domain_device *parent = child->parent;
1145
1146         if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
1147                 res = -ENODEV;
1148                 SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
1149                             "phy S:0x%x, while there is a fanout ex %016llx\n",
1150                             SAS_ADDR(parent->sas_addr),
1151                             parent_phy->phy_id,
1152                             SAS_ADDR(child->sas_addr),
1153                             child_phy->phy_id,
1154                             SAS_ADDR(parent->port->disc.fanout_sas_addr));
1155         } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
1156                 memcpy(parent->port->disc.eeds_a, parent->sas_addr,
1157                        SAS_ADDR_SIZE);
1158                 memcpy(parent->port->disc.eeds_b, child->sas_addr,
1159                        SAS_ADDR_SIZE);
1160         } else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
1161                     SAS_ADDR(parent->sas_addr)) ||
1162                    (SAS_ADDR(parent->port->disc.eeds_a) ==
1163                     SAS_ADDR(child->sas_addr)))
1164                    &&
1165                    ((SAS_ADDR(parent->port->disc.eeds_b) ==
1166                      SAS_ADDR(parent->sas_addr)) ||
1167                     (SAS_ADDR(parent->port->disc.eeds_b) ==
1168                      SAS_ADDR(child->sas_addr))))
1169                 ;
1170         else {
1171                 res = -ENODEV;
1172                 SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
1173                             "phy 0x%x link forms a third EEDS!\n",
1174                             SAS_ADDR(parent->sas_addr),
1175                             parent_phy->phy_id,
1176                             SAS_ADDR(child->sas_addr),
1177                             child_phy->phy_id);
1178         }
1179
1180         return res;
1181 }
1182
1183 /* Here we spill over 80 columns.  It is intentional.
1184  */
1185 static int sas_check_parent_topology(struct domain_device *child)
1186 {
1187         struct expander_device *child_ex = &child->ex_dev;
1188         struct expander_device *parent_ex;
1189         int i;
1190         int res = 0;
1191
1192         if (!child->parent)
1193                 return 0;
1194
1195         if (child->parent->dev_type != EDGE_DEV &&
1196             child->parent->dev_type != FANOUT_DEV)
1197                 return 0;
1198
1199         parent_ex = &child->parent->ex_dev;
1200
1201         for (i = 0; i < parent_ex->num_phys; i++) {
1202                 struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
1203                 struct ex_phy *child_phy;
1204
1205                 if (parent_phy->phy_state == PHY_VACANT ||
1206                     parent_phy->phy_state == PHY_NOT_PRESENT)
1207                         continue;
1208
1209                 if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
1210                         continue;
1211
1212                 child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
1213
1214                 switch (child->parent->dev_type) {
1215                 case EDGE_DEV:
1216                         if (child->dev_type == FANOUT_DEV) {
1217                                 if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
1218                                     child_phy->routing_attr != TABLE_ROUTING) {
1219                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1220                                         res = -ENODEV;
1221                                 }
1222                         } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
1223                                 if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
1224                                         res = sas_check_eeds(child, parent_phy, child_phy);
1225                                 } else if (child_phy->routing_attr != TABLE_ROUTING) {
1226                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1227                                         res = -ENODEV;
1228                                 }
1229                         } else if (parent_phy->routing_attr == TABLE_ROUTING &&
1230                                    child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
1231                                 sas_print_parent_topology_bug(child, parent_phy, child_phy);
1232                                 res = -ENODEV;
1233                         }
1234                         break;
1235                 case FANOUT_DEV:
1236                         if (parent_phy->routing_attr != TABLE_ROUTING ||
1237                             child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
1238                                 sas_print_parent_topology_bug(child, parent_phy, child_phy);
1239                                 res = -ENODEV;
1240                         }
1241                         break;
1242                 default:
1243                         break;
1244                 }
1245         }
1246
1247         return res;
1248 }
1249
1250 #define RRI_REQ_SIZE  16
1251 #define RRI_RESP_SIZE 44
1252
1253 static int sas_configure_present(struct domain_device *dev, int phy_id,
1254                                  u8 *sas_addr, int *index, int *present)
1255 {
1256         int i, res = 0;
1257         struct expander_device *ex = &dev->ex_dev;
1258         struct ex_phy *phy = &ex->ex_phy[phy_id];
1259         u8 *rri_req;
1260         u8 *rri_resp;
1261
1262         *present = 0;
1263         *index = 0;
1264
1265         rri_req = alloc_smp_req(RRI_REQ_SIZE);
1266         if (!rri_req)
1267                 return -ENOMEM;
1268
1269         rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
1270         if (!rri_resp) {
1271                 kfree(rri_req);
1272                 return -ENOMEM;
1273         }
1274
1275         rri_req[1] = SMP_REPORT_ROUTE_INFO;
1276         rri_req[9] = phy_id;
1277
1278         for (i = 0; i < ex->max_route_indexes ; i++) {
1279                 *(__be16 *)(rri_req+6) = cpu_to_be16(i);
1280                 res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
1281                                        RRI_RESP_SIZE);
1282                 if (res)
1283                         goto out;
1284                 res = rri_resp[2];
1285                 if (res == SMP_RESP_NO_INDEX) {
1286                         SAS_DPRINTK("overflow of indexes: dev %016llx "
1287                                     "phy 0x%x index 0x%x\n",
1288                                     SAS_ADDR(dev->sas_addr), phy_id, i);
1289                         goto out;
1290                 } else if (res != SMP_RESP_FUNC_ACC) {
1291                         SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
1292                                     "result 0x%x\n", __func__,
1293                                     SAS_ADDR(dev->sas_addr), phy_id, i, res);
1294                         goto out;
1295                 }
1296                 if (SAS_ADDR(sas_addr) != 0) {
1297                         if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
1298                                 *index = i;
1299                                 if ((rri_resp[12] & 0x80) == 0x80)
1300                                         *present = 0;
1301                                 else
1302                                         *present = 1;
1303                                 goto out;
1304                         } else if (SAS_ADDR(rri_resp+16) == 0) {
1305                                 *index = i;
1306                                 *present = 0;
1307                                 goto out;
1308                         }
1309                 } else if (SAS_ADDR(rri_resp+16) == 0 &&
1310                            phy->last_da_index < i) {
1311                         phy->last_da_index = i;
1312                         *index = i;
1313                         *present = 0;
1314                         goto out;
1315                 }
1316         }
1317         res = -1;
1318 out:
1319         kfree(rri_req);
1320         kfree(rri_resp);
1321         return res;
1322 }
1323
1324 #define CRI_REQ_SIZE  44
1325 #define CRI_RESP_SIZE  8
1326
1327 static int sas_configure_set(struct domain_device *dev, int phy_id,
1328                              u8 *sas_addr, int index, int include)
1329 {
1330         int res;
1331         u8 *cri_req;
1332         u8 *cri_resp;
1333
1334         cri_req = alloc_smp_req(CRI_REQ_SIZE);
1335         if (!cri_req)
1336                 return -ENOMEM;
1337
1338         cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
1339         if (!cri_resp) {
1340                 kfree(cri_req);
1341                 return -ENOMEM;
1342         }
1343
1344         cri_req[1] = SMP_CONF_ROUTE_INFO;
1345         *(__be16 *)(cri_req+6) = cpu_to_be16(index);
1346         cri_req[9] = phy_id;
1347         if (SAS_ADDR(sas_addr) == 0 || !include)
1348                 cri_req[12] |= 0x80;
1349         memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
1350
1351         res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
1352                                CRI_RESP_SIZE);
1353         if (res)
1354                 goto out;
1355         res = cri_resp[2];
1356         if (res == SMP_RESP_NO_INDEX) {
1357                 SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
1358                             "index 0x%x\n",
1359                             SAS_ADDR(dev->sas_addr), phy_id, index);
1360         }
1361 out:
1362         kfree(cri_req);
1363         kfree(cri_resp);
1364         return res;
1365 }
1366
1367 static int sas_configure_phy(struct domain_device *dev, int phy_id,
1368                                     u8 *sas_addr, int include)
1369 {
1370         int index;
1371         int present;
1372         int res;
1373
1374         res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
1375         if (res)
1376                 return res;
1377         if (include ^ present)
1378                 return sas_configure_set(dev, phy_id, sas_addr, index,include);
1379
1380         return res;
1381 }
1382
1383 /**
1384  * sas_configure_parent -- configure routing table of parent
1385  * parent: parent expander
1386  * child: child expander
1387  * sas_addr: SAS port identifier of device directly attached to child
1388  */
1389 static int sas_configure_parent(struct domain_device *parent,
1390                                 struct domain_device *child,
1391                                 u8 *sas_addr, int include)
1392 {
1393         struct expander_device *ex_parent = &parent->ex_dev;
1394         int res = 0;
1395         int i;
1396
1397         if (parent->parent) {
1398                 res = sas_configure_parent(parent->parent, parent, sas_addr,
1399                                            include);
1400                 if (res)
1401                         return res;
1402         }
1403
1404         if (ex_parent->conf_route_table == 0) {
1405                 SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
1406                             SAS_ADDR(parent->sas_addr));
1407                 return 0;
1408         }
1409
1410         for (i = 0; i < ex_parent->num_phys; i++) {
1411                 struct ex_phy *phy = &ex_parent->ex_phy[i];
1412
1413                 if ((phy->routing_attr == TABLE_ROUTING) &&
1414                     (SAS_ADDR(phy->attached_sas_addr) ==
1415                      SAS_ADDR(child->sas_addr))) {
1416                         res = sas_configure_phy(parent, i, sas_addr, include);
1417                         if (res)
1418                                 return res;
1419                 }
1420         }
1421
1422         return res;
1423 }
1424
1425 /**
1426  * sas_configure_routing -- configure routing
1427  * dev: expander device
1428  * sas_addr: port identifier of device directly attached to the expander device
1429  */
1430 static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
1431 {
1432         if (dev->parent)
1433                 return sas_configure_parent(dev->parent, dev, sas_addr, 1);
1434         return 0;
1435 }
1436
1437 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr)
1438 {
1439         if (dev->parent)
1440                 return sas_configure_parent(dev->parent, dev, sas_addr, 0);
1441         return 0;
1442 }
1443
1444 /**
1445  * sas_discover_expander -- expander discovery
1446  * @ex: pointer to expander domain device
1447  *
1448  * See comment in sas_discover_sata().
1449  */
1450 static int sas_discover_expander(struct domain_device *dev)
1451 {
1452         int res;
1453
1454         res = sas_notify_lldd_dev_found(dev);
1455         if (res)
1456                 return res;
1457
1458         res = sas_ex_general(dev);
1459         if (res)
1460                 goto out_err;
1461         res = sas_ex_manuf_info(dev);
1462         if (res)
1463                 goto out_err;
1464
1465         res = sas_expander_discover(dev);
1466         if (res) {
1467                 SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
1468                             SAS_ADDR(dev->sas_addr), res);
1469                 goto out_err;
1470         }
1471
1472         sas_check_ex_subtractive_boundary(dev);
1473         res = sas_check_parent_topology(dev);
1474         if (res)
1475                 goto out_err;
1476         return 0;
1477 out_err:
1478         sas_notify_lldd_dev_gone(dev);
1479         return res;
1480 }
1481
1482 static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
1483 {
1484         int res = 0;
1485         struct domain_device *dev;
1486
1487         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
1488                 if (dev->dev_type == EDGE_DEV ||
1489                     dev->dev_type == FANOUT_DEV) {
1490                         struct sas_expander_device *ex =
1491                                 rphy_to_expander_device(dev->rphy);
1492
1493                         if (level == ex->level)
1494                                 res = sas_ex_discover_devices(dev, -1);
1495                         else if (level > 0)
1496                                 res = sas_ex_discover_devices(port->port_dev, -1);
1497
1498                 }
1499         }
1500
1501         return res;
1502 }
1503
1504 static int sas_ex_bfs_disc(struct asd_sas_port *port)
1505 {
1506         int res;
1507         int level;
1508
1509         do {
1510                 level = port->disc.max_level;
1511                 res = sas_ex_level_discovery(port, level);
1512                 mb();
1513         } while (level < port->disc.max_level);
1514
1515         return res;
1516 }
1517
1518 int sas_discover_root_expander(struct domain_device *dev)
1519 {
1520         int res;
1521         struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
1522
1523         res = sas_rphy_add(dev->rphy);
1524         if (res)
1525                 goto out_err;
1526
1527         ex->level = dev->port->disc.max_level; /* 0 */
1528         res = sas_discover_expander(dev);
1529         if (res)
1530                 goto out_err2;
1531
1532         sas_ex_bfs_disc(dev->port);
1533
1534         return res;
1535
1536 out_err2:
1537         sas_rphy_remove(dev->rphy);
1538 out_err:
1539         return res;
1540 }
1541
1542 /* ---------- Domain revalidation ---------- */
1543
1544 static int sas_get_phy_discover(struct domain_device *dev,
1545                                 int phy_id, struct smp_resp *disc_resp)
1546 {
1547         int res;
1548         u8 *disc_req;
1549
1550         disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
1551         if (!disc_req)
1552                 return -ENOMEM;
1553
1554         disc_req[1] = SMP_DISCOVER;
1555         disc_req[9] = phy_id;
1556
1557         res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
1558                                disc_resp, DISCOVER_RESP_SIZE);
1559         if (res)
1560                 goto out;
1561         else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
1562                 res = disc_resp->result;
1563                 goto out;
1564         }
1565 out:
1566         kfree(disc_req);
1567         return res;
1568 }
1569
1570 static int sas_get_phy_change_count(struct domain_device *dev,
1571                                     int phy_id, int *pcc)
1572 {
1573         int res;
1574         struct smp_resp *disc_resp;
1575
1576         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
1577         if (!disc_resp)
1578                 return -ENOMEM;
1579
1580         res = sas_get_phy_discover(dev, phy_id, disc_resp);
1581         if (!res)
1582                 *pcc = disc_resp->disc.change_count;
1583
1584         kfree(disc_resp);
1585         return res;
1586 }
1587
1588 static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
1589                                          int phy_id, u8 *attached_sas_addr)
1590 {
1591         int res;
1592         struct smp_resp *disc_resp;
1593         struct discover_resp *dr;
1594
1595         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
1596         if (!disc_resp)
1597                 return -ENOMEM;
1598         dr = &disc_resp->disc;
1599
1600         res = sas_get_phy_discover(dev, phy_id, disc_resp);
1601         if (!res) {
1602                 memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
1603                 if (dr->attached_dev_type == 0)
1604                         memset(attached_sas_addr, 0, 8);
1605         }
1606         kfree(disc_resp);
1607         return res;
1608 }
1609
1610 static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
1611                               int from_phy, bool update)
1612 {
1613         struct expander_device *ex = &dev->ex_dev;
1614         int res = 0;
1615         int i;
1616
1617         for (i = from_phy; i < ex->num_phys; i++) {
1618                 int phy_change_count = 0;
1619
1620                 res = sas_get_phy_change_count(dev, i, &phy_change_count);
1621                 if (res)
1622                         goto out;
1623                 else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
1624                         if (update)
1625                                 ex->ex_phy[i].phy_change_count =
1626                                         phy_change_count;
1627                         *phy_id = i;
1628                         return 0;
1629                 }
1630         }
1631 out:
1632         return res;
1633 }
1634
1635 static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
1636 {
1637         int res;
1638         u8  *rg_req;
1639         struct smp_resp  *rg_resp;
1640
1641         rg_req = alloc_smp_req(RG_REQ_SIZE);
1642         if (!rg_req)
1643                 return -ENOMEM;
1644
1645         rg_resp = alloc_smp_resp(RG_RESP_SIZE);
1646         if (!rg_resp) {
1647                 kfree(rg_req);
1648                 return -ENOMEM;
1649         }
1650
1651         rg_req[1] = SMP_REPORT_GENERAL;
1652
1653         res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
1654                                RG_RESP_SIZE);
1655         if (res)
1656                 goto out;
1657         if (rg_resp->result != SMP_RESP_FUNC_ACC) {
1658                 res = rg_resp->result;
1659                 goto out;
1660         }
1661
1662         *ecc = be16_to_cpu(rg_resp->rg.change_count);
1663 out:
1664         kfree(rg_resp);
1665         kfree(rg_req);
1666         return res;
1667 }
1668 /**
1669  * sas_find_bcast_dev -  find the device issue BROADCAST(CHANGE).
1670  * @dev:domain device to be detect.
1671  * @src_dev: the device which originated BROADCAST(CHANGE).
1672  *
1673  * Add self-configuration expander suport. Suppose two expander cascading,
1674  * when the first level expander is self-configuring, hotplug the disks in
1675  * second level expander, BROADCAST(CHANGE) will not only be originated
1676  * in the second level expander, but also be originated in the first level
1677  * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
1678  * expander changed count in two level expanders will all increment at least
1679  * once, but the phy which chang count has changed is the source device which
1680  * we concerned.
1681  */
1682
1683 static int sas_find_bcast_dev(struct domain_device *dev,
1684                               struct domain_device **src_dev)
1685 {
1686         struct expander_device *ex = &dev->ex_dev;
1687         int ex_change_count = -1;
1688         int phy_id = -1;
1689         int res;
1690         struct domain_device *ch;
1691
1692         res = sas_get_ex_change_count(dev, &ex_change_count);
1693         if (res)
1694                 goto out;
1695         if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
1696                 /* Just detect if this expander phys phy change count changed,
1697                 * in order to determine if this expander originate BROADCAST,
1698                 * and do not update phy change count field in our structure.
1699                 */
1700                 res = sas_find_bcast_phy(dev, &phy_id, 0, false);
1701                 if (phy_id != -1) {
1702                         *src_dev = dev;
1703                         ex->ex_change_count = ex_change_count;
1704                         SAS_DPRINTK("Expander phy change count has changed\n");
1705                         return res;
1706                 } else
1707                         SAS_DPRINTK("Expander phys DID NOT change\n");
1708         }
1709         list_for_each_entry(ch, &ex->children, siblings) {
1710                 if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
1711                         res = sas_find_bcast_dev(ch, src_dev);
1712                         if (src_dev)
1713                                 return res;
1714                 }
1715         }
1716 out:
1717         return res;
1718 }
1719
1720 static void sas_unregister_ex_tree(struct domain_device *dev)
1721 {
1722         struct expander_device *ex = &dev->ex_dev;
1723         struct domain_device *child, *n;
1724
1725         list_for_each_entry_safe(child, n, &ex->children, siblings) {
1726                 if (child->dev_type == EDGE_DEV ||
1727                     child->dev_type == FANOUT_DEV)
1728                         sas_unregister_ex_tree(child);
1729                 else
1730                         sas_unregister_dev(child);
1731         }
1732         sas_unregister_dev(dev);
1733 }
1734
1735 static void sas_unregister_devs_sas_addr(struct domain_device *parent,
1736                                          int phy_id, bool last)
1737 {
1738         struct expander_device *ex_dev = &parent->ex_dev;
1739         struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
1740         struct domain_device *child, *n;
1741         if (last) {
1742                 list_for_each_entry_safe(child, n,
1743                         &ex_dev->children, siblings) {
1744                         if (SAS_ADDR(child->sas_addr) ==
1745                             SAS_ADDR(phy->attached_sas_addr)) {
1746                                 if (child->dev_type == EDGE_DEV ||
1747                                     child->dev_type == FANOUT_DEV)
1748                                         sas_unregister_ex_tree(child);
1749                                 else
1750                                         sas_unregister_dev(child);
1751                                 break;
1752                         }
1753                 }
1754                 sas_disable_routing(parent, phy->attached_sas_addr);
1755         }
1756         memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
1757         sas_port_delete_phy(phy->port, phy->phy);
1758         if (phy->port->num_phys == 0)
1759                 sas_port_delete(phy->port);
1760         phy->port = NULL;
1761 }
1762
1763 static int sas_discover_bfs_by_root_level(struct domain_device *root,
1764                                           const int level)
1765 {
1766         struct expander_device *ex_root = &root->ex_dev;
1767         struct domain_device *child;
1768         int res = 0;
1769
1770         list_for_each_entry(child, &ex_root->children, siblings) {
1771                 if (child->dev_type == EDGE_DEV ||
1772                     child->dev_type == FANOUT_DEV) {
1773                         struct sas_expander_device *ex =
1774                                 rphy_to_expander_device(child->rphy);
1775
1776                         if (level > ex->level)
1777                                 res = sas_discover_bfs_by_root_level(child,
1778                                                                      level);
1779                         else if (level == ex->level)
1780                                 res = sas_ex_discover_devices(child, -1);
1781                 }
1782         }
1783         return res;
1784 }
1785
1786 static int sas_discover_bfs_by_root(struct domain_device *dev)
1787 {
1788         int res;
1789         struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
1790         int level = ex->level+1;
1791
1792         res = sas_ex_discover_devices(dev, -1);
1793         if (res)
1794                 goto out;
1795         do {
1796                 res = sas_discover_bfs_by_root_level(dev, level);
1797                 mb();
1798                 level += 1;
1799         } while (level <= dev->port->disc.max_level);
1800 out:
1801         return res;
1802 }
1803
1804 static int sas_discover_new(struct domain_device *dev, int phy_id)
1805 {
1806         struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
1807         struct domain_device *child;
1808         bool found = false;
1809         int res, i;
1810
1811         SAS_DPRINTK("ex %016llx phy%d new device attached\n",
1812                     SAS_ADDR(dev->sas_addr), phy_id);
1813         res = sas_ex_phy_discover(dev, phy_id);
1814         if (res)
1815                 goto out;
1816         /* to support the wide port inserted */
1817         for (i = 0; i < dev->ex_dev.num_phys; i++) {
1818                 struct ex_phy *ex_phy_temp = &dev->ex_dev.ex_phy[i];
1819                 if (i == phy_id)
1820                         continue;
1821                 if (SAS_ADDR(ex_phy_temp->attached_sas_addr) ==
1822                     SAS_ADDR(ex_phy->attached_sas_addr)) {
1823                         found = true;
1824                         break;
1825                 }
1826         }
1827         if (found) {
1828                 sas_ex_join_wide_port(dev, phy_id);
1829                 return 0;
1830         }
1831         res = sas_ex_discover_devices(dev, phy_id);
1832         if (!res)
1833                 goto out;
1834         list_for_each_entry(child, &dev->ex_dev.children, siblings) {
1835                 if (SAS_ADDR(child->sas_addr) ==
1836                     SAS_ADDR(ex_phy->attached_sas_addr)) {
1837                         if (child->dev_type == EDGE_DEV ||
1838                             child->dev_type == FANOUT_DEV)
1839                                 res = sas_discover_bfs_by_root(child);
1840                         break;
1841                 }
1842         }
1843 out:
1844         return res;
1845 }
1846
1847 static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
1848 {
1849         struct expander_device *ex = &dev->ex_dev;
1850         struct ex_phy *phy = &ex->ex_phy[phy_id];
1851         u8 attached_sas_addr[8];
1852         int res;
1853
1854         res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
1855         switch (res) {
1856         case SMP_RESP_NO_PHY:
1857                 phy->phy_state = PHY_NOT_PRESENT;
1858                 sas_unregister_devs_sas_addr(dev, phy_id, last);
1859                 goto out; break;
1860         case SMP_RESP_PHY_VACANT:
1861                 phy->phy_state = PHY_VACANT;
1862                 sas_unregister_devs_sas_addr(dev, phy_id, last);
1863                 goto out; break;
1864         case SMP_RESP_FUNC_ACC:
1865                 break;
1866         }
1867
1868         if (SAS_ADDR(attached_sas_addr) == 0) {
1869                 phy->phy_state = PHY_EMPTY;
1870                 sas_unregister_devs_sas_addr(dev, phy_id, last);
1871         } else if (SAS_ADDR(attached_sas_addr) ==
1872                    SAS_ADDR(phy->attached_sas_addr)) {
1873                 SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
1874                             SAS_ADDR(dev->sas_addr), phy_id);
1875                 sas_ex_phy_discover(dev, phy_id);
1876         } else
1877                 res = sas_discover_new(dev, phy_id);
1878 out:
1879         return res;
1880 }
1881
1882 /**
1883  * sas_rediscover - revalidate the domain.
1884  * @dev:domain device to be detect.
1885  * @phy_id: the phy id will be detected.
1886  *
1887  * NOTE: this process _must_ quit (return) as soon as any connection
1888  * errors are encountered.  Connection recovery is done elsewhere.
1889  * Discover process only interrogates devices in order to discover the
1890  * domain.For plugging out, we un-register the device only when it is
1891  * the last phy in the port, for other phys in this port, we just delete it
1892  * from the port.For inserting, we do discovery when it is the
1893  * first phy,for other phys in this port, we add it to the port to
1894  * forming the wide-port.
1895  */
1896 static int sas_rediscover(struct domain_device *dev, const int phy_id)
1897 {
1898         struct expander_device *ex = &dev->ex_dev;
1899         struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
1900         int res = 0;
1901         int i;
1902         bool last = true;       /* is this the last phy of the port */
1903
1904         SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
1905                     SAS_ADDR(dev->sas_addr), phy_id);
1906
1907         if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
1908                 for (i = 0; i < ex->num_phys; i++) {
1909                         struct ex_phy *phy = &ex->ex_phy[i];
1910
1911                         if (i == phy_id)
1912                                 continue;
1913                         if (SAS_ADDR(phy->attached_sas_addr) ==
1914                             SAS_ADDR(changed_phy->attached_sas_addr)) {
1915                                 SAS_DPRINTK("phy%d part of wide port with "
1916                                             "phy%d\n", phy_id, i);
1917                                 last = false;
1918                                 break;
1919                         }
1920                 }
1921                 res = sas_rediscover_dev(dev, phy_id, last);
1922         } else
1923                 res = sas_discover_new(dev, phy_id);
1924         return res;
1925 }
1926
1927 /**
1928  * sas_revalidate_domain -- revalidate the domain
1929  * @port: port to the domain of interest
1930  *
1931  * NOTE: this process _must_ quit (return) as soon as any connection
1932  * errors are encountered.  Connection recovery is done elsewhere.
1933  * Discover process only interrogates devices in order to discover the
1934  * domain.
1935  */
1936 int sas_ex_revalidate_domain(struct domain_device *port_dev)
1937 {
1938         int res;
1939         struct domain_device *dev = NULL;
1940
1941         res = sas_find_bcast_dev(port_dev, &dev);
1942         if (res)
1943                 goto out;
1944         if (dev) {
1945                 struct expander_device *ex = &dev->ex_dev;
1946                 int i = 0, phy_id;
1947
1948                 do {
1949                         phy_id = -1;
1950                         res = sas_find_bcast_phy(dev, &phy_id, i, true);
1951                         if (phy_id == -1)
1952                                 break;
1953                         res = sas_rediscover(dev, phy_id);
1954                         i = phy_id + 1;
1955                 } while (i < ex->num_phys);
1956         }
1957 out:
1958         return res;
1959 }
1960
1961 int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
1962                     struct request *req)
1963 {
1964         struct domain_device *dev;
1965         int ret, type;
1966         struct request *rsp = req->next_rq;
1967
1968         if (!rsp) {
1969                 printk("%s: space for a smp response is missing\n",
1970                        __func__);
1971                 return -EINVAL;
1972         }
1973
1974         /* no rphy means no smp target support (ie aic94xx host) */
1975         if (!rphy)
1976                 return sas_smp_host_handler(shost, req, rsp);
1977
1978         type = rphy->identify.device_type;
1979
1980         if (type != SAS_EDGE_EXPANDER_DEVICE &&
1981             type != SAS_FANOUT_EXPANDER_DEVICE) {
1982                 printk("%s: can we send a smp request to a device?\n",
1983                        __func__);
1984                 return -EINVAL;
1985         }
1986
1987         dev = sas_find_dev_by_rphy(rphy);
1988         if (!dev) {
1989                 printk("%s: fail to find a domain_device?\n", __func__);
1990                 return -EINVAL;
1991         }
1992
1993         /* do we need to support multiple segments? */
1994         if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
1995                 printk("%s: multiple segments req %u %u, rsp %u %u\n",
1996                        __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
1997                        rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
1998                 return -EINVAL;
1999         }
2000
2001         ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req),
2002                                bio_data(rsp->bio), blk_rq_bytes(rsp));
2003         if (ret > 0) {
2004                 /* positive number is the untransferred residual */
2005                 rsp->resid_len = ret;
2006                 req->resid_len = 0;
2007                 ret = 0;
2008         } else if (ret == 0) {
2009                 rsp->resid_len = 0;
2010                 req->resid_len = 0;
2011         }
2012
2013         return ret;
2014 }