drivers/net/wireless/iwlwifi/iwl-agn.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
   4  *
   5  * Portions of this file are derived from the ipw3945 project, as well
   6  * as portions of the ieee80211 subsystem header files.
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of version 2 of the GNU General Public License as
  10  * published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but WITHOUT
  13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  15  * more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along with
  18  * this program; if not, write to the Free Software Foundation, Inc.,
  19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  20  *
  21  * The full GNU General Public License is included in this distribution in the
  22  * file called LICENSE.
  23  *
  24  * Contact Information:
  25  *  Intel Linux Wireless <ilw@linux.intel.com>
  26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27  *
  28  *****************************************************************************/
  29
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/init.h>
  33 #include <linux/pci.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/delay.h>
  36 #include <linux/sched.h>
  37 #include <linux/skbuff.h>
  38 #include <linux/netdevice.h>
  39 #include <linux/wireless.h>
  40 #include <linux/firmware.h>
  41 #include <linux/etherdevice.h>
  42 #include <linux/if_arp.h>
  43
  44 #include <net/mac80211.h>
  45
  46 #include <asm/div64.h>
  47
  48 #define DRV_NAME        "iwlagn"
  49
  50 #include "iwl-eeprom.h"
  51 #include "iwl-dev.h"
  52 #include "iwl-core.h"
  53 #include "iwl-io.h"
  54 #include "iwl-helpers.h"
  55 #include "iwl-sta.h"
  56 #include "iwl-calib.h"
  57 #include "iwl-agn.h"
  58
  59
  60 /******************************************************************************
  61  *
  62  * module boiler plate
  63  *
  64  ******************************************************************************/
  65
  66 /*
  67  * module name, copyright, version, etc.
  68  */
  69 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
  70
  71 #ifdef CONFIG_IWLWIFI_DEBUG
  72 #define VD "d"
  73 #else
  74 #define VD
  75 #endif
  76
  77 #define DRV_VERSION     IWLWIFI_VERSION VD
  78
  79
  80 MODULE_DESCRIPTION(DRV_DESCRIPTION);
  81 MODULE_VERSION(DRV_VERSION);
  82 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
  83 MODULE_LICENSE("GPL");
  84 MODULE_ALIAS("iwl4965");
  85
  86 /*************** STATION TABLE MANAGEMENT ****
  87  * mac80211 should be examined to determine if sta_info is duplicating
  88  * the functionality provided here
  89  */
  90
  91 /**************************************************************/
  92
  93 /**
  94  * iwl_commit_rxon - commit staging_rxon to hardware
  95  *
  96  * The RXON command in staging_rxon is committed to the hardware and
  97  * the active_rxon structure is updated with the new data.  This
  98  * function correctly transitions out of the RXON_ASSOC_MSK state if
  99  * a HW tune is required based on the RXON structure changes.
 100  */
 101 int iwl_commit_rxon(struct iwl_priv *priv)
 102 {
 103         /* cast away the const for active_rxon in this function */
 104         struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
 105         int ret;
 106         bool new_assoc =
 107                 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
 108
 109         if (!iwl_is_alive(priv))
 110                 return -EBUSY;
 111
 112         /* always get timestamp with Rx frame */
 113         priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
 114
 115         ret = iwl_check_rxon_cmd(priv);
 116         if (ret) {
 117                 IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
 118                 return -EINVAL;
 119         }
 120
 121         /*
 122          * receive commit_rxon request
 123          * abort any previous channel switch if still in process
 124          */
 125         if (priv->switch_rxon.switch_in_progress &&
 126             (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
 127                 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
 128                       le16_to_cpu(priv->switch_rxon.channel));
 129                 priv->switch_rxon.switch_in_progress = false;
 130         }
 131
 132         /* If we don't need to send a full RXON, we can use
 133          * iwl_rxon_assoc_cmd which is used to reconfigure filter
 134          * and other flags for the current radio configuration. */
 135         if (!iwl_full_rxon_required(priv)) {
 136                 ret = iwl_send_rxon_assoc(priv);
 137                 if (ret) {
 138                         IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
 139                         return ret;
 140                 }
 141
 142                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 143                 iwl_print_rx_config_cmd(priv);
 144                 return 0;
 145         }
 146
 147         /* station table will be cleared */
 148         priv->assoc_station_added = 0;
 149
 150         /* If we are currently associated and the new config requires
 151          * an RXON_ASSOC and the new config wants the associated mask enabled,
 152          * we must clear the associated from the active configuration
 153          * before we apply the new config */
 154         if (iwl_is_associated(priv) && new_assoc) {
 155                 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
 156                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 157
 158                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
 159                                       sizeof(struct iwl_rxon_cmd),
 160                                       &priv->active_rxon);
 161
 162                 /* If the mask clearing failed then we set
 163                  * active_rxon back to what it was previously */
 164                 if (ret) {
 165                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
 166                         IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
 167                         return ret;
 168                 }
 169         }
 170
 171         IWL_DEBUG_INFO(priv, "Sending RXON\n"
 172                        "* with%s RXON_FILTER_ASSOC_MSK\n"
 173                        "* channel = %d\n"
 174                        "* bssid = %pM\n",
 175                        (new_assoc ? "" : "out"),
 176                        le16_to_cpu(priv->staging_rxon.channel),
 177                        priv->staging_rxon.bssid_addr);
 178
 179         iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
 180
 181         /* Apply the new configuration
 182          * RXON unassoc clears the station table in uCode, send it before
 183          * we add the bcast station. If assoc bit is set, we will send RXON
 184          * after having added the bcast and bssid station.
 185          */
 186         if (!new_assoc) {
 187                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
 188                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
 189                 if (ret) {
 190                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
 191                         return ret;
 192                 }
 193                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 194         }
 195
 196         iwl_clear_stations_table(priv);
 197
 198         priv->start_calib = 0;
 199
 200         /* Add the broadcast address so we can send broadcast frames */
 201         priv->cfg->ops->lib->add_bcast_station(priv);
 202
 203
 204         /* If we have set the ASSOC_MSK and we are in BSS mode then
 205          * add the IWL_AP_ID to the station rate table */
 206         if (new_assoc) {
 207                 if (priv->iw_mode == NL80211_IFTYPE_STATION) {
 208                         ret = iwl_rxon_add_station(priv,
 209                                            priv->active_rxon.bssid_addr, 1);
 210                         if (ret == IWL_INVALID_STATION) {
 211                                 IWL_ERR(priv,
 212                                         "Error adding AP address for TX.\n");
 213                                 return -EIO;
 214                         }
 215                         priv->assoc_station_added = 1;
 216                         if (priv->default_wep_key &&
 217                             iwl_send_static_wepkey_cmd(priv, 0))
 218                                 IWL_ERR(priv,
 219                                         "Could not send WEP static key.\n");
 220                 }
 221
 222                 /*
 223                  * allow CTS-to-self if possible for new association.
 224                  * this is relevant only for 5000 series and up,
 225                  * but will not damage 4965
 226                  */
 227                 priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
 228
 229                 /* Apply the new configuration
 230                  * RXON assoc doesn't clear the station table in uCode,
 231                  */
 232                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
 233                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
 234                 if (ret) {
 235                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
 236                         return ret;
 237                 }
 238                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 239         }
 240         iwl_print_rx_config_cmd(priv);
 241
 242         iwl_init_sensitivity(priv);
 243
 244         /* If we issue a new RXON command which required a tune then we must
 245          * send a new TXPOWER command or we won't be able to Tx any frames */
 246         ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
 247         if (ret) {
 248                 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
 249                 return ret;
 250         }
 251
 252         return 0;
 253 }
 254
 255 void iwl_update_chain_flags(struct iwl_priv *priv)
 256 {
 257
 258         if (priv->cfg->ops->hcmd->set_rxon_chain)
 259                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
 260         iwlcore_commit_rxon(priv);
 261 }
 262
 263 static void iwl_clear_free_frames(struct iwl_priv *priv)
 264 {
 265         struct list_head *element;
 266
 267         IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
 268                        priv->frames_count);
 269
 270         while (!list_empty(&priv->free_frames)) {
 271                 element = priv->free_frames.next;
 272                 list_del(element);
 273                 kfree(list_entry(element, struct iwl_frame, list));
 274                 priv->frames_count--;
 275         }
 276
 277         if (priv->frames_count) {
 278                 IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
 279                             priv->frames_count);
 280                 priv->frames_count = 0;
 281         }
 282 }
 283
 284 static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
 285 {
 286         struct iwl_frame *frame;
 287         struct list_head *element;
 288         if (list_empty(&priv->free_frames)) {
 289                 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
 290                 if (!frame) {
 291                         IWL_ERR(priv, "Could not allocate frame!\n");
 292                         return NULL;
 293                 }
 294
 295                 priv->frames_count++;
 296                 return frame;
 297         }
 298
 299         element = priv->free_frames.next;
 300         list_del(element);
 301         return list_entry(element, struct iwl_frame, list);
 302 }
 303
 304 static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
 305 {
 306         memset(frame, 0, sizeof(*frame));
 307         list_add(&frame->list, &priv->free_frames);
 308 }
 309
 310 static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
 311                                           struct ieee80211_hdr *hdr,
 312                                           int left)
 313 {
 314         if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
 315             ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
 316              (priv->iw_mode != NL80211_IFTYPE_AP)))
 317                 return 0;
 318
 319         if (priv->ibss_beacon->len > left)
 320                 return 0;
 321
 322         memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
 323
 324         return priv->ibss_beacon->len;
 325 }
 326
 327 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
 328 static void iwl_set_beacon_tim(struct iwl_priv *priv,
 329                 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
 330                 u8 *beacon, u32 frame_size)
 331 {
 332         u16 tim_idx;
 333         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
 334
 335         /*
 336          * The index is relative to frame start but we start looking at the
 337          * variable-length part of the beacon.
 338          */
 339         tim_idx = mgmt->u.beacon.variable - beacon;
 340
 341         /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
 342         while ((tim_idx < (frame_size - 2)) &&
 343                         (beacon[tim_idx] != WLAN_EID_TIM))
 344                 tim_idx += beacon[tim_idx+1] + 2;
 345
 346         /* If TIM field was found, set variables */
 347         if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
 348                 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
 349                 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
 350         } else
 351                 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
 352 }
 353
 354 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 355                                        struct iwl_frame *frame)
 356 {
 357         struct iwl_tx_beacon_cmd *tx_beacon_cmd;
 358         u32 frame_size;
 359         u32 rate_flags;
 360         u32 rate;
 361         /*
 362          * We have to set up the TX command, the TX Beacon command, and the
 363          * beacon contents.
 364          */
 365
 366         /* Initialize memory */
 367         tx_beacon_cmd = &frame->u.beacon;
 368         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
 369
 370         /* Set up TX beacon contents */
 371         frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
 372                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
 373         if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
 374                 return 0;
 375
 376         /* Set up TX command fields */
 377         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
 378         tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
 379         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 380         tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
 381                 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
 382
 383         /* Set up TX beacon command fields */
 384         iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
 385                         frame_size);
 386
 387         /* Set up packet rate and flags */
 388         rate = iwl_rate_get_lowest_plcp(priv);
 389         priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
 390         rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
 391         if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
 392                 rate_flags |= RATE_MCS_CCK_MSK;
 393         tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
 394                         rate_flags);
 395
 396         return sizeof(*tx_beacon_cmd) + frame_size;
 397 }
 398 static int iwl_send_beacon_cmd(struct iwl_priv *priv)
 399 {
 400         struct iwl_frame *frame;
 401         unsigned int frame_size;
 402         int rc;
 403
 404         frame = iwl_get_free_frame(priv);
 405         if (!frame) {
 406                 IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
 407                           "command.\n");
 408                 return -ENOMEM;
 409         }
 410
 411         frame_size = iwl_hw_get_beacon_cmd(priv, frame);
 412         if (!frame_size) {
 413                 IWL_ERR(priv, "Error configuring the beacon command\n");
 414                 iwl_free_frame(priv, frame);
 415                 return -EINVAL;
 416         }
 417
 418         rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
 419                               &frame->u.cmd[0]);
 420
 421         iwl_free_frame(priv, frame);
 422
 423         return rc;
 424 }
 425
 426 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
 427 {
 428         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
 429
 430         dma_addr_t addr = get_unaligned_le32(&tb->lo);
 431         if (sizeof(dma_addr_t) > sizeof(u32))
 432                 addr |=
 433                 ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
 434
 435         return addr;
 436 }
 437
 438 static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
 439 {
 440         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
 441
 442         return le16_to_cpu(tb->hi_n_len) >> 4;
 443 }
 444
 445 static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
 446                                   dma_addr_t addr, u16 len)
 447 {
 448         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
 449         u16 hi_n_len = len << 4;
 450
 451         put_unaligned_le32(addr, &tb->lo);
 452         if (sizeof(dma_addr_t) > sizeof(u32))
 453                 hi_n_len |= ((addr >> 16) >> 16) & 0xF;
 454
 455         tb->hi_n_len = cpu_to_le16(hi_n_len);
 456
 457         tfd->num_tbs = idx + 1;
 458 }
 459
 460 static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
 461 {
 462         return tfd->num_tbs & 0x1f;
 463 }
 464
 465 /**
 466  * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
 467  * @priv - driver private data
 468  * @txq - tx queue
 469  *
 470  * Does NOT advance any TFD circular buffer read/write indexes
 471  * Does NOT free the TFD itself (which is within circular buffer)
 472  */
 473 void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 474 {
 475         struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
 476         struct iwl_tfd *tfd;
 477         struct pci_dev *dev = priv->pci_dev;
 478         int index = txq->q.read_ptr;
 479         int i;
 480         int num_tbs;
 481
 482         tfd = &tfd_tmp[index];
 483
 484         /* Sanity check on number of chunks */
 485         num_tbs = iwl_tfd_get_num_tbs(tfd);
 486
 487         if (num_tbs >= IWL_NUM_OF_TBS) {
 488                 IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
 489                 /* @todo issue fatal error, it is quite serious situation */
 490                 return;
 491         }
 492
 493         /* Unmap tx_cmd */
 494         if (num_tbs)
 495                 pci_unmap_single(dev,
 496                                 pci_unmap_addr(&txq->meta[index], mapping),
 497                                 pci_unmap_len(&txq->meta[index], len),
 498                                 PCI_DMA_BIDIRECTIONAL);
 499
 500         /* Unmap chunks, if any. */
 501         for (i = 1; i < num_tbs; i++) {
 502                 pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
 503                                 iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
 504
 505                 if (txq->txb) {
 506                         dev_kfree_skb(txq->txb[txq->q.read_ptr].skb[i - 1]);
 507                         txq->txb[txq->q.read_ptr].skb[i - 1] = NULL;
 508                 }
 509         }
 510 }
 511
 512 int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
 513                                  struct iwl_tx_queue *txq,
 514                                  dma_addr_t addr, u16 len,
 515                                  u8 reset, u8 pad)
 516 {
 517         struct iwl_queue *q;
 518         struct iwl_tfd *tfd, *tfd_tmp;
 519         u32 num_tbs;
 520
 521         q = &txq->q;
 522         tfd_tmp = (struct iwl_tfd *)txq->tfds;
 523         tfd = &tfd_tmp[q->write_ptr];
 524
 525         if (reset)
 526                 memset(tfd, 0, sizeof(*tfd));
 527
 528         num_tbs = iwl_tfd_get_num_tbs(tfd);
 529
 530         /* Each TFD can point to a maximum 20 Tx buffers */
 531         if (num_tbs >= IWL_NUM_OF_TBS) {
 532                 IWL_ERR(priv, "Error can not send more than %d chunks\n",
 533                           IWL_NUM_OF_TBS);
 534                 return -EINVAL;
 535         }
 536
 537         BUG_ON(addr & ~DMA_BIT_MASK(36));
 538         if (unlikely(addr & ~IWL_TX_DMA_MASK))
 539                 IWL_ERR(priv, "Unaligned address = %llx\n",
 540                           (unsigned long long)addr);
 541
 542         iwl_tfd_set_tb(tfd, num_tbs, addr, len);
 543
 544         return 0;
 545 }
 546
 547 /*
 548  * Tell nic where to find circular buffer of Tx Frame Descriptors for
 549  * given Tx queue, and enable the DMA channel used for that queue.
 550  *
 551  * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
 552  * channels supported in hardware.
 553  */
 554 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 555                          struct iwl_tx_queue *txq)
 556 {
 557         int txq_id = txq->q.id;
 558
 559         /* Circular buffer (TFD queue in DRAM) physical base address */
 560         iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
 561                              txq->q.dma_addr >> 8);
 562
 563         return 0;
 564 }
 565
 566 /******************************************************************************
 567  *
 568  * Generic RX handler implementations
 569  *
 570  ******************************************************************************/
 571 static void iwl_rx_reply_alive(struct iwl_priv *priv,
 572                                 struct iwl_rx_mem_buffer *rxb)
 573 {
 574         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 575         struct iwl_alive_resp *palive;
 576         struct delayed_work *pwork;
 577
 578         palive = &pkt->u.alive_frame;
 579
 580         IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
 581                        "0x%01X 0x%01X\n",
 582                        palive->is_valid, palive->ver_type,
 583                        palive->ver_subtype);
 584
 585         if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
 586                 IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
 587                 memcpy(&priv->card_alive_init,
 588                        &pkt->u.alive_frame,
 589                        sizeof(struct iwl_init_alive_resp));
 590                 pwork = &priv->init_alive_start;
 591         } else {
 592                 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 593                 memcpy(&priv->card_alive, &pkt->u.alive_frame,
 594                        sizeof(struct iwl_alive_resp));
 595                 pwork = &priv->alive_start;
 596         }
 597
 598         /* We delay the ALIVE response by 5ms to
 599          * give the HW RF Kill time to activate... */
 600         if (palive->is_valid == UCODE_VALID_OK)
 601                 queue_delayed_work(priv->workqueue, pwork,
 602                                    msecs_to_jiffies(5));
 603         else
 604                 IWL_WARN(priv, "uCode did not respond OK.\n");
 605 }
 606
 607 static void iwl_bg_beacon_update(struct work_struct *work)
 608 {
 609         struct iwl_priv *priv =
 610                 container_of(work, struct iwl_priv, beacon_update);
 611         struct sk_buff *beacon;
 612
 613         /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
 614         beacon = ieee80211_beacon_get(priv->hw, priv->vif);
 615
 616         if (!beacon) {
 617                 IWL_ERR(priv, "update beacon failed\n");
 618                 return;
 619         }
 620
 621         mutex_lock(&priv->mutex);
 622         /* new beacon skb is allocated every time; dispose previous.*/
 623         if (priv->ibss_beacon)
 624                 dev_kfree_skb(priv->ibss_beacon);
 625
 626         priv->ibss_beacon = beacon;
 627         mutex_unlock(&priv->mutex);
 628
 629         iwl_send_beacon_cmd(priv);
 630 }
 631
 632 /**
 633  * iwl_bg_statistics_periodic - Timer callback to queue statistics
 634  *
 635  * This callback is provided in order to send a statistics request.
 636  *
 637  * This timer function is continually reset to execute within
 638  * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
 639  * was received.  We need to ensure we receive the statistics in order
 640  * to update the temperature used for calibrating the TXPOWER.
 641  */
 642 static void iwl_bg_statistics_periodic(unsigned long data)
 643 {
 644         struct iwl_priv *priv = (struct iwl_priv *)data;
 645
 646         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 647                 return;
 648
 649         /* dont send host command if rf-kill is on */
 650         if (!iwl_is_ready_rf(priv))
 651                 return;
 652
 653         iwl_send_statistics_request(priv, CMD_ASYNC, false);
 654 }
 655
 656
 657 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
 658                                         u32 start_idx, u32 num_events,
 659                                         u32 mode)
 660 {
 661         u32 i;
 662         u32 ptr;        /* SRAM byte address of log data */
 663         u32 ev, time, data; /* event log data */
 664         unsigned long reg_flags;
 665
 666         if (mode == 0)
 667                 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
 668         else
 669                 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
 670
 671         /* Make sure device is powered up for SRAM reads */
 672         spin_lock_irqsave(&priv->reg_lock, reg_flags);
 673         if (iwl_grab_nic_access(priv)) {
 674                 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 675                 return;
 676         }
 677
 678         /* Set starting address; reads will auto-increment */
 679         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
 680         rmb();
 681
 682         /*
 683          * "time" is actually "data" for mode 0 (no timestamp).
 684          * place event id # at far right for easier visual parsing.
 685          */
 686         for (i = 0; i < num_events; i++) {
 687                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 688                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 689                 if (mode == 0) {
 690                         trace_iwlwifi_dev_ucode_cont_event(priv,
 691                                                         0, time, ev);
 692                 } else {
 693                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 694                         trace_iwlwifi_dev_ucode_cont_event(priv,
 695                                                 time, data, ev);
 696                 }
 697         }
 698         /* Allow device to power down */
 699         iwl_release_nic_access(priv);
 700         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 701 }
 702
 703 static void iwl_continuous_event_trace(struct iwl_priv *priv)
 704 {
 705         u32 capacity;   /* event log capacity in # entries */
 706         u32 base;       /* SRAM byte address of event log header */
 707         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
 708         u32 num_wraps;  /* # times uCode wrapped to top of log */
 709         u32 next_entry; /* index of next entry to be written by uCode */
 710
 711         if (priv->ucode_type == UCODE_INIT)
 712                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
 713         else
 714                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 715         if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
 716                 capacity = iwl_read_targ_mem(priv, base);
 717                 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
 718                 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
 719                 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
 720         } else
 721                 return;
 722
 723         if (num_wraps == priv->event_log.num_wraps) {
 724                 iwl_print_cont_event_trace(priv,
 725                                        base, priv->event_log.next_entry,
 726                                        next_entry - priv->event_log.next_entry,
 727                                        mode);
 728                 priv->event_log.non_wraps_count++;
 729         } else {
 730                 if ((num_wraps - priv->event_log.num_wraps) > 1)
 731                         priv->event_log.wraps_more_count++;
 732                 else
 733                         priv->event_log.wraps_once_count++;
 734                 trace_iwlwifi_dev_ucode_wrap_event(priv,
 735                                 num_wraps - priv->event_log.num_wraps,
 736                                 next_entry, priv->event_log.next_entry);
 737                 if (next_entry < priv->event_log.next_entry) {
 738                         iwl_print_cont_event_trace(priv, base,
 739                                priv->event_log.next_entry,
 740                                capacity - priv->event_log.next_entry,
 741                                mode);
 742
 743                         iwl_print_cont_event_trace(priv, base, 0,
 744                                 next_entry, mode);
 745                 } else {
 746                         iwl_print_cont_event_trace(priv, base,
 747                                next_entry, capacity - next_entry,
 748                                mode);
 749
 750                         iwl_print_cont_event_trace(priv, base, 0,
 751                                 next_entry, mode);
 752                 }
 753         }
 754         priv->event_log.num_wraps = num_wraps;
 755         priv->event_log.next_entry = next_entry;
 756 }
 757
 758 /**
 759  * iwl_bg_ucode_trace - Timer callback to log ucode event
 760  *
 761  * The timer is continually set to execute every
 762  * UCODE_TRACE_PERIOD milliseconds after the last timer expired
 763  * this function is to perform continuous uCode event logging operation
 764  * if enabled
 765  */
 766 static void iwl_bg_ucode_trace(unsigned long data)
 767 {
 768         struct iwl_priv *priv = (struct iwl_priv *)data;
 769
 770         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 771                 return;
 772
 773         if (priv->event_log.ucode_trace) {
 774                 iwl_continuous_event_trace(priv);
 775                 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
 776                 mod_timer(&priv->ucode_trace,
 777                          jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
 778         }
 779 }
 780
 781 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
 782                                 struct iwl_rx_mem_buffer *rxb)
 783 {
 784 #ifdef CONFIG_IWLWIFI_DEBUG
 785         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 786         struct iwl4965_beacon_notif *beacon =
 787                 (struct iwl4965_beacon_notif *)pkt->u.raw;
 788         u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
 789
 790         IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
 791                 "tsf %d %d rate %d\n",
 792                 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
 793                 beacon->beacon_notify_hdr.failure_frame,
 794                 le32_to_cpu(beacon->ibss_mgr_status),
 795                 le32_to_cpu(beacon->high_tsf),
 796                 le32_to_cpu(beacon->low_tsf), rate);
 797 #endif
 798
 799         if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
 800             (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
 801                 queue_work(priv->workqueue, &priv->beacon_update);
 802 }
 803
 804 /* Handle notification from uCode that card's power state is changing
 805  * due to software, hardware, or critical temperature RFKILL */
 806 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 807                                     struct iwl_rx_mem_buffer *rxb)
 808 {
 809         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 810         u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 811         unsigned long status = priv->status;
 812
 813         IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
 814                           (flags & HW_CARD_DISABLED) ? "Kill" : "On",
 815                           (flags & SW_CARD_DISABLED) ? "Kill" : "On",
 816                           (flags & CT_CARD_DISABLED) ?
 817                           "Reached" : "Not reached");
 818
 819         if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
 820                      CT_CARD_DISABLED)) {
 821
 822                 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 823                             CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 824
 825                 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 826                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 827
 828                 if (!(flags & RXON_CARD_DISABLED)) {
 829                         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
 830                                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 831                         iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 832                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 833                 }
 834                 if (flags & CT_CARD_DISABLED)
 835                         iwl_tt_enter_ct_kill(priv);
 836         }
 837         if (!(flags & CT_CARD_DISABLED))
 838                 iwl_tt_exit_ct_kill(priv);
 839
 840         if (flags & HW_CARD_DISABLED)
 841                 set_bit(STATUS_RF_KILL_HW, &priv->status);
 842         else
 843                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
 844
 845
 846         if (!(flags & RXON_CARD_DISABLED))
 847                 iwl_scan_cancel(priv);
 848
 849         if ((test_bit(STATUS_RF_KILL_HW, &status) !=
 850              test_bit(STATUS_RF_KILL_HW, &priv->status)))
 851                 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
 852                         test_bit(STATUS_RF_KILL_HW, &priv->status));
 853         else
 854                 wake_up_interruptible(&priv->wait_command_queue);
 855 }
 856
 857 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 858 {
 859         if (src == IWL_PWR_SRC_VAUX) {
 860                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
 861                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 862                                                APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 863                                                ~APMG_PS_CTRL_MSK_PWR_SRC);
 864         } else {
 865                 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 866                                        APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 867                                        ~APMG_PS_CTRL_MSK_PWR_SRC);
 868         }
 869
 870         return 0;
 871 }
 872
 873 /**
 874  * iwl_setup_rx_handlers - Initialize Rx handler callbacks
 875  *
 876  * Setup the RX handlers for each of the reply types sent from the uCode
 877  * to the host.
 878  *
 879  * This function chains into the hardware specific files for them to setup
 880  * any hardware specific handlers as well.
 881  */
 882 static void iwl_setup_rx_handlers(struct iwl_priv *priv)
 883 {
 884         priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
 885         priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
 886         priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
 887         priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
 888                         iwl_rx_spectrum_measure_notif;
 889         priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
 890         priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
 891             iwl_rx_pm_debug_statistics_notif;
 892         priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
 893
 894         /*
 895          * The same handler is used for both the REPLY to a discrete
 896          * statistics request from the host as well as for the periodic
 897          * statistics notifications (after received beacons) from the uCode.
 898          */
 899         priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
 900         priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
 901
 902         iwl_setup_rx_scan_handlers(priv);
 903
 904         /* status change handler */
 905         priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
 906
 907         priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
 908             iwl_rx_missed_beacon_notif;
 909         /* Rx handlers */
 910         priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
 911         priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
 912         /* block ack */
 913         priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba;
 914         /* Set up hardware specific Rx handlers */
 915         priv->cfg->ops->lib->rx_handler_setup(priv);
 916 }
 917
 918 /**
 919  * iwl_rx_handle - Main entry function for receiving responses from uCode
 920  *
 921  * Uses the priv->rx_handlers callback function array to invoke
 922  * the appropriate handlers, including command responses,
 923  * frame-received notifications, and other notifications.
 924  */
 925 void iwl_rx_handle(struct iwl_priv *priv)
 926 {
 927         struct iwl_rx_mem_buffer *rxb;
 928         struct iwl_rx_packet *pkt;
 929         struct iwl_rx_queue *rxq = &priv->rxq;
 930         u32 r, i;
 931         int reclaim;
 932         unsigned long flags;
 933         u8 fill_rx = 0;
 934         u32 count = 8;
 935         int total_empty;
 936
 937         /* uCode's read index (stored in shared DRAM) indicates the last Rx
 938          * buffer that the driver may process (last buffer filled by ucode). */
 939         r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
 940         i = rxq->read;
 941
 942         /* Rx interrupt, but nothing sent from uCode */
 943         if (i == r)
 944                 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 945
 946         /* calculate total frames need to be restock after handling RX */
 947         total_empty = r - rxq->write_actual;
 948         if (total_empty < 0)
 949                 total_empty += RX_QUEUE_SIZE;
 950
 951         if (total_empty > (RX_QUEUE_SIZE / 2))
 952                 fill_rx = 1;
 953
 954         while (i != r) {
 955                 rxb = rxq->queue[i];
 956
 957                 /* If an RXB doesn't have a Rx queue slot associated with it,
 958                  * then a bug has been introduced in the queue refilling
 959                  * routines -- catch it here */
 960                 BUG_ON(rxb == NULL);
 961
 962                 rxq->queue[i] = NULL;
 963
 964                 pci_unmap_page(priv->pci_dev, rxb->page_dma,
 965                                PAGE_SIZE << priv->hw_params.rx_page_order,
 966                                PCI_DMA_FROMDEVICE);
 967                 pkt = rxb_addr(rxb);
 968
 969                 trace_iwlwifi_dev_rx(priv, pkt,
 970                         le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 971
 972                 /* Reclaim a command buffer only if this packet is a response
 973                  *   to a (driver-originated) command.
 974                  * If the packet (e.g. Rx frame) originated from uCode,
 975                  *   there is no command buffer to reclaim.
 976                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
 977                  *   but apparently a few don't get set; catch them here. */
 978                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
 979                         (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
 980                         (pkt->hdr.cmd != REPLY_RX) &&
 981                         (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
 982                         (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
 983                         (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
 984                         (pkt->hdr.cmd != REPLY_TX);
 985
 986                 /* Based on type of command response or notification,
 987                  *   handle those that need handling via function in
 988                  *   rx_handlers table.  See iwl_setup_rx_handlers() */
 989                 if (priv->rx_handlers[pkt->hdr.cmd]) {
 990                         IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 991                                 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 992                         priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
 993                         priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 994                 } else {
 995                         /* No handling needed */
 996                         IWL_DEBUG_RX(priv,
 997                                 "r %d i %d No handler needed for %s, 0x%02x\n",
 998                                 r, i, get_cmd_string(pkt->hdr.cmd),
 999                                 pkt->hdr.cmd);
1000                 }
1001
1002                 /*
1003                  * XXX: After here, we should always check rxb->page
1004                  * against NULL before touching it or its virtual
1005                  * memory (pkt). Because some rx_handler might have
1006                  * already taken or freed the pages.
1007                  */
1008
1009                 if (reclaim) {
1010                         /* Invoke any callbacks, transfer the buffer to caller,
1011                          * and fire off the (possibly) blocking iwl_send_cmd()
1012                          * as we reclaim the driver command queue */
1013                         if (rxb->page)
1014                                 iwl_tx_cmd_complete(priv, rxb);
1015                         else
1016                                 IWL_WARN(priv, "Claim null rxb?\n");
1017                 }
1018
1019                 /* Reuse the page if possible. For notification packets and
1020                  * SKBs that fail to Rx correctly, add them back into the
1021                  * rx_free list for reuse later. */
1022                 spin_lock_irqsave(&rxq->lock, flags);
1023                 if (rxb->page != NULL) {
1024                         rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
1025                                 0, PAGE_SIZE << priv->hw_params.rx_page_order,
1026                                 PCI_DMA_FROMDEVICE);
1027                         list_add_tail(&rxb->list, &rxq->rx_free);
1028                         rxq->free_count++;
1029                 } else
1030                         list_add_tail(&rxb->list, &rxq->rx_used);
1031
1032                 spin_unlock_irqrestore(&rxq->lock, flags);
1033
1034                 i = (i + 1) & RX_QUEUE_MASK;
1035                 /* If there are a lot of unused frames,
1036                  * restock the Rx queue so ucode wont assert. */
1037                 if (fill_rx) {
1038                         count++;
1039                         if (count >= 8) {
1040                                 rxq->read = i;
1041                                 iwl_rx_replenish_now(priv);
1042                                 count = 0;
1043                         }
1044                 }
1045         }
1046
1047         /* Backtrack one entry */
1048         rxq->read = i;
1049         if (fill_rx)
1050                 iwl_rx_replenish_now(priv);
1051         else
1052                 iwl_rx_queue_restock(priv);
1053 }
1054
1055 /* call this function to flush any scheduled tasklet */
1056 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
1057 {
1058         /* wait to make sure we flush pending tasklet*/
1059         synchronize_irq(priv->pci_dev->irq);
1060         tasklet_kill(&priv->irq_tasklet);
1061 }
1062
1063 static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
1064 {
1065         u32 inta, handled = 0;
1066         u32 inta_fh;
1067         unsigned long flags;
1068         u32 i;
1069 #ifdef CONFIG_IWLWIFI_DEBUG
1070         u32 inta_mask;
1071 #endif
1072
1073         spin_lock_irqsave(&priv->lock, flags);
1074
1075         /* Ack/clear/reset pending uCode interrupts.
1076          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1077          *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1078         inta = iwl_read32(priv, CSR_INT);
1079         iwl_write32(priv, CSR_INT, inta);
1080
1081         /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1082          * Any new interrupts that happen after this, either while we're
1083          * in this tasklet, or later, will show up in next ISR/tasklet. */
1084         inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1085         iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
1086
1087 #ifdef CONFIG_IWLWIFI_DEBUG
1088         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1089                 /* just for debug */
1090                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1091                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1092                               inta, inta_mask, inta_fh);
1093         }
1094 #endif
1095
1096         spin_unlock_irqrestore(&priv->lock, flags);
1097
1098         /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1099          * atomic, make sure that inta covers all the interrupts that
1100          * we've discovered, even if FH interrupt came in just after
1101          * reading CSR_INT. */
1102         if (inta_fh & CSR49_FH_INT_RX_MASK)
1103                 inta |= CSR_INT_BIT_FH_RX;
1104         if (inta_fh & CSR49_FH_INT_TX_MASK)
1105                 inta |= CSR_INT_BIT_FH_TX;
1106
1107         /* Now service all interrupt bits discovered above. */
1108         if (inta & CSR_INT_BIT_HW_ERR) {
1109                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1110
1111                 /* Tell the device to stop sending interrupts */
1112                 iwl_disable_interrupts(priv);
1113
1114                 priv->isr_stats.hw++;
1115                 iwl_irq_handle_error(priv);
1116
1117                 handled |= CSR_INT_BIT_HW_ERR;
1118
1119                 return;
1120         }
1121
1122 #ifdef CONFIG_IWLWIFI_DEBUG
1123         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1124                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1125                 if (inta & CSR_INT_BIT_SCD) {
1126                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1127                                       "the frame/frames.\n");
1128                         priv->isr_stats.sch++;
1129                 }
1130
1131                 /* Alive notification via Rx interrupt will do the real work */
1132                 if (inta & CSR_INT_BIT_ALIVE) {
1133                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1134                         priv->isr_stats.alive++;
1135                 }
1136         }
1137 #endif
1138         /* Safely ignore these bits for debug checks below */
1139         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1140
1141         /* HW RF KILL switch toggled */
1142         if (inta & CSR_INT_BIT_RF_KILL) {
1143                 int hw_rf_kill = 0;
1144                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1145                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1146                         hw_rf_kill = 1;
1147
1148                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1149                                 hw_rf_kill ? "disable radio" : "enable radio");
1150
1151                 priv->isr_stats.rfkill++;
1152
1153                 /* driver only loads ucode once setting the interface up.
1154                  * the driver allows loading the ucode even if the radio
1155                  * is killed. Hence update the killswitch state here. The
1156                  * rfkill handler will care about restarting if needed.
1157                  */
1158                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1159                         if (hw_rf_kill)
1160                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1161                         else
1162                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1163                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1164                 }
1165
1166                 handled |= CSR_INT_BIT_RF_KILL;
1167         }
1168
1169         /* Chip got too hot and stopped itself */
1170         if (inta & CSR_INT_BIT_CT_KILL) {
1171                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1172                 priv->isr_stats.ctkill++;
1173                 handled |= CSR_INT_BIT_CT_KILL;
1174         }
1175
1176         /* Error detected by uCode */
1177         if (inta & CSR_INT_BIT_SW_ERR) {
1178                 IWL_ERR(priv, "Microcode SW error detected. "
1179                         " Restarting 0x%X.\n", inta);
1180                 priv->isr_stats.sw++;
1181                 priv->isr_stats.sw_err = inta;
1182                 iwl_irq_handle_error(priv);
1183                 handled |= CSR_INT_BIT_SW_ERR;
1184         }
1185
1186         /*
1187          * uCode wakes up after power-down sleep.
1188          * Tell device about any new tx or host commands enqueued,
1189          * and about any Rx buffers made available while asleep.
1190          */
1191         if (inta & CSR_INT_BIT_WAKEUP) {
1192                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1193                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1194                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1195                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1196                 priv->isr_stats.wakeup++;
1197                 handled |= CSR_INT_BIT_WAKEUP;
1198         }
1199
1200         /* All uCode command responses, including Tx command responses,
1201          * Rx "responses" (frame-received notification), and other
1202          * notifications from uCode come through here*/
1203         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1204                 iwl_rx_handle(priv);
1205                 priv->isr_stats.rx++;
1206                 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1207         }
1208
1209         /* This "Tx" DMA channel is used only for loading uCode */
1210         if (inta & CSR_INT_BIT_FH_TX) {
1211                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1212                 priv->isr_stats.tx++;
1213                 handled |= CSR_INT_BIT_FH_TX;
1214                 /* Wake up uCode load routine, now that load is complete */
1215                 priv->ucode_write_complete = 1;
1216                 wake_up_interruptible(&priv->wait_command_queue);
1217         }
1218
1219         if (inta & ~handled) {
1220                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1221                 priv->isr_stats.unhandled++;
1222         }
1223
1224         if (inta & ~(priv->inta_mask)) {
1225                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1226                          inta & ~priv->inta_mask);
1227                 IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
1228         }
1229
1230         /* Re-enable all interrupts */
1231         /* only Re-enable if diabled by irq */
1232         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1233                 iwl_enable_interrupts(priv);
1234
1235 #ifdef CONFIG_IWLWIFI_DEBUG
1236         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1237                 inta = iwl_read32(priv, CSR_INT);
1238                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1239                 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1240                 IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1241                         "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1242         }
1243 #endif
1244 }
1245
1246 /* tasklet for iwlagn interrupt */
1247 static void iwl_irq_tasklet(struct iwl_priv *priv)
1248 {
1249         u32 inta = 0;
1250         u32 handled = 0;
1251         unsigned long flags;
1252         u32 i;
1253 #ifdef CONFIG_IWLWIFI_DEBUG
1254         u32 inta_mask;
1255 #endif
1256
1257         spin_lock_irqsave(&priv->lock, flags);
1258
1259         /* Ack/clear/reset pending uCode interrupts.
1260          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1261          */
1262         iwl_write32(priv, CSR_INT, priv->_agn.inta);
1263
1264         inta = priv->_agn.inta;
1265
1266 #ifdef CONFIG_IWLWIFI_DEBUG
1267         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1268                 /* just for debug */
1269                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1270                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
1271                                 inta, inta_mask);
1272         }
1273 #endif
1274
1275         spin_unlock_irqrestore(&priv->lock, flags);
1276
1277         /* saved interrupt in inta variable now we can reset priv->_agn.inta */
1278         priv->_agn.inta = 0;
1279
1280         /* Now service all interrupt bits discovered above. */
1281         if (inta & CSR_INT_BIT_HW_ERR) {
1282                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1283
1284                 /* Tell the device to stop sending interrupts */
1285                 iwl_disable_interrupts(priv);
1286
1287                 priv->isr_stats.hw++;
1288                 iwl_irq_handle_error(priv);
1289
1290                 handled |= CSR_INT_BIT_HW_ERR;
1291
1292                 return;
1293         }
1294
1295 #ifdef CONFIG_IWLWIFI_DEBUG
1296         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1297                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1298                 if (inta & CSR_INT_BIT_SCD) {
1299                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1300                                       "the frame/frames.\n");
1301                         priv->isr_stats.sch++;
1302                 }
1303
1304                 /* Alive notification via Rx interrupt will do the real work */
1305                 if (inta & CSR_INT_BIT_ALIVE) {
1306                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1307                         priv->isr_stats.alive++;
1308                 }
1309         }
1310 #endif
1311         /* Safely ignore these bits for debug checks below */
1312         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1313
1314         /* HW RF KILL switch toggled */
1315         if (inta & CSR_INT_BIT_RF_KILL) {
1316                 int hw_rf_kill = 0;
1317                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1318                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1319                         hw_rf_kill = 1;
1320
1321                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1322                                 hw_rf_kill ? "disable radio" : "enable radio");
1323
1324                 priv->isr_stats.rfkill++;
1325
1326                 /* driver only loads ucode once setting the interface up.
1327                  * the driver allows loading the ucode even if the radio
1328                  * is killed. Hence update the killswitch state here. The
1329                  * rfkill handler will care about restarting if needed.
1330                  */
1331                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1332                         if (hw_rf_kill)
1333                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1334                         else
1335                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1336                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1337                 }
1338
1339                 handled |= CSR_INT_BIT_RF_KILL;
1340         }
1341
1342         /* Chip got too hot and stopped itself */
1343         if (inta & CSR_INT_BIT_CT_KILL) {
1344                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1345                 priv->isr_stats.ctkill++;
1346                 handled |= CSR_INT_BIT_CT_KILL;
1347         }
1348
1349         /* Error detected by uCode */
1350         if (inta & CSR_INT_BIT_SW_ERR) {
1351                 IWL_ERR(priv, "Microcode SW error detected. "
1352                         " Restarting 0x%X.\n", inta);
1353                 priv->isr_stats.sw++;
1354                 priv->isr_stats.sw_err = inta;
1355                 iwl_irq_handle_error(priv);
1356                 handled |= CSR_INT_BIT_SW_ERR;
1357         }
1358
1359         /* uCode wakes up after power-down sleep */
1360         if (inta & CSR_INT_BIT_WAKEUP) {
1361                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1362                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1363                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1364                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1365
1366                 priv->isr_stats.wakeup++;
1367
1368                 handled |= CSR_INT_BIT_WAKEUP;
1369         }
1370
1371         /* All uCode command responses, including Tx command responses,
1372          * Rx "responses" (frame-received notification), and other
1373          * notifications from uCode come through here*/
1374         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1375                         CSR_INT_BIT_RX_PERIODIC)) {
1376                 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
1377                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1378                         handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1379                         iwl_write32(priv, CSR_FH_INT_STATUS,
1380                                         CSR49_FH_INT_RX_MASK);
1381                 }
1382                 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1383                         handled |= CSR_INT_BIT_RX_PERIODIC;
1384                         iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1385                 }
1386                 /* Sending RX interrupt require many steps to be done in the
1387                  * the device:
1388                  * 1- write interrupt to current index in ICT table.
1389                  * 2- dma RX frame.
1390                  * 3- update RX shared data to indicate last write index.
1391                  * 4- send interrupt.
1392                  * This could lead to RX race, driver could receive RX interrupt
1393                  * but the shared data changes does not reflect this;
1394                  * periodic interrupt will detect any dangling Rx activity.
1395                  */
1396
1397                 /* Disable periodic interrupt; we use it as just a one-shot. */
1398                 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1399                             CSR_INT_PERIODIC_DIS);
1400                 iwl_rx_handle(priv);
1401
1402                 /*
1403                  * Enable periodic interrupt in 8 msec only if we received
1404                  * real RX interrupt (instead of just periodic int), to catch
1405                  * any dangling Rx interrupt.  If it was just the periodic
1406                  * interrupt, there was no dangling Rx activity, and no need
1407                  * to extend the periodic interrupt; one-shot is enough.
1408                  */
1409                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1410                         iwl_write8(priv, CSR_INT_PERIODIC_REG,
1411                                     CSR_INT_PERIODIC_ENA);
1412
1413                 priv->isr_stats.rx++;
1414         }
1415
1416         /* This "Tx" DMA channel is used only for loading uCode */
1417         if (inta & CSR_INT_BIT_FH_TX) {
1418                 iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
1419                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1420                 priv->isr_stats.tx++;
1421                 handled |= CSR_INT_BIT_FH_TX;
1422                 /* Wake up uCode load routine, now that load is complete */
1423                 priv->ucode_write_complete = 1;
1424                 wake_up_interruptible(&priv->wait_command_queue);
1425         }
1426
1427         if (inta & ~handled) {
1428                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1429                 priv->isr_stats.unhandled++;
1430         }
1431
1432         if (inta & ~(priv->inta_mask)) {
1433                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1434                          inta & ~priv->inta_mask);
1435         }
1436
1437         /* Re-enable all interrupts */
1438         /* only Re-enable if diabled by irq */
1439         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1440                 iwl_enable_interrupts(priv);
1441 }
1442
1443
1444 /******************************************************************************
1445  *
1446  * uCode download functions
1447  *
1448  ******************************************************************************/
1449
1450 static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
1451 {
1452         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
1453         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
1454         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1455         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
1456         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1457         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
1458 }
1459
1460 static void iwl_nic_start(struct iwl_priv *priv)
1461 {
1462         /* Remove all resets to allow NIC to operate */
1463         iwl_write32(priv, CSR_RESET, 0);
1464 }
1465
1466
1467 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1468 static int iwl_mac_setup_register(struct iwl_priv *priv);
1469
1470 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1471 {
1472         const char *name_pre = priv->cfg->fw_name_pre;
1473
1474         if (first)
1475                 priv->fw_index = priv->cfg->ucode_api_max;
1476         else
1477                 priv->fw_index--;
1478
1479         if (priv->fw_index < priv->cfg->ucode_api_min) {
1480                 IWL_ERR(priv, "no suitable firmware found!\n");
1481                 return -ENOENT;
1482         }
1483
1484         sprintf(priv->firmware_name, "%s%d%s",
1485                 name_pre, priv->fw_index, ".ucode");
1486
1487         IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
1488                        priv->firmware_name);
1489
1490         return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1491                                        &priv->pci_dev->dev, GFP_KERNEL, priv,
1492                                        iwl_ucode_callback);
1493 }
1494
1495 /**
1496  * iwl_ucode_callback - callback when firmware was loaded
1497  *
1498  * If loaded successfully, copies the firmware into buffers
1499  * for the card to fetch (via DMA).
1500  */
1501 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1502 {
1503         struct iwl_priv *priv = context;
1504         struct iwl_ucode_header *ucode;
1505         const unsigned int api_max = priv->cfg->ucode_api_max;
1506         const unsigned int api_min = priv->cfg->ucode_api_min;
1507         u8 *src;
1508         size_t len;
1509         u32 api_ver, build;
1510         u32 inst_size, data_size, init_size, init_data_size, boot_size;
1511         int err;
1512         u16 eeprom_ver;
1513
1514         if (!ucode_raw) {
1515                 IWL_ERR(priv, "request for firmware file '%s' failed.\n",
1516                         priv->firmware_name);
1517                 goto try_again;
1518         }
1519
1520         IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1521                        priv->firmware_name, ucode_raw->size);
1522
1523         /* Make sure that we got at least the v1 header! */
1524         if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
1525                 IWL_ERR(priv, "File size way too small!\n");
1526                 goto try_again;
1527         }
1528
1529         /* Data from ucode file:  header followed by uCode images */
1530         ucode = (struct iwl_ucode_header *)ucode_raw->data;
1531
1532         priv->ucode_ver = le32_to_cpu(ucode->ver);
1533         api_ver = IWL_UCODE_API(priv->ucode_ver);
1534         build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
1535         inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
1536         data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
1537         init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
1538         init_data_size =
1539                 priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
1540         boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
1541         src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
1542
1543         /* api_ver should match the api version forming part of the
1544          * firmware filename ... but we don't check for that and only rely
1545          * on the API version read from firmware header from here on forward */
1546
1547         if (api_ver < api_min || api_ver > api_max) {
1548                 IWL_ERR(priv, "Driver unable to support your firmware API. "
1549                           "Driver supports v%u, firmware is v%u.\n",
1550                           api_max, api_ver);
1551                 goto try_again;
1552         }
1553
1554         if (api_ver != api_max)
1555                 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
1556                           "got v%u. New firmware can be obtained "
1557                           "from http://www.intellinuxwireless.org.\n",
1558                           api_max, api_ver);
1559
1560         IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
1561                IWL_UCODE_MAJOR(priv->ucode_ver),
1562                IWL_UCODE_MINOR(priv->ucode_ver),
1563                IWL_UCODE_API(priv->ucode_ver),
1564                IWL_UCODE_SERIAL(priv->ucode_ver));
1565
1566         snprintf(priv->hw->wiphy->fw_version,
1567                  sizeof(priv->hw->wiphy->fw_version),
1568                  "%u.%u.%u.%u",
1569                  IWL_UCODE_MAJOR(priv->ucode_ver),
1570                  IWL_UCODE_MINOR(priv->ucode_ver),
1571                  IWL_UCODE_API(priv->ucode_ver),
1572                  IWL_UCODE_SERIAL(priv->ucode_ver));
1573
1574         if (build)
1575                 IWL_DEBUG_INFO(priv, "Build %u\n", build);
1576
1577         eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
1578         IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
1579                        (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
1580                        ? "OTP" : "EEPROM", eeprom_ver);
1581
1582         IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1583                        priv->ucode_ver);
1584         IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
1585                        inst_size);
1586         IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
1587                        data_size);
1588         IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
1589                        init_size);
1590         IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
1591                        init_data_size);
1592         IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
1593                        boot_size);
1594
1595         /*
1596          * For any of the failures below (before allocating pci memory)
1597          * we will try to load a version with a smaller API -- maybe the
1598          * user just got a corrupted version of the latest API.
1599          */
1600
1601         /* Verify size of file vs. image size info in file's header */
1602         if (ucode_raw->size !=
1603                 priv->cfg->ops->ucode->get_header_size(api_ver) +
1604                 inst_size + data_size + init_size +
1605                 init_data_size + boot_size) {
1606
1607                 IWL_DEBUG_INFO(priv,
1608                         "uCode file size %d does not match expected size\n",
1609                         (int)ucode_raw->size);
1610                 goto try_again;
1611         }
1612
1613         /* Verify that uCode images will fit in card's SRAM */
1614         if (inst_size > priv->hw_params.max_inst_size) {
1615                 IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
1616                                inst_size);
1617                 goto try_again;
1618         }
1619
1620         if (data_size > priv->hw_params.max_data_size) {
1621                 IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
1622                                 data_size);
1623                 goto try_again;
1624         }
1625         if (init_size > priv->hw_params.max_inst_size) {
1626                 IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
1627                         init_size);
1628                 goto try_again;
1629         }
1630         if (init_data_size > priv->hw_params.max_data_size) {
1631                 IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
1632                       init_data_size);
1633                 goto try_again;
1634         }
1635         if (boot_size > priv->hw_params.max_bsm_size) {
1636                 IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
1637                         boot_size);
1638                 goto try_again;
1639         }
1640
1641         /* Allocate ucode buffers for card's bus-master loading ... */
1642
1643         /* Runtime instructions and 2 copies of data:
1644          * 1) unmodified from disk
1645          * 2) backup cache for save/restore during power-downs */
1646         priv->ucode_code.len = inst_size;
1647         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
1648
1649         priv->ucode_data.len = data_size;
1650         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
1651
1652         priv->ucode_data_backup.len = data_size;
1653         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1654
1655         if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
1656             !priv->ucode_data_backup.v_addr)
1657                 goto err_pci_alloc;
1658
1659         /* Initialization instructions and data */
1660         if (init_size && init_data_size) {
1661                 priv->ucode_init.len = init_size;
1662                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
1663
1664                 priv->ucode_init_data.len = init_data_size;
1665                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1666
1667                 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
1668                         goto err_pci_alloc;
1669         }
1670
1671         /* Bootstrap (instructions only, no data) */
1672         if (boot_size) {
1673                 priv->ucode_boot.len = boot_size;
1674                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
1675
1676                 if (!priv->ucode_boot.v_addr)
1677                         goto err_pci_alloc;
1678         }
1679
1680         /* Copy images into buffers for card's bus-master reads ... */
1681
1682         /* Runtime instructions (first block of data in file) */
1683         len = inst_size;
1684         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
1685         memcpy(priv->ucode_code.v_addr, src, len);
1686         src += len;
1687
1688         IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
1689                 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
1690
1691         /* Runtime data (2nd block)
1692          * NOTE:  Copy into backup buffer will be done in iwl_up()  */
1693         len = data_size;
1694         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
1695         memcpy(priv->ucode_data.v_addr, src, len);
1696         memcpy(priv->ucode_data_backup.v_addr, src, len);
1697         src += len;
1698
1699         /* Initialization instructions (3rd block) */
1700         if (init_size) {
1701                 len = init_size;
1702                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
1703                                 len);
1704                 memcpy(priv->ucode_init.v_addr, src, len);
1705                 src += len;
1706         }
1707
1708         /* Initialization data (4th block) */
1709         if (init_data_size) {
1710                 len = init_data_size;
1711                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
1712                                len);
1713                 memcpy(priv->ucode_init_data.v_addr, src, len);
1714                 src += len;
1715         }
1716
1717         /* Bootstrap instructions (5th block) */
1718         len = boot_size;
1719         IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
1720         memcpy(priv->ucode_boot.v_addr, src, len);
1721
1722         /**************************************************
1723          * This is still part of probe() in a sense...
1724          *
1725          * 9. Setup and register with mac80211 and debugfs
1726          **************************************************/
1727         err = iwl_mac_setup_register(priv);
1728         if (err)
1729                 goto out_unbind;
1730
1731         err = iwl_dbgfs_register(priv, DRV_NAME);
1732         if (err)
1733                 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1734
1735         /* We have our copies now, allow OS release its copies */
1736         release_firmware(ucode_raw);
1737         return;
1738
1739  try_again:
1740         /* try next, if any */
1741         if (iwl_request_firmware(priv, false))
1742                 goto out_unbind;
1743         release_firmware(ucode_raw);
1744         return;
1745
1746  err_pci_alloc:
1747         IWL_ERR(priv, "failed to allocate pci memory\n");
1748         iwl_dealloc_ucode_pci(priv);
1749  out_unbind:
1750         device_release_driver(&priv->pci_dev->dev);
1751         release_firmware(ucode_raw);
1752 }
1753
1754 static const char *desc_lookup_text[] = {
1755         "OK",
1756         "FAIL",
1757         "BAD_PARAM",
1758         "BAD_CHECKSUM",
1759         "NMI_INTERRUPT_WDG",
1760         "SYSASSERT",
1761         "FATAL_ERROR",
1762         "BAD_COMMAND",
1763         "HW_ERROR_TUNE_LOCK",
1764         "HW_ERROR_TEMPERATURE",
1765         "ILLEGAL_CHAN_FREQ",
1766         "VCC_NOT_STABLE",
1767         "FH_ERROR",
1768         "NMI_INTERRUPT_HOST",
1769         "NMI_INTERRUPT_ACTION_PT",
1770         "NMI_INTERRUPT_UNKNOWN",
1771         "UCODE_VERSION_MISMATCH",
1772         "HW_ERROR_ABS_LOCK",
1773         "HW_ERROR_CAL_LOCK_FAIL",
1774         "NMI_INTERRUPT_INST_ACTION_PT",
1775         "NMI_INTERRUPT_DATA_ACTION_PT",
1776         "NMI_TRM_HW_ER",
1777         "NMI_INTERRUPT_TRM",
1778         "NMI_INTERRUPT_BREAK_POINT"
1779         "DEBUG_0",
1780         "DEBUG_1",
1781         "DEBUG_2",
1782         "DEBUG_3",
1783         "ADVANCED SYSASSERT"
1784 };
1785
1786 static const char *desc_lookup(int i)
1787 {
1788         int max = ARRAY_SIZE(desc_lookup_text) - 1;
1789
1790         if (i < 0 || i > max)
1791                 i = max;
1792
1793         return desc_lookup_text[i];
1794 }
1795
1796 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1797 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1798
1799 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1800 {
1801         u32 data2, line;
1802         u32 desc, time, count, base, data1;
1803         u32 blink1, blink2, ilink1, ilink2;
1804
1805         if (priv->ucode_type == UCODE_INIT)
1806                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1807         else
1808                 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1809
1810         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1811                 IWL_ERR(priv,
1812                         "Not valid error log pointer 0x%08X for %s uCode\n",
1813                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1814                 return;
1815         }
1816
1817         count = iwl_read_targ_mem(priv, base);
1818
1819         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1820                 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1821                 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1822                         priv->status, count);
1823         }
1824
1825         desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1826         blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1827         blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1828         ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1829         ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1830         data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1831         data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1832         line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1833         time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1834
1835         trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
1836                                       blink1, blink2, ilink1, ilink2);
1837
1838         IWL_ERR(priv, "Desc                               Time       "
1839                 "data1      data2      line\n");
1840         IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
1841                 desc_lookup(desc), desc, time, data1, data2, line);
1842         IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
1843         IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
1844                 ilink1, ilink2);
1845
1846 }
1847
1848 #define EVENT_START_OFFSET  (4 * sizeof(u32))
1849
1850 /**
1851  * iwl_print_event_log - Dump error event log to syslog
1852  *
1853  */
1854 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1855                                u32 num_events, u32 mode,
1856                                int pos, char **buf, size_t bufsz)
1857 {
1858         u32 i;
1859         u32 base;       /* SRAM byte address of event log header */
1860         u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1861         u32 ptr;        /* SRAM byte address of log data */
1862         u32 ev, time, data; /* event log data */
1863         unsigned long reg_flags;
1864
1865         if (num_events == 0)
1866                 return pos;
1867         if (priv->ucode_type == UCODE_INIT)
1868                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1869         else
1870                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1871
1872         if (mode == 0)
1873                 event_size = 2 * sizeof(u32);
1874         else
1875                 event_size = 3 * sizeof(u32);
1876
1877         ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1878
1879         /* Make sure device is powered up for SRAM reads */
1880         spin_lock_irqsave(&priv->reg_lock, reg_flags);
1881         iwl_grab_nic_access(priv);
1882
1883         /* Set starting address; reads will auto-increment */
1884         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
1885         rmb();
1886
1887         /* "time" is actually "data" for mode 0 (no timestamp).
1888         * place event id # at far right for easier visual parsing. */
1889         for (i = 0; i < num_events; i++) {
1890                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1891                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1892                 if (mode == 0) {
1893                         /* data, ev */
1894                         if (bufsz) {
1895                                 pos += scnprintf(*buf + pos, bufsz - pos,
1896                                                 "EVT_LOG:0x%08x:%04u\n",
1897                                                 time, ev);
1898                         } else {
1899                                 trace_iwlwifi_dev_ucode_event(priv, 0,
1900                                         time, ev);
1901                                 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1902                                         time, ev);
1903                         }
1904                 } else {
1905                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1906                         if (bufsz) {
1907                                 pos += scnprintf(*buf + pos, bufsz - pos,
1908                                                 "EVT_LOGT:%010u:0x%08x:%04u\n",
1909                                                  time, data, ev);
1910                         } else {
1911                                 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1912                                         time, data, ev);
1913                                 trace_iwlwifi_dev_ucode_event(priv, time,
1914                                         data, ev);
1915                         }
1916                 }
1917         }
1918
1919         /* Allow device to power down */
1920         iwl_release_nic_access(priv);
1921         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1922         return pos;
1923 }
1924
1925 /**
1926  * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1927  */
1928 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1929                                     u32 num_wraps, u32 next_entry,
1930                                     u32 size, u32 mode,
1931                                     int pos, char **buf, size_t bufsz)
1932 {
1933         /*
1934          * display the newest DEFAULT_LOG_ENTRIES entries
1935          * i.e the entries just before the next ont that uCode would fill.
1936          */
1937         if (num_wraps) {
1938                 if (next_entry < size) {
1939                         pos = iwl_print_event_log(priv,
1940                                                 capacity - (size - next_entry),
1941                                                 size - next_entry, mode,
1942                                                 pos, buf, bufsz);
1943                         pos = iwl_print_event_log(priv, 0,
1944                                                   next_entry, mode,
1945                                                   pos, buf, bufsz);
1946                 } else
1947                         pos = iwl_print_event_log(priv, next_entry - size,
1948                                                   size, mode, pos, buf, bufsz);
1949         } else {
1950                 if (next_entry < size) {
1951                         pos = iwl_print_event_log(priv, 0, next_entry,
1952                                                   mode, pos, buf, bufsz);
1953                 } else {
1954                         pos = iwl_print_event_log(priv, next_entry - size,
1955                                                   size, mode, pos, buf, bufsz);
1956                 }
1957         }
1958         return pos;
1959 }
1960
1961 /* For sanity check only.  Actual size is determined by uCode, typ. 512 */
1962 #define MAX_EVENT_LOG_SIZE (512)
1963
1964 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1965
1966 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
1967                             char **buf, bool display)
1968 {
1969         u32 base;       /* SRAM byte address of event log header */
1970         u32 capacity;   /* event log capacity in # entries */
1971         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
1972         u32 num_wraps;  /* # times uCode wrapped to top of log */
1973         u32 next_entry; /* index of next entry to be written by uCode */
1974         u32 size;       /* # entries that we'll print */
1975         int pos = 0;
1976         size_t bufsz = 0;
1977
1978         if (priv->ucode_type == UCODE_INIT)
1979                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1980         else
1981                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1982
1983         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1984                 IWL_ERR(priv,
1985                         "Invalid event log pointer 0x%08X for %s uCode\n",
1986                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1987                 return -EINVAL;
1988         }
1989
1990         /* event log header */
1991         capacity = iwl_read_targ_mem(priv, base);
1992         mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1993         num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1994         next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1995
1996         if (capacity > MAX_EVENT_LOG_SIZE) {
1997                 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
1998                         capacity, MAX_EVENT_LOG_SIZE);
1999                 capacity = MAX_EVENT_LOG_SIZE;
2000         }
2001
2002         if (next_entry > MAX_EVENT_LOG_SIZE) {
2003                 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
2004                         next_entry, MAX_EVENT_LOG_SIZE);
2005                 next_entry = MAX_EVENT_LOG_SIZE;
2006         }
2007
2008         size = num_wraps ? capacity : next_entry;
2009
2010         /* bail out if nothing in log */
2011         if (size == 0) {
2012                 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
2013                 return pos;
2014         }
2015
2016 #ifdef CONFIG_IWLWIFI_DEBUG
2017         if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
2018                 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2019                         ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2020 #else
2021         size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2022                 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2023 #endif
2024         IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
2025                 size);
2026
2027 #ifdef CONFIG_IWLWIFI_DEBUG
2028         if (display) {
2029                 if (full_log)
2030                         bufsz = capacity * 48;
2031                 else
2032                         bufsz = size * 48;
2033                 *buf = kmalloc(bufsz, GFP_KERNEL);
2034                 if (!*buf)
2035                         return -ENOMEM;
2036         }
2037         if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
2038                 /*
2039                  * if uCode has wrapped back to top of log,
2040                  * start at the oldest entry,
2041                  * i.e the next one that uCode would fill.
2042                  */
2043                 if (num_wraps)
2044                         pos = iwl_print_event_log(priv, next_entry,
2045                                                 capacity - next_entry, mode,
2046                                                 pos, buf, bufsz);
2047                 /* (then/else) start at top of log */
2048                 pos = iwl_print_event_log(priv, 0,
2049                                           next_entry, mode, pos, buf, bufsz);
2050         } else
2051                 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2052                                                 next_entry, size, mode,
2053                                                 pos, buf, bufsz);
2054 #else
2055         pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2056                                         next_entry, size, mode,
2057                                         pos, buf, bufsz);
2058 #endif
2059         return pos;
2060 }
2061
2062 /**
2063  * iwl_alive_start - called after REPLY_ALIVE notification received
2064  *                   from protocol/runtime uCode (initialization uCode's
2065  *                   Alive gets handled by iwl_init_alive_start()).
2066  */
2067 static void iwl_alive_start(struct iwl_priv *priv)
2068 {
2069         int ret = 0;
2070
2071         IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2072
2073         if (priv->card_alive.is_valid != UCODE_VALID_OK) {
2074                 /* We had an error bringing up the hardware, so take it
2075                  * all the way back down so we can try again */
2076                 IWL_DEBUG_INFO(priv, "Alive failed.\n");
2077                 goto restart;
2078         }
2079
2080         /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2081          * This is a paranoid check, because we would not have gotten the
2082          * "runtime" alive if code weren't properly loaded.  */
2083         if (iwl_verify_ucode(priv)) {
2084                 /* Runtime instruction load was bad;
2085                  * take it all the way back down so we can try again */
2086                 IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
2087                 goto restart;
2088         }
2089
2090         iwl_clear_stations_table(priv);
2091         ret = priv->cfg->ops->lib->alive_notify(priv);
2092         if (ret) {
2093                 IWL_WARN(priv,
2094                         "Could not complete ALIVE transition [ntf]: %d\n", ret);
2095                 goto restart;
2096         }
2097
2098         /* After the ALIVE response, we can send host commands to the uCode */
2099         set_bit(STATUS_ALIVE, &priv->status);
2100
2101         if (iwl_is_rfkill(priv))
2102                 return;
2103
2104         ieee80211_wake_queues(priv->hw);
2105
2106         priv->active_rate = IWL_RATES_MASK;
2107
2108         /* Configure Tx antenna selection based on H/W config */
2109         if (priv->cfg->ops->hcmd->set_tx_ant)
2110                 priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
2111
2112         if (iwl_is_associated(priv)) {
2113                 struct iwl_rxon_cmd *active_rxon =
2114                                 (struct iwl_rxon_cmd *)&priv->active_rxon;
2115                 /* apply any changes in staging */
2116                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2117                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2118         } else {
2119                 /* Initialize our rx_config data */
2120                 iwl_connection_init_rx_config(priv, priv->iw_mode);
2121
2122                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2123                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2124
2125                 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2126         }
2127
2128         /* Configure Bluetooth device coexistence support */
2129         iwl_send_bt_config(priv);
2130
2131         iwl_reset_run_time_calib(priv);
2132
2133         /* Configure the adapter for unassociated operation */
2134         iwlcore_commit_rxon(priv);
2135
2136         /* At this point, the NIC is initialized and operational */
2137         iwl_rf_kill_ct_config(priv);
2138
2139         iwl_leds_init(priv);
2140
2141         IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2142         set_bit(STATUS_READY, &priv->status);
2143         wake_up_interruptible(&priv->wait_command_queue);
2144
2145         iwl_power_update_mode(priv, true);
2146
2147         if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
2148                 iwl_set_mode(priv, priv->iw_mode);
2149
2150         return;
2151
2152  restart:
2153         queue_work(priv->workqueue, &priv->restart);
2154 }
2155
2156 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2157
2158 static void __iwl_down(struct iwl_priv *priv)
2159 {
2160         unsigned long flags;
2161         int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
2162
2163         IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2164
2165         if (!exit_pending)
2166                 set_bit(STATUS_EXIT_PENDING, &priv->status);
2167
2168         iwl_clear_stations_table(priv);
2169
2170         /* Unblock any waiting calls */
2171         wake_up_interruptible_all(&priv->wait_command_queue);
2172
2173         /* Wipe out the EXIT_PENDING status bit if we are not actually
2174          * exiting the module */
2175         if (!exit_pending)
2176                 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2177
2178         /* stop and reset the on-board processor */
2179         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2180
2181         /* tell the device to stop sending interrupts */
2182         spin_lock_irqsave(&priv->lock, flags);
2183         iwl_disable_interrupts(priv);
2184         spin_unlock_irqrestore(&priv->lock, flags);
2185         iwl_synchronize_irq(priv);
2186
2187         if (priv->mac80211_registered)
2188                 ieee80211_stop_queues(priv->hw);
2189
2190         /* If we have not previously called iwl_init() then
2191          * clear all bits but the RF Kill bit and return */
2192         if (!iwl_is_init(priv)) {
2193                 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2194                                         STATUS_RF_KILL_HW |
2195                                test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2196                                         STATUS_GEO_CONFIGURED |
2197                                test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2198                                         STATUS_EXIT_PENDING;
2199                 goto exit;
2200         }
2201
2202         /* ...otherwise clear out all the status bits but the RF Kill
2203          * bit and continue taking the NIC down. */
2204         priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2205                                 STATUS_RF_KILL_HW |
2206                         test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2207                                 STATUS_GEO_CONFIGURED |
2208                         test_bit(STATUS_FW_ERROR, &priv->status) <<
2209                                 STATUS_FW_ERROR |
2210                        test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2211                                 STATUS_EXIT_PENDING;
2212
2213         /* device going down, Stop using ICT table */
2214         iwl_disable_ict(priv);
2215
2216         iwl_txq_ctx_stop(priv);
2217         iwl_rxq_stop(priv);
2218
2219         /* Power-down device's busmaster DMA clocks */
2220         iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2221         udelay(5);
2222
2223         /* Make sure (redundant) we've released our request to stay awake */
2224         iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2225
2226         /* Stop the device, and put it in low power state */
2227         priv->cfg->ops->lib->apm_ops.stop(priv);
2228
2229  exit:
2230         memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
2231
2232         if (priv->ibss_beacon)
2233                 dev_kfree_skb(priv->ibss_beacon);
2234         priv->ibss_beacon = NULL;
2235
2236         /* clear out any free frames */
2237         iwl_clear_free_frames(priv);
2238 }
2239
2240 static void iwl_down(struct iwl_priv *priv)
2241 {
2242         mutex_lock(&priv->mutex);
2243         __iwl_down(priv);
2244         mutex_unlock(&priv->mutex);
2245
2246         iwl_cancel_deferred_work(priv);
2247 }
2248
2249 #define HW_READY_TIMEOUT (50)
2250
2251 static int iwl_set_hw_ready(struct iwl_priv *priv)
2252 {
2253         int ret = 0;
2254
2255         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2256                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2257
2258         /* See if we got it */
2259         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2260                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2261                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2262                                 HW_READY_TIMEOUT);
2263         if (ret != -ETIMEDOUT)
2264                 priv->hw_ready = true;
2265         else
2266                 priv->hw_ready = false;
2267
2268         IWL_DEBUG_INFO(priv, "hardware %s\n",
2269                       (priv->hw_ready == 1) ? "ready" : "not ready");
2270         return ret;
2271 }
2272
2273 static int iwl_prepare_card_hw(struct iwl_priv *priv)
2274 {
2275         int ret = 0;
2276
2277         IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
2278
2279         ret = iwl_set_hw_ready(priv);
2280         if (priv->hw_ready)
2281                 return ret;
2282
2283         /* If HW is not ready, prepare the conditions to check again */
2284         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2285                         CSR_HW_IF_CONFIG_REG_PREPARE);
2286
2287         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2288                         ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2289                         CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2290
2291         /* HW should be ready by now, check again. */
2292         if (ret != -ETIMEDOUT)
2293                 iwl_set_hw_ready(priv);
2294
2295         return ret;
2296 }
2297
2298 #define MAX_HW_RESTARTS 5
2299
2300 static int __iwl_up(struct iwl_priv *priv)
2301 {
2302         int i;
2303         int ret;
2304
2305         if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2306                 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2307                 return -EIO;
2308         }
2309
2310         if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
2311                 IWL_ERR(priv, "ucode not available for device bringup\n");
2312                 return -EIO;
2313         }
2314
2315         iwl_prepare_card_hw(priv);
2316
2317         if (!priv->hw_ready) {
2318                 IWL_WARN(priv, "Exit HW not ready\n");
2319                 return -EIO;
2320         }
2321
2322         /* If platform's RF_KILL switch is NOT set to KILL */
2323         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2324                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
2325         else
2326                 set_bit(STATUS_RF_KILL_HW, &priv->status);
2327
2328         if (iwl_is_rfkill(priv)) {
2329                 wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
2330
2331                 iwl_enable_interrupts(priv);
2332                 IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
2333                 return 0;
2334         }
2335
2336         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2337
2338         ret = iwl_hw_nic_init(priv);
2339         if (ret) {
2340                 IWL_ERR(priv, "Unable to init nic\n");
2341                 return ret;
2342         }
2343
2344         /* make sure rfkill handshake bits are cleared */
2345         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2346         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
2347                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2348
2349         /* clear (again), then enable host interrupts */
2350         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2351         iwl_enable_interrupts(priv);
2352
2353         /* really make sure rfkill handshake bits are cleared */
2354         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2355         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2356
2357         /* Copy original ucode data image from disk into backup cache.
2358          * This will be used to initialize the on-board processor's
2359          * data SRAM for a clean start when the runtime program first loads. */
2360         memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
2361                priv->ucode_data.len);
2362
2363         for (i = 0; i < MAX_HW_RESTARTS; i++) {
2364
2365                 iwl_clear_stations_table(priv);
2366
2367                 /* load bootstrap state machine,
2368                  * load bootstrap program into processor's memory,
2369                  * prepare to load the "initialize" uCode */
2370                 ret = priv->cfg->ops->lib->load_ucode(priv);
2371
2372                 if (ret) {
2373                         IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
2374                                 ret);
2375                         continue;
2376                 }
2377
2378                 /* start card; "initialize" will load runtime ucode */
2379                 iwl_nic_start(priv);
2380
2381                 IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
2382
2383                 return 0;
2384         }
2385
2386         set_bit(STATUS_EXIT_PENDING, &priv->status);
2387         __iwl_down(priv);
2388         clear_bit(STATUS_EXIT_PENDING, &priv->status);
2389
2390         /* tried to restart and config the device for as long as our
2391          * patience could withstand */
2392         IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
2393         return -EIO;
2394 }
2395
2396
2397 /*****************************************************************************
2398  *
2399  * Workqueue callbacks
2400  *
2401  *****************************************************************************/
2402
2403 static void iwl_bg_init_alive_start(struct work_struct *data)
2404 {
2405         struct iwl_priv *priv =
2406             container_of(data, struct iwl_priv, init_alive_start.work);
2407
2408         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2409                 return;
2410
2411         mutex_lock(&priv->mutex);
2412         priv->cfg->ops->lib->init_alive_start(priv);
2413         mutex_unlock(&priv->mutex);
2414 }
2415
2416 static void iwl_bg_alive_start(struct work_struct *data)
2417 {
2418         struct iwl_priv *priv =
2419             container_of(data, struct iwl_priv, alive_start.work);
2420
2421         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2422                 return;
2423
2424         /* enable dram interrupt */
2425         iwl_reset_ict(priv);
2426
2427         mutex_lock(&priv->mutex);
2428         iwl_alive_start(priv);
2429         mutex_unlock(&priv->mutex);
2430 }
2431
2432 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2433 {
2434         struct iwl_priv *priv = container_of(work, struct iwl_priv,
2435                         run_time_calib_work);
2436
2437         mutex_lock(&priv->mutex);
2438
2439         if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2440             test_bit(STATUS_SCANNING, &priv->status)) {
2441                 mutex_unlock(&priv->mutex);
2442                 return;
2443         }
2444
2445         if (priv->start_calib) {
2446                 iwl_chain_noise_calibration(priv, &priv->statistics);
2447
2448                 iwl_sensitivity_calibration(priv, &priv->statistics);
2449         }
2450
2451         mutex_unlock(&priv->mutex);
2452         return;
2453 }
2454
2455 static void iwl_bg_restart(struct work_struct *data)
2456 {
2457         struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
2458
2459         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2460                 return;
2461
2462         if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
2463                 mutex_lock(&priv->mutex);
2464                 priv->vif = NULL;
2465                 priv->is_open = 0;
2466                 mutex_unlock(&priv->mutex);
2467                 iwl_down(priv);
2468                 ieee80211_restart_hw(priv->hw);
2469         } else {
2470                 iwl_down(priv);
2471
2472                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2473                         return;
2474
2475                 mutex_lock(&priv->mutex);
2476                 __iwl_up(priv);
2477                 mutex_unlock(&priv->mutex);
2478         }
2479 }
2480
2481 static void iwl_bg_rx_replenish(struct work_struct *data)
2482 {
2483         struct iwl_priv *priv =
2484             container_of(data, struct iwl_priv, rx_replenish);
2485
2486         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2487                 return;
2488
2489         mutex_lock(&priv->mutex);
2490         iwl_rx_replenish(priv);
2491         mutex_unlock(&priv->mutex);
2492 }
2493
2494 #define IWL_DELAY_NEXT_SCAN (HZ*2)
2495
2496 void iwl_post_associate(struct iwl_priv *priv)
2497 {
2498         struct ieee80211_conf *conf = NULL;
2499         int ret = 0;
2500         unsigned long flags;
2501
2502         if (priv->iw_mode == NL80211_IFTYPE_AP) {
2503                 IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
2504                 return;
2505         }
2506
2507         IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
2508                         priv->assoc_id, priv->active_rxon.bssid_addr);
2509
2510
2511         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2512                 return;
2513
2514
2515         if (!priv->vif || !priv->is_open)
2516                 return;
2517
2518         iwl_scan_cancel_timeout(priv, 200);
2519
2520         conf = ieee80211_get_hw_conf(priv->hw);
2521
2522         priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2523         iwlcore_commit_rxon(priv);
2524
2525         iwl_setup_rxon_timing(priv);
2526         ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2527                               sizeof(priv->rxon_timing), &priv->rxon_timing);
2528         if (ret)
2529                 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2530                             "Attempting to continue.\n");
2531
2532         priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2533
2534         iwl_set_rxon_ht(priv, &priv->current_ht_config);
2535
2536         if (priv->cfg->ops->hcmd->set_rxon_chain)
2537                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2538
2539         priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2540
2541         IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
2542                         priv->assoc_id, priv->beacon_int);
2543
2544         if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2545                 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2546         else
2547                 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2548
2549         if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2550                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2551                         priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2552                 else
2553                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2554
2555                 if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2556                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2557
2558         }
2559
2560         iwlcore_commit_rxon(priv);
2561
2562         switch (priv->iw_mode) {
2563         case NL80211_IFTYPE_STATION:
2564                 break;
2565
2566         case NL80211_IFTYPE_ADHOC:
2567
2568                 /* assume default assoc id */
2569                 priv->assoc_id = 1;
2570
2571                 iwl_rxon_add_station(priv, priv->bssid, 0);
2572                 iwl_send_beacon_cmd(priv);
2573
2574                 break;
2575
2576         default:
2577                 IWL_ERR(priv, "%s Should not be called in %d mode\n",
2578                           __func__, priv->iw_mode);
2579                 break;
2580         }
2581
2582         if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2583                 priv->assoc_station_added = 1;
2584
2585         spin_lock_irqsave(&priv->lock, flags);
2586         iwl_activate_qos(priv, 0);
2587         spin_unlock_irqrestore(&priv->lock, flags);
2588
2589         /* the chain noise calibration will enabled PM upon completion
2590          * If chain noise has already been run, then we need to enable
2591          * power management here */
2592         if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
2593                 iwl_power_update_mode(priv, false);
2594
2595         /* Enable Rx differential gain and sensitivity calibrations */
2596         iwl_chain_noise_reset(priv);
2597         priv->start_calib = 1;
2598
2599 }
2600
2601 /*****************************************************************************
2602  *
2603  * mac80211 entry point functions
2604  *
2605  *****************************************************************************/
2606
2607 #define UCODE_READY_TIMEOUT     (4 * HZ)
2608
2609 /*
2610  * Not a mac80211 entry point function, but it fits in with all the
2611  * other mac80211 functions grouped here.
2612  */
2613 static int iwl_mac_setup_register(struct iwl_priv *priv)
2614 {
2615         int ret;
2616         struct ieee80211_hw *hw = priv->hw;
2617         hw->rate_control_algorithm = "iwl-agn-rs";
2618
2619         /* Tell mac80211 our characteristics */
2620         hw->flags = IEEE80211_HW_SIGNAL_DBM |
2621                     IEEE80211_HW_NOISE_DBM |
2622                     IEEE80211_HW_AMPDU_AGGREGATION |
2623                     IEEE80211_HW_SPECTRUM_MGMT;
2624
2625         if (!priv->cfg->broken_powersave)
2626                 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2627                              IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2628
2629         if (priv->cfg->sku & IWL_SKU_N)
2630                 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2631                              IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2632
2633         hw->sta_data_size = sizeof(struct iwl_station_priv);
2634         hw->wiphy->interface_modes =
2635                 BIT(NL80211_IFTYPE_STATION) |
2636                 BIT(NL80211_IFTYPE_ADHOC);
2637
2638         hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
2639                             WIPHY_FLAG_DISABLE_BEACON_HINTS;
2640
2641         /*
2642          * For now, disable PS by default because it affects
2643          * RX performance significantly.
2644          */
2645         hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2646
2647         hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
2648         /* we create the 802.11 header and a zero-length SSID element */
2649         hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
2650
2651         /* Default value; 4 EDCA QOS priorities */
2652         hw->queues = 4;
2653
2654         hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2655
2656         if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2657                 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2658                         &priv->bands[IEEE80211_BAND_2GHZ];
2659         if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2660                 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2661                         &priv->bands[IEEE80211_BAND_5GHZ];
2662
2663         ret = ieee80211_register_hw(priv->hw);
2664         if (ret) {
2665                 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2666                 return ret;
2667         }
2668         priv->mac80211_registered = 1;
2669
2670         return 0;
2671 }
2672
2673
2674 static int iwl_mac_start(struct ieee80211_hw *hw)
2675 {
2676         struct iwl_priv *priv = hw->priv;
2677         int ret;
2678
2679         IWL_DEBUG_MAC80211(priv, "enter\n");
2680
2681         /* we should be verifying the device is ready to be opened */
2682         mutex_lock(&priv->mutex);
2683         ret = __iwl_up(priv);
2684         mutex_unlock(&priv->mutex);
2685
2686         if (ret)
2687                 return ret;
2688
2689         if (iwl_is_rfkill(priv))
2690                 goto out;
2691
2692         IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2693
2694         /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
2695          * mac80211 will not be run successfully. */
2696         ret = wait_event_interruptible_timeout(priv->wait_command_queue,
2697                         test_bit(STATUS_READY, &priv->status),
2698                         UCODE_READY_TIMEOUT);
2699         if (!ret) {
2700                 if (!test_bit(STATUS_READY, &priv->status)) {
2701                         IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
2702                                 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2703                         return -ETIMEDOUT;
2704                 }
2705         }
2706
2707         iwl_led_start(priv);
2708
2709 out:
2710         priv->is_open = 1;
2711         IWL_DEBUG_MAC80211(priv, "leave\n");
2712         return 0;
2713 }
2714
2715 static void iwl_mac_stop(struct ieee80211_hw *hw)
2716 {
2717         struct iwl_priv *priv = hw->priv;
2718
2719         IWL_DEBUG_MAC80211(priv, "enter\n");
2720
2721         if (!priv->is_open)
2722                 return;
2723
2724         priv->is_open = 0;
2725
2726         if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
2727                 /* stop mac, cancel any scan request and clear
2728                  * RXON_FILTER_ASSOC_MSK BIT
2729                  */
2730                 mutex_lock(&priv->mutex);
2731                 iwl_scan_cancel_timeout(priv, 100);
2732                 mutex_unlock(&priv->mutex);
2733         }
2734
2735         iwl_down(priv);
2736
2737         flush_workqueue(priv->workqueue);
2738
2739         /* enable interrupts again in order to receive rfkill changes */
2740         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2741         iwl_enable_interrupts(priv);
2742
2743         IWL_DEBUG_MAC80211(priv, "leave\n");
2744 }
2745
2746 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2747 {
2748         struct iwl_priv *priv = hw->priv;
2749
2750         IWL_DEBUG_MACDUMP(priv, "enter\n");
2751
2752         IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2753                      ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2754
2755         if (iwl_tx_skb(priv, skb))
2756                 dev_kfree_skb_any(skb);
2757
2758         IWL_DEBUG_MACDUMP(priv, "leave\n");
2759         return NETDEV_TX_OK;
2760 }
2761
2762 void iwl_config_ap(struct iwl_priv *priv)
2763 {
2764         int ret = 0;
2765         unsigned long flags;
2766
2767         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2768                 return;
2769
2770         /* The following should be done only at AP bring up */
2771         if (!iwl_is_associated(priv)) {
2772
2773                 /* RXON - unassoc (to set timing command) */
2774                 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2775                 iwlcore_commit_rxon(priv);
2776
2777                 /* RXON Timing */
2778                 iwl_setup_rxon_timing(priv);
2779                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2780                                 sizeof(priv->rxon_timing), &priv->rxon_timing);
2781                 if (ret)
2782                         IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2783                                         "Attempting to continue.\n");
2784
2785                 /* AP has all antennas */
2786                 priv->chain_noise_data.active_chains =
2787                         priv->hw_params.valid_rx_ant;
2788                 iwl_set_rxon_ht(priv, &priv->current_ht_config);
2789                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2790                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2791
2792                 /* FIXME: what should be the assoc_id for AP? */
2793                 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2794                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2795                         priv->staging_rxon.flags |=
2796                                 RXON_FLG_SHORT_PREAMBLE_MSK;
2797                 else
2798                         priv->staging_rxon.flags &=
2799                                 ~RXON_FLG_SHORT_PREAMBLE_MSK;
2800
2801                 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2802                         if (priv->assoc_capability &
2803                                 WLAN_CAPABILITY_SHORT_SLOT_TIME)
2804                                 priv->staging_rxon.flags |=
2805                                         RXON_FLG_SHORT_SLOT_MSK;
2806                         else
2807                                 priv->staging_rxon.flags &=
2808                                         ~RXON_FLG_SHORT_SLOT_MSK;
2809
2810                         if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2811                                 priv->staging_rxon.flags &=
2812                                         ~RXON_FLG_SHORT_SLOT_MSK;
2813                 }
2814                 /* restore RXON assoc */
2815                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2816                 iwlcore_commit_rxon(priv);
2817                 iwl_reset_qos(priv);
2818                 spin_lock_irqsave(&priv->lock, flags);
2819                 iwl_activate_qos(priv, 1);
2820                 spin_unlock_irqrestore(&priv->lock, flags);
2821                 iwl_add_bcast_station(priv);
2822         }
2823         iwl_send_beacon_cmd(priv);
2824
2825         /* FIXME - we need to add code here to detect a totally new
2826          * configuration, reset the AP, unassoc, rxon timing, assoc,
2827          * clear sta table, add BCAST sta... */
2828 }
2829
2830 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
2831                                     struct ieee80211_vif *vif,
2832                                     struct ieee80211_key_conf *keyconf,
2833                                     struct ieee80211_sta *sta,
2834                                     u32 iv32, u16 *phase1key)
2835 {
2836
2837         struct iwl_priv *priv = hw->priv;
2838         IWL_DEBUG_MAC80211(priv, "enter\n");
2839
2840         iwl_update_tkip_key(priv, keyconf,
2841                             sta ? sta->addr : iwl_bcast_addr,
2842                             iv32, phase1key);
2843
2844         IWL_DEBUG_MAC80211(priv, "leave\n");
2845 }
2846
2847 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2848                            struct ieee80211_vif *vif,
2849                            struct ieee80211_sta *sta,
2850                            struct ieee80211_key_conf *key)
2851 {
2852         struct iwl_priv *priv = hw->priv;
2853         const u8 *addr;
2854         int ret;
2855         u8 sta_id;
2856         bool is_default_wep_key = false;
2857
2858         IWL_DEBUG_MAC80211(priv, "enter\n");
2859
2860         if (priv->cfg->mod_params->sw_crypto) {
2861                 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2862                 return -EOPNOTSUPP;
2863         }
2864         addr = sta ? sta->addr : iwl_bcast_addr;
2865         sta_id = iwl_find_station(priv, addr);
2866         if (sta_id == IWL_INVALID_STATION) {
2867                 IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
2868                                    addr);
2869                 return -EINVAL;
2870
2871         }
2872
2873         mutex_lock(&priv->mutex);
2874         iwl_scan_cancel_timeout(priv, 100);
2875         mutex_unlock(&priv->mutex);
2876
2877         /* If we are getting WEP group key and we didn't receive any key mapping
2878          * so far, we are in legacy wep mode (group key only), otherwise we are
2879          * in 1X mode.
2880          * In legacy wep mode, we use another host command to the uCode */
2881         if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id &&
2882                 priv->iw_mode != NL80211_IFTYPE_AP) {
2883                 if (cmd == SET_KEY)
2884                         is_default_wep_key = !priv->key_mapping_key;
2885                 else
2886                         is_default_wep_key =
2887                                         (key->hw_key_idx == HW_KEY_DEFAULT);
2888         }
2889
2890         switch (cmd) {
2891         case SET_KEY:
2892                 if (is_default_wep_key)
2893                         ret = iwl_set_default_wep_key(priv, key);
2894                 else
2895                         ret = iwl_set_dynamic_key(priv, key, sta_id);
2896
2897                 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2898                 break;
2899         case DISABLE_KEY:
2900                 if (is_default_wep_key)
2901                         ret = iwl_remove_default_wep_key(priv, key);
2902                 else
2903                         ret = iwl_remove_dynamic_key(priv, key, sta_id);
2904
2905                 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2906                 break;
2907         default:
2908                 ret = -EINVAL;
2909         }
2910
2911         IWL_DEBUG_MAC80211(priv, "leave\n");
2912
2913         return ret;
2914 }
2915
2916 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
2917                                 struct ieee80211_vif *vif,
2918                              enum ieee80211_ampdu_mlme_action action,
2919                              struct ieee80211_sta *sta, u16 tid, u16 *ssn)
2920 {
2921         struct iwl_priv *priv = hw->priv;
2922         int ret;
2923
2924         IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2925                      sta->addr, tid);
2926
2927         if (!(priv->cfg->sku & IWL_SKU_N))
2928                 return -EACCES;
2929
2930         switch (action) {
2931         case IEEE80211_AMPDU_RX_START:
2932                 IWL_DEBUG_HT(priv, "start Rx\n");
2933                 return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
2934         case IEEE80211_AMPDU_RX_STOP:
2935                 IWL_DEBUG_HT(priv, "stop Rx\n");
2936                 ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid);
2937                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2938                         return 0;
2939                 else
2940                         return ret;
2941         case IEEE80211_AMPDU_TX_START:
2942                 IWL_DEBUG_HT(priv, "start Tx\n");
2943                 return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
2944         case IEEE80211_AMPDU_TX_STOP:
2945                 IWL_DEBUG_HT(priv, "stop Tx\n");
2946                 ret = iwl_tx_agg_stop(priv, sta->addr, tid);
2947                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2948                         return 0;
2949                 else
2950                         return ret;
2951         case IEEE80211_AMPDU_TX_OPERATIONAL:
2952                 /* do nothing */
2953                 return -EOPNOTSUPP;
2954         default:
2955                 IWL_DEBUG_HT(priv, "unknown\n");
2956                 return -EINVAL;
2957                 break;
2958         }
2959         return 0;
2960 }
2961
2962 static int iwl_mac_get_stats(struct ieee80211_hw *hw,
2963                              struct ieee80211_low_level_stats *stats)
2964 {
2965         struct iwl_priv *priv = hw->priv;
2966
2967         priv = hw->priv;
2968         IWL_DEBUG_MAC80211(priv, "enter\n");
2969         IWL_DEBUG_MAC80211(priv, "leave\n");
2970
2971         return 0;
2972 }
2973
2974 static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
2975                                struct ieee80211_vif *vif,
2976                                enum sta_notify_cmd cmd,
2977                                struct ieee80211_sta *sta)
2978 {
2979         struct iwl_priv *priv = hw->priv;
2980         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2981         int sta_id;
2982
2983         /*
2984          * TODO: We really should use this callback to
2985          *       actually maintain the station table in
2986          *       the device.
2987          */
2988
2989         switch (cmd) {
2990         case STA_NOTIFY_ADD:
2991                 atomic_set(&sta_priv->pending_frames, 0);
2992                 if (vif->type == NL80211_IFTYPE_AP)
2993                         sta_priv->client = true;
2994                 break;
2995         case STA_NOTIFY_SLEEP:
2996                 WARN_ON(!sta_priv->client);
2997                 sta_priv->asleep = true;
2998                 if (atomic_read(&sta_priv->pending_frames) > 0)
2999                         ieee80211_sta_block_awake(hw, sta, true);
3000                 break;
3001         case STA_NOTIFY_AWAKE:
3002                 WARN_ON(!sta_priv->client);
3003                 if (!sta_priv->asleep)
3004                         break;
3005                 sta_priv->asleep = false;
3006                 sta_id = iwl_find_station(priv, sta->addr);
3007                 if (sta_id != IWL_INVALID_STATION)
3008                         iwl_sta_modify_ps_wake(priv, sta_id);
3009                 break;
3010         default:
3011                 break;
3012         }
3013 }
3014
3015 /*****************************************************************************
3016  *
3017  * sysfs attributes
3018  *
3019  *****************************************************************************/
3020
3021 #ifdef CONFIG_IWLWIFI_DEBUG
3022
3023 /*
3024  * The following adds a new attribute to the sysfs representation
3025  * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
3026  * used for controlling the debug level.
3027  *
3028  * See the level definitions in iwl for details.
3029  *
3030  * The debug_level being managed using sysfs below is a per device debug
3031  * level that is used instead of the global debug level if it (the per
3032  * device debug level) is set.
3033  */
3034 static ssize_t show_debug_level(struct device *d,
3035                                 struct device_attribute *attr, char *buf)
3036 {
3037         struct iwl_priv *priv = dev_get_drvdata(d);
3038         return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
3039 }
3040 static ssize_t store_debug_level(struct device *d,
3041                                 struct device_attribute *attr,
3042                                  const char *buf, size_t count)
3043 {
3044         struct iwl_priv *priv = dev_get_drvdata(d);
3045         unsigned long val;
3046         int ret;
3047
3048         ret = strict_strtoul(buf, 0, &val);
3049         if (ret)
3050                 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
3051         else {
3052                 priv->debug_level = val;
3053                 if (iwl_alloc_traffic_mem(priv))
3054                         IWL_ERR(priv,
3055                                 "Not enough memory to generate traffic log\n");
3056         }
3057         return strnlen(buf, count);
3058 }
3059
3060 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
3061                         show_debug_level, store_debug_level);
3062
3063
3064 #endif /* CONFIG_IWLWIFI_DEBUG */
3065
3066
3067 static ssize_t show_temperature(struct device *d,
3068                                 struct device_attribute *attr, char *buf)
3069 {
3070         struct iwl_priv *priv = dev_get_drvdata(d);
3071
3072         if (!iwl_is_alive(priv))
3073                 return -EAGAIN;
3074
3075         return sprintf(buf, "%d\n", priv->temperature);
3076 }
3077
3078 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
3079
3080 static ssize_t show_tx_power(struct device *d,
3081                              struct device_attribute *attr, char *buf)
3082 {
3083         struct iwl_priv *priv = dev_get_drvdata(d);
3084
3085         if (!iwl_is_ready_rf(priv))
3086                 return sprintf(buf, "off\n");
3087         else
3088                 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
3089 }
3090
3091 static ssize_t store_tx_power(struct device *d,
3092                               struct device_attribute *attr,
3093                               const char *buf, size_t count)
3094 {
3095         struct iwl_priv *priv = dev_get_drvdata(d);
3096         unsigned long val;
3097         int ret;
3098
3099         ret = strict_strtoul(buf, 10, &val);
3100         if (ret)
3101                 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
3102         else {
3103                 ret = iwl_set_tx_power(priv, val, false);
3104                 if (ret)
3105                         IWL_ERR(priv, "failed setting tx power (0x%d).\n",
3106                                 ret);
3107                 else
3108                         ret = count;
3109         }
3110         return ret;
3111 }
3112
3113 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
3114
3115 static ssize_t show_flags(struct device *d,
3116                           struct device_attribute *attr, char *buf)
3117 {
3118         struct iwl_priv *priv = dev_get_drvdata(d);
3119
3120         return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
3121 }
3122
3123 static ssize_t store_flags(struct device *d,
3124                            struct device_attribute *attr,
3125                            const char *buf, size_t count)
3126 {
3127         struct iwl_priv *priv = dev_get_drvdata(d);
3128         unsigned long val;
3129         u32 flags;
3130         int ret = strict_strtoul(buf, 0, &val);
3131         if (ret)
3132                 return ret;
3133         flags = (u32)val;
3134
3135         mutex_lock(&priv->mutex);
3136         if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
3137                 /* Cancel any currently running scans... */
3138                 if (iwl_scan_cancel_timeout(priv, 100))
3139                         IWL_WARN(priv, "Could not cancel scan.\n");
3140                 else {
3141                         IWL_DEBUG_INFO(priv, "Commit rxon.flags = 0x%04X\n", flags);
3142                         priv->staging_rxon.flags = cpu_to_le32(flags);
3143                         iwlcore_commit_rxon(priv);
3144                 }
3145         }
3146         mutex_unlock(&priv->mutex);
3147
3148         return count;
3149 }
3150
3151 static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
3152
3153 static ssize_t show_filter_flags(struct device *d,
3154                                  struct device_attribute *attr, char *buf)
3155 {
3156         struct iwl_priv *priv = dev_get_drvdata(d);
3157
3158         return sprintf(buf, "0x%04X\n",
3159                 le32_to_cpu(priv->active_rxon.filter_flags));
3160 }
3161
3162 static ssize_t store_filter_flags(struct device *d,
3163                                   struct device_attribute *attr,
3164                                   const char *buf, size_t count)
3165 {
3166         struct iwl_priv *priv = dev_get_drvdata(d);
3167         unsigned long val;
3168         u32 filter_flags;
3169         int ret = strict_strtoul(buf, 0, &val);
3170         if (ret)
3171                 return ret;
3172         filter_flags = (u32)val;
3173
3174         mutex_lock(&priv->mutex);
3175         if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
3176                 /* Cancel any currently running scans... */
3177                 if (iwl_scan_cancel_timeout(priv, 100))
3178                         IWL_WARN(priv, "Could not cancel scan.\n");
3179                 else {
3180                         IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
3181                                        "0x%04X\n", filter_flags);
3182                         priv->staging_rxon.filter_flags =
3183                                 cpu_to_le32(filter_flags);
3184                         iwlcore_commit_rxon(priv);
3185                 }
3186         }
3187         mutex_unlock(&priv->mutex);
3188
3189         return count;
3190 }
3191
3192 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
3193                    store_filter_flags);
3194
3195
3196 static ssize_t show_statistics(struct device *d,
3197                                struct device_attribute *attr, char *buf)
3198 {
3199         struct iwl_priv *priv = dev_get_drvdata(d);
3200         u32 size = sizeof(struct iwl_notif_statistics);
3201         u32 len = 0, ofs = 0;
3202         u8 *data = (u8 *)&priv->statistics;
3203         int rc = 0;
3204
3205         if (!iwl_is_alive(priv))
3206                 return -EAGAIN;
3207
3208         mutex_lock(&priv->mutex);
3209         rc = iwl_send_statistics_request(priv, CMD_SYNC, false);
3210         mutex_unlock(&priv->mutex);
3211
3212         if (rc) {
3213                 len = sprintf(buf,
3214                               "Error sending statistics request: 0x%08X\n", rc);
3215                 return len;
3216         }
3217
3218         while (size && (PAGE_SIZE - len)) {
3219                 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3220                                    PAGE_SIZE - len, 1);
3221                 len = strlen(buf);
3222                 if (PAGE_SIZE - len)
3223                         buf[len++] = '\n';
3224
3225                 ofs += 16;
3226                 size -= min(size, 16U);
3227         }
3228
3229         return len;
3230 }
3231
3232 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
3233
3234 static ssize_t show_rts_ht_protection(struct device *d,
3235                              struct device_attribute *attr, char *buf)
3236 {
3237         struct iwl_priv *priv = dev_get_drvdata(d);
3238
3239         return sprintf(buf, "%s\n",
3240                 priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
3241 }
3242
3243 static ssize_t store_rts_ht_protection(struct device *d,
3244                               struct device_attribute *attr,
3245                               const char *buf, size_t count)
3246 {
3247         struct iwl_priv *priv = dev_get_drvdata(d);
3248         unsigned long val;
3249         int ret;
3250
3251         ret = strict_strtoul(buf, 10, &val);
3252         if (ret)
3253                 IWL_INFO(priv, "Input is not in decimal form.\n");
3254         else {
3255                 if (!iwl_is_associated(priv))
3256                         priv->cfg->use_rts_for_ht = val ? true : false;
3257                 else
3258                         IWL_ERR(priv, "Sta associated with AP - "
3259                                 "Change protection mechanism is not allowed\n");
3260                 ret = count;
3261         }
3262         return ret;
3263 }
3264
3265 static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
3266                         show_rts_ht_protection, store_rts_ht_protection);
3267
3268
3269 /*****************************************************************************
3270  *
3271  * driver setup and teardown
3272  *
3273  *****************************************************************************/
3274
3275 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3276 {
3277         priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3278
3279         init_waitqueue_head(&priv->wait_command_queue);
3280
3281         INIT_WORK(&priv->restart, iwl_bg_restart);
3282         INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3283         INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3284         INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3285         INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
3286         INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
3287
3288         iwl_setup_scan_deferred_work(priv);
3289
3290         if (priv->cfg->ops->lib->setup_deferred_work)
3291                 priv->cfg->ops->lib->setup_deferred_work(priv);
3292
3293         init_timer(&priv->statistics_periodic);
3294         priv->statistics_periodic.data = (unsigned long)priv;
3295         priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3296
3297         init_timer(&priv->ucode_trace);
3298         priv->ucode_trace.data = (unsigned long)priv;
3299         priv->ucode_trace.function = iwl_bg_ucode_trace;
3300
3301         if (!priv->cfg->use_isr_legacy)
3302                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3303                         iwl_irq_tasklet, (unsigned long)priv);
3304         else
3305                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3306                         iwl_irq_tasklet_legacy, (unsigned long)priv);
3307 }
3308
3309 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3310 {
3311         if (priv->cfg->ops->lib->cancel_deferred_work)
3312                 priv->cfg->ops->lib->cancel_deferred_work(priv);
3313
3314         cancel_delayed_work_sync(&priv->init_alive_start);
3315         cancel_delayed_work(&priv->scan_check);
3316         cancel_delayed_work(&priv->alive_start);
3317         cancel_work_sync(&priv->beacon_update);
3318         del_timer_sync(&priv->statistics_periodic);
3319         del_timer_sync(&priv->ucode_trace);
3320 }
3321
3322 static void iwl_init_hw_rates(struct iwl_priv *priv,
3323                               struct ieee80211_rate *rates)
3324 {
3325         int i;
3326
3327         for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3328                 rates[i].bitrate = iwl_rates[i].ieee * 5;
3329                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3330                 rates[i].hw_value_short = i;
3331                 rates[i].flags = 0;
3332                 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3333                         /*
3334                          * If CCK != 1M then set short preamble rate flag.
3335                          */
3336                         rates[i].flags |=
3337                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3338                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
3339                 }
3340         }
3341 }
3342
3343 static int iwl_init_drv(struct iwl_priv *priv)
3344 {
3345         int ret;
3346
3347         priv->ibss_beacon = NULL;
3348
3349         spin_lock_init(&priv->sta_lock);
3350         spin_lock_init(&priv->hcmd_lock);
3351
3352         INIT_LIST_HEAD(&priv->free_frames);
3353
3354         mutex_init(&priv->mutex);
3355         mutex_init(&priv->sync_cmd_mutex);
3356
3357         /* Clear the driver's (not device's) station table */
3358         iwl_clear_stations_table(priv);
3359
3360         priv->ieee_channels = NULL;
3361         priv->ieee_rates = NULL;
3362         priv->band = IEEE80211_BAND_2GHZ;
3363
3364         priv->iw_mode = NL80211_IFTYPE_STATION;
3365         priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3366         priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3367
3368         /* initialize force reset */
3369         priv->force_reset[IWL_RF_RESET].reset_duration =
3370                 IWL_DELAY_NEXT_FORCE_RF_RESET;
3371         priv->force_reset[IWL_FW_RESET].reset_duration =
3372                 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3373
3374         /* Choose which receivers/antennas to use */
3375         if (priv->cfg->ops->hcmd->set_rxon_chain)
3376                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3377
3378         iwl_init_scan_params(priv);
3379
3380         iwl_reset_qos(priv);
3381
3382         priv->qos_data.qos_active = 0;
3383         priv->qos_data.qos_cap.val = 0;
3384
3385         /* Set the tx_power_user_lmt to the lowest power level
3386          * this value will get overwritten by channel max power avg
3387          * from eeprom */
3388         priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
3389
3390         ret = iwl_init_channel_map(priv);
3391         if (ret) {
3392                 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3393                 goto err;
3394         }
3395
3396         ret = iwlcore_init_geos(priv);
3397         if (ret) {
3398                 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3399                 goto err_free_channel_map;
3400         }
3401         iwl_init_hw_rates(priv, priv->ieee_rates);
3402
3403         return 0;
3404
3405 err_free_channel_map:
3406         iwl_free_channel_map(priv);
3407 err:
3408         return ret;
3409 }
3410
3411 static void iwl_uninit_drv(struct iwl_priv *priv)
3412 {
3413         iwl_calib_free_results(priv);
3414         iwlcore_free_geos(priv);
3415         iwl_free_channel_map(priv);
3416         kfree(priv->scan);
3417 }
3418
3419 static struct attribute *iwl_sysfs_entries[] = {
3420         &dev_attr_flags.attr,
3421         &dev_attr_filter_flags.attr,
3422         &dev_attr_statistics.attr,
3423         &dev_attr_temperature.attr,
3424         &dev_attr_tx_power.attr,
3425         &dev_attr_rts_ht_protection.attr,
3426 #ifdef CONFIG_IWLWIFI_DEBUG
3427         &dev_attr_debug_level.attr,
3428 #endif
3429         NULL
3430 };
3431
3432 static struct attribute_group iwl_attribute_group = {
3433         .name = NULL,           /* put in device directory */
3434         .attrs = iwl_sysfs_entries,
3435 };
3436
3437 static struct ieee80211_ops iwl_hw_ops = {
3438         .tx = iwl_mac_tx,
3439         .start = iwl_mac_start,
3440         .stop = iwl_mac_stop,
3441         .add_interface = iwl_mac_add_interface,
3442         .remove_interface = iwl_mac_remove_interface,
3443         .config = iwl_mac_config,
3444         .configure_filter = iwl_configure_filter,
3445         .set_key = iwl_mac_set_key,
3446         .update_tkip_key = iwl_mac_update_tkip_key,
3447         .get_stats = iwl_mac_get_stats,
3448         .conf_tx = iwl_mac_conf_tx,
3449         .reset_tsf = iwl_mac_reset_tsf,
3450         .bss_info_changed = iwl_bss_info_changed,
3451         .ampdu_action = iwl_mac_ampdu_action,
3452         .hw_scan = iwl_mac_hw_scan,
3453         .sta_notify = iwl_mac_sta_notify,
3454 };
3455
3456 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3457 {
3458         int err = 0;
3459         struct iwl_priv *priv;
3460         struct ieee80211_hw *hw;
3461         struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
3462         unsigned long flags;
3463         u16 pci_cmd;
3464
3465         /************************
3466          * 1. Allocating HW data
3467          ************************/
3468
3469         /* Disabling hardware scan means that mac80211 will perform scans
3470          * "the hard way", rather than using device's scan. */
3471         if (cfg->mod_params->disable_hw_scan) {
3472                 if (iwl_debug_level & IWL_DL_INFO)
3473                         dev_printk(KERN_DEBUG, &(pdev->dev),
3474                                    "Disabling hw_scan\n");
3475                 iwl_hw_ops.hw_scan = NULL;
3476         }
3477
3478         hw = iwl_alloc_all(cfg, &iwl_hw_ops);
3479         if (!hw) {
3480                 err = -ENOMEM;
3481                 goto out;
3482         }
3483         priv = hw->priv;
3484         /* At this point both hw and priv are allocated. */
3485
3486         SET_IEEE80211_DEV(hw, &pdev->dev);
3487
3488         IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3489         priv->cfg = cfg;
3490         priv->pci_dev = pdev;
3491         priv->inta_mask = CSR_INI_SET_MASK;
3492
3493 #ifdef CONFIG_IWLWIFI_DEBUG
3494         atomic_set(&priv->restrict_refcnt, 0);
3495 #endif
3496         if (iwl_alloc_traffic_mem(priv))
3497                 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3498
3499         /**************************
3500          * 2. Initializing PCI bus
3501          **************************/
3502         if (pci_enable_device(pdev)) {
3503                 err = -ENODEV;
3504                 goto out_ieee80211_free_hw;
3505         }
3506
3507         pci_set_master(pdev);
3508
3509         err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
3510         if (!err)
3511                 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
3512         if (err) {
3513                 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3514                 if (!err)
3515                         err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3516                 /* both attempts failed: */
3517                 if (err) {
3518                         IWL_WARN(priv, "No suitable DMA available.\n");
3519                         goto out_pci_disable_device;
3520                 }
3521         }
3522
3523         err = pci_request_regions(pdev, DRV_NAME);
3524         if (err)
3525                 goto out_pci_disable_device;
3526
3527         pci_set_drvdata(pdev, priv);
3528
3529
3530         /***********************
3531          * 3. Read REV register
3532          ***********************/
3533         priv->hw_base = pci_iomap(pdev, 0, 0);
3534         if (!priv->hw_base) {
3535                 err = -ENODEV;
3536                 goto out_pci_release_regions;
3537         }
3538
3539         IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
3540                 (unsigned long long) pci_resource_len(pdev, 0));
3541         IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
3542
3543         /* these spin locks will be used in apm_ops.init and EEPROM access
3544          * we should init now
3545          */
3546         spin_lock_init(&priv->reg_lock);
3547         spin_lock_init(&priv->lock);
3548
3549         /*
3550          * stop and reset the on-board processor just in case it is in a
3551          * strange state ... like being left stranded by a primary kernel
3552          * and this is now the kdump kernel trying to start up
3553          */
3554         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3555
3556         iwl_hw_detect(priv);
3557         IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n",
3558                 priv->cfg->name, priv->hw_rev);
3559
3560         /* We disable the RETRY_TIMEOUT register (0x41) to keep
3561          * PCI Tx retries from interfering with C3 CPU state */
3562         pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
3563
3564         iwl_prepare_card_hw(priv);
3565         if (!priv->hw_ready) {
3566                 IWL_WARN(priv, "Failed, HW not ready\n");
3567                 goto out_iounmap;
3568         }
3569
3570         /*****************
3571          * 4. Read EEPROM
3572          *****************/
3573         /* Read the EEPROM */
3574         err = iwl_eeprom_init(priv);
3575         if (err) {
3576                 IWL_ERR(priv, "Unable to init EEPROM\n");
3577                 goto out_iounmap;
3578         }
3579         err = iwl_eeprom_check_version(priv);
3580         if (err)
3581                 goto out_free_eeprom;
3582
3583         /* extract MAC Address */
3584         iwl_eeprom_get_mac(priv, priv->mac_addr);
3585         IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
3586         SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
3587
3588         /************************
3589          * 5. Setup HW constants
3590          ************************/
3591         if (iwl_set_hw_params(priv)) {
3592                 IWL_ERR(priv, "failed to set hw parameters\n");
3593                 goto out_free_eeprom;
3594         }
3595
3596         /*******************
3597          * 6. Setup priv
3598          *******************/
3599
3600         err = iwl_init_drv(priv);
3601         if (err)
3602                 goto out_free_eeprom;
3603         /* At this point both hw and priv are initialized. */
3604
3605         /********************
3606          * 7. Setup services
3607          ********************/
3608         spin_lock_irqsave(&priv->lock, flags);
3609         iwl_disable_interrupts(priv);
3610         spin_unlock_irqrestore(&priv->lock, flags);
3611
3612         pci_enable_msi(priv->pci_dev);
3613
3614         iwl_alloc_isr_ict(priv);
3615         err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
3616                           IRQF_SHARED, DRV_NAME, priv);
3617         if (err) {
3618                 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
3619                 goto out_disable_msi;
3620         }
3621         err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
3622         if (err) {
3623                 IWL_ERR(priv, "failed to create sysfs device attributes\n");
3624                 goto out_free_irq;
3625         }
3626
3627         iwl_setup_deferred_work(priv);
3628         iwl_setup_rx_handlers(priv);
3629
3630         /*********************************************
3631          * 8. Enable interrupts and read RFKILL state
3632          *********************************************/
3633
3634         /* enable interrupts if needed: hw bug w/a */
3635         pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
3636         if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
3637                 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
3638                 pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
3639         }
3640
3641         iwl_enable_interrupts(priv);
3642
3643         /* If platform's RF_KILL switch is NOT set to KILL */
3644         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3645                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3646         else
3647                 set_bit(STATUS_RF_KILL_HW, &priv->status);
3648
3649         wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3650                 test_bit(STATUS_RF_KILL_HW, &priv->status));
3651
3652         iwl_power_initialize(priv);
3653         iwl_tt_initialize(priv);
3654
3655         err = iwl_request_firmware(priv, true);
3656         if (err)
3657                 goto out_remove_sysfs;
3658
3659         return 0;
3660
3661  out_remove_sysfs:
3662         destroy_workqueue(priv->workqueue);
3663         priv->workqueue = NULL;
3664         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3665  out_free_irq:
3666         free_irq(priv->pci_dev->irq, priv);
3667         iwl_free_isr_ict(priv);
3668  out_disable_msi:
3669         pci_disable_msi(priv->pci_dev);
3670         iwl_uninit_drv(priv);
3671  out_free_eeprom:
3672         iwl_eeprom_free(priv);
3673  out_iounmap:
3674         pci_iounmap(pdev, priv->hw_base);
3675  out_pci_release_regions:
3676         pci_set_drvdata(pdev, NULL);
3677         pci_release_regions(pdev);
3678  out_pci_disable_device:
3679         pci_disable_device(pdev);
3680  out_ieee80211_free_hw:
3681         iwl_free_traffic_mem(priv);
3682         ieee80211_free_hw(priv->hw);
3683  out:
3684         return err;
3685 }
3686
3687 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
3688 {
3689         struct iwl_priv *priv = pci_get_drvdata(pdev);
3690         unsigned long flags;
3691
3692         if (!priv)
3693                 return;
3694
3695         IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3696
3697         iwl_dbgfs_unregister(priv);
3698         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3699
3700         /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3701          * to be called and iwl_down since we are removing the device
3702          * we need to set STATUS_EXIT_PENDING bit.
3703          */
3704         set_bit(STATUS_EXIT_PENDING, &priv->status);
3705         if (priv->mac80211_registered) {
3706                 ieee80211_unregister_hw(priv->hw);
3707                 priv->mac80211_registered = 0;
3708         } else {
3709                 iwl_down(priv);
3710         }
3711
3712         /*
3713          * Make sure device is reset to low power before unloading driver.
3714          * This may be redundant with iwl_down(), but there are paths to
3715          * run iwl_down() without calling apm_ops.stop(), and there are
3716          * paths to avoid running iwl_down() at all before leaving driver.
3717          * This (inexpensive) call *makes sure* device is reset.
3718          */
3719         priv->cfg->ops->lib->apm_ops.stop(priv);
3720
3721         iwl_tt_exit(priv);
3722
3723         /* make sure we flush any pending irq or
3724          * tasklet for the driver
3725          */
3726         spin_lock_irqsave(&priv->lock, flags);
3727         iwl_disable_interrupts(priv);
3728         spin_unlock_irqrestore(&priv->lock, flags);
3729
3730         iwl_synchronize_irq(priv);
3731
3732         iwl_dealloc_ucode_pci(priv);
3733
3734         if (priv->rxq.bd)
3735                 iwl_rx_queue_free(priv, &priv->rxq);
3736         iwl_hw_txq_ctx_free(priv);
3737
3738         iwl_clear_stations_table(priv);
3739         iwl_eeprom_free(priv);
3740
3741
3742         /*netif_stop_queue(dev); */
3743         flush_workqueue(priv->workqueue);
3744
3745         /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3746          * priv->workqueue... so we can't take down the workqueue
3747          * until now... */
3748         destroy_workqueue(priv->workqueue);
3749         priv->workqueue = NULL;
3750         iwl_free_traffic_mem(priv);
3751
3752         free_irq(priv->pci_dev->irq, priv);
3753         pci_disable_msi(priv->pci_dev);
3754         pci_iounmap(pdev, priv->hw_base);
3755         pci_release_regions(pdev);
3756         pci_disable_device(pdev);
3757         pci_set_drvdata(pdev, NULL);
3758
3759         iwl_uninit_drv(priv);
3760
3761         iwl_free_isr_ict(priv);
3762
3763         if (priv->ibss_beacon)
3764                 dev_kfree_skb(priv->ibss_beacon);
3765
3766         ieee80211_free_hw(priv->hw);
3767 }
3768
3769
3770 /*****************************************************************************
3771  *
3772  * driver and module entry point
3773  *
3774  *****************************************************************************/
3775
3776 /* Hardware specific file defines the PCI IDs table for that hardware module */
3777 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
3778 #ifdef CONFIG_IWL4965
3779         {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
3780         {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
3781 #endif /* CONFIG_IWL4965 */
3782 #ifdef CONFIG_IWL5000
3783 /* 5100 Series WiFi */
3784         {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
3785         {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
3786         {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
3787         {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
3788         {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
3789         {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
3790         {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
3791         {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
3792         {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
3793         {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
3794         {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
3795         {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
3796         {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
3797         {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
3798         {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
3799         {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
3800         {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
3801         {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
3802         {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
3803         {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
3804         {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
3805         {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
3806         {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
3807         {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
3808
3809 /* 5300 Series WiFi */
3810         {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
3811         {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
3812         {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
3813         {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
3814         {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
3815         {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
3816         {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
3817         {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
3818         {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
3819         {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
3820         {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
3821         {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
3822
3823 /* 5350 Series WiFi/WiMax */
3824         {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
3825         {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
3826         {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
3827
3828 /* 5150 Series Wifi/WiMax */
3829         {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
3830         {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
3831         {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
3832         {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
3833         {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
3834         {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
3835
3836         {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
3837         {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
3838         {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
3839         {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
3840
3841 /* 6x00 Series */
3842         {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
3843         {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
3844         {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
3845         {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
3846         {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
3847         {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
3848         {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
3849         {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
3850         {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
3851         {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
3852
3853 /* 6x50 WiFi/WiMax Series */
3854         {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
3855         {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
3856         {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
3857         {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
3858         {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
3859         {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
3860
3861 /* 1000 Series WiFi */
3862         {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
3863         {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
3864         {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
3865         {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
3866         {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
3867         {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
3868         {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
3869         {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
3870         {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
3871         {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
3872         {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
3873         {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
3874 #endif /* CONFIG_IWL5000 */
3875
3876         {0}
3877 };
3878 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
3879
3880 static struct pci_driver iwl_driver = {
3881         .name = DRV_NAME,
3882         .id_table = iwl_hw_card_ids,
3883         .probe = iwl_pci_probe,
3884         .remove = __devexit_p(iwl_pci_remove),
3885 #ifdef CONFIG_PM
3886         .suspend = iwl_pci_suspend,
3887         .resume = iwl_pci_resume,
3888 #endif
3889 };
3890
3891 static int __init iwl_init(void)
3892 {
3893
3894         int ret;
3895         printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
3896         printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
3897
3898         ret = iwlagn_rate_control_register();
3899         if (ret) {
3900                 printk(KERN_ERR DRV_NAME
3901                        "Unable to register rate control algorithm: %d\n", ret);
3902                 return ret;
3903         }
3904
3905         ret = pci_register_driver(&iwl_driver);
3906         if (ret) {
3907                 printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
3908                 goto error_register;
3909         }
3910
3911         return ret;
3912
3913 error_register:
3914         iwlagn_rate_control_unregister();
3915         return ret;
3916 }
3917
3918 static void __exit iwl_exit(void)
3919 {
3920         pci_unregister_driver(&iwl_driver);
3921         iwlagn_rate_control_unregister();
3922 }
3923
3924 module_exit(iwl_exit);
3925 module_init(iwl_init);
3926
3927 #ifdef CONFIG_IWLWIFI_DEBUG
3928 module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
3929 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
3930 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3931 MODULE_PARM_DESC(debug, "debug output mask");
3932 #endif
3933