1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
83 #include <linux/mii.h>
85 #include <pcmcia/cs.h>
86 #include <pcmcia/cistpl.h>
87 #include <pcmcia/cisreg.h>
88 #include <pcmcia/ciscode.h>
91 #include <asm/system.h>
92 #include <asm/uaccess.h>
95 #define MANFID_COMPAQ 0x0138
96 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
99 #include <pcmcia/ds.h>
101 /* Time in jiffies before concluding Tx hung */
102 #define TX_TIMEOUT ((400*HZ)/1000)
105 * Some constants used to access the hardware
108 /* Register offsets and value constans */
109 #define XIRCREG_CR 0 /* Command register (wr) */
111 TransmitPacket = 0x01,
119 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
121 FullPktRcvd = 0x01, /* full packet in receive buffer */
122 PktRejected = 0x04, /* a packet has been rejected */
123 TxPktPend = 0x08, /* TX Packet Pending */
124 IncorPolarity = 0x10,
125 MediaSelect = 0x20 /* set if TP, clear if AUI */
127 #define XIRCREG_PR 1 /* Page Register select */
128 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
129 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
131 TxBufOvr = 0x01, /* TX Buffer Overflow */
132 PktTxed = 0x02, /* Packet Transmitted */
133 MACIntr = 0x04, /* MAC Interrupt occurred */
134 TxResGrant = 0x08, /* Tx Reservation Granted */
135 RxFullPkt = 0x20, /* Rx Full Packet */
136 RxPktRej = 0x40, /* Rx Packet Rejected */
137 ForcedIntr= 0x80 /* Forced Interrupt */
139 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
140 #define XIRCREG1_IMR1 13
141 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
142 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
143 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
144 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
146 PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
147 BrdcstPkt = 0x02, /* set if it is a broadcast packet */
148 PktTooLong = 0x04, /* set if packet length > 1518 */
149 AlignErr = 0x10, /* incorrect CRC and last octet not complete */
150 CRCErr = 0x20, /* incorrect CRC and last octet is complete */
151 PktRxOk = 0x80 /* received ok */
153 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
154 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
155 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
157 FullDuplex = 0x04, /* enable full duplex mode */
158 LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
159 DisablePolCor = 0x10,/* disable auto polarity correction */
160 DisableLinkPulse = 0x20, /* disable link pulse generation */
161 DisableAutoTx = 0x40, /* disable auto-transmit */
163 #define XIRCREG2_RBS 8 /* receive buffer start register */
164 #define XIRCREG2_LED 10 /* LED Configuration register */
165 /* values for the leds: Bits 2-0 for led 1
166 * 0 disabled Bits 5-3 for led 2
175 #define XIRCREG2_MSR 12 /* Mohawk specific register */
177 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
178 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
179 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
180 #define XIRCREG4_BOV 10 /* Bonding Version Register */
181 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
182 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
183 /* MAC register can only by accessed with 8 bit operations */
184 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
185 enum xirc_cmd { /* Commands */
194 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
195 #define XIRCREG40_RXST0 9 /* Receive Status Register */
196 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
197 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
198 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
199 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
200 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
201 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
202 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
203 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
204 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
205 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
206 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
207 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
208 #define XIRCREG45_REV 15 /* Revision Register (rd) */
209 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
211 static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
214 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
215 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
216 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
217 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
218 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
221 #define XIR_UNKNOWN 0 /* unknown: not supported */
222 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
223 #define XIR_CE2 2 /* (prodid 2) */
224 #define XIR_CE3 3 /* (prodid 3) */
225 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
226 #define XIR_CEM2 5 /* (prodid 2) */
227 #define XIR_CEM3 6 /* (prodid 3) */
228 #define XIR_CEM33 7 /* (prodid 4) */
229 #define XIR_CEM56M 8 /* (prodid 5) */
230 #define XIR_CEM56 9 /* (prodid 6) */
231 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
232 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
233 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
234 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
235 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
236 /*====================================================================*/
238 /* Module parameters */
240 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
241 MODULE_LICENSE("Dual MPL/GPL");
243 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
245 INT_MODULE_PARM(if_port, 0);
246 INT_MODULE_PARM(full_duplex, 0);
247 INT_MODULE_PARM(do_sound, 1);
248 INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
250 /*====================================================================*/
252 /* We do not process more than these number of bytes during one
253 * interrupt. (Of course we receive complete packets, so this is not
255 * Something between 2000..22000; first value gives best interrupt latency,
256 * the second enables the usage of the complete on-chip buffer. We use the
257 * high value as the initial value.
259 static unsigned maxrx_bytes = 22000;
261 /* MII management prototypes */
262 static void mii_idle(unsigned int ioaddr);
263 static void mii_putbit(unsigned int ioaddr, unsigned data);
264 static int mii_getbit(unsigned int ioaddr);
265 static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
266 static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
267 static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
268 unsigned data, int len);
271 * The event() function is this driver's Card Services event handler.
272 * It will be called by Card Services when an appropriate card status
273 * event is received. The config() and release() entry points are
274 * used to configure or release a socket, in response to card insertion
275 * and ejection events. They are invoked from the event handler.
278 static int has_ce2_string(struct pcmcia_device * link);
279 static int xirc2ps_config(struct pcmcia_device * link);
280 static void xirc2ps_release(struct pcmcia_device * link);
283 * The attach() and detach() entry points are used to create and destroy
284 * "instances" of the driver, where each instance represents everything
285 * needed to manage one actual PCMCIA card.
288 static void xirc2ps_detach(struct pcmcia_device *p_dev);
291 * You'll also need to prototype all the functions that will actually
292 * be used to talk to your device. See 'pcmem_cs' for a good example
293 * of a fully self-sufficient driver; the other drivers rely more or
294 * less on other parts of the kernel.
297 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
299 typedef struct local_info_t {
300 struct net_device *dev;
301 struct pcmcia_device *p_dev;
305 int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
306 int mohawk; /* a CE3 type card */
307 int dingo; /* a CEM56 type card */
308 int new_mii; /* has full 10baseT/100baseT MII */
309 int modem; /* is a multi function card (i.e with a modem) */
310 void __iomem *dingo_ccr; /* only used for CEM56 cards */
311 unsigned last_ptr_value; /* last packets transmitted value */
312 const char *manf_str;
313 struct work_struct tx_timeout_task;
317 * Some more prototypes
319 static netdev_tx_t do_start_xmit(struct sk_buff *skb,
320 struct net_device *dev);
321 static void xirc_tx_timeout(struct net_device *dev);
322 static void xirc2ps_tx_timeout_task(struct work_struct *work);
323 static void set_addresses(struct net_device *dev);
324 static void set_multicast_list(struct net_device *dev);
325 static int set_card_type(struct pcmcia_device *link);
326 static int do_config(struct net_device *dev, struct ifmap *map);
327 static int do_open(struct net_device *dev);
328 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
329 static const struct ethtool_ops netdev_ethtool_ops;
330 static void hardreset(struct net_device *dev);
331 static void do_reset(struct net_device *dev, int full);
332 static int init_mii(struct net_device *dev);
333 static void do_powerdown(struct net_device *dev);
334 static int do_stop(struct net_device *dev);
336 /*=============== Helper functions =========================*/
337 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
338 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
339 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
340 #define PutByte(reg,value) outb((value), ioaddr+(reg))
341 #define PutWord(reg,value) outw((value), ioaddr+(reg))
343 /*====== Functions used for debugging =================================*/
344 #if 0 /* reading regs may change system status */
346 PrintRegisters(struct net_device *dev)
348 unsigned int ioaddr = dev->base_addr;
353 printk(KDBG_XIRC "Register common: ");
354 for (i = 0; i < 8; i++)
355 printk(" %2.2x", GetByte(i));
357 for (page = 0; page <= 8; page++) {
358 printk(KDBG_XIRC "Register page %2x: ", page);
360 for (i = 8; i < 16; i++)
361 printk(" %2.2x", GetByte(i));
364 for (page=0x40 ; page <= 0x5f; page++) {
365 if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
366 (page >= 0x51 && page <=0x5e))
368 printk(KDBG_XIRC "Register page %2x: ", page);
370 for (i = 8; i < 16; i++)
371 printk(" %2.2x", GetByte(i));
378 /*============== MII Management functions ===============*/
381 * Turn around for read
384 mii_idle(unsigned int ioaddr)
386 PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
388 PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
393 * Write a bit to MDI/O
396 mii_putbit(unsigned int ioaddr, unsigned data)
400 PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
402 PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
405 PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
407 PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
412 PutWord(XIRCREG2_GPR2-1, 0x0e0e);
414 PutWord(XIRCREG2_GPR2-1, 0x0f0f);
417 PutWord(XIRCREG2_GPR2-1, 0x0c0c);
419 PutWord(XIRCREG2_GPR2-1, 0x0d0d);
426 * Get a bit from MDI/O
429 mii_getbit(unsigned int ioaddr)
433 PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
435 d = GetByte(XIRCREG2_GPR2); /* read MDIO */
436 PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
438 return d & 0x20; /* read MDIO */
442 mii_wbits(unsigned int ioaddr, unsigned data, int len)
444 unsigned m = 1 << (len-1);
446 mii_putbit(ioaddr, data & m);
450 mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg)
456 for (i=0; i < 32; i++) /* 32 bit preamble */
457 mii_putbit(ioaddr, 1);
458 mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
459 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
460 mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
461 mii_idle(ioaddr); /* turn around */
464 for (m = 1<<15; m; m >>= 1)
465 if (mii_getbit(ioaddr))
472 mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
478 for (i=0; i < 32; i++) /* 32 bit preamble */
479 mii_putbit(ioaddr, 1);
480 mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
481 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
482 mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
483 mii_putbit(ioaddr, 1); /* turn around */
484 mii_putbit(ioaddr, 0);
485 mii_wbits(ioaddr, data, len); /* And write the data */
489 /*============= Main bulk of functions =========================*/
491 static const struct net_device_ops netdev_ops = {
494 .ndo_start_xmit = do_start_xmit,
495 .ndo_tx_timeout = xirc_tx_timeout,
496 .ndo_set_config = do_config,
497 .ndo_do_ioctl = do_ioctl,
498 .ndo_set_multicast_list = set_multicast_list,
499 .ndo_change_mtu = eth_change_mtu,
500 .ndo_set_mac_address = eth_mac_addr,
501 .ndo_validate_addr = eth_validate_addr,
505 * xirc2ps_attach() creates an "instance" of the driver, allocating
506 * local data structures for one device. The device is registered
507 * with Card Services.
509 * The dev_link structure is initialized, but we don't actually
510 * configure the card at this point -- we wait until we receive a
511 * card insertion event.
515 xirc2ps_probe(struct pcmcia_device *link)
517 struct net_device *dev;
520 dev_dbg(&link->dev, "attach()\n");
522 /* Allocate the device structure */
523 dev = alloc_etherdev(sizeof(local_info_t));
526 local = netdev_priv(dev);
531 /* General socket configuration */
532 link->conf.Attributes = CONF_ENABLE_IRQ;
533 link->conf.IntType = INT_MEMORY_AND_IO;
534 link->conf.ConfigIndex = 1;
536 /* Fill in card specific entries */
537 dev->netdev_ops = &netdev_ops;
538 dev->ethtool_ops = &netdev_ethtool_ops;
539 dev->watchdog_timeo = TX_TIMEOUT;
540 INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
542 return xirc2ps_config(link);
543 } /* xirc2ps_attach */
546 * This deletes a driver "instance". The device is de-registered
547 * with Card Services. If it has been released, all local data
548 * structures are freed. Otherwise, the structures will be freed
549 * when the device is released.
553 xirc2ps_detach(struct pcmcia_device *link)
555 struct net_device *dev = link->priv;
557 dev_dbg(&link->dev, "detach\n");
559 unregister_netdev(dev);
561 xirc2ps_release(link);
564 } /* xirc2ps_detach */
567 * Detect the type of the card. s is the buffer with the data of tuple 0x20
568 * Returns: 0 := not supported
569 * mediaid=11 and prodid=47
585 set_card_type(struct pcmcia_device *link)
587 struct net_device *dev = link->priv;
588 local_info_t *local = netdev_priv(dev);
590 unsigned int cisrev, mediaid, prodid;
593 len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
595 dev_err(&link->dev, "invalid CIS -- sorry\n");
603 dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
604 cisrev, mediaid, prodid);
609 local->card_type = XIR_UNKNOWN;
610 if (!(prodid & 0x40)) {
611 printk(KNOT_XIRC "Ooops: Not a creditcard\n");
614 if (!(mediaid & 0x01)) {
615 printk(KNOT_XIRC "Not an Ethernet card\n");
618 if (mediaid & 0x10) {
620 switch(prodid & 15) {
621 case 1: local->card_type = XIR_CEM ; break;
622 case 2: local->card_type = XIR_CEM2 ; break;
623 case 3: local->card_type = XIR_CEM3 ; break;
624 case 4: local->card_type = XIR_CEM33 ; break;
625 case 5: local->card_type = XIR_CEM56M;
629 case 7: /* 7 is the RealPort 10/56 */
630 local->card_type = XIR_CEM56 ;
636 switch(prodid & 15) {
637 case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
639 case 2: local->card_type = XIR_CE2; break;
640 case 3: local->card_type = XIR_CE3;
645 if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
646 printk(KNOT_XIRC "Sorry, this is an old CE card\n");
649 if (local->card_type == XIR_UNKNOWN)
650 printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
657 * There are some CE2 cards out which claim to be a CE card.
658 * This function looks for a "CE2" in the 3rd version field.
659 * Returns: true if this is a CE2
662 has_ce2_string(struct pcmcia_device * p_dev)
664 if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
670 xirc2ps_config_modem(struct pcmcia_device *p_dev,
671 cistpl_cftable_entry_t *cf,
672 cistpl_cftable_entry_t *dflt,
678 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
679 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
680 p_dev->io.BasePort2 = cf->io.win[0].base;
681 p_dev->io.BasePort1 = ioaddr;
682 if (!pcmcia_request_io(p_dev, &p_dev->io))
690 xirc2ps_config_check(struct pcmcia_device *p_dev,
691 cistpl_cftable_entry_t *cf,
692 cistpl_cftable_entry_t *dflt,
696 int *pass = priv_data;
698 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
699 p_dev->io.BasePort2 = cf->io.win[0].base;
700 p_dev->io.BasePort1 = p_dev->io.BasePort2
701 + (*pass ? (cf->index & 0x20 ? -24:8)
702 : (cf->index & 0x20 ? 8:-24));
703 if (!pcmcia_request_io(p_dev, &p_dev->io))
711 static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
715 struct net_device *dev = priv;
718 if (tuple->TupleDataLen != 13)
720 if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
721 (tuple->TupleData[2] != 6))
723 /* another try (James Lehmer's CE2 version 4.1)*/
724 for (i = 2; i < 6; i++)
725 dev->dev_addr[i] = tuple->TupleData[i+2];
731 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
732 * is received, to configure the PCMCIA socket, and to make the
733 * ethernet device available to the system.
736 xirc2ps_config(struct pcmcia_device * link)
738 struct net_device *dev = link->priv;
739 local_info_t *local = netdev_priv(dev);
745 local->dingo_ccr = NULL;
747 dev_dbg(&link->dev, "config\n");
749 /* Is this a valid card */
750 if (link->has_manf_id == 0) {
751 printk(KNOT_XIRC "manfid not found in CIS\n");
755 switch (link->manf_id) {
757 local->manf_str = "Xircom";
760 local->manf_str = "Accton";
764 local->manf_str = "Compaq";
767 local->manf_str = "Intel";
770 local->manf_str = "Toshiba";
773 printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
774 (unsigned)link->manf_id);
777 dev_dbg(&link->dev, "found %s card\n", local->manf_str);
779 if (!set_card_type(link)) {
780 printk(KNOT_XIRC "this card is not supported\n");
784 /* get the ethernet address from the CIS */
785 err = pcmcia_get_mac_from_cis(link, dev);
787 /* not found: try to get the node-id from tuple 0x89 */
789 len = pcmcia_get_tuple(link, 0x89, &buf);
790 /* data layout looks like tuple 0x22 */
791 if (buf && len == 8) {
792 if (*buf == CISTPL_FUNCE_LAN_NODE_ID) {
794 for (i = 2; i < 6; i++)
795 dev->dev_addr[i] = buf[i+2];
803 err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
806 printk(KNOT_XIRC "node-id not found in CIS\n");
810 link->io.IOAddrLines =10;
811 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
816 link->conf.Attributes |= CONF_ENABLE_SPKR;
817 link->conf.Status |= CCSR_AUDIO_ENA;
819 link->io.NumPorts2 = 8;
820 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
822 /* Take the Modem IO port from the CIS and scan for a free
824 link->io.NumPorts1 = 16; /* no Mako stuff anymore */
825 if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
828 link->io.NumPorts1 = 18;
829 /* We do 2 passes here: The first one uses the regular mapping and
830 * the second tries again, thereby considering that the 32 ports are
831 * mirrored every 32 bytes. Actually we use a mirrored port for
832 * the Mako if (on the first pass) the COR bit 5 is set.
834 for (pass=0; pass < 2; pass++)
835 if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
837 /* if special option:
838 * try to configure as Ethernet only.
841 printk(KNOT_XIRC "no ports available\n");
843 link->io.NumPorts1 = 16;
844 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
845 link->io.BasePort1 = ioaddr;
846 if (!(err=pcmcia_request_io(link, &link->io)))
849 link->io.BasePort1 = 0; /* let CS decide */
850 if ((err=pcmcia_request_io(link, &link->io)))
858 * Now allocate an interrupt line. Note that this does not
859 * actually assign a handler to the interrupt.
861 if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
865 * This actually configures the PCMCIA socket -- setting up
866 * the I/O windows and the interrupt mapping.
868 if ((err=pcmcia_request_configuration(link, &link->conf)))
875 /* Reset the modem's BAR to the correct value
876 * This is necessary because in the RequestConfiguration call,
877 * the base address of the ethernet port (BasePort1) is written
878 * to the BAR registers of the modem.
880 err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
881 link->resource[1]->start & 0xff);
885 err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
886 (link->resource[1]->start >> 8) & 0xff);
890 /* There is no config entry for the Ethernet part which
891 * is at 0x0800. So we allocate a window into the attribute
892 * memory and write direct to the CIS registers
894 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
895 req.Base = req.Size = 0;
897 if ((err = pcmcia_request_window(link, &req, &link->win)))
900 local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
901 mem.CardOffset = 0x0;
903 if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
906 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
909 writeb(0x47, local->dingo_ccr + CISREG_COR);
910 ioaddr = link->resource[0]->start;
911 writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
912 writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
917 printk(KERN_INFO "ECOR:");
918 for (i=0; i < 7; i++) {
919 tmp = readb(local->dingo_ccr + i*2);
920 printk(" %02x", tmp);
923 printk(KERN_INFO "DCOR:");
924 for (i=0; i < 4; i++) {
925 tmp = readb(local->dingo_ccr + 0x20 + i*2);
926 printk(" %02x", tmp);
929 printk(KERN_INFO "SCOR:");
930 for (i=0; i < 10; i++) {
931 tmp = readb(local->dingo_ccr + 0x40 + i*2);
932 printk(" %02x", tmp);
938 writeb(0x01, local->dingo_ccr + 0x20);
939 writeb(0x0c, local->dingo_ccr + 0x22);
940 writeb(0x00, local->dingo_ccr + 0x24);
941 writeb(0x00, local->dingo_ccr + 0x26);
942 writeb(0x00, local->dingo_ccr + 0x28);
945 /* The if_port symbol can be set when the module is loaded */
948 local->probe_port = dev->if_port = 1;
949 } else if ((if_port >= 1 && if_port <= 2) ||
950 (local->mohawk && if_port==4))
951 dev->if_port = if_port;
953 printk(KNOT_XIRC "invalid if_port requested\n");
955 /* we can now register the device with the net subsystem */
956 dev->irq = link->irq;
957 dev->base_addr = link->resource[0]->start;
960 do_reset(dev, 1); /* a kludge to make the cem56 work */
962 SET_NETDEV_DEV(dev, &link->dev);
964 if ((err=register_netdev(dev))) {
965 printk(KNOT_XIRC "register_netdev() failed\n");
969 /* give some infos about the hardware */
970 printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
971 dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
977 xirc2ps_release(link);
982 } /* xirc2ps_config */
985 * After a card is removed, xirc2ps_release() will unregister the net
986 * device, and release the PCMCIA configuration. If the device is
987 * still open, this will be postponed until it is closed.
990 xirc2ps_release(struct pcmcia_device *link)
992 dev_dbg(&link->dev, "release\n");
995 struct net_device *dev = link->priv;
996 local_info_t *local = netdev_priv(dev);
998 iounmap(local->dingo_ccr - 0x0800);
1000 pcmcia_disable_device(link);
1001 } /* xirc2ps_release */
1003 /*====================================================================*/
1006 static int xirc2ps_suspend(struct pcmcia_device *link)
1008 struct net_device *dev = link->priv;
1011 netif_device_detach(dev);
1018 static int xirc2ps_resume(struct pcmcia_device *link)
1020 struct net_device *dev = link->priv;
1024 netif_device_attach(dev);
1031 /*====================================================================*/
1034 * This is the Interrupt service route.
1037 xirc2ps_interrupt(int irq, void *dev_id)
1039 struct net_device *dev = (struct net_device *)dev_id;
1040 local_info_t *lp = netdev_priv(dev);
1041 unsigned int ioaddr;
1043 unsigned bytes_rcvd;
1044 unsigned int_status, eth_status, rx_status, tx_status;
1045 unsigned rsr, pktlen;
1046 ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
1047 * is this something to worry about?
1051 if (!netif_device_present(dev))
1054 ioaddr = dev->base_addr;
1055 if (lp->mohawk) { /* must disable the interrupt */
1056 PutByte(XIRCREG_CR, 0);
1059 pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
1061 saved_page = GetByte(XIRCREG_PR);
1062 /* Read the ISR to see whats the cause for the interrupt.
1063 * This also clears the interrupt flags on CE2 cards
1065 int_status = GetByte(XIRCREG_ISR);
1068 if (int_status == 0xff) { /* card may be ejected */
1069 pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
1072 eth_status = GetByte(XIRCREG_ESR);
1075 rx_status = GetByte(XIRCREG40_RXST0);
1076 PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1077 tx_status = GetByte(XIRCREG40_TXST0);
1078 tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1079 PutByte(XIRCREG40_TXST0, 0);
1080 PutByte(XIRCREG40_TXST1, 0);
1082 pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1083 dev->name, int_status, eth_status, rx_status, tx_status);
1085 /***** receive section ******/
1087 while (eth_status & FullPktRcvd) {
1088 rsr = GetByte(XIRCREG0_RSR);
1089 if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1090 /* too many bytes received during this int, drop the rest of the
1092 dev->stats.rx_dropped++;
1093 pr_debug("%s: RX drop, too much done\n", dev->name);
1094 } else if (rsr & PktRxOk) {
1095 struct sk_buff *skb;
1097 pktlen = GetWord(XIRCREG0_RBC);
1098 bytes_rcvd += pktlen;
1100 pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
1102 skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
1104 printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
1106 dev->stats.rx_dropped++;
1107 } else { /* okay get the packet */
1108 skb_reserve(skb, 2);
1109 if (lp->silicon == 0 ) { /* work around a hardware bug */
1110 unsigned rhsa; /* receive start address */
1113 rhsa = GetWord(XIRCREG5_RHSA0);
1115 rhsa += 3; /* skip control infos */
1118 if (rhsa + pktlen > 0x8000) {
1120 u_char *buf = skb_put(skb, pktlen);
1121 for (i=0; i < pktlen ; i++, rhsa++) {
1122 buf[i] = GetByte(XIRCREG_EDP);
1123 if (rhsa == 0x8000) {
1129 insw(ioaddr+XIRCREG_EDP,
1130 skb_put(skb, pktlen), (pktlen+1)>>1);
1134 else if (lp->mohawk) {
1135 /* To use this 32 bit access we should use
1136 * a manual optimized loop
1137 * Also the words are swapped, we can get more
1138 * performance by using 32 bit access and swapping
1139 * the words in a register. Will need this for cardbus
1141 * Note: don't forget to change the ALLOC_SKB to .. +3
1144 u_long *p = skb_put(skb, pktlen);
1146 unsigned int edpreg = ioaddr+XIRCREG_EDP-2;
1147 for (i=0; i < len ; i += 4, p++) {
1149 __asm__("rorl $16,%0\n\t"
1157 insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1160 skb->protocol = eth_type_trans(skb, dev);
1162 dev->stats.rx_packets++;
1163 dev->stats.rx_bytes += pktlen;
1164 if (!(rsr & PhyPkt))
1165 dev->stats.multicast++;
1167 } else { /* bad packet */
1168 pr_debug("rsr=%#02x\n", rsr);
1170 if (rsr & PktTooLong) {
1171 dev->stats.rx_frame_errors++;
1172 pr_debug("%s: Packet too long\n", dev->name);
1175 dev->stats.rx_crc_errors++;
1176 pr_debug("%s: CRC error\n", dev->name);
1178 if (rsr & AlignErr) {
1179 dev->stats.rx_fifo_errors++; /* okay ? */
1180 pr_debug("%s: Alignment error\n", dev->name);
1183 /* clear the received/dropped/error packet */
1184 PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1186 /* get the new ethernet status */
1187 eth_status = GetByte(XIRCREG_ESR);
1189 if (rx_status & 0x10) { /* Receive overrun */
1190 dev->stats.rx_over_errors++;
1191 PutByte(XIRCREG_CR, ClearRxOvrun);
1192 pr_debug("receive overrun cleared\n");
1195 /***** transmit section ******/
1196 if (int_status & PktTxed) {
1199 n = lp->last_ptr_value;
1200 nn = GetByte(XIRCREG0_PTR);
1201 lp->last_ptr_value = nn;
1202 if (nn < n) /* rollover */
1203 dev->stats.tx_packets += 256 - n;
1204 else if (n == nn) { /* happens sometimes - don't know why */
1205 pr_debug("PTR not changed?\n");
1207 dev->stats.tx_packets += lp->last_ptr_value - n;
1208 netif_wake_queue(dev);
1210 if (tx_status & 0x0002) { /* Execessive collissions */
1211 pr_debug("tx restarted due to execssive collissions\n");
1212 PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
1214 if (tx_status & 0x0040)
1215 dev->stats.tx_aborted_errors++;
1217 /* recalculate our work chunk so that we limit the duration of this
1218 * ISR to about 1/10 of a second.
1219 * Calculate only if we received a reasonable amount of bytes.
1221 if (bytes_rcvd > 1000) {
1222 u_long duration = jiffies - start_ticks;
1224 if (duration >= HZ/10) { /* if more than about 1/10 second */
1225 maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1226 if (maxrx_bytes < 2000)
1228 else if (maxrx_bytes > 22000)
1229 maxrx_bytes = 22000;
1230 pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
1231 maxrx_bytes, bytes_rcvd, duration);
1232 } else if (!duration && maxrx_bytes < 22000) {
1233 /* now much faster */
1234 maxrx_bytes += 2000;
1235 if (maxrx_bytes > 22000)
1236 maxrx_bytes = 22000;
1237 pr_debug("set maxrx=%u\n", maxrx_bytes);
1243 if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1246 SelectPage(saved_page);
1247 PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
1248 /* Instead of dropping packets during a receive, we could
1249 * force an interrupt with this command:
1250 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1253 } /* xirc2ps_interrupt */
1255 /*====================================================================*/
1258 xirc2ps_tx_timeout_task(struct work_struct *work)
1260 local_info_t *local =
1261 container_of(work, local_info_t, tx_timeout_task);
1262 struct net_device *dev = local->dev;
1263 /* reset the card */
1265 dev->trans_start = jiffies; /* prevent tx timeout */
1266 netif_wake_queue(dev);
1270 xirc_tx_timeout(struct net_device *dev)
1272 local_info_t *lp = netdev_priv(dev);
1273 dev->stats.tx_errors++;
1274 printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
1275 schedule_work(&lp->tx_timeout_task);
1279 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1281 local_info_t *lp = netdev_priv(dev);
1282 unsigned int ioaddr = dev->base_addr;
1285 unsigned pktlen = skb->len;
1287 pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
1291 /* adjust the packet length to min. required
1292 * and hope that the buffer is large enough
1293 * to provide some random data.
1294 * fixme: For Mohawk we can change this by sending
1295 * a larger packetlen than we actually have; the chip will
1296 * pad this in his buffer with random bytes
1298 if (pktlen < ETH_ZLEN)
1300 if (skb_padto(skb, ETH_ZLEN))
1301 return NETDEV_TX_OK;
1305 netif_stop_queue(dev);
1307 PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1308 freespace = GetWord(XIRCREG0_TSO);
1309 okay = freespace & 0x8000;
1310 freespace &= 0x7fff;
1311 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1312 okay = pktlen +2 < freespace;
1313 pr_debug("%s: avail. tx space=%u%s\n",
1314 dev->name, freespace, okay ? " (okay)":" (not enough)");
1315 if (!okay) { /* not enough space */
1316 return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */
1318 /* send the packet */
1319 PutWord(XIRCREG_EDP, (u_short)pktlen);
1320 outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1322 PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1325 PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1327 dev_kfree_skb (skb);
1328 dev->stats.tx_bytes += pktlen;
1329 netif_start_queue(dev);
1330 return NETDEV_TX_OK;
1333 struct set_address_info {
1337 unsigned int ioaddr;
1340 static void set_address(struct set_address_info *sa_info, char *addr)
1342 unsigned int ioaddr = sa_info->ioaddr;
1345 for (i = 0; i < 6; i++) {
1346 if (sa_info->reg_nr > 15) {
1347 sa_info->reg_nr = 8;
1349 SelectPage(sa_info->page_nr);
1351 if (sa_info->mohawk)
1352 PutByte(sa_info->reg_nr++, addr[5 - i]);
1354 PutByte(sa_info->reg_nr++, addr[i]);
1359 * Set all addresses: This first one is the individual address,
1360 * the next 9 addresses are taken from the multicast list and
1361 * the rest is filled with the individual address.
1363 static void set_addresses(struct net_device *dev)
1365 unsigned int ioaddr = dev->base_addr;
1366 local_info_t *lp = netdev_priv(dev);
1367 struct netdev_hw_addr *ha;
1368 struct set_address_info sa_info;
1372 * Setup the info structure so that by first set_address call it will do
1373 * SelectPage with the right page number. Hence these ones here.
1375 sa_info.reg_nr = 15 + 1;
1376 sa_info.page_nr = 0x50 - 1;
1377 sa_info.mohawk = lp->mohawk;
1378 sa_info.ioaddr = ioaddr;
1380 set_address(&sa_info, dev->dev_addr);
1382 netdev_for_each_mc_addr(ha, dev) {
1385 set_address(&sa_info, ha->addr);
1388 set_address(&sa_info, dev->dev_addr);
1393 * Set or clear the multicast filter for this adaptor.
1394 * We can filter up to 9 addresses, if more are requested we set
1395 * multicast promiscuous mode.
1399 set_multicast_list(struct net_device *dev)
1401 unsigned int ioaddr = dev->base_addr;
1405 value = GetByte(XIRCREG42_SWC1) & 0xC0;
1407 if (dev->flags & IFF_PROMISC) { /* snoop */
1408 PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
1409 } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) {
1410 PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
1411 } else if (!netdev_mc_empty(dev)) {
1412 /* the chip can filter 9 addresses perfectly */
1413 PutByte(XIRCREG42_SWC1, value | 0x01);
1415 PutByte(XIRCREG40_CMD0, Offline);
1418 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1419 } else { /* standard usage */
1420 PutByte(XIRCREG42_SWC1, value | 0x00);
1426 do_config(struct net_device *dev, struct ifmap *map)
1428 local_info_t *local = netdev_priv(dev);
1430 pr_debug("do_config(%p)\n", dev);
1431 if (map->port != 255 && map->port != dev->if_port) {
1435 local->probe_port = 1;
1438 local->probe_port = 0;
1439 dev->if_port = map->port;
1441 printk(KERN_INFO "%s: switching to %s port\n",
1442 dev->name, if_names[dev->if_port]);
1443 do_reset(dev,1); /* not the fine way :-) */
1452 do_open(struct net_device *dev)
1454 local_info_t *lp = netdev_priv(dev);
1455 struct pcmcia_device *link = lp->p_dev;
1457 dev_dbg(&link->dev, "do_open(%p)\n", dev);
1459 /* Check that the PCMCIA card is still here. */
1460 /* Physical device present signature. */
1461 if (!pcmcia_dev_present(link))
1467 netif_start_queue(dev);
1473 static void netdev_get_drvinfo(struct net_device *dev,
1474 struct ethtool_drvinfo *info)
1476 strcpy(info->driver, "xirc2ps_cs");
1477 sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
1480 static const struct ethtool_ops netdev_ethtool_ops = {
1481 .get_drvinfo = netdev_get_drvinfo,
1485 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1487 local_info_t *local = netdev_priv(dev);
1488 unsigned int ioaddr = dev->base_addr;
1489 struct mii_ioctl_data *data = if_mii(rq);
1491 pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1492 dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1493 data->phy_id, data->reg_num, data->val_in, data->val_out);
1499 case SIOCGMIIPHY: /* Get the address of the PHY in use. */
1500 data->phy_id = 0; /* we have only this address */
1502 case SIOCGMIIREG: /* Read the specified MII register. */
1503 data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
1504 data->reg_num & 0x1f);
1506 case SIOCSMIIREG: /* Write the specified MII register */
1507 mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
1517 hardreset(struct net_device *dev)
1519 local_info_t *local = netdev_priv(dev);
1520 unsigned int ioaddr = dev->base_addr;
1524 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1525 msleep(40); /* wait 40 msec */
1527 PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
1529 PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1530 msleep(20); /* wait 20 msec */
1534 do_reset(struct net_device *dev, int full)
1536 local_info_t *local = netdev_priv(dev);
1537 unsigned int ioaddr = dev->base_addr;
1540 pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
1543 PutByte(XIRCREG_CR, SoftReset); /* set */
1544 msleep(20); /* wait 20 msec */
1545 PutByte(XIRCREG_CR, 0); /* clear */
1546 msleep(40); /* wait 40 msec */
1547 if (local->mohawk) {
1549 /* set pin GP1 and GP2 to output (0x0c)
1550 * set GP1 to low to power up the ML6692 (0x00)
1551 * set GP2 to high to power up the 10Mhz chip (0x02)
1553 PutByte(XIRCREG4_GPR0, 0x0e);
1556 /* give the circuits some time to power up */
1557 msleep(500); /* about 500ms */
1559 local->last_ptr_value = 0;
1560 local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1561 : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1563 if (local->probe_port) {
1564 if (!local->mohawk) {
1566 PutByte(XIRCREG4_GPR0, 4);
1567 local->probe_port = 0;
1569 } else if (dev->if_port == 2) { /* enable 10Base2 */
1571 PutByte(XIRCREG42_SWC1, 0xC0);
1572 } else { /* enable 10BaseT */
1574 PutByte(XIRCREG42_SWC1, 0x80);
1576 msleep(40); /* wait 40 msec to let it complete */
1581 value = GetByte(XIRCREG_ESR); /* read the ESR */
1582 printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
1588 PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1589 PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
1590 value = GetByte(XIRCREG1_ECR);
1593 value |= DisableLinkPulse;
1594 PutByte(XIRCREG1_ECR, value);
1596 pr_debug("%s: ECR is: %#02x\n", dev->name, value);
1599 PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1601 if (local->silicon != 1) {
1602 /* set the local memory dividing line.
1603 * The comments in the sample code say that this is only
1604 * settable with the scipper version 2 which is revision 0.
1605 * Always for CE3 cards
1608 PutWord(XIRCREG2_RBS, 0x2000);
1614 /* Hardware workaround:
1615 * The receive byte pointer after reset is off by 1 so we need
1616 * to move the offset pointer back to 0.
1619 PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1621 /* setup MAC IMRs and clear status registers */
1622 SelectPage(0x40); /* Bit 7 ... bit 0 */
1623 PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1624 PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1625 PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1626 PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1627 PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1628 PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1630 if (full && local->mohawk && init_mii(dev)) {
1631 if (dev->if_port == 4 || local->dingo || local->new_mii) {
1632 printk(KERN_INFO "%s: MII selected\n", dev->name);
1634 PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1637 printk(KERN_INFO "%s: MII detected; using 10mbs\n",
1640 if (dev->if_port == 2) /* enable 10Base2 */
1641 PutByte(XIRCREG42_SWC1, 0xC0);
1642 else /* enable 10BaseT */
1643 PutByte(XIRCREG42_SWC1, 0x80);
1644 msleep(40); /* wait 40 msec to let it complete */
1647 PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1648 } else { /* No MII */
1650 value = GetByte(XIRCREG_ESR); /* read the ESR */
1651 dev->if_port = (value & MediaSelect) ? 1 : 2;
1654 /* configure the LEDs */
1656 if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1657 PutByte(XIRCREG2_LED, 0x3b);
1658 else /* Coax: Not-Collision and Activity */
1659 PutByte(XIRCREG2_LED, 0x3a);
1662 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1664 /* enable receiver and put the mac online */
1666 set_multicast_list(dev);
1668 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1671 /* setup Ethernet IMR and enable interrupts */
1673 PutByte(XIRCREG1_IMR0, 0xff);
1676 PutByte(XIRCREG_CR, EnableIntr);
1677 if (local->modem && !local->dingo) { /* do some magic */
1678 if (!(GetByte(0x10) & 0x01))
1679 PutByte(0x10, 0x11); /* unmask master-int bit */
1683 printk(KERN_INFO "%s: media %s, silicon revision %d\n",
1684 dev->name, if_names[dev->if_port], local->silicon);
1685 /* We should switch back to page 0 to avoid a bug in revision 0
1686 * where regs with offset below 8 can't be read after an access
1687 * to the MAC registers */
1692 * Initialize the Media-Independent-Interface
1693 * Returns: True if we have a good MII
1696 init_mii(struct net_device *dev)
1698 local_info_t *local = netdev_priv(dev);
1699 unsigned int ioaddr = dev->base_addr;
1700 unsigned control, status, linkpartner;
1703 if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1704 dev->if_port = if_port;
1705 local->probe_port = 0;
1709 status = mii_rd(ioaddr, 0, 1);
1710 if ((status & 0xff00) != 0x7800)
1711 return 0; /* No MII */
1713 local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1715 if (local->probe_port)
1716 control = 0x1000; /* auto neg */
1717 else if (dev->if_port == 4)
1718 control = 0x2000; /* no auto neg, 100mbs mode */
1720 control = 0x0000; /* no auto neg, 10mbs mode */
1721 mii_wr(ioaddr, 0, 0, control, 16);
1723 control = mii_rd(ioaddr, 0, 0);
1725 if (control & 0x0400) {
1726 printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
1728 local->probe_port = 0;
1732 if (local->probe_port) {
1733 /* according to the DP83840A specs the auto negotiation process
1734 * may take up to 3.5 sec, so we use this also for our ML6692
1735 * Fixme: Better to use a timer here!
1737 for (i=0; i < 35; i++) {
1738 msleep(100); /* wait 100 msec */
1739 status = mii_rd(ioaddr, 0, 1);
1740 if ((status & 0x0020) && (status & 0x0004))
1744 if (!(status & 0x0020)) {
1745 printk(KERN_INFO "%s: autonegotiation failed;"
1746 " using 10mbs\n", dev->name);
1747 if (!local->new_mii) {
1749 mii_wr(ioaddr, 0, 0, control, 16);
1752 dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1755 linkpartner = mii_rd(ioaddr, 0, 5);
1756 printk(KERN_INFO "%s: MII link partner: %04x\n",
1757 dev->name, linkpartner);
1758 if (linkpartner & 0x0080) {
1769 do_powerdown(struct net_device *dev)
1772 unsigned int ioaddr = dev->base_addr;
1774 pr_debug("do_powerdown(%p)\n", dev);
1777 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1782 do_stop(struct net_device *dev)
1784 unsigned int ioaddr = dev->base_addr;
1785 local_info_t *lp = netdev_priv(dev);
1786 struct pcmcia_device *link = lp->p_dev;
1788 dev_dbg(&link->dev, "do_stop(%p)\n", dev);
1793 netif_stop_queue(dev);
1796 PutByte(XIRCREG_CR, 0); /* disable interrupts */
1798 PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
1800 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1807 static struct pcmcia_device_id xirc2ps_ids[] = {
1808 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1809 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1810 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1811 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1812 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1813 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1814 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1815 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1816 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1817 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1818 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1819 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1820 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1821 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1822 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1823 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1824 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1825 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1826 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1827 /* also matches CFE-10 cards! */
1828 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1831 MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
1834 static struct pcmcia_driver xirc2ps_cs_driver = {
1835 .owner = THIS_MODULE,
1837 .name = "xirc2ps_cs",
1839 .probe = xirc2ps_probe,
1840 .remove = xirc2ps_detach,
1841 .id_table = xirc2ps_ids,
1842 .suspend = xirc2ps_suspend,
1843 .resume = xirc2ps_resume,
1847 init_xirc2ps_cs(void)
1849 return pcmcia_register_driver(&xirc2ps_cs_driver);
1853 exit_xirc2ps_cs(void)
1855 pcmcia_unregister_driver(&xirc2ps_cs_driver);
1858 module_init(init_xirc2ps_cs);
1859 module_exit(exit_xirc2ps_cs);
1862 static int __init setup_xirc2ps_cs(char *str)
1864 /* if_port, full_duplex, do_sound, lockup_hack
1866 int ints[10] = { -1 };
1868 str = get_options(str, 9, ints);
1870 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1871 MAYBE_SET(if_port, 3);
1872 MAYBE_SET(full_duplex, 4);
1873 MAYBE_SET(do_sound, 5);
1874 MAYBE_SET(lockup_hack, 6);
1880 __setup("xirc2ps_cs=", setup_xirc2ps_cs);