2 * Driver for the Conexant CX23885 PCIe bridge
4 * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/device.h>
26 #include <linux/kthread.h>
27 #include <linux/file.h>
28 #include <linux/suspend.h>
31 #include <media/v4l2-common.h>
33 #include "dvb_ca_en50221.h"
43 #include "tuner-xc2028.h"
44 #include "tuner-simple.h"
46 #include "dibx000_common.h"
49 #include "stv0900_reg.h"
55 #include "netup-eeprom.h"
56 #include "netup-init.h"
60 #include "cx23885-f300.h"
62 static unsigned int debug;
64 #define dprintk(level, fmt, arg...)\
65 do { if (debug >= level)\
66 printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
69 /* ------------------------------------------------------------------ */
71 static unsigned int alt_tuner;
72 module_param(alt_tuner, int, 0644);
73 MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
75 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
77 /* ------------------------------------------------------------------ */
79 static int dvb_buf_setup(struct videobuf_queue *q,
80 unsigned int *count, unsigned int *size)
82 struct cx23885_tsport *port = q->priv_data;
84 port->ts_packet_size = 188 * 4;
85 port->ts_packet_count = 32;
87 *size = port->ts_packet_size * port->ts_packet_count;
92 static int dvb_buf_prepare(struct videobuf_queue *q,
93 struct videobuf_buffer *vb, enum v4l2_field field)
95 struct cx23885_tsport *port = q->priv_data;
96 return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
99 static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
101 struct cx23885_tsport *port = q->priv_data;
102 cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
105 static void dvb_buf_release(struct videobuf_queue *q,
106 struct videobuf_buffer *vb)
108 cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
111 static struct videobuf_queue_ops dvb_qops = {
112 .buf_setup = dvb_buf_setup,
113 .buf_prepare = dvb_buf_prepare,
114 .buf_queue = dvb_buf_queue,
115 .buf_release = dvb_buf_release,
118 static struct s5h1409_config hauppauge_generic_config = {
119 .demod_address = 0x32 >> 1,
120 .output_mode = S5H1409_SERIAL_OUTPUT,
121 .gpio = S5H1409_GPIO_ON,
123 .inversion = S5H1409_INVERSION_OFF,
124 .status_mode = S5H1409_DEMODLOCKING,
125 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
128 static struct tda10048_config hauppauge_hvr1200_config = {
129 .demod_address = 0x10 >> 1,
130 .output_mode = TDA10048_SERIAL_OUTPUT,
131 .fwbulkwritelen = TDA10048_BULKWRITE_200,
132 .inversion = TDA10048_INVERSION_ON,
133 .dtv6_if_freq_khz = TDA10048_IF_3300,
134 .dtv7_if_freq_khz = TDA10048_IF_3800,
135 .dtv8_if_freq_khz = TDA10048_IF_4300,
136 .clk_freq_khz = TDA10048_CLK_16000,
139 static struct tda10048_config hauppauge_hvr1210_config = {
140 .demod_address = 0x10 >> 1,
141 .output_mode = TDA10048_SERIAL_OUTPUT,
142 .fwbulkwritelen = TDA10048_BULKWRITE_200,
143 .inversion = TDA10048_INVERSION_ON,
144 .dtv6_if_freq_khz = TDA10048_IF_3300,
145 .dtv7_if_freq_khz = TDA10048_IF_3500,
146 .dtv8_if_freq_khz = TDA10048_IF_4000,
147 .clk_freq_khz = TDA10048_CLK_16000,
150 static struct s5h1409_config hauppauge_ezqam_config = {
151 .demod_address = 0x32 >> 1,
152 .output_mode = S5H1409_SERIAL_OUTPUT,
153 .gpio = S5H1409_GPIO_OFF,
155 .inversion = S5H1409_INVERSION_ON,
156 .status_mode = S5H1409_DEMODLOCKING,
157 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
160 static struct s5h1409_config hauppauge_hvr1800lp_config = {
161 .demod_address = 0x32 >> 1,
162 .output_mode = S5H1409_SERIAL_OUTPUT,
163 .gpio = S5H1409_GPIO_OFF,
165 .inversion = S5H1409_INVERSION_OFF,
166 .status_mode = S5H1409_DEMODLOCKING,
167 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
170 static struct s5h1409_config hauppauge_hvr1500_config = {
171 .demod_address = 0x32 >> 1,
172 .output_mode = S5H1409_SERIAL_OUTPUT,
173 .gpio = S5H1409_GPIO_OFF,
174 .inversion = S5H1409_INVERSION_OFF,
175 .status_mode = S5H1409_DEMODLOCKING,
176 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
179 static struct mt2131_config hauppauge_generic_tunerconfig = {
183 static struct lgdt330x_config fusionhdtv_5_express = {
184 .demod_address = 0x0e,
185 .demod_chip = LGDT3303,
189 static struct s5h1409_config hauppauge_hvr1500q_config = {
190 .demod_address = 0x32 >> 1,
191 .output_mode = S5H1409_SERIAL_OUTPUT,
192 .gpio = S5H1409_GPIO_ON,
194 .inversion = S5H1409_INVERSION_OFF,
195 .status_mode = S5H1409_DEMODLOCKING,
196 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
199 static struct s5h1409_config dvico_s5h1409_config = {
200 .demod_address = 0x32 >> 1,
201 .output_mode = S5H1409_SERIAL_OUTPUT,
202 .gpio = S5H1409_GPIO_ON,
204 .inversion = S5H1409_INVERSION_OFF,
205 .status_mode = S5H1409_DEMODLOCKING,
206 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
209 static struct s5h1411_config dvico_s5h1411_config = {
210 .output_mode = S5H1411_SERIAL_OUTPUT,
211 .gpio = S5H1411_GPIO_ON,
212 .qam_if = S5H1411_IF_44000,
213 .vsb_if = S5H1411_IF_44000,
214 .inversion = S5H1411_INVERSION_OFF,
215 .status_mode = S5H1411_DEMODLOCKING,
216 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
219 static struct s5h1411_config hcw_s5h1411_config = {
220 .output_mode = S5H1411_SERIAL_OUTPUT,
221 .gpio = S5H1411_GPIO_OFF,
222 .vsb_if = S5H1411_IF_44000,
223 .qam_if = S5H1411_IF_4000,
224 .inversion = S5H1411_INVERSION_ON,
225 .status_mode = S5H1411_DEMODLOCKING,
226 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
229 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
234 static struct xc5000_config dvico_xc5000_tunerconfig = {
239 static struct tda829x_config tda829x_no_probe = {
240 .probe_tuner = TDA829X_DONT_PROBE,
243 static struct tda18271_std_map hauppauge_tda18271_std_map = {
244 .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
245 .if_lvl = 6, .rfagc_top = 0x37 },
246 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
247 .if_lvl = 6, .rfagc_top = 0x37 },
250 static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
251 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
252 .if_lvl = 1, .rfagc_top = 0x37, },
253 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
254 .if_lvl = 1, .rfagc_top = 0x37, },
255 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
256 .if_lvl = 1, .rfagc_top = 0x37, },
259 static struct tda18271_config hauppauge_tda18271_config = {
260 .std_map = &hauppauge_tda18271_std_map,
261 .gate = TDA18271_GATE_ANALOG,
262 .output_opt = TDA18271_OUTPUT_LT_OFF,
265 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
266 .std_map = &hauppauge_hvr1200_tda18271_std_map,
267 .gate = TDA18271_GATE_ANALOG,
268 .output_opt = TDA18271_OUTPUT_LT_OFF,
271 static struct tda18271_config hauppauge_hvr1210_tuner_config = {
272 .gate = TDA18271_GATE_DIGITAL,
273 .output_opt = TDA18271_OUTPUT_LT_OFF,
276 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
277 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
278 .if_lvl = 1, .rfagc_top = 0x58 },
279 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
280 .if_lvl = 1, .rfagc_top = 0x58 },
283 static struct tda18271_config hauppauge_hvr127x_config = {
284 .std_map = &hauppauge_hvr127x_std_map,
285 .output_opt = TDA18271_OUTPUT_LT_OFF,
288 static struct lgdt3305_config hauppauge_lgdt3305_config = {
290 .mpeg_mode = LGDT3305_MPEG_SERIAL,
291 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
292 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
294 .spectral_inversion = 1,
299 static struct dibx000_agc_config xc3028_agc_config = {
300 BAND_VHF | BAND_UHF, /* band_caps */
302 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
303 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
304 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
305 * P_agc_nb_est=2, P_agc_write=0
307 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
308 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
311 21, /* time_stabiliz */
323 39718, /* agc2_max */
332 29, /* agc2_slope1 */
333 29, /* agc2_slope2 */
340 1, /* perform_agc_softsplit */
343 /* PLL Configuration for COFDM BW_MHz = 8.000000
344 * With external clock = 30.000000 */
345 static struct dibx000_bandwidth_config xc3028_bw_config = {
346 60000, /* internal */
347 30000, /* sampling */
348 1, /* pll_cfg: prediv */
349 8, /* pll_cfg: ratio */
350 3, /* pll_cfg: range */
351 1, /* pll_cfg: reset */
352 0, /* pll_cfg: bypass */
353 0, /* misc: refdiv */
354 0, /* misc: bypclk_div */
355 1, /* misc: IO_CLK_en_core */
356 1, /* misc: ADClkSrc */
357 0, /* misc: modulo */
358 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
359 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
361 30000000 /* xtal_hz */
364 static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
365 .output_mpeg2_in_188_bytes = 1,
366 .hostbus_diversity = 1,
367 .tuner_is_baseband = 0,
370 .agc_config_count = 1,
371 .agc = &xc3028_agc_config,
372 .bw = &xc3028_bw_config,
374 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
375 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
376 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
382 .output_mode = OUTMODE_MPEG2_SERIAL,
385 static struct zl10353_config dvico_fusionhdtv_xc3028 = {
386 .demod_address = 0x0f,
389 .disable_i2c_gate_ctrl = 1,
392 static struct stv0900_reg stv0900_ts_regs[] = {
393 { R0900_TSGENERAL, 0x00 },
394 { R0900_P1_TSSPEED, 0x40 },
395 { R0900_P2_TSSPEED, 0x40 },
396 { R0900_P1_TSCFGM, 0xc0 },
397 { R0900_P2_TSCFGM, 0xc0 },
398 { R0900_P1_TSCFGH, 0xe0 },
399 { R0900_P2_TSCFGH, 0xe0 },
400 { R0900_P1_TSCFGL, 0x20 },
401 { R0900_P2_TSCFGL, 0x20 },
402 { 0xffff, 0xff }, /* terminate */
405 static struct stv0900_config netup_stv0900_config = {
406 .demod_address = 0x68,
407 .demod_mode = 1, /* dual */
409 .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
410 .diseqc_mode = 2,/* 2/3 PWM */
411 .ts_config_regs = stv0900_ts_regs,
412 .tun1_maddress = 0,/* 0x60 */
413 .tun2_maddress = 3,/* 0x63 */
414 .tun1_adc = 1,/* 1 Vpp */
415 .tun2_adc = 1,/* 1 Vpp */
418 static struct stv6110_config netup_stv6110_tunerconfig_a = {
422 .gain = 8, /* +16 dB - maximum gain */
425 static struct stv6110_config netup_stv6110_tunerconfig_b = {
429 .gain = 8, /* +16 dB - maximum gain */
432 static struct cx24116_config tbs_cx24116_config = {
433 .demod_address = 0x55,
436 static struct ds3000_config tevii_ds3000_config = {
437 .demod_address = 0x68,
440 static struct cx24116_config dvbworld_cx24116_config = {
441 .demod_address = 0x05,
444 static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
445 .prod = LGS8GXX_PROD_LGS8GL5,
446 .demod_address = 0x19,
450 .if_clk_freq = 30400, /* 30.4 MHz */
451 .if_freq = 5380, /* 5.38 MHz */
458 static struct xc5000_config mygica_x8506_xc5000_config = {
463 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
464 struct dvb_frontend_parameters *param)
466 struct cx23885_tsport *port = fe->dvb->priv;
467 struct cx23885_dev *dev = port->dev;
469 switch (dev->board) {
470 case CX23885_BOARD_HAUPPAUGE_HVR1275:
471 switch (param->u.vsb.modulation) {
473 cx23885_gpio_clear(dev, GPIO_5);
478 cx23885_gpio_set(dev, GPIO_5);
482 case CX23885_BOARD_MYGICA_X8506:
483 case CX23885_BOARD_MAGICPRO_PROHDTVE2:
484 /* Select Digital TV */
485 cx23885_gpio_set(dev, GPIO_0);
491 static int cx23885_dvb_fe_ioctl_override(struct dvb_frontend *fe,
492 unsigned int cmd, void *parg,
498 case DVB_FE_IOCTL_PRE:
501 case FE_SET_FRONTEND:
502 err = cx23885_dvb_set_frontend(fe,
503 (struct dvb_frontend_parameters *) parg);
508 case DVB_FE_IOCTL_POST:
509 /* no post-ioctl handling required */
516 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
517 .prod = LGS8GXX_PROD_LGS8G75,
518 .demod_address = 0x19,
522 .if_clk_freq = 30400, /* 30.4 MHz */
523 .if_freq = 6500, /* 6.50 MHz */
527 .adc_vpp = 2, /* 1.6 Vpp */
531 static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
536 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
537 .prod = ATBM8830_PROD_8830,
538 .demod_address = 0x44,
540 .ts_sampling_edge = 1,
542 .osc_clk_freq = 30400, /* in kHz */
543 .if_freq = 0, /* zero IF */
550 static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
555 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
556 .prod = ATBM8830_PROD_8830,
557 .demod_address = 0x44,
559 .ts_sampling_edge = 1,
561 .osc_clk_freq = 30400, /* in kHz */
562 .if_freq = 0, /* zero IF */
569 static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
574 static int dvb_register(struct cx23885_tsport *port)
576 struct cx23885_dev *dev = port->dev;
577 struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
578 struct videobuf_dvb_frontend *fe0;
581 /* Get the first frontend */
582 fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
586 /* init struct videobuf_dvb */
587 fe0->dvb.name = dev->name;
590 switch (dev->board) {
591 case CX23885_BOARD_HAUPPAUGE_HVR1250:
592 i2c_bus = &dev->i2c_bus[0];
593 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
594 &hauppauge_generic_config,
596 if (fe0->dvb.frontend != NULL) {
597 dvb_attach(mt2131_attach, fe0->dvb.frontend,
599 &hauppauge_generic_tunerconfig, 0);
602 case CX23885_BOARD_HAUPPAUGE_HVR1270:
603 case CX23885_BOARD_HAUPPAUGE_HVR1275:
604 i2c_bus = &dev->i2c_bus[0];
605 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
606 &hauppauge_lgdt3305_config,
608 if (fe0->dvb.frontend != NULL) {
609 dvb_attach(tda18271_attach, fe0->dvb.frontend,
610 0x60, &dev->i2c_bus[1].i2c_adap,
611 &hauppauge_hvr127x_config);
614 case CX23885_BOARD_HAUPPAUGE_HVR1255:
615 i2c_bus = &dev->i2c_bus[0];
616 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
619 if (fe0->dvb.frontend != NULL) {
620 dvb_attach(tda18271_attach, fe0->dvb.frontend,
621 0x60, &dev->i2c_bus[1].i2c_adap,
622 &hauppauge_tda18271_config);
625 case CX23885_BOARD_HAUPPAUGE_HVR1800:
626 i2c_bus = &dev->i2c_bus[0];
630 dvb_attach(s5h1409_attach,
631 &hauppauge_ezqam_config,
633 if (fe0->dvb.frontend != NULL) {
634 dvb_attach(tda829x_attach, fe0->dvb.frontend,
635 &dev->i2c_bus[1].i2c_adap, 0x42,
637 dvb_attach(tda18271_attach, fe0->dvb.frontend,
638 0x60, &dev->i2c_bus[1].i2c_adap,
639 &hauppauge_tda18271_config);
645 dvb_attach(s5h1409_attach,
646 &hauppauge_generic_config,
648 if (fe0->dvb.frontend != NULL)
649 dvb_attach(mt2131_attach, fe0->dvb.frontend,
651 &hauppauge_generic_tunerconfig, 0);
655 case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
656 i2c_bus = &dev->i2c_bus[0];
657 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
658 &hauppauge_hvr1800lp_config,
660 if (fe0->dvb.frontend != NULL) {
661 dvb_attach(mt2131_attach, fe0->dvb.frontend,
663 &hauppauge_generic_tunerconfig, 0);
666 case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
667 i2c_bus = &dev->i2c_bus[0];
668 fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
669 &fusionhdtv_5_express,
671 if (fe0->dvb.frontend != NULL) {
672 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
673 &i2c_bus->i2c_adap, 0x61,
674 TUNER_LG_TDVS_H06XF);
677 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
678 i2c_bus = &dev->i2c_bus[1];
679 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
680 &hauppauge_hvr1500q_config,
681 &dev->i2c_bus[0].i2c_adap);
682 if (fe0->dvb.frontend != NULL)
683 dvb_attach(xc5000_attach, fe0->dvb.frontend,
685 &hauppauge_hvr1500q_tunerconfig);
687 case CX23885_BOARD_HAUPPAUGE_HVR1500:
688 i2c_bus = &dev->i2c_bus[1];
689 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
690 &hauppauge_hvr1500_config,
691 &dev->i2c_bus[0].i2c_adap);
692 if (fe0->dvb.frontend != NULL) {
693 struct dvb_frontend *fe;
694 struct xc2028_config cfg = {
695 .i2c_adap = &i2c_bus->i2c_adap,
698 static struct xc2028_ctrl ctl = {
699 .fname = XC2028_DEFAULT_FIRMWARE,
701 .demod = XC3028_FE_OREN538,
704 fe = dvb_attach(xc2028_attach,
705 fe0->dvb.frontend, &cfg);
706 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
707 fe->ops.tuner_ops.set_config(fe, &ctl);
710 case CX23885_BOARD_HAUPPAUGE_HVR1200:
711 case CX23885_BOARD_HAUPPAUGE_HVR1700:
712 i2c_bus = &dev->i2c_bus[0];
713 fe0->dvb.frontend = dvb_attach(tda10048_attach,
714 &hauppauge_hvr1200_config,
716 if (fe0->dvb.frontend != NULL) {
717 dvb_attach(tda829x_attach, fe0->dvb.frontend,
718 &dev->i2c_bus[1].i2c_adap, 0x42,
720 dvb_attach(tda18271_attach, fe0->dvb.frontend,
721 0x60, &dev->i2c_bus[1].i2c_adap,
722 &hauppauge_hvr1200_tuner_config);
725 case CX23885_BOARD_HAUPPAUGE_HVR1210:
726 i2c_bus = &dev->i2c_bus[0];
727 fe0->dvb.frontend = dvb_attach(tda10048_attach,
728 &hauppauge_hvr1210_config,
730 if (fe0->dvb.frontend != NULL) {
731 dvb_attach(tda18271_attach, fe0->dvb.frontend,
732 0x60, &dev->i2c_bus[1].i2c_adap,
733 &hauppauge_hvr1210_tuner_config);
736 case CX23885_BOARD_HAUPPAUGE_HVR1400:
737 i2c_bus = &dev->i2c_bus[0];
738 fe0->dvb.frontend = dvb_attach(dib7000p_attach,
740 0x12, &hauppauge_hvr1400_dib7000_config);
741 if (fe0->dvb.frontend != NULL) {
742 struct dvb_frontend *fe;
743 struct xc2028_config cfg = {
744 .i2c_adap = &dev->i2c_bus[1].i2c_adap,
747 static struct xc2028_ctrl ctl = {
748 .fname = XC3028L_DEFAULT_FIRMWARE,
751 /* This is true for all demods with
753 .type = XC2028_D2633,
756 fe = dvb_attach(xc2028_attach,
757 fe0->dvb.frontend, &cfg);
758 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
759 fe->ops.tuner_ops.set_config(fe, &ctl);
762 case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
763 i2c_bus = &dev->i2c_bus[port->nr - 1];
765 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
766 &dvico_s5h1409_config,
768 if (fe0->dvb.frontend == NULL)
769 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
770 &dvico_s5h1411_config,
772 if (fe0->dvb.frontend != NULL)
773 dvb_attach(xc5000_attach, fe0->dvb.frontend,
775 &dvico_xc5000_tunerconfig);
777 case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
778 i2c_bus = &dev->i2c_bus[port->nr - 1];
780 fe0->dvb.frontend = dvb_attach(zl10353_attach,
781 &dvico_fusionhdtv_xc3028,
783 if (fe0->dvb.frontend != NULL) {
784 struct dvb_frontend *fe;
785 struct xc2028_config cfg = {
786 .i2c_adap = &i2c_bus->i2c_adap,
789 static struct xc2028_ctrl ctl = {
790 .fname = XC2028_DEFAULT_FIRMWARE,
792 .demod = XC3028_FE_ZARLINK456,
795 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
797 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
798 fe->ops.tuner_ops.set_config(fe, &ctl);
802 case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
803 case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
804 case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
805 i2c_bus = &dev->i2c_bus[0];
807 fe0->dvb.frontend = dvb_attach(zl10353_attach,
808 &dvico_fusionhdtv_xc3028,
810 if (fe0->dvb.frontend != NULL) {
811 struct dvb_frontend *fe;
812 struct xc2028_config cfg = {
813 .i2c_adap = &dev->i2c_bus[1].i2c_adap,
816 static struct xc2028_ctrl ctl = {
817 .fname = XC2028_DEFAULT_FIRMWARE,
819 .demod = XC3028_FE_ZARLINK456,
822 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
824 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
825 fe->ops.tuner_ops.set_config(fe, &ctl);
828 case CX23885_BOARD_TBS_6920:
829 i2c_bus = &dev->i2c_bus[1];
831 fe0->dvb.frontend = dvb_attach(cx24116_attach,
834 if (fe0->dvb.frontend != NULL)
835 fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
838 case CX23885_BOARD_TEVII_S470:
839 i2c_bus = &dev->i2c_bus[1];
841 fe0->dvb.frontend = dvb_attach(ds3000_attach,
842 &tevii_ds3000_config,
844 if (fe0->dvb.frontend != NULL)
845 fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
848 case CX23885_BOARD_DVBWORLD_2005:
849 i2c_bus = &dev->i2c_bus[1];
851 fe0->dvb.frontend = dvb_attach(cx24116_attach,
852 &dvbworld_cx24116_config,
855 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
856 i2c_bus = &dev->i2c_bus[0];
860 fe0->dvb.frontend = dvb_attach(stv0900_attach,
861 &netup_stv0900_config,
862 &i2c_bus->i2c_adap, 0);
863 if (fe0->dvb.frontend != NULL) {
864 if (dvb_attach(stv6110_attach,
866 &netup_stv6110_tunerconfig_a,
867 &i2c_bus->i2c_adap)) {
868 if (!dvb_attach(lnbh24_attach,
871 LNBH24_PCL | LNBH24_TTX,
874 "No LNBH24 found!\n");
881 fe0->dvb.frontend = dvb_attach(stv0900_attach,
882 &netup_stv0900_config,
883 &i2c_bus->i2c_adap, 1);
884 if (fe0->dvb.frontend != NULL) {
885 if (dvb_attach(stv6110_attach,
887 &netup_stv6110_tunerconfig_b,
888 &i2c_bus->i2c_adap)) {
889 if (!dvb_attach(lnbh24_attach,
892 LNBH24_PCL | LNBH24_TTX,
895 "No LNBH24 found!\n");
902 case CX23885_BOARD_MYGICA_X8506:
903 i2c_bus = &dev->i2c_bus[0];
904 i2c_bus2 = &dev->i2c_bus[1];
905 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
906 &mygica_x8506_lgs8gl5_config,
908 if (fe0->dvb.frontend != NULL) {
909 dvb_attach(xc5000_attach,
912 &mygica_x8506_xc5000_config);
915 case CX23885_BOARD_MAGICPRO_PROHDTVE2:
916 i2c_bus = &dev->i2c_bus[0];
917 i2c_bus2 = &dev->i2c_bus[1];
918 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
919 &magicpro_prohdtve2_lgs8g75_config,
921 if (fe0->dvb.frontend != NULL) {
922 dvb_attach(xc5000_attach,
925 &magicpro_prohdtve2_xc5000_config);
928 case CX23885_BOARD_HAUPPAUGE_HVR1850:
929 case CX23885_BOARD_HAUPPAUGE_HVR1290:
930 i2c_bus = &dev->i2c_bus[0];
931 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
934 if (fe0->dvb.frontend != NULL)
935 dvb_attach(tda18271_attach, fe0->dvb.frontend,
936 0x60, &dev->i2c_bus[0].i2c_adap,
937 &hauppauge_tda18271_config);
939 case CX23885_BOARD_MYGICA_X8558PRO:
943 i2c_bus = &dev->i2c_bus[0];
944 fe0->dvb.frontend = dvb_attach(atbm8830_attach,
945 &mygica_x8558pro_atbm8830_cfg1,
947 if (fe0->dvb.frontend != NULL) {
948 dvb_attach(max2165_attach,
951 &mygic_x8558pro_max2165_cfg1);
956 i2c_bus = &dev->i2c_bus[1];
957 fe0->dvb.frontend = dvb_attach(atbm8830_attach,
958 &mygica_x8558pro_atbm8830_cfg2,
960 if (fe0->dvb.frontend != NULL) {
961 dvb_attach(max2165_attach,
964 &mygic_x8558pro_max2165_cfg2);
971 printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
972 " isn't supported yet\n",
976 if (NULL == fe0->dvb.frontend) {
977 printk(KERN_ERR "%s: frontend initialization failed\n",
981 /* define general-purpose callback pointer */
982 fe0->dvb.frontend->callback = cx23885_tuner_callback;
984 /* Put the analog decoder in standby to keep it quiet */
985 call_all(dev, core, s_power, 0);
987 if (fe0->dvb.frontend->ops.analog_ops.standby)
988 fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
990 /* register everything */
991 ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
992 &dev->pci->dev, adapter_nr, 0,
993 cx23885_dvb_fe_ioctl_override);
996 switch (dev->board) {
997 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
998 static struct netup_card_info cinfo;
1000 netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
1001 memcpy(port->frontends.adapter.proposed_mac,
1002 cinfo.port[port->nr - 1].mac, 6);
1003 printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
1004 port->nr, port->frontends.adapter.proposed_mac);
1006 netup_ci_init(port);
1009 case CX23885_BOARD_TEVII_S470: {
1010 u8 eeprom[256]; /* 24C02 i2c eeprom */
1015 /* Read entire EEPROM */
1016 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
1017 tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
1018 printk(KERN_INFO "TeVii S470 MAC= "
1019 "%02X:%02X:%02X:%02X:%02X:%02X\n",
1020 eeprom[0xa0], eeprom[0xa1], eeprom[0xa2],
1021 eeprom[0xa3], eeprom[0xa4], eeprom[0xa5]);
1022 memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
1030 int cx23885_dvb_register(struct cx23885_tsport *port)
1033 struct videobuf_dvb_frontend *fe0;
1034 struct cx23885_dev *dev = port->dev;
1037 /* Here we need to allocate the correct number of frontends,
1038 * as reflected in the cards struct. The reality is that currently
1039 * no cx23885 boards support this - yet. But, if we don't modify this
1040 * code then the second frontend would never be allocated (later)
1041 * and fail with error before the attach in dvb_register().
1042 * Without these changes we risk an OOPS later. The changes here
1043 * are for safety, and should provide a good foundation for the
1044 * future addition of any multi-frontend cx23885 based boards.
1046 printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
1047 port->num_frontends);
1049 for (i = 1; i <= port->num_frontends; i++) {
1050 if (videobuf_dvb_alloc_frontend(
1051 &port->frontends, i) == NULL) {
1052 printk(KERN_ERR "%s() failed to alloc\n", __func__);
1056 fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
1060 dprintk(1, "%s\n", __func__);
1061 dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
1070 /* We have to init the queue for each frontend on a port. */
1071 printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
1072 videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
1073 &dev->pci->dev, &port->slock,
1074 V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
1075 sizeof(struct cx23885_buffer), port);
1077 err = dvb_register(port);
1079 printk(KERN_ERR "%s() dvb_register failed err = %d\n",
1085 int cx23885_dvb_unregister(struct cx23885_tsport *port)
1087 struct videobuf_dvb_frontend *fe0;
1089 /* FIXME: in an error condition where the we have
1090 * an expected number of frontends (attach problem)
1091 * then this might not clean up correctly, if 1
1093 * This comment only applies to future boards IF they
1094 * implement MFE support.
1096 fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
1097 if (fe0->dvb.frontend)
1098 videobuf_dvb_unregister_bus(&port->frontends);
1100 switch (port->dev->board) {
1101 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
1102 netup_ci_exit(port);