drivers/char/ipmi/ipmi_si_intf.c

   1 /*
   2  * ipmi_si.c
   3  *
   4  * The interface to the IPMI driver for the system interfaces (KCS, SMIC,
   5  * BT).
   6  *
   7  * Author: MontaVista Software, Inc.
   8  *         Corey Minyard <minyard@mvista.com>
   9  *         source@mvista.com
  10  *
  11  * Copyright 2002 MontaVista Software Inc.
  12  * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
  13  *
  14  *  This program is free software; you can redistribute it and/or modify it
  15  *  under the terms of the GNU General Public License as published by the
  16  *  Free Software Foundation; either version 2 of the License, or (at your
  17  *  option) any later version.
  18  *
  19  *
  20  *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  21  *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  22  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  23  *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  24  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  25  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  26  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  27  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  28  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  29  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  *  You should have received a copy of the GNU General Public License along
  32  *  with this program; if not, write to the Free Software Foundation, Inc.,
  33  *  675 Mass Ave, Cambridge, MA 02139, USA.
  34  */
  35
  36 /*
  37  * This file holds the "policy" for the interface to the SMI state
  38  * machine.  It does the configuration, handles timers and interrupts,
  39  * and drives the real SMI state machine.
  40  */
  41
  42 #include <linux/module.h>
  43 #include <linux/moduleparam.h>
  44 #include <asm/system.h>
  45 #include <linux/sched.h>
  46 #include <linux/timer.h>
  47 #include <linux/errno.h>
  48 #include <linux/spinlock.h>
  49 #include <linux/slab.h>
  50 #include <linux/delay.h>
  51 #include <linux/list.h>
  52 #include <linux/pci.h>
  53 #include <linux/ioport.h>
  54 #include <linux/notifier.h>
  55 #include <linux/mutex.h>
  56 #include <linux/kthread.h>
  57 #include <asm/irq.h>
  58 #include <linux/interrupt.h>
  59 #include <linux/rcupdate.h>
  60 #include <linux/ipmi_smi.h>
  61 #include <asm/io.h>
  62 #include "ipmi_si_sm.h"
  63 #include <linux/init.h>
  64 #include <linux/dmi.h>
  65 #include <linux/string.h>
  66 #include <linux/ctype.h>
  67 #include <linux/pnp.h>
  68
  69 #ifdef CONFIG_PPC_OF
  70 #include <linux/of_device.h>
  71 #include <linux/of_platform.h>
  72 #endif
  73
  74 #define PFX "ipmi_si: "
  75
  76 /* Measure times between events in the driver. */
  77 #undef DEBUG_TIMING
  78
  79 /* Call every 10 ms. */
  80 #define SI_TIMEOUT_TIME_USEC    10000
  81 #define SI_USEC_PER_JIFFY       (1000000/HZ)
  82 #define SI_TIMEOUT_JIFFIES      (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
  83 #define SI_SHORT_TIMEOUT_USEC  250 /* .25ms when the SM request a
  84                                       short timeout */
  85
  86 enum si_intf_state {
  87         SI_NORMAL,
  88         SI_GETTING_FLAGS,
  89         SI_GETTING_EVENTS,
  90         SI_CLEARING_FLAGS,
  91         SI_CLEARING_FLAGS_THEN_SET_IRQ,
  92         SI_GETTING_MESSAGES,
  93         SI_ENABLE_INTERRUPTS1,
  94         SI_ENABLE_INTERRUPTS2,
  95         SI_DISABLE_INTERRUPTS1,
  96         SI_DISABLE_INTERRUPTS2
  97         /* FIXME - add watchdog stuff. */
  98 };
  99
 100 /* Some BT-specific defines we need here. */
 101 #define IPMI_BT_INTMASK_REG             2
 102 #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT   2
 103 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT  1
 104
 105 enum si_type {
 106     SI_KCS, SI_SMIC, SI_BT
 107 };
 108 static char *si_to_str[] = { "kcs", "smic", "bt" };
 109
 110 enum ipmi_addr_src {
 111         SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
 112         SI_PCI, SI_DEVICETREE, SI_DEFAULT
 113 };
 114 static char *ipmi_addr_src_to_str[] = { NULL, "hotmod", "hardcoded", "SPMI",
 115                                         "ACPI", "SMBIOS", "PCI",
 116                                         "device-tree", "default" };
 117
 118 #define DEVICE_NAME "ipmi_si"
 119
 120 static struct platform_driver ipmi_driver = {
 121         .driver = {
 122                 .name = DEVICE_NAME,
 123                 .bus = &platform_bus_type
 124         }
 125 };
 126
 127
 128 /*
 129  * Indexes into stats[] in smi_info below.
 130  */
 131 enum si_stat_indexes {
 132         /*
 133          * Number of times the driver requested a timer while an operation
 134          * was in progress.
 135          */
 136         SI_STAT_short_timeouts = 0,
 137
 138         /*
 139          * Number of times the driver requested a timer while nothing was in
 140          * progress.
 141          */
 142         SI_STAT_long_timeouts,
 143
 144         /* Number of times the interface was idle while being polled. */
 145         SI_STAT_idles,
 146
 147         /* Number of interrupts the driver handled. */
 148         SI_STAT_interrupts,
 149
 150         /* Number of time the driver got an ATTN from the hardware. */
 151         SI_STAT_attentions,
 152
 153         /* Number of times the driver requested flags from the hardware. */
 154         SI_STAT_flag_fetches,
 155
 156         /* Number of times the hardware didn't follow the state machine. */
 157         SI_STAT_hosed_count,
 158
 159         /* Number of completed messages. */
 160         SI_STAT_complete_transactions,
 161
 162         /* Number of IPMI events received from the hardware. */
 163         SI_STAT_events,
 164
 165         /* Number of watchdog pretimeouts. */
 166         SI_STAT_watchdog_pretimeouts,
 167
 168         /* Number of asyncronous messages received. */
 169         SI_STAT_incoming_messages,
 170
 171
 172         /* This *must* remain last, add new values above this. */
 173         SI_NUM_STATS
 174 };
 175
 176 struct smi_info {
 177         int                    intf_num;
 178         ipmi_smi_t             intf;
 179         struct si_sm_data      *si_sm;
 180         struct si_sm_handlers  *handlers;
 181         enum si_type           si_type;
 182         spinlock_t             si_lock;
 183         spinlock_t             msg_lock;
 184         struct list_head       xmit_msgs;
 185         struct list_head       hp_xmit_msgs;
 186         struct ipmi_smi_msg    *curr_msg;
 187         enum si_intf_state     si_state;
 188
 189         /*
 190          * Used to handle the various types of I/O that can occur with
 191          * IPMI
 192          */
 193         struct si_sm_io io;
 194         int (*io_setup)(struct smi_info *info);
 195         void (*io_cleanup)(struct smi_info *info);
 196         int (*irq_setup)(struct smi_info *info);
 197         void (*irq_cleanup)(struct smi_info *info);
 198         unsigned int io_size;
 199         enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
 200         void (*addr_source_cleanup)(struct smi_info *info);
 201         void *addr_source_data;
 202
 203         /*
 204          * Per-OEM handler, called from handle_flags().  Returns 1
 205          * when handle_flags() needs to be re-run or 0 indicating it
 206          * set si_state itself.
 207          */
 208         int (*oem_data_avail_handler)(struct smi_info *smi_info);
 209
 210         /*
 211          * Flags from the last GET_MSG_FLAGS command, used when an ATTN
 212          * is set to hold the flags until we are done handling everything
 213          * from the flags.
 214          */
 215 #define RECEIVE_MSG_AVAIL       0x01
 216 #define EVENT_MSG_BUFFER_FULL   0x02
 217 #define WDT_PRE_TIMEOUT_INT     0x08
 218 #define OEM0_DATA_AVAIL     0x20
 219 #define OEM1_DATA_AVAIL     0x40
 220 #define OEM2_DATA_AVAIL     0x80
 221 #define OEM_DATA_AVAIL      (OEM0_DATA_AVAIL | \
 222                              OEM1_DATA_AVAIL | \
 223                              OEM2_DATA_AVAIL)
 224         unsigned char       msg_flags;
 225
 226         /* Does the BMC have an event buffer? */
 227         char                has_event_buffer;
 228
 229         /*
 230          * If set to true, this will request events the next time the
 231          * state machine is idle.
 232          */
 233         atomic_t            req_events;
 234
 235         /*
 236          * If true, run the state machine to completion on every send
 237          * call.  Generally used after a panic to make sure stuff goes
 238          * out.
 239          */
 240         int                 run_to_completion;
 241
 242         /* The I/O port of an SI interface. */
 243         int                 port;
 244
 245         /*
 246          * The space between start addresses of the two ports.  For
 247          * instance, if the first port is 0xca2 and the spacing is 4, then
 248          * the second port is 0xca6.
 249          */
 250         unsigned int        spacing;
 251
 252         /* zero if no irq; */
 253         int                 irq;
 254
 255         /* The timer for this si. */
 256         struct timer_list   si_timer;
 257
 258         /* The time (in jiffies) the last timeout occurred at. */
 259         unsigned long       last_timeout_jiffies;
 260
 261         /* Used to gracefully stop the timer without race conditions. */
 262         atomic_t            stop_operation;
 263
 264         /*
 265          * The driver will disable interrupts when it gets into a
 266          * situation where it cannot handle messages due to lack of
 267          * memory.  Once that situation clears up, it will re-enable
 268          * interrupts.
 269          */
 270         int interrupt_disabled;
 271
 272         /* From the get device id response... */
 273         struct ipmi_device_id device_id;
 274
 275         /* Driver model stuff. */
 276         struct device *dev;
 277         struct platform_device *pdev;
 278
 279         /*
 280          * True if we allocated the device, false if it came from
 281          * someplace else (like PCI).
 282          */
 283         int dev_registered;
 284
 285         /* Slave address, could be reported from DMI. */
 286         unsigned char slave_addr;
 287
 288         /* Counters and things for the proc filesystem. */
 289         atomic_t stats[SI_NUM_STATS];
 290
 291         struct task_struct *thread;
 292
 293         struct list_head link;
 294 };
 295
 296 #define smi_inc_stat(smi, stat) \
 297         atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
 298 #define smi_get_stat(smi, stat) \
 299         ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
 300
 301 #define SI_MAX_PARMS 4
 302
 303 static int force_kipmid[SI_MAX_PARMS];
 304 static int num_force_kipmid;
 305 #ifdef CONFIG_PCI
 306 static int pci_registered;
 307 #endif
 308 #ifdef CONFIG_ACPI
 309 static int pnp_registered;
 310 #endif
 311 #ifdef CONFIG_PPC_OF
 312 static int of_registered;
 313 #endif
 314
 315 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 316 static int num_max_busy_us;
 317
 318 static int unload_when_empty = 1;
 319
 320 static int add_smi(struct smi_info *smi);
 321 static int try_smi_init(struct smi_info *smi);
 322 static void cleanup_one_si(struct smi_info *to_clean);
 323
 324 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
 325 static int register_xaction_notifier(struct notifier_block *nb)
 326 {
 327         return atomic_notifier_chain_register(&xaction_notifier_list, nb);
 328 }
 329
 330 static void deliver_recv_msg(struct smi_info *smi_info,
 331                              struct ipmi_smi_msg *msg)
 332 {
 333         /* Deliver the message to the upper layer with the lock
 334            released. */
 335
 336         if (smi_info->run_to_completion) {
 337                 ipmi_smi_msg_received(smi_info->intf, msg);
 338         } else {
 339                 spin_unlock(&(smi_info->si_lock));
 340                 ipmi_smi_msg_received(smi_info->intf, msg);
 341                 spin_lock(&(smi_info->si_lock));
 342         }
 343 }
 344
 345 static void return_hosed_msg(struct smi_info *smi_info, int cCode)
 346 {
 347         struct ipmi_smi_msg *msg = smi_info->curr_msg;
 348
 349         if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED)
 350                 cCode = IPMI_ERR_UNSPECIFIED;
 351         /* else use it as is */
 352
 353         /* Make it a reponse */
 354         msg->rsp[0] = msg->data[0] | 4;
 355         msg->rsp[1] = msg->data[1];
 356         msg->rsp[2] = cCode;
 357         msg->rsp_size = 3;
 358
 359         smi_info->curr_msg = NULL;
 360         deliver_recv_msg(smi_info, msg);
 361 }
 362
 363 static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 364 {
 365         int              rv;
 366         struct list_head *entry = NULL;
 367 #ifdef DEBUG_TIMING
 368         struct timeval t;
 369 #endif
 370
 371         /*
 372          * No need to save flags, we aleady have interrupts off and we
 373          * already hold the SMI lock.
 374          */
 375         if (!smi_info->run_to_completion)
 376                 spin_lock(&(smi_info->msg_lock));
 377
 378         /* Pick the high priority queue first. */
 379         if (!list_empty(&(smi_info->hp_xmit_msgs))) {
 380                 entry = smi_info->hp_xmit_msgs.next;
 381         } else if (!list_empty(&(smi_info->xmit_msgs))) {
 382                 entry = smi_info->xmit_msgs.next;
 383         }
 384
 385         if (!entry) {
 386                 smi_info->curr_msg = NULL;
 387                 rv = SI_SM_IDLE;
 388         } else {
 389                 int err;
 390
 391                 list_del(entry);
 392                 smi_info->curr_msg = list_entry(entry,
 393                                                 struct ipmi_smi_msg,
 394                                                 link);
 395 #ifdef DEBUG_TIMING
 396                 do_gettimeofday(&t);
 397                 printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 398 #endif
 399                 err = atomic_notifier_call_chain(&xaction_notifier_list,
 400                                 0, smi_info);
 401                 if (err & NOTIFY_STOP_MASK) {
 402                         rv = SI_SM_CALL_WITHOUT_DELAY;
 403                         goto out;
 404                 }
 405                 err = smi_info->handlers->start_transaction(
 406                         smi_info->si_sm,
 407                         smi_info->curr_msg->data,
 408                         smi_info->curr_msg->data_size);
 409                 if (err)
 410                         return_hosed_msg(smi_info, err);
 411
 412                 rv = SI_SM_CALL_WITHOUT_DELAY;
 413         }
 414  out:
 415         if (!smi_info->run_to_completion)
 416                 spin_unlock(&(smi_info->msg_lock));
 417
 418         return rv;
 419 }
 420
 421 static void start_enable_irq(struct smi_info *smi_info)
 422 {
 423         unsigned char msg[2];
 424
 425         /*
 426          * If we are enabling interrupts, we have to tell the
 427          * BMC to use them.
 428          */
 429         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 430         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 431
 432         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 433         smi_info->si_state = SI_ENABLE_INTERRUPTS1;
 434 }
 435
 436 static void start_disable_irq(struct smi_info *smi_info)
 437 {
 438         unsigned char msg[2];
 439
 440         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 441         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 442
 443         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 444         smi_info->si_state = SI_DISABLE_INTERRUPTS1;
 445 }
 446
 447 static void start_clear_flags(struct smi_info *smi_info)
 448 {
 449         unsigned char msg[3];
 450
 451         /* Make sure the watchdog pre-timeout flag is not set at startup. */
 452         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 453         msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
 454         msg[2] = WDT_PRE_TIMEOUT_INT;
 455
 456         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
 457         smi_info->si_state = SI_CLEARING_FLAGS;
 458 }
 459
 460 /*
 461  * When we have a situtaion where we run out of memory and cannot
 462  * allocate messages, we just leave them in the BMC and run the system
 463  * polled until we can allocate some memory.  Once we have some
 464  * memory, we will re-enable the interrupt.
 465  */
 466 static inline void disable_si_irq(struct smi_info *smi_info)
 467 {
 468         if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 469                 start_disable_irq(smi_info);
 470                 smi_info->interrupt_disabled = 1;
 471                 if (!atomic_read(&smi_info->stop_operation))
 472                         mod_timer(&smi_info->si_timer,
 473                                   jiffies + SI_TIMEOUT_JIFFIES);
 474         }
 475 }
 476
 477 static inline void enable_si_irq(struct smi_info *smi_info)
 478 {
 479         if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
 480                 start_enable_irq(smi_info);
 481                 smi_info->interrupt_disabled = 0;
 482         }
 483 }
 484
 485 static void handle_flags(struct smi_info *smi_info)
 486 {
 487  retry:
 488         if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
 489                 /* Watchdog pre-timeout */
 490                 smi_inc_stat(smi_info, watchdog_pretimeouts);
 491
 492                 start_clear_flags(smi_info);
 493                 smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
 494                 spin_unlock(&(smi_info->si_lock));
 495                 ipmi_smi_watchdog_pretimeout(smi_info->intf);
 496                 spin_lock(&(smi_info->si_lock));
 497         } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
 498                 /* Messages available. */
 499                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 500                 if (!smi_info->curr_msg) {
 501                         disable_si_irq(smi_info);
 502                         smi_info->si_state = SI_NORMAL;
 503                         return;
 504                 }
 505                 enable_si_irq(smi_info);
 506
 507                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 508                 smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD;
 509                 smi_info->curr_msg->data_size = 2;
 510
 511                 smi_info->handlers->start_transaction(
 512                         smi_info->si_sm,
 513                         smi_info->curr_msg->data,
 514                         smi_info->curr_msg->data_size);
 515                 smi_info->si_state = SI_GETTING_MESSAGES;
 516         } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
 517                 /* Events available. */
 518                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 519                 if (!smi_info->curr_msg) {
 520                         disable_si_irq(smi_info);
 521                         smi_info->si_state = SI_NORMAL;
 522                         return;
 523                 }
 524                 enable_si_irq(smi_info);
 525
 526                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 527                 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 528                 smi_info->curr_msg->data_size = 2;
 529
 530                 smi_info->handlers->start_transaction(
 531                         smi_info->si_sm,
 532                         smi_info->curr_msg->data,
 533                         smi_info->curr_msg->data_size);
 534                 smi_info->si_state = SI_GETTING_EVENTS;
 535         } else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
 536                    smi_info->oem_data_avail_handler) {
 537                 if (smi_info->oem_data_avail_handler(smi_info))
 538                         goto retry;
 539         } else
 540                 smi_info->si_state = SI_NORMAL;
 541 }
 542
 543 static void handle_transaction_done(struct smi_info *smi_info)
 544 {
 545         struct ipmi_smi_msg *msg;
 546 #ifdef DEBUG_TIMING
 547         struct timeval t;
 548
 549         do_gettimeofday(&t);
 550         printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 551 #endif
 552         switch (smi_info->si_state) {
 553         case SI_NORMAL:
 554                 if (!smi_info->curr_msg)
 555                         break;
 556
 557                 smi_info->curr_msg->rsp_size
 558                         = smi_info->handlers->get_result(
 559                                 smi_info->si_sm,
 560                                 smi_info->curr_msg->rsp,
 561                                 IPMI_MAX_MSG_LENGTH);
 562
 563                 /*
 564                  * Do this here becase deliver_recv_msg() releases the
 565                  * lock, and a new message can be put in during the
 566                  * time the lock is released.
 567                  */
 568                 msg = smi_info->curr_msg;
 569                 smi_info->curr_msg = NULL;
 570                 deliver_recv_msg(smi_info, msg);
 571                 break;
 572
 573         case SI_GETTING_FLAGS:
 574         {
 575                 unsigned char msg[4];
 576                 unsigned int  len;
 577
 578                 /* We got the flags from the SMI, now handle them. */
 579                 len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 580                 if (msg[2] != 0) {
 581                         /* Error fetching flags, just give up for now. */
 582                         smi_info->si_state = SI_NORMAL;
 583                 } else if (len < 4) {
 584                         /*
 585                          * Hmm, no flags.  That's technically illegal, but
 586                          * don't use uninitialized data.
 587                          */
 588                         smi_info->si_state = SI_NORMAL;
 589                 } else {
 590                         smi_info->msg_flags = msg[3];
 591                         handle_flags(smi_info);
 592                 }
 593                 break;
 594         }
 595
 596         case SI_CLEARING_FLAGS:
 597         case SI_CLEARING_FLAGS_THEN_SET_IRQ:
 598         {
 599                 unsigned char msg[3];
 600
 601                 /* We cleared the flags. */
 602                 smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
 603                 if (msg[2] != 0) {
 604                         /* Error clearing flags */
 605                         dev_warn(smi_info->dev,
 606                                  "Error clearing flags: %2.2x\n", msg[2]);
 607                 }
 608                 if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
 609                         start_enable_irq(smi_info);
 610                 else
 611                         smi_info->si_state = SI_NORMAL;
 612                 break;
 613         }
 614
 615         case SI_GETTING_EVENTS:
 616         {
 617                 smi_info->curr_msg->rsp_size
 618                         = smi_info->handlers->get_result(
 619                                 smi_info->si_sm,
 620                                 smi_info->curr_msg->rsp,
 621                                 IPMI_MAX_MSG_LENGTH);
 622
 623                 /*
 624                  * Do this here becase deliver_recv_msg() releases the
 625                  * lock, and a new message can be put in during the
 626                  * time the lock is released.
 627                  */
 628                 msg = smi_info->curr_msg;
 629                 smi_info->curr_msg = NULL;
 630                 if (msg->rsp[2] != 0) {
 631                         /* Error getting event, probably done. */
 632                         msg->done(msg);
 633
 634                         /* Take off the event flag. */
 635                         smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
 636                         handle_flags(smi_info);
 637                 } else {
 638                         smi_inc_stat(smi_info, events);
 639
 640                         /*
 641                          * Do this before we deliver the message
 642                          * because delivering the message releases the
 643                          * lock and something else can mess with the
 644                          * state.
 645                          */
 646                         handle_flags(smi_info);
 647
 648                         deliver_recv_msg(smi_info, msg);
 649                 }
 650                 break;
 651         }
 652
 653         case SI_GETTING_MESSAGES:
 654         {
 655                 smi_info->curr_msg->rsp_size
 656                         = smi_info->handlers->get_result(
 657                                 smi_info->si_sm,
 658                                 smi_info->curr_msg->rsp,
 659                                 IPMI_MAX_MSG_LENGTH);
 660
 661                 /*
 662                  * Do this here becase deliver_recv_msg() releases the
 663                  * lock, and a new message can be put in during the
 664                  * time the lock is released.
 665                  */
 666                 msg = smi_info->curr_msg;
 667                 smi_info->curr_msg = NULL;
 668                 if (msg->rsp[2] != 0) {
 669                         /* Error getting event, probably done. */
 670                         msg->done(msg);
 671
 672                         /* Take off the msg flag. */
 673                         smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
 674                         handle_flags(smi_info);
 675                 } else {
 676                         smi_inc_stat(smi_info, incoming_messages);
 677
 678                         /*
 679                          * Do this before we deliver the message
 680                          * because delivering the message releases the
 681                          * lock and something else can mess with the
 682                          * state.
 683                          */
 684                         handle_flags(smi_info);
 685
 686                         deliver_recv_msg(smi_info, msg);
 687                 }
 688                 break;
 689         }
 690
 691         case SI_ENABLE_INTERRUPTS1:
 692         {
 693                 unsigned char msg[4];
 694
 695                 /* We got the flags from the SMI, now handle them. */
 696                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 697                 if (msg[2] != 0) {
 698                         dev_warn(smi_info->dev, "Could not enable interrupts"
 699                                  ", failed get, using polled mode.\n");
 700                         smi_info->si_state = SI_NORMAL;
 701                 } else {
 702                         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 703                         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
 704                         msg[2] = (msg[3] |
 705                                   IPMI_BMC_RCV_MSG_INTR |
 706                                   IPMI_BMC_EVT_MSG_INTR);
 707                         smi_info->handlers->start_transaction(
 708                                 smi_info->si_sm, msg, 3);
 709                         smi_info->si_state = SI_ENABLE_INTERRUPTS2;
 710                 }
 711                 break;
 712         }
 713
 714         case SI_ENABLE_INTERRUPTS2:
 715         {
 716                 unsigned char msg[4];
 717
 718                 /* We got the flags from the SMI, now handle them. */
 719                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 720                 if (msg[2] != 0)
 721                         dev_warn(smi_info->dev, "Could not enable interrupts"
 722                                  ", failed set, using polled mode.\n");
 723                 else
 724                         smi_info->interrupt_disabled = 0;
 725                 smi_info->si_state = SI_NORMAL;
 726                 break;
 727         }
 728
 729         case SI_DISABLE_INTERRUPTS1:
 730         {
 731                 unsigned char msg[4];
 732
 733                 /* We got the flags from the SMI, now handle them. */
 734                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 735                 if (msg[2] != 0) {
 736                         dev_warn(smi_info->dev, "Could not disable interrupts"
 737                                  ", failed get.\n");
 738                         smi_info->si_state = SI_NORMAL;
 739                 } else {
 740                         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 741                         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
 742                         msg[2] = (msg[3] &
 743                                   ~(IPMI_BMC_RCV_MSG_INTR |
 744                                     IPMI_BMC_EVT_MSG_INTR));
 745                         smi_info->handlers->start_transaction(
 746                                 smi_info->si_sm, msg, 3);
 747                         smi_info->si_state = SI_DISABLE_INTERRUPTS2;
 748                 }
 749                 break;
 750         }
 751
 752         case SI_DISABLE_INTERRUPTS2:
 753         {
 754                 unsigned char msg[4];
 755
 756                 /* We got the flags from the SMI, now handle them. */
 757                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 758                 if (msg[2] != 0) {
 759                         dev_warn(smi_info->dev, "Could not disable interrupts"
 760                                  ", failed set.\n");
 761                 }
 762                 smi_info->si_state = SI_NORMAL;
 763                 break;
 764         }
 765         }
 766 }
 767
 768 /*
 769  * Called on timeouts and events.  Timeouts should pass the elapsed
 770  * time, interrupts should pass in zero.  Must be called with
 771  * si_lock held and interrupts disabled.
 772  */
 773 static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 774                                            int time)
 775 {
 776         enum si_sm_result si_sm_result;
 777
 778  restart:
 779         /*
 780          * There used to be a loop here that waited a little while
 781          * (around 25us) before giving up.  That turned out to be
 782          * pointless, the minimum delays I was seeing were in the 300us
 783          * range, which is far too long to wait in an interrupt.  So
 784          * we just run until the state machine tells us something
 785          * happened or it needs a delay.
 786          */
 787         si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
 788         time = 0;
 789         while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
 790                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 791
 792         if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
 793                 smi_inc_stat(smi_info, complete_transactions);
 794
 795                 handle_transaction_done(smi_info);
 796                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 797         } else if (si_sm_result == SI_SM_HOSED) {
 798                 smi_inc_stat(smi_info, hosed_count);
 799
 800                 /*
 801                  * Do the before return_hosed_msg, because that
 802                  * releases the lock.
 803                  */
 804                 smi_info->si_state = SI_NORMAL;
 805                 if (smi_info->curr_msg != NULL) {
 806                         /*
 807                          * If we were handling a user message, format
 808                          * a response to send to the upper layer to
 809                          * tell it about the error.
 810                          */
 811                         return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
 812                 }
 813                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 814         }
 815
 816         /*
 817          * We prefer handling attn over new messages.  But don't do
 818          * this if there is not yet an upper layer to handle anything.
 819          */
 820         if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
 821                 unsigned char msg[2];
 822
 823                 smi_inc_stat(smi_info, attentions);
 824
 825                 /*
 826                  * Got a attn, send down a get message flags to see
 827                  * what's causing it.  It would be better to handle
 828                  * this in the upper layer, but due to the way
 829                  * interrupts work with the SMI, that's not really
 830                  * possible.
 831                  */
 832                 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 833                 msg[1] = IPMI_GET_MSG_FLAGS_CMD;
 834
 835                 smi_info->handlers->start_transaction(
 836                         smi_info->si_sm, msg, 2);
 837                 smi_info->si_state = SI_GETTING_FLAGS;
 838                 goto restart;
 839         }
 840
 841         /* If we are currently idle, try to start the next message. */
 842         if (si_sm_result == SI_SM_IDLE) {
 843                 smi_inc_stat(smi_info, idles);
 844
 845                 si_sm_result = start_next_msg(smi_info);
 846                 if (si_sm_result != SI_SM_IDLE)
 847                         goto restart;
 848         }
 849
 850         if ((si_sm_result == SI_SM_IDLE)
 851             && (atomic_read(&smi_info->req_events))) {
 852                 /*
 853                  * We are idle and the upper layer requested that I fetch
 854                  * events, so do so.
 855                  */
 856                 atomic_set(&smi_info->req_events, 0);
 857
 858                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 859                 if (!smi_info->curr_msg)
 860                         goto out;
 861
 862                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 863                 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 864                 smi_info->curr_msg->data_size = 2;
 865
 866                 smi_info->handlers->start_transaction(
 867                         smi_info->si_sm,
 868                         smi_info->curr_msg->data,
 869                         smi_info->curr_msg->data_size);
 870                 smi_info->si_state = SI_GETTING_EVENTS;
 871                 goto restart;
 872         }
 873  out:
 874         return si_sm_result;
 875 }
 876
 877 static void sender(void                *send_info,
 878                    struct ipmi_smi_msg *msg,
 879                    int                 priority)
 880 {
 881         struct smi_info   *smi_info = send_info;
 882         enum si_sm_result result;
 883         unsigned long     flags;
 884 #ifdef DEBUG_TIMING
 885         struct timeval    t;
 886 #endif
 887
 888         if (atomic_read(&smi_info->stop_operation)) {
 889                 msg->rsp[0] = msg->data[0] | 4;
 890                 msg->rsp[1] = msg->data[1];
 891                 msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
 892                 msg->rsp_size = 3;
 893                 deliver_recv_msg(smi_info, msg);
 894                 return;
 895         }
 896
 897 #ifdef DEBUG_TIMING
 898         do_gettimeofday(&t);
 899         printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 900 #endif
 901
 902         mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
 903
 904         if (smi_info->thread)
 905                 wake_up_process(smi_info->thread);
 906
 907         if (smi_info->run_to_completion) {
 908                 /*
 909                  * If we are running to completion, then throw it in
 910                  * the list and run transactions until everything is
 911                  * clear.  Priority doesn't matter here.
 912                  */
 913
 914                 /*
 915                  * Run to completion means we are single-threaded, no
 916                  * need for locks.
 917                  */
 918                 list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
 919
 920                 result = smi_event_handler(smi_info, 0);
 921                 while (result != SI_SM_IDLE) {
 922                         udelay(SI_SHORT_TIMEOUT_USEC);
 923                         result = smi_event_handler(smi_info,
 924                                                    SI_SHORT_TIMEOUT_USEC);
 925                 }
 926                 return;
 927         }
 928
 929         spin_lock_irqsave(&smi_info->msg_lock, flags);
 930         if (priority > 0)
 931                 list_add_tail(&msg->link, &smi_info->hp_xmit_msgs);
 932         else
 933                 list_add_tail(&msg->link, &smi_info->xmit_msgs);
 934         spin_unlock_irqrestore(&smi_info->msg_lock, flags);
 935
 936         spin_lock_irqsave(&smi_info->si_lock, flags);
 937         if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
 938                 start_next_msg(smi_info);
 939         spin_unlock_irqrestore(&smi_info->si_lock, flags);
 940 }
 941
 942 static void set_run_to_completion(void *send_info, int i_run_to_completion)
 943 {
 944         struct smi_info   *smi_info = send_info;
 945         enum si_sm_result result;
 946
 947         smi_info->run_to_completion = i_run_to_completion;
 948         if (i_run_to_completion) {
 949                 result = smi_event_handler(smi_info, 0);
 950                 while (result != SI_SM_IDLE) {
 951                         udelay(SI_SHORT_TIMEOUT_USEC);
 952                         result = smi_event_handler(smi_info,
 953                                                    SI_SHORT_TIMEOUT_USEC);
 954                 }
 955         }
 956 }
 957
 958 /*
 959  * Use -1 in the nsec value of the busy waiting timespec to tell that
 960  * we are spinning in kipmid looking for something and not delaying
 961  * between checks
 962  */
 963 static inline void ipmi_si_set_not_busy(struct timespec *ts)
 964 {
 965         ts->tv_nsec = -1;
 966 }
 967 static inline int ipmi_si_is_busy(struct timespec *ts)
 968 {
 969         return ts->tv_nsec != -1;
 970 }
 971
 972 static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 973                                  const struct smi_info *smi_info,
 974                                  struct timespec *busy_until)
 975 {
 976         unsigned int max_busy_us = 0;
 977
 978         if (smi_info->intf_num < num_max_busy_us)
 979                 max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
 980         if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
 981                 ipmi_si_set_not_busy(busy_until);
 982         else if (!ipmi_si_is_busy(busy_until)) {
 983                 getnstimeofday(busy_until);
 984                 timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
 985         } else {
 986                 struct timespec now;
 987                 getnstimeofday(&now);
 988                 if (unlikely(timespec_compare(&now, busy_until) > 0)) {
 989                         ipmi_si_set_not_busy(busy_until);
 990                         return 0;
 991                 }
 992         }
 993         return 1;
 994 }
 995
 996
 997 /*
 998  * A busy-waiting loop for speeding up IPMI operation.
 999  *
1000  * Lousy hardware makes this hard.  This is only enabled for systems
1001  * that are not BT and do not have interrupts.  It starts spinning
1002  * when an operation is complete or until max_busy tells it to stop
1003  * (if that is enabled).  See the paragraph on kimid_max_busy_us in
1004  * Documentation/IPMI.txt for details.
1005  */
1006 static int ipmi_thread(void *data)
1007 {
1008         struct smi_info *smi_info = data;
1009         unsigned long flags;
1010         enum si_sm_result smi_result;
1011         struct timespec busy_until;
1012
1013         ipmi_si_set_not_busy(&busy_until);
1014         set_user_nice(current, 19);
1015         while (!kthread_should_stop()) {
1016                 int busy_wait;
1017
1018                 spin_lock_irqsave(&(smi_info->si_lock), flags);
1019                 smi_result = smi_event_handler(smi_info, 0);
1020                 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1021                 busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
1022                                                   &busy_until);
1023                 if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
1024                         ; /* do nothing */
1025                 else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
1026                         schedule();
1027                 else if (smi_result == SI_SM_IDLE)
1028                         schedule_timeout_interruptible(100);
1029                 else
1030                         schedule_timeout_interruptible(1);
1031         }
1032         return 0;
1033 }
1034
1035
1036 static void poll(void *send_info)
1037 {
1038         struct smi_info *smi_info = send_info;
1039         unsigned long flags;
1040
1041         /*
1042          * Make sure there is some delay in the poll loop so we can
1043          * drive time forward and timeout things.
1044          */
1045         udelay(10);
1046         spin_lock_irqsave(&smi_info->si_lock, flags);
1047         smi_event_handler(smi_info, 10);
1048         spin_unlock_irqrestore(&smi_info->si_lock, flags);
1049 }
1050
1051 static void request_events(void *send_info)
1052 {
1053         struct smi_info *smi_info = send_info;
1054
1055         if (atomic_read(&smi_info->stop_operation) ||
1056                                 !smi_info->has_event_buffer)
1057                 return;
1058
1059         atomic_set(&smi_info->req_events, 1);
1060 }
1061
1062 static int initialized;
1063
1064 static void smi_timeout(unsigned long data)
1065 {
1066         struct smi_info   *smi_info = (struct smi_info *) data;
1067         enum si_sm_result smi_result;
1068         unsigned long     flags;
1069         unsigned long     jiffies_now;
1070         long              time_diff;
1071         long              timeout;
1072 #ifdef DEBUG_TIMING
1073         struct timeval    t;
1074 #endif
1075
1076         spin_lock_irqsave(&(smi_info->si_lock), flags);
1077 #ifdef DEBUG_TIMING
1078         do_gettimeofday(&t);
1079         printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1080 #endif
1081         jiffies_now = jiffies;
1082         time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
1083                      * SI_USEC_PER_JIFFY);
1084         smi_result = smi_event_handler(smi_info, time_diff);
1085
1086         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1087
1088         smi_info->last_timeout_jiffies = jiffies_now;
1089
1090         if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
1091                 /* Running with interrupts, only do long timeouts. */
1092                 timeout = jiffies + SI_TIMEOUT_JIFFIES;
1093                 smi_inc_stat(smi_info, long_timeouts);
1094                 goto do_mod_timer;
1095         }
1096
1097         /*
1098          * If the state machine asks for a short delay, then shorten
1099          * the timer timeout.
1100          */
1101         if (smi_result == SI_SM_CALL_WITH_DELAY) {
1102                 smi_inc_stat(smi_info, short_timeouts);
1103                 timeout = jiffies + 1;
1104         } else {
1105                 smi_inc_stat(smi_info, long_timeouts);
1106                 timeout = jiffies + SI_TIMEOUT_JIFFIES;
1107         }
1108
1109  do_mod_timer:
1110         if (smi_result != SI_SM_IDLE)
1111                 mod_timer(&(smi_info->si_timer), timeout);
1112 }
1113
1114 static irqreturn_t si_irq_handler(int irq, void *data)
1115 {
1116         struct smi_info *smi_info = data;
1117         unsigned long   flags;
1118 #ifdef DEBUG_TIMING
1119         struct timeval  t;
1120 #endif
1121
1122         spin_lock_irqsave(&(smi_info->si_lock), flags);
1123
1124         smi_inc_stat(smi_info, interrupts);
1125
1126 #ifdef DEBUG_TIMING
1127         do_gettimeofday(&t);
1128         printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1129 #endif
1130         smi_event_handler(smi_info, 0);
1131         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1132         return IRQ_HANDLED;
1133 }
1134
1135 static irqreturn_t si_bt_irq_handler(int irq, void *data)
1136 {
1137         struct smi_info *smi_info = data;
1138         /* We need to clear the IRQ flag for the BT interface. */
1139         smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
1140                              IPMI_BT_INTMASK_CLEAR_IRQ_BIT
1141                              | IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1142         return si_irq_handler(irq, data);
1143 }
1144
1145 static int smi_start_processing(void       *send_info,
1146                                 ipmi_smi_t intf)
1147 {
1148         struct smi_info *new_smi = send_info;
1149         int             enable = 0;
1150
1151         new_smi->intf = intf;
1152
1153         /* Try to claim any interrupts. */
1154         if (new_smi->irq_setup)
1155                 new_smi->irq_setup(new_smi);
1156
1157         /* Set up the timer that drives the interface. */
1158         setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
1159         new_smi->last_timeout_jiffies = jiffies;
1160         mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
1161
1162         /*
1163          * Check if the user forcefully enabled the daemon.
1164          */
1165         if (new_smi->intf_num < num_force_kipmid)
1166                 enable = force_kipmid[new_smi->intf_num];
1167         /*
1168          * The BT interface is efficient enough to not need a thread,
1169          * and there is no need for a thread if we have interrupts.
1170          */
1171         else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
1172                 enable = 1;
1173
1174         if (enable) {
1175                 new_smi->thread = kthread_run(ipmi_thread, new_smi,
1176                                               "kipmi%d", new_smi->intf_num);
1177                 if (IS_ERR(new_smi->thread)) {
1178                         dev_notice(new_smi->dev, "Could not start"
1179                                    " kernel thread due to error %ld, only using"
1180                                    " timers to drive the interface\n",
1181                                    PTR_ERR(new_smi->thread));
1182                         new_smi->thread = NULL;
1183                 }
1184         }
1185
1186         return 0;
1187 }
1188
1189 static void set_maintenance_mode(void *send_info, int enable)
1190 {
1191         struct smi_info   *smi_info = send_info;
1192
1193         if (!enable)
1194                 atomic_set(&smi_info->req_events, 0);
1195 }
1196
1197 static struct ipmi_smi_handlers handlers = {
1198         .owner                  = THIS_MODULE,
1199         .start_processing       = smi_start_processing,
1200         .sender                 = sender,
1201         .request_events         = request_events,
1202         .set_maintenance_mode   = set_maintenance_mode,
1203         .set_run_to_completion  = set_run_to_completion,
1204         .poll                   = poll,
1205 };
1206
1207 /*
1208  * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
1209  * a default IO port, and 1 ACPI/SPMI address.  That sets SI_MAX_DRIVERS.
1210  */
1211
1212 static LIST_HEAD(smi_infos);
1213 static DEFINE_MUTEX(smi_infos_lock);
1214 static int smi_num; /* Used to sequence the SMIs */
1215
1216 #define DEFAULT_REGSPACING      1
1217 #define DEFAULT_REGSIZE         1
1218
1219 static int           si_trydefaults = 1;
1220 static char          *si_type[SI_MAX_PARMS];
1221 #define MAX_SI_TYPE_STR 30
1222 static char          si_type_str[MAX_SI_TYPE_STR];
1223 static unsigned long addrs[SI_MAX_PARMS];
1224 static unsigned int num_addrs;
1225 static unsigned int  ports[SI_MAX_PARMS];
1226 static unsigned int num_ports;
1227 static int           irqs[SI_MAX_PARMS];
1228 static unsigned int num_irqs;
1229 static int           regspacings[SI_MAX_PARMS];
1230 static unsigned int num_regspacings;
1231 static int           regsizes[SI_MAX_PARMS];
1232 static unsigned int num_regsizes;
1233 static int           regshifts[SI_MAX_PARMS];
1234 static unsigned int num_regshifts;
1235 static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
1236 static unsigned int num_slave_addrs;
1237
1238 #define IPMI_IO_ADDR_SPACE  0
1239 #define IPMI_MEM_ADDR_SPACE 1
1240 static char *addr_space_to_str[] = { "i/o", "mem" };
1241
1242 static int hotmod_handler(const char *val, struct kernel_param *kp);
1243
1244 module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
1245 MODULE_PARM_DESC(hotmod, "Add and remove interfaces.  See"
1246                  " Documentation/IPMI.txt in the kernel sources for the"
1247                  " gory details.");
1248
1249 module_param_named(trydefaults, si_trydefaults, bool, 0);
1250 MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
1251                  " default scan of the KCS and SMIC interface at the standard"
1252                  " address");
1253 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
1254 MODULE_PARM_DESC(type, "Defines the type of each interface, each"
1255                  " interface separated by commas.  The types are 'kcs',"
1256                  " 'smic', and 'bt'.  For example si_type=kcs,bt will set"
1257                  " the first interface to kcs and the second to bt");
1258 module_param_array(addrs, ulong, &num_addrs, 0);
1259 MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
1260                  " addresses separated by commas.  Only use if an interface"
1261                  " is in memory.  Otherwise, set it to zero or leave"
1262                  " it blank.");
1263 module_param_array(ports, uint, &num_ports, 0);
1264 MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
1265                  " addresses separated by commas.  Only use if an interface"
1266                  " is a port.  Otherwise, set it to zero or leave"
1267                  " it blank.");
1268 module_param_array(irqs, int, &num_irqs, 0);
1269 MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
1270                  " addresses separated by commas.  Only use if an interface"
1271                  " has an interrupt.  Otherwise, set it to zero or leave"
1272                  " it blank.");
1273 module_param_array(regspacings, int, &num_regspacings, 0);
1274 MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
1275                  " and each successive register used by the interface.  For"
1276                  " instance, if the start address is 0xca2 and the spacing"
1277                  " is 2, then the second address is at 0xca4.  Defaults"
1278                  " to 1.");
1279 module_param_array(regsizes, int, &num_regsizes, 0);
1280 MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
1281                  " This should generally be 1, 2, 4, or 8 for an 8-bit,"
1282                  " 16-bit, 32-bit, or 64-bit register.  Use this if you"
1283                  " the 8-bit IPMI register has to be read from a larger"
1284                  " register.");
1285 module_param_array(regshifts, int, &num_regshifts, 0);
1286 MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
1287                  " IPMI register, in bits.  For instance, if the data"
1288                  " is read from a 32-bit word and the IPMI data is in"
1289                  " bit 8-15, then the shift would be 8");
1290 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1291 MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
1292                  " the controller.  Normally this is 0x20, but can be"
1293                  " overridden by this parm.  This is an array indexed"
1294                  " by interface number.");
1295 module_param_array(force_kipmid, int, &num_force_kipmid, 0);
1296 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
1297                  " disabled(0).  Normally the IPMI driver auto-detects"
1298                  " this, but the value may be overridden by this parm.");
1299 module_param(unload_when_empty, int, 0);
1300 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
1301                  " specified or found, default is 1.  Setting to 0"
1302                  " is useful for hot add of devices using hotmod.");
1303 module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
1304 MODULE_PARM_DESC(kipmid_max_busy_us,
1305                  "Max time (in microseconds) to busy-wait for IPMI data before"
1306                  " sleeping. 0 (default) means to wait forever. Set to 100-500"
1307                  " if kipmid is using up a lot of CPU time.");
1308
1309
1310 static void std_irq_cleanup(struct smi_info *info)
1311 {
1312         if (info->si_type == SI_BT)
1313                 /* Disable the interrupt in the BT interface. */
1314                 info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
1315         free_irq(info->irq, info);
1316 }
1317
1318 static int std_irq_setup(struct smi_info *info)
1319 {
1320         int rv;
1321
1322         if (!info->irq)
1323                 return 0;
1324
1325         if (info->si_type == SI_BT) {
1326                 rv = request_irq(info->irq,
1327                                  si_bt_irq_handler,
1328                                  IRQF_SHARED | IRQF_DISABLED,
1329                                  DEVICE_NAME,
1330                                  info);
1331                 if (!rv)
1332                         /* Enable the interrupt in the BT interface. */
1333                         info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
1334                                          IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1335         } else
1336                 rv = request_irq(info->irq,
1337                                  si_irq_handler,
1338                                  IRQF_SHARED | IRQF_DISABLED,
1339                                  DEVICE_NAME,
1340                                  info);
1341         if (rv) {
1342                 dev_warn(info->dev, "%s unable to claim interrupt %d,"
1343                          " running polled\n",
1344                          DEVICE_NAME, info->irq);
1345                 info->irq = 0;
1346         } else {
1347                 info->irq_cleanup = std_irq_cleanup;
1348                 dev_info(info->dev, "Using irq %d\n", info->irq);
1349         }
1350
1351         return rv;
1352 }
1353
1354 static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
1355 {
1356         unsigned int addr = io->addr_data;
1357
1358         return inb(addr + (offset * io->regspacing));
1359 }
1360
1361 static void port_outb(struct si_sm_io *io, unsigned int offset,
1362                       unsigned char b)
1363 {
1364         unsigned int addr = io->addr_data;
1365
1366         outb(b, addr + (offset * io->regspacing));
1367 }
1368
1369 static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
1370 {
1371         unsigned int addr = io->addr_data;
1372
1373         return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
1374 }
1375
1376 static void port_outw(struct si_sm_io *io, unsigned int offset,
1377                       unsigned char b)
1378 {
1379         unsigned int addr = io->addr_data;
1380
1381         outw(b << io->regshift, addr + (offset * io->regspacing));
1382 }
1383
1384 static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
1385 {
1386         unsigned int addr = io->addr_data;
1387
1388         return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
1389 }
1390
1391 static void port_outl(struct si_sm_io *io, unsigned int offset,
1392                       unsigned char b)
1393 {
1394         unsigned int addr = io->addr_data;
1395
1396         outl(b << io->regshift, addr+(offset * io->regspacing));
1397 }
1398
1399 static void port_cleanup(struct smi_info *info)
1400 {
1401         unsigned int addr = info->io.addr_data;
1402         int          idx;
1403
1404         if (addr) {
1405                 for (idx = 0; idx < info->io_size; idx++)
1406                         release_region(addr + idx * info->io.regspacing,
1407                                        info->io.regsize);
1408         }
1409 }
1410
1411 static int port_setup(struct smi_info *info)
1412 {
1413         unsigned int addr = info->io.addr_data;
1414         int          idx;
1415
1416         if (!addr)
1417                 return -ENODEV;
1418
1419         info->io_cleanup = port_cleanup;
1420
1421         /*
1422          * Figure out the actual inb/inw/inl/etc routine to use based
1423          * upon the register size.
1424          */
1425         switch (info->io.regsize) {
1426         case 1:
1427                 info->io.inputb = port_inb;
1428                 info->io.outputb = port_outb;
1429                 break;
1430         case 2:
1431                 info->io.inputb = port_inw;
1432                 info->io.outputb = port_outw;
1433                 break;
1434         case 4:
1435                 info->io.inputb = port_inl;
1436                 info->io.outputb = port_outl;
1437                 break;
1438         default:
1439                 dev_warn(info->dev, "Invalid register size: %d\n",
1440                          info->io.regsize);
1441                 return -EINVAL;
1442         }
1443
1444         /*
1445          * Some BIOSes reserve disjoint I/O regions in their ACPI
1446          * tables.  This causes problems when trying to register the
1447          * entire I/O region.  Therefore we must register each I/O
1448          * port separately.
1449          */
1450         for (idx = 0; idx < info->io_size; idx++) {
1451                 if (request_region(addr + idx * info->io.regspacing,
1452                                    info->io.regsize, DEVICE_NAME) == NULL) {
1453                         /* Undo allocations */
1454                         while (idx--) {
1455                                 release_region(addr + idx * info->io.regspacing,
1456                                                info->io.regsize);
1457                         }
1458                         return -EIO;
1459                 }
1460         }
1461         return 0;
1462 }
1463
1464 static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
1465 {
1466         return readb((io->addr)+(offset * io->regspacing));
1467 }
1468
1469 static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
1470                      unsigned char b)
1471 {
1472         writeb(b, (io->addr)+(offset * io->regspacing));
1473 }
1474
1475 static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
1476 {
1477         return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
1478                 & 0xff;
1479 }
1480
1481 static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
1482                      unsigned char b)
1483 {
1484         writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
1485 }
1486
1487 static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
1488 {
1489         return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
1490                 & 0xff;
1491 }
1492
1493 static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
1494                      unsigned char b)
1495 {
1496         writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
1497 }
1498
1499 #ifdef readq
1500 static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
1501 {
1502         return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
1503                 & 0xff;
1504 }
1505
1506 static void mem_outq(struct si_sm_io *io, unsigned int offset,
1507                      unsigned char b)
1508 {
1509         writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
1510 }
1511 #endif
1512
1513 static void mem_cleanup(struct smi_info *info)
1514 {
1515         unsigned long addr = info->io.addr_data;
1516         int           mapsize;
1517
1518         if (info->io.addr) {
1519                 iounmap(info->io.addr);
1520
1521                 mapsize = ((info->io_size * info->io.regspacing)
1522                            - (info->io.regspacing - info->io.regsize));
1523
1524                 release_mem_region(addr, mapsize);
1525         }
1526 }
1527
1528 static int mem_setup(struct smi_info *info)
1529 {
1530         unsigned long addr = info->io.addr_data;
1531         int           mapsize;
1532
1533         if (!addr)
1534                 return -ENODEV;
1535
1536         info->io_cleanup = mem_cleanup;
1537
1538         /*
1539          * Figure out the actual readb/readw/readl/etc routine to use based
1540          * upon the register size.
1541          */
1542         switch (info->io.regsize) {
1543         case 1:
1544                 info->io.inputb = intf_mem_inb;
1545                 info->io.outputb = intf_mem_outb;
1546                 break;
1547         case 2:
1548                 info->io.inputb = intf_mem_inw;
1549                 info->io.outputb = intf_mem_outw;
1550                 break;
1551         case 4:
1552                 info->io.inputb = intf_mem_inl;
1553                 info->io.outputb = intf_mem_outl;
1554                 break;
1555 #ifdef readq
1556         case 8:
1557                 info->io.inputb = mem_inq;
1558                 info->io.outputb = mem_outq;
1559                 break;
1560 #endif
1561         default:
1562                 dev_warn(info->dev, "Invalid register size: %d\n",
1563                          info->io.regsize);
1564                 return -EINVAL;
1565         }
1566
1567         /*
1568          * Calculate the total amount of memory to claim.  This is an
1569          * unusual looking calculation, but it avoids claiming any
1570          * more memory than it has to.  It will claim everything
1571          * between the first address to the end of the last full
1572          * register.
1573          */
1574         mapsize = ((info->io_size * info->io.regspacing)
1575                    - (info->io.regspacing - info->io.regsize));
1576
1577         if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL)
1578                 return -EIO;
1579
1580         info->io.addr = ioremap(addr, mapsize);
1581         if (info->io.addr == NULL) {
1582                 release_mem_region(addr, mapsize);
1583                 return -EIO;
1584         }
1585         return 0;
1586 }
1587
1588 /*
1589  * Parms come in as <op1>[:op2[:op3...]].  ops are:
1590  *   add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
1591  * Options are:
1592  *   rsp=<regspacing>
1593  *   rsi=<regsize>
1594  *   rsh=<regshift>
1595  *   irq=<irq>
1596  *   ipmb=<ipmb addr>
1597  */
1598 enum hotmod_op { HM_ADD, HM_REMOVE };
1599 struct hotmod_vals {
1600         char *name;
1601         int  val;
1602 };
1603 static struct hotmod_vals hotmod_ops[] = {
1604         { "add",        HM_ADD },
1605         { "remove",     HM_REMOVE },
1606         { NULL }
1607 };
1608 static struct hotmod_vals hotmod_si[] = {
1609         { "kcs",        SI_KCS },
1610         { "smic",       SI_SMIC },
1611         { "bt",         SI_BT },
1612         { NULL }
1613 };
1614 static struct hotmod_vals hotmod_as[] = {
1615         { "mem",        IPMI_MEM_ADDR_SPACE },
1616         { "i/o",        IPMI_IO_ADDR_SPACE },
1617         { NULL }
1618 };
1619
1620 static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr)
1621 {
1622         char *s;
1623         int  i;
1624
1625         s = strchr(*curr, ',');
1626         if (!s) {
1627                 printk(KERN_WARNING PFX "No hotmod %s given.\n", name);
1628                 return -EINVAL;
1629         }
1630         *s = '\0';
1631         s++;
1632         for (i = 0; hotmod_ops[i].name; i++) {
1633                 if (strcmp(*curr, v[i].name) == 0) {
1634                         *val = v[i].val;
1635                         *curr = s;
1636                         return 0;
1637                 }
1638         }
1639
1640         printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr);
1641         return -EINVAL;
1642 }
1643
1644 static int check_hotmod_int_op(const char *curr, const char *option,
1645                                const char *name, int *val)
1646 {
1647         char *n;
1648
1649         if (strcmp(curr, name) == 0) {
1650                 if (!option) {
1651                         printk(KERN_WARNING PFX
1652                                "No option given for '%s'\n",
1653                                curr);
1654                         return -EINVAL;
1655                 }
1656                 *val = simple_strtoul(option, &n, 0);
1657                 if ((*n != '\0') || (*option == '\0')) {
1658                         printk(KERN_WARNING PFX
1659                                "Bad option given for '%s'\n",
1660                                curr);
1661                         return -EINVAL;
1662                 }
1663                 return 1;
1664         }
1665         return 0;
1666 }
1667
1668 static int hotmod_handler(const char *val, struct kernel_param *kp)
1669 {
1670         char *str = kstrdup(val, GFP_KERNEL);
1671         int  rv;
1672         char *next, *curr, *s, *n, *o;
1673         enum hotmod_op op;
1674         enum si_type si_type;
1675         int  addr_space;
1676         unsigned long addr;
1677         int regspacing;
1678         int regsize;
1679         int regshift;
1680         int irq;
1681         int ipmb;
1682         int ival;
1683         int len;
1684         struct smi_info *info;
1685
1686         if (!str)
1687                 return -ENOMEM;
1688
1689         /* Kill any trailing spaces, as we can get a "\n" from echo. */
1690         len = strlen(str);
1691         ival = len - 1;
1692         while ((ival >= 0) && isspace(str[ival])) {
1693                 str[ival] = '\0';
1694                 ival--;
1695         }
1696
1697         for (curr = str; curr; curr = next) {
1698                 regspacing = 1;
1699                 regsize = 1;
1700                 regshift = 0;
1701                 irq = 0;
1702                 ipmb = 0; /* Choose the default if not specified */
1703
1704                 next = strchr(curr, ':');
1705                 if (next) {
1706                         *next = '\0';
1707                         next++;
1708                 }
1709
1710                 rv = parse_str(hotmod_ops, &ival, "operation", &curr);
1711                 if (rv)
1712                         break;
1713                 op = ival;
1714
1715                 rv = parse_str(hotmod_si, &ival, "interface type", &curr);
1716                 if (rv)
1717                         break;
1718                 si_type = ival;
1719
1720                 rv = parse_str(hotmod_as, &addr_space, "address space", &curr);
1721                 if (rv)
1722                         break;
1723
1724                 s = strchr(curr, ',');
1725                 if (s) {
1726                         *s = '\0';
1727                         s++;
1728                 }
1729                 addr = simple_strtoul(curr, &n, 0);
1730                 if ((*n != '\0') || (*curr == '\0')) {
1731                         printk(KERN_WARNING PFX "Invalid hotmod address"
1732                                " '%s'\n", curr);
1733                         break;
1734                 }
1735
1736                 while (s) {
1737                         curr = s;
1738                         s = strchr(curr, ',');
1739                         if (s) {
1740                                 *s = '\0';
1741                                 s++;
1742                         }
1743                         o = strchr(curr, '=');
1744                         if (o) {
1745                                 *o = '\0';
1746                                 o++;
1747                         }
1748                         rv = check_hotmod_int_op(curr, o, "rsp", &regspacing);
1749                         if (rv < 0)
1750                                 goto out;
1751                         else if (rv)
1752                                 continue;
1753                         rv = check_hotmod_int_op(curr, o, "rsi", &regsize);
1754                         if (rv < 0)
1755                                 goto out;
1756                         else if (rv)
1757                                 continue;
1758                         rv = check_hotmod_int_op(curr, o, "rsh", &regshift);
1759                         if (rv < 0)
1760                                 goto out;
1761                         else if (rv)
1762                                 continue;
1763                         rv = check_hotmod_int_op(curr, o, "irq", &irq);
1764                         if (rv < 0)
1765                                 goto out;
1766                         else if (rv)
1767                                 continue;
1768                         rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
1769                         if (rv < 0)
1770                                 goto out;
1771                         else if (rv)
1772                                 continue;
1773
1774                         rv = -EINVAL;
1775                         printk(KERN_WARNING PFX
1776                                "Invalid hotmod option '%s'\n",
1777                                curr);
1778                         goto out;
1779                 }
1780
1781                 if (op == HM_ADD) {
1782                         info = kzalloc(sizeof(*info), GFP_KERNEL);
1783                         if (!info) {
1784                                 rv = -ENOMEM;
1785                                 goto out;
1786                         }
1787
1788                         info->addr_source = SI_HOTMOD;
1789                         info->si_type = si_type;
1790                         info->io.addr_data = addr;
1791                         info->io.addr_type = addr_space;
1792                         if (addr_space == IPMI_MEM_ADDR_SPACE)
1793                                 info->io_setup = mem_setup;
1794                         else
1795                                 info->io_setup = port_setup;
1796
1797                         info->io.addr = NULL;
1798                         info->io.regspacing = regspacing;
1799                         if (!info->io.regspacing)
1800                                 info->io.regspacing = DEFAULT_REGSPACING;
1801                         info->io.regsize = regsize;
1802                         if (!info->io.regsize)
1803                                 info->io.regsize = DEFAULT_REGSPACING;
1804                         info->io.regshift = regshift;
1805                         info->irq = irq;
1806                         if (info->irq)
1807                                 info->irq_setup = std_irq_setup;
1808                         info->slave_addr = ipmb;
1809
1810                         if (!add_smi(info)) {
1811                                 if (try_smi_init(info))
1812                                         cleanup_one_si(info);
1813                         } else {
1814                                 kfree(info);
1815                         }
1816                 } else {
1817                         /* remove */
1818                         struct smi_info *e, *tmp_e;
1819
1820                         mutex_lock(&smi_infos_lock);
1821                         list_for_each_entry_safe(e, tmp_e, &smi_infos, link) {
1822                                 if (e->io.addr_type != addr_space)
1823                                         continue;
1824                                 if (e->si_type != si_type)
1825                                         continue;
1826                                 if (e->io.addr_data == addr)
1827                                         cleanup_one_si(e);
1828                         }
1829                         mutex_unlock(&smi_infos_lock);
1830                 }
1831         }
1832         rv = len;
1833  out:
1834         kfree(str);
1835         return rv;
1836 }
1837
1838 static __devinit void hardcode_find_bmc(void)
1839 {
1840         int             i;
1841         struct smi_info *info;
1842
1843         for (i = 0; i < SI_MAX_PARMS; i++) {
1844                 if (!ports[i] && !addrs[i])
1845                         continue;
1846
1847                 info = kzalloc(sizeof(*info), GFP_KERNEL);
1848                 if (!info)
1849                         return;
1850
1851                 info->addr_source = SI_HARDCODED;
1852                 printk(KERN_INFO PFX "probing via hardcoded address\n");
1853
1854                 if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
1855                         info->si_type = SI_KCS;
1856                 } else if (strcmp(si_type[i], "smic") == 0) {
1857                         info->si_type = SI_SMIC;
1858                 } else if (strcmp(si_type[i], "bt") == 0) {
1859                         info->si_type = SI_BT;
1860                 } else {
1861                         printk(KERN_WARNING PFX "Interface type specified "
1862                                "for interface %d, was invalid: %s\n",
1863                                i, si_type[i]);
1864                         kfree(info);
1865                         continue;
1866                 }
1867
1868                 if (ports[i]) {
1869                         /* An I/O port */
1870                         info->io_setup = port_setup;
1871                         info->io.addr_data = ports[i];
1872                         info->io.addr_type = IPMI_IO_ADDR_SPACE;
1873                 } else if (addrs[i]) {
1874                         /* A memory port */
1875                         info->io_setup = mem_setup;
1876                         info->io.addr_data = addrs[i];
1877                         info->io.addr_type = IPMI_MEM_ADDR_SPACE;
1878                 } else {
1879                         printk(KERN_WARNING PFX "Interface type specified "
1880                                "for interface %d, but port and address were "
1881                                "not set or set to zero.\n", i);
1882                         kfree(info);
1883                         continue;
1884                 }
1885
1886                 info->io.addr = NULL;
1887                 info->io.regspacing = regspacings[i];
1888                 if (!info->io.regspacing)
1889                         info->io.regspacing = DEFAULT_REGSPACING;
1890                 info->io.regsize = regsizes[i];
1891                 if (!info->io.regsize)
1892                         info->io.regsize = DEFAULT_REGSPACING;
1893                 info->io.regshift = regshifts[i];
1894                 info->irq = irqs[i];
1895                 if (info->irq)
1896                         info->irq_setup = std_irq_setup;
1897                 info->slave_addr = slave_addrs[i];
1898
1899                 if (!add_smi(info)) {
1900                         if (try_smi_init(info))
1901                                 cleanup_one_si(info);
1902                 } else {
1903                         kfree(info);
1904                 }
1905         }
1906 }
1907
1908 #ifdef CONFIG_ACPI
1909
1910 #include <linux/acpi.h>
1911
1912 /*
1913  * Once we get an ACPI failure, we don't try any more, because we go
1914  * through the tables sequentially.  Once we don't find a table, there
1915  * are no more.
1916  */
1917 static int acpi_failure;
1918
1919 /* For GPE-type interrupts. */
1920 static u32 ipmi_acpi_gpe(void *context)
1921 {
1922         struct smi_info *smi_info = context;
1923         unsigned long   flags;
1924 #ifdef DEBUG_TIMING
1925         struct timeval t;
1926 #endif
1927
1928         spin_lock_irqsave(&(smi_info->si_lock), flags);
1929
1930         smi_inc_stat(smi_info, interrupts);
1931
1932 #ifdef DEBUG_TIMING
1933         do_gettimeofday(&t);
1934         printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1935 #endif
1936         smi_event_handler(smi_info, 0);
1937         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1938
1939         return ACPI_INTERRUPT_HANDLED;
1940 }
1941
1942 static void acpi_gpe_irq_cleanup(struct smi_info *info)
1943 {
1944         if (!info->irq)
1945                 return;
1946
1947         acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
1948 }
1949
1950 static int acpi_gpe_irq_setup(struct smi_info *info)
1951 {
1952         acpi_status status;
1953
1954         if (!info->irq)
1955                 return 0;
1956
1957         /* FIXME - is level triggered right? */
1958         status = acpi_install_gpe_handler(NULL,
1959                                           info->irq,
1960                                           ACPI_GPE_LEVEL_TRIGGERED,
1961                                           &ipmi_acpi_gpe,
1962                                           info);
1963         if (status != AE_OK) {
1964                 dev_warn(info->dev, "%s unable to claim ACPI GPE %d,"
1965                          " running polled\n", DEVICE_NAME, info->irq);
1966                 info->irq = 0;
1967                 return -EINVAL;
1968         } else {
1969                 info->irq_cleanup = acpi_gpe_irq_cleanup;
1970                 dev_info(info->dev, "Using ACPI GPE %d\n", info->irq);
1971                 return 0;
1972         }
1973 }
1974
1975 /*
1976  * Defined at
1977  * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
1978  */
1979 struct SPMITable {
1980         s8      Signature[4];
1981         u32     Length;
1982         u8      Revision;
1983         u8      Checksum;
1984         s8      OEMID[6];
1985         s8      OEMTableID[8];
1986         s8      OEMRevision[4];
1987         s8      CreatorID[4];
1988         s8      CreatorRevision[4];
1989         u8      InterfaceType;
1990         u8      IPMIlegacy;
1991         s16     SpecificationRevision;
1992
1993         /*
1994          * Bit 0 - SCI interrupt supported
1995          * Bit 1 - I/O APIC/SAPIC
1996          */
1997         u8      InterruptType;
1998
1999         /*
2000          * If bit 0 of InterruptType is set, then this is the SCI
2001          * interrupt in the GPEx_STS register.
2002          */
2003         u8      GPE;
2004
2005         s16     Reserved;
2006
2007         /*
2008          * If bit 1 of InterruptType is set, then this is the I/O
2009          * APIC/SAPIC interrupt.
2010          */
2011         u32     GlobalSystemInterrupt;
2012
2013         /* The actual register address. */
2014         struct acpi_generic_address addr;
2015
2016         u8      UID[4];
2017
2018         s8      spmi_id[1]; /* A '\0' terminated array starts here. */
2019 };
2020
2021 static __devinit int try_init_spmi(struct SPMITable *spmi)
2022 {
2023         struct smi_info  *info;
2024
2025         if (spmi->IPMIlegacy != 1) {
2026                 printk(KERN_INFO PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy);
2027                 return -ENODEV;
2028         }
2029
2030         info = kzalloc(sizeof(*info), GFP_KERNEL);
2031         if (!info) {
2032                 printk(KERN_ERR PFX "Could not allocate SI data (3)\n");
2033                 return -ENOMEM;
2034         }
2035
2036         info->addr_source = SI_SPMI;
2037         printk(KERN_INFO PFX "probing via SPMI\n");
2038
2039         /* Figure out the interface type. */
2040         switch (spmi->InterfaceType) {
2041         case 1: /* KCS */
2042                 info->si_type = SI_KCS;
2043                 break;
2044         case 2: /* SMIC */
2045                 info->si_type = SI_SMIC;
2046                 break;
2047         case 3: /* BT */
2048                 info->si_type = SI_BT;
2049                 break;
2050         default:
2051                 printk(KERN_INFO PFX "Unknown ACPI/SPMI SI type %d\n",
2052                        spmi->InterfaceType);
2053                 kfree(info);
2054                 return -EIO;
2055         }
2056
2057         if (spmi->InterruptType & 1) {
2058                 /* We've got a GPE interrupt. */
2059                 info->irq = spmi->GPE;
2060                 info->irq_setup = acpi_gpe_irq_setup;
2061         } else if (spmi->InterruptType & 2) {
2062                 /* We've got an APIC/SAPIC interrupt. */
2063                 info->irq = spmi->GlobalSystemInterrupt;
2064                 info->irq_setup = std_irq_setup;
2065         } else {
2066                 /* Use the default interrupt setting. */
2067                 info->irq = 0;
2068                 info->irq_setup = NULL;
2069         }
2070
2071         if (spmi->addr.bit_width) {
2072                 /* A (hopefully) properly formed register bit width. */
2073                 info->io.regspacing = spmi->addr.bit_width / 8;
2074         } else {
2075                 info->io.regspacing = DEFAULT_REGSPACING;
2076         }
2077         info->io.regsize = info->io.regspacing;
2078         info->io.regshift = spmi->addr.bit_offset;
2079
2080         if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
2081                 info->io_setup = mem_setup;
2082                 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2083         } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
2084                 info->io_setup = port_setup;
2085                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2086         } else {
2087                 kfree(info);
2088                 printk(KERN_WARNING PFX "Unknown ACPI I/O Address type\n");
2089                 return -EIO;
2090         }
2091         info->io.addr_data = spmi->addr.address;
2092
2093         pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
2094                  (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
2095                  info->io.addr_data, info->io.regsize, info->io.regspacing,
2096                  info->irq);
2097
2098         if (add_smi(info))
2099                 kfree(info);
2100
2101         return 0;
2102 }
2103
2104 static __devinit void spmi_find_bmc(void)
2105 {
2106         acpi_status      status;
2107         struct SPMITable *spmi;
2108         int              i;
2109
2110         if (acpi_disabled)
2111                 return;
2112
2113         if (acpi_failure)
2114                 return;
2115
2116         for (i = 0; ; i++) {
2117                 status = acpi_get_table(ACPI_SIG_SPMI, i+1,
2118                                         (struct acpi_table_header **)&spmi);
2119                 if (status != AE_OK)
2120                         return;
2121
2122                 try_init_spmi(spmi);
2123         }
2124 }
2125
2126 static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
2127                                     const struct pnp_device_id *dev_id)
2128 {
2129         struct acpi_device *acpi_dev;
2130         struct smi_info *info;
2131         struct resource *res, *res_second;
2132         acpi_handle handle;
2133         acpi_status status;
2134         unsigned long long tmp;
2135
2136         acpi_dev = pnp_acpi_device(dev);
2137         if (!acpi_dev)
2138                 return -ENODEV;
2139
2140         info = kzalloc(sizeof(*info), GFP_KERNEL);
2141         if (!info)
2142                 return -ENOMEM;
2143
2144         info->addr_source = SI_ACPI;
2145         printk(KERN_INFO PFX "probing via ACPI\n");
2146
2147         handle = acpi_dev->handle;
2148
2149         /* _IFT tells us the interface type: KCS, BT, etc */
2150         status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
2151         if (ACPI_FAILURE(status))
2152                 goto err_free;
2153
2154         switch (tmp) {
2155         case 1:
2156                 info->si_type = SI_KCS;
2157                 break;
2158         case 2:
2159                 info->si_type = SI_SMIC;
2160                 break;
2161         case 3:
2162                 info->si_type = SI_BT;
2163                 break;
2164         default:
2165                 dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
2166                 goto err_free;
2167         }
2168
2169         res = pnp_get_resource(dev, IORESOURCE_IO, 0);
2170         if (res) {
2171                 info->io_setup = port_setup;
2172                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2173         } else {
2174                 res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
2175                 if (res) {
2176                         info->io_setup = mem_setup;
2177                         info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2178                 }
2179         }
2180         if (!res) {
2181                 dev_err(&dev->dev, "no I/O or memory address\n");
2182                 goto err_free;
2183         }
2184         info->io.addr_data = res->start;
2185
2186         info->io.regspacing = DEFAULT_REGSPACING;
2187         res_second = pnp_get_resource(dev,
2188                                (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
2189                                         IORESOURCE_IO : IORESOURCE_MEM,
2190                                1);
2191         if (res_second) {
2192                 if (res_second->start > info->io.addr_data)
2193                         info->io.regspacing = res_second->start - info->io.addr_data;
2194         }
2195         info->io.regsize = DEFAULT_REGSPACING;
2196         info->io.regshift = 0;
2197
2198         /* If _GPE exists, use it; otherwise use standard interrupts */
2199         status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
2200         if (ACPI_SUCCESS(status)) {
2201                 info->irq = tmp;
2202                 info->irq_setup = acpi_gpe_irq_setup;
2203         } else if (pnp_irq_valid(dev, 0)) {
2204                 info->irq = pnp_irq(dev, 0);
2205                 info->irq_setup = std_irq_setup;
2206         }
2207
2208         info->dev = &dev->dev;
2209         pnp_set_drvdata(dev, info);
2210
2211         dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
2212                  res, info->io.regsize, info->io.regspacing,
2213                  info->irq);
2214
2215         if (add_smi(info))
2216                 goto err_free;
2217
2218         return 0;
2219
2220 err_free:
2221         kfree(info);
2222         return -EINVAL;
2223 }
2224
2225 static void __devexit ipmi_pnp_remove(struct pnp_dev *dev)
2226 {
2227         struct smi_info *info = pnp_get_drvdata(dev);
2228
2229         cleanup_one_si(info);
2230 }
2231
2232 static const struct pnp_device_id pnp_dev_table[] = {
2233         {"IPI0001", 0},
2234         {"", 0},
2235 };
2236
2237 static struct pnp_driver ipmi_pnp_driver = {
2238         .name           = DEVICE_NAME,
2239         .probe          = ipmi_pnp_probe,
2240         .remove         = __devexit_p(ipmi_pnp_remove),
2241         .id_table       = pnp_dev_table,
2242 };
2243 #endif
2244
2245 #ifdef CONFIG_DMI
2246 struct dmi_ipmi_data {
2247         u8              type;
2248         u8              addr_space;
2249         unsigned long   base_addr;
2250         u8              irq;
2251         u8              offset;
2252         u8              slave_addr;
2253 };
2254
2255 static int __devinit decode_dmi(const struct dmi_header *dm,
2256                                 struct dmi_ipmi_data *dmi)
2257 {
2258         const u8        *data = (const u8 *)dm;
2259         unsigned long   base_addr;
2260         u8              reg_spacing;
2261         u8              len = dm->length;
2262
2263         dmi->type = data[4];
2264
2265         memcpy(&base_addr, data+8, sizeof(unsigned long));
2266         if (len >= 0x11) {
2267                 if (base_addr & 1) {
2268                         /* I/O */
2269                         base_addr &= 0xFFFE;
2270                         dmi->addr_space = IPMI_IO_ADDR_SPACE;
2271                 } else
2272                         /* Memory */
2273                         dmi->addr_space = IPMI_MEM_ADDR_SPACE;
2274
2275                 /* If bit 4 of byte 0x10 is set, then the lsb for the address
2276                    is odd. */
2277                 dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
2278
2279                 dmi->irq = data[0x11];
2280
2281                 /* The top two bits of byte 0x10 hold the register spacing. */
2282                 reg_spacing = (data[0x10] & 0xC0) >> 6;
2283                 switch (reg_spacing) {
2284                 case 0x00: /* Byte boundaries */
2285                     dmi->offset = 1;
2286                     break;
2287                 case 0x01: /* 32-bit boundaries */
2288                     dmi->offset = 4;
2289                     break;
2290                 case 0x02: /* 16-byte boundaries */
2291                     dmi->offset = 16;
2292                     break;
2293                 default:
2294                     /* Some other interface, just ignore it. */
2295                     return -EIO;
2296                 }
2297         } else {
2298                 /* Old DMI spec. */
2299                 /*
2300                  * Note that technically, the lower bit of the base
2301                  * address should be 1 if the address is I/O and 0 if
2302                  * the address is in memory.  So many systems get that
2303                  * wrong (and all that I have seen are I/O) so we just
2304                  * ignore that bit and assume I/O.  Systems that use
2305                  * memory should use the newer spec, anyway.
2306                  */
2307                 dmi->base_addr = base_addr & 0xfffe;
2308                 dmi->addr_space = IPMI_IO_ADDR_SPACE;
2309                 dmi->offset = 1;
2310         }
2311
2312         dmi->slave_addr = data[6];
2313
2314         return 0;
2315 }
2316
2317 static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
2318 {
2319         struct smi_info *info;
2320
2321         info = kzalloc(sizeof(*info), GFP_KERNEL);
2322         if (!info) {
2323                 printk(KERN_ERR PFX "Could not allocate SI data\n");
2324                 return;
2325         }
2326
2327         info->addr_source = SI_SMBIOS;
2328         printk(KERN_INFO PFX "probing via SMBIOS\n");
2329
2330         switch (ipmi_data->type) {
2331         case 0x01: /* KCS */
2332                 info->si_type = SI_KCS;
2333                 break;
2334         case 0x02: /* SMIC */
2335                 info->si_type = SI_SMIC;
2336                 break;
2337         case 0x03: /* BT */
2338                 info->si_type = SI_BT;
2339                 break;
2340         default:
2341                 kfree(info);
2342                 return;
2343         }
2344
2345         switch (ipmi_data->addr_space) {
2346         case IPMI_MEM_ADDR_SPACE:
2347                 info->io_setup = mem_setup;
2348                 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2349                 break;
2350
2351         case IPMI_IO_ADDR_SPACE:
2352                 info->io_setup = port_setup;
2353                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2354                 break;
2355
2356         default:
2357                 kfree(info);
2358                 printk(KERN_WARNING PFX "Unknown SMBIOS I/O Address type: %d\n",
2359                        ipmi_data->addr_space);
2360                 return;
2361         }
2362         info->io.addr_data = ipmi_data->base_addr;
2363
2364         info->io.regspacing = ipmi_data->offset;
2365         if (!info->io.regspacing)
2366                 info->io.regspacing = DEFAULT_REGSPACING;
2367         info->io.regsize = DEFAULT_REGSPACING;
2368         info->io.regshift = 0;
2369
2370         info->slave_addr = ipmi_data->slave_addr;
2371
2372         info->irq = ipmi_data->irq;
2373         if (info->irq)
2374                 info->irq_setup = std_irq_setup;
2375
2376         pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
2377                  (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
2378                  info->io.addr_data, info->io.regsize, info->io.regspacing,
2379                  info->irq);
2380
2381         if (add_smi(info))
2382                 kfree(info);
2383 }
2384
2385 static void __devinit dmi_find_bmc(void)
2386 {
2387         const struct dmi_device *dev = NULL;
2388         struct dmi_ipmi_data data;
2389         int                  rv;
2390
2391         while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
2392                 memset(&data, 0, sizeof(data));
2393                 rv = decode_dmi((const struct dmi_header *) dev->device_data,
2394                                 &data);
2395                 if (!rv)
2396                         try_init_dmi(&data);
2397         }
2398 }
2399 #endif /* CONFIG_DMI */
2400
2401 #ifdef CONFIG_PCI
2402
2403 #define PCI_ERMC_CLASSCODE              0x0C0700
2404 #define PCI_ERMC_CLASSCODE_MASK         0xffffff00
2405 #define PCI_ERMC_CLASSCODE_TYPE_MASK    0xff
2406 #define PCI_ERMC_CLASSCODE_TYPE_SMIC    0x00
2407 #define PCI_ERMC_CLASSCODE_TYPE_KCS     0x01
2408 #define PCI_ERMC_CLASSCODE_TYPE_BT      0x02
2409
2410 #define PCI_HP_VENDOR_ID    0x103C
2411 #define PCI_MMC_DEVICE_ID   0x121A
2412 #define PCI_MMC_ADDR_CW     0x10
2413
2414 static void ipmi_pci_cleanup(struct smi_info *info)
2415 {
2416         struct pci_dev *pdev = info->addr_source_data;
2417
2418         pci_disable_device(pdev);
2419 }
2420
2421 static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
2422                                     const struct pci_device_id *ent)
2423 {
2424         int rv;
2425         int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
2426         struct smi_info *info;
2427
2428         info = kzalloc(sizeof(*info), GFP_KERNEL);
2429         if (!info)
2430                 return -ENOMEM;
2431
2432         info->addr_source = SI_PCI;
2433         dev_info(&pdev->dev, "probing via PCI");
2434
2435         switch (class_type) {
2436         case PCI_ERMC_CLASSCODE_TYPE_SMIC:
2437                 info->si_type = SI_SMIC;
2438                 break;
2439
2440         case PCI_ERMC_CLASSCODE_TYPE_KCS:
2441                 info->si_type = SI_KCS;
2442                 break;
2443
2444         case PCI_ERMC_CLASSCODE_TYPE_BT:
2445                 info->si_type = SI_BT;
2446                 break;
2447
2448         default:
2449                 kfree(info);
2450                 dev_info(&pdev->dev, "Unknown IPMI type: %d\n", class_type);
2451                 return -ENOMEM;
2452         }
2453
2454         rv = pci_enable_device(pdev);
2455         if (rv) {
2456                 dev_err(&pdev->dev, "couldn't enable PCI device\n");
2457                 kfree(info);
2458                 return rv;
2459         }
2460
2461         info->addr_source_cleanup = ipmi_pci_cleanup;
2462         info->addr_source_data = pdev;
2463
2464         if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
2465                 info->io_setup = port_setup;
2466                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2467         } else {
2468                 info->io_setup = mem_setup;
2469                 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2470         }
2471         info->io.addr_data = pci_resource_start(pdev, 0);
2472
2473         info->io.regspacing = DEFAULT_REGSPACING;
2474         info->io.regsize = DEFAULT_REGSPACING;
2475         info->io.regshift = 0;
2476
2477         info->irq = pdev->irq;
2478         if (info->irq)
2479                 info->irq_setup = std_irq_setup;
2480
2481         info->dev = &pdev->dev;
2482         pci_set_drvdata(pdev, info);
2483
2484         dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n",
2485                 &pdev->resource[0], info->io.regsize, info->io.regspacing,
2486                 info->irq);
2487
2488         if (add_smi(info))
2489                 kfree(info);
2490
2491         return 0;
2492 }
2493
2494 static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
2495 {
2496         struct smi_info *info = pci_get_drvdata(pdev);
2497         cleanup_one_si(info);
2498 }
2499
2500 #ifdef CONFIG_PM
2501 static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
2502 {
2503         return 0;
2504 }
2505
2506 static int ipmi_pci_resume(struct pci_dev *pdev)
2507 {
2508         return 0;
2509 }
2510 #endif
2511
2512 static struct pci_device_id ipmi_pci_devices[] = {
2513         { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
2514         { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
2515         { 0, }
2516 };
2517 MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
2518
2519 static struct pci_driver ipmi_pci_driver = {
2520         .name =         DEVICE_NAME,
2521         .id_table =     ipmi_pci_devices,
2522         .probe =        ipmi_pci_probe,
2523         .remove =       __devexit_p(ipmi_pci_remove),
2524 #ifdef CONFIG_PM
2525         .suspend =      ipmi_pci_suspend,
2526         .resume =       ipmi_pci_resume,
2527 #endif
2528 };
2529 #endif /* CONFIG_PCI */
2530
2531
2532 #ifdef CONFIG_PPC_OF
2533 static int __devinit ipmi_of_probe(struct platform_device *dev,
2534                          const struct of_device_id *match)
2535 {
2536         struct smi_info *info;
2537         struct resource resource;
2538         const int *regsize, *regspacing, *regshift;
2539         struct device_node *np = dev->dev.of_node;
2540         int ret;
2541         int proplen;
2542
2543         dev_info(&dev->dev, "probing via device tree\n");
2544
2545         ret = of_address_to_resource(np, 0, &resource);
2546         if (ret) {
2547                 dev_warn(&dev->dev, PFX "invalid address from OF\n");
2548                 return ret;
2549         }
2550
2551         regsize = of_get_property(np, "reg-size", &proplen);
2552         if (regsize && proplen != 4) {
2553                 dev_warn(&dev->dev, PFX "invalid regsize from OF\n");
2554                 return -EINVAL;
2555         }
2556
2557         regspacing = of_get_property(np, "reg-spacing", &proplen);
2558         if (regspacing && proplen != 4) {
2559                 dev_warn(&dev->dev, PFX "invalid regspacing from OF\n");
2560                 return -EINVAL;
2561         }
2562
2563         regshift = of_get_property(np, "reg-shift", &proplen);
2564         if (regshift && proplen != 4) {
2565                 dev_warn(&dev->dev, PFX "invalid regshift from OF\n");
2566                 return -EINVAL;
2567         }
2568
2569         info = kzalloc(sizeof(*info), GFP_KERNEL);
2570
2571         if (!info) {
2572                 dev_err(&dev->dev,
2573                         "could not allocate memory for OF probe\n");
2574                 return -ENOMEM;
2575         }
2576
2577         info->si_type           = (enum si_type) match->data;
2578         info->addr_source       = SI_DEVICETREE;
2579         info->irq_setup         = std_irq_setup;
2580
2581         if (resource.flags & IORESOURCE_IO) {
2582                 info->io_setup          = port_setup;
2583                 info->io.addr_type      = IPMI_IO_ADDR_SPACE;
2584         } else {
2585                 info->io_setup          = mem_setup;
2586                 info->io.addr_type      = IPMI_MEM_ADDR_SPACE;
2587         }
2588
2589         info->io.addr_data      = resource.start;
2590
2591         info->io.regsize        = regsize ? *regsize : DEFAULT_REGSIZE;
2592         info->io.regspacing     = regspacing ? *regspacing : DEFAULT_REGSPACING;
2593         info->io.regshift       = regshift ? *regshift : 0;
2594
2595         info->irq               = irq_of_parse_and_map(dev->dev.of_node, 0);
2596         info->dev               = &dev->dev;
2597
2598         dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %d\n",
2599                 info->io.addr_data, info->io.regsize, info->io.regspacing,
2600                 info->irq);
2601
2602         dev_set_drvdata(&dev->dev, info);
2603
2604         if (add_smi(info)) {
2605                 kfree(info);
2606                 return -EBUSY;
2607         }
2608
2609         return 0;
2610 }
2611
2612 static int __devexit ipmi_of_remove(struct platform_device *dev)
2613 {
2614         cleanup_one_si(dev_get_drvdata(&dev->dev));
2615         return 0;
2616 }
2617
2618 static struct of_device_id ipmi_match[] =
2619 {
2620         { .type = "ipmi", .compatible = "ipmi-kcs",
2621           .data = (void *)(unsigned long) SI_KCS },
2622         { .type = "ipmi", .compatible = "ipmi-smic",
2623           .data = (void *)(unsigned long) SI_SMIC },
2624         { .type = "ipmi", .compatible = "ipmi-bt",
2625           .data = (void *)(unsigned long) SI_BT },
2626         {},
2627 };
2628
2629 static struct of_platform_driver ipmi_of_platform_driver = {
2630         .driver = {
2631                 .name = "ipmi",
2632                 .owner = THIS_MODULE,
2633                 .of_match_table = ipmi_match,
2634         },
2635         .probe          = ipmi_of_probe,
2636         .remove         = __devexit_p(ipmi_of_remove),
2637 };
2638 #endif /* CONFIG_PPC_OF */
2639
2640 static int wait_for_msg_done(struct smi_info *smi_info)
2641 {
2642         enum si_sm_result     smi_result;
2643
2644         smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
2645         for (;;) {
2646                 if (smi_result == SI_SM_CALL_WITH_DELAY ||
2647                     smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
2648                         schedule_timeout_uninterruptible(1);
2649                         smi_result = smi_info->handlers->event(
2650                                 smi_info->si_sm, 100);
2651                 } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
2652                         smi_result = smi_info->handlers->event(
2653                                 smi_info->si_sm, 0);
2654                 } else
2655                         break;
2656         }
2657         if (smi_result == SI_SM_HOSED)
2658                 /*
2659                  * We couldn't get the state machine to run, so whatever's at
2660                  * the port is probably not an IPMI SMI interface.
2661                  */
2662                 return -ENODEV;
2663
2664         return 0;
2665 }
2666
2667 static int try_get_dev_id(struct smi_info *smi_info)
2668 {
2669         unsigned char         msg[2];
2670         unsigned char         *resp;
2671         unsigned long         resp_len;
2672         int                   rv = 0;
2673
2674         resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
2675         if (!resp)
2676                 return -ENOMEM;
2677
2678         /*
2679          * Do a Get Device ID command, since it comes back with some
2680          * useful info.
2681          */
2682         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2683         msg[1] = IPMI_GET_DEVICE_ID_CMD;
2684         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
2685
2686         rv = wait_for_msg_done(smi_info);
2687         if (rv)
2688                 goto out;
2689
2690         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2691                                                   resp, IPMI_MAX_MSG_LENGTH);
2692
2693         /* Check and record info from the get device id, in case we need it. */
2694         rv = ipmi_demangle_device_id(resp, resp_len, &smi_info->device_id);
2695
2696  out:
2697         kfree(resp);
2698         return rv;
2699 }
2700
2701 static int try_enable_event_buffer(struct smi_info *smi_info)
2702 {
2703         unsigned char         msg[3];
2704         unsigned char         *resp;
2705         unsigned long         resp_len;
2706         int                   rv = 0;
2707
2708         resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
2709         if (!resp)
2710                 return -ENOMEM;
2711
2712         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2713         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
2714         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
2715
2716         rv = wait_for_msg_done(smi_info);
2717         if (rv) {
2718                 printk(KERN_WARNING PFX "Error getting response from get"
2719                        " global enables command, the event buffer is not"
2720                        " enabled.\n");
2721                 goto out;
2722         }
2723
2724         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2725                                                   resp, IPMI_MAX_MSG_LENGTH);
2726
2727         if (resp_len < 4 ||
2728                         resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
2729                         resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD   ||
2730                         resp[2] != 0) {
2731                 printk(KERN_WARNING PFX "Invalid return from get global"
2732                        " enables command, cannot enable the event buffer.\n");
2733                 rv = -EINVAL;
2734                 goto out;
2735         }
2736
2737         if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
2738                 /* buffer is already enabled, nothing to do. */
2739                 goto out;
2740
2741         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2742         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
2743         msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
2744         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
2745
2746         rv = wait_for_msg_done(smi_info);
2747         if (rv) {
2748                 printk(KERN_WARNING PFX "Error getting response from set"
2749                        " global, enables command, the event buffer is not"
2750                        " enabled.\n");
2751                 goto out;
2752         }
2753
2754         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2755                                                   resp, IPMI_MAX_MSG_LENGTH);
2756
2757         if (resp_len < 3 ||
2758                         resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
2759                         resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
2760                 printk(KERN_WARNING PFX "Invalid return from get global,"
2761                        "enables command, not enable the event buffer.\n");
2762                 rv = -EINVAL;
2763                 goto out;
2764         }
2765
2766         if (resp[2] != 0)
2767                 /*
2768                  * An error when setting the event buffer bit means
2769                  * that the event buffer is not supported.
2770                  */
2771                 rv = -ENOENT;
2772  out:
2773         kfree(resp);
2774         return rv;
2775 }
2776
2777 static int type_file_read_proc(char *page, char **start, off_t off,
2778                                int count, int *eof, void *data)
2779 {
2780         struct smi_info *smi = data;
2781
2782         return sprintf(page, "%s\n", si_to_str[smi->si_type]);
2783 }
2784
2785 static int stat_file_read_proc(char *page, char **start, off_t off,
2786                                int count, int *eof, void *data)
2787 {
2788         char            *out = (char *) page;
2789         struct smi_info *smi = data;
2790
2791         out += sprintf(out, "interrupts_enabled:    %d\n",
2792                        smi->irq && !smi->interrupt_disabled);
2793         out += sprintf(out, "short_timeouts:        %u\n",
2794                        smi_get_stat(smi, short_timeouts));
2795         out += sprintf(out, "long_timeouts:         %u\n",
2796                        smi_get_stat(smi, long_timeouts));
2797         out += sprintf(out, "idles:                 %u\n",
2798                        smi_get_stat(smi, idles));
2799         out += sprintf(out, "interrupts:            %u\n",
2800                        smi_get_stat(smi, interrupts));
2801         out += sprintf(out, "attentions:            %u\n",
2802                        smi_get_stat(smi, attentions));
2803         out += sprintf(out, "flag_fetches:          %u\n",
2804                        smi_get_stat(smi, flag_fetches));
2805         out += sprintf(out, "hosed_count:           %u\n",
2806                        smi_get_stat(smi, hosed_count));
2807         out += sprintf(out, "complete_transactions: %u\n",
2808                        smi_get_stat(smi, complete_transactions));
2809         out += sprintf(out, "events:                %u\n",
2810                        smi_get_stat(smi, events));
2811         out += sprintf(out, "watchdog_pretimeouts:  %u\n",
2812                        smi_get_stat(smi, watchdog_pretimeouts));
2813         out += sprintf(out, "incoming_messages:     %u\n",
2814                        smi_get_stat(smi, incoming_messages));
2815
2816         return out - page;
2817 }
2818
2819 static int param_read_proc(char *page, char **start, off_t off,
2820                            int count, int *eof, void *data)
2821 {
2822         struct smi_info *smi = data;
2823
2824         return sprintf(page,
2825                        "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
2826                        si_to_str[smi->si_type],
2827                        addr_space_to_str[smi->io.addr_type],
2828                        smi->io.addr_data,
2829                        smi->io.regspacing,
2830                        smi->io.regsize,
2831                        smi->io.regshift,
2832                        smi->irq,
2833                        smi->slave_addr);
2834 }
2835
2836 /*
2837  * oem_data_avail_to_receive_msg_avail
2838  * @info - smi_info structure with msg_flags set
2839  *
2840  * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
2841  * Returns 1 indicating need to re-run handle_flags().
2842  */
2843 static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
2844 {
2845         smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
2846                                RECEIVE_MSG_AVAIL);
2847         return 1;
2848 }
2849
2850 /*
2851  * setup_dell_poweredge_oem_data_handler
2852  * @info - smi_info.device_id must be populated
2853  *
2854  * Systems that match, but have firmware version < 1.40 may assert
2855  * OEM0_DATA_AVAIL on their own, without being told via Set Flags that
2856  * it's safe to do so.  Such systems will de-assert OEM1_DATA_AVAIL
2857  * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
2858  * as RECEIVE_MSG_AVAIL instead.
2859  *
2860  * As Dell has no plans to release IPMI 1.5 firmware that *ever*
2861  * assert the OEM[012] bits, and if it did, the driver would have to
2862  * change to handle that properly, we don't actually check for the
2863  * firmware version.
2864  * Device ID = 0x20                BMC on PowerEdge 8G servers
2865  * Device Revision = 0x80
2866  * Firmware Revision1 = 0x01       BMC version 1.40
2867  * Firmware Revision2 = 0x40       BCD encoded
2868  * IPMI Version = 0x51             IPMI 1.5
2869  * Manufacturer ID = A2 02 00      Dell IANA
2870  *
2871  * Additionally, PowerEdge systems with IPMI < 1.5 may also assert
2872  * OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL.
2873  *
2874  */
2875 #define DELL_POWEREDGE_8G_BMC_DEVICE_ID  0x20
2876 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
2877 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
2878 #define DELL_IANA_MFR_ID 0x0002a2
2879 static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
2880 {
2881         struct ipmi_device_id *id = &smi_info->device_id;
2882         if (id->manufacturer_id == DELL_IANA_MFR_ID) {
2883                 if (id->device_id       == DELL_POWEREDGE_8G_BMC_DEVICE_ID  &&
2884                     id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV &&
2885                     id->ipmi_version   == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
2886                         smi_info->oem_data_avail_handler =
2887                                 oem_data_avail_to_receive_msg_avail;
2888                 } else if (ipmi_version_major(id) < 1 ||
2889                            (ipmi_version_major(id) == 1 &&
2890                             ipmi_version_minor(id) < 5)) {
2891                         smi_info->oem_data_avail_handler =
2892                                 oem_data_avail_to_receive_msg_avail;
2893                 }
2894         }
2895 }
2896
2897 #define CANNOT_RETURN_REQUESTED_LENGTH 0xCA
2898 static void return_hosed_msg_badsize(struct smi_info *smi_info)
2899 {
2900         struct ipmi_smi_msg *msg = smi_info->curr_msg;
2901
2902         /* Make it a reponse */
2903         msg->rsp[0] = msg->data[0] | 4;
2904         msg->rsp[1] = msg->data[1];
2905         msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH;
2906         msg->rsp_size = 3;
2907         smi_info->curr_msg = NULL;
2908         deliver_recv_msg(smi_info, msg);
2909 }
2910
2911 /*
2912  * dell_poweredge_bt_xaction_handler
2913  * @info - smi_info.device_id must be populated
2914  *
2915  * Dell PowerEdge servers with the BT interface (x6xx and 1750) will
2916  * not respond to a Get SDR command if the length of the data
2917  * requested is exactly 0x3A, which leads to command timeouts and no
2918  * data returned.  This intercepts such commands, and causes userspace
2919  * callers to try again with a different-sized buffer, which succeeds.
2920  */
2921
2922 #define STORAGE_NETFN 0x0A
2923 #define STORAGE_CMD_GET_SDR 0x23
2924 static int dell_poweredge_bt_xaction_handler(struct notifier_block *self,
2925                                              unsigned long unused,
2926                                              void *in)
2927 {
2928         struct smi_info *smi_info = in;
2929         unsigned char *data = smi_info->curr_msg->data;
2930         unsigned int size   = smi_info->curr_msg->data_size;
2931         if (size >= 8 &&
2932             (data[0]>>2) == STORAGE_NETFN &&
2933             data[1] == STORAGE_CMD_GET_SDR &&
2934             data[7] == 0x3A) {
2935                 return_hosed_msg_badsize(smi_info);
2936                 return NOTIFY_STOP;
2937         }
2938         return NOTIFY_DONE;
2939 }
2940
2941 static struct notifier_block dell_poweredge_bt_xaction_notifier = {
2942         .notifier_call  = dell_poweredge_bt_xaction_handler,
2943 };
2944
2945 /*
2946  * setup_dell_poweredge_bt_xaction_handler
2947  * @info - smi_info.device_id must be filled in already
2948  *
2949  * Fills in smi_info.device_id.start_transaction_pre_hook
2950  * when we know what function to use there.
2951  */
2952 static void
2953 setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info)
2954 {
2955         struct ipmi_device_id *id = &smi_info->device_id;
2956         if (id->manufacturer_id == DELL_IANA_MFR_ID &&
2957             smi_info->si_type == SI_BT)
2958                 register_xaction_notifier(&dell_poweredge_bt_xaction_notifier);
2959 }
2960
2961 /*
2962  * setup_oem_data_handler
2963  * @info - smi_info.device_id must be filled in already
2964  *
2965  * Fills in smi_info.device_id.oem_data_available_handler
2966  * when we know what function to use there.
2967  */
2968
2969 static void setup_oem_data_handler(struct smi_info *smi_info)
2970 {
2971         setup_dell_poweredge_oem_data_handler(smi_info);
2972 }
2973
2974 static void setup_xaction_handlers(struct smi_info *smi_info)
2975 {
2976         setup_dell_poweredge_bt_xaction_handler(smi_info);
2977 }
2978
2979 static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
2980 {
2981         if (smi_info->intf) {
2982                 /*
2983                  * The timer and thread are only running if the
2984                  * interface has been started up and registered.
2985                  */
2986                 if (smi_info->thread != NULL)
2987                         kthread_stop(smi_info->thread);
2988                 del_timer_sync(&smi_info->si_timer);
2989         }
2990 }
2991
2992 static __devinitdata struct ipmi_default_vals
2993 {
2994         int type;
2995         int port;
2996 } ipmi_defaults[] =
2997 {
2998         { .type = SI_KCS, .port = 0xca2 },
2999         { .type = SI_SMIC, .port = 0xca9 },
3000         { .type = SI_BT, .port = 0xe4 },
3001         { .port = 0 }
3002 };
3003
3004 static __devinit void default_find_bmc(void)
3005 {
3006         struct smi_info *info;
3007         int             i;
3008
3009         for (i = 0; ; i++) {
3010                 if (!ipmi_defaults[i].port)
3011                         break;
3012 #ifdef CONFIG_PPC
3013                 if (check_legacy_ioport(ipmi_defaults[i].port))
3014                         continue;
3015 #endif
3016                 info = kzalloc(sizeof(*info), GFP_KERNEL);
3017                 if (!info)
3018                         return;
3019
3020                 info->addr_source = SI_DEFAULT;
3021
3022                 info->si_type = ipmi_defaults[i].type;
3023                 info->io_setup = port_setup;
3024                 info->io.addr_data = ipmi_defaults[i].port;
3025                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
3026
3027                 info->io.addr = NULL;
3028                 info->io.regspacing = DEFAULT_REGSPACING;
3029                 info->io.regsize = DEFAULT_REGSPACING;
3030                 info->io.regshift = 0;
3031
3032                 if (add_smi(info) == 0) {
3033                         if ((try_smi_init(info)) == 0) {
3034                                 /* Found one... */
3035                                 printk(KERN_INFO PFX "Found default %s"
3036                                 " state machine at %s address 0x%lx\n",
3037                                 si_to_str[info->si_type],
3038                                 addr_space_to_str[info->io.addr_type],
3039                                 info->io.addr_data);
3040                         } else
3041                                 cleanup_one_si(info);
3042                 } else {
3043                         kfree(info);
3044                 }
3045         }
3046 }
3047
3048 static int is_new_interface(struct smi_info *info)
3049 {
3050         struct smi_info *e;
3051
3052         list_for_each_entry(e, &smi_infos, link) {
3053                 if (e->io.addr_type != info->io.addr_type)
3054                         continue;
3055                 if (e->io.addr_data == info->io.addr_data)
3056                         return 0;
3057         }
3058
3059         return 1;
3060 }
3061
3062 static int add_smi(struct smi_info *new_smi)
3063 {
3064         int rv = 0;
3065
3066         printk(KERN_INFO PFX "Adding %s-specified %s state machine",
3067                         ipmi_addr_src_to_str[new_smi->addr_source],
3068                         si_to_str[new_smi->si_type]);
3069         mutex_lock(&smi_infos_lock);
3070         if (!is_new_interface(new_smi)) {
3071                 printk(KERN_CONT " duplicate interface\n");
3072                 rv = -EBUSY;
3073                 goto out_err;
3074         }
3075
3076         printk(KERN_CONT "\n");
3077
3078         /* So we know not to free it unless we have allocated one. */
3079         new_smi->intf = NULL;
3080         new_smi->si_sm = NULL;
3081         new_smi->handlers = NULL;
3082
3083         list_add_tail(&new_smi->link, &smi_infos);
3084
3085 out_err:
3086         mutex_unlock(&smi_infos_lock);
3087         return rv;
3088 }
3089
3090 static int try_smi_init(struct smi_info *new_smi)
3091 {
3092         int rv = 0;
3093         int i;
3094
3095         printk(KERN_INFO PFX "Trying %s-specified %s state"
3096                " machine at %s address 0x%lx, slave address 0x%x,"
3097                " irq %d\n",
3098                ipmi_addr_src_to_str[new_smi->addr_source],
3099                si_to_str[new_smi->si_type],
3100                addr_space_to_str[new_smi->io.addr_type],
3101                new_smi->io.addr_data,
3102                new_smi->slave_addr, new_smi->irq);
3103
3104         switch (new_smi->si_type) {
3105         case SI_KCS:
3106                 new_smi->handlers = &kcs_smi_handlers;
3107                 break;
3108
3109         case SI_SMIC:
3110                 new_smi->handlers = &smic_smi_handlers;
3111                 break;
3112
3113         case SI_BT:
3114                 new_smi->handlers = &bt_smi_handlers;
3115                 break;
3116
3117         default:
3118                 /* No support for anything else yet. */
3119                 rv = -EIO;
3120                 goto out_err;
3121         }
3122
3123         /* Allocate the state machine's data and initialize it. */
3124         new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
3125         if (!new_smi->si_sm) {
3126                 printk(KERN_ERR PFX
3127                        "Could not allocate state machine memory\n");
3128                 rv = -ENOMEM;
3129                 goto out_err;
3130         }
3131         new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm,
3132                                                         &new_smi->io);
3133
3134         /* Now that we know the I/O size, we can set up the I/O. */
3135         rv = new_smi->io_setup(new_smi);
3136         if (rv) {
3137                 printk(KERN_ERR PFX "Could not set up I/O space\n");
3138                 goto out_err;
3139         }
3140
3141         spin_lock_init(&(new_smi->si_lock));
3142         spin_lock_init(&(new_smi->msg_lock));
3143
3144         /* Do low-level detection first. */
3145         if (new_smi->handlers->detect(new_smi->si_sm)) {
3146                 if (new_smi->addr_source)
3147                         printk(KERN_INFO PFX "Interface detection failed\n");
3148                 rv = -ENODEV;
3149                 goto out_err;
3150         }
3151
3152         /*
3153          * Attempt a get device id command.  If it fails, we probably
3154          * don't have a BMC here.
3155          */
3156         rv = try_get_dev_id(new_smi);
3157         if (rv) {
3158                 if (new_smi->addr_source)
3159                         printk(KERN_INFO PFX "There appears to be no BMC"
3160                                " at this location\n");
3161                 goto out_err;
3162         }
3163
3164         setup_oem_data_handler(new_smi);
3165         setup_xaction_handlers(new_smi);
3166
3167         INIT_LIST_HEAD(&(new_smi->xmit_msgs));
3168         INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
3169         new_smi->curr_msg = NULL;
3170         atomic_set(&new_smi->req_events, 0);
3171         new_smi->run_to_completion = 0;
3172         for (i = 0; i < SI_NUM_STATS; i++)
3173                 atomic_set(&new_smi->stats[i], 0);
3174
3175         new_smi->interrupt_disabled = 1;
3176         atomic_set(&new_smi->stop_operation, 0);
3177         new_smi->intf_num = smi_num;
3178         smi_num++;
3179
3180         rv = try_enable_event_buffer(new_smi);
3181         if (rv == 0)
3182                 new_smi->has_event_buffer = 1;
3183
3184         /*
3185          * Start clearing the flags before we enable interrupts or the
3186          * timer to avoid racing with the timer.
3187          */
3188         start_clear_flags(new_smi);
3189         /* IRQ is defined to be set when non-zero. */
3190         if (new_smi->irq)
3191                 new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
3192
3193         if (!new_smi->dev) {
3194                 /*
3195                  * If we don't already have a device from something
3196                  * else (like PCI), then register a new one.
3197                  */
3198                 new_smi->pdev = platform_device_alloc("ipmi_si",
3199                                                       new_smi->intf_num);
3200                 if (!new_smi->pdev) {
3201                         printk(KERN_ERR PFX
3202                                "Unable to allocate platform device\n");
3203                         goto out_err;
3204                 }
3205                 new_smi->dev = &new_smi->pdev->dev;
3206                 new_smi->dev->driver = &ipmi_driver.driver;
3207
3208                 rv = platform_device_add(new_smi->pdev);
3209                 if (rv) {
3210                         printk(KERN_ERR PFX
3211                                "Unable to register system interface device:"
3212                                " %d\n",
3213                                rv);
3214                         goto out_err;
3215                 }
3216                 new_smi->dev_registered = 1;
3217         }
3218
3219         rv = ipmi_register_smi(&handlers,
3220                                new_smi,
3221                                &new_smi->device_id,
3222                                new_smi->dev,
3223                                "bmc",
3224                                new_smi->slave_addr);
3225         if (rv) {
3226                 dev_err(new_smi->dev, "Unable to register device: error %d\n",
3227                         rv);
3228                 goto out_err_stop_timer;
3229         }
3230
3231         rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
3232                                      type_file_read_proc,
3233                                      new_smi);
3234         if (rv) {
3235                 dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
3236                 goto out_err_stop_timer;
3237         }
3238
3239         rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
3240                                      stat_file_read_proc,
3241                                      new_smi);
3242         if (rv) {
3243                 dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
3244                 goto out_err_stop_timer;
3245         }
3246
3247         rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
3248                                      param_read_proc,
3249                                      new_smi);
3250         if (rv) {
3251                 dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
3252                 goto out_err_stop_timer;
3253         }
3254
3255         dev_info(new_smi->dev, "IPMI %s interface initialized\n",
3256                  si_to_str[new_smi->si_type]);
3257
3258         return 0;
3259
3260  out_err_stop_timer:
3261         atomic_inc(&new_smi->stop_operation);
3262         wait_for_timer_and_thread(new_smi);
3263
3264  out_err:
3265         new_smi->interrupt_disabled = 1;
3266
3267         if (new_smi->intf) {
3268                 ipmi_unregister_smi(new_smi->intf);
3269                 new_smi->intf = NULL;
3270         }
3271
3272         if (new_smi->irq_cleanup) {
3273                 new_smi->irq_cleanup(new_smi);
3274                 new_smi->irq_cleanup = NULL;
3275         }
3276
3277         /*
3278          * Wait until we know that we are out of any interrupt
3279          * handlers might have been running before we freed the
3280          * interrupt.
3281          */
3282         synchronize_sched();
3283
3284         if (new_smi->si_sm) {
3285                 if (new_smi->handlers)
3286                         new_smi->handlers->cleanup(new_smi->si_sm);
3287                 kfree(new_smi->si_sm);
3288                 new_smi->si_sm = NULL;
3289         }
3290         if (new_smi->addr_source_cleanup) {
3291                 new_smi->addr_source_cleanup(new_smi);
3292                 new_smi->addr_source_cleanup = NULL;
3293         }
3294         if (new_smi->io_cleanup) {
3295                 new_smi->io_cleanup(new_smi);
3296                 new_smi->io_cleanup = NULL;
3297         }
3298
3299         if (new_smi->dev_registered) {
3300                 platform_device_unregister(new_smi->pdev);
3301                 new_smi->dev_registered = 0;
3302         }
3303
3304         return rv;
3305 }
3306
3307 static __devinit int init_ipmi_si(void)
3308 {
3309         int  i;
3310         char *str;
3311         int  rv;
3312         struct smi_info *e;
3313         enum ipmi_addr_src type = SI_INVALID;
3314
3315         if (initialized)
3316                 return 0;
3317         initialized = 1;
3318
3319         /* Register the device drivers. */
3320         rv = driver_register(&ipmi_driver.driver);
3321         if (rv) {
3322                 printk(KERN_ERR PFX "Unable to register driver: %d\n", rv);
3323                 return rv;
3324         }
3325
3326
3327         /* Parse out the si_type string into its components. */
3328         str = si_type_str;
3329         if (*str != '\0') {
3330                 for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
3331                         si_type[i] = str;
3332                         str = strchr(str, ',');
3333                         if (str) {
3334                                 *str = '\0';
3335                                 str++;
3336                         } else {
3337                                 break;
3338                         }
3339                 }
3340         }
3341
3342         printk(KERN_INFO "IPMI System Interface driver.\n");
3343
3344         hardcode_find_bmc();
3345
3346         /* If the user gave us a device, they presumably want us to use it */
3347         mutex_lock(&smi_infos_lock);
3348         if (!list_empty(&smi_infos)) {
3349                 mutex_unlock(&smi_infos_lock);
3350                 return 0;
3351         }
3352         mutex_unlock(&smi_infos_lock);
3353
3354 #ifdef CONFIG_PCI
3355         rv = pci_register_driver(&ipmi_pci_driver);
3356         if (rv)
3357                 printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
3358         else
3359                 pci_registered = 1;
3360 #endif
3361
3362 #ifdef CONFIG_ACPI
3363         pnp_register_driver(&ipmi_pnp_driver);
3364         pnp_registered = 1;
3365 #endif
3366
3367 #ifdef CONFIG_DMI
3368         dmi_find_bmc();
3369 #endif
3370
3371 #ifdef CONFIG_ACPI
3372         spmi_find_bmc();
3373 #endif
3374
3375 #ifdef CONFIG_PPC_OF
3376         of_register_platform_driver(&ipmi_of_platform_driver);
3377         of_registered = 1;
3378 #endif
3379
3380         /* We prefer devices with interrupts, but in the case of a machine
3381            with multiple BMCs we assume that there will be several instances
3382            of a given type so if we succeed in registering a type then also
3383            try to register everything else of the same type */
3384
3385         mutex_lock(&smi_infos_lock);
3386         list_for_each_entry(e, &smi_infos, link) {
3387                 /* Try to register a device if it has an IRQ and we either
3388                    haven't successfully registered a device yet or this
3389                    device has the same type as one we successfully registered */
3390                 if (e->irq && (!type || e->addr_source == type)) {
3391                         if (!try_smi_init(e)) {
3392                                 type = e->addr_source;
3393                         }
3394                 }
3395         }
3396
3397         /* type will only have been set if we successfully registered an si */
3398         if (type) {
3399                 mutex_unlock(&smi_infos_lock);
3400                 return 0;
3401         }
3402
3403         /* Fall back to the preferred device */
3404
3405         list_for_each_entry(e, &smi_infos, link) {
3406                 if (!e->irq && (!type || e->addr_source == type)) {
3407                         if (!try_smi_init(e)) {
3408                                 type = e->addr_source;
3409                         }
3410                 }
3411         }
3412         mutex_unlock(&smi_infos_lock);
3413
3414         if (type)
3415                 return 0;
3416
3417         if (si_trydefaults) {
3418                 mutex_lock(&smi_infos_lock);
3419                 if (list_empty(&smi_infos)) {
3420                         /* No BMC was found, try defaults. */
3421                         mutex_unlock(&smi_infos_lock);
3422                         default_find_bmc();
3423                 } else
3424                         mutex_unlock(&smi_infos_lock);
3425         }
3426
3427         mutex_lock(&smi_infos_lock);
3428         if (unload_when_empty && list_empty(&smi_infos)) {
3429                 mutex_unlock(&smi_infos_lock);
3430 #ifdef CONFIG_PCI
3431                 if (pci_registered)
3432                         pci_unregister_driver(&ipmi_pci_driver);
3433 #endif
3434
3435 #ifdef CONFIG_PPC_OF
3436                 if (of_registered)
3437                         of_unregister_platform_driver(&ipmi_of_platform_driver);
3438 #endif
3439                 driver_unregister(&ipmi_driver.driver);
3440                 printk(KERN_WARNING PFX
3441                        "Unable to find any System Interface(s)\n");
3442                 return -ENODEV;
3443         } else {
3444                 mutex_unlock(&smi_infos_lock);
3445                 return 0;
3446         }
3447 }
3448 module_init(init_ipmi_si);
3449
3450 static void cleanup_one_si(struct smi_info *to_clean)
3451 {
3452         int           rv = 0;
3453         unsigned long flags;
3454
3455         if (!to_clean)
3456                 return;
3457
3458         list_del(&to_clean->link);
3459
3460         /* Tell the driver that we are shutting down. */
3461         atomic_inc(&to_clean->stop_operation);
3462
3463         /*
3464          * Make sure the timer and thread are stopped and will not run
3465          * again.
3466          */
3467         wait_for_timer_and_thread(to_clean);
3468
3469         /*
3470          * Timeouts are stopped, now make sure the interrupts are off
3471          * for the device.  A little tricky with locks to make sure
3472          * there are no races.
3473          */
3474         spin_lock_irqsave(&to_clean->si_lock, flags);
3475         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3476                 spin_unlock_irqrestore(&to_clean->si_lock, flags);
3477                 poll(to_clean);
3478                 schedule_timeout_uninterruptible(1);
3479                 spin_lock_irqsave(&to_clean->si_lock, flags);
3480         }
3481         disable_si_irq(to_clean);
3482         spin_unlock_irqrestore(&to_clean->si_lock, flags);
3483         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3484                 poll(to_clean);
3485                 schedule_timeout_uninterruptible(1);
3486         }
3487
3488         /* Clean up interrupts and make sure that everything is done. */
3489         if (to_clean->irq_cleanup)
3490                 to_clean->irq_cleanup(to_clean);
3491         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3492                 poll(to_clean);
3493                 schedule_timeout_uninterruptible(1);
3494         }
3495
3496         if (to_clean->intf)
3497                 rv = ipmi_unregister_smi(to_clean->intf);
3498
3499         if (rv) {
3500                 printk(KERN_ERR PFX "Unable to unregister device: errno=%d\n",
3501                        rv);
3502         }
3503
3504         if (to_clean->handlers)
3505                 to_clean->handlers->cleanup(to_clean->si_sm);
3506
3507         kfree(to_clean->si_sm);
3508
3509         if (to_clean->addr_source_cleanup)
3510                 to_clean->addr_source_cleanup(to_clean);
3511         if (to_clean->io_cleanup)
3512                 to_clean->io_cleanup(to_clean);
3513
3514         if (to_clean->dev_registered)
3515                 platform_device_unregister(to_clean->pdev);
3516
3517         kfree(to_clean);
3518 }
3519
3520 static __exit void cleanup_ipmi_si(void)
3521 {
3522         struct smi_info *e, *tmp_e;
3523
3524         if (!initialized)
3525                 return;
3526
3527 #ifdef CONFIG_PCI
3528         if (pci_registered)
3529                 pci_unregister_driver(&ipmi_pci_driver);
3530 #endif
3531 #ifdef CONFIG_ACPI
3532         if (pnp_registered)
3533                 pnp_unregister_driver(&ipmi_pnp_driver);
3534 #endif
3535
3536 #ifdef CONFIG_PPC_OF
3537         if (of_registered)
3538                 of_unregister_platform_driver(&ipmi_of_platform_driver);
3539 #endif
3540
3541         mutex_lock(&smi_infos_lock);
3542         list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
3543                 cleanup_one_si(e);
3544         mutex_unlock(&smi_infos_lock);
3545
3546         driver_unregister(&ipmi_driver.driver);
3547 }
3548 module_exit(cleanup_ipmi_si);
3549
3550 MODULE_LICENSE("GPL");
3551 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
3552 MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
3553                    " system interfaces.");