[net-next-2.6.git] / sound / drivers / Kconfig

# ALSA generic drivers

menu "Generic devices"
	depends on SND!=n


config SND_PCSP
	tristate "PC-Speaker support"
	depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
	depends on INPUT
	depends on SND
	select SND_PCM
	help
	  If you don't have a sound card in your computer, you can include a
	  driver for the PC speaker which allows it to act like a primitive
	  sound card.
	  This driver also replaces the pcspkr driver for beeps.

	  You can compile this as a module which will be called snd-pcsp.

	  You don't need this driver if you only want your pc-speaker to beep.
	  You don't need this driver if you have a tablet piezo beeper
	  in your PC instead of the real speaker.

	  It should not hurt to say Y or M here in all other cases.

config SND_MPU401_UART
        tristate
        select SND_RAWMIDI

config SND_OPL3_LIB
	tristate
	select SND_TIMER
	select SND_HWDEP

config SND_OPL4_LIB
	tristate
	select SND_TIMER
	select SND_HWDEP

config SND_VX_LIB
	tristate
	select SND_HWDEP
	select SND_PCM

config SND_AC97_CODEC
	tristate
	select SND_PCM
	select AC97_BUS

config SND_DUMMY
	tristate "Dummy (/dev/null) soundcard"
	depends on SND
	select SND_PCM
	help
	  Say Y here to include the dummy driver.  This driver does
	  nothing, but emulates various mixer controls and PCM devices.

	  You don't need this unless you're testing the hardware support
	  of programs using the ALSA API.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-dummy.

config SND_VIRMIDI
	tristate "Virtual MIDI soundcard"
	depends on SND_SEQUENCER
	select SND_TIMER
	select SND_RAWMIDI
	help
	  Say Y here to include the virtual MIDI driver.  This driver
	  allows to connect applications using raw MIDI devices to
	  sequencer clients.

	  If you don't know what MIDI is, say N here.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-virmidi.

config SND_MTPAV
	tristate "MOTU MidiTimePiece AV multiport MIDI"
	depends on SND
	select SND_RAWMIDI
	help
	  To use a MOTU MidiTimePiece AV multiport MIDI adapter
	  connected to the parallel port, say Y here and make sure that
	  the standard parallel port driver isn't used for the port.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-mtpav.

config SND_MTS64
	tristate "ESI Miditerminal 4140 driver"
	depends on SND && PARPORT
	select SND_RAWMIDI
	help
	  The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with 
          additional SMPTE Timecode capabilities for the parallel port.

	  Say 'Y' to include support for this device.

	  To compile this driver as a module, chose 'M' here: the module 
          will be called snd-mts64.

config SND_SERIAL_U16550
	tristate "UART16550 serial MIDI driver"
	depends on SND
	select SND_RAWMIDI
	help
	  To include support for MIDI serial port interfaces, say Y here
	  and read <file:Documentation/sound/alsa/serial-u16550.txt>.
	  This driver works with serial UARTs 16550 and better.

	  This driver accesses the serial port hardware directly, so
	  make sure that the standard serial driver isn't used or
	  deactivated with setserial before loading this driver.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-serial-u16550.

config SND_MPU401
	tristate "Generic MPU-401 UART driver"
	depends on SND
	select SND_MPU401_UART
	help
	  Say Y here to include support for MIDI ports compatible with
	  the Roland MPU-401 interface in UART mode.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-mpu401.

config SND_PORTMAN2X4
	tristate "Portman 2x4 driver"
	depends on SND && PARPORT
	select SND_RAWMIDI
	help
	  Say Y here to include support for Midiman Portman 2x4 parallel
	  port MIDI device.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-portman2x4.

config SND_ML403_AC97CR
	tristate "Xilinx ML403 AC97 Controller Reference"
	depends on SND && XILINX_VIRTEX
	select SND_AC97_CODEC
	help
	  Say Y here to include support for the
	  opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403
	  reference design.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-ml403_ac97cr.

endmenu
Commit	Line	Data
1da177e4 LT	1	# ALSA generic drivers
	2
	3	menu "Generic devices"
	4	depends on SND!=n
	5
	6
9ab4d072	7	config SND_PCSP
e5e1d3cb SS	8	tristate "PC-Speaker support"
e5e1d3cb SS	9	depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
73bdd2ad	10	depends on INPUT
bad7785d TI	11	depends on SND
bad7785d TI	12	select SND_PCM
9ab4d072 SS	13	help
	14	If you don't have a sound card in your computer, you can include a
	15	driver for the PC speaker which allows it to act like a primitive
	16	sound card.
	17	This driver also replaces the pcspkr driver for beeps.
	18
	19	You can compile this as a module which will be called snd-pcsp.
	20
	21	You don't need this driver if you only want your pc-speaker to beep.
	22	You don't need this driver if you have a tablet piezo beeper
	23	in your PC instead of the real speaker.
	24
	25	It should not hurt to say Y or M here in all other cases.
	26
1da177e4 LT	27	config SND_MPU401_UART
1da177e4 LT	28	tristate
1da177e4 LT	29	select SND_RAWMIDI
	30
	31	config SND_OPL3_LIB
	32	tristate
	33	select SND_TIMER
	34	select SND_HWDEP
	35
	36	config SND_OPL4_LIB
	37	tristate
	38	select SND_TIMER
	39	select SND_HWDEP
	40
	41	config SND_VX_LIB
	42	tristate
	43	select SND_HWDEP
	44	select SND_PCM
	45
9056412f RD	46	config SND_AC97_CODEC
	47	tristate
	48	select SND_PCM
e1036502	49	select AC97_BUS
1da177e4 LT	50
	51	config SND_DUMMY
	52	tristate "Dummy (/dev/null) soundcard"
	53	depends on SND
	54	select SND_PCM
	55	help
	56	Say Y here to include the dummy driver. This driver does
	57	nothing, but emulates various mixer controls and PCM devices.
	58
	59	You don't need this unless you're testing the hardware support
	60	of programs using the ALSA API.
	61
	62	To compile this driver as a module, choose M here: the module
	63	will be called snd-dummy.
	64
	65	config SND_VIRMIDI
	66	tristate "Virtual MIDI soundcard"
	67	depends on SND_SEQUENCER
	68	select SND_TIMER
	69	select SND_RAWMIDI
	70	help
	71	Say Y here to include the virtual MIDI driver. This driver
	72	allows to connect applications using raw MIDI devices to
	73	sequencer clients.
	74
	75	If you don't know what MIDI is, say N here.
	76
	77	To compile this driver as a module, choose M here: the module
	78	will be called snd-virmidi.
	79
	80	config SND_MTPAV
	81	tristate "MOTU MidiTimePiece AV multiport MIDI"
	82	depends on SND
1da177e4 LT	83	select SND_RAWMIDI
	84	help
	85	To use a MOTU MidiTimePiece AV multiport MIDI adapter
	86	connected to the parallel port, say Y here and make sure that
	87	the standard parallel port driver isn't used for the port.
	88
	89	To compile this driver as a module, choose M here: the module
	90	will be called snd-mtpav.
	91
68ab801e MK	92	config SND_MTS64
	93	tristate "ESI Miditerminal 4140 driver"
	94	depends on SND && PARPORT
	95	select SND_RAWMIDI
	96	help
	97	The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with
	98	additional SMPTE Timecode capabilities for the parallel port.
	99
	100	Say 'Y' to include support for this device.
	101
	102	To compile this driver as a module, chose 'M' here: the module
	103	will be called snd-mts64.
	104
1da177e4 LT	105	config SND_SERIAL_U16550
	106	tristate "UART16550 serial MIDI driver"
	107	depends on SND
1da177e4 LT	108	select SND_RAWMIDI
	109	help
	110	To include support for MIDI serial port interfaces, say Y here
	111	and read <file:Documentation/sound/alsa/serial-u16550.txt>.
	112	This driver works with serial UARTs 16550 and better.
	113
	114	This driver accesses the serial port hardware directly, so
	115	make sure that the standard serial driver isn't used or
	116	deactivated with setserial before loading this driver.
	117
	118	To compile this driver as a module, choose M here: the module
	119	will be called snd-serial-u16550.
	120
	121	config SND_MPU401
	122	tristate "Generic MPU-401 UART driver"
	123	depends on SND
	124	select SND_MPU401_UART
	125	help
	126	Say Y here to include support for MIDI ports compatible with
	127	the Roland MPU-401 interface in UART mode.
	128
	129	To compile this driver as a module, choose M here: the module
	130	will be called snd-mpu401.
	131
757e119b MK	132	config SND_PORTMAN2X4
	133	tristate "Portman 2x4 driver"
	134	depends on SND && PARPORT
	135	select SND_RAWMIDI
	136	help
	137	Say Y here to include support for Midiman Portman 2x4 parallel
	138	port MIDI device.
	139
	140	To compile this driver as a module, choose M here: the module
	141	will be called snd-portman2x4.
	142
a9f00d8d JF	143	config SND_ML403_AC97CR
	144	tristate "Xilinx ML403 AC97 Controller Reference"
	145	depends on SND && XILINX_VIRTEX
	146	select SND_AC97_CODEC
	147	help
	148	Say Y here to include support for the
	149	opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403
	150	reference design.
	151
	152	To compile this driver as a module, choose M here: the module
	153	will be called snd-ml403_ac97cr.
	154
1da177e4	155	endmenu