[net-next-2.6.git] / net / wireless / Kconfig

config WIRELESS_EXT
	bool

config WEXT_CORE
	def_bool y
	depends on CFG80211_WEXT || WIRELESS_EXT

config WEXT_PROC
	def_bool y
	depends on PROC_FS
	depends on WEXT_CORE

config WEXT_SPY
	bool

config WEXT_PRIV
	bool

config CFG80211
	tristate "cfg80211 - wireless configuration API"
	depends on RFKILL || !RFKILL
	---help---
	  cfg80211 is the Linux wireless LAN (802.11) configuration API.
	  Enable this if you have a wireless device.

	  For more information refer to documentation on the wireless wiki:

	  http://wireless.kernel.org/en/developers/Documentation/cfg80211

	  When built as a module it will be called cfg80211.

config NL80211_TESTMODE
	bool "nl80211 testmode command"
	depends on CFG80211
	help
	  The nl80211 testmode command helps implementing things like
	  factory calibration or validation tools for wireless chips.

	  Select this option ONLY for kernels that are specifically
	  built for such purposes.

	  Debugging tools that are supposed to end up in the hands of
	  users should better be implemented with debugfs.

	  Say N.

config CFG80211_DEVELOPER_WARNINGS
	bool "enable developer warnings"
	depends on CFG80211
	default n
	help
	  This option enables some additional warnings that help
	  cfg80211 developers and driver developers, but that can
	  trigger due to races with userspace.

	  For example, when a driver reports that it was disconnected
	  from the AP, but the user disconnects manually at the same
	  time, the warning might trigger spuriously due to races.

	  Say Y only if you are developing cfg80211 or a driver based
	  on it (or mac80211).


config CFG80211_REG_DEBUG
	bool "cfg80211 regulatory debugging"
	depends on CFG80211
	default n
	---help---
	  You can enable this if you want to debug regulatory changes.
	  For more information on cfg80211 regulatory refer to the wireless
	  wiki:

	  http://wireless.kernel.org/en/developers/Regulatory

	  If unsure, say N.

config CFG80211_DEFAULT_PS
	bool "enable powersave by default"
	depends on CFG80211
	default y
	help
	  This option enables powersave mode by default.

	  If this causes your applications to misbehave you should fix your
	  applications instead -- they need to register their network
	  latency requirement, see Documentation/power/pm_qos_interface.txt.

config CFG80211_DEBUGFS
	bool "cfg80211 DebugFS entries"
	depends on CFG80211
	depends on DEBUG_FS
	---help---
	  You can enable this if you want to debugfs entries for cfg80211.

	  If unsure, say N.

config CFG80211_INTERNAL_REGDB
	bool "use statically compiled regulatory rules database" if EMBEDDED
	default n
	depends on CFG80211
	---help---
	  This option generates an internal data structure representing
	  the wireless regulatory rules described in net/wireless/db.txt
	  and includes code to query that database.  This is an alternative
	  to using CRDA for defining regulatory rules for the kernel.

	  For details see:

	  http://wireless.kernel.org/en/developers/Regulatory

	  Most distributions have a CRDA package.  So if unsure, say N.

config CFG80211_WEXT
	bool "cfg80211 wireless extensions compatibility"
	depends on CFG80211
	select WEXT_CORE
	default y
	help
	  Enable this option if you need old userspace for wireless
	  extensions with cfg80211-based drivers.

config WIRELESS_EXT_SYSFS
	bool "Wireless extensions sysfs files"
	default y
	depends on WEXT_CORE && SYSFS
	help
	  This option enables the deprecated wireless statistics
	  files in /sys/class/net/*/wireless/. The same information
	  is available via the ioctls as well.

	  Say Y if you have programs using it, like old versions of
	  hal.

config LIB80211
	tristate "Common routines for IEEE802.11 drivers"
	default n
	help
	  This options enables a library of common routines used
	  by IEEE802.11 wireless LAN drivers.

	  Drivers should select this themselves if needed.  Say Y if
	  you want this built into your kernel.

config LIB80211_CRYPT_WEP
	tristate

config LIB80211_CRYPT_CCMP
	tristate

config LIB80211_CRYPT_TKIP
	tristate

config LIB80211_DEBUG
	bool "lib80211 debugging messages"
	depends on LIB80211
	default n
	---help---
	  You can enable this if you want verbose debugging messages
	  from lib80211.

	  If unsure, say N.
Commit	Line	Data
3d23e349 JB	1	config WIRELESS_EXT
	2	bool
	3
	4	config WEXT_CORE
	5	def_bool y
	6	depends on CFG80211_WEXT \|\| WIRELESS_EXT
	7
	8	config WEXT_PROC
	9	def_bool y
	10	depends on PROC_FS
	11	depends on WEXT_CORE
	12
	13	config WEXT_SPY
	14	bool
	15
	16	config WEXT_PRIV
	17	bool
	18
704232c2	19	config CFG80211
b275f285	20	tristate "cfg80211 - wireless configuration API"
1f87f7d3	21	depends on RFKILL \|\| !RFKILL
b275f285 LR	22	---help---
	23	cfg80211 is the Linux wireless LAN (802.11) configuration API.
	24	Enable this if you have a wireless device.
	25
	26	For more information refer to documentation on the wireless wiki:
	27
	28	http://wireless.kernel.org/en/developers/Documentation/cfg80211
	29
	30	When built as a module it will be called cfg80211.
704232c2	31
aff89a9b JB	32	config NL80211_TESTMODE
	33	bool "nl80211 testmode command"
	34	depends on CFG80211
	35	help
	36	The nl80211 testmode command helps implementing things like
	37	factory calibration or validation tools for wireless chips.
	38
	39	Select this option ONLY for kernels that are specifically
	40	built for such purposes.
	41
	42	Debugging tools that are supposed to end up in the hands of
	43	users should better be implemented with debugfs.
	44
	45	Say N.
	46
f7969969 JB	47	config CFG80211_DEVELOPER_WARNINGS
	48	bool "enable developer warnings"
	49	depends on CFG80211
	50	default n
	51	help
	52	This option enables some additional warnings that help
	53	cfg80211 developers and driver developers, but that can
	54	trigger due to races with userspace.
	55
	56	For example, when a driver reports that it was disconnected
	57	from the AP, but the user disconnects manually at the same
	58	time, the warning might trigger spuriously due to races.
	59
	60	Say Y only if you are developing cfg80211 or a driver based
	61	on it (or mac80211).
	62
	63
3f2355cb LR	64	config CFG80211_REG_DEBUG
	65	bool "cfg80211 regulatory debugging"
	66	depends on CFG80211
	67	default n
	68	---help---
	69	You can enable this if you want to debug regulatory changes.
253850c1 LR	70	For more information on cfg80211 regulatory refer to the wireless
	71	wiki:
	72
	73	http://wireless.kernel.org/en/developers/Regulatory
3f2355cb LR	74
	75	If unsure, say N.
	76
bc92afd9 JB	77	config CFG80211_DEFAULT_PS
	78	bool "enable powersave by default"
	79	depends on CFG80211
	80	default y
	81	help
	82	This option enables powersave mode by default.
	83
	84	If this causes your applications to misbehave you should fix your
	85	applications instead -- they need to register their network
	86	latency requirement, see Documentation/power/pm_qos_interface.txt.
	87
1ac61302 LR	88	config CFG80211_DEBUGFS
1ac61302 LR	89	bool "cfg80211 DebugFS entries"
3d23e349 JB	90	depends on CFG80211
3d23e349 JB	91	depends on DEBUG_FS
1ac61302 LR	92	---help---
	93	You can enable this if you want to debugfs entries for cfg80211.
	94
	95	If unsure, say N.
	96
3b377ea9 JL	97	config CFG80211_INTERNAL_REGDB
	98	bool "use statically compiled regulatory rules database" if EMBEDDED
	99	default n
	100	depends on CFG80211
	101	---help---
	102	This option generates an internal data structure representing
	103	the wireless regulatory rules described in net/wireless/db.txt
	104	and includes code to query that database. This is an alternative
	105	to using CRDA for defining regulatory rules for the kernel.
	106
	107	For details see:
	108
	109	http://wireless.kernel.org/en/developers/Regulatory
	110
	111	Most distributions have a CRDA package. So if unsure, say N.
	112
3d23e349 JB	113	config CFG80211_WEXT
	114	bool "cfg80211 wireless extensions compatibility"
	115	depends on CFG80211
	116	select WEXT_CORE
89832402	117	default y
3d23e349 JB	118	help
	119	Enable this option if you need old userspace for wireless
	120	extensions with cfg80211-based drivers.
22bb1be4 JB	121
	122	config WIRELESS_EXT_SYSFS
	123	bool "Wireless extensions sysfs files"
	124	default y
3d23e349	125	depends on WEXT_CORE && SYSFS
22bb1be4 JB	126	help
	127	This option enables the deprecated wireless statistics
	128	files in /sys/class/net/*/wireless/. The same information
	129	is available via the ioctls as well.
	130
d9664741 FM	131	Say Y if you have programs using it, like old versions of
d9664741 FM	132	hal.
7e272fcf JL	133
	134	config LIB80211
	135	tristate "Common routines for IEEE802.11 drivers"
	136	default n
	137	help
	138	This options enables a library of common routines used
	139	by IEEE802.11 wireless LAN drivers.
	140
	141	Drivers should select this themselves if needed. Say Y if
	142	you want this built into your kernel.
274bfb8d JL	143
	144	config LIB80211_CRYPT_WEP
	145	tristate
	146
	147	config LIB80211_CRYPT_CCMP
	148	tristate
	149
	150	config LIB80211_CRYPT_TKIP
	151	tristate
6f16bf3b JL	152
	153	config LIB80211_DEBUG
	154	bool "lib80211 debugging messages"
	155	depends on LIB80211
	156	default n
	157	---help---
	158	You can enable this if you want verbose debugging messages
	159	from lib80211.
	160
	161	If unsure, say N.