git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| 1da177e4 LT |
1 | /* |
| 2 | * Definitions for Intel 82593 CSMA/CD Core LAN Controller | |
| 3 | * The definitions are taken from the 1992 users manual with Intel | |
| 4 | * order number 297125-001. | |
| 5 | * | |
| 6 | * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp | |
| 7 | * | |
| 8 | * Copyright 1994, Anders Klemets <klemets@it.kth.se> | |
| 9 | * | |
| 1da177e4 LT |
10 | * HISTORY |
| 11 | * i82593.h,v | |
| 620d9aa9 JL |
12 | * Revision 1.4 2005/11/4 09:15:00 baroniunas |
| 13 | * Modified copyright with permission of author as follows: | |
| 14 | * | |
| 15 | * "If I82539.H is the only file with my copyright statement | |
| 16 | * that is included in the Source Forge project, then you have | |
| 17 | * my approval to change the copyright statement to be a GPL | |
| 18 | * license, in the way you proposed on October 10." | |
| 19 | * | |
| 1da177e4 LT |
20 | * Revision 1.1 1996/07/17 15:23:12 root |
| 21 | * Initial revision | |
| 22 | * | |
| 23 | * Revision 1.3 1995/04/05 15:13:58 adj | |
| 24 | * Initial alpha release | |
| 25 | * | |
| 26 | * Revision 1.2 1994/06/16 23:57:31 klemets | |
| 27 | * Mirrored all the fields in the configuration block. | |
| 28 | * | |
| 29 | * Revision 1.1 1994/06/02 20:25:34 klemets | |
| 30 | * Initial revision | |
| 31 | * | |
| 32 | * | |
| 33 | */ | |
| 34 | #ifndef _I82593_H | |
| 35 | #define _I82593_H | |
| 36 | ||
| 37 | /* Intel 82593 CSMA/CD Core LAN Controller */ | |
| 38 | ||
| 39 | /* Port 0 Command Register definitions */ | |
| 40 | ||
| 41 | /* Execution operations */ | |
| 42 | #define OP0_NOP 0 /* CHNL = 0 */ | |
| 43 | #define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */ | |
| 44 | #define OP0_IA_SETUP 1 | |
| 45 | #define OP0_CONFIGURE 2 | |
| 46 | #define OP0_MC_SETUP 3 | |
| 47 | #define OP0_TRANSMIT 4 | |
| 48 | #define OP0_TDR 5 | |
| 49 | #define OP0_DUMP 6 | |
| 50 | #define OP0_DIAGNOSE 7 | |
| 51 | #define OP0_TRANSMIT_NO_CRC 9 | |
| 52 | #define OP0_RETRANSMIT 12 | |
| 53 | #define OP0_ABORT 13 | |
| 54 | /* Reception operations */ | |
| 55 | #define OP0_RCV_ENABLE 8 | |
| 56 | #define OP0_RCV_DISABLE 10 | |
| 57 | #define OP0_STOP_RCV 11 | |
| 58 | /* Status pointer control operations */ | |
| 59 | #define OP0_FIX_PTR 15 /* CHNL = 1 */ | |
| 60 | #define OP0_RLS_PTR 15 /* CHNL = 0 */ | |
| 61 | #define OP0_RESET 14 | |
| 62 | ||
| 63 | #define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */ | |
| 64 | #define CR0_STATUS_0 0x00 | |
| 65 | #define CR0_STATUS_1 0x20 | |
| 66 | #define CR0_STATUS_2 0x40 | |
| 67 | #define CR0_STATUS_3 0x60 | |
| 68 | #define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */ | |
| 69 | ||
| 70 | /* Port 0 Status Register definitions */ | |
| 71 | ||
| 72 | #define SR0_NO_RESULT 0 /* dummy */ | |
| 73 | #define SR0_EVENT_MASK 0x0f | |
| 74 | #define SR0_IA_SETUP_DONE 1 | |
| 75 | #define SR0_CONFIGURE_DONE 2 | |
| 76 | #define SR0_MC_SETUP_DONE 3 | |
| 77 | #define SR0_TRANSMIT_DONE 4 | |
| 78 | #define SR0_TDR_DONE 5 | |
| 79 | #define SR0_DUMP_DONE 6 | |
| 80 | #define SR0_DIAGNOSE_PASSED 7 | |
| 81 | #define SR0_TRANSMIT_NO_CRC_DONE 9 | |
| 82 | #define SR0_RETRANSMIT_DONE 12 | |
| 83 | #define SR0_EXECUTION_ABORTED 13 | |
| 84 | #define SR0_END_OF_FRAME 8 | |
| 85 | #define SR0_RECEPTION_ABORTED 10 | |
| 86 | #define SR0_DIAGNOSE_FAILED 15 | |
| 87 | #define SR0_STOP_REG_HIT 11 | |
| 88 | ||
| 89 | #define SR0_CHNL (1 << 4) | |
| 90 | #define SR0_EXECUTION (1 << 5) | |
| 91 | #define SR0_RECEPTION (1 << 6) | |
| 92 | #define SR0_INTERRUPT (1 << 7) | |
| 93 | #define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION) | |
| 94 | ||
| 95 | #define SR3_EXEC_STATE_MASK 0x03 | |
| 96 | #define SR3_EXEC_IDLE 0 | |
| 97 | #define SR3_TX_ABORT_IN_PROGRESS 1 | |
| 98 | #define SR3_EXEC_ACTIVE 2 | |
| 99 | #define SR3_ABORT_IN_PROGRESS 3 | |
| 100 | #define SR3_EXEC_CHNL (1 << 2) | |
| 101 | #define SR3_STP_ON_NO_RSRC (1 << 3) | |
| 102 | #define SR3_RCVING_NO_RSRC (1 << 4) | |
| 103 | #define SR3_RCV_STATE_MASK 0x60 | |
| 104 | #define SR3_RCV_IDLE 0x00 | |
| 105 | #define SR3_RCV_READY 0x20 | |
| 106 | #define SR3_RCV_ACTIVE 0x40 | |
| 107 | #define SR3_RCV_STOP_IN_PROG 0x60 | |
| 108 | #define SR3_RCV_CHNL (1 << 7) | |
| 109 | ||
| 110 | /* Port 1 Command Register definitions */ | |
| 111 | ||
| 112 | #define OP1_NOP 0 | |
| 113 | #define OP1_SWIT_TO_PORT_0 1 | |
| 114 | #define OP1_INT_DISABLE 2 | |
| 115 | #define OP1_INT_ENABLE 3 | |
| 116 | #define OP1_SET_TS 5 | |
| 117 | #define OP1_RST_TS 7 | |
| 118 | #define OP1_POWER_DOWN 8 | |
| 119 | #define OP1_RESET_RING_MNGMT 11 | |
| 120 | #define OP1_RESET 14 | |
| 121 | #define OP1_SEL_RST 15 | |
| 122 | ||
| 123 | #define CR1_STATUS_4 0x00 | |
| 124 | #define CR1_STATUS_5 0x20 | |
| 125 | #define CR1_STATUS_6 0x40 | |
| 126 | #define CR1_STOP_REG_UPDATE (1 << 7) | |
| 127 | ||
| 128 | /* Receive frame status bits */ | |
| 129 | ||
| 130 | #define RX_RCLD (1 << 0) | |
| 131 | #define RX_IA_MATCH (1 << 1) | |
| 132 | #define RX_NO_AD_MATCH (1 << 2) | |
| 133 | #define RX_NO_SFD (1 << 3) | |
| 134 | #define RX_SRT_FRM (1 << 7) | |
| 135 | #define RX_OVRRUN (1 << 8) | |
| 136 | #define RX_ALG_ERR (1 << 10) | |
| 137 | #define RX_CRC_ERR (1 << 11) | |
| 138 | #define RX_LEN_ERR (1 << 12) | |
| 139 | #define RX_RCV_OK (1 << 13) | |
| 140 | #define RX_TYP_LEN (1 << 15) | |
| 141 | ||
| 142 | /* Transmit status bits */ | |
| 143 | ||
| 144 | #define TX_NCOL_MASK 0x0f | |
| 145 | #define TX_FRTL (1 << 4) | |
| 146 | #define TX_MAX_COL (1 << 5) | |
| 147 | #define TX_HRT_BEAT (1 << 6) | |
| 148 | #define TX_DEFER (1 << 7) | |
| 149 | #define TX_UND_RUN (1 << 8) | |
| 150 | #define TX_LOST_CTS (1 << 9) | |
| 151 | #define TX_LOST_CRS (1 << 10) | |
| 152 | #define TX_LTCOL (1 << 11) | |
| 153 | #define TX_OK (1 << 13) | |
| 154 | #define TX_COLL (1 << 15) | |
| 155 | ||
| 156 | struct i82593_conf_block { | |
| 157 | u_char fifo_limit : 4, | |
| 158 | forgnesi : 1, | |
| 159 | fifo_32 : 1, | |
| 160 | d6mod : 1, | |
| 161 | throttle_enb : 1; | |
| 162 | u_char throttle : 6, | |
| 163 | cntrxint : 1, | |
| 164 | contin : 1; | |
| 165 | u_char addr_len : 3, | |
| 166 | acloc : 1, | |
| 167 | preamb_len : 2, | |
| 168 | loopback : 2; | |
| 169 | u_char lin_prio : 3, | |
| 170 | tbofstop : 1, | |
| 171 | exp_prio : 3, | |
| 172 | bof_met : 1; | |
| 173 | u_char : 4, | |
| 174 | ifrm_spc : 4; | |
| 175 | u_char : 5, | |
| 176 | slottim_low : 3; | |
| 177 | u_char slottim_hi : 3, | |
| 178 | : 1, | |
| 179 | max_retr : 4; | |
| 180 | u_char prmisc : 1, | |
| 181 | bc_dis : 1, | |
| 182 | : 1, | |
| 183 | crs_1 : 1, | |
| 184 | nocrc_ins : 1, | |
| 185 | crc_1632 : 1, | |
| 186 | : 1, | |
| 187 | crs_cdt : 1; | |
| 188 | u_char cs_filter : 3, | |
| 189 | crs_src : 1, | |
| 190 | cd_filter : 3, | |
| 191 | : 1; | |
| 192 | u_char : 2, | |
| 193 | min_fr_len : 6; | |
| 194 | u_char lng_typ : 1, | |
| 195 | lng_fld : 1, | |
| 196 | rxcrc_xf : 1, | |
| 197 | artx : 1, | |
| 198 | sarec : 1, | |
| 199 | tx_jabber : 1, /* why is this called max_len in the manual? */ | |
| 200 | hash_1 : 1, | |
| 201 | lbpkpol : 1; | |
| 202 | u_char : 6, | |
| 203 | fdx : 1, | |
| 204 | : 1; | |
| 205 | u_char dummy_6 : 6, /* supposed to be ones */ | |
| 206 | mult_ia : 1, | |
| 207 | dis_bof : 1; | |
| 208 | u_char dummy_1 : 1, /* supposed to be one */ | |
| 209 | tx_ifs_retrig : 2, | |
| 210 | mc_all : 1, | |
| 211 | rcv_mon : 2, | |
| 212 | frag_acpt : 1, | |
| 213 | tstrttrs : 1; | |
| 214 | u_char fretx : 1, | |
| 215 | runt_eop : 1, | |
| 216 | hw_sw_pin : 1, | |
| 217 | big_endn : 1, | |
| 218 | syncrqs : 1, | |
| 219 | sttlen : 1, | |
| 220 | tx_eop : 1, | |
| 221 | rx_eop : 1; | |
| 222 | u_char rbuf_size : 5, | |
| 223 | rcvstop : 1, | |
| 224 | : 2; | |
| 225 | }; | |
| 226 | ||
| 227 | #define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ | |
| 228 | ||
| 229 | #endif /* _I82593_H */ |