[net-next-2.6.git] / include / asm-m32r / mappi3 / mappi3_pld.h

/*
 * include/asm-m32r/mappi3/mappi3_pld.h
 *
 * Definitions for Extended IO Logic on MAPPI3 board.
 *  based on m32700ut_pld.h
 *
 * This file is subject to the terms and conditions of the GNU General
 * Public License.  See the file "COPYING" in the main directory of
 * this archive for more details.
 *
 */

#ifndef _MAPPI3_PLD_H
#define _MAPPI3_PLD_H

#ifndef __ASSEMBLY__
/* FIXME:
 * Some C functions use non-cache address, so can't define non-cache address.
 */
#define PLD_BASE		(0x1c000000 /* + NONCACHE_OFFSET */)
#define __reg8			(volatile unsigned char *)
#define __reg16			(volatile unsigned short *)
#define __reg32			(volatile unsigned int *)
#else
#define PLD_BASE		(0x1c000000 + NONCACHE_OFFSET)
#define __reg8
#define __reg16
#define __reg32
#endif	/* __ASSEMBLY__ */

/* CFC */
#define	PLD_CFRSTCR		__reg16(PLD_BASE + 0x0000)
#define PLD_CFSTS		__reg16(PLD_BASE + 0x0002)
#define PLD_CFIMASK		__reg16(PLD_BASE + 0x0004)
#define PLD_CFBUFCR		__reg16(PLD_BASE + 0x0006)
#define PLD_CFCR0		__reg16(PLD_BASE + 0x000a)
#define PLD_CFCR1		__reg16(PLD_BASE + 0x000c)

/* MMC */
#define PLD_MMCCR		__reg16(PLD_BASE + 0x4000)
#define PLD_MMCMOD		__reg16(PLD_BASE + 0x4002)
#define PLD_MMCSTS		__reg16(PLD_BASE + 0x4006)
#define PLD_MMCBAUR		__reg16(PLD_BASE + 0x400a)
#define PLD_MMCCMDBCUT		__reg16(PLD_BASE + 0x400c)
#define PLD_MMCCDTBCUT		__reg16(PLD_BASE + 0x400e)
#define PLD_MMCDET		__reg16(PLD_BASE + 0x4010)
#define PLD_MMCWP		__reg16(PLD_BASE + 0x4012)
#define PLD_MMCWDATA		__reg16(PLD_BASE + 0x5000)
#define PLD_MMCRDATA		__reg16(PLD_BASE + 0x6000)
#define PLD_MMCCMDDATA		__reg16(PLD_BASE + 0x7000)
#define PLD_MMCRSPDATA		__reg16(PLD_BASE + 0x7006)

/* Power Control of MMC and CF */
#define PLD_CPCR		__reg16(PLD_BASE + 0x14000)

/* ICU */
#define M32R_IRQ_PC104		(5)	/* INT4(PC/104) */
#define M32R_IRQ_I2C		(28)	/* I2C-BUS */
#define PLD_IRQ_CFIREQ		(6)	/* INT5 CFC Card Interrupt */
#define PLD_IRQ_CFC_INSERT	(7)	/* INT6 CFC Card Insert & Eject */
#define PLD_IRQ_IDEIREQ		(8)	/* INT7 IDE Interrupt */
#define PLD_IRQ_MMCCARD		(43)	/* MMC Card Insert */
#define PLD_IRQ_MMCIRQ		(44)	/* MMC Transfer Done */

#if 0
/* LED Control
 *
 * 1: DIP swich side
 * 2: Reset switch side
 */
#define PLD_IOLEDCR		__reg16(PLD_BASE + 0x14002)
#define PLD_IOLED_1_ON		0x001
#define PLD_IOLED_1_OFF		0x000
#define PLD_IOLED_2_ON		0x002
#define PLD_IOLED_2_OFF		0x000

/* DIP Switch
 *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
 *  1: -
 *  2: -
 *  3: -
 */
#define PLD_IOSWSTS		__reg16(PLD_BASE + 0x14004)
#define	PLD_IOSWSTS_IOSW2	0x0200
#define	PLD_IOSWSTS_IOSW1	0x0100
#define	PLD_IOSWSTS_IOWP0	0x0001

#endif

/* CRC */
#define PLD_CRC7DATA		__reg16(PLD_BASE + 0x18000)
#define PLD_CRC7INDATA		__reg16(PLD_BASE + 0x18002)
#define PLD_CRC16DATA		__reg16(PLD_BASE + 0x18004)
#define PLD_CRC16INDATA		__reg16(PLD_BASE + 0x18006)
#define PLD_CRC16ADATA		__reg16(PLD_BASE + 0x18008)
#define PLD_CRC16AINDATA	__reg16(PLD_BASE + 0x1800a)

#if 0
/* RTC */
#define PLD_RTCCR		__reg16(PLD_BASE + 0x1c000)
#define PLD_RTCBAUR		__reg16(PLD_BASE + 0x1c002)
#define PLD_RTCWRDATA		__reg16(PLD_BASE + 0x1c004)
#define PLD_RTCRDDATA		__reg16(PLD_BASE + 0x1c006)
#define PLD_RTCRSTODT		__reg16(PLD_BASE + 0x1c008)

/* SIO0 */
#define PLD_ESIO0CR		__reg16(PLD_BASE + 0x20000)
#define	PLD_ESIO0CR_TXEN	0x0001
#define	PLD_ESIO0CR_RXEN	0x0002
#define PLD_ESIO0MOD0		__reg16(PLD_BASE + 0x20002)
#define	PLD_ESIO0MOD0_CTSS	0x0040
#define	PLD_ESIO0MOD0_RTSS	0x0080
#define PLD_ESIO0MOD1		__reg16(PLD_BASE + 0x20004)
#define	PLD_ESIO0MOD1_LMFS	0x0010
#define PLD_ESIO0STS		__reg16(PLD_BASE + 0x20006)
#define	PLD_ESIO0STS_TEMP	0x0001
#define	PLD_ESIO0STS_TXCP	0x0002
#define	PLD_ESIO0STS_RXCP	0x0004
#define	PLD_ESIO0STS_TXSC	0x0100
#define	PLD_ESIO0STS_RXSC	0x0200
#define PLD_ESIO0STS_TXREADY	(PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
#define PLD_ESIO0INTCR		__reg16(PLD_BASE + 0x20008)
#define	PLD_ESIO0INTCR_TXIEN	0x0002
#define	PLD_ESIO0INTCR_RXCEN	0x0004
#define PLD_ESIO0BAUR		__reg16(PLD_BASE + 0x2000a)
#define PLD_ESIO0TXB		__reg16(PLD_BASE + 0x2000c)
#define PLD_ESIO0RXB		__reg16(PLD_BASE + 0x2000e)

/* SIM Card */
#define PLD_SCCR		__reg16(PLD_BASE + 0x38000)
#define PLD_SCMOD		__reg16(PLD_BASE + 0x38004)
#define PLD_SCSTS		__reg16(PLD_BASE + 0x38006)
#define PLD_SCINTCR		__reg16(PLD_BASE + 0x38008)
#define PLD_SCBAUR		__reg16(PLD_BASE + 0x3800a)
#define PLD_SCTXB		__reg16(PLD_BASE + 0x3800c)
#define PLD_SCRXB		__reg16(PLD_BASE + 0x3800e)

#endif

/* Reset Control */
#define PLD_REBOOT		__reg16(PLD_BASE + 0x38000)

#endif	/* _MAPPI3_PLD.H */
Commit	Line	Data
23680863	1	/*
f30c2269	2	* include/asm-m32r/mappi3/mappi3_pld.h
23680863 HT	3	*
	4	* Definitions for Extended IO Logic on MAPPI3 board.
	5	* based on m32700ut_pld.h
	6	*
	7	* This file is subject to the terms and conditions of the GNU General
	8	* Public License. See the file "COPYING" in the main directory of
	9	* this archive for more details.
	10	*
	11	*/
	12
	13	#ifndef _MAPPI3_PLD_H
	14	#define _MAPPI3_PLD_H
	15
	16	#ifndef __ASSEMBLY__
	17	/* FIXME:
	18	* Some C functions use non-cache address, so can't define non-cache address.
	19	*/
	20	#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */)
	21	#define __reg8 (volatile unsigned char *)
	22	#define __reg16 (volatile unsigned short *)
	23	#define __reg32 (volatile unsigned int *)
	24	#else
	25	#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET)
	26	#define __reg8
	27	#define __reg16
	28	#define __reg32
	29	#endif /* __ASSEMBLY__ */
	30
	31	/* CFC */
	32	#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
	33	#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
	34	#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
	35	#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
	36	#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
	37	#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
	38
	39	/* MMC */
	40	#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
	41	#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
	42	#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
	43	#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
	44	#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
	45	#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
	46	#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
	47	#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
	48	#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
	49	#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
	50	#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
	51	#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
	52
	53	/* Power Control of MMC and CF */
	54	#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
	55
0d34c86c HT	56	/* ICU */
	57	#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
	58	#define M32R_IRQ_I2C (28) /* I2C-BUS */
	59	#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
	60	#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */
	61	#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */
	62	#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
	63	#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
23680863 HT	64
	65	#if 0
	66	/* LED Control
	67	*
	68	* 1: DIP swich side
	69	* 2: Reset switch side
	70	*/
	71	#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
	72	#define PLD_IOLED_1_ON 0x001
	73	#define PLD_IOLED_1_OFF 0x000
	74	#define PLD_IOLED_2_ON 0x002
	75	#define PLD_IOLED_2_OFF 0x000
	76
	77	/* DIP Switch
	78	* 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
	79	* 1: -
	80	* 2: -
	81	* 3: -
	82	*/
	83	#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
	84	#define PLD_IOSWSTS_IOSW2 0x0200
	85	#define PLD_IOSWSTS_IOSW1 0x0100
	86	#define PLD_IOSWSTS_IOWP0 0x0001
	87
	88	#endif
	89
	90	/* CRC */
	91	#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
	92	#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
	93	#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
	94	#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
	95	#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
	96	#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
	97
23680863 HT	98	#if 0
	99	/* RTC */
	100	#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
	101	#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
	102	#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
	103	#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
	104	#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
	105
	106	/* SIO0 */
	107	#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
	108	#define PLD_ESIO0CR_TXEN 0x0001
	109	#define PLD_ESIO0CR_RXEN 0x0002
	110	#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
	111	#define PLD_ESIO0MOD0_CTSS 0x0040
	112	#define PLD_ESIO0MOD0_RTSS 0x0080
	113	#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
	114	#define PLD_ESIO0MOD1_LMFS 0x0010
	115	#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
	116	#define PLD_ESIO0STS_TEMP 0x0001
	117	#define PLD_ESIO0STS_TXCP 0x0002
	118	#define PLD_ESIO0STS_RXCP 0x0004
	119	#define PLD_ESIO0STS_TXSC 0x0100
	120	#define PLD_ESIO0STS_RXSC 0x0200
	121	#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP \| PLD_ESIO0STS_TEMP)
	122	#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
	123	#define PLD_ESIO0INTCR_TXIEN 0x0002
	124	#define PLD_ESIO0INTCR_RXCEN 0x0004
	125	#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
	126	#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
	127	#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
	128
	129	/* SIM Card */
	130	#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
	131	#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
	132	#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
	133	#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
	134	#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
	135	#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
	136	#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
	137
	138	#endif
	139
0d34c86c HT	140	/* Reset Control */
	141	#define PLD_REBOOT __reg16(PLD_BASE + 0x38000)
	142
23680863	143	#endif /* _MAPPI3_PLD.H */