]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
6 | ||
7 | config FB | |
8 | tristate "Support for frame buffer devices" | |
9 | ---help--- | |
10 | The frame buffer device provides an abstraction for the graphics | |
11 | hardware. It represents the frame buffer of some video hardware and | |
12 | allows application software to access the graphics hardware through | |
13 | a well-defined interface, so the software doesn't need to know | |
14 | anything about the low-level (hardware register) stuff. | |
15 | ||
16 | Frame buffer devices work identically across the different | |
17 | architectures supported by Linux and make the implementation of | |
18 | application programs easier and more portable; at this point, an X | |
19 | server exists which uses the frame buffer device exclusively. | |
20 | On several non-X86 architectures, the frame buffer device is the | |
21 | only way to use the graphics hardware. | |
22 | ||
23 | The device is accessed through special device nodes, usually located | |
24 | in the /dev directory, i.e. /dev/fb*. | |
25 | ||
26 | You need an utility program called fbset to make full use of frame | |
27 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
28 | and the Framebuffer-HOWTO at | |
29 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
30 | information. | |
31 | ||
32 | Say Y here and to the driver for your graphics board below if you | |
33 | are compiling a kernel for a non-x86 architecture. | |
34 | ||
35 | If you are compiling for the x86 architecture, you can say Y if you | |
36 | want to play with it, but it is not essential. Please note that | |
37 | running graphical applications that directly touch the hardware | |
38 | (e.g. an accelerated X server) and that are not frame buffer | |
39 | device-aware may cause unexpected results. If unsure, say N. | |
40 | ||
41 | config FB_CFB_FILLRECT | |
42 | tristate | |
43 | depends on FB | |
44 | default n | |
45 | ---help--- | |
46 | Include the cfb_fillrect function for generic software rectangle | |
47 | filling. This is used by drivers that don't provide their own | |
48 | (accelerated) version. | |
49 | ||
50 | config FB_CFB_COPYAREA | |
51 | tristate | |
52 | depends on FB | |
53 | default n | |
54 | ---help--- | |
55 | Include the cfb_copyarea function for generic software area copying. | |
56 | This is used by drivers that don't provide their own (accelerated) | |
57 | version. | |
58 | ||
59 | config FB_CFB_IMAGEBLIT | |
60 | tristate | |
61 | depends on FB | |
62 | default n | |
63 | ---help--- | |
64 | Include the cfb_imageblit function for generic software image | |
65 | blitting. This is used by drivers that don't provide their own | |
66 | (accelerated) version. | |
67 | ||
1da177e4 LT |
68 | config FB_MACMODES |
69 | tristate | |
70 | depends on FB | |
71 | default n | |
72 | ||
59153f7d AD |
73 | config FB_FIRMWARE_EDID |
74 | bool "Enable firmware EDID" | |
75 | depends on FB | |
76 | default y | |
77 | ---help--- | |
78 | This enables access to the EDID transferred from the firmware. | |
79 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
80 | transfers do not work for your driver and if you are using | |
81 | nvidiafb, i810fb or savagefb. | |
82 | ||
83 | In general, choosing Y for this option is safe. If you | |
84 | experience extremely long delays while booting before you get | |
85 | something on your display, try setting this to N. Matrox cards in | |
86 | combination with certain motherboards and monitors are known to | |
87 | suffer from this problem. | |
88 | ||
1da177e4 LT |
89 | config FB_MODE_HELPERS |
90 | bool "Enable Video Mode Handling Helpers" | |
91 | depends on FB | |
92 | default n | |
93 | ---help--- | |
94 | This enables functions for handling video modes using the | |
95 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
96 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
97 | your driver does not take advantage of this feature, choosing Y will | |
98 | just increase the kernel size by about 5K. | |
99 | ||
100 | config FB_TILEBLITTING | |
101 | bool "Enable Tile Blitting Support" | |
102 | depends on FB | |
103 | default n | |
104 | ---help--- | |
105 | This enables tile blitting. Tile blitting is a drawing technique | |
106 | where the screen is divided into rectangular sections (tiles), whereas | |
107 | the standard blitting divides the screen into pixels. Because the | |
108 | default drawing element is a tile, drawing functions will be passed | |
109 | parameters in terms of number of tiles instead of number of pixels. | |
110 | For example, to draw a single character, instead of using bitmaps, | |
111 | an index to an array of bitmaps will be used. To clear or move a | |
112 | rectangular section of a screen, the rectangle will be described in | |
113 | terms of number of tiles in the x- and y-axis. | |
114 | ||
115 | This is particularly important to one driver, matroxfb. If | |
116 | unsure, say N. | |
117 | ||
118 | config FB_CIRRUS | |
119 | tristate "Cirrus Logic support" | |
120 | depends on FB && (ZORRO || PCI) | |
121 | select FB_CFB_FILLRECT | |
122 | select FB_CFB_COPYAREA | |
123 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
124 | ---help--- |
125 | This enables support for Cirrus Logic GD542x/543x based boards on | |
126 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
127 | ||
128 | If you have a PCI-based system, this enables support for these | |
129 | chips: GD-543x, GD-544x, GD-5480. | |
130 | ||
131 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
132 | ||
133 | Say N unless you have such a graphics board or plan to get one | |
134 | before you next recompile the kernel. | |
135 | ||
136 | config FB_PM2 | |
137 | tristate "Permedia2 support" | |
138 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
139 | select FB_CFB_FILLRECT | |
140 | select FB_CFB_COPYAREA | |
141 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
142 | help |
143 | This is the frame buffer device driver for the Permedia2 AGP frame | |
144 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
145 | product page at | |
146 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
147 | ||
148 | config FB_PM2_FIFO_DISCONNECT | |
149 | bool "enable FIFO disconnect feature" | |
150 | depends on FB_PM2 && PCI | |
151 | help | |
152 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
153 | ||
154 | config FB_ARMCLCD | |
155 | tristate "ARM PrimeCell PL110 support" | |
156 | depends on FB && ARM && ARM_AMBA | |
157 | select FB_CFB_FILLRECT | |
158 | select FB_CFB_COPYAREA | |
159 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
160 | help |
161 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
162 | Colour LCD controller. ARM PrimeCells provide the building | |
163 | blocks for System on a Chip devices. | |
164 | ||
165 | If you want to compile this as a module (=code which can be | |
166 | inserted into and removed from the running kernel), say M | |
167 | here and read <file:Documentation/modules.txt>. The module | |
168 | will be called amba-clcd. | |
169 | ||
170 | config FB_ACORN | |
171 | bool "Acorn VIDC support" | |
172 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
173 | select FB_CFB_FILLRECT | |
174 | select FB_CFB_COPYAREA | |
175 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
176 | help |
177 | This is the frame buffer device driver for the Acorn VIDC graphics | |
178 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
179 | unsure, say N. | |
180 | ||
181 | config FB_CLPS711X | |
182 | bool "CLPS711X LCD support" | |
183 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
184 | select FB_CFB_FILLRECT | |
185 | select FB_CFB_COPYAREA | |
186 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
187 | help |
188 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
189 | EP7212 processors. | |
1da177e4 LT |
190 | |
191 | config FB_SA1100 | |
192 | bool "SA-1100 LCD support" | |
193 | depends on (FB = y) && ARM && ARCH_SA1100 | |
194 | select FB_CFB_FILLRECT | |
195 | select FB_CFB_COPYAREA | |
196 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
197 | help |
198 | This is a framebuffer device for the SA-1100 LCD Controller. | |
199 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
200 | devices. | |
201 | ||
202 | If you plan to use the LCD display with your SA-1100 system, say | |
203 | Y here. | |
204 | ||
7c2f891c SH |
205 | config FB_IMX |
206 | tristate "Motorola i.MX LCD support" | |
207 | depends on FB && ARM && ARCH_IMX | |
208 | select FB_CFB_FILLRECT | |
209 | select FB_CFB_COPYAREA | |
210 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 211 | |
1da177e4 LT |
212 | config FB_CYBER2000 |
213 | tristate "CyberPro 2000/2010/5000 support" | |
214 | depends on FB && PCI && (BROKEN || !SPARC64) | |
215 | select FB_CFB_FILLRECT | |
216 | select FB_CFB_COPYAREA | |
217 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
218 | help |
219 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
220 | VGA chips used in the Rebel.com Netwinder and other machines. | |
221 | Say Y if you have a NetWinder or a graphics card containing this | |
222 | device, otherwise say N. | |
223 | ||
224 | config FB_APOLLO | |
225 | bool | |
226 | depends on (FB = y) && APOLLO | |
227 | default y | |
228 | select FB_CFB_FILLRECT | |
229 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
230 | |
231 | config FB_Q40 | |
232 | bool | |
233 | depends on (FB = y) && Q40 | |
234 | default y | |
235 | select FB_CFB_FILLRECT | |
236 | select FB_CFB_COPYAREA | |
237 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
238 | |
239 | config FB_AMIGA | |
240 | tristate "Amiga native chipset support" | |
241 | depends on FB && AMIGA | |
1da177e4 LT |
242 | help |
243 | This is the frame buffer device driver for the builtin graphics | |
244 | chipset found in Amigas. | |
245 | ||
246 | To compile this driver as a module, choose M here: the | |
247 | module will be called amifb. | |
248 | ||
249 | config FB_AMIGA_OCS | |
250 | bool "Amiga OCS chipset support" | |
251 | depends on FB_AMIGA | |
252 | help | |
253 | This enables support for the original Agnus and Denise video chips, | |
254 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
255 | to run Linux on any of these systems, say Y; otherwise say N. | |
256 | ||
257 | config FB_AMIGA_ECS | |
258 | bool "Amiga ECS chipset support" | |
259 | depends on FB_AMIGA | |
260 | help | |
261 | This enables support for the Enhanced Chip Set, found in later | |
262 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
263 | you intend to run Linux on any of these systems, say Y; otherwise | |
264 | say N. | |
265 | ||
266 | config FB_AMIGA_AGA | |
267 | bool "Amiga AGA chipset support" | |
268 | depends on FB_AMIGA | |
269 | help | |
270 | This enables support for the Advanced Graphics Architecture (also | |
271 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
272 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
273 | otherwise say N. | |
274 | ||
275 | config FB_CYBER | |
276 | tristate "Amiga CyberVision 64 support" | |
277 | depends on FB && ZORRO && BROKEN | |
278 | select FB_CFB_FILLRECT | |
279 | select FB_CFB_COPYAREA | |
280 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
281 | help |
282 | This enables support for the Cybervision 64 graphics card from | |
283 | Phase5. Please note that its use is not all that intuitive (i.e. if | |
284 | you have any questions, be sure to ask!). Say N unless you have a | |
285 | Cybervision 64 or plan to get one before you next recompile the | |
286 | kernel. Please note that this driver DOES NOT support the | |
287 | Cybervision 64/3D card, as they use incompatible video chips. | |
288 | ||
289 | config FB_VIRGE | |
290 | bool "Amiga CyberVision 64/3D support " | |
291 | depends on (FB = y) && ZORRO && BROKEN | |
292 | select FB_CFB_FILLRECT | |
293 | select FB_CFB_COPYAREA | |
294 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
295 | help |
296 | This enables support for the Cybervision 64/3D graphics card from | |
297 | Phase5. Please note that its use is not all that intuitive (i.e. if | |
298 | you have any questions, be sure to ask!). Say N unless you have a | |
299 | Cybervision 64/3D or plan to get one before you next recompile the | |
300 | kernel. Please note that this driver DOES NOT support the older | |
301 | Cybervision 64 card, as they use incompatible video chips. | |
302 | ||
303 | config FB_RETINAZ3 | |
304 | tristate "Amiga Retina Z3 support" | |
305 | depends on (FB = y) && ZORRO && BROKEN | |
306 | help | |
307 | This enables support for the Retina Z3 graphics card. Say N unless | |
308 | you have a Retina Z3 or plan to get one before you next recompile | |
309 | the kernel. | |
310 | ||
311 | config FB_FM2 | |
312 | bool "Amiga FrameMaster II/Rainbow II support" | |
313 | depends on (FB = y) && ZORRO | |
314 | select FB_CFB_FILLRECT | |
315 | select FB_CFB_COPYAREA | |
316 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
317 | help |
318 | This is the frame buffer device driver for the Amiga FrameMaster | |
319 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
320 | ||
1154ea7d JK |
321 | config FB_ARC |
322 | tristate "Arc Monochrome LCD board support" | |
323 | depends on FB && X86 | |
324 | select FB_CFB_FILLRECT | |
325 | select FB_CFB_COPYAREA | |
326 | select FB_CFB_IMAGEBLIT | |
1154ea7d JK |
327 | help |
328 | This enables support for the Arc Monochrome LCD board. The board | |
329 | is based on the KS-108 lcd controller and is typically a matrix | |
330 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
331 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
332 | interface (8 bit data, 8 bit control). If you anticpate using | |
333 | this driver, say Y or M; otherwise say N. You must specify the | |
334 | GPIO IO address to be used for setting control and data. | |
335 | ||
1da177e4 LT |
336 | config FB_ATARI |
337 | bool "Atari native chipset support" | |
338 | depends on (FB = y) && ATARI && BROKEN | |
339 | help | |
340 | This is the frame buffer device driver for the builtin graphics | |
341 | chipset found in Ataris. | |
342 | ||
343 | config FB_OF | |
344 | bool "Open Firmware frame buffer device support" | |
345 | depends on (FB = y) && (PPC64 || PPC_OF) | |
346 | select FB_CFB_FILLRECT | |
347 | select FB_CFB_COPYAREA | |
348 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
349 | select FB_MACMODES |
350 | help | |
351 | Say Y if you want support with Open Firmware for your graphics | |
352 | board. | |
353 | ||
354 | config FB_CONTROL | |
355 | bool "Apple \"control\" display support" | |
356 | depends on (FB = y) && PPC_PMAC | |
357 | select FB_CFB_FILLRECT | |
358 | select FB_CFB_COPYAREA | |
359 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
360 | select FB_MACMODES |
361 | help | |
362 | This driver supports a frame buffer for the graphics adapter in the | |
363 | Power Macintosh 7300 and others. | |
364 | ||
365 | config FB_PLATINUM | |
366 | bool "Apple \"platinum\" display support" | |
367 | depends on (FB = y) && PPC_PMAC | |
368 | select FB_CFB_FILLRECT | |
369 | select FB_CFB_COPYAREA | |
370 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
371 | select FB_MACMODES |
372 | help | |
373 | This driver supports a frame buffer for the "platinum" graphics | |
374 | adapter in some Power Macintoshes. | |
375 | ||
376 | config FB_VALKYRIE | |
377 | bool "Apple \"valkyrie\" display support" | |
378 | depends on (FB = y) && (MAC || PPC_PMAC) | |
379 | select FB_CFB_FILLRECT | |
380 | select FB_CFB_COPYAREA | |
381 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
382 | select FB_MACMODES |
383 | help | |
384 | This driver supports a frame buffer for the "valkyrie" graphics | |
385 | adapter in some Power Macintoshes. | |
386 | ||
387 | config FB_CT65550 | |
388 | bool "Chips 65550 display support" | |
389 | depends on (FB = y) && PPC | |
390 | select FB_CFB_FILLRECT | |
391 | select FB_CFB_COPYAREA | |
392 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
393 | help |
394 | This is the frame buffer device driver for the Chips & Technologies | |
395 | 65550 graphics chip in PowerBooks. | |
396 | ||
397 | config FB_ASILIANT | |
e65c0850 | 398 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
399 | depends on (FB = y) && PCI |
400 | select FB_CFB_FILLRECT | |
401 | select FB_CFB_COPYAREA | |
402 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
403 | help |
404 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
405 | |
406 | config FB_IMSTT | |
407 | bool "IMS Twin Turbo display support" | |
408 | depends on (FB = y) && PCI | |
409 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
410 | select FB_MACMODES if PPC |
411 | help | |
412 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
413 | many Macintosh and compatible computers. | |
414 | ||
1da177e4 LT |
415 | config FB_VGA16 |
416 | tristate "VGA 16-color graphics support" | |
417 | depends on FB && (X86 || PPC) | |
418 | select FB_CFB_FILLRECT | |
419 | select FB_CFB_COPYAREA | |
420 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
421 | help |
422 | This is the frame buffer device driver for VGA 16 color graphic | |
423 | cards. Say Y if you have such a card. | |
424 | ||
425 | To compile this driver as a module, choose M here: the | |
426 | module will be called vga16fb. | |
427 | ||
428 | config FB_STI | |
429 | tristate "HP STI frame buffer device support" | |
430 | depends on FB && PARISC | |
431 | select FB_CFB_FILLRECT | |
432 | select FB_CFB_COPYAREA | |
433 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
434 | default y |
435 | ---help--- | |
436 | STI refers to the HP "Standard Text Interface" which is a set of | |
437 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
438 | Enabling this option will implement the linux framebuffer device | |
439 | using calls to the STI BIOS routines for initialisation. | |
440 | ||
441 | If you enable this option, you will get a planar framebuffer device | |
442 | /dev/fb which will work on the most common HP graphic cards of the | |
443 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
444 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
445 | ||
446 | It is safe to enable this option, so you should probably say "Y". | |
447 | ||
448 | config FB_MAC | |
449 | bool "Generic Macintosh display support" | |
450 | depends on (FB = y) && MAC | |
451 | select FB_CFB_FILLRECT | |
452 | select FB_CFB_COPYAREA | |
453 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
454 | select FB_MACMODES |
455 | ||
456 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
457 | config FB_HP300 | |
458 | bool | |
459 | depends on (FB = y) && HP300 | |
460 | select FB_CFB_FILLRECT | |
461 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
462 | default y |
463 | ||
464 | config FB_TGA | |
465 | tristate "TGA framebuffer support" | |
466 | depends on FB && ALPHA | |
467 | select FB_CFB_FILLRECT | |
468 | select FB_CFB_COPYAREA | |
469 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
470 | help |
471 | This is the frame buffer device driver for generic TGA graphic | |
472 | cards. Say Y if you have one of those. | |
473 | ||
474 | config FB_VESA | |
475 | bool "VESA VGA graphics support" | |
0d078f6f | 476 | depends on (FB = y) && X86 |
1da177e4 LT |
477 | select FB_CFB_FILLRECT |
478 | select FB_CFB_COPYAREA | |
479 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
480 | help |
481 | This is the frame buffer device driver for generic VESA 2.0 | |
482 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
483 | You will get a boot time penguin logo at no additional cost. Please | |
484 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
485 | ||
486 | config VIDEO_SELECT | |
487 | bool | |
488 | depends on FB_VESA | |
489 | default y | |
490 | ||
491 | config FB_HGA | |
492 | tristate "Hercules mono graphics support" | |
493 | depends on FB && X86 | |
494 | select FB_CFB_FILLRECT | |
495 | select FB_CFB_COPYAREA | |
496 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
497 | help |
498 | Say Y here if you have a Hercules mono graphics card. | |
499 | ||
500 | To compile this driver as a module, choose M here: the | |
501 | module will be called hgafb. | |
502 | ||
503 | As this card technology is 15 years old, most people will answer N | |
504 | here. | |
505 | ||
506 | config FB_HGA_ACCEL | |
507 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
508 | depends on FB_HGA && EXPERIMENTAL | |
509 | ---help--- | |
510 | This will compile the Hercules mono graphics with | |
511 | acceleration functions. | |
512 | ||
513 | ||
514 | config VIDEO_SELECT | |
515 | bool | |
516 | depends on (FB = y) && X86 | |
517 | default y | |
518 | ||
519 | config FB_SGIVW | |
520 | tristate "SGI Visual Workstation framebuffer support" | |
521 | depends on FB && X86_VISWS | |
522 | select FB_CFB_FILLRECT | |
523 | select FB_CFB_COPYAREA | |
524 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
525 | help |
526 | SGI Visual Workstation support for framebuffer graphics. | |
527 | ||
528 | config FB_GBE | |
529 | bool "SGI Graphics Backend frame buffer support" | |
530 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
531 | select FB_CFB_FILLRECT | |
532 | select FB_CFB_COPYAREA | |
533 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
534 | help |
535 | This is the frame buffer device driver for SGI Graphics Backend. | |
536 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
537 | ||
538 | config FB_GBE_MEM | |
539 | int "Video memory size in MB" | |
540 | depends on FB_GBE | |
80c410dc | 541 | default 4 |
1da177e4 LT |
542 | help |
543 | This is the amount of memory reserved for the framebuffer, | |
544 | which can be any value between 1MB and 8MB. | |
545 | ||
1da177e4 LT |
546 | config FB_SUN3 |
547 | bool "Sun3 framebuffer support" | |
548 | depends on (FB = y) && (SUN3 || SUN3X) && BROKEN | |
549 | ||
1a571986 MF |
550 | config FB_SBUS |
551 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 552 | depends on (FB = y) && SPARC |
1a571986 MF |
553 | help |
554 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
555 | ||
1da177e4 LT |
556 | config FB_BW2 |
557 | bool "BWtwo support" | |
0b57ee9e | 558 | depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) |
1da177e4 LT |
559 | select FB_CFB_FILLRECT |
560 | select FB_CFB_COPYAREA | |
561 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
562 | help |
563 | This is the frame buffer device driver for the BWtwo frame buffer. | |
564 | ||
565 | config FB_CG3 | |
566 | bool "CGthree support" | |
0b57ee9e | 567 | depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) |
1a571986 | 568 | select FB_CFB_FILLRECT |
1da177e4 LT |
569 | select FB_CFB_COPYAREA |
570 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
571 | help |
572 | This is the frame buffer device driver for the CGthree frame buffer. | |
573 | ||
574 | config FB_CG6 | |
575 | bool "CGsix (GX,TurboGX) support" | |
0b57ee9e | 576 | depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) |
1da177e4 LT |
577 | select FB_CFB_COPYAREA |
578 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
579 | help |
580 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
581 | frame buffer. | |
582 | ||
583 | config FB_PVR2 | |
584 | tristate "NEC PowerVR 2 display support" | |
585 | depends on FB && SH_DREAMCAST | |
586 | select FB_CFB_FILLRECT | |
587 | select FB_CFB_COPYAREA | |
588 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
589 | ---help--- |
590 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
591 | run linux on your Dreamcast, you will have to say Y here. | |
592 | This driver may or may not work on other PowerVR 2 cards, but is | |
593 | totally untested. Use at your own risk. If unsure, say N. | |
594 | ||
595 | To compile this driver as a module, choose M here: the | |
596 | module will be called pvr2fb. | |
597 | ||
598 | You can pass several parameters to the driver at boot time or at | |
599 | module load time. The parameters look like "video=pvr2:XXX", where | |
600 | the meaning of XXX can be found at the end of the main source file | |
601 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
602 | <file:Documentation/fb/pvr2fb.txt>. | |
603 | ||
604 | config FB_EPSON1355 | |
605 | bool "Epson 1355 framebuffer support" | |
606 | depends on (FB = y) && (SUPERH || ARCH_CEIVA) | |
607 | select FB_CFB_FILLRECT | |
608 | select FB_CFB_COPYAREA | |
609 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
610 | help |
611 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
612 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
613 | framebuffer. Product specs at | |
614 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
615 | ||
ecc41d5e RD |
616 | config FB_S1D13XXX |
617 | tristate "Epson S1D13XXX framebuffer support" | |
618 | depends on FB | |
619 | select FB_CFB_FILLRECT | |
620 | select FB_CFB_COPYAREA | |
621 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
622 | help |
623 | Support for S1D13XXX framebuffer device family (currently only | |
624 | working with S1D13806). Product specs at | |
625 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
626 | ||
1da177e4 LT |
627 | config FB_NVIDIA |
628 | tristate "nVidia Framebuffer Support" | |
629 | depends on FB && PCI | |
630 | select I2C_ALGOBIT if FB_NVIDIA_I2C | |
631 | select I2C if FB_NVIDIA_I2C | |
632 | select FB_MODE_HELPERS | |
633 | select FB_CFB_FILLRECT | |
634 | select FB_CFB_COPYAREA | |
635 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
636 | help |
637 | This driver supports graphics boards with the nVidia chips, TNT | |
638 | and newer. For very old chipsets, such as the RIVA128, then use | |
639 | the rivafb. | |
640 | Say Y if you have such a graphics board. | |
641 | ||
642 | To compile this driver as a module, choose M here: the | |
643 | module will be called nvidiafb. | |
644 | ||
645 | config FB_NVIDIA_I2C | |
646 | bool "Enable DDC Support" | |
85f1503a | 647 | depends on FB_NVIDIA |
1da177e4 LT |
648 | help |
649 | This enables I2C support for nVidia Chipsets. This is used | |
650 | only for getting EDID information from the attached display | |
651 | allowing for robust video mode handling and switching. | |
652 | ||
653 | Because fbdev-2.6 requires that drivers must be able to | |
654 | independently validate video mode parameters, you should say Y | |
655 | here. | |
656 | ||
657 | config FB_RIVA | |
658 | tristate "nVidia Riva support" | |
659 | depends on FB && PCI | |
660 | select I2C_ALGOBIT if FB_RIVA_I2C | |
661 | select I2C if FB_RIVA_I2C | |
662 | select FB_MODE_HELPERS | |
663 | select FB_CFB_FILLRECT | |
664 | select FB_CFB_COPYAREA | |
665 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
666 | help |
667 | This driver supports graphics boards with the nVidia Riva/Geforce | |
668 | chips. | |
669 | Say Y if you have such a graphics board. | |
670 | ||
671 | To compile this driver as a module, choose M here: the | |
672 | module will be called rivafb. | |
673 | ||
674 | config FB_RIVA_I2C | |
675 | bool "Enable DDC Support" | |
676 | depends on FB_RIVA | |
677 | help | |
678 | This enables I2C support for nVidia Chipsets. This is used | |
679 | only for getting EDID information from the attached display | |
680 | allowing for robust video mode handling and switching. | |
681 | ||
682 | Because fbdev-2.6 requires that drivers must be able to | |
683 | independently validate video mode parameters, you should say Y | |
684 | here. | |
685 | ||
686 | config FB_RIVA_DEBUG | |
687 | bool "Lots of debug output from Riva(nVidia) driver" | |
688 | depends on FB_RIVA | |
689 | default n | |
690 | help | |
691 | Say Y here if you want the Riva driver to output all sorts | |
692 | of debugging informations to provide to the maintainer when | |
693 | something goes wrong. | |
694 | ||
695 | config FB_I810 | |
696 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 697 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
698 | select AGP |
699 | select AGP_INTEL | |
700 | select FB_MODE_HELPERS | |
701 | select FB_CFB_FILLRECT | |
702 | select FB_CFB_COPYAREA | |
703 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
704 | help |
705 | This driver supports the on-board graphics built in to the Intel 810 | |
706 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
707 | ||
708 | To compile this driver as a module, choose M here: the | |
709 | module will be called i810fb. | |
710 | ||
711 | For more information, please read | |
712 | <file:Documentation/fb/intel810.txt> | |
713 | ||
714 | config FB_I810_GTF | |
715 | bool "use VESA Generalized Timing Formula" | |
716 | depends on FB_I810 | |
717 | help | |
718 | If you say Y, then the VESA standard, Generalized Timing Formula | |
719 | or GTF, will be used to calculate the required video timing values | |
720 | per video mode. Since the GTF allows nondiscrete timings | |
721 | (nondiscrete being a range of values as opposed to discrete being a | |
722 | set of values), you'll be able to use any combination of horizontal | |
723 | and vertical resolutions, and vertical refresh rates without having | |
724 | to specify your own timing parameters. This is especially useful | |
725 | to maximize the performance of an aging display, or if you just | |
726 | have a display with nonstandard dimensions. A VESA compliant | |
727 | monitor is recommended, but can still work with non-compliant ones. | |
728 | If you need or want this, then select this option. The timings may | |
729 | not be compliant with Intel's recommended values. Use at your own | |
730 | risk. | |
731 | ||
732 | If you say N, the driver will revert to discrete video timings | |
733 | using a set recommended by Intel in their documentation. | |
734 | ||
735 | If unsure, say N. | |
736 | ||
74f6ae84 AD |
737 | config FB_I810_I2C |
738 | bool "Enable DDC Support" | |
db84502b AD |
739 | depends on FB_I810 && FB_I810_GTF |
740 | select I2C | |
74f6ae84 AD |
741 | select I2C_ALGOBIT |
742 | help | |
743 | ||
1da177e4 LT |
744 | config FB_INTEL |
745 | tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" | |
0d078f6f | 746 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
747 | select AGP |
748 | select AGP_INTEL | |
749 | select FB_MODE_HELPERS | |
750 | select FB_CFB_FILLRECT | |
751 | select FB_CFB_COPYAREA | |
752 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
753 | help |
754 | This driver supports the on-board graphics built in to the Intel | |
755 | 830M/845G/852GM/855GM/865G chipsets. | |
756 | Say Y if you have and plan to use such a board. | |
757 | ||
758 | To compile this driver as a module, choose M here: the | |
759 | module will be called intelfb. | |
760 | ||
761 | config FB_INTEL_DEBUG | |
762 | bool "Intel driver Debug Messages" | |
763 | depends on FB_INTEL | |
764 | ---help--- | |
765 | Say Y here if you want the Intel driver to output all sorts | |
766 | of debugging informations to provide to the maintainer when | |
767 | something goes wrong. | |
768 | ||
769 | config FB_MATROX | |
770 | tristate "Matrox acceleration" | |
771 | depends on FB && PCI | |
772 | select FB_CFB_FILLRECT | |
773 | select FB_CFB_COPYAREA | |
774 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
775 | select FB_TILEBLITTING |
776 | select FB_MACMODES if PPC_PMAC | |
777 | ---help--- | |
778 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
779 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
780 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
781 | Matrox G400, G450 or G550 card in your box. | |
782 | ||
783 | To compile this driver as a module, choose M here: the | |
784 | module will be called matroxfb. | |
785 | ||
786 | You can pass several parameters to the driver at boot time or at | |
787 | module load time. The parameters look like "video=matrox:XXX", and | |
788 | are described in <file:Documentation/fb/matroxfb.txt>. | |
789 | ||
790 | config FB_MATROX_MILLENIUM | |
791 | bool "Millennium I/II support" | |
792 | depends on FB_MATROX | |
793 | help | |
794 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
795 | video card. If you select "Advanced lowlevel driver options" below, | |
796 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
797 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
798 | also use font widths different from 8. | |
799 | ||
800 | config FB_MATROX_MYSTIQUE | |
801 | bool "Mystique support" | |
802 | depends on FB_MATROX | |
803 | help | |
804 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
805 | video card. If you select "Advanced lowlevel driver options" below, | |
806 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
807 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
808 | different from 8. | |
809 | ||
810 | config FB_MATROX_G | |
811 | bool "G100/G200/G400/G450/G550 support" | |
812 | depends on FB_MATROX | |
813 | ---help--- | |
814 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
815 | video card. If you select "Advanced lowlevel driver options", you | |
816 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
817 | pixel and 32 bpp packed pixel. You can also use font widths | |
818 | different from 8. | |
819 | ||
820 | If you need support for G400 secondary head, you must first say Y to | |
821 | "I2C support" in the character devices section, and then to | |
822 | "Matrox I2C support" and "G400 second head support" here in the | |
823 | framebuffer section. G450/G550 secondary head and digital output | |
824 | are supported without additional modules. | |
825 | ||
826 | The driver starts in monitor mode. You must use the matroxset tool | |
827 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
828 | swap primary and secondary head outputs, or to change output mode. | |
829 | Secondary head driver always start in 640x480 resolution and you | |
830 | must use fbset to change it. | |
831 | ||
832 | Do not forget that second head supports only 16 and 32 bpp | |
833 | packed pixels, so it is a good idea to compile them into the kernel | |
834 | too. You can use only some font widths, as the driver uses generic | |
835 | painting procedures (the secondary head does not use acceleration | |
836 | engine). | |
837 | ||
838 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
839 | and it performs no scaling, so picture must have 525 or 625 lines. | |
840 | ||
841 | config FB_MATROX_I2C | |
842 | tristate "Matrox I2C support" | |
843 | depends on FB_MATROX && I2C | |
844 | select I2C_ALGOBIT | |
845 | ---help--- | |
846 | This drivers creates I2C buses which are needed for accessing the | |
847 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
848 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
849 | G400, and the secondary head DDC bus, present on G400 only. | |
850 | ||
851 | You can say Y or M here if you want to experiment with monitor | |
852 | detection code. You must say Y or M here if you want to use either | |
853 | second head of G400 or MGA-TVO on G200 or G400. | |
854 | ||
855 | If you compile it as module, it will create a module named | |
856 | i2c-matroxfb. | |
857 | ||
858 | config FB_MATROX_MAVEN | |
859 | tristate "G400 second head support" | |
860 | depends on FB_MATROX_G && FB_MATROX_I2C | |
861 | ---help--- | |
862 | WARNING !!! This support does not work with G450 !!! | |
863 | ||
864 | Say Y or M here if you want to use a secondary head (meaning two | |
865 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
866 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
867 | secondary head output is blanked while you are in X. With XFree | |
868 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
869 | the fbdev driver on first head and the fbdev driver on second head. | |
870 | ||
871 | If you compile it as module, two modules are created, | |
872 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
873 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
874 | also load i2c-matroxfb to get it to run. | |
875 | ||
876 | The driver starts in monitor mode and you must use the matroxset | |
877 | tool (available at | |
878 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
879 | PAL or NTSC or to swap primary and secondary head outputs. | |
880 | Secondary head driver also always start in 640x480 resolution, you | |
881 | must use fbset to change it. | |
882 | ||
883 | Also do not forget that second head supports only 16 and 32 bpp | |
884 | packed pixels, so it is a good idea to compile them into the kernel | |
885 | too. You can use only some font widths, as the driver uses generic | |
886 | painting procedures (the secondary head does not use acceleration | |
887 | engine). | |
888 | ||
889 | config FB_MATROX_MULTIHEAD | |
890 | bool "Multihead support" | |
891 | depends on FB_MATROX | |
892 | ---help--- | |
893 | Say Y here if you have more than one (supported) Matrox device in | |
894 | your computer and you want to use all of them for different monitors | |
895 | ("multihead"). If you have only one device, you should say N because | |
896 | the driver compiled with Y is larger and a bit slower, especially on | |
897 | ia32 (ix86). | |
898 | ||
899 | If you said M to "Matrox unified accelerated driver" and N here, you | |
900 | will still be able to use several Matrox devices simultaneously: | |
901 | insert several instances of the module matroxfb into the kernel | |
902 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
903 | for the different Matrox devices. This method is slightly faster but | |
904 | uses 40 KB of kernel memory per Matrox card. | |
905 | ||
906 | There is no need for enabling 'Matrox multihead support' if you have | |
907 | only one Matrox card in the box. | |
908 | ||
1da177e4 LT |
909 | config FB_RADEON |
910 | tristate "ATI Radeon display support" | |
911 | depends on FB && PCI | |
912 | select I2C_ALGOBIT if FB_RADEON_I2C | |
913 | select I2C if FB_RADEON_I2C | |
914 | select FB_MODE_HELPERS | |
915 | select FB_CFB_FILLRECT | |
916 | select FB_CFB_COPYAREA | |
917 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
918 | select FB_MACMODES if PPC_OF |
919 | help | |
920 | Choose this option if you want to use an ATI Radeon graphics card as | |
921 | a framebuffer device. There are both PCI and AGP versions. You | |
922 | don't need to choose this to run the Radeon in plain VGA mode. | |
923 | ||
924 | If you say Y here and want DDC/I2C support you must first say Y to | |
925 | "I2C support" and "I2C bit-banging support" in the character devices | |
926 | section. | |
927 | ||
928 | If you say M here then "I2C support" and "I2C bit-banging support" | |
929 | can be build either as modules or built-in. | |
930 | ||
931 | There is a product page at | |
f510a3c3 | 932 | http://apps.ati.com/ATIcompare/ |
1da177e4 LT |
933 | config FB_RADEON_I2C |
934 | bool "DDC/I2C for ATI Radeon support" | |
935 | depends on FB_RADEON | |
936 | default y | |
937 | help | |
938 | Say Y here if you want DDC/I2C support for your Radeon board. | |
939 | ||
940 | config FB_RADEON_DEBUG | |
941 | bool "Lots of debug output from Radeon driver" | |
942 | depends on FB_RADEON | |
943 | default n | |
944 | help | |
945 | Say Y here if you want the Radeon driver to output all sorts | |
946 | of debugging informations to provide to the maintainer when | |
947 | something goes wrong. | |
948 | ||
949 | config FB_ATY128 | |
950 | tristate "ATI Rage128 display support" | |
951 | depends on FB && PCI | |
952 | select FB_CFB_FILLRECT | |
953 | select FB_CFB_COPYAREA | |
954 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
955 | select FB_MACMODES if PPC_PMAC |
956 | help | |
957 | This driver supports graphics boards with the ATI Rage128 chips. | |
958 | Say Y if you have such a graphics board and read | |
959 | <file:Documentation/fb/aty128fb.txt>. | |
960 | ||
961 | To compile this driver as a module, choose M here: the | |
962 | module will be called aty128fb. | |
963 | ||
964 | config FB_ATY | |
965 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 966 | depends on FB && !SPARC32 |
1da177e4 LT |
967 | select FB_CFB_FILLRECT |
968 | select FB_CFB_COPYAREA | |
969 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
970 | select FB_MACMODES if PPC |
971 | help | |
972 | This driver supports graphics boards with the ATI Mach64 chips. | |
973 | Say Y if you have such a graphics board. | |
974 | ||
975 | To compile this driver as a module, choose M here: the | |
976 | module will be called atyfb. | |
977 | ||
978 | config FB_ATY_CT | |
979 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
980 | depends on PCI && FB_ATY | |
981 | default y if SPARC64 && FB_PCI | |
982 | help | |
983 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
984 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
985 | framebuffer device. The ATI product support page for these boards | |
986 | is at <http://support.ati.com/products/pc/mach64/>. | |
987 | ||
988 | config FB_ATY_GENERIC_LCD | |
989 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
990 | depends on FB_ATY_CT | |
991 | help | |
992 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
993 | Rage XC, or Rage XL chipset. | |
994 | ||
1da177e4 LT |
995 | config FB_ATY_GX |
996 | bool "Mach64 GX support" if PCI | |
997 | depends on FB_ATY | |
998 | default y if ATARI | |
999 | help | |
1000 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1001 | board (or other boards based on the Mach64 GX chipset) as a | |
1002 | framebuffer device. The ATI product support page for these boards | |
1003 | is at | |
1004 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1005 | ||
e65c0850 RD |
1006 | config FB_S3TRIO |
1007 | bool "S3 Trio display support" | |
1008 | depends on (FB = y) && PPC && BROKEN | |
1009 | help | |
1010 | If you have a S3 Trio say Y. Say N for S3 Virge. | |
1011 | ||
1da177e4 LT |
1012 | config FB_SAVAGE |
1013 | tristate "S3 Savage support" | |
1014 | depends on FB && PCI && EXPERIMENTAL | |
1015 | select I2C_ALGOBIT if FB_SAVAGE_I2C | |
1016 | select I2C if FB_SAVAGE_I2C | |
1017 | select FB_MODE_HELPERS | |
1018 | select FB_CFB_FILLRECT | |
1019 | select FB_CFB_COPYAREA | |
1020 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1021 | help |
1022 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1023 | chips. | |
1024 | ||
1025 | Say Y if you have such a graphics card. | |
1026 | ||
1027 | To compile this driver as a module, choose M here; the module | |
1028 | will be called savagefb. | |
1029 | ||
1030 | config FB_SAVAGE_I2C | |
1031 | bool "Enable DDC2 Support" | |
1032 | depends on FB_SAVAGE | |
1033 | help | |
1034 | This enables I2C support for S3 Savage Chipsets. This is used | |
1035 | only for getting EDID information from the attached display | |
1036 | allowing for robust video mode handling and switching. | |
1037 | ||
1038 | Because fbdev-2.6 requires that drivers must be able to | |
1039 | independently validate video mode parameters, you should say Y | |
1040 | here. | |
1041 | ||
1042 | config FB_SAVAGE_ACCEL | |
1043 | bool "Enable Console Acceleration" | |
1044 | depends on FB_SAVAGE | |
1045 | default n | |
1046 | help | |
1047 | This option will compile in console acceleration support. If | |
1048 | the resulting framebuffer console has bothersome glitches, then | |
1049 | choose N here. | |
1050 | ||
1051 | config FB_SIS | |
544393fe | 1052 | tristate "SiS/XGI display support" |
1da177e4 LT |
1053 | depends on FB && PCI |
1054 | select FB_CFB_FILLRECT | |
1055 | select FB_CFB_COPYAREA | |
1056 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1057 | help |
544393fe TW |
1058 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1059 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1060 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1061 | |
1062 | To compile this driver as a module, choose M here; the module | |
1063 | will be called sisfb. | |
1064 | ||
1065 | config FB_SIS_300 | |
1066 | bool "SiS 300 series support" | |
1067 | depends on FB_SIS | |
1068 | help | |
1069 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1070 | ||
1071 | config FB_SIS_315 | |
544393fe | 1072 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1073 | depends on FB_SIS |
1074 | help | |
544393fe TW |
1075 | Say Y here to support use of the SiS 315, 330 and 340 series |
1076 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1077 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1078 | |
1079 | config FB_NEOMAGIC | |
1080 | tristate "NeoMagic display support" | |
1081 | depends on FB && PCI | |
1082 | select FB_MODE_HELPERS | |
1083 | select FB_CFB_FILLRECT | |
1084 | select FB_CFB_COPYAREA | |
1085 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1086 | help |
1087 | This driver supports notebooks with NeoMagic PCI chips. | |
1088 | Say Y if you have such a graphics card. | |
1089 | ||
1090 | To compile this driver as a module, choose M here: the | |
1091 | module will be called neofb. | |
1092 | ||
1093 | config FB_KYRO | |
1094 | tristate "IMG Kyro support" | |
1095 | depends on FB && PCI | |
1096 | select FB_CFB_FILLRECT | |
1097 | select FB_CFB_COPYAREA | |
1098 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1099 | help |
1100 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1101 | graphics board. | |
1102 | ||
1103 | To compile this driver as a module, choose M here: the | |
1104 | module will be called kyrofb. | |
1105 | ||
1106 | config FB_3DFX | |
1107 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1108 | depends on FB && PCI | |
1109 | select FB_CFB_IMAGEBLIT | |
1110 | select FB_CFB_FILLRECT | |
1111 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1112 | help |
1113 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1114 | chips. Say Y if you have such a graphics board. | |
1115 | ||
1116 | To compile this driver as a module, choose M here: the | |
1117 | module will be called tdfxfb. | |
1118 | ||
1119 | config FB_3DFX_ACCEL | |
1120 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1121 | depends on FB_3DFX && EXPERIMENTAL | |
1122 | ---help--- | |
1123 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1124 | with acceleration functions. | |
1125 | ||
1126 | ||
1127 | config FB_VOODOO1 | |
1128 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1129 | depends on FB && PCI | |
1130 | select FB_CFB_FILLRECT | |
1131 | select FB_CFB_COPYAREA | |
1132 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1133 | ---help--- |
1134 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1135 | Voodoo2 (cvg) based graphics card. | |
1136 | ||
1137 | To compile this driver as a module, choose M here: the | |
1138 | module will be called sstfb. | |
1139 | ||
1140 | WARNING: Do not use any application that uses the 3D engine | |
1141 | (namely glide) while using this driver. | |
1142 | Please read the <file:Documentation/fb/README-sstfb.txt> for supported | |
1143 | options and other important info support. | |
1144 | ||
9fa68eae KP |
1145 | config FB_CYBLA |
1146 | tristate "Cyberblade/i1 support" | |
44637a12 | 1147 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1148 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1149 | select VIDEO_SELECT |
1150 | ---help--- | |
1151 | This driver is supposed to support the Trident Cyberblade/i1 | |
1152 | graphics core integrated in the VIA VT8601A North Bridge, | |
1153 | also known as VIA Apollo PLE133. | |
1154 | ||
1155 | Status: | |
1156 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1157 | - Does work reliable on all systems with CRT/LCD connected to | |
1158 | normal VGA ports. | |
1159 | - Should work on systems that do use the internal LCD port, but | |
1160 | this is absolutely not tested. | |
1161 | ||
1162 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1163 | ypan scrolling is used by default. | |
1164 | ||
1165 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1166 | ||
1167 | To compile this driver as a module, choose M here: the | |
1168 | module will be called cyblafb. | |
1169 | ||
1da177e4 LT |
1170 | config FB_TRIDENT |
1171 | tristate "Trident support" | |
1172 | depends on FB && PCI | |
1173 | select FB_CFB_FILLRECT | |
1174 | select FB_CFB_COPYAREA | |
1175 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1176 | ---help--- |
1177 | This driver is supposed to support graphics boards with the | |
1178 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1179 | but also on some motherboards. For more information, read | |
1180 | <file:Documentation/fb/tridentfb.txt> | |
1181 | ||
9fa68eae KP |
1182 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1183 | instead. | |
1184 | ||
1da177e4 LT |
1185 | Say Y if you have such a graphics board. |
1186 | ||
9fa68eae | 1187 | |
1da177e4 LT |
1188 | To compile this driver as a module, choose M here: the |
1189 | module will be called tridentfb. | |
1190 | ||
1191 | config FB_TRIDENT_ACCEL | |
1192 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1193 | depends on FB_TRIDENT && EXPERIMENTAL | |
1194 | ---help--- | |
1195 | This will compile the Trident frame buffer device with | |
1196 | acceleration functions. | |
1197 | ||
1da177e4 LT |
1198 | config FB_PM3 |
1199 | tristate "Permedia3 support" | |
1200 | depends on FB && PCI && BROKEN | |
1201 | help | |
1202 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1203 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1204 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1205 | and maybe other boards. | |
1206 | ||
1da177e4 LT |
1207 | config FB_AU1100 |
1208 | bool "Au1100 LCD Driver" | |
1209 | depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y | |
1210 | ||
f95ec3c6 RB |
1211 | config FB_AU1200 |
1212 | bool "Au1200 LCD Driver" | |
1213 | depends on FB && MIPS && SOC_AU1200 | |
1214 | select FB_CFB_FILLRECT | |
1215 | select FB_CFB_COPYAREA | |
1216 | select FB_CFB_IMAGEBLIT | |
1217 | help | |
1218 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1219 | various panels and CRTs by passing in kernel cmd line option | |
1220 | au1200fb:panel=<name>. | |
1221 | ||
1da177e4 LT |
1222 | source "drivers/video/geode/Kconfig" |
1223 | ||
1da177e4 LT |
1224 | config FB_FFB |
1225 | bool "Creator/Creator3D/Elite3D support" | |
1226 | depends on FB_SBUS && SPARC64 | |
1227 | select FB_CFB_COPYAREA | |
1228 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1229 | help |
1230 | This is the frame buffer device driver for the Creator, Creator3D, | |
1231 | and Elite3D graphics boards. | |
1232 | ||
1233 | config FB_TCX | |
1234 | bool "TCX (SS4/SS5 only) support" | |
1235 | depends on FB_SBUS | |
1236 | select FB_CFB_FILLRECT | |
1237 | select FB_CFB_COPYAREA | |
1238 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1239 | help |
1240 | This is the frame buffer device driver for the TCX 24/8bit frame | |
1241 | buffer. | |
1242 | ||
1243 | config FB_CG14 | |
1244 | bool "CGfourteen (SX) support" | |
1245 | depends on FB_SBUS | |
1246 | select FB_CFB_FILLRECT | |
1247 | select FB_CFB_COPYAREA | |
1248 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1249 | help |
1250 | This is the frame buffer device driver for the CGfourteen frame | |
1251 | buffer on Desktop SPARCsystems with the SX graphics option. | |
1252 | ||
1253 | config FB_P9100 | |
1254 | bool "P9100 (Sparcbook 3 only) support" | |
1255 | depends on FB_SBUS | |
1256 | select FB_CFB_FILLRECT | |
1257 | select FB_CFB_COPYAREA | |
1258 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1259 | help |
1260 | This is the frame buffer device driver for the P9100 card | |
1261 | supported on Sparcbook 3 machines. | |
1262 | ||
1263 | config FB_LEO | |
1264 | bool "Leo (ZX) support" | |
1265 | depends on FB_SBUS | |
1266 | select FB_CFB_FILLRECT | |
1267 | select FB_CFB_COPYAREA | |
1268 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1269 | help |
1270 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
1271 | (leo) frame buffer cards. | |
1272 | ||
1273 | config FB_PCI | |
1274 | bool "PCI framebuffers" | |
0b57ee9e | 1275 | depends on (FB = y) && PCI && SPARC |
1da177e4 LT |
1276 | |
1277 | config FB_IGA | |
1278 | bool "IGA 168x display support" | |
1279 | depends on SPARC32 && FB_PCI | |
1280 | select FB_CFB_FILLRECT | |
1281 | select FB_CFB_COPYAREA | |
1282 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1283 | help |
1284 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
1285 | successor frame buffer cards. | |
1286 | ||
1287 | config FB_HIT | |
1288 | tristate "HD64461 Frame Buffer support" | |
1289 | depends on FB && HD64461 | |
1290 | select FB_CFB_FILLRECT | |
1291 | select FB_CFB_COPYAREA | |
1292 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1293 | help |
1294 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1295 | frame buffer card. | |
1296 | ||
1297 | config FB_PMAG_AA | |
1298 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1299 | depends on (FB = y) && TC |
1da177e4 LT |
1300 | select FB_CFB_FILLRECT |
1301 | select FB_CFB_COPYAREA | |
1302 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1303 | help |
1304 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1305 | used mainly in the MIPS-based DECstation series. | |
1306 | ||
1307 | config FB_PMAG_BA | |
1308 | bool "PMAG-BA TURBOchannel framebuffer support" | |
a9350003 | 1309 | depends on (FB = y) && TC |
1da177e4 LT |
1310 | select FB_CFB_FILLRECT |
1311 | select FB_CFB_COPYAREA | |
1312 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1313 | help |
1314 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1315 | used mainly in the MIPS-based DECstation series. | |
1316 | ||
1317 | config FB_PMAGB_B | |
1318 | bool "PMAGB-B TURBOchannel framebuffer support" | |
a9350003 | 1319 | depends on (FB = y) && TC |
1da177e4 LT |
1320 | select FB_CFB_FILLRECT |
1321 | select FB_CFB_COPYAREA | |
1322 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1323 | help |
1324 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1325 | in the MIPS-based DECstation series. The card is currently only | |
1326 | supported in 1280x1024x8 mode. | |
1327 | ||
1328 | config FB_MAXINE | |
1329 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1330 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1331 | select FB_CFB_FILLRECT |
1332 | select FB_CFB_COPYAREA | |
1333 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1334 | help |
1335 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1336 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1337 | Codename "Maxine"). | |
1338 | ||
1339 | config FB_TX3912 | |
1340 | bool "TMPTX3912/PR31700 frame buffer support" | |
1341 | depends on (FB = y) && NINO | |
1342 | select FB_CFB_FILLRECT | |
1343 | select FB_CFB_COPYAREA | |
1344 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1345 | help |
1346 | The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core | |
1347 | see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. | |
1348 | ||
1349 | Say Y here to enable kernel support for the on-board framebuffer. | |
1350 | ||
1351 | config FB_G364 | |
b38817dd YY |
1352 | bool "G364 frame buffer support" |
1353 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1354 | select FB_CFB_FILLRECT |
1355 | select FB_CFB_COPYAREA | |
1356 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1357 | help |
1358 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1359 | Olivetti M700-10 systems. | |
1360 | ||
1361 | config FB_68328 | |
1362 | bool "Motorola 68328 native frame buffer support" | |
1363 | depends on FB && (M68328 || M68EZ328 || M68VZ328) | |
1364 | select FB_CFB_FILLRECT | |
1365 | select FB_CFB_COPYAREA | |
1366 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1367 | help |
1368 | Say Y here if you want to support the built-in frame buffer of | |
1369 | the Motorola 68328 CPU family. | |
1370 | ||
1371 | config FB_PXA | |
1372 | tristate "PXA LCD framebuffer support" | |
1373 | depends on FB && ARCH_PXA | |
1374 | select FB_CFB_FILLRECT | |
1375 | select FB_CFB_COPYAREA | |
1376 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1377 | ---help--- |
1378 | Frame buffer driver for the built-in LCD controller in the Intel | |
1379 | PXA2x0 processor. | |
1380 | ||
1381 | This driver is also available as a module ( = code which can be | |
1382 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1383 | module will be called pxafb. If you want to compile it as a module, |
1da177e4 LT |
1384 | say M here and read <file:Documentation/modules.txt>. |
1385 | ||
1386 | If unsure, say N. | |
1387 | ||
1da177e4 LT |
1388 | config FB_PXA_PARAMETERS |
1389 | bool "PXA LCD command line parameters" | |
1390 | default n | |
1391 | depends on FB_PXA | |
1392 | ---help--- | |
1393 | Enable the use of kernel command line or module parameters | |
1394 | to configure the physical properties of the LCD panel when | |
1395 | using the PXA LCD driver. | |
1396 | ||
1397 | This option allows you to override the panel parameters | |
1398 | supplied by the platform in order to support multiple | |
1399 | different models of flatpanel. If you will only be using a | |
1400 | single model of flatpanel then you can safely leave this | |
1401 | option disabled. | |
1402 | ||
1403 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1404 | ||
ecc41d5e RD |
1405 | config FB_W100 |
1406 | tristate "W100 frame buffer support" | |
1407 | depends on FB && PXA_SHARPSL | |
1408 | select FB_CFB_FILLRECT | |
1409 | select FB_CFB_COPYAREA | |
1410 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1411 | ---help--- |
1412 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1413 | ||
1414 | This driver is also available as a module ( = code which can be | |
1415 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1416 | module will be called w100fb. If you want to compile it as a module, |
ecc41d5e RD |
1417 | say M here and read <file:Documentation/modules.txt>. |
1418 | ||
1419 | If unsure, say N. | |
1da177e4 | 1420 | |
20fd5767 AP |
1421 | config FB_S3C2410 |
1422 | tristate "S3C2410 LCD framebuffer support" | |
1423 | depends on FB && ARCH_S3C2410 | |
1424 | select FB_CFB_FILLRECT | |
1425 | select FB_CFB_COPYAREA | |
1426 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1427 | ---help--- |
1428 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1429 | S3C2410 processor. | |
1430 | ||
1431 | This driver is also available as a module ( = code which can be | |
1432 | inserted and removed from the running kernel whenever you want). The | |
1433 | module will be called s3c2410fb. If you want to compile it as a module, | |
1434 | say M here and read <file:Documentation/modules.txt>. | |
1435 | ||
1436 | If unsure, say N. | |
1437 | config FB_S3C2410_DEBUG | |
1438 | bool "S3C2410 lcd debug messages" | |
1439 | depends on FB_S3C2410 | |
1440 | help | |
1441 | Turn on debugging messages. Note that you can set/unset at run time | |
1442 | through sysfs | |
1443 | ||
1da177e4 LT |
1444 | config FB_VIRTUAL |
1445 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1446 | depends on FB | |
1447 | select FB_CFB_FILLRECT | |
1448 | select FB_CFB_COPYAREA | |
1449 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1450 | ---help--- |
1451 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1452 | unswappable kernel memory instead of on the memory of a graphics | |
1453 | board. This means you cannot see any output sent to this frame | |
1454 | buffer device, while it does consume precious memory. The main use | |
1455 | of this frame buffer device is testing and debugging the frame | |
1456 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1457 | the innocent, it has to be enabled explicitly at boot time using the | |
1458 | kernel option `video=vfb:'. | |
1459 | ||
1460 | To compile this driver as a module, choose M here: the | |
1461 | module will be called vfb. | |
1462 | ||
1463 | If unsure, say N. | |
1464 | if VT | |
1465 | source "drivers/video/console/Kconfig" | |
1466 | endif | |
1467 | ||
1468 | if FB || SGI_NEWPORT_CONSOLE | |
1469 | source "drivers/video/logo/Kconfig" | |
1470 | endif | |
1471 | ||
1472 | if FB && SYSFS | |
1473 | source "drivers/video/backlight/Kconfig" | |
1474 | endif | |
1475 | ||
1476 | endmenu | |
1477 |