[net-next-2.6.git] / drivers / usb / otg / Kconfig

#
# USB OTG infrastructure may be needed for peripheral-only, host-only,
# or OTG-capable configurations when OTG transceivers or controllers
# are used.
#

comment "OTG and related infrastructure"

config USB_OTG_UTILS
	bool
	help
	  Select this to make sure the build includes objects from
	  the OTG infrastructure directory.

if USB || USB_GADGET

#
# USB Transceiver Drivers
#
config USB_GPIO_VBUS
	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
	depends on GENERIC_GPIO
	select USB_OTG_UTILS
	help
	  Provides simple GPIO VBUS sensing for controllers with an
	  internal transceiver via the otg_transceiver interface, and
	  optionally control of a D+ pullup GPIO as well as a VBUS
	  current limit regulator.

config ISP1301_OMAP
	tristate "Philips ISP1301 with OMAP OTG"
	depends on I2C && ARCH_OMAP_OTG
	select USB_OTG_UTILS
	help
	  If you say yes here you get support for the Philips ISP1301
	  USB-On-The-Go transceiver working with the OMAP OTG controller.
	  The ISP1301 is a full speed USB  transceiver which is used in
	  products including H2, H3, and H4 development boards for Texas
	  Instruments OMAP processors.

	  This driver can also be built as a module.  If so, the module
	  will be called isp1301_omap.

config TWL4030_USB
	tristate "TWL4030 USB Transceiver Driver"
	depends on TWL4030_CORE
	select USB_OTG_UTILS
	help
	  Enable this to support the USB OTG transceiver on TWL4030
	  family chips (including the TWL5030 and TPS659x0 devices).
	  This transceiver supports high and full speed devices plus,
	  in host mode, low speed.

endif # USB || OTG
Commit	Line	Data
b8da8677 DB	1	#
	2	# USB OTG infrastructure may be needed for peripheral-only, host-only,
	3	# or OTG-capable configurations when OTG transceivers or controllers
	4	# are used.
	5	#
	6
	7	comment "OTG and related infrastructure"
	8
b8da8677 DB	9	config USB_OTG_UTILS
	10	bool
	11	help
	12	Select this to make sure the build includes objects from
	13	the OTG infrastructure directory.
	14
2bf5fa13 DB	15	if USB \|\| USB_GADGET
2bf5fa13 DB	16
6084f1bf PZ	17	#
	18	# USB Transceiver Drivers
	19	#
	20	config USB_GPIO_VBUS
	21	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
	22	depends on GENERIC_GPIO
	23	select USB_OTG_UTILS
	24	help
	25	Provides simple GPIO VBUS sensing for controllers with an
	26	internal transceiver via the otg_transceiver interface, and
	27	optionally control of a D+ pullup GPIO as well as a VBUS
	28	current limit regulator.
	29
b8da8677 DB	30	config ISP1301_OMAP
	31	tristate "Philips ISP1301 with OMAP OTG"
	32	depends on I2C && ARCH_OMAP_OTG
	33	select USB_OTG_UTILS
	34	help
	35	If you say yes here you get support for the Philips ISP1301
	36	USB-On-The-Go transceiver working with the OMAP OTG controller.
	37	The ISP1301 is a full speed USB transceiver which is used in
	38	products including H2, H3, and H4 development boards for Texas
	39	Instruments OMAP processors.
	40
	41	This driver can also be built as a module. If so, the module
	42	will be called isp1301_omap.
	43
9ebd9616 DB	44	config TWL4030_USB
	45	tristate "TWL4030 USB Transceiver Driver"
	46	depends on TWL4030_CORE
	47	select USB_OTG_UTILS
	48	help
	49	Enable this to support the USB OTG transceiver on TWL4030
	50	family chips (including the TWL5030 and TPS659x0 devices).
	51	This transceiver supports high and full speed devices plus,
	52	in host mode, low speed.
	53
b8da8677	54	endif # USB \|\| OTG