[net-next-2.6.git] / drivers / spi / Makefile

#
# Makefile for kernel SPI drivers.
#

ifeq ($(CONFIG_SPI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif

# small core, mostly translating board-specific
# config declarations into driver model code
obj-$(CONFIG_SPI_MASTER)		+= spi.o

# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
# 	... add above this line ...

# SPI protocol drivers (device/link on bus)
obj-$(CONFIG_SPI_AT25)		+= at25.o
obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
# 	... add above this line ...

# SPI slave controller drivers (upstream link)
# 	... add above this line ...

# SPI slave drivers (protocol for that link)
# 	... add above this line ...
Commit	Line	Data
8ae12a0d DB	1	#
	2	# Makefile for kernel SPI drivers.
	3	#
	4
	5	ifeq ($(CONFIG_SPI_DEBUG),y)
	6	EXTRA_CFLAGS += -DDEBUG
	7	endif
	8
	9	# small core, mostly translating board-specific
	10	# config declarations into driver model code
	11	obj-$(CONFIG_SPI_MASTER) += spi.o
	12
	13	# SPI master controller drivers (bus)
754ce4f2	14	obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
a5f6abd4 WB	15	obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
a5f6abd4 WB	16	obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
7111763d	17	obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
69c202af	18	obj-$(CONFIG_SPI_IMX) += spi_imx.o
e0c9905e	19	obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
fdb3c18d	20	obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
ccf06998	21	obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
1fc7547d	22	obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
7fba5340	23	obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
8ae12a0d DB	24	# ... add above this line ...
	25
	26	# SPI protocol drivers (device/link on bus)
b587b13a	27	obj-$(CONFIG_SPI_AT25) += at25.o
814a8d50	28	obj-$(CONFIG_SPI_SPIDEV) += spidev.o
8ae12a0d DB	29	# ... add above this line ...
	30
	31	# SPI slave controller drivers (upstream link)
	32	# ... add above this line ...
	33
	34	# SPI slave drivers (protocol for that link)
	35	# ... add above this line ...