[net-next-2.6.git] / drivers / serial / pmac_zilog.h

#ifndef __PMAC_ZILOG_H__
#define __PMAC_ZILOG_H__

#ifdef CONFIG_PPC_PMAC
#define pmz_debug(fmt, arg...)	dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
#define pmz_error(fmt, arg...)	dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
#define pmz_info(fmt, arg...)	dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
#else
#define pmz_debug(fmt, arg...)	dev_dbg(&uap->node->dev, fmt, ## arg)
#define pmz_error(fmt, arg...)	dev_err(&uap->node->dev, fmt, ## arg)
#define pmz_info(fmt, arg...)	dev_info(&uap->node->dev, fmt, ## arg)
#endif

/*
 * At most 2 ESCCs with 2 ports each
 */
#define MAX_ZS_PORTS	4

/* 
 * We wrap our port structure around the generic uart_port.
 */
#define NUM_ZSREGS    17

struct uart_pmac_port {
	struct uart_port		port;
	struct uart_pmac_port		*mate;

#ifdef CONFIG_PPC_PMAC
	/* macio_dev for the escc holding this port (maybe be null on
	 * early inited port)
	 */
	struct macio_dev		*dev;
	/* device node to this port, this points to one of 2 childs
	 * of "escc" node (ie. ch-a or ch-b)
	 */
	struct device_node		*node;
#else
	struct platform_device		*node;
#endif

	/* Port type as obtained from device tree (IRDA, modem, ...) */
	int				port_type;
	u8				curregs[NUM_ZSREGS];

	unsigned int			flags;
#define PMACZILOG_FLAG_IS_CONS		0x00000001
#define PMACZILOG_FLAG_IS_KGDB		0x00000002
#define PMACZILOG_FLAG_MODEM_STATUS	0x00000004
#define PMACZILOG_FLAG_IS_CHANNEL_A	0x00000008
#define PMACZILOG_FLAG_REGS_HELD	0x00000010
#define PMACZILOG_FLAG_TX_STOPPED	0x00000020
#define PMACZILOG_FLAG_TX_ACTIVE	0x00000040
#define PMACZILOG_FLAG_ENABLED          0x00000080
#define PMACZILOG_FLAG_IS_IRDA		0x00000100
#define PMACZILOG_FLAG_IS_INTMODEM	0x00000200
#define PMACZILOG_FLAG_HAS_DMA		0x00000400
#define PMACZILOG_FLAG_RSRC_REQUESTED	0x00000800
#define PMACZILOG_FLAG_IS_ASLEEP	0x00001000
#define PMACZILOG_FLAG_IS_OPEN		0x00002000
#define PMACZILOG_FLAG_IS_IRQ_ON	0x00004000
#define PMACZILOG_FLAG_IS_EXTCLK	0x00008000
#define PMACZILOG_FLAG_BREAK		0x00010000

	unsigned char			parity_mask;
	unsigned char			prev_status;

	volatile u8			__iomem *control_reg;
	volatile u8			__iomem *data_reg;

#ifdef CONFIG_PPC_PMAC
	unsigned int			tx_dma_irq;
	unsigned int			rx_dma_irq;
	volatile struct dbdma_regs	__iomem *tx_dma_regs;
	volatile struct dbdma_regs	__iomem *rx_dma_regs;
#endif

	struct ktermios			termios_cache;
};

#define to_pmz(p) ((struct uart_pmac_port *)(p))

static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap)
{
	if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
		return uap;
	return uap->mate;
}

/*
 * Register accessors. Note that we don't need to enforce a recovery
 * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
 * though if we try to use this driver on older machines, we might have
 * to add it back
 */
static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg)
{
	if (reg != 0)
		writeb(reg, port->control_reg);
	return readb(port->control_reg);
}

static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value)
{
	if (reg != 0)
		writeb(reg, port->control_reg);
	writeb(value, port->control_reg);
}

static inline u8 read_zsdata(struct uart_pmac_port *port)
{
	return readb(port->data_reg);
}

static inline void write_zsdata(struct uart_pmac_port *port, u8 data)
{
	writeb(data, port->data_reg);
}

static inline void zssync(struct uart_pmac_port *port)
{
	(void)readb(port->control_reg);
}

/* Conversion routines to/from brg time constants from/to bits
 * per second.
 */
#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)

#define ZS_CLOCK         3686400	/* Z8530 RTxC input clock rate */

/* The Zilog register set */

#define	FLAG	0x7e

/* Write Register 0 */
#define	R0	0		/* Register selects */
#define	R1	1
#define	R2	2
#define	R3	3
#define	R4	4
#define	R5	5
#define	R6	6
#define	R7	7
#define	R8	8
#define	R9	9
#define	R10	10
#define	R11	11
#define	R12	12
#define	R13	13
#define	R14	14
#define	R15	15
#define	R7P	16

#define	NULLCODE	0	/* Null Code */
#define	POINT_HIGH	0x8	/* Select upper half of registers */
#define	RES_EXT_INT	0x10	/* Reset Ext. Status Interrupts */
#define	SEND_ABORT	0x18	/* HDLC Abort */
#define	RES_RxINT_FC	0x20	/* Reset RxINT on First Character */
#define	RES_Tx_P	0x28	/* Reset TxINT Pending */
#define	ERR_RES		0x30	/* Error Reset */
#define	RES_H_IUS	0x38	/* Reset highest IUS */

#define	RES_Rx_CRC	0x40	/* Reset Rx CRC Checker */
#define	RES_Tx_CRC	0x80	/* Reset Tx CRC Checker */
#define	RES_EOM_L	0xC0	/* Reset EOM latch */

/* Write Register 1 */

#define	EXT_INT_ENAB	0x1	/* Ext Int Enable */
#define	TxINT_ENAB	0x2	/* Tx Int Enable */
#define	PAR_SPEC	0x4	/* Parity is special condition */

#define	RxINT_DISAB	0	/* Rx Int Disable */
#define	RxINT_FCERR	0x8	/* Rx Int on First Character Only or Error */
#define	INT_ALL_Rx	0x10	/* Int on all Rx Characters or error */
#define	INT_ERR_Rx	0x18	/* Int on error only */
#define RxINT_MASK	0x18

#define	WT_RDY_RT	0x20	/* W/Req reflects recv if 1, xmit if 0 */
#define	WT_FN_RDYFN	0x40	/* W/Req pin is DMA request if 1, wait if 0 */
#define	WT_RDY_ENAB	0x80	/* Enable W/Req pin */

/* Write Register #2 (Interrupt Vector) */

/* Write Register 3 */

#define	RxENABLE	0x1	/* Rx Enable */
#define	SYNC_L_INH	0x2	/* Sync Character Load Inhibit */
#define	ADD_SM		0x4	/* Address Search Mode (SDLC) */
#define	RxCRC_ENAB	0x8	/* Rx CRC Enable */
#define	ENT_HM		0x10	/* Enter Hunt Mode */
#define	AUTO_ENAB	0x20	/* Auto Enables */
#define	Rx5		0x0	/* Rx 5 Bits/Character */
#define	Rx7		0x40	/* Rx 7 Bits/Character */
#define	Rx6		0x80	/* Rx 6 Bits/Character */
#define	Rx8		0xc0	/* Rx 8 Bits/Character */
#define RxN_MASK	0xc0

/* Write Register 4 */

#define	PAR_ENAB	0x1	/* Parity Enable */
#define	PAR_EVEN	0x2	/* Parity Even/Odd* */

#define	SYNC_ENAB	0	/* Sync Modes Enable */
#define	SB1		0x4	/* 1 stop bit/char */
#define	SB15		0x8	/* 1.5 stop bits/char */
#define	SB2		0xc	/* 2 stop bits/char */
#define SB_MASK		0xc

#define	MONSYNC		0	/* 8 Bit Sync character */
#define	BISYNC		0x10	/* 16 bit sync character */
#define	SDLC		0x20	/* SDLC Mode (01111110 Sync Flag) */
#define	EXTSYNC		0x30	/* External Sync Mode */

#define	X1CLK		0x0	/* x1 clock mode */
#define	X16CLK		0x40	/* x16 clock mode */
#define	X32CLK		0x80	/* x32 clock mode */
#define	X64CLK		0xC0	/* x64 clock mode */
#define XCLK_MASK	0xC0

/* Write Register 5 */

#define	TxCRC_ENAB	0x1	/* Tx CRC Enable */
#define	RTS		0x2	/* RTS */
#define	SDLC_CRC	0x4	/* SDLC/CRC-16 */
#define	TxENABLE	0x8	/* Tx Enable */
#define	SND_BRK		0x10	/* Send Break */
#define	Tx5		0x0	/* Tx 5 bits (or less)/character */
#define	Tx7		0x20	/* Tx 7 bits/character */
#define	Tx6		0x40	/* Tx 6 bits/character */
#define	Tx8		0x60	/* Tx 8 bits/character */
#define TxN_MASK	0x60
#define	DTR		0x80	/* DTR */

/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */

/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */

/* Write Register 7' (Some enhanced feature control) */
#define	ENEXREAD	0x40	/* Enable read of some write registers */

/* Write Register 8 (transmit buffer) */

/* Write Register 9 (Master interrupt control) */
#define	VIS	1	/* Vector Includes Status */
#define	NV	2	/* No Vector */
#define	DLC	4	/* Disable Lower Chain */
#define	MIE	8	/* Master Interrupt Enable */
#define	STATHI	0x10	/* Status high */
#define	NORESET	0	/* No reset on write to R9 */
#define	CHRB	0x40	/* Reset channel B */
#define	CHRA	0x80	/* Reset channel A */
#define	FHWRES	0xc0	/* Force hardware reset */

/* Write Register 10 (misc control bits) */
#define	BIT6	1	/* 6 bit/8bit sync */
#define	LOOPMODE 2	/* SDLC Loop mode */
#define	ABUNDER	4	/* Abort/flag on SDLC xmit underrun */
#define	MARKIDLE 8	/* Mark/flag on idle */
#define	GAOP	0x10	/* Go active on poll */
#define	NRZ	0	/* NRZ mode */
#define	NRZI	0x20	/* NRZI mode */
#define	FM1	0x40	/* FM1 (transition = 1) */
#define	FM0	0x60	/* FM0 (transition = 0) */
#define	CRCPS	0x80	/* CRC Preset I/O */

/* Write Register 11 (Clock Mode control) */
#define	TRxCXT	0	/* TRxC = Xtal output */
#define	TRxCTC	1	/* TRxC = Transmit clock */
#define	TRxCBR	2	/* TRxC = BR Generator Output */
#define	TRxCDP	3	/* TRxC = DPLL output */
#define	TRxCOI	4	/* TRxC O/I */
#define	TCRTxCP	0	/* Transmit clock = RTxC pin */
#define	TCTRxCP	8	/* Transmit clock = TRxC pin */
#define	TCBR	0x10	/* Transmit clock = BR Generator output */
#define	TCDPLL	0x18	/* Transmit clock = DPLL output */
#define	RCRTxCP	0	/* Receive clock = RTxC pin */
#define	RCTRxCP	0x20	/* Receive clock = TRxC pin */
#define	RCBR	0x40	/* Receive clock = BR Generator output */
#define	RCDPLL	0x60	/* Receive clock = DPLL output */
#define	RTxCX	0x80	/* RTxC Xtal/No Xtal */

/* Write Register 12 (lower byte of baud rate generator time constant) */

/* Write Register 13 (upper byte of baud rate generator time constant) */

/* Write Register 14 (Misc control bits) */
#define	BRENAB	1	/* Baud rate generator enable */
#define	BRSRC	2	/* Baud rate generator source */
#define	DTRREQ	4	/* DTR/Request function */
#define	AUTOECHO 8	/* Auto Echo */
#define	LOOPBAK	0x10	/* Local loopback */
#define	SEARCH	0x20	/* Enter search mode */
#define	RMC	0x40	/* Reset missing clock */
#define	DISDPLL	0x60	/* Disable DPLL */
#define	SSBR	0x80	/* Set DPLL source = BR generator */
#define	SSRTxC	0xa0	/* Set DPLL source = RTxC */
#define	SFMM	0xc0	/* Set FM mode */
#define	SNRZI	0xe0	/* Set NRZI mode */

/* Write Register 15 (external/status interrupt control) */
#define	EN85C30	1	/* Enable some 85c30-enhanced registers */
#define	ZCIE	2	/* Zero count IE */
#define	ENSTFIFO 4	/* Enable status FIFO (SDLC) */
#define	DCDIE	8	/* DCD IE */
#define	SYNCIE	0x10	/* Sync/hunt IE */
#define	CTSIE	0x20	/* CTS IE */
#define	TxUIE	0x40	/* Tx Underrun/EOM IE */
#define	BRKIE	0x80	/* Break/Abort IE */


/* Read Register 0 */
#define	Rx_CH_AV	0x1	/* Rx Character Available */
#define	ZCOUNT		0x2	/* Zero count */
#define	Tx_BUF_EMP	0x4	/* Tx Buffer empty */
#define	DCD		0x8	/* DCD */
#define	SYNC_HUNT	0x10	/* Sync/hunt */
#define	CTS		0x20	/* CTS */
#define	TxEOM		0x40	/* Tx underrun */
#define	BRK_ABRT	0x80	/* Break/Abort */

/* Read Register 1 */
#define	ALL_SNT		0x1	/* All sent */
/* Residue Data for 8 Rx bits/char programmed */
#define	RES3		0x8	/* 0/3 */
#define	RES4		0x4	/* 0/4 */
#define	RES5		0xc	/* 0/5 */
#define	RES6		0x2	/* 0/6 */
#define	RES7		0xa	/* 0/7 */
#define	RES8		0x6	/* 0/8 */
#define	RES18		0xe	/* 1/8 */
#define	RES28		0x0	/* 2/8 */
/* Special Rx Condition Interrupts */
#define	PAR_ERR		0x10	/* Parity error */
#define	Rx_OVR		0x20	/* Rx Overrun Error */
#define	CRC_ERR		0x40	/* CRC/Framing Error */
#define	END_FR		0x80	/* End of Frame (SDLC) */

/* Read Register 2 (channel b only) - Interrupt vector */
#define	CHB_Tx_EMPTY	0x00
#define	CHB_EXT_STAT	0x02
#define	CHB_Rx_AVAIL	0x04
#define	CHB_SPECIAL	0x06
#define	CHA_Tx_EMPTY	0x08
#define	CHA_EXT_STAT	0x0a
#define	CHA_Rx_AVAIL	0x0c
#define	CHA_SPECIAL	0x0e
#define	STATUS_MASK	0x06

/* Read Register 3 (interrupt pending register) ch a only */
#define	CHBEXT	0x1		/* Channel B Ext/Stat IP */
#define	CHBTxIP	0x2		/* Channel B Tx IP */
#define	CHBRxIP	0x4		/* Channel B Rx IP */
#define	CHAEXT	0x8		/* Channel A Ext/Stat IP */
#define	CHATxIP	0x10		/* Channel A Tx IP */
#define	CHARxIP	0x20		/* Channel A Rx IP */

/* Read Register 8 (receive data register) */

/* Read Register 10  (misc status bits) */
#define	ONLOOP	2		/* On loop */
#define	LOOPSEND 0x10		/* Loop sending */
#define	CLK2MIS	0x40		/* Two clocks missing */
#define	CLK1MIS	0x80		/* One clock missing */

/* Read Register 12 (lower byte of baud rate generator constant) */

/* Read Register 13 (upper byte of baud rate generator constant) */

/* Read Register 15 (value of WR 15) */

/* Misc macros */
#define ZS_CLEARERR(port)    (write_zsreg(port, 0, ERR_RES))
#define ZS_CLEARFIFO(port)   do { volatile unsigned char garbage; \
				     garbage = read_zsdata(port); \
				     garbage = read_zsdata(port); \
				     garbage = read_zsdata(port); \
				} while(0)

#define ZS_IS_CONS(UP)			((UP)->flags & PMACZILOG_FLAG_IS_CONS)
#define ZS_IS_KGDB(UP)			((UP)->flags & PMACZILOG_FLAG_IS_KGDB)
#define ZS_IS_CHANNEL_A(UP)		((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
#define ZS_REGS_HELD(UP)		((UP)->flags & PMACZILOG_FLAG_REGS_HELD)
#define ZS_TX_STOPPED(UP)		((UP)->flags & PMACZILOG_FLAG_TX_STOPPED)
#define ZS_TX_ACTIVE(UP)		((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE)
#define ZS_WANTS_MODEM_STATUS(UP)	((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS)
#define ZS_IS_IRDA(UP)			((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
#define ZS_IS_INTMODEM(UP)		((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
#define ZS_HAS_DMA(UP)			((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
#define ZS_IS_ASLEEP(UP)		((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
#define ZS_IS_OPEN(UP)			((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
#define ZS_IS_IRQ_ON(UP)		((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
#define ZS_IS_EXTCLK(UP)		((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)

#endif /* __PMAC_ZILOG_H__ */
Commit	Line	Data
1da177e4 LT	1	#ifndef __PMAC_ZILOG_H__
	2	#define __PMAC_ZILOG_H__
	3
ec9cbe09	4	#ifdef CONFIG_PPC_PMAC
1f7b5fff	5	#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
ec9cbe09 FT	6	#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
	7	#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
	8	#else
	9	#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg)
	10	#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg)
	11	#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg)
	12	#endif
1da177e4 LT	13
	14	/*
	15	* At most 2 ESCCs with 2 ports each
	16	*/
	17	#define MAX_ZS_PORTS 4
	18
	19	/*
	20	* We wrap our port structure around the generic uart_port.
	21	*/
	22	#define NUM_ZSREGS 17
	23
	24	struct uart_pmac_port {
	25	struct uart_port port;
	26	struct uart_pmac_port *mate;
	27
ec9cbe09	28	#ifdef CONFIG_PPC_PMAC
1da177e4 LT	29	/* macio_dev for the escc holding this port (maybe be null on
	30	* early inited port)
	31	*/
	32	struct macio_dev *dev;
	33	/* device node to this port, this points to one of 2 childs
	34	* of "escc" node (ie. ch-a or ch-b)
	35	*/
	36	struct device_node *node;
ec9cbe09 FT	37	#else
	38	struct platform_device *node;
	39	#endif
1da177e4 LT	40
	41	/* Port type as obtained from device tree (IRDA, modem, ...) */
	42	int port_type;
	43	u8 curregs[NUM_ZSREGS];
	44
	45	unsigned int flags;
	46	#define PMACZILOG_FLAG_IS_CONS 0x00000001
	47	#define PMACZILOG_FLAG_IS_KGDB 0x00000002
	48	#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004
	49	#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008
	50	#define PMACZILOG_FLAG_REGS_HELD 0x00000010
	51	#define PMACZILOG_FLAG_TX_STOPPED 0x00000020
	52	#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040
	53	#define PMACZILOG_FLAG_ENABLED 0x00000080
	54	#define PMACZILOG_FLAG_IS_IRDA 0x00000100
	55	#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200
	56	#define PMACZILOG_FLAG_HAS_DMA 0x00000400
	57	#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800
	58	#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000
	59	#define PMACZILOG_FLAG_IS_OPEN 0x00002000
	60	#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000
	61	#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000
	62	#define PMACZILOG_FLAG_BREAK 0x00010000
	63
	64	unsigned char parity_mask;
	65	unsigned char prev_status;
	66
	67	volatile u8 __iomem *control_reg;
	68	volatile u8 __iomem *data_reg;
	69
ec9cbe09	70	#ifdef CONFIG_PPC_PMAC
1da177e4 LT	71	unsigned int tx_dma_irq;
	72	unsigned int rx_dma_irq;
	73	volatile struct dbdma_regs __iomem *tx_dma_regs;
	74	volatile struct dbdma_regs __iomem *rx_dma_regs;
ec9cbe09	75	#endif
1da177e4	76
606d099c	77	struct ktermios termios_cache;
1da177e4 LT	78	};
	79
	80	#define to_pmz(p) ((struct uart_pmac_port *)(p))
	81
	82	static inline struct uart_pmac_port pmz_get_port_A(struct uart_pmac_port uap)
	83	{
	84	if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
	85	return uap;
	86	return uap->mate;
	87	}
	88
	89	/*
af901ca1	90	* Register accessors. Note that we don't need to enforce a recovery
1da177e4 LT	91	* delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
	92	* though if we try to use this driver on older machines, we might have
	93	* to add it back
	94	*/
	95	static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg)
	96	{
	97	if (reg != 0)
	98	writeb(reg, port->control_reg);
	99	return readb(port->control_reg);
	100	}
	101
	102	static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value)
	103	{
	104	if (reg != 0)
	105	writeb(reg, port->control_reg);
	106	writeb(value, port->control_reg);
	107	}
	108
	109	static inline u8 read_zsdata(struct uart_pmac_port *port)
	110	{
	111	return readb(port->data_reg);
	112	}
	113
	114	static inline void write_zsdata(struct uart_pmac_port *port, u8 data)
	115	{
	116	writeb(data, port->data_reg);
	117	}
	118
	119	static inline void zssync(struct uart_pmac_port *port)
	120	{
	121	(void)readb(port->control_reg);
	122	}
	123
	124	/* Conversion routines to/from brg time constants from/to bits
	125	* per second.
	126	*/
	127	#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
	128	#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
	129
1f7b5fff	130	#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */
1da177e4 LT	131
	132	/* The Zilog register set */
	133
	134	#define FLAG 0x7e
	135
	136	/* Write Register 0 */
	137	#define R0 0 /* Register selects */
	138	#define R1 1
	139	#define R2 2
	140	#define R3 3
	141	#define R4 4
	142	#define R5 5
	143	#define R6 6
	144	#define R7 7
	145	#define R8 8
	146	#define R9 9
	147	#define R10 10
	148	#define R11 11
	149	#define R12 12
	150	#define R13 13
	151	#define R14 14
	152	#define R15 15
	153	#define R7P 16
	154
	155	#define NULLCODE 0 /* Null Code */
	156	#define POINT_HIGH 0x8 /* Select upper half of registers */
	157	#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
	158	#define SEND_ABORT 0x18 /* HDLC Abort */
	159	#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
	160	#define RES_Tx_P 0x28 /* Reset TxINT Pending */
	161	#define ERR_RES 0x30 /* Error Reset */
	162	#define RES_H_IUS 0x38 /* Reset highest IUS */
	163
	164	#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
	165	#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
	166	#define RES_EOM_L 0xC0 /* Reset EOM latch */
	167
	168	/* Write Register 1 */
	169
	170	#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
	171	#define TxINT_ENAB 0x2 /* Tx Int Enable */
	172	#define PAR_SPEC 0x4 /* Parity is special condition */
	173
	174	#define RxINT_DISAB 0 /* Rx Int Disable */
	175	#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
	176	#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
	177	#define INT_ERR_Rx 0x18 /* Int on error only */
	178	#define RxINT_MASK 0x18
	179
	180	#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */
	181	#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */
	182	#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */
	183
	184	/* Write Register #2 (Interrupt Vector) */
	185
	186	/* Write Register 3 */
	187
1f7b5fff	188	#define RxENABLE 0x1 /* Rx Enable */
1da177e4 LT	189	#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
	190	#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
	191	#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
	192	#define ENT_HM 0x10 /* Enter Hunt Mode */
	193	#define AUTO_ENAB 0x20 /* Auto Enables */
	194	#define Rx5 0x0 /* Rx 5 Bits/Character */
	195	#define Rx7 0x40 /* Rx 7 Bits/Character */
	196	#define Rx6 0x80 /* Rx 6 Bits/Character */
	197	#define Rx8 0xc0 /* Rx 8 Bits/Character */
	198	#define RxN_MASK 0xc0
	199
	200	/* Write Register 4 */
	201
1f7b5fff	202	#define PAR_ENAB 0x1 /* Parity Enable */
1da177e4 LT	203	#define PAR_EVEN 0x2 /* Parity Even/Odd* */
	204
	205	#define SYNC_ENAB 0 /* Sync Modes Enable */
	206	#define SB1 0x4 /* 1 stop bit/char */
	207	#define SB15 0x8 /* 1.5 stop bits/char */
	208	#define SB2 0xc /* 2 stop bits/char */
	209	#define SB_MASK 0xc
	210
	211	#define MONSYNC 0 /* 8 Bit Sync character */
	212	#define BISYNC 0x10 /* 16 bit sync character */
	213	#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
	214	#define EXTSYNC 0x30 /* External Sync Mode */
	215
	216	#define X1CLK 0x0 /* x1 clock mode */
	217	#define X16CLK 0x40 /* x16 clock mode */
	218	#define X32CLK 0x80 /* x32 clock mode */
	219	#define X64CLK 0xC0 /* x64 clock mode */
	220	#define XCLK_MASK 0xC0
	221
	222	/* Write Register 5 */
	223
	224	#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
	225	#define RTS 0x2 /* RTS */
	226	#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
1f7b5fff	227	#define TxENABLE 0x8 /* Tx Enable */
1da177e4 LT	228	#define SND_BRK 0x10 /* Send Break */
	229	#define Tx5 0x0 /* Tx 5 bits (or less)/character */
	230	#define Tx7 0x20 /* Tx 7 bits/character */
	231	#define Tx6 0x40 /* Tx 6 bits/character */
	232	#define Tx8 0x60 /* Tx 8 bits/character */
	233	#define TxN_MASK 0x60
	234	#define DTR 0x80 /* DTR */
	235
	236	/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
	237
	238	/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
	239
	240	/* Write Register 7' (Some enhanced feature control) */
	241	#define ENEXREAD 0x40 /* Enable read of some write registers */
	242
	243	/* Write Register 8 (transmit buffer) */
	244
	245	/* Write Register 9 (Master interrupt control) */
	246	#define VIS 1 /* Vector Includes Status */
	247	#define NV 2 /* No Vector */
	248	#define DLC 4 /* Disable Lower Chain */
	249	#define MIE 8 /* Master Interrupt Enable */
	250	#define STATHI 0x10 /* Status high */
	251	#define NORESET 0 /* No reset on write to R9 */
	252	#define CHRB 0x40 /* Reset channel B */
	253	#define CHRA 0x80 /* Reset channel A */
	254	#define FHWRES 0xc0 /* Force hardware reset */
	255
	256	/* Write Register 10 (misc control bits) */
	257	#define BIT6 1 /* 6 bit/8bit sync */
	258	#define LOOPMODE 2 /* SDLC Loop mode */
	259	#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
	260	#define MARKIDLE 8 /* Mark/flag on idle */
	261	#define GAOP 0x10 /* Go active on poll */
	262	#define NRZ 0 /* NRZ mode */
	263	#define NRZI 0x20 /* NRZI mode */
	264	#define FM1 0x40 /* FM1 (transition = 1) */
	265	#define FM0 0x60 /* FM0 (transition = 0) */
	266	#define CRCPS 0x80 /* CRC Preset I/O */
	267
	268	/* Write Register 11 (Clock Mode control) */
	269	#define TRxCXT 0 /* TRxC = Xtal output */
	270	#define TRxCTC 1 /* TRxC = Transmit clock */
	271	#define TRxCBR 2 /* TRxC = BR Generator Output */
	272	#define TRxCDP 3 /* TRxC = DPLL output */
	273	#define TRxCOI 4 /* TRxC O/I */
	274	#define TCRTxCP 0 /* Transmit clock = RTxC pin */
	275	#define TCTRxCP 8 /* Transmit clock = TRxC pin */
	276	#define TCBR 0x10 /* Transmit clock = BR Generator output */
	277	#define TCDPLL 0x18 /* Transmit clock = DPLL output */
	278	#define RCRTxCP 0 /* Receive clock = RTxC pin */
	279	#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
	280	#define RCBR 0x40 /* Receive clock = BR Generator output */
	281	#define RCDPLL 0x60 /* Receive clock = DPLL output */
	282	#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
	283
	284	/* Write Register 12 (lower byte of baud rate generator time constant) */
	285
	286	/* Write Register 13 (upper byte of baud rate generator time constant) */
	287
	288	/* Write Register 14 (Misc control bits) */
	289	#define BRENAB 1 /* Baud rate generator enable */
	290	#define BRSRC 2 /* Baud rate generator source */
	291	#define DTRREQ 4 /* DTR/Request function */
292	#define AUTOECHO 8 /* Auto Echo */
293	#define LOOPBAK 0x10 /* Local loopback */
294	#define SEARCH 0x20 /* Enter search mode */
295	#define RMC 0x40 /* Reset missing clock */
296	#define DISDPLL 0x60 /* Disable DPLL */
297	#define SSBR 0x80 /* Set DPLL source = BR generator */
298	#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
299	#define SFMM 0xc0 /* Set FM mode */
300	#define SNRZI 0xe0 /* Set NRZI mode */
301
302	/* Write Register 15 (external/status interrupt control) */
303	#define EN85C30 1 /* Enable some 85c30-enhanced registers */
304	#define ZCIE 2 /* Zero count IE */
305	#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */
306	#define DCDIE 8 /* DCD IE */
307	#define SYNCIE 0x10 /* Sync/hunt IE */
308	#define CTSIE 0x20 /* CTS IE */
309	#define TxUIE 0x40 /* Tx Underrun/EOM IE */
310	#define BRKIE 0x80 /* Break/Abort IE */
311
312
313	/* Read Register 0 */
314	#define Rx_CH_AV 0x1 /* Rx Character Available */
315	#define ZCOUNT 0x2 /* Zero count */
316	#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
317	#define DCD 0x8 /* DCD */
318	#define SYNC_HUNT 0x10 /* Sync/hunt */
319	#define CTS 0x20 /* CTS */
320	#define TxEOM 0x40 /* Tx underrun */
321	#define BRK_ABRT 0x80 /* Break/Abort */
322
323	/* Read Register 1 */
324	#define ALL_SNT 0x1 /* All sent */
325	/* Residue Data for 8 Rx bits/char programmed */
326	#define RES3 0x8 /* 0/3 */
327	#define RES4 0x4 /* 0/4 */
328	#define RES5 0xc /* 0/5 */
329	#define RES6 0x2 /* 0/6 */
330	#define RES7 0xa /* 0/7 */
331	#define RES8 0x6 /* 0/8 */
332	#define RES18 0xe /* 1/8 */
333	#define RES28 0x0 /* 2/8 */
334	/* Special Rx Condition Interrupts */
335	#define PAR_ERR 0x10 /* Parity error */
336	#define Rx_OVR 0x20 /* Rx Overrun Error */
337	#define CRC_ERR 0x40 /* CRC/Framing Error */
338	#define END_FR 0x80 /* End of Frame (SDLC) */
339
340	/* Read Register 2 (channel b only) - Interrupt vector */
341	#define CHB_Tx_EMPTY 0x00
342	#define CHB_EXT_STAT 0x02
343	#define CHB_Rx_AVAIL 0x04
344	#define CHB_SPECIAL 0x06
345	#define CHA_Tx_EMPTY 0x08
346	#define CHA_EXT_STAT 0x0a
347	#define CHA_Rx_AVAIL 0x0c
348	#define CHA_SPECIAL 0x0e
349	#define STATUS_MASK 0x06
350
351	/* Read Register 3 (interrupt pending register) ch a only */
352	#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
353	#define CHBTxIP 0x2 /* Channel B Tx IP */
354	#define CHBRxIP 0x4 /* Channel B Rx IP */
355	#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
356	#define CHATxIP 0x10 /* Channel A Tx IP */
357	#define CHARxIP 0x20 /* Channel A Rx IP */
358
359	/* Read Register 8 (receive data register) */
360
361	/* Read Register 10 (misc status bits) */
362	#define ONLOOP 2 /* On loop */
363	#define LOOPSEND 0x10 /* Loop sending */
364	#define CLK2MIS 0x40 /* Two clocks missing */
365	#define CLK1MIS 0x80 /* One clock missing */
366
367	/* Read Register 12 (lower byte of baud rate generator constant) */
368
369	/* Read Register 13 (upper byte of baud rate generator constant) */
370
371	/* Read Register 15 (value of WR 15) */
372
373	/* Misc macros */
374	#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES))
375	#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \
376	garbage = read_zsdata(port); \
377	garbage = read_zsdata(port); \
378	garbage = read_zsdata(port); \
379	} while(0)
380
381	#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS)
382	#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB)
383	#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
384	#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD)
385	#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED)
386	#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE)
387	#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS)
388	#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
1f7b5fff	389	#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
1da177e4	390	#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
1f7b5fff FT	391	#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
	392	#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
	393	#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
	394	#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
1da177e4 LT	395
1da177e4 LT	396	#endif /* __PMAC_ZILOG_H__ */