[net-next-2.6.git] / drivers / scsi / pcmcia / qlogic_stub.c

/*======================================================================

    A driver for the Qlogic SCSI card

    qlogic_cs.c 1.79 2000/06/12 21:27:26

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU General Public License version 2 (the "GPL"), in which
    case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include <linux/interrupt.h>

#include "scsi.h"
#include <scsi/scsi_host.h>
#include "../qlogicfas408.h"

#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/ciscode.h>

/* Set the following to 2 to use normal interrupt (active high/totempole-
 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
 * drain
 */
#define INT_TYPE	0

static char qlogic_name[] = "qlogic_cs";

static struct scsi_host_template qlogicfas_driver_template = {
	.module			= THIS_MODULE,
	.name			= qlogic_name,
	.proc_name		= qlogic_name,
	.info			= qlogicfas408_info,
	.queuecommand		= qlogicfas408_queuecommand,
	.eh_abort_handler	= qlogicfas408_abort,
	.eh_bus_reset_handler	= qlogicfas408_bus_reset,
	.bios_param		= qlogicfas408_biosparam,
	.can_queue		= 1,
	.this_id		= -1,
	.sg_tablesize		= SG_ALL,
	.cmd_per_lun		= 1,
	.use_clustering		= DISABLE_CLUSTERING,
};

/*====================================================================*/

typedef struct scsi_info_t {
	struct pcmcia_device	*p_dev;
	struct Scsi_Host *host;
	unsigned short manf_id;
} scsi_info_t;

static void qlogic_release(struct pcmcia_device *link);
static void qlogic_detach(struct pcmcia_device *p_dev);
static int qlogic_config(struct pcmcia_device * link);

static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
				struct pcmcia_device *link, int qbase, int qlirq)
{
	int qltyp;		/* type of chip */
	int qinitid;
	struct Scsi_Host *shost;	/* registered host structure */
	struct qlogicfas408_priv *priv;

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	/* if no ID, use 7 */

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	host->name = qlogic_name;
	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!shost)
		goto err;
	shost->io_port = qbase;
	shost->n_io_port = 16;
	shost->dma_channel = -1;
	if (qlirq != -1)
		shost->irq = qlirq;

	priv = get_priv_by_host(shost);
	priv->qlirq = qlirq;
	priv->qbase = qbase;
	priv->qinitid = qinitid;
	priv->shost = shost;
	priv->int_type = INT_TYPE;					

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
		goto free_scsi_host;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);

	if (scsi_add_host(shost, NULL))
		goto free_interrupt;

	scsi_scan_host(shost);

	return shost;

free_interrupt:
	free_irq(qlirq, shost);

free_scsi_host:
	scsi_host_put(shost);
	
err:
	return NULL;
}
static int qlogic_probe(struct pcmcia_device *link)
{
	scsi_info_t *info;

	dev_dbg(&link->dev, "qlogic_attach()\n");

	/* Create new SCSI device */
	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;
	info->p_dev = link;
	link->priv = info;
	link->resource[0]->end = 16;
	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
	link->config_flags |= CONF_ENABLE_IRQ;
	link->config_regs = PRESENT_OPTION;

	return qlogic_config(link);
}				/* qlogic_attach */

/*====================================================================*/

static void qlogic_detach(struct pcmcia_device *link)
{
	dev_dbg(&link->dev, "qlogic_detach\n");

	qlogic_release(link);
	kfree(link->priv);

}				/* qlogic_detach */

/*====================================================================*/

static int qlogic_config_check(struct pcmcia_device *p_dev,
			       cistpl_cftable_entry_t *cfg,
			       cistpl_cftable_entry_t *dflt,
			       unsigned int vcc,
			       void *priv_data)
{
	p_dev->io_lines = 10;
	p_dev->resource[0]->start = cfg->io.win[0].base;
	p_dev->resource[0]->end = cfg->io.win[0].len;

	if (p_dev->resource[0]->start == 0)
		return -ENODEV;

	return pcmcia_request_io(p_dev);
}

static int qlogic_config(struct pcmcia_device * link)
{
	scsi_info_t *info = link->priv;
	int ret;
	struct Scsi_Host *host;

	dev_dbg(&link->dev, "qlogic_config\n");

	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	if (ret)
		goto failed;

	if (!link->irq)
		goto failed;

	ret = pcmcia_enable_device(link);
	if (ret)
		goto failed;

	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
		/* set ATAcmd */
		outb(0xb4, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}

	/* The KXL-810AN has a bigger IO port window */
	if (resource_size(link->resource[0]) == 32)
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start + 16, link->irq);
	else
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start, link->irq);
	
	if (!host) {
		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
		goto failed;
	}

	info->host = host;

	return 0;

failed:
	pcmcia_disable_device(link);
	return -ENODEV;
}				/* qlogic_config */

/*====================================================================*/

static void qlogic_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	dev_dbg(&link->dev, "qlogic_release\n");

	scsi_remove_host(info->host);

	free_irq(link->irq, info->host);
	pcmcia_disable_device(link);

	scsi_host_put(info->host);
}

/*====================================================================*/

static int qlogic_resume(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	pcmcia_enable_device(link);
	if ((info->manf_id == MANFID_MACNICA) ||
	    (info->manf_id == MANFID_PIONEER) ||
	    (info->manf_id == 0x0098)) {
		outb(0x80, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}
	/* Ugggglllyyyy!!! */
	qlogicfas408_bus_reset(NULL);

	return 0;
}

static struct pcmcia_device_id qlogic_ids[] = {
	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	/* these conflict with other cards! */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);

static struct pcmcia_driver qlogic_cs_driver = {
	.owner		= THIS_MODULE,
	.drv		= {
	.name		= "qlogic_cs",
	},
	.probe		= qlogic_probe,
	.remove		= qlogic_detach,
	.id_table       = qlogic_ids,
	.resume		= qlogic_resume,
};

static int __init init_qlogic_cs(void)
{
	return pcmcia_register_driver(&qlogic_cs_driver);
}

static void __exit exit_qlogic_cs(void)
{
	pcmcia_unregister_driver(&qlogic_cs_driver);
}

MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
MODULE_LICENSE("GPL");
module_init(init_qlogic_cs);
module_exit(exit_qlogic_cs);
Commit	Line	Data
1da177e4 LT	1	/*======================================================================
	2
	3	A driver for the Qlogic SCSI card
	4
	5	qlogic_cs.c 1.79 2000/06/12 21:27:26
	6
	7	The contents of this file are subject to the Mozilla Public
	8	License Version 1.1 (the "License"); you may not use this file
	9	except in compliance with the License. You may obtain a copy of
	10	the License at http://www.mozilla.org/MPL/
	11
	12	Software distributed under the License is distributed on an "AS
	13	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	14	implied. See the License for the specific language governing
	15	rights and limitations under the License.
	16
	17	The initial developer of the original code is David A. Hinds
	18	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	19	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
	20
	21	Alternatively, the contents of this file may be used under the
	22	terms of the GNU General Public License version 2 (the "GPL"), in which
	23	case the provisions of the GPL are applicable instead of the
	24	above. If you wish to allow the use of your version of this file
	25	only under the terms of the GPL and not to allow others to use
	26	your version of this file under the MPL, indicate your decision
	27	by deleting the provisions above and replace them with the notice
	28	and other provisions required by the GPL. If you do not delete
	29	the provisions above, a recipient may use your version of this
	30	file under either the MPL or the GPL.
	31
	32	======================================================================*/
	33
	34	#include <linux/module.h>
	35	#include <linux/init.h>
	36	#include <linux/kernel.h>
1da177e4 LT	37	#include <linux/slab.h>
	38	#include <linux/string.h>
	39	#include <linux/ioport.h>
	40	#include <asm/io.h>
	41	#include <scsi/scsi.h>
	42	#include <linux/major.h>
	43	#include <linux/blkdev.h>
	44	#include <scsi/scsi_ioctl.h>
	45	#include <linux/interrupt.h>
	46
	47	#include "scsi.h"
	48	#include <scsi/scsi_host.h>
	49	#include "../qlogicfas408.h"
	50
1da177e4 LT	51	#include <pcmcia/cistpl.h>
	52	#include <pcmcia/ds.h>
	53	#include <pcmcia/ciscode.h>
	54
	55	/* Set the following to 2 to use normal interrupt (active high/totempole-
	56	* tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
	57	* drain
	58	*/
	59	#define INT_TYPE 0
	60
	61	static char qlogic_name[] = "qlogic_cs";
	62
d0be4a7d	63	static struct scsi_host_template qlogicfas_driver_template = {
1da177e4 LT	64	.module = THIS_MODULE,
	65	.name = qlogic_name,
	66	.proc_name = qlogic_name,
	67	.info = qlogicfas408_info,
	68	.queuecommand = qlogicfas408_queuecommand,
	69	.eh_abort_handler = qlogicfas408_abort,
	70	.eh_bus_reset_handler = qlogicfas408_bus_reset,
1da177e4 LT	71	.bios_param = qlogicfas408_biosparam,
	72	.can_queue = 1,
	73	.this_id = -1,
	74	.sg_tablesize = SG_ALL,
	75	.cmd_per_lun = 1,
	76	.use_clustering = DISABLE_CLUSTERING,
	77	};
	78
	79	/====================================================================/
	80
	81	typedef struct scsi_info_t {
fd238232	82	struct pcmcia_device *p_dev;
1da177e4 LT	83	struct Scsi_Host *host;
	84	unsigned short manf_id;
	85	} scsi_info_t;
	86
fba395ee	87	static void qlogic_release(struct pcmcia_device *link);
cc3b4866	88	static void qlogic_detach(struct pcmcia_device *p_dev);
15b99ac1	89	static int qlogic_config(struct pcmcia_device * link);
1da177e4	90
d0be4a7d	91	static struct Scsi_Host qlogic_detect(struct scsi_host_template host,
fba395ee	92	struct pcmcia_device *link, int qbase, int qlirq)
1da177e4 LT	93	{
	94	int qltyp; /* type of chip */
	95	int qinitid;
	96	struct Scsi_Host shost; / registered host structure */
	97	struct qlogicfas408_priv *priv;
	98
	99	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	100	qinitid = host->this_id;
	101	if (qinitid < 0)
	102	qinitid = 7; /* if no ID, use 7 */
	103
	104	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
	105
	106	host->name = qlogic_name;
	107	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	108	if (!shost)
	109	goto err;
	110	shost->io_port = qbase;
	111	shost->n_io_port = 16;
	112	shost->dma_channel = -1;
	113	if (qlirq != -1)
	114	shost->irq = qlirq;
	115
	116	priv = get_priv_by_host(shost);
	117	priv->qlirq = qlirq;
	118	priv->qbase = qbase;
	119	priv->qinitid = qinitid;
	120	priv->shost = shost;
	121	priv->int_type = INT_TYPE;
	122
	123	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
	124	goto free_scsi_host;
	125
	126	sprintf(priv->qinfo,
	127	"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
	128	qltyp, qbase, qlirq, QL_TURBO_PDMA);
	129
	130	if (scsi_add_host(shost, NULL))
	131	goto free_interrupt;
	132
	133	scsi_scan_host(shost);
	134
	135	return shost;
	136
	137	free_interrupt:
	138	free_irq(qlirq, shost);
	139
	140	free_scsi_host:
	141	scsi_host_put(shost);
	142
	143	err:
	144	return NULL;
	145	}
15b99ac1	146	static int qlogic_probe(struct pcmcia_device *link)
1da177e4 LT	147	{
1da177e4 LT	148	scsi_info_t *info;
1da177e4	149
3e716617	150	dev_dbg(&link->dev, "qlogic_attach()\n");
1da177e4 LT	151
1da177e4 LT	152	/* Create new SCSI device */
dd00cc48	153	info = kzalloc(sizeof(*info), GFP_KERNEL);
1da177e4	154	if (!info)
f8cfa618	155	return -ENOMEM;
fba395ee	156	info->p_dev = link;
1da177e4	157	link->priv = info;
90abdc3b DB	158	link->resource[0]->end = 16;
90abdc3b DB	159	link->resource[0]->flags \|= IO_DATA_PATH_WIDTH_AUTO;
1ac71e5a	160	link->config_flags \|= CONF_ENABLE_IRQ;
7feabb64	161	link->config_regs = PRESENT_OPTION;
1da177e4	162
15b99ac1	163	return qlogic_config(link);
1da177e4 LT	164	} /* qlogic_attach */
	165
	166	/====================================================================/
	167
fba395ee	168	static void qlogic_detach(struct pcmcia_device *link)
1da177e4	169	{
3e716617	170	dev_dbg(&link->dev, "qlogic_detach\n");
1da177e4	171
e2d40963	172	qlogic_release(link);
1da177e4 LT	173	kfree(link->priv);
	174
	175	} /* qlogic_detach */
	176
	177	/====================================================================/
	178
0e6f9d27	179	static int qlogic_config_check(struct pcmcia_device *p_dev,
8e2fc39d DB	180	cistpl_cftable_entry_t *cfg,
8e2fc39d DB	181	cistpl_cftable_entry_t *dflt,
ad913c11	182	unsigned int vcc,
8e2fc39d	183	void *priv_data)
0e6f9d27	184	{
90abdc3b DB	185	p_dev->io_lines = 10;
	186	p_dev->resource[0]->start = cfg->io.win[0].base;
	187	p_dev->resource[0]->end = cfg->io.win[0].len;
0e6f9d27	188
90abdc3b	189	if (p_dev->resource[0]->start == 0)
0e6f9d27 DB	190	return -ENODEV;
0e6f9d27 DB	191
90abdc3b	192	return pcmcia_request_io(p_dev);
0e6f9d27 DB	193	}
0e6f9d27 DB	194
15b99ac1	195	static int qlogic_config(struct pcmcia_device * link)
1da177e4	196	{
1da177e4	197	scsi_info_t *info = link->priv;
3e716617	198	int ret;
1da177e4 LT	199	struct Scsi_Host *host;
1da177e4 LT	200
3e716617	201	dev_dbg(&link->dev, "qlogic_config\n");
1da177e4	202
3e716617 DB	203	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	204	if (ret)
	205	goto failed;
	206
eb14120f	207	if (!link->irq)
0e6f9d27	208	goto failed;
1da177e4	209
1ac71e5a	210	ret = pcmcia_enable_device(link);
3e716617 DB	211	if (ret)
3e716617 DB	212	goto failed;
1da177e4 LT	213
	214	if ((info->manf_id == MANFID_MACNICA) \|\| (info->manf_id == MANFID_PIONEER) \|\| (info->manf_id == 0x0098)) {
	215	/* set ATAcmd */
9a017a91 DB	216	outb(0xb4, link->resource[0]->start + 0xd);
	217	outb(0x24, link->resource[0]->start + 0x9);
	218	outb(0x04, link->resource[0]->start + 0xd);
1da177e4 LT	219	}
	220
	221	/* The KXL-810AN has a bigger IO port window */
9a017a91	222	if (resource_size(link->resource[0]) == 32)
1da177e4	223	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	224	link->resource[0]->start + 16, link->irq);
1da177e4 LT	225	else
1da177e4 LT	226	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	227	link->resource[0]->start, link->irq);
1da177e4 LT	228
	229	if (!host) {
	230	printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
3e716617	231	goto failed;
1da177e4 LT	232	}
1da177e4 LT	233
1da177e4 LT	234	info->host = host;
1da177e4 LT	235
15b99ac1	236	return 0;
1da177e4	237
0e6f9d27	238	failed:
3e716617	239	pcmcia_disable_device(link);
15b99ac1	240	return -ENODEV;
1da177e4 LT	241	} /* qlogic_config */
	242
	243	/====================================================================/
	244
fba395ee	245	static void qlogic_release(struct pcmcia_device *link)
1da177e4 LT	246	{
	247	scsi_info_t *info = link->priv;
	248
3e716617	249	dev_dbg(&link->dev, "qlogic_release\n");
1da177e4 LT	250
1da177e4 LT	251	scsi_remove_host(info->host);
1da177e4	252
eb14120f	253	free_irq(link->irq, info->host);
fba395ee	254	pcmcia_disable_device(link);
1da177e4 LT	255
1da177e4 LT	256	scsi_host_put(info->host);
1da177e4 LT	257	}
	258
	259	/====================================================================/
	260
fba395ee	261	static int qlogic_resume(struct pcmcia_device *link)
98e4c28b	262	{
e2d40963 DB	263	scsi_info_t *info = link->priv;
e2d40963 DB	264
1ac71e5a	265	pcmcia_enable_device(link);
e2d40963 DB	266	if ((info->manf_id == MANFID_MACNICA) \|\|
	267	(info->manf_id == MANFID_PIONEER) \|\|
	268	(info->manf_id == 0x0098)) {
9a017a91 DB	269	outb(0x80, link->resource[0]->start + 0xd);
	270	outb(0x24, link->resource[0]->start + 0x9);
	271	outb(0x04, link->resource[0]->start + 0xd);
98e4c28b	272	}
e2d40963 DB	273	/* Ugggglllyyyy!!! */
e2d40963 DB	274	qlogicfas408_bus_reset(NULL);
98e4c28b DB	275
	276	return 0;
	277	}
	278
7a5a6eeb DB	279	static struct pcmcia_device_id qlogic_ids[] = {
	280	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	281	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	282	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	283	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	284	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	285	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	286	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	287	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	288	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	289	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	290	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	291	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	292	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	293	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	294	/* these conflict with other cards! */
	295	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	296	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	297	PCMCIA_DEVICE_NULL,
	298	};
	299	MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
1da177e4 LT	300
	301	static struct pcmcia_driver qlogic_cs_driver = {
	302	.owner = THIS_MODULE,
	303	.drv = {
	304	.name = "qlogic_cs",
	305	},
15b99ac1	306	.probe = qlogic_probe,
cc3b4866	307	.remove = qlogic_detach,
7a5a6eeb	308	.id_table = qlogic_ids,
98e4c28b	309	.resume = qlogic_resume,
1da177e4 LT	310	};
	311
	312	static int __init init_qlogic_cs(void)
	313	{
	314	return pcmcia_register_driver(&qlogic_cs_driver);
	315	}
	316
	317	static void __exit exit_qlogic_cs(void)
	318	{
	319	pcmcia_unregister_driver(&qlogic_cs_driver);
1da177e4 LT	320	}
	321
	322	MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
	323	MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
	324	MODULE_LICENSE("GPL");
	325	module_init(init_qlogic_cs);
	326	module_exit(exit_qlogic_cs);