]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/pci/hotplug/ibmphp_core.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
PCI: clean up resource alignment management
[net-next-2.6.git] / drivers / pci / hotplug / ibmphp_core.c
CommitLineData
1da177e4
LT		 1/*
2 * IBM Hot Plug Controller Driver
3 *
4 * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
5 *
6 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2001-2003 IBM Corp.
8 *
9 * All rights reserved.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
19 * NON INFRINGEMENT. See the GNU General Public License for more
20 * details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 * Send feedback to <gregkh@us.ibm.com>
27 *
28 */
29
30#include <linux/init.h>
31#include <linux/module.h>
32#include <linux/slab.h>
33#include <linux/pci.h>
34#include <linux/interrupt.h>
35#include <linux/delay.h>
36#include <linux/wait.h>
1da177e4 37#include "../pci.h"
fb9aa6f1 38#include "../../../arch/x86/pci/pci.h" /* for struct irq_routing_table */
1da177e4
LT		 39#include "ibmphp.h"
40
41#define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)
42#define attn_off(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNOFF)
43#define attn_LED_blink(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_BLINKLED)
44#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot (sl, READ_REVLEVEL, rev)
45#define get_hpc_options(sl, opt) ibmphp_hpc_readslot (sl, READ_HPCOPTIONS, opt)
46
47#define DRIVER_VERSION "0.6"
48#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver"
49
50int ibmphp_debug;
51
52static int debug;
53module_param(debug, bool, S_IRUGO | S_IWUSR);
54MODULE_PARM_DESC (debug, "Debugging mode enabled or not");
55MODULE_LICENSE ("GPL");
56MODULE_DESCRIPTION (DRIVER_DESC);
57
58struct pci_bus *ibmphp_pci_bus;
59static int max_slots;
60
61static int irqs[16]; /* PIC mode IRQ's we're using so far (in case MPS
62 * tables don't provide default info for empty slots */
63
64static int init_flag;
65
66/*
67static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8);
68
69static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value)
70{
71 return get_max_adapter_speed_1 (hs, value, 1);
72}
73*/
74static inline int get_cur_bus_info(struct slot **sl)
75{
76 int rc = 1;
77 struct slot * slot_cur = *sl;
78
79 debug("options = %x\n", slot_cur->ctrl->options);
80 debug("revision = %x\n", slot_cur->ctrl->revision);
81
82 if (READ_BUS_STATUS(slot_cur->ctrl))
83 rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
84
85 if (rc)
86 return rc;
87
88 slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
89 if (READ_BUS_MODE(slot_cur->ctrl))
90 slot_cur->bus_on->current_bus_mode =
91 CURRENT_BUS_MODE(slot_cur->busstatus);
92 else
93 slot_cur->bus_on->current_bus_mode = 0xFF;
94
95 debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n",
96 slot_cur->busstatus,
97 slot_cur->bus_on->current_speed,
98 slot_cur->bus_on->current_bus_mode);
99
100 *sl = slot_cur;
101 return 0;
102}
103
104static inline int slot_update(struct slot **sl)
105{
106 int rc;
107 rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
108 if (rc)
109 return rc;
110 if (!init_flag)
111 rc = get_cur_bus_info(sl);
112 return rc;
113}
114
115static int __init get_max_slots (void)
116{
117 struct slot * slot_cur;
118 struct list_head * tmp;
119 u8 slot_count = 0;
120
121 list_for_each(tmp, &ibmphp_slot_head) {
122 slot_cur = list_entry(tmp, struct slot, ibm_slot_list);
123 /* sometimes the hot-pluggable slots start with 4 (not always from 1) */
124 slot_count = max(slot_count, slot_cur->number);
125 }
126 return slot_count;
127}
128
129/* This routine will put the correct slot->device information per slot. It's
130 * called from initialization of the slot structures. It will also assign
131 * interrupt numbers per each slot.
132 * Parameters: struct slot
133 * Returns 0 or errors
134 */
135int ibmphp_init_devno(struct slot **cur_slot)
136{
137 struct irq_routing_table *rtable;
138 int len;
139 int loop;
140 int i;
141
142 rtable = pcibios_get_irq_routing_table();
143 if (!rtable) {
144 err("no BIOS routing table...\n");
145 return -ENOMEM;
146 }
147
148 len = (rtable->size - sizeof(struct irq_routing_table)) /
149 sizeof(struct irq_info);
150
151 if (!len)
152 return -1;
153 for (loop = 0; loop < len; loop++) {
154 if ((*cur_slot)->number == rtable->slots[loop].slot) {
155 if ((*cur_slot)->bus == rtable->slots[loop].bus) {
156 (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
157 for (i = 0; i < 4; i++)
158 (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
159 (int) (*cur_slot)->device, i);
160
161 debug("(*cur_slot)->irq[0] = %x\n",
162 (*cur_slot)->irq[0]);
163 debug("(*cur_slot)->irq[1] = %x\n",
164 (*cur_slot)->irq[1]);
165 debug("(*cur_slot)->irq[2] = %x\n",
166 (*cur_slot)->irq[2]);
167 debug("(*cur_slot)->irq[3] = %x\n",
168 (*cur_slot)->irq[3]);
169
170 debug("rtable->exlusive_irqs = %x\n",
171 rtable->exclusive_irqs);
172 debug("rtable->slots[loop].irq[0].bitmap = %x\n",
173 rtable->slots[loop].irq[0].bitmap);
174 debug("rtable->slots[loop].irq[1].bitmap = %x\n",
175 rtable->slots[loop].irq[1].bitmap);
176 debug("rtable->slots[loop].irq[2].bitmap = %x\n",
177 rtable->slots[loop].irq[2].bitmap);
178 debug("rtable->slots[loop].irq[3].bitmap = %x\n",
179 rtable->slots[loop].irq[3].bitmap);
180
181 debug("rtable->slots[loop].irq[0].link = %x\n",
182 rtable->slots[loop].irq[0].link);
183 debug("rtable->slots[loop].irq[1].link = %x\n",
184 rtable->slots[loop].irq[1].link);
185 debug("rtable->slots[loop].irq[2].link = %x\n",
186 rtable->slots[loop].irq[2].link);
187 debug("rtable->slots[loop].irq[3].link = %x\n",
188 rtable->slots[loop].irq[3].link);
189 debug("end of init_devno\n");
190 return 0;
191 }
192 }
193 }
194
195 return -1;
196}
197
198static inline int power_on(struct slot *slot_cur)
199{
200 u8 cmd = HPC_SLOT_ON;
201 int retval;
202
203 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
204 if (retval) {
205 err("power on failed\n");
206 return retval;
207 }
208 if (CTLR_RESULT(slot_cur->ctrl->status)) {
209 err("command not completed successfully in power_on\n");
210 return -EIO;
211 }
212 msleep(3000); /* For ServeRAID cards, and some 66 PCI */
213 return 0;
214}
215
216static inline int power_off(struct slot *slot_cur)
217{
218 u8 cmd = HPC_SLOT_OFF;
219 int retval;
220
221 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
222 if (retval) {
223 err("power off failed\n");
224 return retval;
225 }
226 if (CTLR_RESULT(slot_cur->ctrl->status)) {
227 err("command not completed successfully in power_off\n");
228 retval = -EIO;
229 }
230 return retval;
231}
232
233static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
234{
235 int rc = 0;
236 struct slot *pslot;
072888fa 237 u8 cmd = 0x00; /* avoid compiler warning */
1da177e4
LT		 238
239 debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
240 (ulong) hotplug_slot, value);
241 ibmphp_lock_operations();
072888fa 242
1da177e4
LT		 243
244 if (hotplug_slot) {
245 switch (value) {
246 case HPC_SLOT_ATTN_OFF:
247 cmd = HPC_SLOT_ATTNOFF;
248 break;
249 case HPC_SLOT_ATTN_ON:
250 cmd = HPC_SLOT_ATTNON;
251 break;
252 case HPC_SLOT_ATTN_BLINK:
253 cmd = HPC_SLOT_BLINKLED;
254 break;
255 default:
256 rc = -ENODEV;
257 err("set_attention_status - Error : invalid input [%x]\n",
258 value);
259 break;
260 }
261 if (rc == 0) {
262 pslot = hotplug_slot->private;
263 if (pslot)
264 rc = ibmphp_hpc_writeslot(pslot, cmd);
265 else
266 rc = -ENODEV;
267 }
268 } else
269 rc = -ENODEV;
270
271 ibmphp_unlock_operations();
272
273 debug("set_attention_status - Exit rc[%d]\n", rc);
274 return rc;
275}
276
277static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value)
278{
279 int rc = -ENODEV;
280 struct slot *pslot;
281 struct slot myslot;
282
283 debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
284 (ulong) hotplug_slot, (ulong) value);
285
286 ibmphp_lock_operations();
9df7fde5 287 if (hotplug_slot) {
1da177e4
LT		 288 pslot = hotplug_slot->private;
289 if (pslot) {
290 memcpy(&myslot, pslot, sizeof(struct slot));
291 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
292 &(myslot.status));
293 if (!rc)
294 rc = ibmphp_hpc_readslot(pslot,
295 READ_EXTSLOTSTATUS,
296 &(myslot.ext_status));
297 if (!rc)
298 *value = SLOT_ATTN(myslot.status,
299 myslot.ext_status);
300 }
301 }
302
303 ibmphp_unlock_operations();
304 debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value);
305 return rc;
306}
307
308static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value)
309{
310 int rc = -ENODEV;
311 struct slot *pslot;
312 struct slot myslot;
313
314 debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
315 (ulong) hotplug_slot, (ulong) value);
316 ibmphp_lock_operations();
9df7fde5 317 if (hotplug_slot) {
1da177e4
LT		 318 pslot = hotplug_slot->private;
319 if (pslot) {
320 memcpy(&myslot, pslot, sizeof(struct slot));
321 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
322 &(myslot.status));
323 if (!rc)
324 *value = SLOT_LATCH(myslot.status);
325 }
326 }
327
328 ibmphp_unlock_operations();
329 debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n",
330 rc, rc, *value);
331 return rc;
332}
333
334
335static int get_power_status(struct hotplug_slot *hotplug_slot, u8 * value)
336{
337 int rc = -ENODEV;
338 struct slot *pslot;
339 struct slot myslot;
340
341 debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
342 (ulong) hotplug_slot, (ulong) value);
343 ibmphp_lock_operations();
9df7fde5 344 if (hotplug_slot) {
1da177e4
LT		 345 pslot = hotplug_slot->private;
346 if (pslot) {
347 memcpy(&myslot, pslot, sizeof(struct slot));
348 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
349 &(myslot.status));
350 if (!rc)
351 *value = SLOT_PWRGD(myslot.status);
352 }
353 }
354
355 ibmphp_unlock_operations();
356 debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n",
357 rc, rc, *value);
358 return rc;
359}
360
361static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value)
362{
363 int rc = -ENODEV;
364 struct slot *pslot;
365 u8 present;
366 struct slot myslot;
367
368 debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
369 (ulong) hotplug_slot, (ulong) value);
370 ibmphp_lock_operations();
9df7fde5 371 if (hotplug_slot) {
1da177e4
LT		 372 pslot = hotplug_slot->private;
373 if (pslot) {
374 memcpy(&myslot, pslot, sizeof(struct slot));
375 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
376 &(myslot.status));
377 if (!rc) {
378 present = SLOT_PRESENT(myslot.status);
379 if (present == HPC_SLOT_EMPTY)
380 *value = 0;
381 else
382 *value = 1;
383 }
384 }
385 }
386
387 ibmphp_unlock_operations();
388 debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value);
389 return rc;
390}
391
392static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
393{
394 int rc = -ENODEV;
395 struct slot *pslot;
396 u8 mode = 0;
397
398 debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __FUNCTION__,
399 hotplug_slot, value);
400
401 ibmphp_lock_operations();
402
9df7fde5 403 if (hotplug_slot) {
1da177e4
LT		 404 pslot = hotplug_slot->private;
405 if (pslot) {
406 rc = 0;
407 mode = pslot->supported_bus_mode;
408 *value = pslot->supported_speed;
409 switch (*value) {
410 case BUS_SPEED_33:
411 break;
412 case BUS_SPEED_66:
413 if (mode == BUS_MODE_PCIX)
414 *value += 0x01;
415 break;
416 case BUS_SPEED_100:
417 case BUS_SPEED_133:
418 *value = pslot->supported_speed + 0x01;
419 break;
420 default:
421 /* Note (will need to change): there would be soon 256, 512 also */
422 rc = -ENODEV;
423 }
424 }
425 }
426
427 ibmphp_unlock_operations();
428 debug("%s - Exit rc[%d] value[%x]\n", __FUNCTION__, rc, *value);
429 return rc;
430}
431
432static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
433{
434 int rc = -ENODEV;
435 struct slot *pslot;
436 u8 mode = 0;
437
438 debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __FUNCTION__,
439 hotplug_slot, value);
440
441 ibmphp_lock_operations();
442
9df7fde5 443 if (hotplug_slot) {
1da177e4
LT		 444 pslot = hotplug_slot->private;
445 if (pslot) {
446 rc = get_cur_bus_info(&pslot);
447 if (!rc) {
448 mode = pslot->bus_on->current_bus_mode;
449 *value = pslot->bus_on->current_speed;
450 switch (*value) {
451 case BUS_SPEED_33:
452 break;
453 case BUS_SPEED_66:
454 if (mode == BUS_MODE_PCIX)
455 *value += 0x01;
456 else if (mode == BUS_MODE_PCI)
457 ;
458 else
459 *value = PCI_SPEED_UNKNOWN;
460 break;
461 case BUS_SPEED_100:
462 case BUS_SPEED_133:
463 *value += 0x01;
464 break;
465 default:
466 /* Note of change: there would also be 256, 512 soon */
467 rc = -ENODEV;
468 }
469 }
470 }
471 }
472
473 ibmphp_unlock_operations();
474 debug("%s - Exit rc[%d] value[%x]\n", __FUNCTION__, rc, *value);
475 return rc;
476}
477
478/*
479static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 * value, u8 flag)
480{
481 int rc = -ENODEV;
482 struct slot *pslot;
483 struct slot myslot;
484
485 debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n",
486 (ulong)hotplug_slot, (ulong) value);
487
488 if (flag)
489 ibmphp_lock_operations();
490
491 if (hotplug_slot && value) {
492 pslot = hotplug_slot->private;
493 if (pslot) {
494 memcpy(&myslot, pslot, sizeof(struct slot));
495 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
496 &(myslot.status));
497
498 if (!(SLOT_LATCH (myslot.status)) &&
499 (SLOT_PRESENT (myslot.status))) {
500 rc = ibmphp_hpc_readslot(pslot,
501 READ_EXTSLOTSTATUS,
502 &(myslot.ext_status));
503 if (!rc)
504 *value = SLOT_SPEED(myslot.ext_status);
505 } else
506 *value = MAX_ADAPTER_NONE;
507 }
508 }
509
510 if (flag)
511 ibmphp_unlock_operations();
512
513 debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value);
514 return rc;
515}
516
517static int get_bus_name(struct hotplug_slot *hotplug_slot, char * value)
518{
519 int rc = -ENODEV;
520 struct slot *pslot = NULL;
521
522 debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot);
523
524 ibmphp_lock_operations();
525
526 if (hotplug_slot) {
527 pslot = hotplug_slot->private;
528 if (pslot) {
529 rc = 0;
530 snprintf(value, 100, "Bus %x", pslot->bus);
531 }
532 } else
533 rc = -ENODEV;
534
535 ibmphp_unlock_operations();
536 debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
537 return rc;
538}
539*/
540
541/****************************************************************************
542 * This routine will initialize the ops data structure used in the validate
543 * function. It will also power off empty slots that are powered on since BIOS
544 * leaves those on, albeit disconnected
545 ****************************************************************************/
546static int __init init_ops(void)
547{
548 struct slot *slot_cur;
549 struct list_head *tmp;
550 int retval;
551 int rc;
552
553 list_for_each(tmp, &ibmphp_slot_head) {
554 slot_cur = list_entry(tmp, struct slot, ibm_slot_list);
555
556 if (!slot_cur)
557 return -ENODEV;
558
559 debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
560 slot_cur->number);
561 if (slot_cur->ctrl->revision == 0xFF)
562 if (get_ctrl_revision(slot_cur,
563 &slot_cur->ctrl->revision))
564 return -1;
565
566 if (slot_cur->bus_on->current_speed == 0xFF)
567 if (get_cur_bus_info(&slot_cur))
568 return -1;
569
570 if (slot_cur->ctrl->options == 0xFF)
571 if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
572 return -1;
573
574 retval = slot_update(&slot_cur);
575 if (retval)
576 return retval;
577
578 debug("status = %x\n", slot_cur->status);
579 debug("ext_status = %x\n", slot_cur->ext_status);
580 debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status));
581 debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
582 debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));
583
584 if ((SLOT_PWRGD(slot_cur->status)) &&
585 !(SLOT_PRESENT(slot_cur->status)) &&
586 !(SLOT_LATCH(slot_cur->status))) {
587 debug("BEFORE POWER OFF COMMAND\n");
588 rc = power_off(slot_cur);
589 if (rc)
590 return rc;
591
592 /* retval = slot_update(&slot_cur);
593 * if (retval)
594 * return retval;
595 * ibmphp_update_slot_info(slot_cur);
596 */
597 }
598 }
599 init_flag = 0;
600 return 0;
601}
602
603/* This operation will check whether the slot is within the bounds and
604 * the operation is valid to perform on that slot
605 * Parameters: slot, operation
606 * Returns: 0 or error codes
607 */
608static int validate(struct slot *slot_cur, int opn)
609{
610 int number;
611 int retval;
612
613 if (!slot_cur)
614 return -ENODEV;
615 number = slot_cur->number;
616 if ((number > max_slots) || (number < 0))
617 return -EBADSLT;
618 debug("slot_number in validate is %d\n", slot_cur->number);
619
620 retval = slot_update(&slot_cur);
621 if (retval)
622 return retval;
623
624 switch (opn) {
625 case ENABLE:
626 if (!(SLOT_PWRGD(slot_cur->status)) &&
627 (SLOT_PRESENT(slot_cur->status)) &&
628 !(SLOT_LATCH(slot_cur->status)))
629 return 0;
630 break;
631 case DISABLE:
632 if ((SLOT_PWRGD(slot_cur->status)) &&
633 (SLOT_PRESENT(slot_cur->status)) &&
634 !(SLOT_LATCH(slot_cur->status)))
635 return 0;
636 break;
637 default:
638 break;
639 }
640 err("validate failed....\n");
641 return -EINVAL;
642}
643
644/****************************************************************************
645 * This routine is for updating the data structures in the hotplug core
646 * Parameters: struct slot
647 * Returns: 0 or error
648 ****************************************************************************/
649int ibmphp_update_slot_info(struct slot *slot_cur)
650{
651 struct hotplug_slot_info *info;
652 int rc;
653 u8 bus_speed;
654 u8 mode;
655
656 info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
657 if (!info) {
658 err("out of system memory\n");
659 return -ENOMEM;
660 }
661
662 info->power_status = SLOT_PWRGD(slot_cur->status);
663 info->attention_status = SLOT_ATTN(slot_cur->status,
664 slot_cur->ext_status);
665 info->latch_status = SLOT_LATCH(slot_cur->status);
666 if (!SLOT_PRESENT(slot_cur->status)) {
667 info->adapter_status = 0;
668/* info->max_adapter_speed_status = MAX_ADAPTER_NONE; */
669 } else {
670 info->adapter_status = 1;
671/* get_max_adapter_speed_1(slot_cur->hotplug_slot,
672 &info->max_adapter_speed_status, 0); */
673 }
674
675 bus_speed = slot_cur->bus_on->current_speed;
676 mode = slot_cur->bus_on->current_bus_mode;
677
678 switch (bus_speed) {
679 case BUS_SPEED_33:
680 break;
681 case BUS_SPEED_66:
682 if (mode == BUS_MODE_PCIX)
683 bus_speed += 0x01;
684 else if (mode == BUS_MODE_PCI)
685 ;
686 else
687 bus_speed = PCI_SPEED_UNKNOWN;
688 break;
689 case BUS_SPEED_100:
690 case BUS_SPEED_133:
691 bus_speed += 0x01;
692 break;
693 default:
694 bus_speed = PCI_SPEED_UNKNOWN;
695 }
696
697 info->cur_bus_speed = bus_speed;
698 info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
699 // To do: bus_names
700
701 rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
702 kfree(info);
703 return rc;
704}
705
706
707/******************************************************************************
708 * This function will return the pci_func, given bus and devfunc, or NULL. It
709 * is called from visit routines
710 ******************************************************************************/
711
712static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function)
713{
714 struct pci_func *func_cur;
715 struct slot *slot_cur;
716 struct list_head * tmp;
717 list_for_each(tmp, &ibmphp_slot_head) {
718 slot_cur = list_entry(tmp, struct slot, ibm_slot_list);
719 if (slot_cur->func) {
720 func_cur = slot_cur->func;
721 while (func_cur) {
722 if ((func_cur->busno == busno) &&
723 (func_cur->device == device) &&
724 (func_cur->function == function))
725 return func_cur;
726 func_cur = func_cur->next;
727 }
728 }
729 }
730 return NULL;
731}
732
733/*************************************************************
734 * This routine frees up memory used by struct slot, including
735 * the pointers to pci_func, bus, hotplug_slot, controller,
736 * and deregistering from the hotplug core
737 *************************************************************/
738static void free_slots(void)
739{
740 struct slot *slot_cur;
741 struct list_head * tmp;
742 struct list_head * next;
743
744 debug("%s -- enter\n", __FUNCTION__);
745
746 list_for_each_safe(tmp, next, &ibmphp_slot_head) {
747 slot_cur = list_entry(tmp, struct slot, ibm_slot_list);
748 pci_hp_deregister(slot_cur->hotplug_slot);
749 }
750 debug("%s -- exit\n", __FUNCTION__);
751}
752
753static void ibm_unconfigure_device(struct pci_func *func)
754{
755 struct pci_dev *temp;
756 u8 j;
757
758 debug("inside %s\n", __FUNCTION__);
759 debug("func->device = %x, func->function = %x\n",
760 func->device, func->function);
761 debug("func->device << 3 | 0x0 = %x\n", func->device << 3 | 0x0);
762
763 for (j = 0; j < 0x08; j++) {
f362b8bf
JP		 764 temp = pci_get_bus_and_slot(func->busno, (func->device << 3) | j);
765 if (temp) {
1da177e4 766 pci_remove_bus_device(temp);
f362b8bf
JP		 767 pci_dev_put(temp);
768 }
1da177e4 769 }
f362b8bf 770 pci_dev_put(func->dev);
1da177e4
LT		 771}
772
773/*
774 * The following function is to fix kernel bug regarding
775 * getting bus entries, here we manually add those primary
776 * bus entries to kernel bus structure whenever apply
777 */
778static u8 bus_structure_fixup(u8 busno)
779{
780 struct pci_bus *bus;
781 struct pci_dev *dev;
782 u16 l;
783
784 if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno)))
785 return 1;
786
787 bus = kmalloc(sizeof(*bus), GFP_KERNEL);
788 if (!bus) {
789 err("%s - out of memory\n", __FUNCTION__);
790 return 1;
791 }
792 dev = kmalloc(sizeof(*dev), GFP_KERNEL);
793 if (!dev) {
794 kfree(bus);
795 err("%s - out of memory\n", __FUNCTION__);
796 return 1;
797 }
798
799 bus->number = busno;
800 bus->ops = ibmphp_pci_bus->ops;
801 dev->bus = bus;
802 for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) {
803 if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) &&
804 (l != 0x0000) && (l != 0xffff)) {
805 debug("%s - Inside bus_struture_fixup()\n",
806 __FUNCTION__);
807 pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL);
808 break;
809 }
810 }
811
812 kfree(dev);
813 kfree(bus);
814
815 return 0;
816}
817
818static int ibm_configure_device(struct pci_func *func)
819{
820 unsigned char bus;
821 struct pci_bus *child;
822 int num;
823 int flag = 0; /* this is to make sure we don't double scan the bus,
824 for bridged devices primarily */
825
826 if (!(bus_structure_fixup(func->busno)))
827 flag = 1;
828 if (func->dev == NULL)
f362b8bf 829 func->dev = pci_get_bus_and_slot(func->busno,
1da177e4
LT		 830 PCI_DEVFN(func->device, func->function));
831
832 if (func->dev == NULL) {
833 struct pci_bus *bus = pci_find_bus(0, func->busno);
834 if (!bus)
835 return 0;
836
837 num = pci_scan_slot(bus,
838 PCI_DEVFN(func->device, func->function));
839 if (num)
840 pci_bus_add_devices(bus);
841
f362b8bf 842 func->dev = pci_get_bus_and_slot(func->busno,
1da177e4
LT		 843 PCI_DEVFN(func->device, func->function));
844 if (func->dev == NULL) {
845 err("ERROR... : pci_dev still NULL\n");
846 return 0;
847 }
848 }
849 if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
850 pci_read_config_byte(func->dev, PCI_SECONDARY_BUS, &bus);
851 child = pci_add_new_bus(func->dev->bus, func->dev, bus);
852 pci_do_scan_bus(child);
853 }
854
855 return 0;
856}
857
858/*******************************************************
859 * Returns whether the bus is empty or not
860 *******************************************************/
861static int is_bus_empty(struct slot * slot_cur)
862{
863 int rc;
864 struct slot * tmp_slot;
865 u8 i = slot_cur->bus_on->slot_min;
866
867 while (i <= slot_cur->bus_on->slot_max) {
868 if (i == slot_cur->number) {
869 i++;
870 continue;
871 }
872 tmp_slot = ibmphp_get_slot_from_physical_num(i);
873 if (!tmp_slot)
874 return 0;
875 rc = slot_update(&tmp_slot);
876 if (rc)
877 return 0;
878 if (SLOT_PRESENT(tmp_slot->status) &&
879 SLOT_PWRGD(tmp_slot->status))
880 return 0;
881 i++;
882 }
883 return 1;
884}
885
886/***********************************************************
887 * If the HPC permits and the bus currently empty, tries to set the
888 * bus speed and mode at the maximum card and bus capability
889 * Parameters: slot
890 * Returns: bus is set (0) or error code
891 ***********************************************************/
892static int set_bus(struct slot * slot_cur)
893{
894 int rc;
895 u8 speed;
896 u8 cmd = 0x0;
897 int retval;
898 static struct pci_device_id ciobx[] = {
899 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
900 { },
901 };
902
903 debug("%s - entry slot # %d\n", __FUNCTION__, slot_cur->number);
904 if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
905 rc = slot_update(&slot_cur);
906 if (rc)
907 return rc;
908 speed = SLOT_SPEED(slot_cur->ext_status);
909 debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed);
910 switch (speed) {
911 case HPC_SLOT_SPEED_33:
912 cmd = HPC_BUS_33CONVMODE;
913 break;
914 case HPC_SLOT_SPEED_66:
915 if (SLOT_PCIX(slot_cur->ext_status)) {
916 if ((slot_cur->supported_speed >= BUS_SPEED_66) &&
917 (slot_cur->supported_bus_mode == BUS_MODE_PCIX))
918 cmd = HPC_BUS_66PCIXMODE;
919 else if (!SLOT_BUS_MODE(slot_cur->ext_status))
920 /* if max slot/bus capability is 66 pci
921 and there's no bus mode mismatch, then
922 the adapter supports 66 pci */
923 cmd = HPC_BUS_66CONVMODE;
924 else
925 cmd = HPC_BUS_33CONVMODE;
926 } else {
927 if (slot_cur->supported_speed >= BUS_SPEED_66)
928 cmd = HPC_BUS_66CONVMODE;
929 else
930 cmd = HPC_BUS_33CONVMODE;
931 }
932 break;
933 case HPC_SLOT_SPEED_133:
934 switch (slot_cur->supported_speed) {
935 case BUS_SPEED_33:
936 cmd = HPC_BUS_33CONVMODE;
937 break;
938 case BUS_SPEED_66:
939 if (slot_cur->supported_bus_mode == BUS_MODE_PCIX)
940 cmd = HPC_BUS_66PCIXMODE;
941 else
942 cmd = HPC_BUS_66CONVMODE;
943 break;
944 case BUS_SPEED_100:
945 cmd = HPC_BUS_100PCIXMODE;
946 break;
947 case BUS_SPEED_133:
948 /* This is to take care of the bug in CIOBX chip */
949 if (pci_dev_present(ciobx))
950 ibmphp_hpc_writeslot(slot_cur,
951 HPC_BUS_100PCIXMODE);
952 cmd = HPC_BUS_133PCIXMODE;
953 break;
954 default:
955 err("Wrong bus speed\n");
956 return -ENODEV;
957 }
958 break;
959 default:
960 err("wrong slot speed\n");
961 return -ENODEV;
962 }
963 debug("setting bus speed for slot %d, cmd %x\n",
964 slot_cur->number, cmd);
965 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
966 if (retval) {
967 err("setting bus speed failed\n");
968 return retval;
969 }
970 if (CTLR_RESULT(slot_cur->ctrl->status)) {
971 err("command not completed successfully in set_bus\n");
972 return -EIO;
973 }
974 }
975 /* This is for x440, once Brandon fixes the firmware,
976 will not need this delay */
977 msleep(1000);
978 debug("%s -Exit\n", __FUNCTION__);
979 return 0;
980}
981
982/* This routine checks the bus limitations that the slot is on from the BIOS.
983 * This is used in deciding whether or not to power up the slot.
984 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
985 * same bus)
986 * Parameters: slot
987 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
988 */
989static int check_limitations(struct slot *slot_cur)
990{
991 u8 i;
992 struct slot * tmp_slot;
993 u8 count = 0;
994 u8 limitation = 0;
995
996 for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) {
997 tmp_slot = ibmphp_get_slot_from_physical_num(i);
998 if (!tmp_slot)
999 return -ENODEV;
1000 if ((SLOT_PWRGD(tmp_slot->status)) &&
1001 !(SLOT_CONNECT(tmp_slot->status)))
1002 count++;
1003 }
1004 get_cur_bus_info(&slot_cur);
1005 switch (slot_cur->bus_on->current_speed) {
1006 case BUS_SPEED_33:
1007 limitation = slot_cur->bus_on->slots_at_33_conv;
1008 break;
1009 case BUS_SPEED_66:
1010 if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
1011 limitation = slot_cur->bus_on->slots_at_66_pcix;
1012 else
1013 limitation = slot_cur->bus_on->slots_at_66_conv;
1014 break;
1015 case BUS_SPEED_100:
1016 limitation = slot_cur->bus_on->slots_at_100_pcix;
1017 break;
1018 case BUS_SPEED_133:
1019 limitation = slot_cur->bus_on->slots_at_133_pcix;
1020 break;
1021 }
1022
1023 if ((count + 1) > limitation)
1024 return -EINVAL;
1025 return 0;
1026}
1027
1028static inline void print_card_capability(struct slot *slot_cur)
1029{
1030 info("capability of the card is ");
1031 if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
1032 info(" 133 MHz PCI-X\n");
1033 else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
1034 info(" 66 MHz PCI-X\n");
1035 else if ((slot_cur->ext_status & CARD_INFO) == PCI66)
1036 info(" 66 MHz PCI\n");
1037 else
1038 info(" 33 MHz PCI\n");
1039
1040}
1041
1042/* This routine will power on the slot, configure the device(s) and find the
1043 * drivers for them.
1044 * Parameters: hotplug_slot
1045 * Returns: 0 or failure codes
1046 */
1047static int enable_slot(struct hotplug_slot *hs)
1048{
1049 int rc, i, rcpr;
1050 struct slot *slot_cur;
1051 u8 function;
1052 struct pci_func *tmp_func;
1053
1054 ibmphp_lock_operations();
1055
1056 debug("ENABLING SLOT........\n");
1057 slot_cur = hs->private;
1058
1059 if ((rc = validate(slot_cur, ENABLE))) {
1060 err("validate function failed\n");
1061 goto error_nopower;
1062 }
1063
1064 attn_LED_blink(slot_cur);
1065
1066 rc = set_bus(slot_cur);
1067 if (rc) {
1068 err("was not able to set the bus\n");
1069 goto error_nopower;
1070 }
1071
1072 /*-----------------debugging------------------------------*/
1073 get_cur_bus_info(&slot_cur);
1074 debug("the current bus speed right after set_bus = %x\n",
1075 slot_cur->bus_on->current_speed);
1076 /*----------------------------------------------------------*/
1077
1078 rc = check_limitations(slot_cur);
1079 if (rc) {
1080 err("Adding this card exceeds the limitations of this bus.\n");
1081 err("(i.e., >1 133MHz cards running on same bus, or "
3fa63c7d 1082 ">2 66 PCI cards running on same bus.\n");
1da177e4
LT		 1083 err("Try hot-adding into another bus\n");
1084 rc = -EINVAL;
1085 goto error_nopower;
1086 }
1087
1088 rc = power_on(slot_cur);
1089
1090 if (rc) {
1091 err("something wrong when powering up... please see below for details\n");
1092 /* need to turn off before on, otherwise, blinking overwrites */
1093 attn_off(slot_cur);
1094 attn_on(slot_cur);
1095 if (slot_update(&slot_cur)) {
1096 attn_off(slot_cur);
1097 attn_on(slot_cur);
1098 rc = -ENODEV;
1099 goto exit;
1100 }
1101 /* Check to see the error of why it failed */
1102 if ((SLOT_POWER(slot_cur->status)) &&
1103 !(SLOT_PWRGD(slot_cur->status)))
1104 err("power fault occurred trying to power up\n");
1105 else if (SLOT_BUS_SPEED(slot_cur->status)) {
1106 err("bus speed mismatch occurred. please check "
1107 "current bus speed and card capability\n");
1108 print_card_capability(slot_cur);
1109 } else if (SLOT_BUS_MODE(slot_cur->ext_status)) {
1110 err("bus mode mismatch occurred. please check "
1111 "current bus mode and card capability\n");
1112 print_card_capability(slot_cur);
1113 }
1114 ibmphp_update_slot_info(slot_cur);
1115 goto exit;
1116 }
1117 debug("after power_on\n");
1118 /*-----------------------debugging---------------------------*/
1119 get_cur_bus_info(&slot_cur);
1120 debug("the current bus speed right after power_on = %x\n",
1121 slot_cur->bus_on->current_speed);
1122 /*----------------------------------------------------------*/
1123
1124 rc = slot_update(&slot_cur);
1125 if (rc)
1126 goto error_power;
1127
1128 rc = -EINVAL;
1129 if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
1130 err("power fault occurred trying to power up...\n");
1131 goto error_power;
1132 }
1133 if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) {
1134 err("bus speed mismatch occurred. please check current bus "
1135 "speed and card capability\n");
1136 print_card_capability(slot_cur);
1137 goto error_power;
1138 }
1139 /* Don't think this case will happen after above checks...
1140 * but just in case, for paranoia sake */
1141 if (!(SLOT_POWER(slot_cur->status))) {
1142 err("power on failed...\n");
1143 goto error_power;
1144 }
1145
f5afe806 1146 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
1da177e4
LT		 1147 if (!slot_cur->func) {
1148 /* We cannot do update_slot_info here, since no memory for
1149 * kmalloc n.e.ways, and update_slot_info allocates some */
1150 err("out of system memory\n");
1151 rc = -ENOMEM;
1152 goto error_power;
1153 }
1da177e4
LT		 1154 slot_cur->func->busno = slot_cur->bus;
1155 slot_cur->func->device = slot_cur->device;
1156 for (i = 0; i < 4; i++)
1157 slot_cur->func->irq[i] = slot_cur->irq[i];
1158
1159 debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n",
1160 slot_cur->bus, slot_cur->device);
1161
1162 if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) {
1163 err("configure_card was unsuccessful...\n");
1164 /* true because don't need to actually deallocate resources,
1165 * just remove references */
1166 ibmphp_unconfigure_card(&slot_cur, 1);
1167 debug("after unconfigure_card\n");
1168 slot_cur->func = NULL;
1169 rc = -ENOMEM;
1170 goto error_power;
1171 }
1172
1173 function = 0x00;
1174 do {
1175 tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device,
1176 function++);
1177 if (tmp_func && !(tmp_func->dev))
1178 ibm_configure_device(tmp_func);
1179 } while (tmp_func);
1180
1181 attn_off(slot_cur);
1182 if (slot_update(&slot_cur)) {
1183 rc = -EFAULT;
1184 goto exit;
1185 }
1186 ibmphp_print_test();
1187 rc = ibmphp_update_slot_info(slot_cur);
1188exit:
1189 ibmphp_unlock_operations();
1190 return rc;
1191
1192error_nopower:
1193 attn_off(slot_cur); /* need to turn off if was blinking b4 */
1194 attn_on(slot_cur);
1195error_cont:
1196 rcpr = slot_update(&slot_cur);
1197 if (rcpr) {
1198 rc = rcpr;
1199 goto exit;
1200 }
1201 ibmphp_update_slot_info(slot_cur);
1202 goto exit;
1203
1204error_power:
1205 attn_off(slot_cur); /* need to turn off if was blinking b4 */
1206 attn_on(slot_cur);
1207 rcpr = power_off(slot_cur);
1208 if (rcpr) {
1209 rc = rcpr;
1210 goto exit;
1211 }
1212 goto error_cont;
1213}
1214
1215/**************************************************************
1216* HOT REMOVING ADAPTER CARD *
1217* INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE *
1218* OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE *
1219 DISABLE POWER , *
1220**************************************************************/
1221static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot)
1222{
1223 struct slot *slot = hotplug_slot->private;
1224 int rc;
1225
1226 ibmphp_lock_operations();
1227 rc = ibmphp_do_disable_slot(slot);
1228 ibmphp_unlock_operations();
1229 return rc;
1230}
1231
1232int ibmphp_do_disable_slot(struct slot *slot_cur)
1233{
1234 int rc;
1235 u8 flag;
1236
1237 debug("DISABLING SLOT...\n");
1238
1239 if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) {
1240 return -ENODEV;
1241 }
1242
1243 flag = slot_cur->flag;
dc6712d1 1244 slot_cur->flag = 1;
1da177e4 1245
dc6712d1 1246 if (flag == 1) {
1da177e4
LT		 1247 rc = validate(slot_cur, DISABLE);
1248 /* checking if powered off already & valid slot # */
1249 if (rc)
1250 goto error;
1251 }
1252 attn_LED_blink(slot_cur);
1253
1254 if (slot_cur->func == NULL) {
1255 /* We need this for fncs's that were there on bootup */
f5afe806 1256 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
1da177e4
LT		 1257 if (!slot_cur->func) {
1258 err("out of system memory\n");
1259 rc = -ENOMEM;
1260 goto error;
1261 }
1da177e4
LT		 1262 slot_cur->func->busno = slot_cur->bus;
1263 slot_cur->func->device = slot_cur->device;
1264 }
1265
1266 ibm_unconfigure_device(slot_cur->func);
1267
1268 /* If we got here from latch suddenly opening on operating card or
1269 a power fault, there's no power to the card, so cannot
1270 read from it to determine what resources it occupied. This operation
1271 is forbidden anyhow. The best we can do is remove it from kernel
1272 lists at least */
1273
1274 if (!flag) {
1275 attn_off(slot_cur);
1276 return 0;
1277 }
1278
1279 rc = ibmphp_unconfigure_card(&slot_cur, 0);
1280 slot_cur->func = NULL;
1281 debug("in disable_slot. after unconfigure_card\n");
1282 if (rc) {
1283 err("could not unconfigure card.\n");
1284 goto error;
1285 }
1286
1287 rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF);
1288 if (rc)
1289 goto error;
1290
1291 attn_off(slot_cur);
1292 rc = slot_update(&slot_cur);
1293 if (rc)
1294 goto exit;
1295
1296 rc = ibmphp_update_slot_info(slot_cur);
1297 ibmphp_print_test();
1298exit:
1299 return rc;
1300
1301error:
1302 /* Need to turn off if was blinking b4 */
1303 attn_off(slot_cur);
1304 attn_on(slot_cur);
1305 if (slot_update(&slot_cur)) {
1306 rc = -EFAULT;
1307 goto exit;
1308 }
1309 if (flag)
1310 ibmphp_update_slot_info(slot_cur);
1311 goto exit;
1312}
1313
1314struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
1315 .owner = THIS_MODULE,
1316 .set_attention_status = set_attention_status,
1317 .enable_slot = enable_slot,
1318 .disable_slot = ibmphp_disable_slot,
1319 .hardware_test = NULL,
1320 .get_power_status = get_power_status,
1321 .get_attention_status = get_attention_status,
1322 .get_latch_status = get_latch_status,
1323 .get_adapter_status = get_adapter_present,
1324 .get_max_bus_speed = get_max_bus_speed,
1325 .get_cur_bus_speed = get_cur_bus_speed,
1326/* .get_max_adapter_speed = get_max_adapter_speed,
1327 .get_bus_name_status = get_bus_name,
1328*/
1329};
1330
1331static void ibmphp_unload(void)
1332{
1333 free_slots();
1334 debug("after slots\n");
1335 ibmphp_free_resources();
1336 debug("after resources\n");
1337 ibmphp_free_bus_info_queue();
1338 debug("after bus info\n");
1339 ibmphp_free_ebda_hpc_queue();
1340 debug("after ebda hpc\n");
1341 ibmphp_free_ebda_pci_rsrc_queue();
1342 debug("after ebda pci rsrc\n");
1343 kfree(ibmphp_pci_bus);
1344}
1345
1346static int __init ibmphp_init(void)
1347{
1348 struct pci_bus *bus;
1349 int i = 0;
1350 int rc = 0;
1351
1352 init_flag = 1;
1353
1354 info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
1355
1356 ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL);
1357 if (!ibmphp_pci_bus) {
1358 err("out of memory\n");
1359 rc = -ENOMEM;
1360 goto exit;
1361 }
1362
1363 bus = pci_find_bus(0, 0);
1364 if (!bus) {
1365 err("Can't find the root pci bus, can not continue\n");
1366 rc = -ENODEV;
1367 goto error;
1368 }
1369 memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus));
1370
1371 ibmphp_debug = debug;
1372
1373 ibmphp_hpc_initvars();
1374
1375 for (i = 0; i < 16; i++)
1376 irqs[i] = 0;
1377
1378 if ((rc = ibmphp_access_ebda()))
1379 goto error;
1380 debug("after ibmphp_access_ebda()\n");
1381
1382 if ((rc = ibmphp_rsrc_init()))
1383 goto error;
1384 debug("AFTER Resource & EBDA INITIALIZATIONS\n");
1385
1386 max_slots = get_max_slots();
1387
1388 if ((rc = ibmphp_register_pci()))
1389 goto error;
1390
1391 if (init_ops()) {
1392 rc = -ENODEV;
1393 goto error;
1394 }
1395
1396 ibmphp_print_test();
1397 if ((rc = ibmphp_hpc_start_poll_thread())) {
1398 goto error;
1399 }
1400
1401 /* lock ourselves into memory with a module
1402 * count of -1 so that no one can unload us. */
1403 module_put(THIS_MODULE);
1404
1405exit:
1406 return rc;
1407
1408error:
1409 ibmphp_unload();
1410 goto exit;
1411}
1412
1413static void __exit ibmphp_exit(void)
1414{
1415 ibmphp_hpc_stop_poll_thread();
1416 debug("after polling\n");
1417 ibmphp_unload();
1418 debug("done\n");
1419}
1420
1421module_init(ibmphp_init);
1422module_exit(ibmphp_exit);
Clone of davem's net-next-2.6 tree