]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/net/wireless/rtl818x/rtl8187_dev.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
rtl8187: Fix transmission count sent to mac80211
[net-next-2.6.git] / drivers / net / wireless / rtl818x / rtl8187_dev.c
CommitLineData
605bebe2
MW		 1/*
2 * Linux device driver for RTL8187
3 *
4 * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
5 * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
6 *
7 * Based on the r8187 driver, which is:
8 * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
9 *
3461fc12
LF		 10 * The driver was extended to the RTL8187B in 2008 by:
11 * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
12 * Hin-Tak Leung <htl10@users.sourceforge.net>
13 * Larry Finger <Larry.Finger@lwfinger.net>
14 *
0aec00ae
JL		 15 * Magic delays and register offsets below are taken from the original
16 * r8187 driver sources. Thanks to Realtek for their support!
605bebe2
MW		 17 *
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
21 */
22
23#include <linux/init.h>
24#include <linux/usb.h>
25#include <linux/delay.h>
26#include <linux/etherdevice.h>
27#include <linux/eeprom_93cx6.h>
28#include <net/mac80211.h>
29
30#include "rtl8187.h"
31#include "rtl8187_rtl8225.h"
32
33MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
34MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
3461fc12
LF		 35MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>");
36MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>");
37MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
f8a08c34 38MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
605bebe2
MW		 39MODULE_LICENSE("GPL");
40
41static struct usb_device_id rtl8187_table[] __devinitdata = {
7c7e6af3
AM		 42 /* Asus */
43 {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
eaca90da
FF		 44 /* Belkin */
45 {USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
605bebe2 46 /* Realtek */
f8a08c34
HTL		 47 {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
48 {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
49 {USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
746db510 50 {USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
605bebe2 51 /* Netgear */
f8a08c34
HTL		 52 {USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
53 {USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
fcd7cc14 54 {USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
c3cf60a9 55 /* HP */
f8a08c34 56 {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
9934550d 57 /* Sitecom */
f8a08c34 58 {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
f3c76918 59 {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
8f7c41d4
IK		 60 /* Abocom */
61 {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
605bebe2
MW		 62 {}
63};
64
65MODULE_DEVICE_TABLE(usb, rtl8187_table);
66
8318d78a
JB		 67static const struct ieee80211_rate rtl818x_rates[] = {
68 { .bitrate = 10, .hw_value = 0, },
69 { .bitrate = 20, .hw_value = 1, },
70 { .bitrate = 55, .hw_value = 2, },
71 { .bitrate = 110, .hw_value = 3, },
72 { .bitrate = 60, .hw_value = 4, },
73 { .bitrate = 90, .hw_value = 5, },
74 { .bitrate = 120, .hw_value = 6, },
75 { .bitrate = 180, .hw_value = 7, },
76 { .bitrate = 240, .hw_value = 8, },
77 { .bitrate = 360, .hw_value = 9, },
78 { .bitrate = 480, .hw_value = 10, },
79 { .bitrate = 540, .hw_value = 11, },
80};
81
82static const struct ieee80211_channel rtl818x_channels[] = {
83 { .center_freq = 2412 },
84 { .center_freq = 2417 },
85 { .center_freq = 2422 },
86 { .center_freq = 2427 },
87 { .center_freq = 2432 },
88 { .center_freq = 2437 },
89 { .center_freq = 2442 },
90 { .center_freq = 2447 },
91 { .center_freq = 2452 },
92 { .center_freq = 2457 },
93 { .center_freq = 2462 },
94 { .center_freq = 2467 },
95 { .center_freq = 2472 },
96 { .center_freq = 2484 },
97};
98
4150c572
JB		 99static void rtl8187_iowrite_async_cb(struct urb *urb)
100{
101 kfree(urb->context);
102 usb_free_urb(urb);
103}
104
105static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
106 void *data, u16 len)
107{
108 struct usb_ctrlrequest *dr;
109 struct urb *urb;
110 struct rtl8187_async_write_data {
111 u8 data[4];
112 struct usb_ctrlrequest dr;
113 } *buf;
ea8ee240 114 int rc;
4150c572
JB		 115
116 buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
117 if (!buf)
118 return;
119
120 urb = usb_alloc_urb(0, GFP_ATOMIC);
121 if (!urb) {
122 kfree(buf);
123 return;
124 }
125
126 dr = &buf->dr;
127
128 dr->bRequestType = RTL8187_REQT_WRITE;
129 dr->bRequest = RTL8187_REQ_SET_REG;
130 dr->wValue = addr;
131 dr->wIndex = 0;
132 dr->wLength = cpu_to_le16(len);
133
134 memcpy(buf, data, len);
135
136 usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
137 (unsigned char *)dr, buf, len,
138 rtl8187_iowrite_async_cb, buf);
ea8ee240
ON		 139 rc = usb_submit_urb(urb, GFP_ATOMIC);
140 if (rc < 0) {
141 kfree(buf);
142 usb_free_urb(urb);
143 }
4150c572
JB		 144}
145
146static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
147 __le32 *addr, u32 val)
148{
149 __le32 buf = cpu_to_le32(val);
150
151 rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
152 &buf, sizeof(buf));
153}
154
605bebe2
MW		 155void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
156{
157 struct rtl8187_priv *priv = dev->priv;
158
159 data <<= 8;
160 data |= addr | 0x80;
161
162 rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
163 rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
164 rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
165 rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
605bebe2
MW		 166}
167
168static void rtl8187_tx_cb(struct urb *urb)
169{
605bebe2 170 struct sk_buff *skb = (struct sk_buff *)urb->context;
e039fa4a 171 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
e6a9854b 172 struct ieee80211_hw *hw = info->rate_driver_data[0];
6f7853f3 173 struct rtl8187_priv *priv = hw->priv;
605bebe2 174
e6a9854b 175 usb_free_urb(info->rate_driver_data[1]);
6f7853f3
HTL		 176 skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
177 sizeof(struct rtl8187_tx_hdr));
e6a9854b 178 ieee80211_tx_info_clear_status(info);
3517afde
HRK		 179
180 if (!urb->status &&
181 !(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
182 priv->is_rtl8187b) {
183 skb_queue_tail(&priv->b_tx_status.queue, skb);
184
185 /* queue is "full", discard last items */
186 while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
187 struct sk_buff *old_skb;
188
189 dev_dbg(&priv->udev->dev,
190 "transmit status queue full\n");
191
192 old_skb = skb_dequeue(&priv->b_tx_status.queue);
193 ieee80211_tx_status_irqsafe(hw, old_skb);
194 }
195 } else {
196 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !urb->status)
197 info->flags |= IEEE80211_TX_STAT_ACK;
198 ieee80211_tx_status_irqsafe(hw, skb);
199 }
605bebe2
MW		 200}
201
e039fa4a 202static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
605bebe2
MW		 203{
204 struct rtl8187_priv *priv = dev->priv;
e039fa4a 205 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
6f7853f3
HTL		 206 unsigned int ep;
207 void *buf;
605bebe2 208 struct urb *urb;
98798f48
MW		 209 __le16 rts_dur = 0;
210 u32 flags;
ea8ee240 211 int rc;
605bebe2
MW		 212
213 urb = usb_alloc_urb(0, GFP_ATOMIC);
214 if (!urb) {
215 kfree_skb(skb);
216 return 0;
217 }
218
98798f48 219 flags = skb->len;
38e3b0d8 220 flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
aa68cbfb 221
e039fa4a 222 flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
8b7b1e05 223 if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
38e3b0d8 224 flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
e6a9854b 225 if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
38e3b0d8 226 flags |= RTL818X_TX_DESC_FLAG_RTS;
e039fa4a 227 flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
32bfd35d 228 rts_dur = ieee80211_rts_duration(dev, priv->vif,
e039fa4a 229 skb->len, info);
e6a9854b 230 } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
38e3b0d8 231 flags |= RTL818X_TX_DESC_FLAG_CTS;
e039fa4a 232 flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
aa68cbfb 233 }
98798f48 234
6f7853f3
HTL		 235 if (!priv->is_rtl8187b) {
236 struct rtl8187_tx_hdr *hdr =
237 (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
238 hdr->flags = cpu_to_le32(flags);
239 hdr->len = 0;
240 hdr->rts_duration = rts_dur;
3517afde 241 hdr->retry = cpu_to_le32(info->control.rates[0].count << 8);
6f7853f3
HTL		 242 buf = hdr;
243
244 ep = 2;
245 } else {
246 /* fc needs to be calculated before skb_push() */
247 unsigned int epmap[4] = { 6, 7, 5, 4 };
248 struct ieee80211_hdr *tx_hdr =
249 (struct ieee80211_hdr *)(skb->data);
250 u16 fc = le16_to_cpu(tx_hdr->frame_control);
251
252 struct rtl8187b_tx_hdr *hdr =
253 (struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
254 struct ieee80211_rate *txrate =
255 ieee80211_get_tx_rate(dev, info);
256 memset(hdr, 0, sizeof(*hdr));
257 hdr->flags = cpu_to_le32(flags);
258 hdr->rts_duration = rts_dur;
3517afde 259 hdr->retry = cpu_to_le32(info->control.rates[0].count << 8);
6f7853f3
HTL		 260 hdr->tx_duration =
261 ieee80211_generic_frame_duration(dev, priv->vif,
262 skb->len, txrate);
263 buf = hdr;
264
265 if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
266 ep = 12;
267 else
268 ep = epmap[skb_get_queue_mapping(skb)];
269 }
605bebe2 270
e6a9854b
JB		 271 info->rate_driver_data[0] = dev;
272 info->rate_driver_data[1] = urb;
6f7853f3
HTL		 273
274 usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
275 buf, skb->len, rtl8187_tx_cb, skb);
ea8ee240
ON		 276 rc = usb_submit_urb(urb, GFP_ATOMIC);
277 if (rc < 0) {
278 usb_free_urb(urb);
279 kfree_skb(skb);
280 }
605bebe2
MW		 281
282 return 0;
283}
284
285static void rtl8187_rx_cb(struct urb *urb)
286{
287 struct sk_buff *skb = (struct sk_buff *)urb->context;
288 struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
289 struct ieee80211_hw *dev = info->dev;
290 struct rtl8187_priv *priv = dev->priv;
605bebe2
MW		 291 struct ieee80211_rx_status rx_status = { 0 };
292 int rate, signal;
4150c572 293 u32 flags;
0ccd58fc 294 u32 quality;
605bebe2
MW		 295
296 spin_lock(&priv->rx_queue.lock);
297 if (skb->next)
298 __skb_unlink(skb, &priv->rx_queue);
299 else {
300 spin_unlock(&priv->rx_queue.lock);
301 return;
302 }
303 spin_unlock(&priv->rx_queue.lock);
304
305 if (unlikely(urb->status)) {
306 usb_free_urb(urb);
307 dev_kfree_skb_irq(skb);
308 return;
309 }
310
311 skb_put(skb, urb->actual_length);
6f7853f3
HTL		 312 if (!priv->is_rtl8187b) {
313 struct rtl8187_rx_hdr *hdr =
314 (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
315 flags = le32_to_cpu(hdr->flags);
316 signal = hdr->signal & 0x7f;
317 rx_status.antenna = (hdr->signal >> 7) & 1;
6f7853f3
HTL		 318 rx_status.noise = hdr->noise;
319 rx_status.mactime = le64_to_cpu(hdr->mac_time);
6f7853f3 320 priv->quality = signal;
0ccd58fc 321 rx_status.qual = priv->quality;
6f7853f3 322 priv->noise = hdr->noise;
0ccd58fc
LF		 323 rate = (flags >> 20) & 0xF;
324 if (rate > 3) { /* OFDM rate */
325 if (signal > 90)
326 signal = 90;
327 else if (signal < 25)
328 signal = 25;
329 signal = 90 - signal;
330 } else { /* CCK rate */
331 if (signal > 95)
332 signal = 95;
333 else if (signal < 30)
334 signal = 30;
335 signal = 95 - signal;
336 }
337 rx_status.signal = signal;
338 priv->signal = signal;
6f7853f3
HTL		 339 } else {
340 struct rtl8187b_rx_hdr *hdr =
341 (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
0ccd58fc
LF		 342 /* The Realtek datasheet for the RTL8187B shows that the RX
343 * header contains the following quantities: signal quality,
344 * RSSI, AGC, the received power in dB, and the measured SNR.
345 * In testing, none of these quantities show qualitative
346 * agreement with AP signal strength, except for the AGC,
347 * which is inversely proportional to the strength of the
348 * signal. In the following, the quality and signal strength
349 * are derived from the AGC. The arbitrary scaling constants
350 * are chosen to make the results close to the values obtained
351 * for a BCM4312 using b43 as the driver. The noise is ignored
352 * for now.
353 */
6f7853f3 354 flags = le32_to_cpu(hdr->flags);
0ccd58fc
LF		 355 quality = 170 - hdr->agc;
356 if (quality > 100)
357 quality = 100;
358 signal = 14 - hdr->agc / 2;
359 rx_status.qual = quality;
360 priv->quality = quality;
361 rx_status.signal = signal;
362 priv->signal = signal;
363 rx_status.antenna = (hdr->rssi >> 7) & 1;
6f7853f3 364 rx_status.mactime = le64_to_cpu(hdr->mac_time);
0ccd58fc 365 rate = (flags >> 20) & 0xF;
6f7853f3 366 }
605bebe2 367
6f7853f3 368 skb_trim(skb, flags & 0x0FFF);
8318d78a
JB		 369 rx_status.rate_idx = rate;
370 rx_status.freq = dev->conf.channel->center_freq;
371 rx_status.band = dev->conf.channel->band;
03bffc13 372 rx_status.flag |= RX_FLAG_TSFT;
38e3b0d8 373 if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
4150c572 374 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
605bebe2
MW		 375 ieee80211_rx_irqsafe(dev, skb, &rx_status);
376
377 skb = dev_alloc_skb(RTL8187_MAX_RX);
378 if (unlikely(!skb)) {
379 usb_free_urb(urb);
380 /* TODO check rx queue length and refill *somewhere* */
381 return;
382 }
383
384 info = (struct rtl8187_rx_info *)skb->cb;
385 info->urb = urb;
386 info->dev = dev;
387 urb->transfer_buffer = skb_tail_pointer(skb);
388 urb->context = skb;
389 skb_queue_tail(&priv->rx_queue, skb);
390
391 usb_submit_urb(urb, GFP_ATOMIC);
392}
393
394static int rtl8187_init_urbs(struct ieee80211_hw *dev)
395{
396 struct rtl8187_priv *priv = dev->priv;
397 struct urb *entry;
398 struct sk_buff *skb;
399 struct rtl8187_rx_info *info;
400
401 while (skb_queue_len(&priv->rx_queue) < 8) {
402 skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
403 if (!skb)
404 break;
405 entry = usb_alloc_urb(0, GFP_KERNEL);
406 if (!entry) {
407 kfree_skb(skb);
408 break;
409 }
410 usb_fill_bulk_urb(entry, priv->udev,
6f7853f3
HTL		 411 usb_rcvbulkpipe(priv->udev,
412 priv->is_rtl8187b ? 3 : 1),
605bebe2
MW		 413 skb_tail_pointer(skb),
414 RTL8187_MAX_RX, rtl8187_rx_cb, skb);
415 info = (struct rtl8187_rx_info *)skb->cb;
416 info->urb = entry;
417 info->dev = dev;
418 skb_queue_tail(&priv->rx_queue, skb);
419 usb_submit_urb(entry, GFP_KERNEL);
420 }
421
422 return 0;
423}
424
3517afde
HRK		 425static void rtl8187b_status_cb(struct urb *urb)
426{
427 struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context;
428 struct rtl8187_priv *priv = hw->priv;
429 u64 val;
430 unsigned int cmd_type;
431
432 if (unlikely(urb->status)) {
433 usb_free_urb(urb);
434 return;
435 }
436
437 /*
438 * Read from status buffer:
439 *
440 * bits [30:31] = cmd type:
441 * - 0 indicates tx beacon interrupt
442 * - 1 indicates tx close descriptor
443 *
444 * In the case of tx beacon interrupt:
445 * [0:9] = Last Beacon CW
446 * [10:29] = reserved
447 * [30:31] = 00b
448 * [32:63] = Last Beacon TSF
449 *
450 * If it's tx close descriptor:
451 * [0:7] = Packet Retry Count
452 * [8:14] = RTS Retry Count
453 * [15] = TOK
454 * [16:27] = Sequence No
455 * [28] = LS
456 * [29] = FS
457 * [30:31] = 01b
458 * [32:47] = unused (reserved?)
459 * [48:63] = MAC Used Time
460 */
461 val = le64_to_cpu(priv->b_tx_status.buf);
462
463 cmd_type = (val >> 30) & 0x3;
464 if (cmd_type == 1) {
465 unsigned int pkt_rc, seq_no;
466 bool tok;
467 struct sk_buff *skb;
468 struct ieee80211_hdr *ieee80211hdr;
469 unsigned long flags;
470
471 pkt_rc = val & 0xFF;
472 tok = val & (1 << 15);
473 seq_no = (val >> 16) & 0xFFF;
474
475 spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags);
476 skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) {
477 ieee80211hdr = (struct ieee80211_hdr *)skb->data;
478
479 /*
480 * While testing, it was discovered that the seq_no
481 * doesn't actually contains the sequence number.
482 * Instead of returning just the 12 bits of sequence
483 * number, hardware is returning entire sequence control
484 * (fragment number plus sequence number) in a 12 bit
485 * only field overflowing after some time. As a
486 * workaround, just consider the lower bits, and expect
487 * it's unlikely we wrongly ack some sent data
488 */
489 if ((le16_to_cpu(ieee80211hdr->seq_ctrl)
490 & 0xFFF) == seq_no)
491 break;
492 }
493 if (skb != (struct sk_buff *) &priv->b_tx_status.queue) {
494 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
495
496 __skb_unlink(skb, &priv->b_tx_status.queue);
497 if (tok)
498 info->flags |= IEEE80211_TX_STAT_ACK;
1548c86a 499 info->status.rates[0].count = pkt_rc + 1;
3517afde
HRK		 500
501 ieee80211_tx_status_irqsafe(hw, skb);
502 }
503 spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags);
504 }
505
506 usb_submit_urb(urb, GFP_ATOMIC);
507}
508
509static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
510{
511 struct rtl8187_priv *priv = dev->priv;
512 struct urb *entry;
513
514 entry = usb_alloc_urb(0, GFP_KERNEL);
515 if (!entry)
516 return -ENOMEM;
517 priv->b_tx_status.urb = entry;
518
519 usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9),
520 &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf),
521 rtl8187b_status_cb, dev);
522
523 usb_submit_urb(entry, GFP_KERNEL);
524
525 return 0;
526}
527
f8a08c34 528static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
605bebe2
MW		 529{
530 struct rtl8187_priv *priv = dev->priv;
531 u8 reg;
532 int i;
533
605bebe2
MW		 534 reg = rtl818x_ioread8(priv, &priv->map->CMD);
535 reg &= (1 << 1);
536 reg |= RTL818X_CMD_RESET;
537 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
538
539 i = 10;
540 do {
541 msleep(2);
542 if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
543 RTL818X_CMD_RESET))
544 break;
545 } while (--i);
546
547 if (!i) {
548 printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
549 return -ETIMEDOUT;
550 }
551
552 /* reload registers from eeprom */
553 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
554
555 i = 10;
556 do {
557 msleep(4);
558 if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
559 RTL818X_EEPROM_CMD_CONFIG))
560 break;
561 } while (--i);
562
563 if (!i) {
564 printk(KERN_ERR "%s: eeprom reset timeout!\n",
565 wiphy_name(dev->wiphy));
566 return -ETIMEDOUT;
567 }
568
f8a08c34
HTL		 569 return 0;
570}
571
572static int rtl8187_init_hw(struct ieee80211_hw *dev)
573{
574 struct rtl8187_priv *priv = dev->priv;
575 u8 reg;
576 int res;
577
578 /* reset */
579 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
580 RTL818X_EEPROM_CMD_CONFIG);
581 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
582 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg |
583 RTL818X_CONFIG3_ANAPARAM_WRITE);
4ece16a1
HRK		 584 rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
585 RTL8187_RTL8225_ANAPARAM_ON);
586 rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
587 RTL8187_RTL8225_ANAPARAM2_ON);
f8a08c34
HTL		 588 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
589 ~RTL818X_CONFIG3_ANAPARAM_WRITE);
590 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
591 RTL818X_EEPROM_CMD_NORMAL);
592
593 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
594
595 msleep(200);
596 rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
597 rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
598 rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
599 msleep(200);
600
601 res = rtl8187_cmd_reset(dev);
602 if (res)
603 return res;
604
605bebe2
MW		 605 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
606 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
f8a08c34
HTL		 607 rtl818x_iowrite8(priv, &priv->map->CONFIG3,
608 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
4ece16a1
HRK		 609 rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
610 RTL8187_RTL8225_ANAPARAM_ON);
611 rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
612 RTL8187_RTL8225_ANAPARAM2_ON);
f8a08c34
HTL		 613 rtl818x_iowrite8(priv, &priv->map->CONFIG3,
614 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
605bebe2
MW		 615 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
616
617 /* setup card */
618 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
619 rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
620
621 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
622 rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
623 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
624
625 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
605bebe2
MW		 626
627 rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
628 reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
629 reg &= 0x3F;
630 reg |= 0x80;
631 rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
632
633 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
634
635 rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
636 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
637 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
638
639 // TODO: set RESP_RATE and BRSR properly
640 rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
641 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
642
643 /* host_usb_init */
644 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
645 rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
646 reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
647 rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
648 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
649 rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
650 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
651 rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
652 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
653 rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
654 msleep(100);
655
656 rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
657 rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
658 rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
f8a08c34
HTL		 659 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
660 RTL818X_EEPROM_CMD_CONFIG);
605bebe2 661 rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
f8a08c34
HTL		 662 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
663 RTL818X_EEPROM_CMD_NORMAL);
605bebe2
MW		 664 rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
665 msleep(100);
666
f6532111 667 priv->rf->init(dev);
605bebe2
MW		 668
669 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
f6532111
MW		 670 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
671 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
605bebe2
MW		 672 rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
673 rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
674 rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
f6532111 675 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
605bebe2
MW		 676
677 return 0;
678}
679
f8a08c34
HTL		 680static const u8 rtl8187b_reg_table[][3] = {
681 {0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
682 {0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
683 {0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
684 {0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
685
686 {0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
687 {0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
688 {0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xE0, 0xFF, 1}, {0xE1, 0x0F, 1},
689 {0xE2, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, {0xF2, 0x02, 1},
690 {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, {0xF6, 0x06, 1},
691 {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
692
693 {0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
694 {0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
695 {0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
696 {0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
697 {0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
698 {0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
699 {0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, {0x72, 0x56, 2},
700 {0x73, 0x9A, 2},
701
702 {0x34, 0xF0, 0}, {0x35, 0x0F, 0}, {0x5B, 0x40, 0}, {0x84, 0x88, 0},
703 {0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
704 {0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
705 {0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
706 {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x91, 0x03, 0},
707
708 {0x4C, 0x00, 2}, {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0},
709 {0x8E, 0x08, 0}, {0x8F, 0x00, 0}
710};
711
712static int rtl8187b_init_hw(struct ieee80211_hw *dev)
713{
714 struct rtl8187_priv *priv = dev->priv;
715 int res, i;
716 u8 reg;
717
718 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
719 RTL818X_EEPROM_CMD_CONFIG);
720
721 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
722 reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT;
723 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
4ece16a1
HRK		 724 rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
725 RTL8187B_RTL8225_ANAPARAM2_ON);
726 rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
727 RTL8187B_RTL8225_ANAPARAM_ON);
728 rtl818x_iowrite8(priv, &priv->map->ANAPARAM3,
729 RTL8187B_RTL8225_ANAPARAM3_ON);
f8a08c34
HTL		 730
731 rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
732 reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
733 rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
734 rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
735
736 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
737 reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
738 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
739
740 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
741 RTL818X_EEPROM_CMD_NORMAL);
742
743 res = rtl8187_cmd_reset(dev);
744 if (res)
745 return res;
746
747 rtl818x_iowrite16(priv, (__le16 *)0xFF2D, 0x0FFF);
748 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
749 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
750 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
751 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
752 reg |= RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT |
753 RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
754 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
755
756 rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
757 reg = rtl818x_ioread8(priv, &priv->map->RATE_FALLBACK);
758 reg |= RTL818X_RATE_FALLBACK_ENABLE;
759 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, reg);
760
761 rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
762 rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
763 rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
764
765 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
766 RTL818X_EEPROM_CMD_CONFIG);
767 reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
768 rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
769 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
770 RTL818X_EEPROM_CMD_NORMAL);
771
772 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
773 for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
774 rtl818x_iowrite8_idx(priv,
775 (u8 *)(uintptr_t)
776 (rtl8187b_reg_table[i][0] | 0xFF00),
777 rtl8187b_reg_table[i][1],
778 rtl8187b_reg_table[i][2]);
779 }
780
781 rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
782 rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
783
784 rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
785 rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
786 rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
787
788 rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
789
790 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
791
792 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
793 RTL818X_EEPROM_CMD_CONFIG);
794 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
795 reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
796 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
797 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
798 RTL818X_EEPROM_CMD_NORMAL);
799
800 rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
801 rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
802 rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
2f20596b 803 msleep(100);
f8a08c34
HTL		 804
805 priv->rf->init(dev);
806
807 reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
808 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
809 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
810
811 rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
812 rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
813 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
814 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
815 rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
816 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
817 rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
818
819 reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
820 rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
821 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
822 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
823 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
824 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
825 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
826 rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
827 rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
828 rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
829 rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
830 rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
831 rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
832
833 rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
834
835 rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
836
b4572a92
HRK		 837 priv->slot_time = 0x9;
838 priv->aifsn[0] = 2; /* AIFSN[AC_VO] */
839 priv->aifsn[1] = 2; /* AIFSN[AC_VI] */
840 priv->aifsn[2] = 7; /* AIFSN[AC_BK] */
841 priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
842 rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
843
f8a08c34
HTL		 844 return 0;
845}
846
4150c572 847static int rtl8187_start(struct ieee80211_hw *dev)
605bebe2
MW		 848{
849 struct rtl8187_priv *priv = dev->priv;
850 u32 reg;
851 int ret;
852
f8a08c34
HTL		 853 ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
854 rtl8187b_init_hw(dev);
605bebe2
MW		 855 if (ret)
856 return ret;
857
7dcdd073 858 mutex_lock(&priv->conf_mutex);
f8a08c34
HTL		 859 if (priv->is_rtl8187b) {
860 reg = RTL818X_RX_CONF_MGMT |
861 RTL818X_RX_CONF_DATA |
862 RTL818X_RX_CONF_BROADCAST |
863 RTL818X_RX_CONF_NICMAC |
864 RTL818X_RX_CONF_BSSID |
865 (7 << 13 /* RX FIFO threshold NONE */) |
866 (7 << 10 /* MAX RX DMA */) |
867 RTL818X_RX_CONF_RX_AUTORESETPHY |
868 RTL818X_RX_CONF_ONLYERLPKT |
869 RTL818X_RX_CONF_MULTICAST;
870 priv->rx_conf = reg;
871 rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
872
873 rtl818x_iowrite32(priv, &priv->map->TX_CONF,
874 RTL818X_TX_CONF_HW_SEQNUM |
875 RTL818X_TX_CONF_DISREQQSIZE |
876 (7 << 8 /* short retry limit */) |
877 (7 << 0 /* long retry limit */) |
878 (7 << 21 /* MAX TX DMA */));
879 rtl8187_init_urbs(dev);
3517afde 880 rtl8187b_init_status_urb(dev);
7dcdd073 881 mutex_unlock(&priv->conf_mutex);
f8a08c34
HTL		 882 return 0;
883 }
884
605bebe2
MW		 885 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
886
2fe14263
MW		 887 rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
888 rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
889
605bebe2
MW		 890 rtl8187_init_urbs(dev);
891
892 reg = RTL818X_RX_CONF_ONLYERLPKT |
893 RTL818X_RX_CONF_RX_AUTORESETPHY |
894 RTL818X_RX_CONF_BSSID |
895 RTL818X_RX_CONF_MGMT |
605bebe2
MW		 896 RTL818X_RX_CONF_DATA |
897 (7 << 13 /* RX FIFO threshold NONE */) |
898 (7 << 10 /* MAX RX DMA */) |
899 RTL818X_RX_CONF_BROADCAST |
605bebe2 900 RTL818X_RX_CONF_NICMAC;
605bebe2 901
4150c572 902 priv->rx_conf = reg;
605bebe2
MW		 903 rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
904
905 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
906 reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
907 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
908 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
909
910 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
911 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
912 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
913 reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
914 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
915
916 reg = RTL818X_TX_CONF_CW_MIN |
917 (7 << 21 /* MAX TX DMA */) |
918 RTL818X_TX_CONF_NO_ICV;
919 rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
920
921 reg = rtl818x_ioread8(priv, &priv->map->CMD);
922 reg |= RTL818X_CMD_TX_ENABLE;
923 reg |= RTL818X_CMD_RX_ENABLE;
924 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
7dcdd073 925 mutex_unlock(&priv->conf_mutex);
605bebe2
MW		 926
927 return 0;
928}
929
4150c572 930static void rtl8187_stop(struct ieee80211_hw *dev)
605bebe2
MW		 931{
932 struct rtl8187_priv *priv = dev->priv;
933 struct rtl8187_rx_info *info;
934 struct sk_buff *skb;
935 u32 reg;
936
7dcdd073 937 mutex_lock(&priv->conf_mutex);
605bebe2
MW		 938 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
939
940 reg = rtl818x_ioread8(priv, &priv->map->CMD);
941 reg &= ~RTL818X_CMD_TX_ENABLE;
942 reg &= ~RTL818X_CMD_RX_ENABLE;
943 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
944
f6532111 945 priv->rf->stop(dev);
605bebe2
MW		 946
947 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
948 reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
949 rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
950 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
951
952 while ((skb = skb_dequeue(&priv->rx_queue))) {
953 info = (struct rtl8187_rx_info *)skb->cb;
954 usb_kill_urb(info->urb);
955 kfree_skb(skb);
956 }
3517afde
HRK		 957 while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
958 dev_kfree_skb_any(skb);
959 usb_kill_urb(priv->b_tx_status.urb);
7dcdd073 960 mutex_unlock(&priv->conf_mutex);
605bebe2
MW		 961}
962
963static int rtl8187_add_interface(struct ieee80211_hw *dev,
964 struct ieee80211_if_init_conf *conf)
965{
966 struct rtl8187_priv *priv = dev->priv;
4150c572 967 int i;
605bebe2 968
05c914fe 969 if (priv->mode != NL80211_IFTYPE_MONITOR)
4150c572 970 return -EOPNOTSUPP;
605bebe2
MW		 971
972 switch (conf->type) {
05c914fe 973 case NL80211_IFTYPE_STATION:
605bebe2
MW		 974 priv->mode = conf->type;
975 break;
976 default:
977 return -EOPNOTSUPP;
978 }
979
7dcdd073 980 mutex_lock(&priv->conf_mutex);
aa979a6a
HRK		 981 priv->vif = conf->vif;
982
4150c572
JB		 983 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
984 for (i = 0; i < ETH_ALEN; i++)
985 rtl818x_iowrite8(priv, &priv->map->MAC[i],
986 ((u8 *)conf->mac_addr)[i]);
987 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
605bebe2 988
7dcdd073 989 mutex_unlock(&priv->conf_mutex);
605bebe2
MW		 990 return 0;
991}
992
993static void rtl8187_remove_interface(struct ieee80211_hw *dev,
994 struct ieee80211_if_init_conf *conf)
995{
996 struct rtl8187_priv *priv = dev->priv;
7dcdd073 997 mutex_lock(&priv->conf_mutex);
05c914fe 998 priv->mode = NL80211_IFTYPE_MONITOR;
aa979a6a 999 priv->vif = NULL;
7dcdd073 1000 mutex_unlock(&priv->conf_mutex);
605bebe2
MW		 1001}
1002
e8975581 1003static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
605bebe2
MW		 1004{
1005 struct rtl8187_priv *priv = dev->priv;
e8975581 1006 struct ieee80211_conf *conf = &dev->conf;
f6532111
MW		 1007 u32 reg;
1008
7dcdd073 1009 mutex_lock(&priv->conf_mutex);
f6532111
MW		 1010 reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
1011 /* Enable TX loopback on MAC level to avoid TX during channel
1012 * changes, as this has be seen to causes problems and the
1013 * card will stop work until next reset
1014 */
1015 rtl818x_iowrite32(priv, &priv->map->TX_CONF,
1016 reg | RTL818X_TX_CONF_LOOPBACK_MAC);
f6532111
MW		 1017 priv->rf->set_chan(dev, conf);
1018 msleep(10);
1019 rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
605bebe2 1020
605bebe2
MW		 1021 rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
1022 rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
1023 rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
1024 rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
7dcdd073 1025 mutex_unlock(&priv->conf_mutex);
605bebe2
MW		 1026 return 0;
1027}
1028
32bfd35d
JB		 1029static int rtl8187_config_interface(struct ieee80211_hw *dev,
1030 struct ieee80211_vif *vif,
605bebe2
MW		 1031 struct ieee80211_if_conf *conf)
1032{
1033 struct rtl8187_priv *priv = dev->priv;
1034 int i;
6f7853f3 1035 u8 reg;
605bebe2 1036
7dcdd073 1037 mutex_lock(&priv->conf_mutex);
605bebe2
MW		 1038 for (i = 0; i < ETH_ALEN; i++)
1039 rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
1040
6f7853f3
HTL		 1041 if (is_valid_ether_addr(conf->bssid)) {
1042 reg = RTL818X_MSR_INFRA;
1043 if (priv->is_rtl8187b)
1044 reg |= RTL818X_MSR_ENEDCA;
1045 rtl818x_iowrite8(priv, &priv->map->MSR, reg);
1046 } else {
1047 reg = RTL818X_MSR_NO_LINK;
1048 rtl818x_iowrite8(priv, &priv->map->MSR, reg);
1049 }
605bebe2 1050
7dcdd073 1051 mutex_unlock(&priv->conf_mutex);
605bebe2
MW		 1052 return 0;
1053}
1054
b4572a92
HRK		 1055/*
1056 * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
1057 * example. Thus we have to use raw values for AC_*_PARAM register addresses.
1058 */
1059static __le32 *rtl8187b_ac_addr[4] = {
1060 (__le32 *) 0xFFF0, /* AC_VO */
1061 (__le32 *) 0xFFF4, /* AC_VI */
1062 (__le32 *) 0xFFFC, /* AC_BK */
1063 (__le32 *) 0xFFF8, /* AC_BE */
1064};
1065
1066#define SIFS_TIME 0xa
1067
f8288317
HRK		 1068static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot,
1069 bool use_short_preamble)
64761077 1070{
f8288317 1071 if (priv->is_rtl8187b) {
b4572a92 1072 u8 difs, eifs;
f8288317 1073 u16 ack_timeout;
b4572a92 1074 int queue;
f8288317
HRK		 1075
1076 if (use_short_slot) {
b4572a92 1077 priv->slot_time = 0x9;
f8288317
HRK		 1078 difs = 0x1c;
1079 eifs = 0x53;
1080 } else {
b4572a92 1081 priv->slot_time = 0x14;
f8288317
HRK		 1082 difs = 0x32;
1083 eifs = 0x5b;
1084 }
54ac218a 1085 rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
b4572a92 1086 rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
f8288317
HRK		 1087 rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
1088
1089 /*
1090 * BRSR+1 on 8187B is in fact EIFS register
1091 * Value in units of 4 us
1092 */
1093 rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs);
1094
1095 /*
1096 * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout
1097 * register. In units of 4 us like eifs register
1098 * ack_timeout = ack duration + plcp + difs + preamble
1099 */
1100 ack_timeout = 112 + 48 + difs;
1101 if (use_short_preamble)
1102 ack_timeout += 72;
1103 else
1104 ack_timeout += 144;
1105 rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER,
1106 DIV_ROUND_UP(ack_timeout, 4));
b4572a92
HRK		 1107
1108 for (queue = 0; queue < 4; queue++)
1109 rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue],
1110 priv->aifsn[queue] * priv->slot_time +
1111 SIFS_TIME);
f8288317 1112 } else {
64761077
HRK		 1113 rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
1114 if (use_short_slot) {
1115 rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
1116 rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
1117 rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
64761077
HRK		 1118 } else {
1119 rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
1120 rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
1121 rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
64761077
HRK		 1122 }
1123 }
1124}
1125
1126static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
1127 struct ieee80211_vif *vif,
1128 struct ieee80211_bss_conf *info,
1129 u32 changed)
1130{
1131 struct rtl8187_priv *priv = dev->priv;
1132
f8288317
HRK		 1133 if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
1134 rtl8187_conf_erp(priv, info->use_short_slot,
1135 info->use_short_preamble);
64761077
HRK		 1136}
1137
4150c572
JB		 1138static void rtl8187_configure_filter(struct ieee80211_hw *dev,
1139 unsigned int changed_flags,
1140 unsigned int *total_flags,
2fe14263 1141 int mc_count, struct dev_addr_list *mclist)
4150c572
JB		 1142{
1143 struct rtl8187_priv *priv = dev->priv;
1144
4150c572
JB		 1145 if (changed_flags & FIF_FCSFAIL)
1146 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
1147 if (changed_flags & FIF_CONTROL)
1148 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
1149 if (changed_flags & FIF_OTHER_BSS)
1150 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
2fe14263 1151 if (*total_flags & FIF_ALLMULTI || mc_count > 0)
4150c572 1152 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
2fe14263
MW		 1153 else
1154 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
1155
1156 *total_flags = 0;
4150c572 1157
4150c572
JB		 1158 if (priv->rx_conf & RTL818X_RX_CONF_FCS)
1159 *total_flags |= FIF_FCSFAIL;
1160 if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
1161 *total_flags |= FIF_CONTROL;
1162 if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
1163 *total_flags |= FIF_OTHER_BSS;
2fe14263
MW		 1164 if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
1165 *total_flags |= FIF_ALLMULTI;
4150c572
JB		 1166
1167 rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
1168}
1169
b4572a92
HRK		 1170static int rtl8187_conf_tx(struct ieee80211_hw *dev, u16 queue,
1171 const struct ieee80211_tx_queue_params *params)
1172{
1173 struct rtl8187_priv *priv = dev->priv;
1174 u8 cw_min, cw_max;
1175
1176 if (queue > 3)
1177 return -EINVAL;
1178
1179 cw_min = fls(params->cw_min);
1180 cw_max = fls(params->cw_max);
1181
1182 if (priv->is_rtl8187b) {
1183 priv->aifsn[queue] = params->aifs;
1184
1185 /*
1186 * This is the structure of AC_*_PARAM registers in 8187B:
1187 * - TXOP limit field, bit offset = 16
1188 * - ECWmax, bit offset = 12
1189 * - ECWmin, bit offset = 8
1190 * - AIFS, bit offset = 0
1191 */
1192 rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue],
1193 (params->txop << 16) | (cw_max << 12) |
1194 (cw_min << 8) | (params->aifs *
1195 priv->slot_time + SIFS_TIME));
1196 } else {
1197 if (queue != 0)
1198 return -EINVAL;
1199
1200 rtl818x_iowrite8(priv, &priv->map->CW_VAL,
1201 cw_min | (cw_max << 4));
1202 }
1203 return 0;
1204}
1205
605bebe2
MW		 1206static const struct ieee80211_ops rtl8187_ops = {
1207 .tx = rtl8187_tx,
4150c572 1208 .start = rtl8187_start,
605bebe2
MW		 1209 .stop = rtl8187_stop,
1210 .add_interface = rtl8187_add_interface,
1211 .remove_interface = rtl8187_remove_interface,
1212 .config = rtl8187_config,
1213 .config_interface = rtl8187_config_interface,
64761077 1214 .bss_info_changed = rtl8187_bss_info_changed,
4150c572 1215 .configure_filter = rtl8187_configure_filter,
b4572a92 1216 .conf_tx = rtl8187_conf_tx
605bebe2
MW		 1217};
1218
1219static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
1220{
1221 struct ieee80211_hw *dev = eeprom->data;
1222 struct rtl8187_priv *priv = dev->priv;
1223 u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
1224
1225 eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
1226 eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
1227 eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
1228 eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
1229}
1230
1231static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
1232{
1233 struct ieee80211_hw *dev = eeprom->data;
1234 struct rtl8187_priv *priv = dev->priv;
1235 u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
1236
1237 if (eeprom->reg_data_in)
1238 reg |= RTL818X_EEPROM_CMD_WRITE;
1239 if (eeprom->reg_data_out)
1240 reg |= RTL818X_EEPROM_CMD_READ;
1241 if (eeprom->reg_data_clock)
1242 reg |= RTL818X_EEPROM_CMD_CK;
1243 if (eeprom->reg_chip_select)
1244 reg |= RTL818X_EEPROM_CMD_CS;
1245
1246 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
1247 udelay(10);
1248}
1249
1250static int __devinit rtl8187_probe(struct usb_interface *intf,
1251 const struct usb_device_id *id)
1252{
1253 struct usb_device *udev = interface_to_usbdev(intf);
1254 struct ieee80211_hw *dev;
1255 struct rtl8187_priv *priv;
1256 struct eeprom_93cx6 eeprom;
1257 struct ieee80211_channel *channel;
6f7853f3 1258 const char *chip_name;
605bebe2
MW		 1259 u16 txpwr, reg;
1260 int err, i;
1261
1262 dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
1263 if (!dev) {
1264 printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
1265 return -ENOMEM;
1266 }
1267
1268 priv = dev->priv;
0e25b4ef 1269 priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
605bebe2
MW		 1270
1271 SET_IEEE80211_DEV(dev, &intf->dev);
1272 usb_set_intfdata(intf, dev);
1273 priv->udev = udev;
1274
1275 usb_get_dev(udev);
1276
1277 skb_queue_head_init(&priv->rx_queue);
8318d78a
JB		 1278
1279 BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
1280 BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
1281
605bebe2
MW		 1282 memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
1283 memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
1284 priv->map = (struct rtl818x_csr *)0xFF00;
8318d78a
JB		 1285
1286 priv->band.band = IEEE80211_BAND_2GHZ;
1287 priv->band.channels = priv->channels;
1288 priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
1289 priv->band.bitrates = priv->rates;
1290 priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
1291 dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
1292
1293
05c914fe 1294 priv->mode = NL80211_IFTYPE_MONITOR;
605bebe2 1295 dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
0ccd58fc 1296 IEEE80211_HW_RX_INCLUDES_FCS;
605bebe2 1297
605bebe2
MW		 1298 eeprom.data = dev;
1299 eeprom.register_read = rtl8187_eeprom_register_read;
1300 eeprom.register_write = rtl8187_eeprom_register_write;
1301 if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
1302 eeprom.width = PCI_EEPROM_WIDTH_93C66;
1303 else
1304 eeprom.width = PCI_EEPROM_WIDTH_93C46;
1305
1306 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
1307 udelay(10);
1308
1309 eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
1310 (__le16 __force *)dev->wiphy->perm_addr, 3);
1311 if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
1312 printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
1313 "generated MAC address\n");
1314 random_ether_addr(dev->wiphy->perm_addr);
1315 }
1316
1317 channel = priv->channels;
1318 for (i = 0; i < 3; i++) {
1319 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
1320 &txpwr);
8318d78a
JB		 1321 (*channel++).hw_value = txpwr & 0xFF;
1322 (*channel++).hw_value = txpwr >> 8;
605bebe2
MW		 1323 }
1324 for (i = 0; i < 2; i++) {
1325 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
1326 &txpwr);
8318d78a
JB		 1327 (*channel++).hw_value = txpwr & 0xFF;
1328 (*channel++).hw_value = txpwr >> 8;
605bebe2 1329 }
605bebe2
MW		 1330
1331 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
1332 &priv->txpwr_base);
1333
f6532111
MW		 1334 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
1335 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
605bebe2
MW		 1336 /* 0 means asic B-cut, we should use SW 3 wire
1337 * bit-by-bit banging for radio. 1 means we can use
1338 * USB specific request to write radio registers */
1339 priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
f6532111 1340 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
605bebe2
MW		 1341 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1342
6f7853f3
HTL		 1343 if (!priv->is_rtl8187b) {
1344 u32 reg32;
1345 reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
1346 reg32 &= RTL818X_TX_CONF_HWVER_MASK;
1347 switch (reg32) {
0e25b4ef
LF		 1348 case RTL818X_TX_CONF_R8187vD_B:
1349 /* Some RTL8187B devices have a USB ID of 0x8187
1350 * detect them here */
1351 chip_name = "RTL8187BvB(early)";
1352 priv->is_rtl8187b = 1;
1353 priv->hw_rev = RTL8187BvB;
1354 break;
1355 case RTL818X_TX_CONF_R8187vD:
6f7853f3
HTL		 1356 chip_name = "RTL8187vD";
1357 break;
1358 default:
1359 chip_name = "RTL8187vB (default)";
1360 }
1361 } else {
6f7853f3
HTL		 1362 /*
1363 * Force USB request to write radio registers for 8187B, Realtek
1364 * only uses it in their sources
1365 */
1366 /*if (priv->asic_rev == 0) {
1367 printk(KERN_WARNING "rtl8187: Forcing use of USB "
1368 "requests to write to radio registers\n");
1369 priv->asic_rev = 1;
1370 }*/
1371 switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
1372 case RTL818X_R8187B_B:
1373 chip_name = "RTL8187BvB";
1374 priv->hw_rev = RTL8187BvB;
1375 break;
1376 case RTL818X_R8187B_D:
1377 chip_name = "RTL8187BvD";
1378 priv->hw_rev = RTL8187BvD;
1379 break;
1380 case RTL818X_R8187B_E:
1381 chip_name = "RTL8187BvE";
1382 priv->hw_rev = RTL8187BvE;
1383 break;
1384 default:
1385 chip_name = "RTL8187BvB (default)";
1386 priv->hw_rev = RTL8187BvB;
1387 }
1388 }
1389
0e25b4ef
LF		 1390 if (!priv->is_rtl8187b) {
1391 for (i = 0; i < 2; i++) {
1392 eeprom_93cx6_read(&eeprom,
1393 RTL8187_EEPROM_TXPWR_CHAN_6 + i,
1394 &txpwr);
1395 (*channel++).hw_value = txpwr & 0xFF;
1396 (*channel++).hw_value = txpwr >> 8;
1397 }
1398 } else {
1399 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
1400 &txpwr);
1401 (*channel++).hw_value = txpwr & 0xFF;
1402
1403 eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
1404 (*channel++).hw_value = txpwr & 0xFF;
1405
1406 eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
1407 (*channel++).hw_value = txpwr & 0xFF;
1408 (*channel++).hw_value = txpwr >> 8;
1409 }
1410
0ccd58fc 1411 if (priv->is_rtl8187b) {
c8f96974 1412 printk(KERN_WARNING "rtl8187: 8187B chip detected.\n");
0ccd58fc
LF		 1413 dev->flags |= IEEE80211_HW_SIGNAL_DBM;
1414 } else {
1415 dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
1416 dev->max_signal = 65;
1417 }
1418
94778280
JB		 1419 /*
1420 * XXX: Once this driver supports anything that requires
1421 * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
1422 */
f59ac048
LR		 1423 dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1424
0e25b4ef
LF		 1425 if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
1426 printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
1427 " info!\n");
1428
f6532111 1429 priv->rf = rtl8187_detect_rf(dev);
0e25b4ef
LF		 1430 dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
1431 sizeof(struct rtl8187_tx_hdr) :
1432 sizeof(struct rtl8187b_tx_hdr);
1433 if (!priv->is_rtl8187b)
1434 dev->queues = 1;
1435 else
1436 dev->queues = 4;
605bebe2
MW		 1437
1438 err = ieee80211_register_hw(dev);
1439 if (err) {
1440 printk(KERN_ERR "rtl8187: Cannot register device\n");
1441 goto err_free_dev;
1442 }
7dcdd073 1443 mutex_init(&priv->conf_mutex);
3517afde 1444 skb_queue_head_init(&priv->b_tx_status.queue);
605bebe2 1445
e174961c
JB		 1446 printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n",
1447 wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
6f7853f3 1448 chip_name, priv->asic_rev, priv->rf->name);
605bebe2
MW		 1449
1450 return 0;
1451
1452 err_free_dev:
1453 ieee80211_free_hw(dev);
1454 usb_set_intfdata(intf, NULL);
1455 usb_put_dev(udev);
1456 return err;
1457}
1458
1459static void __devexit rtl8187_disconnect(struct usb_interface *intf)
1460{
1461 struct ieee80211_hw *dev = usb_get_intfdata(intf);
1462 struct rtl8187_priv *priv;
1463
1464 if (!dev)
1465 return;
1466
1467 ieee80211_unregister_hw(dev);
1468
1469 priv = dev->priv;
1470 usb_put_dev(interface_to_usbdev(intf));
1471 ieee80211_free_hw(dev);
1472}
1473
1474static struct usb_driver rtl8187_driver = {
1475 .name = KBUILD_MODNAME,
1476 .id_table = rtl8187_table,
1477 .probe = rtl8187_probe,
500c1197 1478 .disconnect = __devexit_p(rtl8187_disconnect),
605bebe2
MW		 1479};
1480
1481static int __init rtl8187_init(void)
1482{
1483 return usb_register(&rtl8187_driver);
1484}
1485
1486static void __exit rtl8187_exit(void)
1487{
1488 usb_deregister(&rtl8187_driver);
1489}
1490
1491module_init(rtl8187_init);
1492module_exit(rtl8187_exit);
Clone of davem's net-next-2.6 tree