[net-next-2.6.git] / drivers / net / wireless / Kconfig

#
# Wireless LAN device configuration
#

menuconfig WLAN
	bool "Wireless LAN"
	depends on !S390
	depends on NET
	select WIRELESS
	default y
	---help---
	  This section contains all the pre 802.11 and 802.11 wireless
	  device drivers. For a complete list of drivers and documentation
	  on them refer to the wireless wiki:

	  http://wireless.kernel.org/en/users/Drivers

if WLAN

config PCMCIA_RAYCS
	tristate "Aviator/Raytheon 2.4GHz wireless support"
	depends on PCMCIA
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	---help---
	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	  (PC-card) wireless Ethernet networking card to your computer.
	  Please read the file <file:Documentation/networking/ray_cs.txt> for
	  details.

	  To compile this driver as a module, choose M here: the module will be
	  called ray_cs.  If unsure, say N.

config LIBERTAS_THINFIRM
	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
	depends on MAC80211
	select FW_LOADER
	---help---
	  A library for Marvell Libertas 8xxx devices using thinfirm.

config LIBERTAS_THINFIRM_DEBUG
	bool "Enable full debugging output in the Libertas thin firmware module."
	depends on LIBERTAS_THINFIRM
	---help---
	  Debugging support.

config LIBERTAS_THINFIRM_USB
	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	depends on LIBERTAS_THINFIRM && USB
	---help---
	  A driver for Marvell Libertas 8388 USB devices using thinfirm.

config AIRO
	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
	depends on ISA_DMA_API && (PCI || BROKEN)
	select WIRELESS_EXT
	select CRYPTO
	select WEXT_SPY
	select WEXT_PRIV
	---help---
	  This is the standard Linux driver to support Cisco/Aironet ISA and
	  PCI 802.11 wireless cards.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	  - with or without encryption) as well as card before the Cisco
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

	  This driver support both the standard Linux Wireless Extensions
	  and Cisco proprietary API, so both the Linux Wireless Tools and the
	  Cisco Linux utilities can be used to configure the card.

	  The driver can be compiled as a module and will be named "airo".

config ATMEL
      tristate "Atmel at76c50x chipset  802.11b support"
      depends on (PCI || PCMCIA)
      select WIRELESS_EXT
      select WEXT_PRIV
      select FW_LOADER
      select CRC32
       ---help---
        A driver 802.11b wireless cards based on the Atmel fast-vnet
        chips. This driver supports standard Linux wireless extensions.

        Many  cards based on this chipset do not have flash memory
        and need their firmware loaded at start-up. If yours is
        one of these, you will need to provide a firmware image
        to be loaded into the card by the driver. The Atmel
        firmware package can be downloaded from
        <http://www.thekelleys.org.uk/atmel>

config PCI_ATMEL
      tristate "Atmel at76c506 PCI cards"
      depends on ATMEL && PCI
       ---help---
        Enable support for PCI and mini-PCI cards containing the
        Atmel at76c506 chip.

config PCMCIA_ATMEL
	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	depends on ATMEL && PCMCIA
	select WIRELESS_EXT
	select FW_LOADER
	select CRC32
	---help---
	  Enable support for PCMCIA cards containing the
	  Atmel at76c502 and at76c504 chips.

config AT76C50X_USB
        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
        depends on MAC80211 && USB
        select FW_LOADER
        ---help---
          Enable support for USB Wireless devices using Atmel at76c503,
          at76c505 or at76c505a chips.

config AIRO_CS
	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
	depends on PCMCIA && (BROKEN || !M32R)
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	select CRYPTO
	select CRYPTO_AES
	---help---
	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
	  802.11 wireless cards.  This driver is the same as the Aironet
	  driver part of the Linux Pcmcia package.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	  - with or without encryption) as well as card before the Cisco
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	  802.11b cards.

	  This driver support both the standard Linux Wireless Extensions
	  and Cisco proprietary API, so both the Linux Wireless Tools and the
	  Cisco Linux utilities can be used to configure the card.

config PCMCIA_WL3501
	tristate "Planet WL3501 PCMCIA cards"
	depends on EXPERIMENTAL && PCMCIA
	select WIRELESS_EXT
	select WEXT_SPY
	help
	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	  It has basic support for Linux wireless extensions and initial
	  micro support for ethtool.

config PRISM54
	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
	depends on PCI && EXPERIMENTAL
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	select FW_LOADER
	---help---
	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
	  p54pci supports FullMAC PCI/Cardbus devices as well. For details on
	  the scheduled removal of this driver on the kernel see the feature
	  removal schedule:

	  Documentation/feature-removal-schedule.txt

	  For more information refer to the p54 wiki:

	  http://wireless.kernel.org/en/users/Drivers/p54

	  Note: You need a motherboard with DMA support to use any of these cards

	  When built as module you get the module prism54

config USB_ZD1201
	tristate "USB ZD1201 based Wireless device support"
	depends on USB
	select WIRELESS_EXT
	select WEXT_PRIV
	select FW_LOADER
	---help---
	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
	  ZD1201 chip.

	  This driver makes the adapter appear as a normal Ethernet interface,
	  typically on wlan0.

	  The zd1201 device requires external firmware to be loaded.
	  This can be found at http://linux-lc100020.sourceforge.net/

	  To compile this driver as a module, choose M here: the
	  module will be called zd1201.

config USB_NET_RNDIS_WLAN
	tristate "Wireless RNDIS USB support"
	depends on USB && EXPERIMENTAL
	depends on CFG80211
	select USB_USBNET
	select USB_NET_CDCETHER
	select USB_NET_RNDIS_HOST
	---help---
	  This is a driver for wireless RNDIS devices.
	  These are USB based adapters found in devices such as:

	  Buffalo WLI-U2-KG125S
	  U.S. Robotics USR5421
	  Belkin F5D7051
	  Linksys WUSB54GSv2
	  Linksys WUSB54GSC
	  Asus WL169gE
	  Eminent EM4045
	  BT Voyager 1055
	  Linksys WUSB54GSv1
	  U.S. Robotics USR5420
	  BUFFALO WLI-USB-G54

	  All of these devices are based on Broadcom 4320 chip which is the
	  only wireless RNDIS chip known to date.

	  If you choose to build a module, it'll be called rndis_wlan.

source "drivers/net/wireless/rtl818x/Kconfig"

config ADM8211
	tristate "ADMtek ADM8211 support"
	depends on MAC80211 && PCI && EXPERIMENTAL
	select CRC32
	select EEPROM_93CX6
	---help---
	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:

	  Xterasys Cardbus XN-2411b
	  Blitz NetWave Point PC
	  TrendNet 221pc
	  Belkin F5D6001
	  SMC 2635W
	  Linksys WPC11 v1
	  Fiberline FL-WL-200X
	  3com Office Connect (3CRSHPW796)
	  Corega WLPCIB-11
	  SMC 2602W V2 EU
	  D-Link DWL-520 Revision C

	  However, some of these cards have been replaced with other chips
	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	  the Ralink RT2400 (SMC2635W) without a model number change.

	  Thanks to Infineon-ADMtek for their support of this driver.

config MAC80211_HWSIM
	tristate "Simulated radio testing tool for mac80211"
	depends on MAC80211
	---help---
	  This driver is a developer testing tool that can be used to test
	  IEEE 802.11 networking stack (mac80211) functionality. This is not
	  needed for normal wireless LAN usage and is only for testing. See
	  Documentation/networking/mac80211_hwsim for more information on how
	  to use this tool.

	  To compile this driver as a module, choose M here: the module will be
	  called mac80211_hwsim.  If unsure, say N.

config MWL8K
	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
	depends on MAC80211 && PCI && EXPERIMENTAL
	---help---
	  This driver supports Marvell TOPDOG 802.11 wireless cards.

	  To compile this driver as a module, choose M here: the module
	  will be called mwl8k.  If unsure, say N.

source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/iwmc3200wifi/Kconfig"
source "drivers/net/wireless/libertas/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/wl1251/Kconfig"
source "drivers/net/wireless/wl12xx/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"

endif # WLAN
Commit	Line	Data
1da177e4 LT	1	#
	2	# Wireless LAN device configuration
	3	#
	4
44175272 LR	5	menuconfig WLAN
44175272 LR	6	bool "Wireless LAN"
f54bfc0e	7	depends on !S390
9459d59f	8	depends on NET
eab2ec83	9	select WIRELESS
ff4d572a	10	default y
44175272 LR	11	---help---
	12	This section contains all the pre 802.11 and 802.11 wireless
	13	device drivers. For a complete list of drivers and documentation
	14	on them refer to the wireless wiki:
	15
	16	http://wireless.kernel.org/en/users/Drivers
	17
	18	if WLAN
1da177e4	19
1da177e4	20	config PCMCIA_RAYCS
8476a657	21	tristate "Aviator/Raytheon 2.4GHz wireless support"
133d7c6a	22	depends on PCMCIA
2a5e1c0e	23	select WIRELESS_EXT
3d23e349 JB	24	select WEXT_SPY
3d23e349 JB	25	select WEXT_PRIV
1da177e4 LT	26	---help---
	27	Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	28	(PC-card) wireless Ethernet networking card to your computer.
	29	Please read the file <file:Documentation/networking/ray_cs.txt> for
	30	details.
	31
	32	To compile this driver as a module, choose M here: the module will be
	33	called ray_cs. If unsure, say N.
	34
d9c63504 LCC	35	config LIBERTAS_THINFIRM
d9c63504 LCC	36	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
133d7c6a	37	depends on MAC80211
d9c63504 LCC	38	select FW_LOADER
	39	---help---
	40	A library for Marvell Libertas 8xxx devices using thinfirm.
	41
e9bd5bcd S	42	config LIBERTAS_THINFIRM_DEBUG
	43	bool "Enable full debugging output in the Libertas thin firmware module."
	44	depends on LIBERTAS_THINFIRM
	45	---help---
	46	Debugging support.
	47
d9c63504 LCC	48	config LIBERTAS_THINFIRM_USB
	49	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	50	depends on LIBERTAS_THINFIRM && USB
	51	---help---
	52	A driver for Marvell Libertas 8388 USB devices using thinfirm.
	53
1da177e4 LT	54	config AIRO
1da177e4 LT	55	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
133d7c6a	56	depends on ISA_DMA_API && (PCI \|\| BROKEN)
2a5e1c0e	57	select WIRELESS_EXT
a39d3e79	58	select CRYPTO
3d23e349 JB	59	select WEXT_SPY
3d23e349 JB	60	select WEXT_PRIV
1da177e4 LT	61	---help---
	62	This is the standard Linux driver to support Cisco/Aironet ISA and
	63	PCI 802.11 wireless cards.
	64	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	65	- with or without encryption) as well as card before the Cisco
47c51431	66	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
1da177e4 LT	67
	68	This driver support both the standard Linux Wireless Extensions
	69	and Cisco proprietary API, so both the Linux Wireless Tools and the
	70	Cisco Linux utilities can be used to configure the card.
	71
	72	The driver can be compiled as a module and will be named "airo".
	73
e12dcb05 FL	74	config ATMEL
e12dcb05 FL	75	tristate "Atmel at76c50x chipset 802.11b support"
133d7c6a	76	depends on (PCI \|\| PCMCIA)
e12dcb05	77	select WIRELESS_EXT
3d23e349	78	select WEXT_PRIV
e12dcb05 FL	79	select FW_LOADER
	80	select CRC32
	81	---help---
	82	A driver 802.11b wireless cards based on the Atmel fast-vnet
	83	chips. This driver supports standard Linux wireless extensions.
	84
	85	Many cards based on this chipset do not have flash memory
	86	and need their firmware loaded at start-up. If yours is
	87	one of these, you will need to provide a firmware image
	88	to be loaded into the card by the driver. The Atmel
	89	firmware package can be downloaded from
	90	<http://www.thekelleys.org.uk/atmel>
	91
	92	config PCI_ATMEL
	93	tristate "Atmel at76c506 PCI cards"
	94	depends on ATMEL && PCI
	95	---help---
	96	Enable support for PCI and mini-PCI cards containing the
	97	Atmel at76c506 chip.
	98
	99	config PCMCIA_ATMEL
	100	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	101	depends on ATMEL && PCMCIA
	102	select WIRELESS_EXT
	103	select FW_LOADER
	104	select CRC32
	105	---help---
	106	Enable support for PCMCIA cards containing the
	107	Atmel at76c502 and at76c504 chips.
	108
1264b951 KV	109	config AT76C50X_USB
1264b951 KV	110	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
133d7c6a	111	depends on MAC80211 && USB
1264b951 KV	112	select FW_LOADER
	113	---help---
	114	Enable support for USB Wireless devices using Atmel at76c503,
	115	at76c505 or at76c505a chips.
	116
1da177e4 LT	117	config AIRO_CS
1da177e4 LT	118	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
133d7c6a	119	depends on PCMCIA && (BROKEN \|\| !M32R)
2a5e1c0e	120	select WIRELESS_EXT
75026664	121	select WEXT_SPY
2bf9fa69	122	select WEXT_PRIV
a39d3e79	123	select CRYPTO
8fa9ea18	124	select CRYPTO_AES
1da177e4 LT	125	---help---
	126	This is the standard Linux driver to support Cisco/Aironet PCMCIA
	127	802.11 wireless cards. This driver is the same as the Aironet
	128	driver part of the Linux Pcmcia package.
	129	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	130	- with or without encryption) as well as card before the Cisco
47c51431	131	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
1da177e4 LT	132	supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	133	802.11b cards.
	134
	135	This driver support both the standard Linux Wireless Extensions
	136	and Cisco proprietary API, so both the Linux Wireless Tools and the
	137	Cisco Linux utilities can be used to configure the card.
	138
1da177e4	139	config PCMCIA_WL3501
3d23e349	140	tristate "Planet WL3501 PCMCIA cards"
133d7c6a	141	depends on EXPERIMENTAL && PCMCIA
3d23e349 JB	142	select WIRELESS_EXT
	143	select WEXT_SPY
	144	help
	145	A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	146	It has basic support for Linux wireless extensions and initial
	147	micro support for ethtool.
1da177e4	148
1da177e4	149	config PRISM54
4d8cd268	150	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
133d7c6a	151	depends on PCI && EXPERIMENTAL
2a5e1c0e	152	select WIRELESS_EXT
3d23e349 JB	153	select WEXT_SPY
3d23e349 JB	154	select WEXT_PRIV
1da177e4 LT	155	select FW_LOADER
1da177e4 LT	156	---help---
4d8cd268 LR	157	This enables support for FullMAC PCI/Cardbus prism54 devices. This
	158	driver is now deprecated in favor for the SoftMAC driver, p54pci.
	159	p54pci supports FullMAC PCI/Cardbus devices as well. For details on
	160	the scheduled removal of this driver on the kernel see the feature
	161	removal schedule:
	162
	163	Documentation/feature-removal-schedule.txt
	164
	165	For more information refer to the p54 wiki:
	166
	167	http://wireless.kernel.org/en/users/Drivers/p54
	168
	169	Note: You need a motherboard with DMA support to use any of these cards
	170
	171	When built as module you get the module prism54
1da177e4	172
5c601d0c PM	173	config USB_ZD1201
5c601d0c PM	174	tristate "USB ZD1201 based Wireless device support"
133d7c6a	175	depends on USB
2a5e1c0e	176	select WIRELESS_EXT
3d23e349	177	select WEXT_PRIV
5c601d0c PM	178	select FW_LOADER
	179	---help---
	180	Say Y if you want to use wireless LAN adapters based on the ZyDAS
	181	ZD1201 chip.
	182
	183	This driver makes the adapter appear as a normal Ethernet interface,
	184	typically on wlan0.
	185
	186	The zd1201 device requires external firmware to be loaded.
	187	This can be found at http://linux-lc100020.sourceforge.net/
	188
	189	To compile this driver as a module, choose M here: the
	190	module will be called zd1201.
	191
bf164cc0 JK	192	config USB_NET_RNDIS_WLAN
bf164cc0 JK	193	tristate "Wireless RNDIS USB support"
133d7c6a	194	depends on USB && EXPERIMENTAL
0aa8204b	195	depends on CFG80211
bf164cc0 JK	196	select USB_USBNET
	197	select USB_NET_CDCETHER
	198	select USB_NET_RNDIS_HOST
bf164cc0 JK	199	---help---
	200	This is a driver for wireless RNDIS devices.
	201	These are USB based adapters found in devices such as:
	202
	203	Buffalo WLI-U2-KG125S
	204	U.S. Robotics USR5421
	205	Belkin F5D7051
	206	Linksys WUSB54GSv2
	207	Linksys WUSB54GSC
	208	Asus WL169gE
	209	Eminent EM4045
	210	BT Voyager 1055
	211	Linksys WUSB54GSv1
	212	U.S. Robotics USR5420
	213	BUFFALO WLI-USB-G54
	214
	215	All of these devices are based on Broadcom 4320 chip which is the
	216	only wireless RNDIS chip known to date.
	217
	218	If you choose to build a module, it'll be called rndis_wlan.
	219
edbe056a	220	source "drivers/net/wireless/rtl818x/Kconfig"
a027087a	221
cc0b88cf MW	222	config ADM8211
cc0b88cf MW	223	tristate "ADMtek ADM8211 support"
133d7c6a	224	depends on MAC80211 && PCI && EXPERIMENTAL
cc0b88cf MW	225	select CRC32
	226	select EEPROM_93CX6
	227	---help---
	228	This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	229	These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
	230
	231	Xterasys Cardbus XN-2411b
	232	Blitz NetWave Point PC
	233	TrendNet 221pc
	234	Belkin F5D6001
	235	SMC 2635W
	236	Linksys WPC11 v1
	237	Fiberline FL-WL-200X
	238	3com Office Connect (3CRSHPW796)
	239	Corega WLPCIB-11
	240	SMC 2602W V2 EU
	241	D-Link DWL-520 Revision C
	242
	243	However, some of these cards have been replaced with other chips
	244	like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	245	the Ralink RT2400 (SMC2635W) without a model number change.
	246
	247	Thanks to Infineon-ADMtek for their support of this driver.
	248
acc1e7a3 JM	249	config MAC80211_HWSIM
acc1e7a3 JM	250	tristate "Simulated radio testing tool for mac80211"
133d7c6a	251	depends on MAC80211
acc1e7a3 JM	252	---help---
	253	This driver is a developer testing tool that can be used to test
	254	IEEE 802.11 networking stack (mac80211) functionality. This is not
	255	needed for normal wireless LAN usage and is only for testing. See
	256	Documentation/networking/mac80211_hwsim for more information on how
	257	to use this tool.
	258
	259	To compile this driver as a module, choose M here: the module will be
	260	called mac80211_hwsim. If unsure, say N.
	261
a66098da LB	262	config MWL8K
a66098da LB	263	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
133d7c6a	264	depends on MAC80211 && PCI && EXPERIMENTAL
a66098da LB	265	---help---
	266	This driver supports Marvell TOPDOG 802.11 wireless cards.
	267
	268	To compile this driver as a module, choose M here: the module
	269	will be called mwl8k. If unsure, say N.
	270
3a702e49	271	source "drivers/net/wireless/ath/Kconfig"
e4d6b795	272	source "drivers/net/wireless/b43/Kconfig"
75388acd	273	source "drivers/net/wireless/b43legacy/Kconfig"
0465af8e HS	274	source "drivers/net/wireless/hostap/Kconfig"
	275	source "drivers/net/wireless/ipw2x00/Kconfig"
	276	source "drivers/net/wireless/iwlwifi/Kconfig"
	277	source "drivers/net/wireless/iwmc3200wifi/Kconfig"
	278	source "drivers/net/wireless/libertas/Kconfig"
49c1d208	279	source "drivers/net/wireless/orinoco/Kconfig"
0465af8e HS	280	source "drivers/net/wireless/p54/Kconfig"
0465af8e HS	281	source "drivers/net/wireless/rt2x00/Kconfig"
9bc6772e	282	source "drivers/net/wireless/wl1251/Kconfig"
2f01a1f5	283	source "drivers/net/wireless/wl12xx/Kconfig"
0465af8e	284	source "drivers/net/wireless/zd1211rw/Kconfig"
70e5e983	285
44175272	286	endif # WLAN