[net-next-2.6.git] / drivers / net / wireless / Kconfig

#
# Wireless LAN device configuration
#

menu "Wireless LAN"
	depends on !S390

config WLAN_PRE80211
	bool "Wireless LAN (pre-802.11)"
	depends on NETDEVICES
	---help---
	  Say Y if you have any pre-802.11 wireless LAN hardware.

	  This option does not affect the kernel build, it only
	  lets you choose drivers.

config STRIP
	tristate "STRIP (Metricom starmode radio IP)"
	depends on INET && WLAN_PRE80211
	select WIRELESS_EXT
	---help---
	  Say Y if you have a Metricom radio and intend to use Starmode Radio
	  IP. STRIP is a radio protocol developed for the MosquitoNet project
	  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
	  traffic using Metricom radios.  Metricom radios are small, battery
	  powered, 100kbit/sec packet radio transceivers, about the size and
	  weight of a cellular telephone. (You may also have heard them called
	  "Metricom modems" but we avoid the term "modem" because it misleads
	  many people into thinking that you can plug a Metricom modem into a
	  phone line and use it as a modem.)

	  You can use STRIP on any Linux machine with a serial port, although
	  it is obviously most useful for people with laptop computers. If you
	  think you might get a Metricom radio in the future, there is no harm
	  in saying Y to STRIP now, except that it makes the kernel a bit
	  bigger.

	  To compile this as a module, choose M here: the module will be
	  called strip.

config ARLAN
	tristate "Aironet Arlan 655 & IC2200 DS support"
	depends on ISA && !64BIT && WLAN_PRE80211
	select WIRELESS_EXT
	---help---
	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
	  www.Telxon.com chip, which is also used on several similar cards.
	  This driver is tested on the 655 and IC2200 series cards. Look at
	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.

	  The driver is built as two modules, arlan and arlan-proc. The latter
	  is the /proc interface and is not needed most of time.

	  On some computers the card ends up in non-valid state after some
	  time. Use a ping-reset script to clear it.

config WAVELAN
	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
	depends on ISA && WLAN_PRE80211
	select WIRELESS_EXT
	---help---
	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
	  radio frequencies 900 MHz and 2.4 GHz.

	  If you want to use an ISA WaveLAN card under Linux, say Y and read
	  the Ethernet-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>. Some more specific
	  information is contained in
	  <file:Documentation/networking/wavelan.txt> and in the source code
	  <file:drivers/net/wireless/wavelan.p.h>.

	  You will also need the wireless tools package available from
	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
	  Please read the man pages contained therein.

	  To compile this driver as a module, choose M here: the module will be
	  called wavelan.

config PCMCIA_WAVELAN
	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
	depends on PCMCIA && WLAN_PRE80211
	select WIRELESS_EXT
	help
	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
	  (PC-card) wireless Ethernet networking card to your computer.  This
	  driver is for the non-IEEE-802.11 Wavelan cards.

	  To compile this driver as a module, choose M here: the module will be
	  called wavelan_cs.  If unsure, say N.

config PCMCIA_NETWAVE
	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
	depends on PCMCIA && WLAN_PRE80211
	select WIRELESS_EXT
	help
	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
	  wireless Ethernet networking card to your computer.

	  To compile this driver as a module, choose M here: the module will be
	  called netwave_cs.  If unsure, say N.


config WLAN_80211
	bool "Wireless LAN (IEEE 802.11)"
	depends on NETDEVICES
	---help---
	  Say Y if you have any 802.11 wireless LAN hardware.

	  This option does not affect the kernel build, it only
	  lets you choose drivers.

config PCMCIA_RAYCS
	tristate "Aviator/Raytheon 2.4GHz wireless support"
	depends on PCMCIA && WLAN_80211
	select WIRELESS_EXT
	---help---
	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	  (PC-card) wireless Ethernet networking card to your computer.
	  Please read the file <file:Documentation/networking/ray_cs.txt> for
	  details.

	  To compile this driver as a module, choose M here: the module will be
	  called ray_cs.  If unsure, say N.

config LIBERTAS
	tristate "Marvell 8xxx Libertas WLAN driver support"
	depends on WLAN_80211
	select WIRELESS_EXT
	select LIB80211
	select FW_LOADER
	---help---
	  A library for Marvell Libertas 8xxx devices.

config LIBERTAS_USB
	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
	depends on LIBERTAS && USB
	---help---
	  A driver for Marvell Libertas 8388 USB devices.

config LIBERTAS_CS
	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
	depends on LIBERTAS && PCMCIA
	select FW_LOADER
	---help---
	  A driver for Marvell Libertas 8385 CompactFlash devices.

config LIBERTAS_SDIO
	tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
	depends on LIBERTAS && MMC
	---help---
	  A driver for Marvell Libertas 8385 and 8686 SDIO devices.

config LIBERTAS_SPI
	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
	depends on LIBERTAS && SPI && GENERIC_GPIO
	---help---
	  A driver for Marvell Libertas 8686 SPI devices.

config LIBERTAS_DEBUG
	bool "Enable full debugging output in the Libertas module."
	depends on LIBERTAS
	---help---
	  Debugging support.

config LIBERTAS_THINFIRM
	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
	depends on WLAN_80211 && MAC80211
	select FW_LOADER
	---help---
	  A library for Marvell Libertas 8xxx devices using thinfirm.

config LIBERTAS_THINFIRM_USB
	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	depends on LIBERTAS_THINFIRM && USB
	---help---
	  A driver for Marvell Libertas 8388 USB devices using thinfirm.

config AIRO
	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
	depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
	select WIRELESS_EXT
	select CRYPTO
	---help---
	  This is the standard Linux driver to support Cisco/Aironet ISA and
	  PCI 802.11 wireless cards.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	  - with or without encryption) as well as card before the Cisco
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

	  This driver support both the standard Linux Wireless Extensions
	  and Cisco proprietary API, so both the Linux Wireless Tools and the
	  Cisco Linux utilities can be used to configure the card.

	  The driver can be compiled as a module and will be named "airo".

config ATMEL
      tristate "Atmel at76c50x chipset  802.11b support"
      depends on (PCI || PCMCIA) && WLAN_80211
      select WIRELESS_EXT
      select FW_LOADER
      select CRC32
       ---help---
        A driver 802.11b wireless cards based on the Atmel fast-vnet
        chips. This driver supports standard Linux wireless extensions.

        Many  cards based on this chipset do not have flash memory
        and need their firmware loaded at start-up. If yours is
        one of these, you will need to provide a firmware image
        to be loaded into the card by the driver. The Atmel
        firmware package can be downloaded from
        <http://www.thekelleys.org.uk/atmel>

config PCI_ATMEL
      tristate "Atmel at76c506 PCI cards"
      depends on ATMEL && PCI
       ---help---
        Enable support for PCI and mini-PCI cards containing the
        Atmel at76c506 chip.

config PCMCIA_ATMEL
	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	depends on ATMEL && PCMCIA
	select WIRELESS_EXT
	select FW_LOADER
	select CRC32
	---help---
	  Enable support for PCMCIA cards containing the
	  Atmel at76c502 and at76c504 chips.

config AT76C50X_USB
        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
        depends on MAC80211 && WLAN_80211 && USB
        select FW_LOADER
        ---help---
          Enable support for USB Wireless devices using Atmel at76c503,
          at76c505 or at76c505a chips.

config AIRO_CS
	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
	depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
	select WIRELESS_EXT
	select CRYPTO
	select CRYPTO_AES
	---help---
	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
	  802.11 wireless cards.  This driver is the same as the Aironet
	  driver part of the Linux Pcmcia package.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	  - with or without encryption) as well as card before the Cisco
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	  802.11b cards.

	  This driver support both the standard Linux Wireless Extensions
	  and Cisco proprietary API, so both the Linux Wireless Tools and the
	  Cisco Linux utilities can be used to configure the card.

config PCMCIA_WL3501
      tristate "Planet WL3501 PCMCIA cards"
      depends on EXPERIMENTAL && PCMCIA && WLAN_80211
      select WIRELESS_EXT
       ---help---
         A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	 It has basic support for Linux wireless extensions and initial
	 micro support for ethtool.

config PRISM54
	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' 
	depends on PCI && EXPERIMENTAL && WLAN_80211
	select WIRELESS_EXT
	select FW_LOADER
	---help---
	  Enable PCI and Cardbus support for the following chipset based cards:

	  ISL3880 - Prism GT            802.11 b/g
	  ISL3877 - Prism Indigo        802.11 a
	  ISL3890 - Prism Duette        802.11 a/b/g
	  
	  For a complete list of supported cards visit <http://prism54.org>.
	  Here is the latest confirmed list of supported cards:

	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
	  Allnet ALL0271 PCI Card
	  Compex WL54G Cardbus Card
	  Corega CG-WLCB54GT Cardbus Card
	  D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
	  I-O Data WN-G54/CB Cardbus Card
	  Kobishi XG-300 aka Z-Com Cardbus Card
	  Netgear WG511 Cardbus Card
	  Ovislink WL-5400PCI PCI Card
	  Peabird WLG-PCI PCI Card
	  Sitecom WL-100i Cardbus Card
	  Sitecom WL-110i PCI Card
	  SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
	  SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	  SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	  Z-Com XG-900 PCI Card
	  Zyxel G-100 Cardbus Card

	  If you enable this you will need a firmware file as well.
	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
	  You can get this non-GPL'd firmware file from the Prism54 project page:
	  <http://prism54.org>
	  You will also need the /etc/hotplug/firmware.agent script from
	  a current hotplug package.

	  Note: You need a motherboard with DMA support to use any of these cards 
	  
	  If you want to compile the driver as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want),
	  say M here and read <file:Documentation/kbuild/modules.txt>.
	  The module will be called prism54.ko.

config USB_ZD1201
	tristate "USB ZD1201 based Wireless device support"
	depends on USB && WLAN_80211
	select WIRELESS_EXT
	select FW_LOADER
	---help---
	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
	  ZD1201 chip.

	  This driver makes the adapter appear as a normal Ethernet interface,
	  typically on wlan0.

	  The zd1201 device requires external firmware to be loaded.
	  This can be found at http://linux-lc100020.sourceforge.net/

	  To compile this driver as a module, choose M here: the
	  module will be called zd1201.

config USB_NET_RNDIS_WLAN
	tristate "Wireless RNDIS USB support"
	depends on USB && WLAN_80211 && EXPERIMENTAL
	select USB_USBNET
	select USB_NET_CDCETHER
	select USB_NET_RNDIS_HOST
	select WIRELESS_EXT
	---help---
	  This is a driver for wireless RNDIS devices.
	  These are USB based adapters found in devices such as:

	  Buffalo WLI-U2-KG125S
	  U.S. Robotics USR5421
	  Belkin F5D7051
	  Linksys WUSB54GSv2
	  Linksys WUSB54GSC
	  Asus WL169gE
	  Eminent EM4045
	  BT Voyager 1055
	  Linksys WUSB54GSv1
	  U.S. Robotics USR5420
	  BUFFALO WLI-USB-G54

	  All of these devices are based on Broadcom 4320 chip which is the
	  only wireless RNDIS chip known to date.

	  If you choose to build a module, it'll be called rndis_wlan.

config RTL8180
	tristate "Realtek 8180/8185 PCI support"
	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	select EEPROM_93CX6
	---help---
	  This is a driver for RTL8180 and RTL8185 based cards.
	  These are PCI based chips found in cards such as:

	  (RTL8185 802.11g)
	  A-Link WL54PC

	  (RTL8180 802.11b)
	  Belkin F5D6020 v3
	  Belkin F5D6020 v3
	  Dlink DWL-610
	  Dlink DWL-510
	  Netgear MA521
	  Level-One WPC-0101
	  Acer Aspire 1357 LMi
	  VCTnet PC-11B1
	  Ovislink AirLive WL-1120PCM
	  Mentor WL-PCI
	  Linksys WPC11 v4
	  TrendNET TEW-288PI
	  D-Link DWL-520 Rev D
	  Repotec RP-WP7126
	  TP-Link TL-WN250/251
	  Zonet ZEW1000
	  Longshine LCS-8031-R
	  HomeLine HLW-PCC200
	  GigaFast WF721-AEX
	  Planet WL-3553
	  Encore ENLWI-PCI1-NT
	  TrendNET TEW-266PC
	  Gigabyte GN-WLMR101
	  Siemens-fujitsu Amilo D1840W
	  Edimax EW-7126
	  PheeNet WL-11PCIR
	  Tonze PC-2100T
	  Planet WL-8303
	  Dlink DWL-650 v M1
	  Edimax EW-7106
	  Q-Tec 770WC
	  Topcom Skyr@cer 4011b
	  Roper FreeLan 802.11b (edition 2004)
	  Wistron Neweb Corp CB-200B
	  Pentagram HorNET
	  QTec 775WC
	  TwinMOS Booming B Series
	  Micronet SP906BB
	  Sweex LC700010
	  Surecom EP-9428
	  Safecom SWLCR-1100

	  Thanks to Realtek for their support!

config RTL8187
	tristate "Realtek 8187 and 8187B USB support"
	depends on MAC80211 && USB && WLAN_80211
	select EEPROM_93CX6
	---help---
	  This is a driver for RTL8187 and RTL8187B based cards.
	  These are USB based chips found in devices such as:

	  Netgear WG111v2
	  Level 1 WNC-0301USB
	  Micronet SP907GK V5
	  Encore ENUWI-G2
	  Trendnet TEW-424UB
	  ASUS P5B Deluxe
	  Toshiba Satellite Pro series of laptops
	  Asus Wireless Link

	  Thanks to Realtek for their support!

config ADM8211
	tristate "ADMtek ADM8211 support"
	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	select CRC32
	select EEPROM_93CX6
	---help---
	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:

	  Xterasys Cardbus XN-2411b
	  Blitz NetWave Point PC
	  TrendNet 221pc
	  Belkin F5D6001
	  SMC 2635W
	  Linksys WPC11 v1
	  Fiberline FL-WL-200X
	  3com Office Connect (3CRSHPW796)
	  Corega WLPCIB-11
	  SMC 2602W V2 EU
	  D-Link DWL-520 Revision C

	  However, some of these cards have been replaced with other chips
	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	  the Ralink RT2400 (SMC2635W) without a model number change.

	  Thanks to Infineon-ADMtek for their support of this driver.

config MAC80211_HWSIM
	tristate "Simulated radio testing tool for mac80211"
	depends on MAC80211 && WLAN_80211
	---help---
	  This driver is a developer testing tool that can be used to test
	  IEEE 802.11 networking stack (mac80211) functionality. This is not
	  needed for normal wireless LAN usage and is only for testing. See
	  Documentation/networking/mac80211_hwsim for more information on how
	  to use this tool.

	  To compile this driver as a module, choose M here: the module will be
	  called mac80211_hwsim.  If unsure, say N.

config MWL8K
	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	---help---
	  This driver supports Marvell TOPDOG 802.11 wireless cards.

	  To compile this driver as a module, choose M here: the module
	  will be called mwl8k.  If unsure, say N.

source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/ath5k/Kconfig"
source "drivers/net/wireless/ath9k/Kconfig"
source "drivers/net/wireless/ar9170/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"

endmenu
Commit	Line	Data
1da177e4 LT	1	#
	2	# Wireless LAN device configuration
	3	#
	4
2a5e1c0e	5	menu "Wireless LAN"
f54bfc0e	6	depends on !S390
1da177e4	7
2a5e1c0e JB	8	config WLAN_PRE80211
	9	bool "Wireless LAN (pre-802.11)"
	10	depends on NETDEVICES
711e2c33	11	---help---
2a5e1c0e	12	Say Y if you have any pre-802.11 wireless LAN hardware.
711e2c33	13
2a5e1c0e	14	This option does not affect the kernel build, it only
42431592	15	lets you choose drivers.
1da177e4	16
a60f28fa DM	17	config STRIP
	18	tristate "STRIP (Metricom starmode radio IP)"
	19	depends on INET && WLAN_PRE80211
	20	select WIRELESS_EXT
	21	---help---
	22	Say Y if you have a Metricom radio and intend to use Starmode Radio
	23	IP. STRIP is a radio protocol developed for the MosquitoNet project
	24	(on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
	25	traffic using Metricom radios. Metricom radios are small, battery
	26	powered, 100kbit/sec packet radio transceivers, about the size and
	27	weight of a cellular telephone. (You may also have heard them called
	28	"Metricom modems" but we avoid the term "modem" because it misleads
	29	many people into thinking that you can plug a Metricom modem into a
	30	phone line and use it as a modem.)
	31
	32	You can use STRIP on any Linux machine with a serial port, although
	33	it is obviously most useful for people with laptop computers. If you
	34	think you might get a Metricom radio in the future, there is no harm
	35	in saying Y to STRIP now, except that it makes the kernel a bit
	36	bigger.
	37
	38	To compile this as a module, choose M here: the module will be
	39	called strip.
	40
1da177e4 LT	41	config ARLAN
1da177e4 LT	42	tristate "Aironet Arlan 655 & IC2200 DS support"
2a5e1c0e JB	43	depends on ISA && !64BIT && WLAN_PRE80211
2a5e1c0e JB	44	select WIRELESS_EXT
1da177e4 LT	45	---help---
	46	Aironet makes Arlan, a class of wireless LAN adapters. These use the
	47	www.Telxon.com chip, which is also used on several similar cards.
	48	This driver is tested on the 655 and IC2200 series cards. Look at
	49	<http://www.ylenurme.ee/~elmer/655/> for the latest information.
	50
	51	The driver is built as two modules, arlan and arlan-proc. The latter
	52	is the /proc interface and is not needed most of time.
	53
	54	On some computers the card ends up in non-valid state after some
	55	time. Use a ping-reset script to clear it.
	56
	57	config WAVELAN
	58	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
2a5e1c0e JB	59	depends on ISA && WLAN_PRE80211
2a5e1c0e JB	60	select WIRELESS_EXT
1da177e4 LT	61	---help---
	62	The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
	63	a Radio LAN (wireless Ethernet-like Local Area Network) using the
	64	radio frequencies 900 MHz and 2.4 GHz.
	65
1da177e4 LT	66	If you want to use an ISA WaveLAN card under Linux, say Y and read
	67	the Ethernet-HOWTO, available from
	68	<http://www.tldp.org/docs.html#howto>. Some more specific
	69	information is contained in
	70	<file:Documentation/networking/wavelan.txt> and in the source code
889c94a1	71	<file:drivers/net/wireless/wavelan.p.h>.
1da177e4 LT	72
	73	You will also need the wireless tools package available from
	74	<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
	75	Please read the man pages contained therein.
	76
	77	To compile this driver as a module, choose M here: the module will be
	78	called wavelan.
	79
	80	config PCMCIA_WAVELAN
	81	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
2a5e1c0e JB	82	depends on PCMCIA && WLAN_PRE80211
2a5e1c0e JB	83	select WIRELESS_EXT
1da177e4 LT	84	help
	85	Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
	86	(PC-card) wireless Ethernet networking card to your computer. This
	87	driver is for the non-IEEE-802.11 Wavelan cards.
	88
	89	To compile this driver as a module, choose M here: the module will be
	90	called wavelan_cs. If unsure, say N.
	91
	92	config PCMCIA_NETWAVE
	93	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
2a5e1c0e JB	94	depends on PCMCIA && WLAN_PRE80211
2a5e1c0e JB	95	select WIRELESS_EXT
1da177e4 LT	96	help
	97	Say Y here if you intend to attach this type of PCMCIA (PC-card)
	98	wireless Ethernet networking card to your computer.
	99
	100	To compile this driver as a module, choose M here: the module will be
	101	called netwave_cs. If unsure, say N.
	102
2a5e1c0e JB	103
	104	config WLAN_80211
	105	bool "Wireless LAN (IEEE 802.11)"
	106	depends on NETDEVICES
	107	---help---
	108	Say Y if you have any 802.11 wireless LAN hardware.
	109
	110	This option does not affect the kernel build, it only
42431592	111	lets you choose drivers.
1da177e4 LT	112
1da177e4 LT	113	config PCMCIA_RAYCS
8476a657	114	tristate "Aviator/Raytheon 2.4GHz wireless support"
2a5e1c0e JB	115	depends on PCMCIA && WLAN_80211
2a5e1c0e JB	116	select WIRELESS_EXT
1da177e4 LT	117	---help---
	118	Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	119	(PC-card) wireless Ethernet networking card to your computer.
	120	Please read the file <file:Documentation/networking/ray_cs.txt> for
	121	details.
	122
	123	To compile this driver as a module, choose M here: the module will be
	124	called ray_cs. If unsure, say N.
	125
084708b6 HS	126	config LIBERTAS
	127	tristate "Marvell 8xxx Libertas WLAN driver support"
	128	depends on WLAN_80211
aaf44a06	129	select WIRELESS_EXT
7e272fcf	130	select LIB80211
876c9d3a	131	select FW_LOADER
084708b6 HS	132	---help---
	133	A library for Marvell Libertas 8xxx devices.
	134
	135	config LIBERTAS_USB
	136	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
	137	depends on LIBERTAS && USB
876c9d3a MT	138	---help---
	139	A driver for Marvell Libertas 8388 USB devices.
	140
27590d06 HS	141	config LIBERTAS_CS
27590d06 HS	142	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
7d579611	143	depends on LIBERTAS && PCMCIA
27590d06 HS	144	select FW_LOADER
	145	---help---
	146	A driver for Marvell Libertas 8385 CompactFlash devices.
	147
727c26ed PO	148	config LIBERTAS_SDIO
	149	tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
	150	depends on LIBERTAS && MMC
	151	---help---
	152	A driver for Marvell Libertas 8385 and 8686 SDIO devices.
	153
d2b21f19 CM	154	config LIBERTAS_SPI
	155	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
	156	depends on LIBERTAS && SPI && GENERIC_GPIO
	157	---help---
	158	A driver for Marvell Libertas 8686 SPI devices.
	159
084708b6 HS	160	config LIBERTAS_DEBUG
	161	bool "Enable full debugging output in the Libertas module."
	162	depends on LIBERTAS
876c9d3a MT	163	---help---
	164	Debugging support.
	165
d9c63504 LCC	166	config LIBERTAS_THINFIRM
	167	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
	168	depends on WLAN_80211 && MAC80211
	169	select FW_LOADER
	170	---help---
	171	A library for Marvell Libertas 8xxx devices using thinfirm.
	172
	173	config LIBERTAS_THINFIRM_USB
	174	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	175	depends on LIBERTAS_THINFIRM && USB
	176	---help---
	177	A driver for Marvell Libertas 8388 USB devices using thinfirm.
	178
1da177e4 LT	179	config AIRO
1da177e4 LT	180	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
2a5e1c0e JB	181	depends on ISA_DMA_API && WLAN_80211 && (PCI \|\| BROKEN)
2a5e1c0e JB	182	select WIRELESS_EXT
a39d3e79	183	select CRYPTO
1da177e4 LT	184	---help---
	185	This is the standard Linux driver to support Cisco/Aironet ISA and
	186	PCI 802.11 wireless cards.
	187	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	188	- with or without encryption) as well as card before the Cisco
47c51431	189	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
1da177e4 LT	190
	191	This driver support both the standard Linux Wireless Extensions
	192	and Cisco proprietary API, so both the Linux Wireless Tools and the
	193	Cisco Linux utilities can be used to configure the card.
	194
	195	The driver can be compiled as a module and will be named "airo".
	196
e12dcb05 FL	197	config ATMEL
	198	tristate "Atmel at76c50x chipset 802.11b support"
	199	depends on (PCI \|\| PCMCIA) && WLAN_80211
	200	select WIRELESS_EXT
	201	select FW_LOADER
	202	select CRC32
	203	---help---
	204	A driver 802.11b wireless cards based on the Atmel fast-vnet
	205	chips. This driver supports standard Linux wireless extensions.
	206
	207	Many cards based on this chipset do not have flash memory
	208	and need their firmware loaded at start-up. If yours is
	209	one of these, you will need to provide a firmware image
	210	to be loaded into the card by the driver. The Atmel
	211	firmware package can be downloaded from
	212	<http://www.thekelleys.org.uk/atmel>
	213
	214	config PCI_ATMEL
	215	tristate "Atmel at76c506 PCI cards"
	216	depends on ATMEL && PCI
	217	---help---
	218	Enable support for PCI and mini-PCI cards containing the
	219	Atmel at76c506 chip.
	220
	221	config PCMCIA_ATMEL
	222	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	223	depends on ATMEL && PCMCIA
	224	select WIRELESS_EXT
	225	select FW_LOADER
	226	select CRC32
	227	---help---
	228	Enable support for PCMCIA cards containing the
	229	Atmel at76c502 and at76c504 chips.
	230
1264b951 KV	231	config AT76C50X_USB
	232	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
	233	depends on MAC80211 && WLAN_80211 && USB
	234	select FW_LOADER
	235	---help---
	236	Enable support for USB Wireless devices using Atmel at76c503,
	237	at76c505 or at76c505a chips.
	238
1da177e4 LT	239	config AIRO_CS
1da177e4 LT	240	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
2a5e1c0e JB	241	depends on PCMCIA && (BROKEN \|\| !M32R) && WLAN_80211
2a5e1c0e JB	242	select WIRELESS_EXT
a39d3e79	243	select CRYPTO
8fa9ea18	244	select CRYPTO_AES
1da177e4 LT	245	---help---
	246	This is the standard Linux driver to support Cisco/Aironet PCMCIA
	247	802.11 wireless cards. This driver is the same as the Aironet
	248	driver part of the Linux Pcmcia package.
	249	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	250	- with or without encryption) as well as card before the Cisco
47c51431	251	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
1da177e4 LT	252	supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	253	802.11b cards.
	254
	255	This driver support both the standard Linux Wireless Extensions
	256	and Cisco proprietary API, so both the Linux Wireless Tools and the
	257	Cisco Linux utilities can be used to configure the card.
	258
1da177e4 LT	259	config PCMCIA_WL3501
1da177e4 LT	260	tristate "Planet WL3501 PCMCIA cards"
2a5e1c0e JB	261	depends on EXPERIMENTAL && PCMCIA && WLAN_80211
2a5e1c0e JB	262	select WIRELESS_EXT
1da177e4 LT	263	---help---
	264	A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	265	It has basic support for Linux wireless extensions and initial
	266	micro support for ethtool.
	267
1da177e4 LT	268	config PRISM54
1da177e4 LT	269	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
2a5e1c0e JB	270	depends on PCI && EXPERIMENTAL && WLAN_80211
2a5e1c0e JB	271	select WIRELESS_EXT
1da177e4 LT	272	select FW_LOADER
	273	---help---
	274	Enable PCI and Cardbus support for the following chipset based cards:
	275
	276	ISL3880 - Prism GT 802.11 b/g
	277	ISL3877 - Prism Indigo 802.11 a
	278	ISL3890 - Prism Duette 802.11 a/b/g
	279
	280	For a complete list of supported cards visit <http://prism54.org>.
	281	Here is the latest confirmed list of supported cards:
	282
c8920ba0	283	3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
1da177e4 LT	284	Allnet ALL0271 PCI Card
	285	Compex WL54G Cardbus Card
	286	Corega CG-WLCB54GT Cardbus Card
	287	D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
	288	I-O Data WN-G54/CB Cardbus Card
	289	Kobishi XG-300 aka Z-Com Cardbus Card
	290	Netgear WG511 Cardbus Card
	291	Ovislink WL-5400PCI PCI Card
	292	Peabird WLG-PCI PCI Card
	293	Sitecom WL-100i Cardbus Card
	294	Sitecom WL-110i PCI Card
	295	SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
	296	SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	297	SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	298	Z-Com XG-900 PCI Card
	299	Zyxel G-100 Cardbus Card
	300
	301	If you enable this you will need a firmware file as well.
	302	You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
	303	You can get this non-GPL'd firmware file from the Prism54 project page:
	304	<http://prism54.org>
	305	You will also need the /etc/hotplug/firmware.agent script from
	306	a current hotplug package.
	307
	308	Note: You need a motherboard with DMA support to use any of these cards
	309
	310	If you want to compile the driver as a module ( = code which can be
	311	inserted in and removed from the running kernel whenever you want),
39f5fb30 AP	312	say M here and read <file:Documentation/kbuild/modules.txt>.
39f5fb30 AP	313	The module will be called prism54.ko.
1da177e4	314
5c601d0c PM	315	config USB_ZD1201
5c601d0c PM	316	tristate "USB ZD1201 based Wireless device support"
2a5e1c0e JB	317	depends on USB && WLAN_80211
2a5e1c0e JB	318	select WIRELESS_EXT
5c601d0c PM	319	select FW_LOADER
	320	---help---
	321	Say Y if you want to use wireless LAN adapters based on the ZyDAS
	322	ZD1201 chip.
	323
	324	This driver makes the adapter appear as a normal Ethernet interface,
	325	typically on wlan0.
	326
	327	The zd1201 device requires external firmware to be loaded.
	328	This can be found at http://linux-lc100020.sourceforge.net/
	329
	330	To compile this driver as a module, choose M here: the
	331	module will be called zd1201.
	332
bf164cc0 JK	333	config USB_NET_RNDIS_WLAN
	334	tristate "Wireless RNDIS USB support"
	335	depends on USB && WLAN_80211 && EXPERIMENTAL
	336	select USB_USBNET
	337	select USB_NET_CDCETHER
	338	select USB_NET_RNDIS_HOST
	339	select WIRELESS_EXT
	340	---help---
	341	This is a driver for wireless RNDIS devices.
	342	These are USB based adapters found in devices such as:
	343
	344	Buffalo WLI-U2-KG125S
	345	U.S. Robotics USR5421
	346	Belkin F5D7051
	347	Linksys WUSB54GSv2
	348	Linksys WUSB54GSC
	349	Asus WL169gE
	350	Eminent EM4045
	351	BT Voyager 1055
	352	Linksys WUSB54GSv1
	353	U.S. Robotics USR5420
	354	BUFFALO WLI-USB-G54
	355
	356	All of these devices are based on Broadcom 4320 chip which is the
	357	only wireless RNDIS chip known to date.
	358
	359	If you choose to build a module, it'll be called rndis_wlan.
	360
f6532111 MW	361	config RTL8180
	362	tristate "Realtek 8180/8185 PCI support"
	363	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	364	select EEPROM_93CX6
	365	---help---
	366	This is a driver for RTL8180 and RTL8185 based cards.
	367	These are PCI based chips found in cards such as:
	368
	369	(RTL8185 802.11g)
	370	A-Link WL54PC
	371
	372	(RTL8180 802.11b)
	373	Belkin F5D6020 v3
	374	Belkin F5D6020 v3
	375	Dlink DWL-610
	376	Dlink DWL-510
	377	Netgear MA521
	378	Level-One WPC-0101
	379	Acer Aspire 1357 LMi
	380	VCTnet PC-11B1
	381	Ovislink AirLive WL-1120PCM
	382	Mentor WL-PCI
	383	Linksys WPC11 v4
	384	TrendNET TEW-288PI
	385	D-Link DWL-520 Rev D
	386	Repotec RP-WP7126
	387	TP-Link TL-WN250/251
	388	Zonet ZEW1000
	389	Longshine LCS-8031-R
	390	HomeLine HLW-PCC200
	391	GigaFast WF721-AEX
	392	Planet WL-3553
	393	Encore ENLWI-PCI1-NT
	394	TrendNET TEW-266PC
	395	Gigabyte GN-WLMR101
	396	Siemens-fujitsu Amilo D1840W
	397	Edimax EW-7126
	398	PheeNet WL-11PCIR
	399	Tonze PC-2100T
	400	Planet WL-8303
	401	Dlink DWL-650 v M1
	402	Edimax EW-7106
	403	Q-Tec 770WC
	404	Topcom Skyr@cer 4011b
	405	Roper FreeLan 802.11b (edition 2004)
	406	Wistron Neweb Corp CB-200B
	407	Pentagram HorNET
	408	QTec 775WC
	409	TwinMOS Booming B Series
	410	Micronet SP906BB
	411	Sweex LC700010
	412	Surecom EP-9428
	413	Safecom SWLCR-1100
	414
	415	Thanks to Realtek for their support!
	416
605bebe2	417	config RTL8187
5c036b21	418	tristate "Realtek 8187 and 8187B USB support"
c8f96974	419	depends on MAC80211 && USB && WLAN_80211
605bebe2 MW	420	select EEPROM_93CX6
605bebe2 MW	421	---help---
5c036b21 HTL	422	This is a driver for RTL8187 and RTL8187B based cards.
5c036b21 HTL	423	These are USB based chips found in devices such as:
605bebe2 MW	424
605bebe2 MW	425	Netgear WG111v2
5c036b21 HTL	426	Level 1 WNC-0301USB
	427	Micronet SP907GK V5
	428	Encore ENUWI-G2
	429	Trendnet TEW-424UB
	430	ASUS P5B Deluxe
	431	Toshiba Satellite Pro series of laptops
7c7e6af3	432	Asus Wireless Link
605bebe2 MW	433
	434	Thanks to Realtek for their support!
	435
cc0b88cf MW	436	config ADM8211
	437	tristate "ADMtek ADM8211 support"
	438	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	439	select CRC32
	440	select EEPROM_93CX6
	441	---help---
	442	This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	443	These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
	444
	445	Xterasys Cardbus XN-2411b
	446	Blitz NetWave Point PC
	447	TrendNet 221pc
	448	Belkin F5D6001
	449	SMC 2635W
	450	Linksys WPC11 v1
	451	Fiberline FL-WL-200X
	452	3com Office Connect (3CRSHPW796)
	453	Corega WLPCIB-11
	454	SMC 2602W V2 EU
	455	D-Link DWL-520 Revision C
	456
	457	However, some of these cards have been replaced with other chips
	458	like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	459	the Ralink RT2400 (SMC2635W) without a model number change.
	460
	461	Thanks to Infineon-ADMtek for their support of this driver.
	462
acc1e7a3 JM	463	config MAC80211_HWSIM
	464	tristate "Simulated radio testing tool for mac80211"
	465	depends on MAC80211 && WLAN_80211
	466	---help---
	467	This driver is a developer testing tool that can be used to test
	468	IEEE 802.11 networking stack (mac80211) functionality. This is not
	469	needed for normal wireless LAN usage and is only for testing. See
	470	Documentation/networking/mac80211_hwsim for more information on how
	471	to use this tool.
	472
	473	To compile this driver as a module, choose M here: the module will be
	474	called mac80211_hwsim. If unsure, say N.
	475
a66098da LB	476	config MWL8K
	477	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
	478	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	479	---help---
	480	This driver supports Marvell TOPDOG 802.11 wireless cards.
	481
	482	To compile this driver as a module, choose M here: the module
	483	will be called mwl8k. If unsure, say N.
	484
fb269710	485	source "drivers/net/wireless/p54/Kconfig"
e9ddc0f2	486	source "drivers/net/wireless/ath5k/Kconfig"
f078f209	487	source "drivers/net/wireless/ath9k/Kconfig"
75ca88c9	488	source "drivers/net/wireless/ar9170/Kconfig"
0795cd29	489	source "drivers/net/wireless/ipw2x00/Kconfig"
b481de9c	490	source "drivers/net/wireless/iwlwifi/Kconfig"
ff1d2767	491	source "drivers/net/wireless/hostap/Kconfig"
e4d6b795	492	source "drivers/net/wireless/b43/Kconfig"
75388acd	493	source "drivers/net/wireless/b43legacy/Kconfig"
e85d0918	494	source "drivers/net/wireless/zd1211rw/Kconfig"
95ea3627	495	source "drivers/net/wireless/rt2x00/Kconfig"
49c1d208	496	source "drivers/net/wireless/orinoco/Kconfig"
70e5e983	497
1da177e4	498	endmenu