]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/net/pcmcia/pcnet_cs.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
[net-next-2.6.git] / drivers / net / pcmcia / pcnet_cs.c
CommitLineData
1da177e4
LT		 1/*======================================================================
2
3 A PCMCIA ethernet driver for NS8390-based cards
4
5 This driver supports the D-Link DE-650 and Linksys EthernetCard
6 cards, the newer D-Link and Linksys combo cards, Accton EN2212
7 cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
8 mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
9 Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
10 mode. It will also handle the Socket EA card in either mode.
11
12 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
13
14 pcnet_cs.c 1.153 2003/11/09 18:53:09
15
16 The network driver code is based on Donald Becker's NE2000 code:
17
18 Written 1992,1993 by Donald Becker.
19 Copyright 1993 United States Government as represented by the
20 Director, National Security Agency. This software may be used and
21 distributed according to the terms of the GNU General Public License,
22 incorporated herein by reference.
23 Donald Becker may be reached at becker@scyld.com
24
25 Based also on Keith Moore's changes to Don Becker's code, for IBM
26 CCAE support. Drivers merged back together, and shared-memory
27 Socket EA support added, by Ken Raeburn, September 1995.
28
29======================================================================*/
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/init.h>
34#include <linux/ptrace.h>
35#include <linux/slab.h>
36#include <linux/string.h>
37#include <linux/timer.h>
38#include <linux/delay.h>
39#include <linux/ethtool.h>
40#include <linux/netdevice.h>
41#include <../drivers/net/8390.h>
42
1da177e4
LT		 43#include <pcmcia/cs_types.h>
44#include <pcmcia/cs.h>
45#include <pcmcia/cistpl.h>
46#include <pcmcia/ciscode.h>
47#include <pcmcia/ds.h>
48#include <pcmcia/cisreg.h>
49
50#include <asm/io.h>
51#include <asm/system.h>
52#include <asm/byteorder.h>
53#include <asm/uaccess.h>
54
55#define PCNET_CMD 0x00
56#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
57#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
58#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
59
60#define PCNET_START_PG 0x40 /* First page of TX buffer */
61#define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */
62
63/* Socket EA cards have a larger packet buffer */
64#define SOCKET_START_PG 0x01
65#define SOCKET_STOP_PG 0xff
66
67#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */
68
f71e1309 69static const char *if_names[] = { "auto", "10baseT", "10base2"};
1da177e4
LT		 70
71#ifdef PCMCIA_DEBUG
72static int pc_debug = PCMCIA_DEBUG;
73module_param(pc_debug, int, 0);
74#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
75static char *version =
76"pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)";
77#else
78#define DEBUG(n, args...)
79#endif
80
81/*====================================================================*/
82
83/* Module parameters */
84
85MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
86MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver");
87MODULE_LICENSE("GPL");
88
89#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
90
91INT_MODULE_PARM(if_port, 1); /* Transceiver type */
92INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */
93INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */
94INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */
95INT_MODULE_PARM(delay_time, 4); /* in usec */
96INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */
97INT_MODULE_PARM(full_duplex, 0); /* full duplex? */
98
99/* Ugh! Let the user hardwire the hardware address for queer cards */
100static int hw_addr[6] = { 0, /* ... */ };
101module_param_array(hw_addr, int, NULL, 0);
102
103/*====================================================================*/
104
105static void mii_phy_probe(struct net_device *dev);
106static void pcnet_config(dev_link_t *link);
107static void pcnet_release(dev_link_t *link);
1da177e4
LT		 108static int pcnet_open(struct net_device *dev);
109static int pcnet_close(struct net_device *dev);
110static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
111static struct ethtool_ops netdev_ethtool_ops;
112static irqreturn_t ei_irq_wrapper(int irq, void *dev_id, struct pt_regs *regs);
113static void ei_watchdog(u_long arg);
114static void pcnet_reset_8390(struct net_device *dev);
115static int set_config(struct net_device *dev, struct ifmap *map);
116static int setup_shmem_window(dev_link_t *link, int start_pg,
117 int stop_pg, int cm_offset);
118static int setup_dma_config(dev_link_t *link, int start_pg,
119 int stop_pg);
120
cc3b4866 121static void pcnet_detach(struct pcmcia_device *p_dev);
1da177e4
LT		 122
123static dev_info_t dev_info = "pcnet_cs";
1da177e4
LT		 124
125/*====================================================================*/
126
127typedef struct hw_info_t {
128 u_int offset;
129 u_char a0, a1, a2;
130 u_int flags;
131} hw_info_t;
132
133#define DELAY_OUTPUT 0x01
134#define HAS_MISC_REG 0x02
135#define USE_BIG_BUF 0x04
136#define HAS_IBM_MISC 0x08
137#define IS_DL10019 0x10
138#define IS_DL10022 0x20
139#define HAS_MII 0x40
140#define USE_SHMEM 0x80 /* autodetected */
141
142#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */
143#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */
144#define MII_PHYID_REV_MASK 0xfffffff0
145#define MII_PHYID_REG1 0x02
146#define MII_PHYID_REG2 0x03
147
148static hw_info_t hw_info[] = {
149 { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
150 { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
151 { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
152 { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
153 DELAY_OUTPUT | HAS_IBM_MISC },
154 { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
155 { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
156 { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
157 { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
158 { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
159 { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
160 { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
161 HAS_MISC_REG | HAS_IBM_MISC },
162 { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
163 { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
164 { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
165 HAS_MISC_REG | HAS_IBM_MISC },
166 { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
167 HAS_MISC_REG | HAS_IBM_MISC },
168 { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
169 HAS_MISC_REG | HAS_IBM_MISC },
170 { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
171 HAS_MISC_REG | HAS_IBM_MISC },
172 { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
173 HAS_MISC_REG | HAS_IBM_MISC },
174 { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
175 HAS_MISC_REG | HAS_IBM_MISC },
176 { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
177 HAS_MISC_REG | HAS_IBM_MISC },
178 { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
179 HAS_MISC_REG | HAS_IBM_MISC },
180 { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
181 HAS_MISC_REG | HAS_IBM_MISC },
182 { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
183 HAS_MISC_REG | HAS_IBM_MISC },
184 { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
185 { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
186 { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
187 HAS_MISC_REG | HAS_IBM_MISC },
188 { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
189 HAS_MISC_REG | HAS_IBM_MISC },
190 { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
191 { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
192 { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
193 { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
194 { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
195 HAS_MISC_REG | HAS_IBM_MISC },
196 { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
197 HAS_MISC_REG | HAS_IBM_MISC },
198 { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
199 { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
200 { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
201 { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
202 DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
203 { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
204 { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
205 { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
206 { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
207 { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
208};
209
210#define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t))
211
212static hw_info_t default_info = { 0, 0, 0, 0, 0 };
213static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII };
214static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
215
216typedef struct pcnet_dev_t {
fd238232 217 struct pcmcia_device *p_dev;
1da177e4
LT		 218 dev_node_t node;
219 u_int flags;
220 void __iomem *base;
221 struct timer_list watchdog;
222 int stale, fast_poll;
223 u_char phy_id;
224 u_char eth_phy, pna_phy;
225 u_short link_status;
226 u_long mii_reset;
227} pcnet_dev_t;
228
229static inline pcnet_dev_t *PRIV(struct net_device *dev)
230{
231 char *p = netdev_priv(dev);
232 return (pcnet_dev_t *)(p + sizeof(struct ei_device));
233}
234
235/*======================================================================
236
237 pcnet_attach() creates an "instance" of the driver, allocating
238 local data structures for one device. The device is registered
239 with Card Services.
240
241======================================================================*/
242
f8cfa618 243static int pcnet_probe(struct pcmcia_device *p_dev)
1da177e4
LT		 244{
245 pcnet_dev_t *info;
1da177e4 246 struct net_device *dev;
fd238232 247 dev_link_t *link = dev_to_instance(p_dev);
1da177e4
LT		 248
249 DEBUG(0, "pcnet_attach()\n");
250
251 /* Create new ethernet device */
252 dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
f8cfa618 253 if (!dev) return -ENOMEM;
1da177e4 254 info = PRIV(dev);
fd238232 255 info->p_dev = p_dev;
1da177e4
LT		 256 link->priv = dev;
257
258 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
259 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
260 link->conf.Attributes = CONF_ENABLE_IRQ;
261 link->conf.IntType = INT_MEMORY_AND_IO;
262
263 SET_MODULE_OWNER(dev);
264 dev->open = &pcnet_open;
265 dev->stop = &pcnet_close;
266 dev->set_config = &set_config;
267
f8cfa618
DB		 268 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
269 pcnet_config(link);
1da177e4 270
f8cfa618 271 return 0;
1da177e4
LT		 272} /* pcnet_attach */
273
274/*======================================================================
275
276 This deletes a driver "instance". The device is de-registered
277 with Card Services. If it has been released, all local data
278 structures are freed. Otherwise, the structures will be freed
279 when the device is released.
280
281======================================================================*/
282
cc3b4866 283static void pcnet_detach(struct pcmcia_device *p_dev)
1da177e4 284{
cc3b4866
DB		 285 dev_link_t *link = dev_to_instance(p_dev);
286 struct net_device *dev = link->priv;
1da177e4 287
cc3b4866 288 DEBUG(0, "pcnet_detach(0x%p)\n", link);
1da177e4 289
fd238232 290 if (link->dev_node)
cc3b4866 291 unregister_netdev(dev);
1da177e4 292
cc3b4866
DB		 293 if (link->state & DEV_CONFIG)
294 pcnet_release(link);
1da177e4 295
cc3b4866 296 free_netdev(dev);
1da177e4
LT		 297} /* pcnet_detach */
298
299/*======================================================================
300
301 This probes for a card's hardware address, for card types that
302 encode this information in their CIS.
303
304======================================================================*/
305
306static hw_info_t *get_hwinfo(dev_link_t *link)
307{
308 struct net_device *dev = link->priv;
309 win_req_t req;
310 memreq_t mem;
311 u_char __iomem *base, *virt;
312 int i, j;
313
314 /* Allocate a small memory window */
315 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
316 req.Base = 0; req.Size = 0;
317 req.AccessSpeed = 0;
318 i = pcmcia_request_window(&link->handle, &req, &link->win);
319 if (i != CS_SUCCESS) {
320 cs_error(link->handle, RequestWindow, i);
321 return NULL;
322 }
323
324 virt = ioremap(req.Base, req.Size);
325 mem.Page = 0;
326 for (i = 0; i < NR_INFO; i++) {
327 mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
328 pcmcia_map_mem_page(link->win, &mem);
329 base = &virt[hw_info[i].offset & (req.Size-1)];
330 if ((readb(base+0) == hw_info[i].a0) &&
331 (readb(base+2) == hw_info[i].a1) &&
332 (readb(base+4) == hw_info[i].a2))
333 break;
334 }
335 if (i < NR_INFO) {
336 for (j = 0; j < 6; j++)
337 dev->dev_addr[j] = readb(base + (j<<1));
338 }
339
340 iounmap(virt);
341 j = pcmcia_release_window(link->win);
342 if (j != CS_SUCCESS)
343 cs_error(link->handle, ReleaseWindow, j);
344 return (i < NR_INFO) ? hw_info+i : NULL;
345} /* get_hwinfo */
346
347/*======================================================================
348
349 This probes for a card's hardware address by reading the PROM.
350 It checks the address against a list of known types, then falls
351 back to a simple NE2000 clone signature check.
352
353======================================================================*/
354
355static hw_info_t *get_prom(dev_link_t *link)
356{
357 struct net_device *dev = link->priv;
358 kio_addr_t ioaddr = dev->base_addr;
359 u_char prom[32];
360 int i, j;
361
362 /* This is lifted straight from drivers/net/ne.c */
363 struct {
364 u_char value, offset;
365 } program_seq[] = {
366 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
367 {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
368 {0x00, EN0_RCNTLO}, /* Clear the count regs. */
369 {0x00, EN0_RCNTHI},
370 {0x00, EN0_IMR}, /* Mask completion irq. */
371 {0xFF, EN0_ISR},
372 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
373 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
374 {32, EN0_RCNTLO},
375 {0x00, EN0_RCNTHI},
376 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
377 {0x00, EN0_RSARHI},
378 {E8390_RREAD+E8390_START, E8390_CMD},
379 };
380
381 pcnet_reset_8390(dev);
382 mdelay(10);
383
384 for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
385 outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
386
387 for (i = 0; i < 32; i++)
388 prom[i] = inb(ioaddr + PCNET_DATAPORT);
389 for (i = 0; i < NR_INFO; i++) {
390 if ((prom[0] == hw_info[i].a0) &&
391 (prom[2] == hw_info[i].a1) &&
392 (prom[4] == hw_info[i].a2))
393 break;
394 }
395 if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
396 for (j = 0; j < 6; j++)
397 dev->dev_addr[j] = prom[j<<1];
398 return (i < NR_INFO) ? hw_info+i : &default_info;
399 }
400 return NULL;
401} /* get_prom */
402
403/*======================================================================
404
405 For DL10019 based cards, like the Linksys EtherFast
406
407======================================================================*/
408
409static hw_info_t *get_dl10019(dev_link_t *link)
410{
411 struct net_device *dev = link->priv;
412 int i;
413 u_char sum;
414
415 for (sum = 0, i = 0x14; i < 0x1c; i++)
416 sum += inb_p(dev->base_addr + i);
417 if (sum != 0xff)
418 return NULL;
419 for (i = 0; i < 6; i++)
420 dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i);
421 i = inb(dev->base_addr + 0x1f);
422 return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info;
423}
424
425/*======================================================================
426
427 For Asix AX88190 based cards
428
429======================================================================*/
430
431static hw_info_t *get_ax88190(dev_link_t *link)
432{
433 struct net_device *dev = link->priv;
434 kio_addr_t ioaddr = dev->base_addr;
435 int i, j;
436
437 /* Not much of a test, but the alternatives are messy */
438 if (link->conf.ConfigBase != 0x03c0)
439 return NULL;
440
441 outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */
442 outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */
443 outb_p(0x04, ioaddr + EN0_RSARHI);
444 outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD);
445
446 for (i = 0; i < 6; i += 2) {
447 j = inw(ioaddr + PCNET_DATAPORT);
448 dev->dev_addr[i] = j & 0xff;
449 dev->dev_addr[i+1] = j >> 8;
450 }
451 printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n");
452 printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n");
453 return NULL;
454}
455
456/*======================================================================
457
458 This should be totally unnecessary... but when we can't figure
459 out the hardware address any other way, we'll let the user hard
460 wire it when the module is initialized.
461
462======================================================================*/
463
464static hw_info_t *get_hwired(dev_link_t *link)
465{
466 struct net_device *dev = link->priv;
467 int i;
468
469 for (i = 0; i < 6; i++)
470 if (hw_addr[i] != 0) break;
471 if (i == 6)
472 return NULL;
473
474 for (i = 0; i < 6; i++)
475 dev->dev_addr[i] = hw_addr[i];
476
477 return &default_info;
478} /* get_hwired */
479
480/*======================================================================
481
482 pcnet_config() is scheduled to run after a CARD_INSERTION event
483 is received, to configure the PCMCIA socket, and to make the
484 ethernet device available to the system.
485
486======================================================================*/
487
488#define CS_CHECK(fn, ret) \
489do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
490
491static int try_io_port(dev_link_t *link)
492{
493 int j, ret;
494 if (link->io.NumPorts1 == 32) {
495 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
496 if (link->io.NumPorts2 > 0) {
497 /* for master/slave multifunction cards */
498 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
499 link->irq.Attributes =
500 IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
501 }
502 } else {
503 /* This should be two 16-port windows */
504 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
505 link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
506 }
507 if (link->io.BasePort1 == 0) {
508 link->io.IOAddrLines = 16;
509 for (j = 0; j < 0x400; j += 0x20) {
510 link->io.BasePort1 = j ^ 0x300;
511 link->io.BasePort2 = (j ^ 0x300) + 0x10;
512 ret = pcmcia_request_io(link->handle, &link->io);
513 if (ret == CS_SUCCESS) return ret;
514 }
515 return ret;
516 } else {
517 return pcmcia_request_io(link->handle, &link->io);
518 }
519}
520
521static void pcnet_config(dev_link_t *link)
522{
523 client_handle_t handle = link->handle;
524 struct net_device *dev = link->priv;
525 pcnet_dev_t *info = PRIV(dev);
526 tuple_t tuple;
527 cisparse_t parse;
528 int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
529 int manfid = 0, prodid = 0, has_shmem = 0;
530 u_short buf[64];
1da177e4
LT		 531 hw_info_t *hw_info;
532
533 DEBUG(0, "pcnet_config(0x%p)\n", link);
534
535 tuple.Attributes = 0;
536 tuple.TupleData = (cisdata_t *)buf;
537 tuple.TupleDataMax = sizeof(buf);
538 tuple.TupleOffset = 0;
539 tuple.DesiredTuple = CISTPL_CONFIG;
540 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
541 CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
542 CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
543 link->conf.ConfigBase = parse.config.base;
544 link->conf.Present = parse.config.rmask[0];
545
546 /* Configure card */
547 link->state |= DEV_CONFIG;
548
1da177e4
LT		 549 tuple.DesiredTuple = CISTPL_MANFID;
550 tuple.Attributes = TUPLE_RETURN_COMMON;
551 if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) &&
552 (pcmcia_get_tuple_data(handle, &tuple) == CS_SUCCESS)) {
553 manfid = le16_to_cpu(buf[0]);
554 prodid = le16_to_cpu(buf[1]);
555 }
556
557 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
558 tuple.Attributes = 0;
559 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
560 while (last_ret == CS_SUCCESS) {
561 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
562 cistpl_io_t *io = &(parse.cftable_entry.io);
563
564 if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
565 pcmcia_parse_tuple(handle, &tuple, &parse) != 0 ||
566 cfg->index == 0 || cfg->io.nwin == 0)
567 goto next_entry;
568
569 link->conf.ConfigIndex = cfg->index;
570 /* For multifunction cards, by convention, we configure the
571 network function with window 0, and serial with window 1 */
572 if (io->nwin > 1) {
573 i = (io->win[1].len > io->win[0].len);
574 link->io.BasePort2 = io->win[1-i].base;
575 link->io.NumPorts2 = io->win[1-i].len;
576 } else {
577 i = link->io.NumPorts2 = 0;
578 }
579 has_shmem = ((cfg->mem.nwin == 1) &&
580 (cfg->mem.win[0].len >= 0x4000));
581 link->io.BasePort1 = io->win[i].base;
582 link->io.NumPorts1 = io->win[i].len;
583 link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
584 if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
585 last_ret = try_io_port(link);
586 if (last_ret == CS_SUCCESS) break;
587 }
588 next_entry:
589 last_ret = pcmcia_get_next_tuple(handle, &tuple);
590 }
591 if (last_ret != CS_SUCCESS) {
592 cs_error(handle, RequestIO, last_ret);
593 goto failed;
594 }
595
596 CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
597
598 if (link->io.NumPorts2 == 8) {
599 link->conf.Attributes |= CONF_ENABLE_SPKR;
600 link->conf.Status = CCSR_AUDIO_ENA;
601 }
602 if ((manfid == MANFID_IBM) &&
603 (prodid == PRODID_IBM_HOME_AND_AWAY))
604 link->conf.ConfigIndex |= 0x10;
605
606 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
607 dev->irq = link->irq.AssignedIRQ;
608 dev->base_addr = link->io.BasePort1;
609 if (info->flags & HAS_MISC_REG) {
610 if ((if_port == 1) || (if_port == 2))
611 dev->if_port = if_port;
612 else
613 printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
614 } else {
615 dev->if_port = 0;
616 }
617
618 hw_info = get_hwinfo(link);
619 if (hw_info == NULL)
620 hw_info = get_prom(link);
621 if (hw_info == NULL)
622 hw_info = get_dl10019(link);
623 if (hw_info == NULL)
624 hw_info = get_ax88190(link);
625 if (hw_info == NULL)
626 hw_info = get_hwired(link);
627
628 if (hw_info == NULL) {
629 printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
630 " address for io base %#3lx\n", dev->base_addr);
631 goto failed;
632 }
633
634 info->flags = hw_info->flags;
635 /* Check for user overrides */
636 info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
637 if ((manfid == MANFID_SOCKET) &&
638 ((prodid == PRODID_SOCKET_LPE) ||
639 (prodid == PRODID_SOCKET_LPE_CF) ||
640 (prodid == PRODID_SOCKET_EIO)))
641 info->flags &= ~USE_BIG_BUF;
642 if (!use_big_buf)
643 info->flags &= ~USE_BIG_BUF;
644
645 if (info->flags & USE_BIG_BUF) {
646 start_pg = SOCKET_START_PG;
647 stop_pg = SOCKET_STOP_PG;
648 cm_offset = 0x10000;
649 } else {
650 start_pg = PCNET_START_PG;
651 stop_pg = PCNET_STOP_PG;
652 cm_offset = 0;
653 }
654
655 /* has_shmem is ignored if use_shmem != -1 */
656 if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) ||
657 (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0))
658 setup_dma_config(link, start_pg, stop_pg);
659
660 ei_status.name = "NE2000";
661 ei_status.word16 = 1;
662 ei_status.reset_8390 = &pcnet_reset_8390;
663
664 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
665
666 if (info->flags & (IS_DL10019|IS_DL10022)) {
667 u_char id = inb(dev->base_addr + 0x1a);
668 dev->do_ioctl = &ei_ioctl;
669 mii_phy_probe(dev);
670 if ((id == 0x30) && !info->pna_phy && (info->eth_phy == 4))
671 info->eth_phy = 0;
672 }
673
fd238232 674 link->dev_node = &info->node;
1da177e4
LT		 675 link->state &= ~DEV_CONFIG_PENDING;
676 SET_NETDEV_DEV(dev, &handle_to_dev(handle));
677
678#ifdef CONFIG_NET_POLL_CONTROLLER
679 dev->poll_controller = ei_poll;
680#endif
681
682 if (register_netdev(dev) != 0) {
683 printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
fd238232 684 link->dev_node = NULL;
1da177e4
LT		 685 goto failed;
686 }
687
688 strcpy(info->node.dev_name, dev->name);
689
690 if (info->flags & (IS_DL10019|IS_DL10022)) {
691 u_char id = inb(dev->base_addr + 0x1a);
692 printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ",
693 dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id);
694 if (info->pna_phy)
695 printk("PNA, ");
696 } else {
697 printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name);
698 }
699 printk("io %#3lx, irq %d,", dev->base_addr, dev->irq);
700 if (info->flags & USE_SHMEM)
701 printk (" mem %#5lx,", dev->mem_start);
702 if (info->flags & HAS_MISC_REG)
703 printk(" %s xcvr,", if_names[dev->if_port]);
704 printk(" hw_addr ");
705 for (i = 0; i < 6; i++)
706 printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
707 return;
708
709cs_failed:
710 cs_error(link->handle, last_fn, last_ret);
711failed:
712 pcnet_release(link);
713 link->state &= ~DEV_CONFIG_PENDING;
714 return;
715} /* pcnet_config */
716
717/*======================================================================
718
719 After a card is removed, pcnet_release() will unregister the net
720 device, and release the PCMCIA configuration. If the device is
721 still open, this will be postponed until it is closed.
722
723======================================================================*/
724
725static void pcnet_release(dev_link_t *link)
726{
5f2a71fc 727 pcnet_dev_t *info = PRIV(link->priv);
1da177e4 728
5f2a71fc 729 DEBUG(0, "pcnet_release(0x%p)\n", link);
1da177e4 730
5f2a71fc
DB		 731 if (info->flags & USE_SHMEM)
732 iounmap(info->base);
1da177e4 733
5f2a71fc 734 pcmcia_disable_device(link->handle);
1da177e4
LT		 735}
736
737/*======================================================================
738
739 The card status event handler. Mostly, this schedules other
740 stuff to run after an event is received. A CARD_REMOVAL event
741 also sets some flags to discourage the net drivers from trying
742 to talk to the card any more.
743
744======================================================================*/
745
98e4c28b
DB		 746static int pcnet_suspend(struct pcmcia_device *p_dev)
747{
748 dev_link_t *link = dev_to_instance(p_dev);
749 struct net_device *dev = link->priv;
750
8661bb5b
DB		 751 if ((link->state & DEV_CONFIG) && (link->open))
752 netif_device_detach(dev);
98e4c28b
DB		 753
754 return 0;
755}
756
757static int pcnet_resume(struct pcmcia_device *p_dev)
758{
759 dev_link_t *link = dev_to_instance(p_dev);
760 struct net_device *dev = link->priv;
761
8661bb5b
DB		 762 if ((link->state & DEV_CONFIG) && (link->open)) {
763 pcnet_reset_8390(dev);
764 NS8390_init(dev, 1);
765 netif_device_attach(dev);
98e4c28b
DB		 766 }
767
768 return 0;
769}
770
1da177e4
LT		 771
772/*======================================================================
773
774 MII interface support for DL10019 and DL10022 based cards
775
776 On the DL10019, the MII IO direction bit is 0x10; on the DL10022
777 it is 0x20. Setting both bits seems to work on both card types.
778
779======================================================================*/
780
781#define DLINK_GPIO 0x1c
782#define DLINK_DIAG 0x1d
783#define DLINK_EEPROM 0x1e
784
785#define MDIO_SHIFT_CLK 0x80
786#define MDIO_DATA_OUT 0x40
787#define MDIO_DIR_WRITE 0x30
788#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
789#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
790#define MDIO_DATA_READ 0x10
791#define MDIO_MASK 0x0f
792
793static void mdio_sync(kio_addr_t addr)
794{
795 int bits, mask = inb(addr) & MDIO_MASK;
796 for (bits = 0; bits < 32; bits++) {
797 outb(mask | MDIO_DATA_WRITE1, addr);
798 outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
799 }
800}
801
802static int mdio_read(kio_addr_t addr, int phy_id, int loc)
803{
804 u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
805 int i, retval = 0, mask = inb(addr) & MDIO_MASK;
806
807 mdio_sync(addr);
808 for (i = 13; i >= 0; i--) {
809 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
810 outb(mask | dat, addr);
811 outb(mask | dat | MDIO_SHIFT_CLK, addr);
812 }
813 for (i = 19; i > 0; i--) {
814 outb(mask, addr);
815 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
816 outb(mask | MDIO_SHIFT_CLK, addr);
817 }
818 return (retval>>1) & 0xffff;
819}
820
821static void mdio_write(kio_addr_t addr, int phy_id, int loc, int value)
822{
823 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
824 int i, mask = inb(addr) & MDIO_MASK;
825
826 mdio_sync(addr);
827 for (i = 31; i >= 0; i--) {
828 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
829 outb(mask | dat, addr);
830 outb(mask | dat | MDIO_SHIFT_CLK, addr);
831 }
832 for (i = 1; i >= 0; i--) {
833 outb(mask, addr);
834 outb(mask | MDIO_SHIFT_CLK, addr);
835 }
836}
837
838static void mdio_reset(kio_addr_t addr, int phy_id)
839{
840 outb_p(0x08, addr);
841 outb_p(0x0c, addr);
842 outb_p(0x08, addr);
843 outb_p(0x0c, addr);
844 outb_p(0x00, addr);
845}
846
847/*======================================================================
848
849 EEPROM access routines for DL10019 and DL10022 based cards
850
851======================================================================*/
852
853#define EE_EEP 0x40
854#define EE_ASIC 0x10
855#define EE_CS 0x08
856#define EE_CK 0x04
857#define EE_DO 0x02
858#define EE_DI 0x01
859#define EE_ADOT 0x01 /* DataOut for ASIC */
860#define EE_READ_CMD 0x06
861
862#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */
863
864static int read_eeprom(kio_addr_t ioaddr, int location)
865{
866 int i, retval = 0;
867 kio_addr_t ee_addr = ioaddr + DLINK_EEPROM;
868 int read_cmd = location | (EE_READ_CMD << 8);
869
870 outb(0, ee_addr);
871 outb(EE_EEP|EE_CS, ee_addr);
872
873 /* Shift the read command bits out. */
874 for (i = 10; i >= 0; i--) {
875 short dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
876 outb_p(EE_EEP|EE_CS|dataval, ee_addr);
877 outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr);
878 }
879 outb(EE_EEP|EE_CS, ee_addr);
880
881 for (i = 16; i > 0; i--) {
882 outb_p(EE_EEP|EE_CS | EE_CK, ee_addr);
883 retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0);
884 outb_p(EE_EEP|EE_CS, ee_addr);
885 }
886
887 /* Terminate the EEPROM access. */
888 outb(0, ee_addr);
889 return retval;
890}
891
892/*
893 The internal ASIC registers can be changed by EEPROM READ access
894 with EE_ASIC bit set.
895 In ASIC mode, EE_ADOT is used to output the data to the ASIC.
896*/
897
898static void write_asic(kio_addr_t ioaddr, int location, short asic_data)
899{
900 int i;
901 kio_addr_t ee_addr = ioaddr + DLINK_EEPROM;
902 short dataval;
903 int read_cmd = location | (EE_READ_CMD << 8);
904
905 asic_data |= read_eeprom(ioaddr, location);
906
907 outb(0, ee_addr);
908 outb(EE_ASIC|EE_CS|EE_DI, ee_addr);
909
910 read_cmd = read_cmd >> 1;
911
912 /* Shift the read command bits out. */
913 for (i = 9; i >= 0; i--) {
914 dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
915 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
916 outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr);
917 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
918 }
919 // sync
920 outb(EE_ASIC|EE_CS, ee_addr);
921 outb(EE_ASIC|EE_CS|EE_CK, ee_addr);
922 outb(EE_ASIC|EE_CS, ee_addr);
923
924 for (i = 15; i >= 0; i--) {
925 dataval = (asic_data & (1 << i)) ? EE_ADOT : 0;
926 outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
927 outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr);
928 outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
929 }
930
931 /* Terminate the ASIC access. */
932 outb(EE_ASIC|EE_DI, ee_addr);
933 outb(EE_ASIC|EE_DI| EE_CK, ee_addr);
934 outb(EE_ASIC|EE_DI, ee_addr);
935
936 outb(0, ee_addr);
937}
938
939/*====================================================================*/
940
941static void set_misc_reg(struct net_device *dev)
942{
943 kio_addr_t nic_base = dev->base_addr;
944 pcnet_dev_t *info = PRIV(dev);
945 u_char tmp;
946
947 if (info->flags & HAS_MISC_REG) {
948 tmp = inb_p(nic_base + PCNET_MISC) & ~3;
949 if (dev->if_port == 2)
950 tmp |= 1;
951 if (info->flags & USE_BIG_BUF)
952 tmp |= 2;
953 if (info->flags & HAS_IBM_MISC)
954 tmp |= 8;
955 outb_p(tmp, nic_base + PCNET_MISC);
956 }
957 if (info->flags & IS_DL10022) {
958 if (info->flags & HAS_MII) {
959 mdio_reset(nic_base + DLINK_GPIO, info->eth_phy);
960 /* Restart MII autonegotiation */
961 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
962 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
963 info->mii_reset = jiffies;
964 } else {
965 outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
966 }
d89a64be
K		 967 } else if (info->flags & IS_DL10019) {
968 /* Advertise 100F, 100H, 10F, 10H */
969 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
970 /* Restart MII autonegotiation */
971 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
972 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
1da177e4
LT		 973 }
974}
975
976/*====================================================================*/
977
978static void mii_phy_probe(struct net_device *dev)
979{
980 pcnet_dev_t *info = PRIV(dev);
981 kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO;
982 int i;
983 u_int tmp, phyid;
984
985 for (i = 31; i >= 0; i--) {
986 tmp = mdio_read(mii_addr, i, 1);
987 if ((tmp == 0) || (tmp == 0xffff))
988 continue;
989 tmp = mdio_read(mii_addr, i, MII_PHYID_REG1);
990 phyid = tmp << 16;
991 phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
992 phyid &= MII_PHYID_REV_MASK;
993 DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
994 if (phyid == AM79C9XX_HOME_PHY) {
995 info->pna_phy = i;
996 } else if (phyid != AM79C9XX_ETH_PHY) {
997 info->eth_phy = i;
998 }
999 }
1000}
1001
1002static int pcnet_open(struct net_device *dev)
1003{
1004 pcnet_dev_t *info = PRIV(dev);
fd238232
DB		 1005 dev_link_t *link = info->p_dev;
1006
1da177e4
LT		 1007 DEBUG(2, "pcnet_open('%s')\n", dev->name);
1008
1009 if (!DEV_OK(link))
1010 return -ENODEV;
1011
1012 link->open++;
1013
1014 set_misc_reg(dev);
1015 request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev);
1016
1017 info->phy_id = info->eth_phy;
1018 info->link_status = 0x00;
1019 init_timer(&info->watchdog);
1020 info->watchdog.function = &ei_watchdog;
1021 info->watchdog.data = (u_long)dev;
1022 info->watchdog.expires = jiffies + HZ;
1023 add_timer(&info->watchdog);
1024
1025 return ei_open(dev);
1026} /* pcnet_open */
1027
1028/*====================================================================*/
1029
1030static int pcnet_close(struct net_device *dev)
1031{
1032 pcnet_dev_t *info = PRIV(dev);
fd238232 1033 dev_link_t *link = info->p_dev;
1da177e4
LT		 1034
1035 DEBUG(2, "pcnet_close('%s')\n", dev->name);
1036
1037 ei_close(dev);
1038 free_irq(dev->irq, dev);
1039
1040 link->open--;
1041 netif_stop_queue(dev);
1042 del_timer_sync(&info->watchdog);
1043
1044 return 0;
1045} /* pcnet_close */
1046
1047/*======================================================================
1048
1049 Hard reset the card. This used to pause for the same period that
1050 a 8390 reset command required, but that shouldn't be necessary.
1051
1052======================================================================*/
1053
1054static void pcnet_reset_8390(struct net_device *dev)
1055{
1056 kio_addr_t nic_base = dev->base_addr;
1057 int i;
1058
1059 ei_status.txing = ei_status.dmaing = 0;
1060
1061 outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
1062
1063 outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET);
1064
1065 for (i = 0; i < 100; i++) {
1066 if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
1067 break;
1068 udelay(100);
1069 }
1070 outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
1071
1072 if (i == 100)
1073 printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n",
1074 dev->name);
1075 set_misc_reg(dev);
1076
1077} /* pcnet_reset_8390 */
1078
1079/*====================================================================*/
1080
1081static int set_config(struct net_device *dev, struct ifmap *map)
1082{
1083 pcnet_dev_t *info = PRIV(dev);
1084 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
1085 if (!(info->flags & HAS_MISC_REG))
1086 return -EOPNOTSUPP;
1087 else if ((map->port < 1) || (map->port > 2))
1088 return -EINVAL;
1089 dev->if_port = map->port;
1090 printk(KERN_INFO "%s: switched to %s port\n",
1091 dev->name, if_names[dev->if_port]);
1092 NS8390_init(dev, 1);
1093 }
1094 return 0;
1095}
1096
1097/*====================================================================*/
1098
1099static irqreturn_t ei_irq_wrapper(int irq, void *dev_id, struct pt_regs *regs)
1100{
1101 struct net_device *dev = dev_id;
93ad4fb0 1102 pcnet_dev_t *info;
1da177e4
LT		 1103 irqreturn_t ret = ei_interrupt(irq, dev_id, regs);
1104
93ad4fb0
AM		 1105 if (ret == IRQ_HANDLED) {
1106 info = PRIV(dev);
1da177e4 1107 info->stale = 0;
93ad4fb0 1108 }
1da177e4
LT		 1109 return ret;
1110}
1111
1112static void ei_watchdog(u_long arg)
1113{
1114 struct net_device *dev = (struct net_device *)arg;
1115 pcnet_dev_t *info = PRIV(dev);
1116 kio_addr_t nic_base = dev->base_addr;
1117 kio_addr_t mii_addr = nic_base + DLINK_GPIO;
1118 u_short link;
1119
1120 if (!netif_device_present(dev)) goto reschedule;
1121
1122 /* Check for pending interrupt with expired latency timer: with
1123 this, we can limp along even if the interrupt is blocked */
1124 outb_p(E8390_NODMA+E8390_PAGE0, nic_base + E8390_CMD);
1125 if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
1126 if (!info->fast_poll)
1127 printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
1128 ei_irq_wrapper(dev->irq, dev, NULL);
1129 info->fast_poll = HZ;
1130 }
1131 if (info->fast_poll) {
1132 info->fast_poll--;
1133 info->watchdog.expires = jiffies + 1;
1134 add_timer(&info->watchdog);
1135 return;
1136 }
1137
1138 if (!(info->flags & HAS_MII))
1139 goto reschedule;
1140
1141 mdio_read(mii_addr, info->phy_id, 1);
1142 link = mdio_read(mii_addr, info->phy_id, 1);
1143 if (!link || (link == 0xffff)) {
1144 if (info->eth_phy) {
1145 info->phy_id = info->eth_phy = 0;
1146 } else {
1147 printk(KERN_INFO "%s: MII is missing!\n", dev->name);
1148 info->flags &= ~HAS_MII;
1149 }
1150 goto reschedule;
1151 }
1152
1153 link &= 0x0004;
1154 if (link != info->link_status) {
1155 u_short p = mdio_read(mii_addr, info->phy_id, 5);
1156 printk(KERN_INFO "%s: %s link beat\n", dev->name,
1157 (link) ? "found" : "lost");
1158 if (link && (info->flags & IS_DL10022)) {
1159 /* Disable collision detection on full duplex links */
1160 outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
1161 } else if (link && (info->flags & IS_DL10019)) {
1162 /* Disable collision detection on full duplex links */
1163 write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0);
1164 }
1165 if (link) {
1166 if (info->phy_id == info->eth_phy) {
1167 if (p)
1168 printk(KERN_INFO "%s: autonegotiation complete: "
1169 "%sbaseT-%cD selected\n", dev->name,
1170 ((p & 0x0180) ? "100" : "10"),
1171 ((p & 0x0140) ? 'F' : 'H'));
1172 else
1173 printk(KERN_INFO "%s: link partner did not "
1174 "autonegotiate\n", dev->name);
1175 }
1176 NS8390_init(dev, 1);
1177 }
1178 info->link_status = link;
1179 }
1180 if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) {
1181 link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004;
1182 if (((info->phy_id == info->pna_phy) && link) ||
1183 ((info->phy_id != info->pna_phy) && !link)) {
1184 /* isolate this MII and try flipping to the other one */
1185 mdio_write(mii_addr, info->phy_id, 0, 0x0400);
1186 info->phy_id ^= info->pna_phy ^ info->eth_phy;
1187 printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name,
1188 (info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
1189 mdio_write(mii_addr, info->phy_id, 0,
1190 (info->phy_id == info->eth_phy) ? 0x1000 : 0);
1191 info->link_status = 0;
1192 info->mii_reset = jiffies;
1193 }
1194 }
1195
1196reschedule:
1197 info->watchdog.expires = jiffies + HZ;
1198 add_timer(&info->watchdog);
1199}
1200
1201/*====================================================================*/
1202
1203static void netdev_get_drvinfo(struct net_device *dev,
1204 struct ethtool_drvinfo *info)
1205{
1206 strcpy(info->driver, "pcnet_cs");
1207}
1208
1209static struct ethtool_ops netdev_ethtool_ops = {
1210 .get_drvinfo = netdev_get_drvinfo,
1211};
1212
1213/*====================================================================*/
1214
1215
1216static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1217{
1218 pcnet_dev_t *info = PRIV(dev);
1219 u16 *data = (u16 *)&rq->ifr_ifru;
1220 kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO;
1221 switch (cmd) {
1222 case SIOCGMIIPHY:
1223 data[0] = info->phy_id;
1224 case SIOCGMIIREG: /* Read MII PHY register. */
1225 data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f);
1226 return 0;
1227 case SIOCSMIIREG: /* Write MII PHY register. */
1228 if (!capable(CAP_NET_ADMIN))
1229 return -EPERM;
1230 mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]);
1231 return 0;
1232 }
1233 return -EOPNOTSUPP;
1234}
1235
1236/*====================================================================*/
1237
1238static void dma_get_8390_hdr(struct net_device *dev,
1239 struct e8390_pkt_hdr *hdr,
1240 int ring_page)
1241{
1242 kio_addr_t nic_base = dev->base_addr;
1243
1244 if (ei_status.dmaing) {
1245 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
1246 "[DMAstat:%1x][irqlock:%1x]\n",
1247 dev->name, ei_status.dmaing, ei_status.irqlock);
1248 return;
1249 }
1250
1251 ei_status.dmaing |= 0x01;
1252 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1253 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
1254 outb_p(0, nic_base + EN0_RCNTHI);
1255 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
1256 outb_p(ring_page, nic_base + EN0_RSARHI);
1257 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1258
1259 insw(nic_base + PCNET_DATAPORT, hdr,
1260 sizeof(struct e8390_pkt_hdr)>>1);
1261 /* Fix for big endian systems */
1262 hdr->count = le16_to_cpu(hdr->count);
1263
1264 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1265 ei_status.dmaing &= ~0x01;
1266}
1267
1268/*====================================================================*/
1269
1270static void dma_block_input(struct net_device *dev, int count,
1271 struct sk_buff *skb, int ring_offset)
1272{
1273 kio_addr_t nic_base = dev->base_addr;
1274 int xfer_count = count;
1275 char *buf = skb->data;
1276
1277#ifdef PCMCIA_DEBUG
1278 if ((ei_debug > 4) && (count != 4))
1279 printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
1280#endif
1281 if (ei_status.dmaing) {
1282 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
1283 "[DMAstat:%1x][irqlock:%1x]\n",
1284 dev->name, ei_status.dmaing, ei_status.irqlock);
1285 return;
1286 }
1287 ei_status.dmaing |= 0x01;
1288 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1289 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1290 outb_p(count >> 8, nic_base + EN0_RCNTHI);
1291 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
1292 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
1293 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1294
1295 insw(nic_base + PCNET_DATAPORT,buf,count>>1);
1296 if (count & 0x01)
1297 buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
1298
93ad4fb0 1299 /* This was for the ALPHA version only, but enough people have been
1da177e4
LT		 1300 encountering problems that it is still here. */
1301#ifdef PCMCIA_DEBUG
1302 if (ei_debug > 4) { /* DMA termination address check... */
1303 int addr, tries = 20;
1304 do {
1305 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
1306 -- it's broken for Rx on some cards! */
1307 int high = inb_p(nic_base + EN0_RSARHI);
1308 int low = inb_p(nic_base + EN0_RSARLO);
1309 addr = (high << 8) + low;
1310 if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff))
1311 break;
1312 } while (--tries > 0);
1313 if (tries <= 0)
1314 printk(KERN_NOTICE "%s: RX transfer address mismatch,"
1315 "%#4.4x (expected) vs. %#4.4x (actual).\n",
1316 dev->name, ring_offset + xfer_count, addr);
1317 }
1318#endif
1319 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1320 ei_status.dmaing &= ~0x01;
1321} /* dma_block_input */
1322
1323/*====================================================================*/
1324
1325static void dma_block_output(struct net_device *dev, int count,
1326 const u_char *buf, const int start_page)
1327{
1328 kio_addr_t nic_base = dev->base_addr;
1329 pcnet_dev_t *info = PRIV(dev);
1330#ifdef PCMCIA_DEBUG
1331 int retries = 0;
1332#endif
1333 u_long dma_start;
1334
1335#ifdef PCMCIA_DEBUG
1336 if (ei_debug > 4)
1337 printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
1338#endif
1339
1340 /* Round the count up for word writes. Do we need to do this?
1341 What effect will an odd byte count have on the 8390?
1342 I should check someday. */
1343 if (count & 0x01)
1344 count++;
1345 if (ei_status.dmaing) {
1346 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output."
1347 "[DMAstat:%1x][irqlock:%1x]\n",
1348 dev->name, ei_status.dmaing, ei_status.irqlock);
1349 return;
1350 }
1351 ei_status.dmaing |= 0x01;
1352 /* We should already be in page 0, but to be safe... */
1353 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD);
1354
1355#ifdef PCMCIA_DEBUG
1356 retry:
1357#endif
1358
1359 outb_p(ENISR_RDC, nic_base + EN0_ISR);
1360
1361 /* Now the normal output. */
1362 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1363 outb_p(count >> 8, nic_base + EN0_RCNTHI);
1364 outb_p(0x00, nic_base + EN0_RSARLO);
1365 outb_p(start_page, nic_base + EN0_RSARHI);
1366
1367 outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD);
1368 outsw(nic_base + PCNET_DATAPORT, buf, count>>1);
1369
1370 dma_start = jiffies;
1371
1372#ifdef PCMCIA_DEBUG
93ad4fb0 1373 /* This was for the ALPHA version only, but enough people have been
1da177e4
LT		 1374 encountering problems that it is still here. */
1375 if (ei_debug > 4) { /* DMA termination address check... */
1376 int addr, tries = 20;
1377 do {
1378 int high = inb_p(nic_base + EN0_RSARHI);
1379 int low = inb_p(nic_base + EN0_RSARLO);
1380 addr = (high << 8) + low;
1381 if ((start_page << 8) + count == addr)
1382 break;
1383 } while (--tries > 0);
1384 if (tries <= 0) {
1385 printk(KERN_NOTICE "%s: Tx packet transfer address mismatch,"
1386 "%#4.4x (expected) vs. %#4.4x (actual).\n",
1387 dev->name, (start_page << 8) + count, addr);
1388 if (retries++ == 0)
1389 goto retry;
1390 }
1391 }
1392#endif
1393
1394 while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
1395 if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
1396 printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n",
1397 dev->name);
1398 pcnet_reset_8390(dev);
1399 NS8390_init(dev, 1);
1400 break;
1401 }
1402
1403 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1404 if (info->flags & DELAY_OUTPUT)
1405 udelay((long)delay_time);
1406 ei_status.dmaing &= ~0x01;
1407}
1408
1409/*====================================================================*/
1410
1411static int setup_dma_config(dev_link_t *link, int start_pg,
1412 int stop_pg)
1413{
1414 struct net_device *dev = link->priv;
1415
1416 ei_status.tx_start_page = start_pg;
1417 ei_status.rx_start_page = start_pg + TX_PAGES;
1418 ei_status.stop_page = stop_pg;
1419
1420 /* set up block i/o functions */
1421 ei_status.get_8390_hdr = &dma_get_8390_hdr;
1422 ei_status.block_input = &dma_block_input;
1423 ei_status.block_output = &dma_block_output;
1424
1425 return 0;
1426}
1427
1428/*====================================================================*/
1429
1430static void copyin(void *dest, void __iomem *src, int c)
1431{
1432 u_short *d = dest;
1433 u_short __iomem *s = src;
1434 int odd;
1435
1436 if (c <= 0)
1437 return;
1438 odd = (c & 1); c >>= 1;
1439
1440 if (c) {
1441 do { *d++ = __raw_readw(s++); } while (--c);
1442 }
1443 /* get last byte by fetching a word and masking */
1444 if (odd)
1445 *((u_char *)d) = readw(s) & 0xff;
1446}
1447
1448static void copyout(void __iomem *dest, const void *src, int c)
1449{
1450 u_short __iomem *d = dest;
1451 const u_short *s = src;
1452 int odd;
1453
1454 if (c <= 0)
1455 return;
1456 odd = (c & 1); c >>= 1;
1457
1458 if (c) {
1459 do { __raw_writew(*s++, d++); } while (--c);
1460 }
1461 /* copy last byte doing a read-modify-write */
1462 if (odd)
1463 writew((readw(d) & 0xff00) | *(u_char *)s, d);
1464}
1465
1466/*====================================================================*/
1467
1468static void shmem_get_8390_hdr(struct net_device *dev,
1469 struct e8390_pkt_hdr *hdr,
1470 int ring_page)
1471{
1472 void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
1473 + (ring_page << 8)
1474 - (ei_status.rx_start_page << 8);
1475
1476 copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr));
1477 /* Fix for big endian systems */
1478 hdr->count = le16_to_cpu(hdr->count);
1479}
1480
1481/*====================================================================*/
1482
1483static void shmem_block_input(struct net_device *dev, int count,
1484 struct sk_buff *skb, int ring_offset)
1485{
99417769
AV		 1486 void __iomem *base = ei_status.mem;
1487 unsigned long offset = (TX_PAGES<<8) + ring_offset
1da177e4
LT		 1488 - (ei_status.rx_start_page << 8);
1489 char *buf = skb->data;
1490
99417769 1491 if (offset + count > ei_status.priv) {
1da177e4 1492 /* We must wrap the input move. */
99417769
AV		 1493 int semi_count = ei_status.priv - offset;
1494 copyin(buf, base + offset, semi_count);
1da177e4 1495 buf += semi_count;
99417769 1496 offset = TX_PAGES<<8;
1da177e4
LT		 1497 count -= semi_count;
1498 }
99417769 1499 copyin(buf, base + offset, count);
1da177e4
LT		 1500}
1501
1502/*====================================================================*/
1503
1504static void shmem_block_output(struct net_device *dev, int count,
1505 const u_char *buf, const int start_page)
1506{
1507 void __iomem *shmem = ei_status.mem + (start_page << 8);
1508 shmem -= ei_status.tx_start_page << 8;
1509 copyout(shmem, buf, count);
1510}
1511
1512/*====================================================================*/
1513
1514static int setup_shmem_window(dev_link_t *link, int start_pg,
1515 int stop_pg, int cm_offset)
1516{
1517 struct net_device *dev = link->priv;
1518 pcnet_dev_t *info = PRIV(dev);
1519 win_req_t req;
1520 memreq_t mem;
1521 int i, window_size, offset, last_ret, last_fn;
1522
1523 window_size = (stop_pg - start_pg) << 8;
1524 if (window_size > 32 * 1024)
1525 window_size = 32 * 1024;
1526
1527 /* Make sure it's a power of two. */
1528 while ((window_size & (window_size - 1)) != 0)
1529 window_size += window_size & ~(window_size - 1);
1530
1531 /* Allocate a memory window */
1532 req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
1533 req.Attributes |= WIN_USE_WAIT;
1534 req.Base = 0; req.Size = window_size;
1535 req.AccessSpeed = mem_speed;
1536 CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &link->win));
1537
1538 mem.CardOffset = (start_pg << 8) + cm_offset;
1539 offset = mem.CardOffset % window_size;
1540 mem.CardOffset -= offset;
1541 mem.Page = 0;
1542 CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
1543
1544 /* Try scribbling on the buffer */
1545 info->base = ioremap(req.Base, window_size);
1546 for (i = 0; i < (TX_PAGES<<8); i += 2)
1547 __raw_writew((i>>1), info->base+offset+i);
1548 udelay(100);
1549 for (i = 0; i < (TX_PAGES<<8); i += 2)
1550 if (__raw_readw(info->base+offset+i) != (i>>1)) break;
1551 pcnet_reset_8390(dev);
1552 if (i != (TX_PAGES<<8)) {
1553 iounmap(info->base);
1554 pcmcia_release_window(link->win);
1555 info->base = NULL; link->win = NULL;
1556 goto failed;
1557 }
1558
1559 ei_status.mem = info->base + offset;
99417769 1560 ei_status.priv = req.Size;
1da177e4 1561 dev->mem_start = (u_long)ei_status.mem;
99417769 1562 dev->mem_end = dev->mem_start + req.Size;
1da177e4
LT		 1563
1564 ei_status.tx_start_page = start_pg;
1565 ei_status.rx_start_page = start_pg + TX_PAGES;
1566 ei_status.stop_page = start_pg + ((req.Size - offset) >> 8);
1567
1568 /* set up block i/o functions */
1569 ei_status.get_8390_hdr = &shmem_get_8390_hdr;
1570 ei_status.block_input = &shmem_block_input;
1571 ei_status.block_output = &shmem_block_output;
1572
1573 info->flags |= USE_SHMEM;
1574 return 0;
1575
1576cs_failed:
1577 cs_error(link->handle, last_fn, last_ret);
1578failed:
1579 return 1;
1580}
1581
1582/*====================================================================*/
1583
ce8a0037
DB		 1584static struct pcmcia_device_id pcnet_ids[] = {
1585 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021),
1586 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a),
1587 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15),
1588 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341),
1589 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
1590 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
1591 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
d277ad0e 1592 PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
ce8a0037
DB		 1593 PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
1594 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
1595 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
1596 PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
1597 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1598 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
1599 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
1600 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
1601 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
1602 PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
1603 PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
1604 PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004),
1605 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d),
1606 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075),
1607 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
1608 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
1609 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
1610/* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */
1611 PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
1612 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
1613 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
1614 PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
1615/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */
1616 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
1617 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
1618 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
1619 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
1620 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
1621 PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
1622 PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
1623 PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
1624 PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
1625 PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0),
1626 PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b),
1627 PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b),
1628 PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b),
1629 PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0),
1630 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82),
1631 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8),
1632 PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab),
1633 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
1634 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
1635 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
ce8a0037 1636 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
9c7046cd
JK		 1637 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
1638 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
ce8a0037
DB		 1639 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
1640 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
1641 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb),
1642 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247),
1643 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96),
1644 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1),
1645 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd),
1646 PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190),
1647 PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504),
1648 PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a),
1649 PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79),
1650 PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7),
1651 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a),
1652 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
1653 PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
1654 PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
1655 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
1656 PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
1657 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
1658 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
1659 PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
1660 PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
1661 PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
1662 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
1663 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
1664 PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0),
1665 PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf),
1666 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995),
1667 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233),
1668 PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
1669 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
1670 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
d277ad0e 1671 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
ce8a0037
DB		 1672 PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
1673 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
1674 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
1675 PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1),
1676 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1),
1677 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb),
1678 PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11),
1679 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6),
1680 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c),
1681 PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e),
1682 PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61),
1683 PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517),
1684 PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e),
1685 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb),
1686 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327),
1687 PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
1688 PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
1689 PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
d277ad0e 1690 PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
ce8a0037
DB		 1691 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
1692 PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
1693 PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
1694 PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64),
1695 PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5),
1696 PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3),
1697 PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2),
1698 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c),
1699 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40),
1700 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7),
9c7046cd 1701 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab),
ce8a0037
DB		 1702 PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78),
1703 PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11),
1704 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
1705 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
1706 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
d277ad0e 1707 PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
ce8a0037 1708 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
c96a34ec 1709 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
ce8a0037
DB		 1710 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
1711 PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
1712 PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
1713 PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
1714 PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4),
1715 PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8),
1716 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3),
1717 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c),
1718 PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6),
1719 PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472),
1720 PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7),
1721 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9),
1722 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
1723 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
1724 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
1725 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
1726 PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
9c7046cd 1727 PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
ce8a0037
DB		 1728 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
1729 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941),
1730 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b),
1731 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8),
1732 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0),
1733 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c),
1734 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8),
1735 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb),
1736 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4),
1737 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7),
1738 PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941),
1739 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641),
1740 PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1741 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b),
1742 PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1),
1743 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80),
1744 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
1745 PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
1746 PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
1747 PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
1748 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
1749 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
1750 PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388),
1751 PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c),
1752 PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941),
1753 PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265),
1754 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e),
1755 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8),
1756 PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa),
1757 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f),
9c7046cd 1758 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a),
ce8a0037
DB		 1759 PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e),
1760 PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0),
1761 PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e),
1762 PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89),
1763 PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
1764 PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
1765 PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
1766 PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
1767 PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
1768 PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
1769 /* too generic! */
1770 /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
1771 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
1772 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
1773 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
1774 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
1775 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
1776 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
1777 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
1778 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
1779 PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"),
1780 PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
1781 PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
1782 PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
1783 PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"),
1784 PCMCIA_DEVICE_NULL
1785};
1786MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
1787
1da177e4
LT		 1788static struct pcmcia_driver pcnet_driver = {
1789 .drv = {
1790 .name = "pcnet_cs",
1791 },
f8cfa618 1792 .probe = pcnet_probe,
cc3b4866 1793 .remove = pcnet_detach,
1da177e4 1794 .owner = THIS_MODULE,
ce8a0037 1795 .id_table = pcnet_ids,
98e4c28b
DB		 1796 .suspend = pcnet_suspend,
1797 .resume = pcnet_resume,
1da177e4
LT		 1798};
1799
1800static int __init init_pcnet_cs(void)
1801{
1802 return pcmcia_register_driver(&pcnet_driver);
1803}
1804
1805static void __exit exit_pcnet_cs(void)
1806{
1807 DEBUG(0, "pcnet_cs: unloading\n");
1808 pcmcia_unregister_driver(&pcnet_driver);
1da177e4
LT		 1809}
1810
1811module_init(init_pcnet_cs);
1812module_exit(exit_pcnet_cs);
Clone of davem's net-next-2.6 tree