]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/net/pcmcia/pcnet_cs.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[RT2x00]: add driver for Ralink wireless hardware
[net-next-2.6.git] / drivers / net / pcmcia / pcnet_cs.c
CommitLineData
1da177e4
LT		 1/*======================================================================
2
3 A PCMCIA ethernet driver for NS8390-based cards
4
5 This driver supports the D-Link DE-650 and Linksys EthernetCard
6 cards, the newer D-Link and Linksys combo cards, Accton EN2212
7 cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
8 mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
9 Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
10 mode. It will also handle the Socket EA card in either mode.
11
12 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
13
14 pcnet_cs.c 1.153 2003/11/09 18:53:09
6ed14254 15
1da177e4
LT		 16 The network driver code is based on Donald Becker's NE2000 code:
17
18 Written 1992,1993 by Donald Becker.
19 Copyright 1993 United States Government as represented by the
20 Director, National Security Agency. This software may be used and
21 distributed according to the terms of the GNU General Public License,
22 incorporated herein by reference.
23 Donald Becker may be reached at becker@scyld.com
24
25 Based also on Keith Moore's changes to Don Becker's code, for IBM
26 CCAE support. Drivers merged back together, and shared-memory
27 Socket EA support added, by Ken Raeburn, September 1995.
28
29======================================================================*/
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/init.h>
34#include <linux/ptrace.h>
35#include <linux/slab.h>
36#include <linux/string.h>
37#include <linux/timer.h>
38#include <linux/delay.h>
39#include <linux/ethtool.h>
40#include <linux/netdevice.h>
41#include <../drivers/net/8390.h>
42
1da177e4
LT		 43#include <pcmcia/cs_types.h>
44#include <pcmcia/cs.h>
45#include <pcmcia/cistpl.h>
46#include <pcmcia/ciscode.h>
47#include <pcmcia/ds.h>
48#include <pcmcia/cisreg.h>
49
50#include <asm/io.h>
51#include <asm/system.h>
52#include <asm/byteorder.h>
53#include <asm/uaccess.h>
54
55#define PCNET_CMD 0x00
56#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
57#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
58#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
59
60#define PCNET_START_PG 0x40 /* First page of TX buffer */
61#define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */
62
63/* Socket EA cards have a larger packet buffer */
64#define SOCKET_START_PG 0x01
65#define SOCKET_STOP_PG 0xff
66
67#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */
68
f71e1309 69static const char *if_names[] = { "auto", "10baseT", "10base2"};
1da177e4
LT		 70
71#ifdef PCMCIA_DEBUG
72static int pc_debug = PCMCIA_DEBUG;
73module_param(pc_debug, int, 0);
74#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
75static char *version =
76"pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)";
77#else
78#define DEBUG(n, args...)
79#endif
80
81/*====================================================================*/
82
83/* Module parameters */
84
85MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
86MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver");
87MODULE_LICENSE("GPL");
88
89#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
90
91INT_MODULE_PARM(if_port, 1); /* Transceiver type */
92INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */
93INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */
94INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */
95INT_MODULE_PARM(delay_time, 4); /* in usec */
96INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */
97INT_MODULE_PARM(full_duplex, 0); /* full duplex? */
98
99/* Ugh! Let the user hardwire the hardware address for queer cards */
100static int hw_addr[6] = { 0, /* ... */ };
101module_param_array(hw_addr, int, NULL, 0);
102
103/*====================================================================*/
104
105static void mii_phy_probe(struct net_device *dev);
15b99ac1 106static int pcnet_config(struct pcmcia_device *link);
fba395ee 107static void pcnet_release(struct pcmcia_device *link);
1da177e4
LT		 108static int pcnet_open(struct net_device *dev);
109static int pcnet_close(struct net_device *dev);
110static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
7282d491 111static const struct ethtool_ops netdev_ethtool_ops;
7d12e780 112static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
1da177e4
LT		 113static void ei_watchdog(u_long arg);
114static void pcnet_reset_8390(struct net_device *dev);
115static int set_config(struct net_device *dev, struct ifmap *map);
fba395ee 116static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
1da177e4 117 int stop_pg, int cm_offset);
fba395ee 118static int setup_dma_config(struct pcmcia_device *link, int start_pg,
1da177e4
LT		 119 int stop_pg);
120
cc3b4866 121static void pcnet_detach(struct pcmcia_device *p_dev);
1da177e4
LT		 122
123static dev_info_t dev_info = "pcnet_cs";
1da177e4
LT		 124
125/*====================================================================*/
126
127typedef struct hw_info_t {
128 u_int offset;
129 u_char a0, a1, a2;
130 u_int flags;
131} hw_info_t;
132
133#define DELAY_OUTPUT 0x01
134#define HAS_MISC_REG 0x02
135#define USE_BIG_BUF 0x04
136#define HAS_IBM_MISC 0x08
137#define IS_DL10019 0x10
138#define IS_DL10022 0x20
139#define HAS_MII 0x40
140#define USE_SHMEM 0x80 /* autodetected */
141
142#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */
143#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */
144#define MII_PHYID_REV_MASK 0xfffffff0
145#define MII_PHYID_REG1 0x02
146#define MII_PHYID_REG2 0x03
147
148static hw_info_t hw_info[] = {
6ed14254 149 { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
1da177e4
LT		 150 { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
151 { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
152 { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
153 DELAY_OUTPUT | HAS_IBM_MISC },
154 { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
155 { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
156 { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
157 { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
158 { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
159 { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
160 { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
161 HAS_MISC_REG | HAS_IBM_MISC },
162 { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
163 { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
164 { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
165 HAS_MISC_REG | HAS_IBM_MISC },
166 { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
167 HAS_MISC_REG | HAS_IBM_MISC },
168 { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
169 HAS_MISC_REG | HAS_IBM_MISC },
170 { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
171 HAS_MISC_REG | HAS_IBM_MISC },
172 { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
173 HAS_MISC_REG | HAS_IBM_MISC },
174 { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
175 HAS_MISC_REG | HAS_IBM_MISC },
176 { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
177 HAS_MISC_REG | HAS_IBM_MISC },
178 { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
179 HAS_MISC_REG | HAS_IBM_MISC },
180 { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
181 HAS_MISC_REG | HAS_IBM_MISC },
182 { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
183 HAS_MISC_REG | HAS_IBM_MISC },
184 { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
185 { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
186 { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
187 HAS_MISC_REG | HAS_IBM_MISC },
188 { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
189 HAS_MISC_REG | HAS_IBM_MISC },
190 { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
191 { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
192 { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
193 { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
194 { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
195 HAS_MISC_REG | HAS_IBM_MISC },
6ed14254 196 { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
1da177e4
LT		 197 HAS_MISC_REG | HAS_IBM_MISC },
198 { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
199 { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
200 { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
201 { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
202 DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
203 { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
204 { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
205 { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
206 { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
207 { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
208};
209
ff8ac609 210#define NR_INFO ARRAY_SIZE(hw_info)
1da177e4
LT		 211
212static hw_info_t default_info = { 0, 0, 0, 0, 0 };
213static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII };
214static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
215
216typedef struct pcnet_dev_t {
fd238232 217 struct pcmcia_device *p_dev;
1da177e4
LT		 218 dev_node_t node;
219 u_int flags;
220 void __iomem *base;
221 struct timer_list watchdog;
222 int stale, fast_poll;
223 u_char phy_id;
224 u_char eth_phy, pna_phy;
225 u_short link_status;
226 u_long mii_reset;
227} pcnet_dev_t;
228
229static inline pcnet_dev_t *PRIV(struct net_device *dev)
230{
231 char *p = netdev_priv(dev);
232 return (pcnet_dev_t *)(p + sizeof(struct ei_device));
233}
234
235/*======================================================================
236
237 pcnet_attach() creates an "instance" of the driver, allocating
238 local data structures for one device. The device is registered
239 with Card Services.
240
241======================================================================*/
242
fba395ee 243static int pcnet_probe(struct pcmcia_device *link)
1da177e4
LT		 244{
245 pcnet_dev_t *info;
1da177e4 246 struct net_device *dev;
1da177e4
LT		 247
248 DEBUG(0, "pcnet_attach()\n");
249
250 /* Create new ethernet device */
251 dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
f8cfa618 252 if (!dev) return -ENOMEM;
1da177e4 253 info = PRIV(dev);
fba395ee 254 info->p_dev = link;
1da177e4
LT		 255 link->priv = dev;
256
257 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
258 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
259 link->conf.Attributes = CONF_ENABLE_IRQ;
260 link->conf.IntType = INT_MEMORY_AND_IO;
261
1da177e4
LT		 262 dev->open = &pcnet_open;
263 dev->stop = &pcnet_close;
264 dev->set_config = &set_config;
265
15b99ac1 266 return pcnet_config(link);
1da177e4
LT		 267} /* pcnet_attach */
268
269/*======================================================================
270
271 This deletes a driver "instance". The device is de-registered
272 with Card Services. If it has been released, all local data
273 structures are freed. Otherwise, the structures will be freed
274 when the device is released.
275
276======================================================================*/
277
fba395ee 278static void pcnet_detach(struct pcmcia_device *link)
1da177e4 279{
cc3b4866 280 struct net_device *dev = link->priv;
1da177e4 281
cc3b4866 282 DEBUG(0, "pcnet_detach(0x%p)\n", link);
1da177e4 283
fd238232 284 if (link->dev_node)
cc3b4866 285 unregister_netdev(dev);
1da177e4 286
e2d40963 287 pcnet_release(link);
1da177e4 288
cc3b4866 289 free_netdev(dev);
1da177e4
LT		 290} /* pcnet_detach */
291
292/*======================================================================
293
294 This probes for a card's hardware address, for card types that
295 encode this information in their CIS.
296
297======================================================================*/
298
fba395ee 299static hw_info_t *get_hwinfo(struct pcmcia_device *link)
1da177e4
LT		 300{
301 struct net_device *dev = link->priv;
302 win_req_t req;
303 memreq_t mem;
304 u_char __iomem *base, *virt;
305 int i, j;
306
307 /* Allocate a small memory window */
308 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
309 req.Base = 0; req.Size = 0;
310 req.AccessSpeed = 0;
fba395ee 311 i = pcmcia_request_window(&link, &req, &link->win);
1da177e4 312 if (i != CS_SUCCESS) {
fba395ee 313 cs_error(link, RequestWindow, i);
1da177e4
LT		 314 return NULL;
315 }
316
317 virt = ioremap(req.Base, req.Size);
318 mem.Page = 0;
319 for (i = 0; i < NR_INFO; i++) {
320 mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
321 pcmcia_map_mem_page(link->win, &mem);
322 base = &virt[hw_info[i].offset & (req.Size-1)];
323 if ((readb(base+0) == hw_info[i].a0) &&
324 (readb(base+2) == hw_info[i].a1) &&
325 (readb(base+4) == hw_info[i].a2))
326 break;
327 }
328 if (i < NR_INFO) {
329 for (j = 0; j < 6; j++)
330 dev->dev_addr[j] = readb(base + (j<<1));
331 }
6ed14254 332
1da177e4
LT		 333 iounmap(virt);
334 j = pcmcia_release_window(link->win);
335 if (j != CS_SUCCESS)
fba395ee 336 cs_error(link, ReleaseWindow, j);
1da177e4
LT		 337 return (i < NR_INFO) ? hw_info+i : NULL;
338} /* get_hwinfo */
339
340/*======================================================================
341
342 This probes for a card's hardware address by reading the PROM.
343 It checks the address against a list of known types, then falls
344 back to a simple NE2000 clone signature check.
345
346======================================================================*/
347
fba395ee 348static hw_info_t *get_prom(struct pcmcia_device *link)
1da177e4
LT		 349{
350 struct net_device *dev = link->priv;
351 kio_addr_t ioaddr = dev->base_addr;
352 u_char prom[32];
353 int i, j;
354
355 /* This is lifted straight from drivers/net/ne.c */
356 struct {
357 u_char value, offset;
358 } program_seq[] = {
359 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
360 {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
361 {0x00, EN0_RCNTLO}, /* Clear the count regs. */
362 {0x00, EN0_RCNTHI},
363 {0x00, EN0_IMR}, /* Mask completion irq. */
364 {0xFF, EN0_ISR},
365 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
366 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
367 {32, EN0_RCNTLO},
368 {0x00, EN0_RCNTHI},
369 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
370 {0x00, EN0_RSARHI},
371 {E8390_RREAD+E8390_START, E8390_CMD},
372 };
373
374 pcnet_reset_8390(dev);
375 mdelay(10);
376
ff8ac609 377 for (i = 0; i < ARRAY_SIZE(program_seq); i++)
1da177e4
LT		 378 outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
379
380 for (i = 0; i < 32; i++)
381 prom[i] = inb(ioaddr + PCNET_DATAPORT);
382 for (i = 0; i < NR_INFO; i++) {
383 if ((prom[0] == hw_info[i].a0) &&
384 (prom[2] == hw_info[i].a1) &&
385 (prom[4] == hw_info[i].a2))
386 break;
387 }
388 if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
389 for (j = 0; j < 6; j++)
390 dev->dev_addr[j] = prom[j<<1];
391 return (i < NR_INFO) ? hw_info+i : &default_info;
392 }
393 return NULL;
394} /* get_prom */
395
396/*======================================================================
397
398 For DL10019 based cards, like the Linksys EtherFast
399
400======================================================================*/
401
fba395ee 402static hw_info_t *get_dl10019(struct pcmcia_device *link)
1da177e4
LT		 403{
404 struct net_device *dev = link->priv;
405 int i;
406 u_char sum;
407
408 for (sum = 0, i = 0x14; i < 0x1c; i++)
409 sum += inb_p(dev->base_addr + i);
410 if (sum != 0xff)
411 return NULL;
412 for (i = 0; i < 6; i++)
413 dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i);
414 i = inb(dev->base_addr + 0x1f);
415 return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info;
416}
417
418/*======================================================================
419
420 For Asix AX88190 based cards
421
422======================================================================*/
423
fba395ee 424static hw_info_t *get_ax88190(struct pcmcia_device *link)
1da177e4
LT		 425{
426 struct net_device *dev = link->priv;
427 kio_addr_t ioaddr = dev->base_addr;
428 int i, j;
429
430 /* Not much of a test, but the alternatives are messy */
431 if (link->conf.ConfigBase != 0x03c0)
432 return NULL;
433
434 outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */
435 outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */
436 outb_p(0x04, ioaddr + EN0_RSARHI);
437 outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD);
438
439 for (i = 0; i < 6; i += 2) {
440 j = inw(ioaddr + PCNET_DATAPORT);
441 dev->dev_addr[i] = j & 0xff;
442 dev->dev_addr[i+1] = j >> 8;
443 }
444 printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n");
445 printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n");
446 return NULL;
447}
448
449/*======================================================================
450
451 This should be totally unnecessary... but when we can't figure
452 out the hardware address any other way, we'll let the user hard
453 wire it when the module is initialized.
454
455======================================================================*/
456
fba395ee 457static hw_info_t *get_hwired(struct pcmcia_device *link)
1da177e4
LT		 458{
459 struct net_device *dev = link->priv;
460 int i;
461
462 for (i = 0; i < 6; i++)
463 if (hw_addr[i] != 0) break;
464 if (i == 6)
465 return NULL;
466
467 for (i = 0; i < 6; i++)
468 dev->dev_addr[i] = hw_addr[i];
469
470 return &default_info;
471} /* get_hwired */
472
473/*======================================================================
474
475 pcnet_config() is scheduled to run after a CARD_INSERTION event
476 is received, to configure the PCMCIA socket, and to make the
477 ethernet device available to the system.
478
479======================================================================*/
480
481#define CS_CHECK(fn, ret) \
482do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
483
fba395ee 484static int try_io_port(struct pcmcia_device *link)
1da177e4
LT		 485{
486 int j, ret;
487 if (link->io.NumPorts1 == 32) {
488 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
489 if (link->io.NumPorts2 > 0) {
490 /* for master/slave multifunction cards */
491 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
6ed14254 492 link->irq.Attributes =
1da177e4
LT		 493 IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
494 }
495 } else {
496 /* This should be two 16-port windows */
497 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
498 link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
499 }
500 if (link->io.BasePort1 == 0) {
501 link->io.IOAddrLines = 16;
502 for (j = 0; j < 0x400; j += 0x20) {
503 link->io.BasePort1 = j ^ 0x300;
504 link->io.BasePort2 = (j ^ 0x300) + 0x10;
fba395ee 505 ret = pcmcia_request_io(link, &link->io);
1da177e4
LT		 506 if (ret == CS_SUCCESS) return ret;
507 }
508 return ret;
509 } else {
fba395ee 510 return pcmcia_request_io(link, &link->io);
1da177e4
LT		 511 }
512}
513
15b99ac1 514static int pcnet_config(struct pcmcia_device *link)
1da177e4 515{
1da177e4
LT		 516 struct net_device *dev = link->priv;
517 pcnet_dev_t *info = PRIV(dev);
518 tuple_t tuple;
519 cisparse_t parse;
520 int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
efd50585 521 int has_shmem = 0;
1da177e4 522 u_short buf[64];
1da177e4
LT		 523 hw_info_t *hw_info;
524
525 DEBUG(0, "pcnet_config(0x%p)\n", link);
526
1da177e4
LT		 527 tuple.TupleData = (cisdata_t *)buf;
528 tuple.TupleDataMax = sizeof(buf);
529 tuple.TupleOffset = 0;
1da177e4
LT		 530 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
531 tuple.Attributes = 0;
fba395ee 532 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
1da177e4
LT		 533 while (last_ret == CS_SUCCESS) {
534 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
535 cistpl_io_t *io = &(parse.cftable_entry.io);
6ed14254 536
fba395ee
DB		 537 if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
538 pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
1da177e4
LT		 539 cfg->index == 0 || cfg->io.nwin == 0)
540 goto next_entry;
6ed14254 541
1da177e4
LT		 542 link->conf.ConfigIndex = cfg->index;
543 /* For multifunction cards, by convention, we configure the
544 network function with window 0, and serial with window 1 */
545 if (io->nwin > 1) {
546 i = (io->win[1].len > io->win[0].len);
547 link->io.BasePort2 = io->win[1-i].base;
548 link->io.NumPorts2 = io->win[1-i].len;
549 } else {
550 i = link->io.NumPorts2 = 0;
551 }
552 has_shmem = ((cfg->mem.nwin == 1) &&
553 (cfg->mem.win[0].len >= 0x4000));
554 link->io.BasePort1 = io->win[i].base;
555 link->io.NumPorts1 = io->win[i].len;
556 link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
557 if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
558 last_ret = try_io_port(link);
559 if (last_ret == CS_SUCCESS) break;
560 }
561 next_entry:
fba395ee 562 last_ret = pcmcia_get_next_tuple(link, &tuple);
1da177e4
LT		 563 }
564 if (last_ret != CS_SUCCESS) {
fba395ee 565 cs_error(link, RequestIO, last_ret);
1da177e4
LT		 566 goto failed;
567 }
568
fba395ee 569 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
6ed14254 570
1da177e4
LT		 571 if (link->io.NumPorts2 == 8) {
572 link->conf.Attributes |= CONF_ENABLE_SPKR;
573 link->conf.Status = CCSR_AUDIO_ENA;
574 }
efd50585
DB		 575 if ((link->manf_id == MANFID_IBM) &&
576 (link->card_id == PRODID_IBM_HOME_AND_AWAY))
1da177e4 577 link->conf.ConfigIndex |= 0x10;
6ed14254 578
fba395ee 579 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
1da177e4
LT		 580 dev->irq = link->irq.AssignedIRQ;
581 dev->base_addr = link->io.BasePort1;
582 if (info->flags & HAS_MISC_REG) {
583 if ((if_port == 1) || (if_port == 2))
584 dev->if_port = if_port;
585 else
586 printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
587 } else {
588 dev->if_port = 0;
589 }
590
591 hw_info = get_hwinfo(link);
592 if (hw_info == NULL)
593 hw_info = get_prom(link);
594 if (hw_info == NULL)
595 hw_info = get_dl10019(link);
596 if (hw_info == NULL)
597 hw_info = get_ax88190(link);
598 if (hw_info == NULL)
599 hw_info = get_hwired(link);
6ed14254 600
1da177e4
LT		 601 if (hw_info == NULL) {
602 printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
603 " address for io base %#3lx\n", dev->base_addr);
604 goto failed;
605 }
606
607 info->flags = hw_info->flags;
608 /* Check for user overrides */
609 info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
efd50585
DB		 610 if ((link->manf_id == MANFID_SOCKET) &&
611 ((link->card_id == PRODID_SOCKET_LPE) ||
612 (link->card_id == PRODID_SOCKET_LPE_CF) ||
613 (link->card_id == PRODID_SOCKET_EIO)))
1da177e4
LT		 614 info->flags &= ~USE_BIG_BUF;
615 if (!use_big_buf)
616 info->flags &= ~USE_BIG_BUF;
6ed14254 617
1da177e4
LT		 618 if (info->flags & USE_BIG_BUF) {
619 start_pg = SOCKET_START_PG;
620 stop_pg = SOCKET_STOP_PG;
621 cm_offset = 0x10000;
622 } else {
623 start_pg = PCNET_START_PG;
624 stop_pg = PCNET_STOP_PG;
625 cm_offset = 0;
626 }
627
628 /* has_shmem is ignored if use_shmem != -1 */
629 if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) ||
630 (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0))
631 setup_dma_config(link, start_pg, stop_pg);
632
633 ei_status.name = "NE2000";
634 ei_status.word16 = 1;
635 ei_status.reset_8390 = &pcnet_reset_8390;
636
637 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
638
639 if (info->flags & (IS_DL10019|IS_DL10022)) {
1da177e4
LT		 640 dev->do_ioctl = &ei_ioctl;
641 mii_phy_probe(dev);
1da177e4
LT		 642 }
643
fd238232 644 link->dev_node = &info->node;
fba395ee 645 SET_NETDEV_DEV(dev, &handle_to_dev(link));
1da177e4
LT		 646
647#ifdef CONFIG_NET_POLL_CONTROLLER
648 dev->poll_controller = ei_poll;
649#endif
650
651 if (register_netdev(dev) != 0) {
652 printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
fd238232 653 link->dev_node = NULL;
1da177e4
LT		 654 goto failed;
655 }
656
657 strcpy(info->node.dev_name, dev->name);
658
659 if (info->flags & (IS_DL10019|IS_DL10022)) {
660 u_char id = inb(dev->base_addr + 0x1a);
661 printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ",
662 dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id);
663 if (info->pna_phy)
664 printk("PNA, ");
665 } else {
666 printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name);
667 }
668 printk("io %#3lx, irq %d,", dev->base_addr, dev->irq);
669 if (info->flags & USE_SHMEM)
670 printk (" mem %#5lx,", dev->mem_start);
671 if (info->flags & HAS_MISC_REG)
672 printk(" %s xcvr,", if_names[dev->if_port]);
673 printk(" hw_addr ");
674 for (i = 0; i < 6; i++)
675 printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
15b99ac1 676 return 0;
1da177e4
LT		 677
678cs_failed:
fba395ee 679 cs_error(link, last_fn, last_ret);
1da177e4
LT		 680failed:
681 pcnet_release(link);
15b99ac1 682 return -ENODEV;
1da177e4
LT		 683} /* pcnet_config */
684
685/*======================================================================
686
687 After a card is removed, pcnet_release() will unregister the net
688 device, and release the PCMCIA configuration. If the device is
689 still open, this will be postponed until it is closed.
690
691======================================================================*/
692
fba395ee 693static void pcnet_release(struct pcmcia_device *link)
1da177e4 694{
5f2a71fc 695 pcnet_dev_t *info = PRIV(link->priv);
1da177e4 696
5f2a71fc 697 DEBUG(0, "pcnet_release(0x%p)\n", link);
1da177e4 698
5f2a71fc
DB		 699 if (info->flags & USE_SHMEM)
700 iounmap(info->base);
1da177e4 701
fba395ee 702 pcmcia_disable_device(link);
1da177e4
LT		 703}
704
705/*======================================================================
706
707 The card status event handler. Mostly, this schedules other
708 stuff to run after an event is received. A CARD_REMOVAL event
709 also sets some flags to discourage the net drivers from trying
710 to talk to the card any more.
711
712======================================================================*/
713
fba395ee 714static int pcnet_suspend(struct pcmcia_device *link)
98e4c28b 715{
98e4c28b
DB		 716 struct net_device *dev = link->priv;
717
e2d40963 718 if (link->open)
8661bb5b 719 netif_device_detach(dev);
98e4c28b
DB		 720
721 return 0;
722}
723
fba395ee 724static int pcnet_resume(struct pcmcia_device *link)
98e4c28b 725{
98e4c28b
DB		 726 struct net_device *dev = link->priv;
727
e2d40963 728 if (link->open) {
8661bb5b
DB		 729 pcnet_reset_8390(dev);
730 NS8390_init(dev, 1);
731 netif_device_attach(dev);
98e4c28b
DB		 732 }
733
734 return 0;
735}
736
1da177e4
LT		 737
738/*======================================================================
739
740 MII interface support for DL10019 and DL10022 based cards
741
742 On the DL10019, the MII IO direction bit is 0x10; on the DL10022
743 it is 0x20. Setting both bits seems to work on both card types.
744
745======================================================================*/
746
747#define DLINK_GPIO 0x1c
748#define DLINK_DIAG 0x1d
749#define DLINK_EEPROM 0x1e
750
751#define MDIO_SHIFT_CLK 0x80
752#define MDIO_DATA_OUT 0x40
753#define MDIO_DIR_WRITE 0x30
754#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
755#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
756#define MDIO_DATA_READ 0x10
757#define MDIO_MASK 0x0f
758
759static void mdio_sync(kio_addr_t addr)
760{
761 int bits, mask = inb(addr) & MDIO_MASK;
762 for (bits = 0; bits < 32; bits++) {
763 outb(mask | MDIO_DATA_WRITE1, addr);
764 outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
765 }
766}
767
768static int mdio_read(kio_addr_t addr, int phy_id, int loc)
769{
770 u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
771 int i, retval = 0, mask = inb(addr) & MDIO_MASK;
772
773 mdio_sync(addr);
774 for (i = 13; i >= 0; i--) {
775 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
776 outb(mask | dat, addr);
777 outb(mask | dat | MDIO_SHIFT_CLK, addr);
778 }
779 for (i = 19; i > 0; i--) {
780 outb(mask, addr);
781 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
782 outb(mask | MDIO_SHIFT_CLK, addr);
783 }
784 return (retval>>1) & 0xffff;
785}
786
787static void mdio_write(kio_addr_t addr, int phy_id, int loc, int value)
788{
789 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
790 int i, mask = inb(addr) & MDIO_MASK;
791
792 mdio_sync(addr);
793 for (i = 31; i >= 0; i--) {
794 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
795 outb(mask | dat, addr);
796 outb(mask | dat | MDIO_SHIFT_CLK, addr);
797 }
798 for (i = 1; i >= 0; i--) {
799 outb(mask, addr);
800 outb(mask | MDIO_SHIFT_CLK, addr);
801 }
802}
803
1da177e4
LT		 804/*======================================================================
805
806 EEPROM access routines for DL10019 and DL10022 based cards
807
808======================================================================*/
809
810#define EE_EEP 0x40
811#define EE_ASIC 0x10
812#define EE_CS 0x08
813#define EE_CK 0x04
814#define EE_DO 0x02
815#define EE_DI 0x01
816#define EE_ADOT 0x01 /* DataOut for ASIC */
817#define EE_READ_CMD 0x06
818
819#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */
820
821static int read_eeprom(kio_addr_t ioaddr, int location)
822{
823 int i, retval = 0;
824 kio_addr_t ee_addr = ioaddr + DLINK_EEPROM;
825 int read_cmd = location | (EE_READ_CMD << 8);
826
827 outb(0, ee_addr);
828 outb(EE_EEP|EE_CS, ee_addr);
829
830 /* Shift the read command bits out. */
831 for (i = 10; i >= 0; i--) {
832 short dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
833 outb_p(EE_EEP|EE_CS|dataval, ee_addr);
834 outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr);
835 }
836 outb(EE_EEP|EE_CS, ee_addr);
837
838 for (i = 16; i > 0; i--) {
839 outb_p(EE_EEP|EE_CS | EE_CK, ee_addr);
840 retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0);
841 outb_p(EE_EEP|EE_CS, ee_addr);
842 }
843
844 /* Terminate the EEPROM access. */
845 outb(0, ee_addr);
846 return retval;
847}
848
849/*
850 The internal ASIC registers can be changed by EEPROM READ access
851 with EE_ASIC bit set.
852 In ASIC mode, EE_ADOT is used to output the data to the ASIC.
853*/
854
855static void write_asic(kio_addr_t ioaddr, int location, short asic_data)
856{
857 int i;
858 kio_addr_t ee_addr = ioaddr + DLINK_EEPROM;
859 short dataval;
860 int read_cmd = location | (EE_READ_CMD << 8);
861
862 asic_data |= read_eeprom(ioaddr, location);
863
864 outb(0, ee_addr);
865 outb(EE_ASIC|EE_CS|EE_DI, ee_addr);
866
867 read_cmd = read_cmd >> 1;
868
869 /* Shift the read command bits out. */
870 for (i = 9; i >= 0; i--) {
871 dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
872 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
873 outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr);
874 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
875 }
876 // sync
877 outb(EE_ASIC|EE_CS, ee_addr);
878 outb(EE_ASIC|EE_CS|EE_CK, ee_addr);
879 outb(EE_ASIC|EE_CS, ee_addr);
880
881 for (i = 15; i >= 0; i--) {
882 dataval = (asic_data & (1 << i)) ? EE_ADOT : 0;
883 outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
884 outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr);
885 outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
886 }
887
888 /* Terminate the ASIC access. */
889 outb(EE_ASIC|EE_DI, ee_addr);
890 outb(EE_ASIC|EE_DI| EE_CK, ee_addr);
891 outb(EE_ASIC|EE_DI, ee_addr);
892
893 outb(0, ee_addr);
894}
895
896/*====================================================================*/
897
898static void set_misc_reg(struct net_device *dev)
899{
900 kio_addr_t nic_base = dev->base_addr;
901 pcnet_dev_t *info = PRIV(dev);
902 u_char tmp;
6ed14254 903
1da177e4
LT		 904 if (info->flags & HAS_MISC_REG) {
905 tmp = inb_p(nic_base + PCNET_MISC) & ~3;
906 if (dev->if_port == 2)
907 tmp |= 1;
908 if (info->flags & USE_BIG_BUF)
909 tmp |= 2;
910 if (info->flags & HAS_IBM_MISC)
911 tmp |= 8;
912 outb_p(tmp, nic_base + PCNET_MISC);
913 }
914 if (info->flags & IS_DL10022) {
915 if (info->flags & HAS_MII) {
fcf194d1
K		 916 /* Advertise 100F, 100H, 10F, 10H */
917 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
1da177e4
LT		 918 /* Restart MII autonegotiation */
919 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
920 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
921 info->mii_reset = jiffies;
922 } else {
923 outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
924 }
d89a64be
K		 925 } else if (info->flags & IS_DL10019) {
926 /* Advertise 100F, 100H, 10F, 10H */
927 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
928 /* Restart MII autonegotiation */
929 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
930 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
1da177e4
LT		 931 }
932}
933
934/*====================================================================*/
935
936static void mii_phy_probe(struct net_device *dev)
937{
938 pcnet_dev_t *info = PRIV(dev);
939 kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO;
940 int i;
941 u_int tmp, phyid;
942
943 for (i = 31; i >= 0; i--) {
944 tmp = mdio_read(mii_addr, i, 1);
945 if ((tmp == 0) || (tmp == 0xffff))
946 continue;
947 tmp = mdio_read(mii_addr, i, MII_PHYID_REG1);
948 phyid = tmp << 16;
949 phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
950 phyid &= MII_PHYID_REV_MASK;
951 DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
952 if (phyid == AM79C9XX_HOME_PHY) {
953 info->pna_phy = i;
954 } else if (phyid != AM79C9XX_ETH_PHY) {
955 info->eth_phy = i;
956 }
957 }
958}
959
960static int pcnet_open(struct net_device *dev)
961{
59b34c12 962 int ret;
1da177e4 963 pcnet_dev_t *info = PRIV(dev);
fba395ee 964 struct pcmcia_device *link = info->p_dev;
fd238232 965
1da177e4
LT		 966 DEBUG(2, "pcnet_open('%s')\n", dev->name);
967
9940ec36 968 if (!pcmcia_dev_present(link))
1da177e4
LT		 969 return -ENODEV;
970
1da177e4 971 set_misc_reg(dev);
59b34c12
YY		 972 ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
973 if (ret)
974 return ret;
975
976 link->open++;
1da177e4
LT		 977
978 info->phy_id = info->eth_phy;
979 info->link_status = 0x00;
980 init_timer(&info->watchdog);
981 info->watchdog.function = &ei_watchdog;
982 info->watchdog.data = (u_long)dev;
983 info->watchdog.expires = jiffies + HZ;
984 add_timer(&info->watchdog);
985
986 return ei_open(dev);
987} /* pcnet_open */
988
989/*====================================================================*/
990
991static int pcnet_close(struct net_device *dev)
992{
993 pcnet_dev_t *info = PRIV(dev);
fba395ee 994 struct pcmcia_device *link = info->p_dev;
1da177e4
LT		 995
996 DEBUG(2, "pcnet_close('%s')\n", dev->name);
997
998 ei_close(dev);
999 free_irq(dev->irq, dev);
6ed14254 1000
1da177e4
LT		 1001 link->open--;
1002 netif_stop_queue(dev);
1003 del_timer_sync(&info->watchdog);
1004
1005 return 0;
1006} /* pcnet_close */
1007
1008/*======================================================================
1009
1010 Hard reset the card. This used to pause for the same period that
1011 a 8390 reset command required, but that shouldn't be necessary.
1012
1013======================================================================*/
1014
1015static void pcnet_reset_8390(struct net_device *dev)
1016{
1017 kio_addr_t nic_base = dev->base_addr;
1018 int i;
1019
1020 ei_status.txing = ei_status.dmaing = 0;
1021
1022 outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
1023
1024 outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET);
1025
1026 for (i = 0; i < 100; i++) {
1027 if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
1028 break;
1029 udelay(100);
1030 }
1031 outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
6ed14254 1032
1da177e4
LT		 1033 if (i == 100)
1034 printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n",
1035 dev->name);
1036 set_misc_reg(dev);
6ed14254 1037
1da177e4
LT		 1038} /* pcnet_reset_8390 */
1039
1040/*====================================================================*/
1041
1042static int set_config(struct net_device *dev, struct ifmap *map)
1043{
1044 pcnet_dev_t *info = PRIV(dev);
1045 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
1046 if (!(info->flags & HAS_MISC_REG))
1047 return -EOPNOTSUPP;
1048 else if ((map->port < 1) || (map->port > 2))
1049 return -EINVAL;
1050 dev->if_port = map->port;
1051 printk(KERN_INFO "%s: switched to %s port\n",
1052 dev->name, if_names[dev->if_port]);
1053 NS8390_init(dev, 1);
1054 }
1055 return 0;
1056}
1057
1058/*====================================================================*/
1059
7d12e780 1060static irqreturn_t ei_irq_wrapper(int irq, void *dev_id)
1da177e4
LT		 1061{
1062 struct net_device *dev = dev_id;
93ad4fb0 1063 pcnet_dev_t *info;
7d12e780 1064 irqreturn_t ret = ei_interrupt(irq, dev_id);
1da177e4 1065
93ad4fb0
AM		 1066 if (ret == IRQ_HANDLED) {
1067 info = PRIV(dev);
1da177e4 1068 info->stale = 0;
93ad4fb0 1069 }
1da177e4
LT		 1070 return ret;
1071}
1072
1073static void ei_watchdog(u_long arg)
1074{
1075 struct net_device *dev = (struct net_device *)arg;
1076 pcnet_dev_t *info = PRIV(dev);
1077 kio_addr_t nic_base = dev->base_addr;
1078 kio_addr_t mii_addr = nic_base + DLINK_GPIO;
1079 u_short link;
1080
1081 if (!netif_device_present(dev)) goto reschedule;
1082
1083 /* Check for pending interrupt with expired latency timer: with
1084 this, we can limp along even if the interrupt is blocked */
1da177e4
LT		 1085 if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
1086 if (!info->fast_poll)
1087 printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
7d12e780 1088 ei_irq_wrapper(dev->irq, dev);
1da177e4
LT		 1089 info->fast_poll = HZ;
1090 }
1091 if (info->fast_poll) {
1092 info->fast_poll--;
1093 info->watchdog.expires = jiffies + 1;
1094 add_timer(&info->watchdog);
1095 return;
1096 }
1097
1098 if (!(info->flags & HAS_MII))
1099 goto reschedule;
1100
1101 mdio_read(mii_addr, info->phy_id, 1);
1102 link = mdio_read(mii_addr, info->phy_id, 1);
1103 if (!link || (link == 0xffff)) {
1104 if (info->eth_phy) {
1105 info->phy_id = info->eth_phy = 0;
1106 } else {
1107 printk(KERN_INFO "%s: MII is missing!\n", dev->name);
1108 info->flags &= ~HAS_MII;
1109 }
1110 goto reschedule;
1111 }
1112
1113 link &= 0x0004;
1114 if (link != info->link_status) {
1115 u_short p = mdio_read(mii_addr, info->phy_id, 5);
1116 printk(KERN_INFO "%s: %s link beat\n", dev->name,
1117 (link) ? "found" : "lost");
1118 if (link && (info->flags & IS_DL10022)) {
1119 /* Disable collision detection on full duplex links */
1120 outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
1121 } else if (link && (info->flags & IS_DL10019)) {
1122 /* Disable collision detection on full duplex links */
1123 write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0);
1124 }
1125 if (link) {
1126 if (info->phy_id == info->eth_phy) {
1127 if (p)
1128 printk(KERN_INFO "%s: autonegotiation complete: "
1129 "%sbaseT-%cD selected\n", dev->name,
1130 ((p & 0x0180) ? "100" : "10"),
1131 ((p & 0x0140) ? 'F' : 'H'));
1132 else
1133 printk(KERN_INFO "%s: link partner did not "
1134 "autonegotiate\n", dev->name);
1135 }
1136 NS8390_init(dev, 1);
1137 }
1138 info->link_status = link;
1139 }
1140 if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) {
1141 link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004;
1142 if (((info->phy_id == info->pna_phy) && link) ||
1143 ((info->phy_id != info->pna_phy) && !link)) {
1144 /* isolate this MII and try flipping to the other one */
1145 mdio_write(mii_addr, info->phy_id, 0, 0x0400);
1146 info->phy_id ^= info->pna_phy ^ info->eth_phy;
1147 printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name,
1148 (info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
1149 mdio_write(mii_addr, info->phy_id, 0,
1150 (info->phy_id == info->eth_phy) ? 0x1000 : 0);
1151 info->link_status = 0;
1152 info->mii_reset = jiffies;
1153 }
1154 }
1155
1156reschedule:
1157 info->watchdog.expires = jiffies + HZ;
1158 add_timer(&info->watchdog);
1159}
1160
1161/*====================================================================*/
1162
1163static void netdev_get_drvinfo(struct net_device *dev,
1164 struct ethtool_drvinfo *info)
1165{
1166 strcpy(info->driver, "pcnet_cs");
1167}
1168
7282d491 1169static const struct ethtool_ops netdev_ethtool_ops = {
1da177e4
LT		 1170 .get_drvinfo = netdev_get_drvinfo,
1171};
1172
1173/*====================================================================*/
1174
1175
1176static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1177{
1178 pcnet_dev_t *info = PRIV(dev);
1179 u16 *data = (u16 *)&rq->ifr_ifru;
1180 kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO;
1181 switch (cmd) {
1182 case SIOCGMIIPHY:
1183 data[0] = info->phy_id;
1184 case SIOCGMIIREG: /* Read MII PHY register. */
1185 data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f);
1186 return 0;
1187 case SIOCSMIIREG: /* Write MII PHY register. */
1188 if (!capable(CAP_NET_ADMIN))
1189 return -EPERM;
1190 mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]);
1191 return 0;
1192 }
1193 return -EOPNOTSUPP;
1194}
1195
1196/*====================================================================*/
1197
1198static void dma_get_8390_hdr(struct net_device *dev,
1199 struct e8390_pkt_hdr *hdr,
1200 int ring_page)
1201{
1202 kio_addr_t nic_base = dev->base_addr;
1203
1204 if (ei_status.dmaing) {
1205 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
1206 "[DMAstat:%1x][irqlock:%1x]\n",
1207 dev->name, ei_status.dmaing, ei_status.irqlock);
1208 return;
1209 }
6ed14254 1210
1da177e4
LT		 1211 ei_status.dmaing |= 0x01;
1212 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1213 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
1214 outb_p(0, nic_base + EN0_RCNTHI);
1215 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
1216 outb_p(ring_page, nic_base + EN0_RSARHI);
1217 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1218
1219 insw(nic_base + PCNET_DATAPORT, hdr,
1220 sizeof(struct e8390_pkt_hdr)>>1);
1221 /* Fix for big endian systems */
1222 hdr->count = le16_to_cpu(hdr->count);
1223
1224 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1225 ei_status.dmaing &= ~0x01;
1226}
1227
1228/*====================================================================*/
1229
1230static void dma_block_input(struct net_device *dev, int count,
1231 struct sk_buff *skb, int ring_offset)
1232{
1233 kio_addr_t nic_base = dev->base_addr;
1234 int xfer_count = count;
1235 char *buf = skb->data;
1236
1237#ifdef PCMCIA_DEBUG
1238 if ((ei_debug > 4) && (count != 4))
1239 printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
1240#endif
1241 if (ei_status.dmaing) {
1242 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
1243 "[DMAstat:%1x][irqlock:%1x]\n",
1244 dev->name, ei_status.dmaing, ei_status.irqlock);
1245 return;
1246 }
1247 ei_status.dmaing |= 0x01;
1248 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1249 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1250 outb_p(count >> 8, nic_base + EN0_RCNTHI);
1251 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
1252 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
1253 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1254
1255 insw(nic_base + PCNET_DATAPORT,buf,count>>1);
1256 if (count & 0x01)
1257 buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
1258
93ad4fb0 1259 /* This was for the ALPHA version only, but enough people have been
1da177e4
LT		 1260 encountering problems that it is still here. */
1261#ifdef PCMCIA_DEBUG
1262 if (ei_debug > 4) { /* DMA termination address check... */
1263 int addr, tries = 20;
1264 do {
1265 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
1266 -- it's broken for Rx on some cards! */
1267 int high = inb_p(nic_base + EN0_RSARHI);
1268 int low = inb_p(nic_base + EN0_RSARLO);
1269 addr = (high << 8) + low;
1270 if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff))
1271 break;
1272 } while (--tries > 0);
1273 if (tries <= 0)
1274 printk(KERN_NOTICE "%s: RX transfer address mismatch,"
1275 "%#4.4x (expected) vs. %#4.4x (actual).\n",
1276 dev->name, ring_offset + xfer_count, addr);
1277 }
1278#endif
1279 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1280 ei_status.dmaing &= ~0x01;
1281} /* dma_block_input */
1282
1283/*====================================================================*/
1284
1285static void dma_block_output(struct net_device *dev, int count,
1286 const u_char *buf, const int start_page)
1287{
1288 kio_addr_t nic_base = dev->base_addr;
1289 pcnet_dev_t *info = PRIV(dev);
1290#ifdef PCMCIA_DEBUG
1291 int retries = 0;
1292#endif
1293 u_long dma_start;
1294
1295#ifdef PCMCIA_DEBUG
1296 if (ei_debug > 4)
1297 printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
1298#endif
1299
1300 /* Round the count up for word writes. Do we need to do this?
1301 What effect will an odd byte count have on the 8390?
1302 I should check someday. */
1303 if (count & 0x01)
1304 count++;
1305 if (ei_status.dmaing) {
1306 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output."
1307 "[DMAstat:%1x][irqlock:%1x]\n",
1308 dev->name, ei_status.dmaing, ei_status.irqlock);
1309 return;
1310 }
1311 ei_status.dmaing |= 0x01;
1312 /* We should already be in page 0, but to be safe... */
1313 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD);
1314
1315#ifdef PCMCIA_DEBUG
1316 retry:
1317#endif
1318
1319 outb_p(ENISR_RDC, nic_base + EN0_ISR);
1320
1321 /* Now the normal output. */
1322 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1323 outb_p(count >> 8, nic_base + EN0_RCNTHI);
1324 outb_p(0x00, nic_base + EN0_RSARLO);
1325 outb_p(start_page, nic_base + EN0_RSARHI);
1326
1327 outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD);
1328 outsw(nic_base + PCNET_DATAPORT, buf, count>>1);
1329
1330 dma_start = jiffies;
1331
1332#ifdef PCMCIA_DEBUG
93ad4fb0 1333 /* This was for the ALPHA version only, but enough people have been
1da177e4
LT		 1334 encountering problems that it is still here. */
1335 if (ei_debug > 4) { /* DMA termination address check... */
1336 int addr, tries = 20;
1337 do {
1338 int high = inb_p(nic_base + EN0_RSARHI);
1339 int low = inb_p(nic_base + EN0_RSARLO);
1340 addr = (high << 8) + low;
1341 if ((start_page << 8) + count == addr)
1342 break;
1343 } while (--tries > 0);
1344 if (tries <= 0) {
1345 printk(KERN_NOTICE "%s: Tx packet transfer address mismatch,"
1346 "%#4.4x (expected) vs. %#4.4x (actual).\n",
1347 dev->name, (start_page << 8) + count, addr);
1348 if (retries++ == 0)
1349 goto retry;
1350 }
1351 }
1352#endif
1353
1354 while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
1355 if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
1356 printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n",
1357 dev->name);
1358 pcnet_reset_8390(dev);
1359 NS8390_init(dev, 1);
1360 break;
1361 }
1362
1363 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1364 if (info->flags & DELAY_OUTPUT)
1365 udelay((long)delay_time);
1366 ei_status.dmaing &= ~0x01;
1367}
1368
1369/*====================================================================*/
1370
fba395ee 1371static int setup_dma_config(struct pcmcia_device *link, int start_pg,
1da177e4
LT		 1372 int stop_pg)
1373{
1374 struct net_device *dev = link->priv;
1375
1376 ei_status.tx_start_page = start_pg;
1377 ei_status.rx_start_page = start_pg + TX_PAGES;
1378 ei_status.stop_page = stop_pg;
1379
1380 /* set up block i/o functions */
1381 ei_status.get_8390_hdr = &dma_get_8390_hdr;
1382 ei_status.block_input = &dma_block_input;
1383 ei_status.block_output = &dma_block_output;
1384
1385 return 0;
1386}
1387
1388/*====================================================================*/
1389
1390static void copyin(void *dest, void __iomem *src, int c)
1391{
1392 u_short *d = dest;
1393 u_short __iomem *s = src;
1394 int odd;
1395
1396 if (c <= 0)
1397 return;
1398 odd = (c & 1); c >>= 1;
1399
1400 if (c) {
1401 do { *d++ = __raw_readw(s++); } while (--c);
1402 }
1403 /* get last byte by fetching a word and masking */
1404 if (odd)
1405 *((u_char *)d) = readw(s) & 0xff;
1406}
1407
1408static void copyout(void __iomem *dest, const void *src, int c)
1409{
1410 u_short __iomem *d = dest;
1411 const u_short *s = src;
1412 int odd;
1413
1414 if (c <= 0)
1415 return;
1416 odd = (c & 1); c >>= 1;
1417
1418 if (c) {
1419 do { __raw_writew(*s++, d++); } while (--c);
1420 }
1421 /* copy last byte doing a read-modify-write */
1422 if (odd)
1423 writew((readw(d) & 0xff00) | *(u_char *)s, d);
1424}
1425
1426/*====================================================================*/
1427
1428static void shmem_get_8390_hdr(struct net_device *dev,
1429 struct e8390_pkt_hdr *hdr,
1430 int ring_page)
1431{
1432 void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
1433 + (ring_page << 8)
1434 - (ei_status.rx_start_page << 8);
6ed14254 1435
1da177e4
LT		 1436 copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr));
1437 /* Fix for big endian systems */
1438 hdr->count = le16_to_cpu(hdr->count);
1439}
1440
1441/*====================================================================*/
1442
1443static void shmem_block_input(struct net_device *dev, int count,
1444 struct sk_buff *skb, int ring_offset)
1445{
99417769
AV		 1446 void __iomem *base = ei_status.mem;
1447 unsigned long offset = (TX_PAGES<<8) + ring_offset
1da177e4
LT		 1448 - (ei_status.rx_start_page << 8);
1449 char *buf = skb->data;
6ed14254 1450
99417769 1451 if (offset + count > ei_status.priv) {
1da177e4 1452 /* We must wrap the input move. */
99417769
AV		 1453 int semi_count = ei_status.priv - offset;
1454 copyin(buf, base + offset, semi_count);
1da177e4 1455 buf += semi_count;
99417769 1456 offset = TX_PAGES<<8;
1da177e4
LT		 1457 count -= semi_count;
1458 }
99417769 1459 copyin(buf, base + offset, count);
1da177e4
LT		 1460}
1461
1462/*====================================================================*/
1463
1464static void shmem_block_output(struct net_device *dev, int count,
1465 const u_char *buf, const int start_page)
1466{
1467 void __iomem *shmem = ei_status.mem + (start_page << 8);
1468 shmem -= ei_status.tx_start_page << 8;
1469 copyout(shmem, buf, count);
1470}
1471
1472/*====================================================================*/
1473
fba395ee 1474static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
1da177e4
LT		 1475 int stop_pg, int cm_offset)
1476{
1477 struct net_device *dev = link->priv;
1478 pcnet_dev_t *info = PRIV(dev);
1479 win_req_t req;
1480 memreq_t mem;
1481 int i, window_size, offset, last_ret, last_fn;
1482
1483 window_size = (stop_pg - start_pg) << 8;
1484 if (window_size > 32 * 1024)
1485 window_size = 32 * 1024;
1486
1487 /* Make sure it's a power of two. */
1488 while ((window_size & (window_size - 1)) != 0)
1489 window_size += window_size & ~(window_size - 1);
1490
1491 /* Allocate a memory window */
1492 req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
1493 req.Attributes |= WIN_USE_WAIT;
1494 req.Base = 0; req.Size = window_size;
1495 req.AccessSpeed = mem_speed;
fba395ee 1496 CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
1da177e4
LT		 1497
1498 mem.CardOffset = (start_pg << 8) + cm_offset;
1499 offset = mem.CardOffset % window_size;
1500 mem.CardOffset -= offset;
1501 mem.Page = 0;
1502 CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
1503
1504 /* Try scribbling on the buffer */
1505 info->base = ioremap(req.Base, window_size);
1506 for (i = 0; i < (TX_PAGES<<8); i += 2)
1507 __raw_writew((i>>1), info->base+offset+i);
1508 udelay(100);
1509 for (i = 0; i < (TX_PAGES<<8); i += 2)
1510 if (__raw_readw(info->base+offset+i) != (i>>1)) break;
1511 pcnet_reset_8390(dev);
1512 if (i != (TX_PAGES<<8)) {
1513 iounmap(info->base);
1514 pcmcia_release_window(link->win);
1515 info->base = NULL; link->win = NULL;
1516 goto failed;
1517 }
6ed14254 1518
1da177e4 1519 ei_status.mem = info->base + offset;
99417769 1520 ei_status.priv = req.Size;
1da177e4 1521 dev->mem_start = (u_long)ei_status.mem;
99417769 1522 dev->mem_end = dev->mem_start + req.Size;
1da177e4
LT		 1523
1524 ei_status.tx_start_page = start_pg;
1525 ei_status.rx_start_page = start_pg + TX_PAGES;
1526 ei_status.stop_page = start_pg + ((req.Size - offset) >> 8);
1527
1528 /* set up block i/o functions */
1529 ei_status.get_8390_hdr = &shmem_get_8390_hdr;
1530 ei_status.block_input = &shmem_block_input;
1531 ei_status.block_output = &shmem_block_output;
1532
1533 info->flags |= USE_SHMEM;
1534 return 0;
1535
1536cs_failed:
fba395ee 1537 cs_error(link, last_fn, last_ret);
1da177e4
LT		 1538failed:
1539 return 1;
1540}
1541
1542/*====================================================================*/
1543
ce8a0037
DB		 1544static struct pcmcia_device_id pcnet_ids[] = {
1545 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021),
1546 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a),
1547 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15),
1548 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341),
1549 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
1550 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
1551 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
d277ad0e 1552 PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
ce8a0037
DB		 1553 PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
1554 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
1555 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
1556 PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
40738f3f 1557 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
ce8a0037
DB		 1558 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1559 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
1560 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
1561 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
1562 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
1563 PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
1564 PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
1565 PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004),
1566 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d),
1567 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075),
1568 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
1569 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
1570 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
1571/* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */
1572 PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
1573 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
1574 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
1575 PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
1576/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */
1577 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
1578 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
1579 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
1580 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
1581 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
1582 PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
654e0220 1583 PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
ce8a0037
DB		 1584 PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
1585 PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
1586 PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
1587 PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0),
1588 PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b),
1589 PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b),
1590 PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b),
1591 PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0),
1592 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82),
1593 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8),
1594 PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab),
1595 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
1596 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
1597 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
ce8a0037 1598 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
9c7046cd
JK		 1599 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
1600 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
ce8a0037
DB		 1601 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
1602 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
1603 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb),
1604 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247),
1605 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96),
1606 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1),
1607 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd),
1608 PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190),
1609 PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504),
1610 PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a),
1611 PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79),
1612 PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7),
1613 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a),
1614 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
1615 PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
1616 PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
1617 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
65427298 1618 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
ce8a0037
DB		 1619 PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
1620 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
1621 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
1622 PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
1623 PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
77aab8bf 1624 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88),
ce8a0037
DB		 1625 PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
1626 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
1627 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
1628 PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0),
1629 PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf),
1630 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995),
1631 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233),
1632 PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
1633 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
1634 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
d277ad0e 1635 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
ce8a0037
DB		 1636 PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
1637 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
1638 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
1639 PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1),
1640 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1),
1641 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb),
1642 PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11),
1643 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6),
1644 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c),
1645 PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e),
1646 PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61),
1647 PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517),
1648 PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e),
1649 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb),
1650 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327),
1651 PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
1652 PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
1653 PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
d277ad0e 1654 PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
ce8a0037
DB		 1655 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
1656 PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
1657 PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
1658 PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64),
1659 PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5),
1660 PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3),
1661 PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2),
1662 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c),
1663 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40),
1664 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7),
9c7046cd 1665 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab),
ce8a0037
DB		 1666 PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78),
1667 PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11),
1668 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
1669 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
1670 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
d277ad0e 1671 PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
ce8a0037 1672 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
c96a34ec 1673 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
ce8a0037 1674 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
77aab8bf 1675 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c),
ce8a0037
DB		 1676 PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
1677 PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
1678 PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
1679 PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4),
1680 PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8),
1681 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3),
1682 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c),
1683 PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6),
1684 PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472),
1685 PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7),
1686 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9),
1687 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
1688 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
1689 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
1690 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
1691 PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
9c7046cd 1692 PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
ce8a0037
DB		 1693 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
1694 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941),
1695 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b),
1696 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8),
1697 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0),
1698 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c),
1699 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8),
1700 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb),
1701 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4),
1702 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7),
1703 PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941),
1704 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641),
1705 PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1706 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b),
1707 PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1),
1708 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80),
1709 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
1710 PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
1711 PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
1712 PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
1713 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
1714 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
1715 PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388),
1716 PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c),
1717 PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941),
1718 PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265),
1719 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e),
1720 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8),
1721 PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa),
1722 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f),
9c7046cd 1723 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a),
ce8a0037
DB		 1724 PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e),
1725 PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0),
1726 PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e),
1727 PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89),
1728 PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
1729 PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
1730 PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
1731 PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
1732 PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
1733 PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
1734 /* too generic! */
1735 /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
1736 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
1737 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
1738 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
1739 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
1740 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
1741 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
1742 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
1743 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
1744 PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"),
1745 PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
1746 PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
1747 PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
1748 PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"),
6ed14254 1749 PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
cf393ebe 1750 0xb4be14e3, 0x43ac239b, 0x0877b627),
ce8a0037
DB		 1751 PCMCIA_DEVICE_NULL
1752};
1753MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
1754
1da177e4
LT		 1755static struct pcmcia_driver pcnet_driver = {
1756 .drv = {
1757 .name = "pcnet_cs",
1758 },
f8cfa618 1759 .probe = pcnet_probe,
cc3b4866 1760 .remove = pcnet_detach,
1da177e4 1761 .owner = THIS_MODULE,
ce8a0037 1762 .id_table = pcnet_ids,
98e4c28b
DB		 1763 .suspend = pcnet_suspend,
1764 .resume = pcnet_resume,
1da177e4
LT		 1765};
1766
1767static int __init init_pcnet_cs(void)
1768{
1769 return pcmcia_register_driver(&pcnet_driver);
1770}
1771
1772static void __exit exit_pcnet_cs(void)
1773{
1774 DEBUG(0, "pcnet_cs: unloading\n");
1775 pcmcia_unregister_driver(&pcnet_driver);
1da177e4
LT		 1776}
1777
1778module_init(init_pcnet_cs);
1779module_exit(exit_pcnet_cs);
Clone of davem's net-next-2.6 tree