[net-next-2.6.git] / drivers / net / meth.h


/*
 * snull.h -- definitions for the network module
 *
 * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
 * Copyright (C) 2001 O'Reilly & Associates
 *
 * The source code in this file can be freely used, adapted,
 * and redistributed in source or binary form, so long as an
 * acknowledgment appears in derived source files.  The citation
 * should list that the code comes from the book "Linux Device
 * Drivers" by Alessandro Rubini and Jonathan Corbet, published
 * by O'Reilly & Associates.   No warranty is attached;
 * we cannot take responsibility for errors or fitness for use.
 */

/* version dependencies have been confined to a separate file */

/* Tunable parameters */
#define TX_RING_ENTRIES 64	/* 64-512?*/

#define RX_RING_ENTRIES 16 /* Do not change */
/* Internal constants */
#define TX_RING_BUFFER_SIZE	(TX_RING_ENTRIES*sizeof(tx_packet))
#define RX_BUFFER_SIZE 1546 /* ethenet packet size */
#define METH_RX_BUFF_SIZE 4096
#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */
#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */
#define RX_BUCKET_SIZE 256

/* For more detailed explanations of what each field menas,
   see Nick's great comments to #defines below (or docs, if
   you are lucky enough toget hold of them :)*/

/* tx status vector is written over tx command header upon
   dma completion. */

typedef struct tx_status_vector {
	u64		sent:1; /* always set to 1...*/
	u64		pad0:34;/* always set to 0 */
	u64		flags:9;			/*I'm too lazy to specify each one separately at the moment*/
	u64		col_retry_cnt:4;	/*collision retry count*/
	u64		len:16;				/*Transmit length in bytes*/
} tx_status_vector;

/*
 * Each packet is 128 bytes long.
 * It consists of header, 0-3 concatination
 * buffer pointers and up to 120 data bytes.
 */
typedef struct tx_packet_hdr {
	u64		pad1:36; /*should be filled with 0 */
	u64		cat_ptr3_valid:1,	/*Concatination pointer valid flags*/
			cat_ptr2_valid:1,
			cat_ptr1_valid:1;
	u64		tx_int_flag:1;		/*Generate TX intrrupt when packet has been sent*/
	u64		term_dma_flag:1;	/*Terminate transmit DMA on transmit abort conditions*/
	u64		data_offset:7;		/*Starting byte offset in ring data block*/
	u64		data_len:16;		/*Length of valid data in bytes-1*/
} tx_packet_hdr;
typedef union tx_cat_ptr {
	struct {
		u64		pad2:16; /* should be 0 */
		u64		len:16;				/*length of buffer data - 1*/
		u64		start_addr:29;		/*Physical starting address*/
		u64		pad1:3; /* should be zero */
	} form;
	u64 raw;
} tx_cat_ptr;

typedef struct tx_packet {
	union {
		tx_packet_hdr header;
		tx_status_vector res;
		u64 raw;
	}header;
	union {
		tx_cat_ptr cat_buf[3];
		char dt[120];
	} data;
} tx_packet;

typedef union rx_status_vector {
	volatile struct {
		u64		pad1:1;/*fill it with ones*/
		u64		pad2:15;/*fill with 0*/
		u64		ip_chk_sum:16;
		u64		seq_num:5;
		u64		mac_addr_match:1;
		u64		mcast_addr_match:1;
		u64		carrier_event_seen:1;
		u64		bad_packet:1;
		u64		long_event_seen:1;
		u64		invalid_preamble:1;
		u64		broadcast:1;
		u64		multicast:1;
		u64		crc_error:1;
		u64		huh:1;/*???*/
		u64		rx_code_violation:1;
		u64		rx_len:16;
	} parsed;
	volatile u64 raw;
} rx_status_vector;

typedef struct rx_packet {
	rx_status_vector status;
        u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */
        u16 pad2;
	char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */
} rx_packet;

#define TX_INFO_RPTR    0x00FF0000
#define TX_INFO_WPTR    0x000000FF

	/* Bits in METH_MAC */

#define SGI_MAC_RESET		BIT(0)	/* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */
#define METH_PHY_FDX		BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */
#define METH_PHY_LOOP	BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */
				       /*    selects ignored */
#define METH_100MBIT		BIT(3) /* 0: 10meg mode, 1: 100meg mode */
#define METH_PHY_MII		BIT(4) /* 0: MII selected, 1: SIA selected */
				       /*   Note: when loopback is set this bit becomes collision control.  Setting this bit will */
				       /*         cause a collision to be reported. */

				       /* Bits 5 and 6 are used to determine the Destination address filter mode */
#define METH_ACCEPT_MY 0			/* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20	/* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40	/* 10: Accept physical, broadcast, and all multicast packets */
#define METH_PROMISC 0x60		/* 11: Promiscious mode */

#define METH_PHY_LINK_FAIL	BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */

#define METH_MAC_IPG	0x1ffff00

#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8))
						/* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/
				       /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */
				       /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns  */
				       /* per increment for 10BaseT */

				       /* Bits 15 through 21 are used to determine IPGR1 */

				       /* Bits 22 through 28 are used to determine IPGR2 */

#define METH_REV_SHIFT 29       /* Bits 29 through 31 are used to determine the revision */
				       /* 000: Inital revision */
				       /* 001: First revision, Improved TX concatenation */


/* DMA control bits */
#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */
#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */

#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */
#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */
#define METH_DMA_RX_EN BIT(15) /* Enable RX */
#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */

/* RX FIFO MCL Info bits */
#define METH_RX_FIFO_WPTR(x)   (((x)>>16)&0xf)
#define METH_RX_FIFO_RPTR(x)   (((x)>>8)&0xf)
#define METH_RX_FIFO_DEPTH(x)  ((x)&0x1f)

/* RX status bits */

#define METH_RX_ST_VALID BIT(63)
#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16)
#define METH_RX_ST_DRBL_NBL BIT(17)
#define METH_RX_ST_CRC_ERR BIT(18)
#define METH_RX_ST_MCAST_PKT BIT(19)
#define METH_RX_ST_BCAST_PKT BIT(20)
#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21)
#define METH_RX_ST_LONG_EVT_SEEN BIT(22)
#define METH_RX_ST_BAD_PACKET BIT(23)
#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24)
#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25)
#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26)

#define METH_RX_STATUS_ERRORS \
	( \
	METH_RX_ST_RCV_CODE_VIOLATION| \
	METH_RX_ST_CRC_ERR| \
	METH_RX_ST_INV_PREAMBLE_CTX| \
	METH_RX_ST_LONG_EVT_SEEN| \
	METH_RX_ST_BAD_PACKET| \
	METH_RX_ST_CARRIER_EVT_SEEN \
	)
	/* Bits in METH_INT */
	/* Write _1_ to corresponding bit to clear */
#define METH_INT_TX_EMPTY	BIT(0)	/* 0: No interrupt pending, 1: The TX ring buffer is empty */
#define METH_INT_TX_PKT		BIT(1)	/* 0: No interrupt pending */
					      	/* 1: A TX message had the INT request bit set, the packet has been sent. */
#define METH_INT_TX_LINK_FAIL	BIT(2)	/* 0: No interrupt pending, 1: PHY has reported a link failure */
#define METH_INT_MEM_ERROR	BIT(3)	/* 0: No interrupt pending */
						/* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
#define METH_INT_TX_ABORT		BIT(4)	/* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
#define METH_INT_RX_THRESHOLD	BIT(5)	/* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
#define METH_INT_RX_UNDERFLOW	BIT(6)	/* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
#define METH_INT_RX_OVERFLOW		BIT(7)	/* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */

/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/		/* Bits 8 through 12 alias of RX read-pointer */
#define METH_INT_RX_RPTR_MASK 0x0000F00		/* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/

						/* Bits 13 through 15 are always 0. */

#define METH_INT_TX_RPTR_MASK	0x1FF0000        /* Bits 16 through 24 alias of TX read-pointer */

#define METH_INT_RX_SEQ_MASK	0x2E000000	/* Bits 25 through 29 are the starting seq number for the message at the */

						/* top of the queue */

#define METH_INT_ERROR	(METH_INT_TX_LINK_FAIL| \
			METH_INT_MEM_ERROR| \
			METH_INT_TX_ABORT| \
			METH_INT_RX_OVERFLOW| \
			METH_INT_RX_UNDERFLOW)

#define METH_INT_MCAST_HASH		BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */

/* TX status bits */
#define METH_TX_ST_DONE      BIT(63) /* TX complete */
#define METH_TX_ST_SUCCESS   BIT(23) /* Packet was transmitted successfully */
#define METH_TX_ST_TOOLONG   BIT(24) /* TX abort due to excessive length */
#define METH_TX_ST_UNDERRUN  BIT(25) /* TX abort due to underrun (?) */
#define METH_TX_ST_EXCCOLL   BIT(26) /* TX abort due to excess collisions */
#define METH_TX_ST_DEFER     BIT(27) /* TX abort due to excess deferals */
#define METH_TX_ST_LATECOLL  BIT(28) /* TX abort due to late collision */


/* Tx command header bits */
#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */

/* Phy MDIO interface busy flag */
#define MDIO_BUSY    BIT(16)
#define MDIO_DATA_MASK 0xFFFF
/* PHY defines */
#define PHY_QS6612X    0x0181441    /* Quality TX */
#define PHY_ICS1889    0x0015F41    /* ICS FX */
#define PHY_ICS1890    0x0015F42    /* ICS TX */
#define PHY_DP83840    0x20005C0    /* National TX */

#define ADVANCE_RX_PTR(x)  x=(x+1)&(RX_RING_ENTRIES-1)
Commit	Line	Data
1da177e4 LT	1
	2	/*
	3	* snull.h -- definitions for the network module
	4	*
	5	* Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
	6	* Copyright (C) 2001 O'Reilly & Associates
	7	*
	8	* The source code in this file can be freely used, adapted,
	9	* and redistributed in source or binary form, so long as an
	10	* acknowledgment appears in derived source files. The citation
	11	* should list that the code comes from the book "Linux Device
	12	* Drivers" by Alessandro Rubini and Jonathan Corbet, published
	13	* by O'Reilly & Associates. No warranty is attached;
	14	* we cannot take responsibility for errors or fitness for use.
	15	*/
	16
	17	/* version dependencies have been confined to a separate file */
	18
	19	/* Tunable parameters */
	20	#define TX_RING_ENTRIES 64 /* 64-512?*/
	21
	22	#define RX_RING_ENTRIES 16 /* Do not change */
	23	/* Internal constants */
	24	#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet))
	25	#define RX_BUFFER_SIZE 1546 /* ethenet packet size */
	26	#define METH_RX_BUFF_SIZE 4096
	27	#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */
	28	#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */
	29	#define RX_BUCKET_SIZE 256
	30
1da177e4 LT	31	/* For more detailed explanations of what each field menas,
	32	see Nick's great comments to #defines below (or docs, if
	33	you are lucky enough toget hold of them :)*/
	34
	35	/* tx status vector is written over tx command header upon
	36	dma completion. */
	37
	38	typedef struct tx_status_vector {
	39	u64 sent:1; /* always set to 1...*/
	40	u64 pad0:34;/* always set to 0 */
	41	u64 flags:9; /I'm too lazy to specify each one separately at the moment/
	42	u64 col_retry_cnt:4; /collision retry count/
	43	u64 len:16; /Transmit length in bytes/
	44	} tx_status_vector;
	45
	46	/*
	47	* Each packet is 128 bytes long.
	48	* It consists of header, 0-3 concatination
	49	* buffer pointers and up to 120 data bytes.
	50	*/
	51	typedef struct tx_packet_hdr {
	52	u64 pad1:36; /should be filled with 0 /
	53	u64 cat_ptr3_valid:1, /Concatination pointer valid flags/
	54	cat_ptr2_valid:1,
	55	cat_ptr1_valid:1;
	56	u64 tx_int_flag:1; /Generate TX intrrupt when packet has been sent/
	57	u64 term_dma_flag:1; /Terminate transmit DMA on transmit abort conditions/
	58	u64 data_offset:7; /Starting byte offset in ring data block/
	59	u64 data_len:16; /Length of valid data in bytes-1/
	60	} tx_packet_hdr;
	61	typedef union tx_cat_ptr {
	62	struct {
	63	u64 pad2:16; /* should be 0 */
	64	u64 len:16; /length of buffer data - 1/
	65	u64 start_addr:29; /Physical starting address/
	66	u64 pad1:3; /* should be zero */
	67	} form;
	68	u64 raw;
	69	} tx_cat_ptr;
	70
	71	typedef struct tx_packet {
	72	union {
	73	tx_packet_hdr header;
	74	tx_status_vector res;
	75	u64 raw;
	76	}header;
	77	union {
	78	tx_cat_ptr cat_buf[3];
	79	char dt[120];
	80	} data;
	81	} tx_packet;
	82
	83	typedef union rx_status_vector {
	84	volatile struct {
	85	u64 pad1:1;/fill it with ones/
	86	u64 pad2:15;/fill with 0/
	87	u64 ip_chk_sum:16;
	88	u64 seq_num:5;
	89	u64 mac_addr_match:1;
	90	u64 mcast_addr_match:1;
	91	u64 carrier_event_seen:1;
	92	u64 bad_packet:1;
	93	u64 long_event_seen:1;
	94	u64 invalid_preamble:1;
95	u64 broadcast:1;
96	u64 multicast:1;
97	u64 crc_error:1;
98	u64 huh:1;/???/
99	u64 rx_code_violation:1;
100	u64 rx_len:16;
101	} parsed;
102	volatile u64 raw;
103	} rx_status_vector;
104
105	typedef struct rx_packet {
106	rx_status_vector status;
107	u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */
108	u16 pad2;
109	char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3sizeof(u64)-sizeof(u16)];/ data */
110	} rx_packet;
111
112	#define TX_INFO_RPTR 0x00FF0000
113	#define TX_INFO_WPTR 0x000000FF
114
115	/* Bits in METH_MAC */
116
117	#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */
118	#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */
119	#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */
120	/* selects ignored */
121	#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */
122	#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */
123	/* Note: when loopback is set this bit becomes collision control. Setting this bit will */
124	/* cause a collision to be reported. */
125
59c51591	126	/* Bits 5 and 6 are used to determine the Destination address filter mode */
1da177e4 LT	127	#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
	128	#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
	129	#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
	130	#define METH_PROMISC 0x60 /* 11: Promiscious mode */
	131
	132	#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
	133
	134	#define METH_MAC_IPG 0x1ffff00
	135
	136	#define METH_DEFAULT_IPG ((17<<15) \| (11<<22) \| (21<<8))
	137	/* 0x172e5c00 / / 23, 23, 23 / /0x54A9500 //21,21,21*/
	138	/* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */
	139	/* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */
	140	/* per increment for 10BaseT */
	141
	142	/* Bits 15 through 21 are used to determine IPGR1 */
	143
	144	/* Bits 22 through 28 are used to determine IPGR2 */
	145
	146	#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */
	147	/* 000: Inital revision */
	148	/* 001: First revision, Improved TX concatenation */
	149
	150
	151	/* DMA control bits */
	152	#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */
	153	#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */
	154
	155	#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */
	156	#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */
	157	#define METH_DMA_RX_EN BIT(15) /* Enable RX */
	158	#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */
	159
	160	/* RX FIFO MCL Info bits */
	161	#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf)
	162	#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf)
	163	#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f)
	164
	165	/* RX status bits */
	166
	167	#define METH_RX_ST_VALID BIT(63)
	168	#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16)
	169	#define METH_RX_ST_DRBL_NBL BIT(17)
	170	#define METH_RX_ST_CRC_ERR BIT(18)
	171	#define METH_RX_ST_MCAST_PKT BIT(19)
	172	#define METH_RX_ST_BCAST_PKT BIT(20)
	173	#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21)
	174	#define METH_RX_ST_LONG_EVT_SEEN BIT(22)
	175	#define METH_RX_ST_BAD_PACKET BIT(23)
	176	#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24)
	177	#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25)
	178	#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26)
	179
	180	#define METH_RX_STATUS_ERRORS \
	181	( \
	182	METH_RX_ST_RCV_CODE_VIOLATION\| \
	183	METH_RX_ST_CRC_ERR\| \
	184	METH_RX_ST_INV_PREAMBLE_CTX\| \
	185	METH_RX_ST_LONG_EVT_SEEN\| \
	186	METH_RX_ST_BAD_PACKET\| \
	187	METH_RX_ST_CARRIER_EVT_SEEN \
	188	)
	189	/* Bits in METH_INT */
	190	/* Write _1_ to corresponding bit to clear */
191	#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */
192	#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */
193	/* 1: A TX message had the INT request bit set, the packet has been sent. */
194	#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */
195	#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */
196	/* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
197	#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
198	#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
199	#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
200	#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */
201
202	/#define METH_INT_RX_RPTR_MASK 0x0001F00/ /* Bits 8 through 12 alias of RX read-pointer */
203	#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/
204
205	/* Bits 13 through 15 are always 0. */
206
207	#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */
208
209	#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */
210
211	/* top of the queue */
212
213	#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL\| \
214	METH_INT_MEM_ERROR\| \
215	METH_INT_TX_ABORT\| \
216	METH_INT_RX_OVERFLOW\| \
217	METH_INT_RX_UNDERFLOW)
218
219	#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */
220
221	/* TX status bits */
222	#define METH_TX_ST_DONE BIT(63) /* TX complete */
223	#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */
224	#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */
225	#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */
226	#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */
227	#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */
228	#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */
229
230
231	/* Tx command header bits */
232	#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */
233
234	/* Phy MDIO interface busy flag */
235	#define MDIO_BUSY BIT(16)
236	#define MDIO_DATA_MASK 0xFFFF
237	/* PHY defines */
238	#define PHY_QS6612X 0x0181441 /* Quality TX */
239	#define PHY_ICS1889 0x0015F41 /* ICS FX */
240	#define PHY_ICS1890 0x0015F42 /* ICS TX */
241	#define PHY_DP83840 0x20005C0 /* National TX */
242
243	#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1)