[net-next-2.6.git] / drivers / mfd / Kconfig

#
# Multifunction miscellaneous devices
#

menu "Multifunction device drivers"
	depends on HAS_IOMEM

config MFD_CORE
	tristate
	default n

config MFD_88PM860X
	bool "Support Marvell 88PM8606/88PM8607"
	depends on I2C=y && GENERIC_HARDIRQS
	select MFD_CORE
	help
	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
	  This includes the I2C driver and the core APIs _only_, you have to
	  select individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.

config MFD_SM501
	tristate "Support for Silicon Motion SM501"
	 ---help---
	  This is the core driver for the Silicon Motion SM501 multimedia
	  companion chip. This device is a multifunction device which may
	  provide numerous interfaces including USB host controller, USB gadget,
	  asynchronous serial ports, audio functions, and a dual display video
	  interface. The device may be connected by PCI or local bus with
	  varying functions enabled.

config MFD_SM501_GPIO
	bool "Export GPIO via GPIO layer"
	depends on MFD_SM501 && GPIOLIB
	 ---help---
	 This option uses the gpio library layer to export the 64 GPIO
	 lines on the SM501. The platform data is used to supply the
	 base number for the first GPIO line to register.

config MFD_ASIC3
	bool "Support for Compaq ASIC3"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	select MFD_CORE
	 ---help---
	  This driver supports the ASIC3 multifunction chip found on many
	  PDAs (mainly iPAQ and HTC based ones)

config MFD_SH_MOBILE_SDHI
	bool "Support for SuperH Mobile SDHI"
	depends on SUPERH || ARCH_SHMOBILE
	select MFD_CORE
	select TMIO_MMC_DMA
	 ---help---
	  This driver supports the SDHI hardware block found in many
	  SuperH Mobile SoCs.

config MFD_DAVINCI_VOICECODEC
	tristate
	select MFD_CORE

config MFD_DM355EVM_MSP
	bool "DaVinci DM355 EVM microcontroller"
	depends on I2C && MACH_DAVINCI_DM355_EVM
	help
	  This driver supports the MSP430 microcontroller used on these
	  boards.  MSP430 firmware manages resets and power sequencing,
	  inputs from buttons and the IR remote, LEDs, an RTC, and more.

config HTC_EGPIO
	bool "HTC EGPIO support"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

config HTC_PASIC3
	tristate "HTC PASIC3 LED/DS1WM chip support"
	select MFD_CORE
	help
	  This core driver provides register access for the LED/DS1WM
	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	  HTC Magician devices, respectively. Actual functionality is
	  handled by the leds-pasic3 and ds1wm drivers.

config HTC_I2CPLD
	bool "HTC I2C PLD chip support"
	depends on I2C=y && GPIOLIB
	help
	  If you say yes here you get support for the supposed CPLD
	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
	  This device provides input and output GPIOs through an I2C
	  interface to one or more sub-chips.

config UCB1400_CORE
	tristate "Philips UCB1400 Core driver"
	depends on AC97_BUS
	depends on GPIOLIB
	help
	  This enables support for the Philips UCB1400 core functions.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_core.

config TPS65010
	tristate "TPS6501x Power Management chips"
	depends on I2C && GPIOLIB
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.

config TPS6507X
	tristate "TPS6507x Power Management / Touch Screen chips"
	select MFD_CORE
	depends on I2C
	help
	  If you say yes here you get support for the TPS6507x series of
	  Power Management / Touch Screen chips.  These include voltage
	  regulators, lithium ion/polymer battery charging, touch screen
	  and other features that are often used in portable devices.
	  This driver can also be built as a module.  If so, the module
	  will be called tps6507x.

config MENELAUS
	bool "Texas Instruments TWL92330/Menelaus PM chip"
	depends on I2C=y && ARCH_OMAP2
	help
	  If you say yes here you get support for the Texas Instruments
	  TWL92330/Menelaus Power Management chip. This include voltage
	  regulators, Dual slot memory card transceivers, real-time clock
	  and other features that are often used in portable devices like
	  cell phones and PDAs.

config TWL4030_CORE
	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

	  These multi-function chips are found on many OMAP2 and OMAP3
	  boards, providing power management, RTC, GPIO, keypad, a
	  high speed USB OTG transceiver, an audio codec (on most
	  versions) and many other features.

config TWL4030_POWER
	bool "Support power resources on TWL4030 family chips"
	depends on TWL4030_CORE && ARM
	help
	  Say yes here if you want to use the power resources on the
	  TWL4030 family chips.  Most of these resources are regulators,
	  which have a separate driver; some are control signals, such
	  as clock request handshaking.

	  This driver uses board-specific data to initialize the resources
	  and load scripts controling which resources are switched off/on
	  or reset when a sleep, wakeup or warm reset event occurs.

config TWL4030_CODEC
	bool
	depends on TWL4030_CORE
	select MFD_CORE
	default n

config MFD_TC35892
	bool "Support Toshiba TC35892"
	depends on I2C=y && GENERIC_HARDIRQS
	select MFD_CORE
	help
	  Support for the Toshiba TC35892 I/O Expander.

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config MFD_TMIO
	bool
	default n

config TMIO_MMC_DMA
	bool
	select DMA_ENGINE
	select DMADEVICES

config MFD_T7L66XB
	bool "Support Toshiba T7L66XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller T7L66XB

config MFD_TC6387XB
	bool "Support Toshiba TC6387XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6387XB

config MFD_TC6393XB
	bool "Support Toshiba TC6393XB"
	depends on GPIOLIB && ARM
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6393XB

config PMIC_DA903X
	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	depends on I2C=y
	help
	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	  usually found on PXA processors-based platforms. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, voltage regulators,
	  LEDs and battery-charger under the corresponding menus.

config PMIC_ADP5520
	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	depends on I2C=y
	help
	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
	  Multifunction Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, LEDs, GPIOs and Kepad
	  under the corresponding menus.

config MFD_MAX8925
	bool "Maxim Semiconductor MAX8925 PMIC Support"
	depends on I2C=y && GENERIC_HARDIRQS
	select MFD_CORE
	help
	  Say yes here to support for Maxim Semiconductor MAX8925. This is
	  a Power Management IC. This driver provies common support for
	  accessing the device, additional drivers must be enabled in order
	  to use the functionality of the device.

config MFD_WM8400
	tristate "Support Wolfson Microelectronics WM8400"
	select MFD_CORE
	depends on I2C
	help
	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
	  CODEC.  This driver provides common support for accessing
	  the device, additional drivers must be enabled in order to use
	  the functionality of the device.

config MFD_WM831X
	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
	select MFD_CORE
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config MFD_WM8350
	bool
	depends on GENERIC_HARDIRQS

config MFD_WM8350_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8350_I2C
	bool "Support Wolfson Microelectronics WM8350 with I2C"
	select MFD_WM8350
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  The WM8350 is an integrated audio and power management
	  subsystem with watchdog and RTC functionality for embedded
	  systems.  This option enables core support for the WM8350 with
	  I2C as the control interface.  Additional options must be
	  selected to enable support for the functionality of the chip.

config MFD_WM8994
	bool "Support Wolfson Microelectronics WM8994"
	select MFD_CORE
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  The WM8994 is a highly integrated hi-fi CODEC designed for
	  smartphone applicatiosn.  As well as audio functionality it
	  has on board GPIO and regulator functionality which is
	  supported via the relevant subsystems.  This driver provides
	  core support for the WM8994, in order to use the actual
	  functionaltiy of the device other drivers must be enabled.

config MFD_PCF50633
	tristate "Support for NXP PCF50633"
	depends on I2C
	help
	  Say yes here if you have NXP PCF50633 chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

config MFD_MC13783
	tristate "Support Freescale MC13783"
	depends on SPI_MASTER
	select MFD_CORE
	help
	  Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	  This driver provides common support for accessing  the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config PCF50633_ADC
	tristate "Support for NXP PCF50633 ADC"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support for ADC in the
	 NXP PCF50633 chip.

config PCF50633_GPIO
	tristate "Support for NXP PCF50633 GPIO"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support GPIO for pins on
	 the PCF50633 chip.

config ABX500_CORE
	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
	default y if ARCH_U300
	help
	  Say yes here if you have the ABX500 Mixed Signal IC family
	  chips. This core driver expose register access functions.
	  Functionality specific drivers using these functions can
	  remain unchanged when IC changes. Binding of the functions to
	  actual register access is done by the IC core driver.

config AB3100_CORE
	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	depends on I2C=y && ABX500_CORE
	default y if ARCH_U300
	help
	  Select this to enable the AB3100 Mixed Signal IC core
	  functionality. This connects to a AB3100 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3100 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

config AB3100_OTP
	tristate "ST-Ericsson AB3100 OTP functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	  programmable memory) support. This exposes a sysfs file to read
	  out OTP values.

config EZX_PCAP
	bool "PCAP Support"
	depends on GENERIC_HARDIRQS && SPI_MASTER
	help
	  This enables the PCAP ASIC present on EZX Phones. This is
	  needed for MMC, TouchScreen, Sound, USB, etc..

config AB4500_CORE
	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
	depends on SPI
	help
	  Select this option to enable access to AB4500 power management
	  chip. This connects to U8500 on the SSP/SPI bus and exports
	  read/write functions for the devices to get access to this chip.
	  This chip embeds various other multimedia funtionalities as well.

config AB3550_CORE
        bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
	select MFD_CORE
	depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
	help
	  Select this to enable the AB3550 Mixed Signal IC core
	  functionality. This connects to a AB3550 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3550 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

config MFD_TIMBERDALE
	tristate "Support for the Timberdale FPGA"
	select MFD_CORE
	depends on PCI && GPIOLIB
	---help---
	This is the core driver for the timberdale FPGA. This device is a
	multifunction device which exposes numerous platform devices.

	The timberdale FPGA can be found on the Intel Atom development board
	for in-vehicle infontainment, called Russellville.

config LPC_SCH
	tristate "Intel SCH LPC"
	depends on PCI
	select MFD_CORE
	help
	  LPC bridge function of the Intel SCH provides support for
	  System Management Bus and General Purpose I/O.

config MFD_RDC321X
	tristate "Support for RDC-R321x southbridge"
	select MFD_CORE
	depends on PCI
	help
	  Say yes here if you want to have support for the RDC R-321x SoC
	  southbridge which provides access to GPIOs and Watchdog using the
	  southbridge PCI device configuration space.

config MFD_JANZ_CMODIO
	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
	select MFD_CORE
	depends on PCI
	help
	  This is the core driver for the Janz CMOD-IO PCI MODULbus
	  carrier board. This device is a PCI to MODULbus bridge which may
	  host many different types of MODULbus daughterboards, including
	  CAN and GPIO controllers.

endmenu

menu "Multimedia Capabilities Port drivers"
	depends on ARCH_SA1100

config MCP
	tristate

# Interface drivers
config MCP_SA11X0
	tristate "Support SA11x0 MCP interface"
	depends on ARCH_SA1100
	select MCP

# Chip drivers
config MCP_UCB1200
	tristate "Support for UCB1200 / UCB1300"
	depends on MCP

config MCP_UCB1200_TS
	tristate "Touchscreen interface support"
	depends on MCP_UCB1200 && INPUT

endmenu
Commit	Line	Data
a4e137ab RK	1	#
	2	# Multifunction miscellaneous devices
	3	#
	4
b6d6454f	5	menu "Multifunction device drivers"
e25df120	6	depends on HAS_IOMEM
b6d6454f	7
aa613de6 DES	8	config MFD_CORE
	9	tristate
	10	default n
	11
2cc50bee HZ	12	config MFD_88PM860X
2cc50bee HZ	13	bool "Support Marvell 88PM8606/88PM8607"
8d002bdc	14	depends on I2C=y && GENERIC_HARDIRQS
2cc50bee HZ	15	select MFD_CORE
	16	help
	17	This supports for Marvell 88PM8606/88PM8607 Power Management IC.
	18	This includes the I2C driver and the core APIs _only_, you have to
	19	select individual components like voltage regulators, RTC and
	20	battery-charger under the corresponding menus.
	21
b6d6454f BD	22	config MFD_SM501
	23	tristate "Support for Silicon Motion SM501"
	24	---help---
	25	This is the core driver for the Silicon Motion SM501 multimedia
	26	companion chip. This device is a multifunction device which may
01dd2fbf ML	27	provide numerous interfaces including USB host controller, USB gadget,
01dd2fbf ML	28	asynchronous serial ports, audio functions, and a dual display video
b6d6454f BD	29	interface. The device may be connected by PCI or local bus with
	30	varying functions enabled.
	31
f61be273 BD	32	config MFD_SM501_GPIO
f61be273 BD	33	bool "Export GPIO via GPIO layer"
2eedd604	34	depends on MFD_SM501 && GPIOLIB
f61be273 BD	35	---help---
	36	This option uses the gpio library layer to export the 64 GPIO
	37	lines on the SM501. The platform data is used to supply the
	38	base number for the first GPIO line to register.
	39
fa9ff4b1 SO	40	config MFD_ASIC3
fa9ff4b1 SO	41	bool "Support for Compaq ASIC3"
2eedd604	42	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
9461f65a	43	select MFD_CORE
fa9ff4b1 SO	44	---help---
	45	This driver supports the ASIC3 multifunction chip found on many
	46	PDAs (mainly iPAQ and HTC based ones)
	47
a87d5638 MD	48	config MFD_SH_MOBILE_SDHI
a87d5638 MD	49	bool "Support for SuperH Mobile SDHI"
3d8ca8c0	50	depends on SUPERH \|\| ARCH_SHMOBILE
a87d5638	51	select MFD_CORE
311f3ac7	52	select TMIO_MMC_DMA
a87d5638 MD	53	---help---
	54	This driver supports the SDHI hardware block found in many
	55	SuperH Mobile SoCs.
	56
ca26308c MA	57	config MFD_DAVINCI_VOICECODEC
	58	tristate
	59	select MFD_CORE
	60
0931a4c6 DB	61	config MFD_DM355EVM_MSP
	62	bool "DaVinci DM355 EVM microcontroller"
	63	depends on I2C && MACH_DAVINCI_DM355_EVM
	64	help
	65	This driver supports the MSP430 microcontroller used on these
	66	boards. MSP430 firmware manages resets and power sequencing,
	67	inputs from buttons and the IR remote, LEDs, an RTC, and more.
	68
a1635b8f PZ	69	config HTC_EGPIO
a1635b8f PZ	70	bool "HTC EGPIO support"
7444a72e	71	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
a1635b8f PZ	72	help
	73	This driver supports the CPLD egpio chip present on
	74	several HTC phones. It provides basic support for input
	75	pins, output pins, and irqs.
	76
5dc3339a PZ	77	config HTC_PASIC3
5dc3339a PZ	78	tristate "HTC PASIC3 LED/DS1WM chip support"
0254a8f4	79	select MFD_CORE
5dc3339a PZ	80	help
	81	This core driver provides register access for the LED/DS1WM
	82	chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	83	HTC Magician devices, respectively. Actual functionality is
	84	handled by the leds-pasic3 and ds1wm drivers.
	85
6048a3dd CM	86	config HTC_I2CPLD
6048a3dd CM	87	bool "HTC I2C PLD chip support"
bef3e20c	88	depends on I2C=y && GPIOLIB
6048a3dd CM	89	help
	90	If you say yes here you get support for the supposed CPLD
	91	found on omap850 HTC devices like the HTC Wizard and HTC Herald.
	92	This device provides input and output GPIOs through an I2C
	93	interface to one or more sub-chips.
	94
d9105c2b MV	95	config UCB1400_CORE
d9105c2b MV	96	tristate "Philips UCB1400 Core driver"
e4831802	97	depends on AC97_BUS
5a49a540	98	depends on GPIOLIB
d9105c2b MV	99	help
	100	This enables support for the Philips UCB1400 core functions.
	101	The UCB1400 is an AC97 audio codec.
	102
	103	To compile this driver as a module, choose M here: the
	104	module will be called ucb1400_core.
	105
87c13493 DB	106	config TPS65010
	107	tristate "TPS6501x Power Management chips"
	108	depends on I2C && GPIOLIB
	109	default y if MACH_OMAP_H2 \|\| MACH_OMAP_H3 \|\| MACH_OMAP_OSK
	110	help
	111	If you say yes here you get support for the TPS6501x series of
	112	Power Management chips. These include voltage regulators,
	113	lithium ion/polymer battery charging, and other features that
	114	are often used in portable devices like cell phones and cameras.
	115
	116	This driver can also be built as a module. If so, the module
	117	will be called tps65010.
	118
31dd6a26 TF	119	config TPS6507X
	120	tristate "TPS6507x Power Management / Touch Screen chips"
	121	select MFD_CORE
	122	depends on I2C
	123	help
	124	If you say yes here you get support for the TPS6507x series of
	125	Power Management / Touch Screen chips. These include voltage
	126	regulators, lithium ion/polymer battery charging, touch screen
	127	and other features that are often used in portable devices.
	128	This driver can also be built as a module. If so, the module
	129	will be called tps6507x.
	130
88e75cc3 DB	131	config MENELAUS
88e75cc3 DB	132	bool "Texas Instruments TWL92330/Menelaus PM chip"
088ef950	133	depends on I2C=y && ARCH_OMAP2
88e75cc3 DB	134	help
	135	If you say yes here you get support for the Texas Instruments
	136	TWL92330/Menelaus Power Management chip. This include voltage
692105b8	137	regulators, Dual slot memory card transceivers, real-time clock
88e75cc3 DB	138	and other features that are often used in portable devices like
	139	cell phones and PDAs.
	140
a603a7fa	141	config TWL4030_CORE
e8deb28c	142	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
67460a7c	143	depends on I2C=y && GENERIC_HARDIRQS
a603a7fa	144	help
e8deb28c	145	Say yes here if you have TWL4030 / TWL6030 family chip on your board.
a603a7fa DB	146	This core driver provides register access and IRQ handling
	147	facilities, and registers devices for the various functions
	148	so that function-specific drivers can bind to them.
	149
	150	These multi-function chips are found on many OMAP2 and OMAP3
	151	boards, providing power management, RTC, GPIO, keypad, a
	152	high speed USB OTG transceiver, an audio codec (on most
	153	versions) and many other features.
	154
ebf0bd36 AK	155	config TWL4030_POWER
	156	bool "Support power resources on TWL4030 family chips"
	157	depends on TWL4030_CORE && ARM
	158	help
	159	Say yes here if you want to use the power resources on the
	160	TWL4030 family chips. Most of these resources are regulators,
	161	which have a separate driver; some are control signals, such
	162	as clock request handshaking.
	163
	164	This driver uses board-specific data to initialize the resources
	165	and load scripts controling which resources are switched off/on
	166	or reset when a sleep, wakeup or warm reset event occurs.
	167
0b83ddeb PU	168	config TWL4030_CODEC
	169	bool
	170	depends on TWL4030_CORE
	171	select MFD_CORE
	172	default n
	173
b4ecd326 RV	174	config MFD_TC35892
	175	bool "Support Toshiba TC35892"
	176	depends on I2C=y && GENERIC_HARDIRQS
	177	select MFD_CORE
	178	help
	179	Support for the Toshiba TC35892 I/O Expander.
	180
	181	This driver provides common support for accessing the device,
	182	additional drivers must be enabled in order to use the
	183	functionality of the device.
	184
1c2c30ac SO	185	config MFD_TMIO
	186	bool
	187	default n
	188
311f3ac7 GL	189	config TMIO_MMC_DMA
	190	bool
	191	select DMA_ENGINE
	192	select DMADEVICES
	193
1f192015 IM	194	config MFD_T7L66XB
1f192015 IM	195	bool "Support Toshiba T7L66XB"
9ca68233	196	depends on ARM && HAVE_CLK
1f192015	197	select MFD_CORE
1c2c30ac	198	select MFD_TMIO
1f192015 IM	199	help
	200	Support for Toshiba Mobile IO Controller T7L66XB
	201
cbdfb426 IM	202	config MFD_TC6387XB
cbdfb426 IM	203	bool "Support Toshiba TC6387XB"
9ca68233	204	depends on ARM && HAVE_CLK
cbdfb426	205	select MFD_CORE
1c2c30ac	206	select MFD_TMIO
cbdfb426 IM	207	help
	208	Support for Toshiba Mobile IO Controller TC6387XB
	209
d6315949 DES	210	config MFD_TC6393XB
d6315949 DES	211	bool "Support Toshiba TC6393XB"
8d25b36b	212	depends on GPIOLIB && ARM
f024ff10	213	select MFD_CORE
1c2c30ac	214	select MFD_TMIO
d6315949 DES	215	help
	216	Support for Toshiba Mobile IO Controller TC6393XB
	217
8e2eaabf SO	218	config PMIC_DA903X
	219	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	220	depends on I2C=y
	221	help
	222	Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	223	ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	224	usually found on PXA processors-based platforms. This includes
	225	the I2C driver and the core APIs _only_, you have to select
	226	individual components like LCD backlight, voltage regulators,
	227	LEDs and battery-charger under the corresponding menus.
a5736e0b MH	228
	229	config PMIC_ADP5520
	230	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	231	depends on I2C=y
	232	help
	233	Say yes here to add support for Analog Devices AD5520 and ADP5501,
	234	Multifunction Power Management IC. This includes
	235	the I2C driver and the core APIs _only_, you have to select
	236	individual components like LCD backlight, LEDs, GPIOs and Kepad
	237	under the corresponding menus.
8e2eaabf	238
d50f8f33	239	config MFD_MAX8925
1f1cf8f9	240	bool "Maxim Semiconductor MAX8925 PMIC Support"
8d002bdc	241	depends on I2C=y && GENERIC_HARDIRQS
1ad99893	242	select MFD_CORE
d50f8f33 HZ	243	help
	244	Say yes here to support for Maxim Semiconductor MAX8925. This is
	245	a Power Management IC. This driver provies common support for
	246	accessing the device, additional drivers must be enabled in order
	247	to use the functionality of the device.
	248
1d9f9f04 MB	249	config MFD_WM8400
1d9f9f04 MB	250	tristate "Support Wolfson Microelectronics WM8400"
b8380c1a	251	select MFD_CORE
9c366452	252	depends on I2C
1d9f9f04 MB	253	help
1d9f9f04 MB	254	Support for the Wolfson Microelecronics WM8400 PMIC and audio
9e5aca58	255	CODEC. This driver provides common support for accessing
1d9f9f04 MB	256	the device, additional drivers must be enabled in order to use
	257	the functionality of the device.
	258
b11062b9	259	config MFD_WM831X
6e40173d	260	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
b11062b9	261	select MFD_CORE
8d002bdc	262	depends on I2C=y && GENERIC_HARDIRQS
b11062b9	263	help
d4e0a89e MB	264	Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
d4e0a89e MB	265	This driver provides common support for accessing the device,
b11062b9 MB	266	additional drivers must be enabled in order to use the
	267	functionality of the device.
	268
89b4012b	269	config MFD_WM8350
ecf926bc	270	bool
8d002bdc	271	depends on GENERIC_HARDIRQS
89b4012b MB	272
	273	config MFD_WM8350_CONFIG_MODE_0
	274	bool
	275	depends on MFD_WM8350
	276
	277	config MFD_WM8350_CONFIG_MODE_1
	278	bool
	279	depends on MFD_WM8350
	280
	281	config MFD_WM8350_CONFIG_MODE_2
	282	bool
	283	depends on MFD_WM8350
	284
	285	config MFD_WM8350_CONFIG_MODE_3
	286	bool
	287	depends on MFD_WM8350
	288
ca23f8c1 MB	289	config MFD_WM8351_CONFIG_MODE_0
	290	bool
	291	depends on MFD_WM8350
	292
	293	config MFD_WM8351_CONFIG_MODE_1
	294	bool
	295	depends on MFD_WM8350
	296
	297	config MFD_WM8351_CONFIG_MODE_2
	298	bool
	299	depends on MFD_WM8350
	300
	301	config MFD_WM8351_CONFIG_MODE_3
	302	bool
	303	depends on MFD_WM8350
	304
96920630 MB	305	config MFD_WM8352_CONFIG_MODE_0
	306	bool
	307	depends on MFD_WM8350
	308
	309	config MFD_WM8352_CONFIG_MODE_1
	310	bool
	311	depends on MFD_WM8350
	312
	313	config MFD_WM8352_CONFIG_MODE_2
	314	bool
	315	depends on MFD_WM8350
	316
	317	config MFD_WM8352_CONFIG_MODE_3
	318	bool
	319	depends on MFD_WM8350
	320
c661a0b9	321	config MFD_WM8350_I2C
ecf926bc	322	bool "Support Wolfson Microelectronics WM8350 with I2C"
c661a0b9	323	select MFD_WM8350
8d002bdc	324	depends on I2C=y && GENERIC_HARDIRQS
c661a0b9 MB	325	help
	326	The WM8350 is an integrated audio and power management
	327	subsystem with watchdog and RTC functionality for embedded
	328	systems. This option enables core support for the WM8350 with
	329	I2C as the control interface. Additional options must be
	330	selected to enable support for the functionality of the chip.
	331
9e501086	332	config MFD_WM8994
c9fbf7e0	333	bool "Support Wolfson Microelectronics WM8994"
9e501086	334	select MFD_CORE
c9fbf7e0	335	depends on I2C=y && GENERIC_HARDIRQS
9e501086 MB	336	help
	337	The WM8994 is a highly integrated hi-fi CODEC designed for
	338	smartphone applicatiosn. As well as audio functionality it
	339	has on board GPIO and regulator functionality which is
	340	supported via the relevant subsystems. This driver provides
	341	core support for the WM8994, in order to use the actual
	342	functionaltiy of the device other drivers must be enabled.
	343
f52046b1 BR	344	config MFD_PCF50633
	345	tristate "Support for NXP PCF50633"
	346	depends on I2C
	347	help
	348	Say yes here if you have NXP PCF50633 chip on your board.
	349	This core driver provides register access and IRQ handling
	350	facilities, and registers devices for the various functions
	351	so that function-specific drivers can bind to them.
	352
8238addc SH	353	config MFD_MC13783
	354	tristate "Support Freescale MC13783"
	355	depends on SPI_MASTER
	356	select MFD_CORE
	357	help
	358	Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	359	This driver provides common support for accessing the device,
	360	additional drivers must be enabled in order to use the
	361	functionality of the device.
	362
08c3e06a BR	363	config PCF50633_ADC
	364	tristate "Support for NXP PCF50633 ADC"
	365	depends on MFD_PCF50633
	366	help
	367	Say yes here if you want to include support for ADC in the
	368	NXP PCF50633 chip.
	369
6a3d119b BR	370	config PCF50633_GPIO
	371	tristate "Support for NXP PCF50633 GPIO"
	372	depends on MFD_PCF50633
	373	help
	374	Say yes here if you want to include support GPIO for pins on
	375	the PCF50633 chip.
	376
fa661258 MW	377	config ABX500_CORE
	378	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
	379	default y if ARCH_U300
	380	help
	381	Say yes here if you have the ABX500 Mixed Signal IC family
	382	chips. This core driver expose register access functions.
	383	Functionality specific drivers using these functions can
	384	remain unchanged when IC changes. Binding of the functions to
	385	actual register access is done by the IC core driver.
	386
14fa5691	387	config AB3100_CORE
2071db48	388	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
fa661258	389	depends on I2C=y && ABX500_CORE
14fa5691 LW	390	default y if ARCH_U300
	391	help
	392	Select this to enable the AB3100 Mixed Signal IC core
	393	functionality. This connects to a AB3100 on the I2C bus
	394	and expose a number of symbols needed for dependent devices
	395	to read and write registers and subscribe to events from
	396	this multi-functional IC. This is needed to use other features
	397	of the AB3100 such as battery-backed RTC, charging control,
	398	LEDs, vibrator, system power and temperature, power management
	399	and ALSA sound.
	400
12992dd8 LW	401	config AB3100_OTP
	402	tristate "ST-Ericsson AB3100 OTP functions"
	403	depends on AB3100_CORE
	404	default y if AB3100_CORE
	405	help
	406	Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	407	programmable memory) support. This exposes a sysfs file to read
	408	out OTP values.
	409
13a09f93 DR	410	config EZX_PCAP
	411	bool "PCAP Support"
	412	depends on GENERIC_HARDIRQS && SPI_MASTER
	413	help
	414	This enables the PCAP ASIC present on EZX Phones. This is
	415	needed for MMC, TouchScreen, Sound, USB, etc..
	416
0c41839e SK	417	config AB4500_CORE
	418	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
	419	depends on SPI
0c41839e SK	420	help
	421	Select this option to enable access to AB4500 power management
	422	chip. This connects to U8500 on the SSP/SPI bus and exports
	423	read/write functions for the devices to get access to this chip.
	424	This chip embeds various other multimedia funtionalities as well.
	425
09bcb3f3 MW	426	config AB3550_CORE
	427	bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
	428	select MFD_CORE
	429	depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
	430	help
	431	Select this to enable the AB3550 Mixed Signal IC core
	432	functionality. This connects to a AB3550 on the I2C bus
	433	and expose a number of symbols needed for dependent devices
	434	to read and write registers and subscribe to events from
	435	this multi-functional IC. This is needed to use other features
	436	of the AB3550 such as battery-backed RTC, charging control,
	437	LEDs, vibrator, system power and temperature, power management
	438	and ALSA sound.
	439
8edbede9 RR	440	config MFD_TIMBERDALE
	441	tristate "Support for the Timberdale FPGA"
	442	select MFD_CORE
546e29b6	443	depends on PCI && GPIOLIB
8edbede9 RR	444	---help---
	445	This is the core driver for the timberdale FPGA. This device is a
	446	multifunction device which exposes numerous platform devices.
	447
	448	The timberdale FPGA can be found on the Intel Atom development board
	449	for in-vehicle infontainment, called Russellville.
e82c60ae DT	450
	451	config LPC_SCH
	452	tristate "Intel SCH LPC"
	453	depends on PCI
	454	select MFD_CORE
	455	help
	456	LPC bridge function of the Intel SCH provides support for
	457	System Management Bus and General Purpose I/O.
	458
e090d506 FF	459	config MFD_RDC321X
	460	tristate "Support for RDC-R321x southbridge"
	461	select MFD_CORE
	462	depends on PCI
	463	help
	464	Say yes here if you want to have support for the RDC R-321x SoC
	465	southbridge which provides access to GPIOs and Watchdog using the
	466	southbridge PCI device configuration space.
	467
bd358132 IS	468	config MFD_JANZ_CMODIO
	469	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
	470	select MFD_CORE
	471	depends on PCI
	472	help
	473	This is the core driver for the Janz CMOD-IO PCI MODULbus
	474	carrier board. This device is a PCI to MODULbus bridge which may
	475	host many different types of MODULbus daughterboards, including
	476	CAN and GPIO controllers.
	477
b6d6454f BD	478	endmenu
b6d6454f BD	479
a4e137ab	480	menu "Multimedia Capabilities Port drivers"
f751d50f	481	depends on ARCH_SA1100
a4e137ab RK	482
	483	config MCP
	484	tristate
	485
5e742ad6 RK	486	# Interface drivers
	487	config MCP_SA11X0
	488	tristate "Support SA11x0 MCP interface"
	489	depends on ARCH_SA1100
	490	select MCP
	491
05c45ca9 RK	492	# Chip drivers
	493	config MCP_UCB1200
	494	tristate "Support for UCB1200 / UCB1300"
	495	depends on MCP
	496
acb45439 RK	497	config MCP_UCB1200_TS
	498	tristate "Touchscreen interface support"
	499	depends on MCP_UCB1200 && INPUT
	500
a4e137ab	501	endmenu