git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| fbe60daa MS |
1 | /* |
| 2 | * Video Capture Driver (Video for Linux 1/2) | |
| 3 | * for the Matrox Marvel G200,G400 and Rainbow Runner-G series | |
| 4 | * | |
| 5 | * This module is an interface to the KS0127 video decoder chip. | |
| 6 | * | |
| 7 | * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> | |
| 8 | * | |
| 9 | * This program is free software; you can redistribute it and/or | |
| 10 | * modify it under the terms of the GNU General Public License | |
| 11 | * as published by the Free Software Foundation; either version 2 | |
| 12 | * of the License, or (at your option) any later version. | |
| 13 | * | |
| 14 | * This program is distributed in the hope that it will be useful, | |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 17 | * GNU General Public License for more details. | |
| 18 | * | |
| 19 | * You should have received a copy of the GNU General Public License | |
| 20 | * along with this program; if not, write to the Free Software | |
| 21 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| 22 | * | |
| 23 | ***************************************************************************** | |
| 24 | * | |
| 25 | * Modified and extended by | |
| 26 | * Mike Bernson <mike@mlb.org> | |
| 27 | * Gerard v.d. Horst | |
| 28 | * Leon van Stuivenberg <l.vanstuivenberg@chello.nl> | |
| 29 | * Gernot Ziegler <gz@lysator.liu.se> | |
| 30 | * | |
| 31 | * Version History: | |
| 32 | * V1.0 Ryan Drake Initial version by Ryan Drake | |
| 33 | * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard | |
| 34 | */ | |
| 35 | ||
| 36 | #ifndef __KERNEL__ | |
| 37 | #define __KERNEL__ | |
| 38 | #endif | |
| 39 | ||
| 40 | #include <linux/init.h> | |
| 41 | #include <linux/module.h> | |
| 42 | #include <linux/delay.h> | |
| 43 | #include <linux/errno.h> | |
| 44 | #include <linux/kernel.h> | |
| 45 | #include <linux/slab.h> | |
| 46 | #include <linux/proc_fs.h> | |
| 47 | #include "ks0127.h" | |
| 48 | ||
| 49 | #include <linux/i2c.h> | |
| 50 | #include <linux/video_decoder.h> | |
| 51 | ||
| 52 | #define dprintk if (debug) printk | |
| 53 | ||
| 54 | /* i2c identification */ | |
| 55 | #define I2C_KS0127_ADDON 0xD8 | |
| 56 | #define I2C_KS0127_ONBOARD 0xDA | |
| 57 | ||
| 58 | #define KS_TYPE_UNKNOWN 0 | |
| 59 | #define KS_TYPE_0122S 1 | |
| 60 | #define KS_TYPE_0127 2 | |
| 61 | #define KS_TYPE_0127B 3 | |
| 62 | ||
| 63 | /* ks0127 control registers */ | |
| 64 | #define KS_STAT 0x00 | |
| 65 | #define KS_CMDA 0x01 | |
| 66 | #define KS_CMDB 0x02 | |
| 67 | #define KS_CMDC 0x03 | |
| 68 | #define KS_CMDD 0x04 | |
| 69 | #define KS_HAVB 0x05 | |
| 70 | #define KS_HAVE 0x06 | |
| 71 | #define KS_HS1B 0x07 | |
| 72 | #define KS_HS1E 0x08 | |
| 73 | #define KS_HS2B 0x09 | |
| 74 | #define KS_HS2E 0x0a | |
| 75 | #define KS_AGC 0x0b | |
| 76 | #define KS_HXTRA 0x0c | |
| 77 | #define KS_CDEM 0x0d | |
| 78 | #define KS_PORTAB 0x0e | |
| 79 | #define KS_LUMA 0x0f | |
| 80 | #define KS_CON 0x10 | |
| 81 | #define KS_BRT 0x11 | |
| 82 | #define KS_CHROMA 0x12 | |
| 83 | #define KS_CHROMB 0x13 | |
| 84 | #define KS_DEMOD 0x14 | |
| 85 | #define KS_SAT 0x15 | |
| 86 | #define KS_HUE 0x16 | |
| 87 | #define KS_VERTIA 0x17 | |
| 88 | #define KS_VERTIB 0x18 | |
| 89 | #define KS_VERTIC 0x19 | |
| 90 | #define KS_HSCLL 0x1a | |
| 91 | #define KS_HSCLH 0x1b | |
| 92 | #define KS_VSCLL 0x1c | |
| 93 | #define KS_VSCLH 0x1d | |
| 94 | #define KS_OFMTA 0x1e | |
| 95 | #define KS_OFMTB 0x1f | |
| 96 | #define KS_VBICTL 0x20 | |
| 97 | #define KS_CCDAT2 0x21 | |
| 98 | #define KS_CCDAT1 0x22 | |
| 99 | #define KS_VBIL30 0x23 | |
| 100 | #define KS_VBIL74 0x24 | |
| 101 | #define KS_VBIL118 0x25 | |
| 102 | #define KS_VBIL1512 0x26 | |
| 103 | #define KS_TTFRAM 0x27 | |
| 104 | #define KS_TESTA 0x28 | |
| 105 | #define KS_UVOFFH 0x29 | |
| 106 | #define KS_UVOFFL 0x2a | |
| 107 | #define KS_UGAIN 0x2b | |
| 108 | #define KS_VGAIN 0x2c | |
| 109 | #define KS_VAVB 0x2d | |
| 110 | #define KS_VAVE 0x2e | |
| 111 | #define KS_CTRACK 0x2f | |
| 112 | #define KS_POLCTL 0x30 | |
| 113 | #define KS_REFCOD 0x31 | |
| 114 | #define KS_INVALY 0x32 | |
| 115 | #define KS_INVALU 0x33 | |
| 116 | #define KS_INVALV 0x34 | |
| 117 | #define KS_UNUSEY 0x35 | |
| 118 | #define KS_UNUSEU 0x36 | |
| 119 | #define KS_UNUSEV 0x37 | |
| 120 | #define KS_USRSAV 0x38 | |
| 121 | #define KS_USREAV 0x39 | |
| 122 | #define KS_SHS1A 0x3a | |
| 123 | #define KS_SHS1B 0x3b | |
| 124 | #define KS_SHS1C 0x3c | |
| 125 | #define KS_CMDE 0x3d | |
| 126 | #define KS_VSDEL 0x3e | |
| 127 | #define KS_CMDF 0x3f | |
| 128 | #define KS_GAMMA0 0x40 | |
| 129 | #define KS_GAMMA1 0x41 | |
| 130 | #define KS_GAMMA2 0x42 | |
| 131 | #define KS_GAMMA3 0x43 | |
| 132 | #define KS_GAMMA4 0x44 | |
| 133 | #define KS_GAMMA5 0x45 | |
| 134 | #define KS_GAMMA6 0x46 | |
| 135 | #define KS_GAMMA7 0x47 | |
| 136 | #define KS_GAMMA8 0x48 | |
| 137 | #define KS_GAMMA9 0x49 | |
| 138 | #define KS_GAMMA10 0x4a | |
| 139 | #define KS_GAMMA11 0x4b | |
| 140 | #define KS_GAMMA12 0x4c | |
| 141 | #define KS_GAMMA13 0x4d | |
| 142 | #define KS_GAMMA14 0x4e | |
| 143 | #define KS_GAMMA15 0x4f | |
| 144 | #define KS_GAMMA16 0x50 | |
| 145 | #define KS_GAMMA17 0x51 | |
| 146 | #define KS_GAMMA18 0x52 | |
| 147 | #define KS_GAMMA19 0x53 | |
| 148 | #define KS_GAMMA20 0x54 | |
| 149 | #define KS_GAMMA21 0x55 | |
| 150 | #define KS_GAMMA22 0x56 | |
| 151 | #define KS_GAMMA23 0x57 | |
| 152 | #define KS_GAMMA24 0x58 | |
| 153 | #define KS_GAMMA25 0x59 | |
| 154 | #define KS_GAMMA26 0x5a | |
| 155 | #define KS_GAMMA27 0x5b | |
| 156 | #define KS_GAMMA28 0x5c | |
| 157 | #define KS_GAMMA29 0x5d | |
| 158 | #define KS_GAMMA30 0x5e | |
| 159 | #define KS_GAMMA31 0x5f | |
| 160 | #define KS_GAMMAD0 0x60 | |
| 161 | #define KS_GAMMAD1 0x61 | |
| 162 | #define KS_GAMMAD2 0x62 | |
| 163 | #define KS_GAMMAD3 0x63 | |
| 164 | #define KS_GAMMAD4 0x64 | |
| 165 | #define KS_GAMMAD5 0x65 | |
| 166 | #define KS_GAMMAD6 0x66 | |
| 167 | #define KS_GAMMAD7 0x67 | |
| 168 | #define KS_GAMMAD8 0x68 | |
| 169 | #define KS_GAMMAD9 0x69 | |
| 170 | #define KS_GAMMAD10 0x6a | |
| 171 | #define KS_GAMMAD11 0x6b | |
| 172 | #define KS_GAMMAD12 0x6c | |
| 173 | #define KS_GAMMAD13 0x6d | |
| 174 | #define KS_GAMMAD14 0x6e | |
| 175 | #define KS_GAMMAD15 0x6f | |
| 176 | #define KS_GAMMAD16 0x70 | |
| 177 | #define KS_GAMMAD17 0x71 | |
| 178 | #define KS_GAMMAD18 0x72 | |
| 179 | #define KS_GAMMAD19 0x73 | |
| 180 | #define KS_GAMMAD20 0x74 | |
| 181 | #define KS_GAMMAD21 0x75 | |
| 182 | #define KS_GAMMAD22 0x76 | |
| 183 | #define KS_GAMMAD23 0x77 | |
| 184 | #define KS_GAMMAD24 0x78 | |
| 185 | #define KS_GAMMAD25 0x79 | |
| 186 | #define KS_GAMMAD26 0x7a | |
| 187 | #define KS_GAMMAD27 0x7b | |
| 188 | #define KS_GAMMAD28 0x7c | |
| 189 | #define KS_GAMMAD29 0x7d | |
| 190 | #define KS_GAMMAD30 0x7e | |
| 191 | #define KS_GAMMAD31 0x7f | |
| 192 | ||
| 193 | ||
| 194 | /**************************************************************************** | |
| 195 | * mga_dev : represents one ks0127 chip. | |
| 196 | ****************************************************************************/ | |
| 197 | ||
| 198 | struct adjust { | |
| 199 | int contrast; | |
| 200 | int bright; | |
| 201 | int hue; | |
| 202 | int ugain; | |
| 203 | int vgain; | |
| 204 | }; | |
| 205 | ||
| 206 | struct ks0127 { | |
| 207 | struct i2c_client *client; | |
| 208 | unsigned char addr; | |
| 209 | int format_width; | |
| 210 | int format_height; | |
| 211 | int cap_width; | |
| 212 | int cap_height; | |
| 213 | int norm; | |
| 214 | int ks_type; | |
| 215 | u8 regs[256]; | |
| 216 | }; | |
| 217 | ||
| 218 | ||
| 219 | static int debug; /* insmod parameter */ | |
| 220 | ||
| 221 | module_param(debug, int, 0); | |
| 222 | MODULE_PARM_DESC(debug, "Debug output"); | |
| 223 | MODULE_LICENSE("GPL"); | |
| 224 | ||
| 225 | static u8 reg_defaults[64]; | |
| 226 | ||
| 227 | ||
| 228 | ||
| 229 | static void init_reg_defaults(void) | |
| 230 | { | |
| 231 | u8 *table = reg_defaults; | |
| 232 | ||
| 233 | table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ | |
| 234 | table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ | |
| 235 | table[KS_CMDC] = 0x00; /* Test options */ | |
| 236 | /* clock & input select, write 1 to PORTA */ | |
| 237 | table[KS_CMDD] = 0x01; | |
| 238 | table[KS_HAVB] = 0x00; /* HAV Start Control */ | |
| 239 | table[KS_HAVE] = 0x00; /* HAV End Control */ | |
| 240 | table[KS_HS1B] = 0x10; /* HS1 Start Control */ | |
| 241 | table[KS_HS1E] = 0x00; /* HS1 End Control */ | |
| 242 | table[KS_HS2B] = 0x00; /* HS2 Start Control */ | |
| 243 | table[KS_HS2E] = 0x00; /* HS2 End Control */ | |
| 244 | table[KS_AGC] = 0x53; /* Manual setting for AGC */ | |
| 245 | table[KS_HXTRA] = 0x00; /* Extra Bits for HAV and HS1/2 */ | |
| 246 | table[KS_CDEM] = 0x00; /* Chroma Demodulation Control */ | |
| 247 | table[KS_PORTAB] = 0x0f; /* port B is input, port A output GPPORT */ | |
| 248 | table[KS_LUMA] = 0x01; /* Luma control */ | |
| 249 | table[KS_CON] = 0x00; /* Contrast Control */ | |
| 250 | table[KS_BRT] = 0x00; /* Brightness Control */ | |
| 251 | table[KS_CHROMA] = 0x2a; /* Chroma control A */ | |
| 252 | table[KS_CHROMB] = 0x90; /* Chroma control B */ | |
| 253 | table[KS_DEMOD] = 0x00; /* Chroma Demodulation Control & Status */ | |
| 254 | table[KS_SAT] = 0x00; /* Color Saturation Control*/ | |
| 255 | table[KS_HUE] = 0x00; /* Hue Control */ | |
| 256 | table[KS_VERTIA] = 0x00; /* Vertical Processing Control A */ | |
| 257 | /* Vertical Processing Control B, luma 1 line delayed */ | |
| 258 | table[KS_VERTIB] = 0x12; | |
| 259 | table[KS_VERTIC] = 0x0b; /* Vertical Processing Control C */ | |
| 260 | table[KS_HSCLL] = 0x00; /* Horizontal Scaling Ratio Low */ | |
| 261 | table[KS_HSCLH] = 0x00; /* Horizontal Scaling Ratio High */ | |
| 262 | table[KS_VSCLL] = 0x00; /* Vertical Scaling Ratio Low */ | |
| 263 | table[KS_VSCLH] = 0x00; /* Vertical Scaling Ratio High */ | |
| 264 | /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */ | |
| 265 | table[KS_OFMTA] = 0x30; | |
| 266 | table[KS_OFMTB] = 0x00; /* Output Control B */ | |
| 267 | /* VBI Decoder Control; 4bit fmt: avoid Y overflow */ | |
| 268 | table[KS_VBICTL] = 0x5d; | |
| 269 | table[KS_CCDAT2] = 0x00; /* Read Only register */ | |
| 270 | table[KS_CCDAT1] = 0x00; /* Read Only register */ | |
| 271 | table[KS_VBIL30] = 0xa8; /* VBI data decoding options */ | |
| 272 | table[KS_VBIL74] = 0xaa; /* VBI data decoding options */ | |
| 273 | table[KS_VBIL118] = 0x2a; /* VBI data decoding options */ | |
| 274 | table[KS_VBIL1512] = 0x00; /* VBI data decoding options */ | |
| 275 | table[KS_TTFRAM] = 0x00; /* Teletext frame alignment pattern */ | |
| 276 | table[KS_TESTA] = 0x00; /* test register, shouldn't be written */ | |
| 277 | table[KS_UVOFFH] = 0x00; /* UV Offset Adjustment High */ | |
| 278 | table[KS_UVOFFL] = 0x00; /* UV Offset Adjustment Low */ | |
| 279 | table[KS_UGAIN] = 0x00; /* U Component Gain Adjustment */ | |
| 280 | table[KS_VGAIN] = 0x00; /* V Component Gain Adjustment */ | |
| 281 | table[KS_VAVB] = 0x07; /* VAV Begin */ | |
| 282 | table[KS_VAVE] = 0x00; /* VAV End */ | |
| 283 | table[KS_CTRACK] = 0x00; /* Chroma Tracking Control */ | |
| 284 | table[KS_POLCTL] = 0x41; /* Timing Signal Polarity Control */ | |
| 285 | table[KS_REFCOD] = 0x80; /* Reference Code Insertion Control */ | |
| 286 | table[KS_INVALY] = 0x10; /* Invalid Y Code */ | |
| 287 | table[KS_INVALU] = 0x80; /* Invalid U Code */ | |
| 288 | table[KS_INVALV] = 0x80; /* Invalid V Code */ | |
| 289 | table[KS_UNUSEY] = 0x10; /* Unused Y Code */ | |
| 290 | table[KS_UNUSEU] = 0x80; /* Unused U Code */ | |
| 291 | table[KS_UNUSEV] = 0x80; /* Unused V Code */ | |
| 292 | table[KS_USRSAV] = 0x00; /* reserved */ | |
| 293 | table[KS_USREAV] = 0x00; /* reserved */ | |
| 294 | table[KS_SHS1A] = 0x00; /* User Defined SHS1 A */ | |
| 295 | /* User Defined SHS1 B, ALT656=1 on 0127B */ | |
| 296 | table[KS_SHS1B] = 0x80; | |
| 297 | table[KS_SHS1C] = 0x00; /* User Defined SHS1 C */ | |
| 298 | table[KS_CMDE] = 0x00; /* Command Register E */ | |
| 299 | table[KS_VSDEL] = 0x00; /* VS Delay Control */ | |
| 300 | /* Command Register F, update -immediately- */ | |
| 301 | /* (there might come no vsync)*/ | |
| 302 | table[KS_CMDF] = 0x02; | |
| 303 | } | |
| 304 | ||
| 305 | ||
| 306 | /* We need to manually read because of a bug in the KS0127 chip. | |
| 307 | * | |
| 308 | * An explanation from kayork@mail.utexas.edu: | |
| 309 | * | |
| 310 | * During I2C reads, the KS0127 only samples for a stop condition | |
| 311 | * during the place where the acknoledge bit should be. Any standard | |
| 312 | * I2C implementation (correctly) throws in another clock transition | |
| 313 | * at the 9th bit, and the KS0127 will not recognize the stop condition | |
| 314 | * and will continue to clock out data. | |
| 315 | * | |
| 316 | * So we have to do the read ourself. Big deal. | |
| 317 | workaround in i2c-algo-bit | |
| 318 | */ | |
| 319 | ||
| 320 | ||
| 321 | static u8 ks0127_read(struct ks0127 *ks, u8 reg) | |
| 322 | { | |
| 323 | struct i2c_client *c = ks->client; | |
| 324 | char val = 0; | |
| 325 | struct i2c_msg msgs[] = { | |
| 326 | {c->addr, 0, sizeof(reg), ®}, | |
| 327 | {c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val}}; | |
| 328 | int ret; | |
| 329 | ||
| 330 | ret = i2c_transfer(c->adapter, msgs, ARRAY_SIZE(msgs)); | |
| 331 | if (ret != ARRAY_SIZE(msgs)) | |
| 332 | dprintk("ks0127_write error\n"); | |
| 333 | ||
| 334 | return val; | |
| 335 | } | |
| 336 | ||
| 337 | ||
| 338 | static void ks0127_write(struct ks0127 *ks, u8 reg, u8 val) | |
| 339 | { | |
| 340 | char msg[] = {reg, val}; | |
| 341 | ||
| 342 | if (i2c_master_send(ks->client, msg, sizeof(msg)) != sizeof(msg)) | |
| 343 | dprintk("ks0127_write error\n"); | |
| 344 | ||
| 345 | ks->regs[reg] = val; | |
| 346 | } | |
| 347 | ||
| 348 | ||
| 349 | /* generic bit-twiddling */ | |
| 350 | static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) | |
| 351 | { | |
| 352 | u8 val = ks->regs[reg]; | |
| 353 | val = (val & and_v) | or_v; | |
| 354 | ks0127_write(ks, reg, val); | |
| 355 | } | |
| 356 | ||
| 357 | ||
| 358 | ||
| 359 | /**************************************************************************** | |
| 360 | * ks0127 private api | |
| 361 | ****************************************************************************/ | |
| 362 | static void ks0127_reset(struct ks0127* ks) | |
| 363 | { | |
| 364 | int i; | |
| 365 | u8 *table = reg_defaults; | |
| 366 | ||
| 367 | ks->ks_type = KS_TYPE_UNKNOWN; | |
| 368 | ||
| 369 | dprintk("ks0127: reset\n"); | |
| 370 | msleep(1); | |
| 371 | ||
| 372 | /* initialize all registers to known values */ | |
| 373 | /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ | |
| 374 | ||
| 375 | for(i = 1; i < 33; i++) | |
| 376 | ks0127_write(ks, i, table[i]); | |
| 377 | ||
| 378 | for(i = 35; i < 40; i++) | |
| 379 | ks0127_write(ks, i, table[i]); | |
| 380 | ||
| 381 | for(i = 41; i < 56; i++) | |
| 382 | ks0127_write(ks, i, table[i]); | |
| 383 | ||
| 384 | for(i = 58; i < 64; i++) | |
| 385 | ks0127_write(ks, i, table[i]); | |
| 386 | ||
| 387 | ||
| 388 | if ((ks0127_read(ks, KS_STAT) & 0x80) == 0) { | |
| 389 | ks->ks_type = KS_TYPE_0122S; | |
| 390 | dprintk("ks0127: ks0122s Found\n"); | |
| 391 | return; | |
| 392 | } | |
| 393 | ||
| 394 | switch(ks0127_read(ks, KS_CMDE) & 0x0f) { | |
| 395 | ||
| 396 | case 0: | |
| 397 | ks->ks_type = KS_TYPE_0127; | |
| 398 | dprintk("ks0127: ks0127 found\n"); | |
| 399 | break; | |
| 400 | ||
| 401 | case 9: | |
| 402 | ks->ks_type = KS_TYPE_0127B; | |
| 403 | dprintk("ks0127: ks0127B Revision A found\n"); | |
| 404 | break; | |
| 405 | ||
| 406 | default: | |
| 407 | dprintk("ks0127: unknown revision\n"); | |
| 408 | break; | |
| 409 | } | |
| 410 | } | |
| 411 | ||
| 412 | static int ks0127_command(struct i2c_client *client, | |
| 413 | unsigned int cmd, void *arg) | |
| 414 | { | |
| 415 | struct ks0127 *ks = i2c_get_clientdata(client); | |
| 416 | ||
| 417 | int *iarg = (int*)arg; | |
| 418 | ||
| 419 | int status; | |
| 420 | ||
| 421 | if (!ks) | |
| 422 | return -ENODEV; | |
| 423 | ||
| 424 | switch (cmd) { | |
| 425 | ||
| 426 | case DECODER_INIT: | |
| 427 | dprintk("ks0127: command DECODER_INIT\n"); | |
| 428 | ks0127_reset(ks); | |
| 429 | break; | |
| 430 | ||
| 431 | case DECODER_SET_INPUT: | |
| 432 | switch(*iarg) { | |
| 433 | case KS_INPUT_COMPOSITE_1: | |
| 434 | case KS_INPUT_COMPOSITE_2: | |
| 435 | case KS_INPUT_COMPOSITE_3: | |
| 436 | case KS_INPUT_COMPOSITE_4: | |
| 437 | case KS_INPUT_COMPOSITE_5: | |
| 438 | case KS_INPUT_COMPOSITE_6: | |
| 439 | dprintk("ks0127: command DECODER_SET_INPUT %d: " | |
| 440 | "Composite\n", *iarg); | |
| 441 | /* autodetect 50/60 Hz */ | |
| 442 | ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); | |
| 443 | /* VSE=0 */ | |
| 444 | ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); | |
| 445 | /* set input line */ | |
| 446 | ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); | |
| 447 | /* non-freerunning mode */ | |
| 448 | ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); | |
| 449 | /* analog input */ | |
| 450 | ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); | |
| 451 | /* enable chroma demodulation */ | |
| 452 | ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); | |
| 453 | /* chroma trap, HYBWR=1 */ | |
| 454 | ks0127_and_or(ks, KS_LUMA, 0x00, | |
| 455 | (reg_defaults[KS_LUMA])|0x0c); | |
| 456 | /* scaler fullbw, luma comb off */ | |
| 457 | ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); | |
| 458 | /* manual chroma comb .25 .5 .25 */ | |
| 459 | ks0127_and_or(ks, KS_VERTIC, 0x0f, 0x90); | |
| 460 | ||
| 461 | /* chroma path delay */ | |
| 462 | ks0127_and_or(ks, KS_CHROMB, 0x0f, 0x90); | |
| 463 | ||
| 464 | ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); | |
| 465 | ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); | |
| 466 | ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); | |
| 467 | ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); | |
| 468 | break; | |
| 469 | ||
| 470 | case KS_INPUT_SVIDEO_1: | |
| 471 | case KS_INPUT_SVIDEO_2: | |
| 472 | case KS_INPUT_SVIDEO_3: | |
| 473 | dprintk("ks0127: command DECODER_SET_INPUT %d: " | |
| 474 | "S-Video\n", *iarg); | |
| 475 | /* autodetect 50/60 Hz */ | |
| 476 | ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); | |
| 477 | /* VSE=0 */ | |
| 478 | ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); | |
| 479 | /* set input line */ | |
| 480 | ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); | |
| 481 | /* non-freerunning mode */ | |
| 482 | ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); | |
| 483 | /* analog input */ | |
| 484 | ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); | |
| 485 | /* enable chroma demodulation */ | |
| 486 | ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); | |
| 487 | ks0127_and_or(ks, KS_LUMA, 0x00, | |
| 488 | reg_defaults[KS_LUMA]); | |
| 489 | /* disable luma comb */ | |
| 490 | ks0127_and_or(ks, KS_VERTIA, 0x08, | |
| 491 | (reg_defaults[KS_VERTIA]&0xf0)|0x01); | |
| 492 | ks0127_and_or(ks, KS_VERTIC, 0x0f, | |
| 493 | reg_defaults[KS_VERTIC]&0xf0); | |
| 494 | ||
| 495 | ks0127_and_or(ks, KS_CHROMB, 0x0f, | |
| 496 | reg_defaults[KS_CHROMB]&0xf0); | |
| 497 | ||
| 498 | ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); | |
| 499 | ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); | |
| 500 | ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); | |
| 501 | ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); | |
| 502 | break; | |
| 503 | ||
| 504 | case KS_INPUT_YUV656: | |
| 505 | dprintk("ks0127: command DECODER_SET_INPUT 15: " | |
| 506 | "YUV656\n"); | |
| 507 | if (ks->norm == VIDEO_MODE_NTSC || | |
| 508 | ks->norm == KS_STD_PAL_M) | |
| 509 | /* force 60 Hz */ | |
| 510 | ks0127_and_or(ks, KS_CMDA, 0xfc, 0x03); | |
| 511 | else | |
| 512 | /* force 50 Hz */ | |
| 513 | ks0127_and_or(ks, KS_CMDA, 0xfc, 0x02); | |
| 514 | ||
| 515 | ks0127_and_or(ks, KS_CMDA, 0xff, 0x40); /* VSE=1 */ | |
| 516 | /* set input line and VALIGN */ | |
| 517 | ks0127_and_or(ks, KS_CMDB, 0xb0, (*iarg | 0x40)); | |
| 518 | /* freerunning mode, */ | |
| 519 | /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ | |
| 520 | ks0127_and_or(ks, KS_CMDC, 0x70, 0x87); | |
| 521 | /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ | |
| 522 | ks0127_and_or(ks, KS_CMDD, 0x03, 0x08); | |
| 523 | /* disable chroma demodulation */ | |
| 524 | ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x30); | |
| 525 | /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ | |
| 526 | ks0127_and_or(ks, KS_LUMA, 0x00, 0x71); | |
| 527 | ks0127_and_or(ks, KS_VERTIC, 0x0f, | |
| 528 | reg_defaults[KS_VERTIC]&0xf0); | |
| 529 | ||
| 530 | /* scaler fullbw, luma comb off */ | |
| 531 | ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); | |
| 532 | ||
| 533 | ks0127_and_or(ks, KS_CHROMB, 0x0f, | |
| 534 | reg_defaults[KS_CHROMB]&0xf0); | |
| 535 | ||
| 536 | ks0127_and_or(ks, KS_CON, 0x00, 0x00); | |
| 537 | ks0127_and_or(ks, KS_BRT, 0x00, 32); /* spec: 34 */ | |
| 538 | /* spec: 229 (e5) */ | |
| 539 | ks0127_and_or(ks, KS_SAT, 0x00, 0xe8); | |
| 540 | ks0127_and_or(ks, KS_HUE, 0x00, 0); | |
| 541 | ||
| 542 | ks0127_and_or(ks, KS_UGAIN, 0x00, 238); | |
| 543 | ks0127_and_or(ks, KS_VGAIN, 0x00, 0x00); | |
| 544 | ||
| 545 | /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ | |
| 546 | ks0127_and_or(ks, KS_UVOFFH, 0x00, 0x4f); | |
| 547 | ks0127_and_or(ks, KS_UVOFFL, 0x00, 0x00); | |
| 548 | break; | |
| 549 | ||
| 550 | default: | |
| 551 | dprintk("ks0127: command DECODER_SET_INPUT: " | |
| 552 | "Unknown input %d\n", *iarg); | |
| 553 | break; | |
| 554 | } | |
| 555 | ||
| 556 | /* hack: CDMLPF sometimes spontaneously switches on; */ | |
| 557 | /* force back off */ | |
| 558 | ks0127_write(ks, KS_DEMOD, reg_defaults[KS_DEMOD]); | |
| 559 | break; | |
| 560 | ||
| 561 | case DECODER_SET_OUTPUT: | |
| 562 | switch(*iarg) { | |
| 563 | case KS_OUTPUT_YUV656E: | |
| 564 | dprintk("ks0127: command DECODER_SET_OUTPUT: " | |
| 565 | "OUTPUT_YUV656E (Missing)\n"); | |
| 566 | return -EINVAL; | |
| 567 | break; | |
| 568 | ||
| 569 | case KS_OUTPUT_EXV: | |
| 570 | dprintk("ks0127: command DECODER_SET_OUTPUT: " | |
| 571 | "OUTPUT_EXV\n"); | |
| 572 | ks0127_and_or(ks, KS_OFMTA, 0xf0, 0x09); | |
| 573 | break; | |
| 574 | } | |
| 575 | break; | |
| 576 | ||
| 577 | case DECODER_SET_NORM: //sam This block mixes old and new norm names... | |
| 578 | /* Set to automatic SECAM/Fsc mode */ | |
| 579 | ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); | |
| 580 | ||
| 581 | ks->norm = *iarg; | |
| 582 | switch(*iarg) | |
| 583 | { | |
| 584 | /* this is untested !! */ | |
| 585 | /* It just detects PAL_N/NTSC_M (no special frequencies) */ | |
| 586 | /* And you have to set the standard a second time afterwards */ | |
| 587 | case VIDEO_MODE_AUTO: | |
| 588 | dprintk("ks0127: command DECODER_SET_NORM: AUTO\n"); | |
| 589 | ||
| 590 | /* The chip determines the format */ | |
| 591 | /* based on the current field rate */ | |
| 592 | ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); | |
| 593 | ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); | |
| 594 | /* This is wrong for PAL ! As I said, */ | |
| 595 | /* you need to set the standard once again !! */ | |
| 596 | ks->format_height = 240; | |
| 597 | ks->format_width = 704; | |
| 598 | break; | |
| 599 | ||
| 600 | case VIDEO_MODE_NTSC: | |
| 601 | dprintk("ks0127: command DECODER_SET_NORM: NTSC_M\n"); | |
| 602 | ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); | |
| 603 | ks->format_height = 240; | |
| 604 | ks->format_width = 704; | |
| 605 | break; | |
| 606 | ||
| 607 | case KS_STD_NTSC_N: | |
| 608 | dprintk("ks0127: command KS0127_SET_STANDARD: " | |
| 609 | "NTSC_N (fixme)\n"); | |
| 610 | ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); | |
| 611 | ks->format_height = 240; | |
| 612 | ks->format_width = 704; | |
| 613 | break; | |
| 614 | ||
| 615 | case VIDEO_MODE_PAL: | |
| 616 | dprintk("ks0127: command DECODER_SET_NORM: PAL_N\n"); | |
| 617 | ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); | |
| 618 | ks->format_height = 290; | |
| 619 | ks->format_width = 704; | |
| 620 | break; | |
| 621 | ||
| 622 | case KS_STD_PAL_M: | |
| 623 | dprintk("ks0127: command KS0127_SET_STANDARD: " | |
| 624 | "PAL_M (fixme)\n"); | |
| 625 | ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); | |
| 626 | ks->format_height = 290; | |
| 627 | ks->format_width = 704; | |
| 628 | break; | |
| 629 | ||
| 630 | case VIDEO_MODE_SECAM: | |
| 631 | dprintk("ks0127: command KS0127_SET_STANDARD: " | |
| 632 | "SECAM\n"); | |
| 633 | ks->format_height = 290; | |
| 634 | ks->format_width = 704; | |
| 635 | ||
| 636 | /* set to secam autodetection */ | |
| 637 | ks0127_and_or(ks, KS_CHROMA, 0xdf, 0x20); | |
| 638 | ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); | |
| 639 | schedule_timeout_interruptible(HZ/10+1); | |
| 640 | ||
| 641 | /* did it autodetect? */ | |
| 642 | if (ks0127_read(ks, KS_DEMOD) & 0x40) | |
| 643 | break; | |
| 644 | ||
| 645 | /* force to secam mode */ | |
| 646 | ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x0f); | |
| 647 | break; | |
| 648 | ||
| 649 | default: | |
| 650 | dprintk("ks0127: command DECODER_SET_NORM: " | |
| 651 | "Unknown norm %d\n", *iarg); | |
| 652 | break; | |
| 653 | } | |
| 654 | break; | |
| 655 | ||
| 656 | case DECODER_SET_PICTURE: | |
| 657 | dprintk("ks0127: command DECODER_SET_PICTURE " | |
| 658 | "not yet supported (fixme)\n"); | |
| 659 | return -EINVAL; | |
| 660 | ||
| 661 | //sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE | |
| 662 | //sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE | |
| 663 | //sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? | |
| 664 | //sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE | |
| 665 | //sam todo: KS0127_SET_AGC_MODE: | |
| 666 | //sam todo: KS0127_SET_AGC: | |
| 667 | //sam todo: KS0127_SET_CHROMA_MODE: | |
| 668 | //sam todo: KS0127_SET_PIXCLK_MODE: | |
| 669 | //sam todo: KS0127_SET_GAMMA_MODE: | |
| 670 | //sam todo: KS0127_SET_UGAIN: | |
| 671 | //sam todo: KS0127_SET_VGAIN: | |
| 672 | //sam todo: KS0127_SET_INVALY: | |
| 673 | //sam todo: KS0127_SET_INVALU: | |
| 674 | //sam todo: KS0127_SET_INVALV: | |
| 675 | //sam todo: KS0127_SET_UNUSEY: | |
| 676 | //sam todo: KS0127_SET_UNUSEU: | |
| 677 | //sam todo: KS0127_SET_UNUSEV: | |
| 678 | //sam todo: KS0127_SET_VSALIGN_MODE: | |
| 679 | ||
| 680 | case DECODER_ENABLE_OUTPUT: | |
| 681 | { | |
| c6eb8eaf | 682 | int enable; |
| fbe60daa | 683 | |
| c6eb8eaf HV |
684 | iarg = arg; |
| 685 | enable = (*iarg != 0); | |
| 686 | if (enable) { | |
| 687 | dprintk("ks0127: command " | |
| fbe60daa MS |
688 | "DECODER_ENABLE_OUTPUT on " |
| 689 | "(%d)\n", enable); | |
| c6eb8eaf HV |
690 | /* All output pins on */ |
| 691 | ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); | |
| 692 | /* Obey the OEN pin */ | |
| 693 | ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); | |
| 694 | } else { | |
| 695 | dprintk("ks0127: command " | |
| fbe60daa MS |
696 | "DECODER_ENABLE_OUTPUT off " |
| 697 | "(%d)\n", enable); | |
| c6eb8eaf HV |
698 | /* Video output pins off */ |
| 699 | ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); | |
| 700 | /* Ignore the OEN pin */ | |
| 701 | ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); | |
| 702 | } | |
| fbe60daa MS |
703 | } |
| 704 | break; | |
| 705 | ||
| 706 | //sam todo: KS0127_SET_OUTPUT_MODE: | |
| 707 | //sam todo: KS0127_SET_WIDTH: | |
| 708 | //sam todo: KS0127_SET_HEIGHT: | |
| 709 | //sam todo: KS0127_SET_HSCALE: | |
| 710 | ||
| 711 | case DECODER_GET_STATUS: | |
| 712 | dprintk("ks0127: command DECODER_GET_STATUS\n"); | |
| 713 | *iarg = 0; | |
| 714 | status = ks0127_read(ks, KS_STAT); | |
| 715 | if (!(status & 0x20)) /* NOVID not set */ | |
| 55d5440d | 716 | *iarg = (*iarg | DECODER_STATUS_GOOD); |
| fbe60daa | 717 | if ((status & 0x01)) /* CLOCK set */ |
| 55d5440d | 718 | *iarg = (*iarg | DECODER_STATUS_COLOR); |
| fbe60daa | 719 | if ((status & 0x08)) /* PALDET set */ |
| 55d5440d | 720 | *iarg = (*iarg | DECODER_STATUS_PAL); |
| fbe60daa | 721 | else |
| 55d5440d | 722 | *iarg = (*iarg | DECODER_STATUS_NTSC); |
| fbe60daa MS |
723 | break; |
| 724 | ||
| 725 | //Catch any unknown command | |
| 726 | default: | |
| 727 | dprintk("ks0127: command unknown: %04X\n", cmd); | |
| 728 | return -EINVAL; | |
| 729 | } | |
| 730 | return 0; | |
| 731 | } | |
| 732 | ||
| 733 | ||
| 734 | ||
| 735 | ||
| 736 | static int ks0127_probe(struct i2c_adapter *adapter); | |
| 737 | static int ks0127_detach(struct i2c_client *client); | |
| 738 | static int ks0127_command(struct i2c_client *client, | |
| 739 | unsigned int cmd, void *arg); | |
| 740 | ||
| 741 | ||
| 742 | ||
| 743 | /* Addresses to scan */ | |
| 744 | static unsigned short normal_i2c[] = {I2C_KS0127_ADDON>>1, | |
| 745 | I2C_KS0127_ONBOARD>>1, I2C_CLIENT_END}; | |
| 746 | static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; | |
| 747 | static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; | |
| 748 | static struct i2c_client_address_data addr_data = { | |
| 749 | normal_i2c, | |
| 750 | probe, | |
| 751 | ignore, | |
| 752 | }; | |
| 753 | ||
| 754 | static struct i2c_driver i2c_driver_ks0127 = { | |
| 755 | .driver.name = "ks0127", | |
| 756 | .id = I2C_DRIVERID_KS0127, | |
| 757 | .attach_adapter = ks0127_probe, | |
| 758 | .detach_client = ks0127_detach, | |
| 759 | .command = ks0127_command | |
| 760 | }; | |
| 761 | ||
| 762 | static struct i2c_client ks0127_client_tmpl = | |
| 763 | { | |
| 764 | .name = "(ks0127 unset)", | |
| 765 | .addr = 0, | |
| 766 | .adapter = NULL, | |
| 767 | .driver = &i2c_driver_ks0127, | |
| fbe60daa MS |
768 | }; |
| 769 | ||
| 770 | static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind) | |
| 771 | { | |
| 772 | struct ks0127 *ks; | |
| 773 | struct i2c_client *client; | |
| 774 | ||
| 775 | client = kzalloc(sizeof(*client), GFP_KERNEL); | |
| 776 | if (client == NULL) | |
| 777 | return -ENOMEM; | |
| 778 | memcpy(client, &ks0127_client_tmpl, sizeof(*client)); | |
| 779 | ||
| 780 | ks = kzalloc(sizeof(*ks), GFP_KERNEL); | |
| 781 | if (ks == NULL) { | |
| 782 | kfree(client); | |
| 783 | return -ENOMEM; | |
| 784 | } | |
| 785 | ||
| 786 | i2c_set_clientdata(client, ks); | |
| 787 | client->adapter = adapter; | |
| 788 | client->addr = addr; | |
| 789 | sprintf(client->name, "ks0127-%02x", adapter->id); | |
| 790 | ||
| 791 | ks->client = client; | |
| 792 | ks->addr = addr; | |
| 793 | ks->ks_type = KS_TYPE_UNKNOWN; | |
| 794 | ||
| 795 | /* power up */ | |
| 796 | ks0127_write(ks, KS_CMDA, 0x2c); | |
| 797 | mdelay(10); | |
| 798 | ||
| 799 | /* reset the device */ | |
| 800 | ks0127_reset(ks); | |
| 801 | printk(KERN_INFO "ks0127: attach: %s video decoder\n", | |
| 802 | ks->addr==(I2C_KS0127_ADDON>>1) ? "addon" : "on-board"); | |
| 803 | ||
| 804 | i2c_attach_client(client); | |
| 805 | return 0; | |
| 806 | } | |
| 807 | ||
| 808 | ||
| 809 | static int ks0127_probe(struct i2c_adapter *adapter) | |
| 810 | { | |
| 811 | if (adapter->id == I2C_HW_B_ZR36067) | |
| 812 | return i2c_probe(adapter, &addr_data, ks0127_found_proc); | |
| 813 | return 0; | |
| 814 | } | |
| 815 | ||
| 816 | static int ks0127_detach(struct i2c_client *client) | |
| 817 | { | |
| 818 | struct ks0127 *ks = i2c_get_clientdata(client); | |
| 819 | ||
| 820 | ks0127_write(ks, KS_OFMTA, 0x20); /*tristate*/ | |
| 821 | ks0127_write(ks, KS_CMDA, 0x2c | 0x80); /* power down */ | |
| 822 | ||
| 823 | i2c_detach_client(client); | |
| 824 | kfree(ks); | |
| 825 | kfree(client); | |
| 826 | ||
| 827 | dprintk("ks0127: detach\n"); | |
| 828 | return 0; | |
| 829 | } | |
| 830 | ||
| 831 | ||
| 832 | static int __devinit ks0127_init_module(void) | |
| 833 | { | |
| 834 | init_reg_defaults(); | |
| f70a7a91 | 835 | return i2c_add_driver(&i2c_driver_ks0127); |
| fbe60daa MS |
836 | } |
| 837 | ||
| 838 | static void __devexit ks0127_cleanup_module(void) | |
| 839 | { | |
| 840 | i2c_del_driver(&i2c_driver_ks0127); | |
| 841 | } | |
| 842 | ||
| 843 | ||
| 844 | module_init(ks0127_init_module); | |
| 845 | module_exit(ks0127_cleanup_module); |