[net-next-2.6.git] / drivers / input / touchscreen / mainstone-wm97xx.c

/*
 * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
 *                         Wolfson WM97xx AC97 Codecs.
 *
 * Copyright 2004, 2007 Wolfson Microelectronics PLC.
 * Author: Liam Girdwood <lrg@slimlogic.co.uk>
 * Parts Copyright : Ian Molton <spyro@f2s.com>
 *                   Andrew Zabolotny <zap@homelink.ru>
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 * Notes:
 *     This is a wm97xx extended touch driver to capture touch
 *     data in a continuous manner on the Intel XScale archictecture
 *
 *  Features:
 *       - codecs supported:- WM9705, WM9712, WM9713
 *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
 *
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/wm97xx.h>
#include <linux/io.h>
#include <asm/arch/pxa-regs.h>

#define VERSION		"0.13"

struct continuous {
	u16 id;    /* codec id */
	u8 code;   /* continuous code */
	u8 reads;  /* number of coord reads per read cycle */
	u32 speed; /* number of coords per second */
};

#define WM_READS(sp) ((sp / HZ) + 1)

static const struct continuous cinfo[] = {
	{WM9705_ID2, 0, WM_READS(94), 94},
	{WM9705_ID2, 1, WM_READS(188), 188},
	{WM9705_ID2, 2, WM_READS(375), 375},
	{WM9705_ID2, 3, WM_READS(750), 750},
	{WM9712_ID2, 0, WM_READS(94), 94},
	{WM9712_ID2, 1, WM_READS(188), 188},
	{WM9712_ID2, 2, WM_READS(375), 375},
	{WM9712_ID2, 3, WM_READS(750), 750},
	{WM9713_ID2, 0, WM_READS(94), 94},
	{WM9713_ID2, 1, WM_READS(120), 120},
	{WM9713_ID2, 2, WM_READS(154), 154},
	{WM9713_ID2, 3, WM_READS(188), 188},
};

/* continuous speed index */
static int sp_idx;
static u16 last, tries;

/*
 * Pen sampling frequency (Hz) in continuous mode.
 */
static int cont_rate = 200;
module_param(cont_rate, int, 0);
MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");

/*
 * Pen down detection.
 *
 * This driver can either poll or use an interrupt to indicate a pen down
 * event. If the irq request fails then it will fall back to polling mode.
 */
static int pen_int;
module_param(pen_int, int, 0);
MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");

/*
 * Pressure readback.
 *
 * Set to 1 to read back pen down pressure
 */
static int pressure;
module_param(pressure, int, 0);
MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");

/*
 * AC97 touch data slot.
 *
 * Touch screen readback data ac97 slot
 */
static int ac97_touch_slot = 5;
module_param(ac97_touch_slot, int, 0);
MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");


/* flush AC97 slot 5 FIFO on pxa machines */
#ifdef CONFIG_PXA27x
static void wm97xx_acc_pen_up(struct wm97xx *wm)
{
	schedule_timeout_uninterruptible(1);

	while (MISR & (1 << 2))
		MODR;
}
#else
static void wm97xx_acc_pen_up(struct wm97xx *wm)
{
	int count = 16;
	schedule_timeout_uninterruptible(1);

	while (count < 16) {
		MODR;
		count--;
	}
}
#endif

static int wm97xx_acc_pen_down(struct wm97xx *wm)
{
	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
	int reads = 0;

	/* When the AC97 queue has been drained we need to allow time
	 * to buffer up samples otherwise we end up spinning polling
	 * for samples.  The controller can't have a suitably low
	 * threashold set to use the notifications it gives.
	 */
	schedule_timeout_uninterruptible(1);

	if (tries > 5) {
		tries = 0;
		return RC_PENUP;
	}

	x = MODR;
	if (x == last) {
		tries++;
		return RC_AGAIN;
	}
	last = x;
	do {
		if (reads)
			x = MODR;
		y = MODR;
		if (pressure)
			p = MODR;

		/* are samples valid */
		if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
		    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
		    (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
			goto up;

		/* coordinate is good */
		tries = 0;
		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
		input_sync(wm->input_dev);
		reads++;
	} while (reads < cinfo[sp_idx].reads);
up:
	return RC_PENDOWN | RC_AGAIN;
}

static int wm97xx_acc_startup(struct wm97xx *wm)
{
	int idx = 0;

	/* check we have a codec */
	if (wm->ac97 == NULL)
		return -ENODEV;

	/* Go you big red fire engine */
	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
		if (wm->id != cinfo[idx].id)
			continue;
		sp_idx = idx;
		if (cont_rate <= cinfo[idx].speed)
			break;
	}
	wm->acc_rate = cinfo[sp_idx].code;
	wm->acc_slot = ac97_touch_slot;
	dev_info(wm->dev,
		 "mainstone accelerated touchscreen driver, %d samples/sec\n",
		 cinfo[sp_idx].speed);

	/* codec specific irq config */
	if (pen_int) {
		switch (wm->id) {
		case WM9705_ID2:
			wm->pen_irq = IRQ_GPIO(4);
			set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH);
			break;
		case WM9712_ID2:
		case WM9713_ID2:
			/* enable pen down interrupt */
			/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
			wm->pen_irq = MAINSTONE_AC97_IRQ;
			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
					   WM97XX_GPIO_POL_HIGH,
					   WM97XX_GPIO_STICKY,
					   WM97XX_GPIO_WAKE);
			wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
					   WM97XX_GPIO_POL_HIGH,
					   WM97XX_GPIO_NOTSTICKY,
					   WM97XX_GPIO_NOWAKE);
			break;
		default:
			dev_err(wm->dev,
				"pen down irq not supported on this device\n");
			pen_int = 0;
			break;
		}
	}

	return 0;
}

static void wm97xx_acc_shutdown(struct wm97xx *wm)
{
	/* codec specific deconfig */
	if (pen_int) {
		switch (wm->id & 0xffff) {
		case WM9705_ID2:
			wm->pen_irq = 0;
			break;
		case WM9712_ID2:
		case WM9713_ID2:
			/* disable interrupt */
			wm->pen_irq = 0;
			break;
		}
	}
}

static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
{
	if (enable)
		enable_irq(wm->pen_irq);
	else
		disable_irq(wm->pen_irq);
}

static struct wm97xx_mach_ops mainstone_mach_ops = {
	.acc_enabled = 1,
	.acc_pen_up = wm97xx_acc_pen_up,
	.acc_pen_down = wm97xx_acc_pen_down,
	.acc_startup = wm97xx_acc_startup,
	.acc_shutdown = wm97xx_acc_shutdown,
	.irq_enable = wm97xx_irq_enable,
	.irq_gpio = WM97XX_GPIO_2,
};

static int mainstone_wm97xx_probe(struct platform_device *pdev)
{
	struct wm97xx *wm = platform_get_drvdata(pdev);

	return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
}

static int mainstone_wm97xx_remove(struct platform_device *pdev)
{
	struct wm97xx *wm = platform_get_drvdata(pdev);

	wm97xx_unregister_mach_ops(wm);
	return 0;
}

static struct platform_driver mainstone_wm97xx_driver = {
	.probe = mainstone_wm97xx_probe,
	.remove = mainstone_wm97xx_remove,
	.driver = {
		.name = "wm97xx-touch",
	},
};

static int __init mainstone_wm97xx_init(void)
{
	return platform_driver_register(&mainstone_wm97xx_driver);
}

static void __exit mainstone_wm97xx_exit(void)
{
	platform_driver_unregister(&mainstone_wm97xx_driver);
}

module_init(mainstone_wm97xx_init);
module_exit(mainstone_wm97xx_exit);

/* Module information */
MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
MODULE_LICENSE("GPL");
Commit	Line	Data
4db8a5f2 MB	1	/*
	2	* mainstone-wm97xx.c -- Mainstone Continuous Touch screen driver for
	3	* Wolfson WM97xx AC97 Codecs.
	4	*
	5	* Copyright 2004, 2007 Wolfson Microelectronics PLC.
b8d055a8	6	* Author: Liam Girdwood <lrg@slimlogic.co.uk>
4db8a5f2 MB	7	* Parts Copyright : Ian Molton <spyro@f2s.com>
	8	* Andrew Zabolotny <zap@homelink.ru>
	9	*
	10	* This program is free software; you can redistribute it and/or modify it
	11	* under the terms of the GNU General Public License as published by the
	12	* Free Software Foundation; either version 2 of the License, or (at your
	13	* option) any later version.
	14	*
	15	* Notes:
	16	* This is a wm97xx extended touch driver to capture touch
	17	* data in a continuous manner on the Intel XScale archictecture
	18	*
	19	* Features:
	20	* - codecs supported:- WM9705, WM9712, WM9713
	21	* - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
	22	*
	23	*/
	24
	25	#include <linux/module.h>
	26	#include <linux/moduleparam.h>
	27	#include <linux/version.h>
	28	#include <linux/kernel.h>
	29	#include <linux/init.h>
	30	#include <linux/delay.h>
	31	#include <linux/irq.h>
	32	#include <linux/interrupt.h>
	33	#include <linux/wm97xx.h>
	34	#include <linux/io.h>
	35	#include <asm/arch/pxa-regs.h>
	36
	37	#define VERSION "0.13"
	38
	39	struct continuous {
	40	u16 id; /* codec id */
	41	u8 code; /* continuous code */
	42	u8 reads; /* number of coord reads per read cycle */
	43	u32 speed; /* number of coords per second */
	44	};
	45
	46	#define WM_READS(sp) ((sp / HZ) + 1)
	47
	48	static const struct continuous cinfo[] = {
	49	{WM9705_ID2, 0, WM_READS(94), 94},
	50	{WM9705_ID2, 1, WM_READS(188), 188},
	51	{WM9705_ID2, 2, WM_READS(375), 375},
	52	{WM9705_ID2, 3, WM_READS(750), 750},
	53	{WM9712_ID2, 0, WM_READS(94), 94},
	54	{WM9712_ID2, 1, WM_READS(188), 188},
	55	{WM9712_ID2, 2, WM_READS(375), 375},
	56	{WM9712_ID2, 3, WM_READS(750), 750},
	57	{WM9713_ID2, 0, WM_READS(94), 94},
	58	{WM9713_ID2, 1, WM_READS(120), 120},
	59	{WM9713_ID2, 2, WM_READS(154), 154},
	60	{WM9713_ID2, 3, WM_READS(188), 188},
	61	};
	62
	63	/* continuous speed index */
	64	static int sp_idx;
	65	static u16 last, tries;
	66
	67	/*
	68	* Pen sampling frequency (Hz) in continuous mode.
	69	*/
	70	static int cont_rate = 200;
71	module_param(cont_rate, int, 0);
72	MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
73
74	/*
75	* Pen down detection.
76	*
77	* This driver can either poll or use an interrupt to indicate a pen down
78	* event. If the irq request fails then it will fall back to polling mode.
79	*/
80	static int pen_int;
81	module_param(pen_int, int, 0);
82	MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
83
84	/*
85	* Pressure readback.
86	*
87	* Set to 1 to read back pen down pressure
88	*/
89	static int pressure;
90	module_param(pressure, int, 0);
91	MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
92
93	/*
94	* AC97 touch data slot.
95	*
96	* Touch screen readback data ac97 slot
97	*/
98	static int ac97_touch_slot = 5;
99	module_param(ac97_touch_slot, int, 0);
100	MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
101
102
103	/* flush AC97 slot 5 FIFO on pxa machines */
104	#ifdef CONFIG_PXA27x
105	static void wm97xx_acc_pen_up(struct wm97xx *wm)
106	{
107	schedule_timeout_uninterruptible(1);
108
109	while (MISR & (1 << 2))
110	MODR;
111	}
112	#else
113	static void wm97xx_acc_pen_up(struct wm97xx *wm)
114	{
115	int count = 16;
116	schedule_timeout_uninterruptible(1);
117
118	while (count < 16) {
119	MODR;
120	count--;
121	}
122	}
123	#endif
124
125	static int wm97xx_acc_pen_down(struct wm97xx *wm)
126	{
127	u16 x, y, p = 0x100 \| WM97XX_ADCSEL_PRES;
128	int reads = 0;
129
130	/* When the AC97 queue has been drained we need to allow time
131	* to buffer up samples otherwise we end up spinning polling
132	* for samples. The controller can't have a suitably low
133	* threashold set to use the notifications it gives.
134	*/
135	schedule_timeout_uninterruptible(1);
136
137	if (tries > 5) {
138	tries = 0;
139	return RC_PENUP;
140	}
141
142	x = MODR;
143	if (x == last) {
144	tries++;
145	return RC_AGAIN;
146	}
147	last = x;
148	do {
149	if (reads)
150	x = MODR;
151	y = MODR;
152	if (pressure)
153	p = MODR;
154
155	/* are samples valid */
156	if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X \|\|
157	(y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y \|\|
158	(p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
159	goto up;
160
161	/* coordinate is good */
162	tries = 0;
163	input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
164	input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
165	input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
166	input_sync(wm->input_dev);
167	reads++;
168	} while (reads < cinfo[sp_idx].reads);
169	up:
170	return RC_PENDOWN \| RC_AGAIN;
171	}
172
173	static int wm97xx_acc_startup(struct wm97xx *wm)
174	{
175	int idx = 0;
176
177	/* check we have a codec */
178	if (wm->ac97 == NULL)
179	return -ENODEV;
180
181	/* Go you big red fire engine */
182	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
183	if (wm->id != cinfo[idx].id)
184	continue;
185	sp_idx = idx;
186	if (cont_rate <= cinfo[idx].speed)
187	break;
188	}
189	wm->acc_rate = cinfo[sp_idx].code;
190	wm->acc_slot = ac97_touch_slot;
191	dev_info(wm->dev,
192	"mainstone accelerated touchscreen driver, %d samples/sec\n",
193	cinfo[sp_idx].speed);
194
195	/* codec specific irq config */
196	if (pen_int) {
197	switch (wm->id) {
198	case WM9705_ID2:
199	wm->pen_irq = IRQ_GPIO(4);
6cab4860	200	set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH);
4db8a5f2 MB	201	break;
	202	case WM9712_ID2:
	203	case WM9713_ID2:
	204	/* enable pen down interrupt */
	205	/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
	206	wm->pen_irq = MAINSTONE_AC97_IRQ;
	207	wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
	208	WM97XX_GPIO_POL_HIGH,
	209	WM97XX_GPIO_STICKY,
	210	WM97XX_GPIO_WAKE);
	211	wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
	212	WM97XX_GPIO_POL_HIGH,
	213	WM97XX_GPIO_NOTSTICKY,
	214	WM97XX_GPIO_NOWAKE);
	215	break;
	216	default:
	217	dev_err(wm->dev,
	218	"pen down irq not supported on this device\n");
	219	pen_int = 0;
	220	break;
	221	}
	222	}
	223
	224	return 0;
	225	}
	226
	227	static void wm97xx_acc_shutdown(struct wm97xx *wm)
	228	{
	229	/* codec specific deconfig */
	230	if (pen_int) {
	231	switch (wm->id & 0xffff) {
	232	case WM9705_ID2:
	233	wm->pen_irq = 0;
	234	break;
	235	case WM9712_ID2:
	236	case WM9713_ID2:
	237	/* disable interrupt */
	238	wm->pen_irq = 0;
	239	break;
	240	}
	241	}
	242	}
	243
	244	static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
	245	{
	246	if (enable)
	247	enable_irq(wm->pen_irq);
	248	else
	249	disable_irq(wm->pen_irq);
	250	}
	251
	252	static struct wm97xx_mach_ops mainstone_mach_ops = {
	253	.acc_enabled = 1,
	254	.acc_pen_up = wm97xx_acc_pen_up,
	255	.acc_pen_down = wm97xx_acc_pen_down,
	256	.acc_startup = wm97xx_acc_startup,
	257	.acc_shutdown = wm97xx_acc_shutdown,
	258	.irq_enable = wm97xx_irq_enable,
	259	.irq_gpio = WM97XX_GPIO_2,
	260	};
	261
	262	static int mainstone_wm97xx_probe(struct platform_device *pdev)
	263	{
	264	struct wm97xx *wm = platform_get_drvdata(pdev);
265
266	return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
267	}
268
269	static int mainstone_wm97xx_remove(struct platform_device *pdev)
270	{
271	struct wm97xx *wm = platform_get_drvdata(pdev);
272
273	wm97xx_unregister_mach_ops(wm);
274	return 0;
275	}
276
277	static struct platform_driver mainstone_wm97xx_driver = {
278	.probe = mainstone_wm97xx_probe,
279	.remove = mainstone_wm97xx_remove,
280	.driver = {
281	.name = "wm97xx-touch",
282	},
283	};
284
285	static int __init mainstone_wm97xx_init(void)
286	{
287	return platform_driver_register(&mainstone_wm97xx_driver);
288	}
289
290	static void __exit mainstone_wm97xx_exit(void)
291	{
292	platform_driver_unregister(&mainstone_wm97xx_driver);
293	}
294
295	module_init(mainstone_wm97xx_init);
296	module_exit(mainstone_wm97xx_exit);
297
298	/* Module information */
b8d055a8	299	MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
4db8a5f2 MB	300	MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
4db8a5f2 MB	301	MODULE_LICENSE("GPL");