git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| 1da177e4 LT |
1 | /* |
| 2 | * Copyright (C) 2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de> | |
| 3 | */ | |
| 4 | ||
| 5 | /* | |
| 6 | * LK keyboard driver for Linux, based on sunkbd.c (C) by Vojtech Pavlik | |
| 7 | */ | |
| 8 | ||
| 9 | /* | |
| 10 | * DEC LK201 and LK401 keyboard driver for Linux (primary for DECstations | |
| 11 | * and VAXstations, but can also be used on any standard RS232 with an | |
| 12 | * adaptor). | |
| 13 | * | |
| 14 | * DISCLAIMER: This works for _me_. If you break anything by using the | |
| 15 | * information given below, I will _not_ be liable! | |
| 16 | * | |
| 17 | * RJ10 pinout: To DE9: Or DB25: | |
| d083e906 DT |
18 | * 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD) |
| 19 | * 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND) | |
| 20 | * 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD) | |
| 21 | * 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!! | |
| 1da177e4 LT |
22 | * |
| 23 | * Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For | |
| 24 | * RJ10, it's like this: | |
| 25 | * | |
| 26 | * __=__ Hold the plug in front of you, cable downwards, | |
| 27 | * /___/| nose is hidden behind the plug. Now, pin 1 is at | |
| 28 | * |1234|| the left side, pin 4 at the right and 2 and 3 are | |
| 29 | * |IIII|| in between, of course:) | |
| 30 | * | || | |
| 31 | * |____|/ | |
| 32 | * || So the adaptor consists of three connected cables | |
| 33 | * || for data transmission (RxD and TxD) and signal ground. | |
| 34 | * Additionally, you have to get +12V from somewhere. | |
| 35 | * Most easily, you'll get that from a floppy or HDD power connector. | |
| 36 | * It's the yellow cable there (black is ground and red is +5V). | |
| 37 | * | |
| 38 | * The keyboard and all the commands it understands are documented in | |
| 39 | * "VCB02 Video Subsystem - Technical Manual", EK-104AA-TM-001. This | |
| 40 | * document is LK201 specific, but LK401 is mostly compatible. It comes | |
| 41 | * up in LK201 mode and doesn't report any of the additional keys it | |
| 42 | * has. These need to be switched on with the LK_CMD_ENABLE_LK401 | |
| 43 | * command. You'll find this document (scanned .pdf file) on MANX, | |
| 44 | * a search engine specific to DEC documentation. Try | |
| 45 | * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1 | |
| 46 | */ | |
| 47 | ||
| 48 | /* | |
| 49 | * This program is free software; you can redistribute it and/or modify | |
| 50 | * it under the terms of the GNU General Public License as published by | |
| 51 | * the Free Software Foundation; either version 2 of the License, or | |
| 52 | * (at your option) any later version. | |
| 53 | * | |
| 54 | * This program is distributed in the hope that it will be useful, | |
| 55 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 56 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 57 | * GNU General Public License for more details. | |
| 58 | * | |
| 59 | * You should have received a copy of the GNU General Public License | |
| 60 | * along with this program; if not, write to the Free Software | |
| 61 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| 62 | * | |
| 63 | * Should you need to contact me, the author, you can do so either by | |
| 64 | * email or by paper mail: | |
| 65 |