[net-next-2.6.git] / drivers / hwmon / lm83.c

/*
 * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
 *          monitoring
 * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
 *
 * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
 * a sensor chip made by National Semiconductor. It reports up to four
 * temperatures (its own plus up to three external ones) with a 1 deg
 * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
 * from National's website at:
 *   http://www.national.com/pf/LM/LM83.html
 * Since the datasheet omits to give the chip stepping code, I give it
 * here: 0x03 (at register 0xff).
 *
 * Also supports the LM82 temp sensor, which is basically a stripped down
 * model of the LM83.  Datasheet is here:
 * http://www.national.com/pf/LM/LM82.html
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>

/*
 * Addresses to scan
 * Address is selected using 2 three-level pins, resulting in 9 possible
 * addresses.
 */

static const unsigned short normal_i2c[] = {
	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };

/*
 * Insmod parameters
 */

I2C_CLIENT_INSMOD_2(lm83, lm82);

/*
 * The LM83 registers
 * Manufacturer ID is 0x01 for National Semiconductor.
 */

#define LM83_REG_R_MAN_ID		0xFE
#define LM83_REG_R_CHIP_ID		0xFF
#define LM83_REG_R_CONFIG		0x03
#define LM83_REG_W_CONFIG		0x09
#define LM83_REG_R_STATUS1		0x02
#define LM83_REG_R_STATUS2		0x35
#define LM83_REG_R_LOCAL_TEMP		0x00
#define LM83_REG_R_LOCAL_HIGH		0x05
#define LM83_REG_W_LOCAL_HIGH		0x0B
#define LM83_REG_R_REMOTE1_TEMP		0x30
#define LM83_REG_R_REMOTE1_HIGH		0x38
#define LM83_REG_W_REMOTE1_HIGH		0x50
#define LM83_REG_R_REMOTE2_TEMP		0x01
#define LM83_REG_R_REMOTE2_HIGH		0x07
#define LM83_REG_W_REMOTE2_HIGH		0x0D
#define LM83_REG_R_REMOTE3_TEMP		0x31
#define LM83_REG_R_REMOTE3_HIGH		0x3A
#define LM83_REG_W_REMOTE3_HIGH		0x52
#define LM83_REG_R_TCRIT		0x42
#define LM83_REG_W_TCRIT		0x5A

/*
 * Conversions and various macros
 * The LM83 uses signed 8-bit values with LSB = 1 degree Celsius.
 */

#define TEMP_FROM_REG(val)	((val) * 1000)
#define TEMP_TO_REG(val)	((val) <= -128000 ? -128 : \
				 (val) >= 127000 ? 127 : \
				 (val) < 0 ? ((val) - 500) / 1000 : \
				 ((val) + 500) / 1000)

static const u8 LM83_REG_R_TEMP[] = {
	LM83_REG_R_LOCAL_TEMP,
	LM83_REG_R_REMOTE1_TEMP,
	LM83_REG_R_REMOTE2_TEMP,
	LM83_REG_R_REMOTE3_TEMP,
	LM83_REG_R_LOCAL_HIGH,
	LM83_REG_R_REMOTE1_HIGH,
	LM83_REG_R_REMOTE2_HIGH,
	LM83_REG_R_REMOTE3_HIGH,
	LM83_REG_R_TCRIT,
};

static const u8 LM83_REG_W_HIGH[] = {
	LM83_REG_W_LOCAL_HIGH,
	LM83_REG_W_REMOTE1_HIGH,
	LM83_REG_W_REMOTE2_HIGH,
	LM83_REG_W_REMOTE3_HIGH,
	LM83_REG_W_TCRIT,
};

/*
 * Functions declaration
 */

static int lm83_detect(struct i2c_client *new_client, int kind,
		       struct i2c_board_info *info);
static int lm83_probe(struct i2c_client *client,
		      const struct i2c_device_id *id);
static int lm83_remove(struct i2c_client *client);
static struct lm83_data *lm83_update_device(struct device *dev);

/*
 * Driver data (common to all clients)
 */
 
static const struct i2c_device_id lm83_id[] = {
	{ "lm83", lm83 },
	{ "lm82", lm82 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, lm83_id);

static struct i2c_driver lm83_driver = {
	.class		= I2C_CLASS_HWMON,
	.driver = {
		.name	= "lm83",
	},
	.probe		= lm83_probe,
	.remove		= lm83_remove,
	.id_table	= lm83_id,
	.detect		= lm83_detect,
	.address_data	= &addr_data,
};

/*
 * Client data (each client gets its own)
 */

struct lm83_data {
	struct device *hwmon_dev;
	struct mutex update_lock;
	char valid; /* zero until following fields are valid */
	unsigned long last_updated; /* in jiffies */

	/* registers values */
	s8 temp[9];	/* 0..3: input 1-4,
			   4..7: high limit 1-4,
			   8   : critical limit */
	u16 alarms; /* bitvector, combined */
};

/*
 * Sysfs stuff
 */

static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
			 char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	struct lm83_data *data = lm83_update_device(dev);
	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
}

static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
			const char *buf, size_t count)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	struct i2c_client *client = to_i2c_client(dev);
	struct lm83_data *data = i2c_get_clientdata(client);
	long val = simple_strtol(buf, NULL, 10);
	int nr = attr->index;

	mutex_lock(&data->update_lock);
	data->temp[nr] = TEMP_TO_REG(val);
	i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
				  data->temp[nr]);
	mutex_unlock(&data->update_lock);
	return count;
}

static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
			   char *buf)
{
	struct lm83_data *data = lm83_update_device(dev);
	return sprintf(buf, "%d\n", data->alarms);
}

static ssize_t show_alarm(struct device *dev, struct device_attribute
			  *devattr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	struct lm83_data *data = lm83_update_device(dev);
	int bitnr = attr->index;

	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
}

static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp,
	set_temp, 4);
static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp,
	set_temp, 5);
static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp,
	set_temp, 6);
static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp,
	set_temp, 7);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 8);
static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8);
static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
	set_temp, 8);
static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);

/* Individual alarm files */
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15);
/* Raw alarm file for compatibility */
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);

static struct attribute *lm83_attributes[] = {
	&sensor_dev_attr_temp1_input.dev_attr.attr,
	&sensor_dev_attr_temp3_input.dev_attr.attr,
	&sensor_dev_attr_temp1_max.dev_attr.attr,
	&sensor_dev_attr_temp3_max.dev_attr.attr,
	&sensor_dev_attr_temp1_crit.dev_attr.attr,
	&sensor_dev_attr_temp3_crit.dev_attr.attr,

	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
	&sensor_dev_attr_temp3_fault.dev_attr.attr,
	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
	&dev_attr_alarms.attr,
	NULL
};

static const struct attribute_group lm83_group = {
	.attrs = lm83_attributes,
};

static struct attribute *lm83_attributes_opt[] = {
	&sensor_dev_attr_temp2_input.dev_attr.attr,
	&sensor_dev_attr_temp4_input.dev_attr.attr,
	&sensor_dev_attr_temp2_max.dev_attr.attr,
	&sensor_dev_attr_temp4_max.dev_attr.attr,
	&sensor_dev_attr_temp2_crit.dev_attr.attr,
	&sensor_dev_attr_temp4_crit.dev_attr.attr,

	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
	&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
	&sensor_dev_attr_temp4_fault.dev_attr.attr,
	&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
	&sensor_dev_attr_temp2_fault.dev_attr.attr,
	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
	NULL
};

static const struct attribute_group lm83_group_opt = {
	.attrs = lm83_attributes_opt,
};

/*
 * Real code
 */

/* Return 0 if detection is successful, -ENODEV otherwise */
static int lm83_detect(struct i2c_client *new_client, int kind,
		       struct i2c_board_info *info)
{
	struct i2c_adapter *adapter = new_client->adapter;
	const char *name = "";

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
		return -ENODEV;

	/* Now we do the detection and identification. A negative kind
	 * means that the driver was loaded with no force parameter
	 * (default), so we must both detect and identify the chip
	 * (actually there is only one possible kind of chip for now, LM83).
	 * A zero kind means that the driver was loaded with the force
	 * parameter, the detection step shall be skipped. A positive kind
	 * means that the driver was loaded with the force parameter and a
	 * given kind of chip is requested, so both the detection and the
	 * identification steps are skipped. */

	/* Default to an LM83 if forced */
	if (kind == 0)
		kind = lm83;

	if (kind < 0) { /* detection */
		if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
		    & 0xA8) != 0x00) ||
		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
		    & 0x48) != 0x00) ||
		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
		    & 0x41) != 0x00)) {
			dev_dbg(&adapter->dev,
				"LM83 detection failed at 0x%02x.\n",
				new_client->addr);
			return -ENODEV;
		}
	}

	if (kind <= 0) { /* identification */
		u8 man_id, chip_id;

		man_id = i2c_smbus_read_byte_data(new_client,
		    LM83_REG_R_MAN_ID);
		chip_id = i2c_smbus_read_byte_data(new_client,
		    LM83_REG_R_CHIP_ID);

		if (man_id == 0x01) { /* National Semiconductor */
			if (chip_id == 0x03) {
				kind = lm83;
			} else
			if (chip_id == 0x01) {
				kind = lm82;
			}
		}

		if (kind <= 0) { /* identification failed */
			dev_info(&adapter->dev,
			    "Unsupported chip (man_id=0x%02X, "
			    "chip_id=0x%02X).\n", man_id, chip_id);
			return -ENODEV;
		}
	}

	if (kind == lm83) {
		name = "lm83";
	} else
	if (kind == lm82) {
		name = "lm82";
	}

	strlcpy(info->type, name, I2C_NAME_SIZE);

	return 0;
}

static int lm83_probe(struct i2c_client *new_client,
		      const struct i2c_device_id *id)
{
	struct lm83_data *data;
	int err;

	data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL);
	if (!data) {
		err = -ENOMEM;
		goto exit;
	}

	i2c_set_clientdata(new_client, data);
	data->valid = 0;
	mutex_init(&data->update_lock);

	/*
	 * Register sysfs hooks
	 * The LM82 can only monitor one external diode which is
	 * at the same register as the LM83 temp3 entry - so we
	 * declare 1 and 3 common, and then 2 and 4 only for the LM83.
	 */

	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group)))
		goto exit_free;

	if (id->driver_data == lm83) {
		if ((err = sysfs_create_group(&new_client->dev.kobj,
					      &lm83_group_opt)))
			goto exit_remove_files;
	}

	data->hwmon_dev = hwmon_device_register(&new_client->dev);
	if (IS_ERR(data->hwmon_dev)) {
		err = PTR_ERR(data->hwmon_dev);
		goto exit_remove_files;
	}

	return 0;

exit_remove_files:
	sysfs_remove_group(&new_client->dev.kobj, &lm83_group);
	sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt);
exit_free:
	kfree(data);
exit:
	return err;
}

static int lm83_remove(struct i2c_client *client)
{
	struct lm83_data *data = i2c_get_clientdata(client);

	hwmon_device_unregister(data->hwmon_dev);
	sysfs_remove_group(&client->dev.kobj, &lm83_group);
	sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);

	kfree(data);
	return 0;
}

static struct lm83_data *lm83_update_device(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct lm83_data *data = i2c_get_clientdata(client);

	mutex_lock(&data->update_lock);

	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
		int nr;

		dev_dbg(&client->dev, "Updating lm83 data.\n");
		for (nr = 0; nr < 9; nr++) {
			data->temp[nr] =
			    i2c_smbus_read_byte_data(client,
			    LM83_REG_R_TEMP[nr]);
		}
		data->alarms =
		    i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1)
		    + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2)
		    << 8);

		data->last_updated = jiffies;
		data->valid = 1;
	}

	mutex_unlock(&data->update_lock);

	return data;
}

static int __init sensors_lm83_init(void)
{
	return i2c_add_driver(&lm83_driver);
}

static void __exit sensors_lm83_exit(void)
{
	i2c_del_driver(&lm83_driver);
}

MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("LM83 driver");
MODULE_LICENSE("GPL");

module_init(sensors_lm83_init);
module_exit(sensors_lm83_exit);
Commit	Line	Data
1da177e4 LT	1	/*
	2	* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
	3	* monitoring
b6aacdce	4	* Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
1da177e4 LT	5	*
	6	* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
	7	* a sensor chip made by National Semiconductor. It reports up to four
	8	* temperatures (its own plus up to three external ones) with a 1 deg
	9	* resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
	10	* from National's website at:
	11	* http://www.national.com/pf/LM/LM83.html
	12	* Since the datasheet omits to give the chip stepping code, I give it
	13	* here: 0x03 (at register 0xff).
	14	*
43cb7ebe JC	15	* Also supports the LM82 temp sensor, which is basically a stripped down
	16	* model of the LM83. Datasheet is here:
	17	* http://www.national.com/pf/LM/LM82.html
	18	*
1da177e4 LT	19	* This program is free software; you can redistribute it and/or modify
	20	* it under the terms of the GNU General Public License as published by
	21	* the Free Software Foundation; either version 2 of the License, or
	22	* (at your option) any later version.
	23	*
	24	* This program is distributed in the hope that it will be useful,
	25	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	26	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	27	* GNU General Public License for more details.
	28	*
	29	* You should have received a copy of the GNU General Public License
	30	* along with this program; if not, write to the Free Software
	31	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	32	*/
	33
1da177e4 LT	34	#include <linux/module.h>
	35	#include <linux/init.h>
	36	#include <linux/slab.h>
	37	#include <linux/jiffies.h>
	38	#include <linux/i2c.h>
10c08f81	39	#include <linux/hwmon-sysfs.h>
943b0830 MH	40	#include <linux/hwmon.h>
943b0830 MH	41	#include <linux/err.h>
9a61bf63	42	#include <linux/mutex.h>
0e39e01c	43	#include <linux/sysfs.h>
1da177e4 LT	44
	45	/*
	46	* Addresses to scan
	47	* Address is selected using 2 three-level pins, resulting in 9 possible
	48	* addresses.
	49	*/
	50
25e9c86d MH	51	static const unsigned short normal_i2c[] = {
25e9c86d MH	52	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
1da177e4 LT	53
	54	/*
	55	* Insmod parameters
	56	*/
	57
43cb7ebe	58	I2C_CLIENT_INSMOD_2(lm83, lm82);
1da177e4 LT	59
	60	/*
	61	* The LM83 registers
	62	* Manufacturer ID is 0x01 for National Semiconductor.
	63	*/
	64
	65	#define LM83_REG_R_MAN_ID 0xFE
	66	#define LM83_REG_R_CHIP_ID 0xFF
	67	#define LM83_REG_R_CONFIG 0x03
	68	#define LM83_REG_W_CONFIG 0x09
	69	#define LM83_REG_R_STATUS1 0x02
	70	#define LM83_REG_R_STATUS2 0x35
	71	#define LM83_REG_R_LOCAL_TEMP 0x00
	72	#define LM83_REG_R_LOCAL_HIGH 0x05
	73	#define LM83_REG_W_LOCAL_HIGH 0x0B
	74	#define LM83_REG_R_REMOTE1_TEMP 0x30
	75	#define LM83_REG_R_REMOTE1_HIGH 0x38
	76	#define LM83_REG_W_REMOTE1_HIGH 0x50
	77	#define LM83_REG_R_REMOTE2_TEMP 0x01
	78	#define LM83_REG_R_REMOTE2_HIGH 0x07
	79	#define LM83_REG_W_REMOTE2_HIGH 0x0D
	80	#define LM83_REG_R_REMOTE3_TEMP 0x31
	81	#define LM83_REG_R_REMOTE3_HIGH 0x3A
	82	#define LM83_REG_W_REMOTE3_HIGH 0x52
	83	#define LM83_REG_R_TCRIT 0x42
	84	#define LM83_REG_W_TCRIT 0x5A
	85
	86	/*
	87	* Conversions and various macros
44bbe87e	88	* The LM83 uses signed 8-bit values with LSB = 1 degree Celsius.
1da177e4 LT	89	*/
	90
	91	#define TEMP_FROM_REG(val) ((val) * 1000)
	92	#define TEMP_TO_REG(val) ((val) <= -128000 ? -128 : \
	93	(val) >= 127000 ? 127 : \
	94	(val) < 0 ? ((val) - 500) / 1000 : \
	95	((val) + 500) / 1000)
	96
	97	static const u8 LM83_REG_R_TEMP[] = {
	98	LM83_REG_R_LOCAL_TEMP,
	99	LM83_REG_R_REMOTE1_TEMP,
	100	LM83_REG_R_REMOTE2_TEMP,
1a86c051	101	LM83_REG_R_REMOTE3_TEMP,
1da177e4 LT	102	LM83_REG_R_LOCAL_HIGH,
	103	LM83_REG_R_REMOTE1_HIGH,
	104	LM83_REG_R_REMOTE2_HIGH,
1a86c051 JD	105	LM83_REG_R_REMOTE3_HIGH,
1a86c051 JD	106	LM83_REG_R_TCRIT,
1da177e4 LT	107	};
	108
	109	static const u8 LM83_REG_W_HIGH[] = {
	110	LM83_REG_W_LOCAL_HIGH,
	111	LM83_REG_W_REMOTE1_HIGH,
	112	LM83_REG_W_REMOTE2_HIGH,
1a86c051 JD	113	LM83_REG_W_REMOTE3_HIGH,
1a86c051 JD	114	LM83_REG_W_TCRIT,
1da177e4 LT	115	};
	116
	117	/*
	118	* Functions declaration
	119	*/
	120
b6aacdce JD	121	static int lm83_detect(struct i2c_client *new_client, int kind,
	122	struct i2c_board_info *info);
	123	static int lm83_probe(struct i2c_client *client,
	124	const struct i2c_device_id *id);
	125	static int lm83_remove(struct i2c_client *client);
1da177e4 LT	126	static struct lm83_data lm83_update_device(struct device dev);
	127
	128	/*
	129	* Driver data (common to all clients)
	130	*/
	131
b6aacdce JD	132	static const struct i2c_device_id lm83_id[] = {
	133	{ "lm83", lm83 },
	134	{ "lm82", lm82 },
	135	{ }
	136	};
	137	MODULE_DEVICE_TABLE(i2c, lm83_id);
	138
1da177e4	139	static struct i2c_driver lm83_driver = {
b6aacdce	140	.class = I2C_CLASS_HWMON,
cdaf7934	141	.driver = {
cdaf7934 LR	142	.name = "lm83",
cdaf7934 LR	143	},
b6aacdce JD	144	.probe = lm83_probe,
	145	.remove = lm83_remove,
	146	.id_table = lm83_id,
	147	.detect = lm83_detect,
	148	.address_data = &addr_data,
1da177e4 LT	149	};
	150
	151	/*
	152	* Client data (each client gets its own)
	153	*/
	154
	155	struct lm83_data {
1beeffe4	156	struct device *hwmon_dev;
9a61bf63	157	struct mutex update_lock;
1da177e4 LT	158	char valid; /* zero until following fields are valid */
	159	unsigned long last_updated; /* in jiffies */
	160
	161	/* registers values */
1a86c051 JD	162	s8 temp[9]; /* 0..3: input 1-4,
	163	4..7: high limit 1-4,
	164	8 : critical limit */
1da177e4 LT	165	u16 alarms; /* bitvector, combined */
	166	};
	167
	168	/*
	169	* Sysfs stuff
	170	*/
	171
1a86c051 JD	172	static ssize_t show_temp(struct device dev, struct device_attribute devattr,
	173	char *buf)
	174	{
	175	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	176	struct lm83_data *data = lm83_update_device(dev);
	177	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
1da177e4	178	}
1a86c051 JD	179
	180	static ssize_t set_temp(struct device dev, struct device_attribute devattr,
	181	const char *buf, size_t count)
	182	{
	183	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	184	struct i2c_client *client = to_i2c_client(dev);
	185	struct lm83_data *data = i2c_get_clientdata(client);
	186	long val = simple_strtol(buf, NULL, 10);
	187	int nr = attr->index;
	188
9a61bf63	189	mutex_lock(&data->update_lock);
1a86c051 JD	190	data->temp[nr] = TEMP_TO_REG(val);
	191	i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
	192	data->temp[nr]);
9a61bf63	193	mutex_unlock(&data->update_lock);
1a86c051	194	return count;
1da177e4	195	}
1da177e4	196
1a86c051 JD	197	static ssize_t show_alarms(struct device dev, struct device_attribute dummy,
1a86c051 JD	198	char *buf)
1da177e4 LT	199	{
	200	struct lm83_data *data = lm83_update_device(dev);
	201	return sprintf(buf, "%d\n", data->alarms);
	202	}
	203
2d45771e JD	204	static ssize_t show_alarm(struct device *dev, struct device_attribute
	205	devattr, char buf)
	206	{
	207	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	208	struct lm83_data *data = lm83_update_device(dev);
	209	int bitnr = attr->index;
	210
	211	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
	212	}
	213
1a86c051 JD	214	static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
	215	static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
	216	static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
	217	static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
	218	static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR \| S_IRUGO, show_temp,
	219	set_temp, 4);
	220	static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR \| S_IRUGO, show_temp,
	221	set_temp, 5);
	222	static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR \| S_IRUGO, show_temp,
	223	set_temp, 6);
	224	static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR \| S_IRUGO, show_temp,
	225	set_temp, 7);
	226	static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 8);
	227	static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8);
	228	static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR \| S_IRUGO, show_temp,
	229	set_temp, 8);
	230	static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);
2d45771e JD	231
	232	/* Individual alarm files */
	233	static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
	234	static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
7817a39e	235	static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
2d45771e JD	236	static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
	237	static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
	238	static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
	239	static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
7817a39e	240	static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, 10);
2d45771e	241	static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12);
7817a39e	242	static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 13);
2d45771e JD	243	static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15);
2d45771e JD	244	/* Raw alarm file for compatibility */
1da177e4 LT	245	static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
1da177e4 LT	246
0e39e01c JD	247	static struct attribute *lm83_attributes[] = {
	248	&sensor_dev_attr_temp1_input.dev_attr.attr,
	249	&sensor_dev_attr_temp3_input.dev_attr.attr,
	250	&sensor_dev_attr_temp1_max.dev_attr.attr,
	251	&sensor_dev_attr_temp3_max.dev_attr.attr,
	252	&sensor_dev_attr_temp1_crit.dev_attr.attr,
	253	&sensor_dev_attr_temp3_crit.dev_attr.attr,
	254
	255	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
	256	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
7817a39e	257	&sensor_dev_attr_temp3_fault.dev_attr.attr,
0e39e01c JD	258	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
	259	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
	260	&dev_attr_alarms.attr,
	261	NULL
	262	};
	263
	264	static const struct attribute_group lm83_group = {
	265	.attrs = lm83_attributes,
	266	};
	267
	268	static struct attribute *lm83_attributes_opt[] = {
	269	&sensor_dev_attr_temp2_input.dev_attr.attr,
	270	&sensor_dev_attr_temp4_input.dev_attr.attr,
	271	&sensor_dev_attr_temp2_max.dev_attr.attr,
	272	&sensor_dev_attr_temp4_max.dev_attr.attr,
	273	&sensor_dev_attr_temp2_crit.dev_attr.attr,
	274	&sensor_dev_attr_temp4_crit.dev_attr.attr,
	275
	276	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
	277	&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
7817a39e	278	&sensor_dev_attr_temp4_fault.dev_attr.attr,
0e39e01c	279	&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
7817a39e	280	&sensor_dev_attr_temp2_fault.dev_attr.attr,
0e39e01c JD	281	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
	282	NULL
	283	};
	284
	285	static const struct attribute_group lm83_group_opt = {
	286	.attrs = lm83_attributes_opt,
	287	};
	288
1da177e4 LT	289	/*
	290	* Real code
	291	*/
	292
b6aacdce JD	293	/* Return 0 if detection is successful, -ENODEV otherwise */
	294	static int lm83_detect(struct i2c_client *new_client, int kind,
	295	struct i2c_board_info *info)
1da177e4	296	{
b6aacdce	297	struct i2c_adapter *adapter = new_client->adapter;
1da177e4 LT	298	const char *name = "";
	299
	300	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
b6aacdce	301	return -ENODEV;
1da177e4 LT	302
	303	/* Now we do the detection and identification. A negative kind
	304	* means that the driver was loaded with no force parameter
	305	* (default), so we must both detect and identify the chip
	306	* (actually there is only one possible kind of chip for now, LM83).
	307	* A zero kind means that the driver was loaded with the force
	308	* parameter, the detection step shall be skipped. A positive kind
	309	* means that the driver was loaded with the force parameter and a
	310	* given kind of chip is requested, so both the detection and the
	311	* identification steps are skipped. */
	312
	313	/* Default to an LM83 if forced */
	314	if (kind == 0)
	315	kind = lm83;
	316
	317	if (kind < 0) { /* detection */
	318	if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
	319	& 0xA8) != 0x00) \|\|
	320	((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
	321	& 0x48) != 0x00) \|\|
	322	((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
	323	& 0x41) != 0x00)) {
	324	dev_dbg(&adapter->dev,
b6aacdce JD	325	"LM83 detection failed at 0x%02x.\n",
	326	new_client->addr);
	327	return -ENODEV;
1da177e4 LT	328	}
	329	}
	330
	331	if (kind <= 0) { /* identification */
	332	u8 man_id, chip_id;
	333
	334	man_id = i2c_smbus_read_byte_data(new_client,
	335	LM83_REG_R_MAN_ID);
	336	chip_id = i2c_smbus_read_byte_data(new_client,
	337	LM83_REG_R_CHIP_ID);
	338
	339	if (man_id == 0x01) { /* National Semiconductor */
	340	if (chip_id == 0x03) {
	341	kind = lm83;
43cb7ebe JC	342	} else
	343	if (chip_id == 0x01) {
	344	kind = lm82;
1da177e4 LT	345	}
	346	}
	347
	348	if (kind <= 0) { /* identification failed */
	349	dev_info(&adapter->dev,
	350	"Unsupported chip (man_id=0x%02X, "
	351	"chip_id=0x%02X).\n", man_id, chip_id);
b6aacdce	352	return -ENODEV;
1da177e4 LT	353	}
	354	}
	355
	356	if (kind == lm83) {
	357	name = "lm83";
43cb7ebe JC	358	} else
	359	if (kind == lm82) {
	360	name = "lm82";
1da177e4 LT	361	}
1da177e4 LT	362
b6aacdce JD	363	strlcpy(info->type, name, I2C_NAME_SIZE);
	364
	365	return 0;
	366	}
	367
	368	static int lm83_probe(struct i2c_client *new_client,
	369	const struct i2c_device_id *id)
	370	{
	371	struct lm83_data *data;
	372	int err;
	373
	374	data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL);
	375	if (!data) {
	376	err = -ENOMEM;
	377	goto exit;
	378	}
	379
	380	i2c_set_clientdata(new_client, data);
1da177e4	381	data->valid = 0;
9a61bf63	382	mutex_init(&data->update_lock);
1da177e4	383
1da177e4	384	/*
0e39e01c	385	* Register sysfs hooks
43cb7ebe JC	386	* The LM82 can only monitor one external diode which is
	387	* at the same register as the LM83 temp3 entry - so we
	388	* declare 1 and 3 common, and then 2 and 4 only for the LM83.
	389	*/
	390
0e39e01c	391	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group)))
b6aacdce	392	goto exit_free;
1da177e4	393
b6aacdce	394	if (id->driver_data == lm83) {
0e39e01c JD	395	if ((err = sysfs_create_group(&new_client->dev.kobj,
	396	&lm83_group_opt)))
	397	goto exit_remove_files;
	398	}
	399
1beeffe4 TJ	400	data->hwmon_dev = hwmon_device_register(&new_client->dev);
	401	if (IS_ERR(data->hwmon_dev)) {
	402	err = PTR_ERR(data->hwmon_dev);
0e39e01c	403	goto exit_remove_files;
43cb7ebe JC	404	}
43cb7ebe JC	405
1da177e4 LT	406	return 0;
1da177e4 LT	407
0e39e01c JD	408	exit_remove_files:
	409	sysfs_remove_group(&new_client->dev.kobj, &lm83_group);
	410	sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt);
1da177e4 LT	411	exit_free:
	412	kfree(data);
	413	exit:
	414	return err;
	415	}
	416
b6aacdce	417	static int lm83_remove(struct i2c_client *client)
1da177e4	418	{
943b0830	419	struct lm83_data *data = i2c_get_clientdata(client);
1da177e4	420
1beeffe4	421	hwmon_device_unregister(data->hwmon_dev);
0e39e01c JD	422	sysfs_remove_group(&client->dev.kobj, &lm83_group);
0e39e01c JD	423	sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);
943b0830	424
943b0830	425	kfree(data);
1da177e4 LT	426	return 0;
	427	}
	428
	429	static struct lm83_data lm83_update_device(struct device dev)
	430	{
	431	struct i2c_client *client = to_i2c_client(dev);
	432	struct lm83_data *data = i2c_get_clientdata(client);
	433
9a61bf63	434	mutex_lock(&data->update_lock);
1da177e4 LT	435
	436	if (time_after(jiffies, data->last_updated + HZ * 2) \|\| !data->valid) {
	437	int nr;
	438
	439	dev_dbg(&client->dev, "Updating lm83 data.\n");
1a86c051 JD	440	for (nr = 0; nr < 9; nr++) {
1a86c051 JD	441	data->temp[nr] =
1da177e4 LT	442	i2c_smbus_read_byte_data(client,
1da177e4 LT	443	LM83_REG_R_TEMP[nr]);
1da177e4	444	}
1da177e4 LT	445	data->alarms =
	446	i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1)
	447	+ (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2)
	448	<< 8);
	449
	450	data->last_updated = jiffies;
	451	data->valid = 1;
	452	}
	453
9a61bf63	454	mutex_unlock(&data->update_lock);
1da177e4 LT	455
	456	return data;
	457	}
	458
	459	static int __init sensors_lm83_init(void)
	460	{
	461	return i2c_add_driver(&lm83_driver);
	462	}
	463
	464	static void __exit sensors_lm83_exit(void)
	465	{
	466	i2c_del_driver(&lm83_driver);
	467	}
	468
	469	MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
	470	MODULE_DESCRIPTION("LM83 driver");
	471	MODULE_LICENSE("GPL");
	472
	473	module_init(sensors_lm83_init);
	474	module_exit(sensors_lm83_exit);