[net-next-2.6.git] / drivers / gpu / drm / Kconfig

#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig DRM
	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
	depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
	select I2C
	select I2C_ALGOBIT
	help
	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
	  introduced in XFree86 4.0. If you say Y here, you need to select
	  the module that's right for your graphics card from the list below.
	  These modules provide support for synchronization, security, and
	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
	  details.  You should also select and configure AGP
	  (/dev/agpgart) support.

config DRM_TDFX
	tristate "3dfx Banshee/Voodoo3+"
	depends on DRM && PCI
	help
	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	  graphics card.  If M is selected, the module will be called tdfx.

config DRM_R128
	tristate "ATI Rage 128"
	depends on DRM && PCI
	help
	  Choose this option if you have an ATI Rage 128 graphics card.  If M
	  is selected, the module will be called r128.  AGP support for
	  this card is strongly suggested (unless you have a PCI version).

config DRM_RADEON
	tristate "ATI Radeon"
	depends on DRM && PCI
	help
	  Choose this option if you have an ATI Radeon graphics card.  There
	  are both PCI and AGP versions.  You don't need to choose this to
	  run the Radeon in plain VGA mode.

	  If M is selected, the module will be called radeon.

config DRM_I810
	tristate "Intel I810"
	depends on DRM && AGP && AGP_INTEL
	help
	  Choose this option if you have an Intel I810 graphics card.  If M is
	  selected, the module will be called i810.  AGP support is required
	  for this driver to work.

choice
	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
	depends on DRM && AGP && AGP_INTEL
	optional

config DRM_I830
	tristate "i830 driver"
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM or 865G integrated graphics.  If M is selected, the
	  module will be called i830.  AGP support is required for this driver
	  to work. This driver is used by the older X releases X.org 6.7 and
	  XFree86 4.3. If unsure, build this and i915 as modules and the X server
	  will load the correct one.

config DRM_I915
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	select FB
	select FRAMEBUFFER_CONSOLE if !EMBEDDED
	tristate "i915 driver"
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
	  module will be called i915.  AGP support is required for this driver
	  to work. This driver is used by the Intel driver in X.org 6.8 and
	  XFree86 4.4 and above. If unsure, build this and i830 as modules and
	  the X server will load the correct one.

config DRM_I915_KMS
	bool "Enable modesetting on intel by default"
	depends on DRM_I915
	# i915 KMS depends on ACPI_VIDEO when ACPI is enabled
	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	select VIDEO_OUTPUT_CONTROL if ACPI
	select BACKLIGHT_CLASS_DEVICE if ACPI
	select INPUT if ACPI
	select ACPI_VIDEO if ACPI
	help
	  Choose this option if you want kernel modesetting enabled by default,
	  and you have a new enough userspace to support this. Running old
	  userspaces with this enabled will cause pain.  Note that this causes
	  the driver to bind to PCI devices, which precludes loading things
	  like intelfb.

endchoice

config DRM_MGA
	tristate "Matrox g200/g400"
	depends on DRM
	help
	  Choose this option if you have a Matrox G200, G400 or G450 graphics
	  card.  If M is selected, the module will be called mga.  AGP
	  support is required for this driver to work.

config DRM_SIS
	tristate "SiS video cards"
	depends on DRM && AGP
	depends on FB_SIS || FB_SIS=n
	help
	  Choose this option if you have a SiS 630 or compatible video
          chipset. If M is selected the module will be called sis. AGP
          support is required for this driver to work.

config DRM_VIA
	tristate "Via unichrome video cards"
	depends on DRM
	help
	  Choose this option if you have a Via unichrome or compatible video
	  chipset. If M is selected the module will be called via.

config DRM_SAVAGE
	tristate "Savage video cards"
	depends on DRM
	help
	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	  chipset. If M is selected the module will be called savage.
Commit	Line	Data
1da177e4 LT	1	#
	2	# Drm device configuration
	3	#
	4	# This driver provides support for the
	5	# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
	6	#
179b025f	7	menuconfig DRM
1da177e4	8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
e798ba57	9	depends on (AGP \|\| AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
57a6297e DA	10	select I2C
57a6297e DA	11	select I2C_ALGOBIT
1da177e4 LT	12	help
	13	Kernel-level support for the Direct Rendering Infrastructure (DRI)
	14	introduced in XFree86 4.0. If you say Y here, you need to select
	15	the module that's right for your graphics card from the list below.
	16	These modules provide support for synchronization, security, and
	17	DMA transfers. Please see <http://dri.sourceforge.net/> for more
	18	details. You should also select and configure AGP
	19	(/dev/agpgart) support.
	20
	21	config DRM_TDFX
	22	tristate "3dfx Banshee/Voodoo3+"
	23	depends on DRM && PCI
	24	help
	25	Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	26	graphics card. If M is selected, the module will be called tdfx.
	27
1da177e4 LT	28	config DRM_R128
	29	tristate "ATI Rage 128"
	30	depends on DRM && PCI
	31	help
	32	Choose this option if you have an ATI Rage 128 graphics card. If M
	33	is selected, the module will be called r128. AGP support for
	34	this card is strongly suggested (unless you have a PCI version).
	35
	36	config DRM_RADEON
	37	tristate "ATI Radeon"
	38	depends on DRM && PCI
	39	help
	40	Choose this option if you have an ATI Radeon graphics card. There
	41	are both PCI and AGP versions. You don't need to choose this to
7b9af345	42	run the Radeon in plain VGA mode.
bc5f4523	43
1da177e4 LT	44	If M is selected, the module will be called radeon.
	45
	46	config DRM_I810
	47	tristate "Intel I810"
	48	depends on DRM && AGP && AGP_INTEL
	49	help
	50	Choose this option if you have an Intel I810 graphics card. If M is
	51	selected, the module will be called i810. AGP support is required
	52	for this driver to work.
	53
	54	choice
	55	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
	56	depends on DRM && AGP && AGP_INTEL
	57	optional
	58
	59	config DRM_I830
	60	tristate "i830 driver"
	61	help
	62	Choose this option if you have a system that has Intel 830M, 845G,
	63	852GM, 855GM or 865G integrated graphics. If M is selected, the
	64	module will be called i830. AGP support is required for this driver
d000b486 DA	65	to work. This driver is used by the older X releases X.org 6.7 and
	66	XFree86 4.3. If unsure, build this and i915 as modules and the X server
	67	will load the correct one.
1da177e4 LT	68
1da177e4 LT	69	config DRM_I915
06d9f33c EA	70	select FB_CFB_FILLRECT
	71	select FB_CFB_COPYAREA
	72	select FB_CFB_IMAGEBLIT
d2f59357	73	select FB
f29ce727	74	select FRAMEBUFFER_CONSOLE if !EMBEDDED
1da177e4 LT	75	tristate "i915 driver"
	76	help
	77	Choose this option if you have a system that has Intel 830M, 845G,
	78	852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
	79	module will be called i915. AGP support is required for this driver
d000b486	80	to work. This driver is used by the Intel driver in X.org 6.8 and
bc5f4523	81	XFree86 4.4 and above. If unsure, build this and i830 as modules and
d000b486	82	the X server will load the correct one.
bc5f4523	83
79e53945 JB	84	config DRM_I915_KMS
	85	bool "Enable modesetting on intel by default"
	86	depends on DRM_I915
ecb4aed7 LB	87	# i915 KMS depends on ACPI_VIDEO when ACPI is enabled
	88	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	89	select VIDEO_OUTPUT_CONTROL if ACPI
	90	select BACKLIGHT_CLASS_DEVICE if ACPI
	91	select INPUT if ACPI
	92	select ACPI_VIDEO if ACPI
79e53945	93	help
a1a5c3b9 KH	94	Choose this option if you want kernel modesetting enabled by default,
	95	and you have a new enough userspace to support this. Running old
	96	userspaces with this enabled will cause pain. Note that this causes
	97	the driver to bind to PCI devices, which precludes loading things
	98	like intelfb.
79e53945	99
a1a5c3b9	100	endchoice
79e53945	101
1da177e4 LT	102	config DRM_MGA
1da177e4 LT	103	tristate "Matrox g200/g400"
6795c985	104	depends on DRM
1da177e4 LT	105	help
	106	Choose this option if you have a Matrox G200, G400 or G450 graphics
	107	card. If M is selected, the module will be called mga. AGP
	108	support is required for this driver to work.
	109
	110	config DRM_SIS
	111	tristate "SiS video cards"
	112	depends on DRM && AGP
dfcf96d0	113	depends on FB_SIS \|\| FB_SIS=n
1da177e4	114	help
bc5f4523	115	Choose this option if you have a SiS 630 or compatible video
1da177e4 LT	116	chipset. If M is selected the module will be called sis. AGP
	117	support is required for this driver to work.
	118
22f579c6 DA	119	config DRM_VIA
	120	tristate "Via unichrome video cards"
	121	depends on DRM
	122	help
	123	Choose this option if you have a Via unichrome or compatible video
	124	chipset. If M is selected the module will be called via.
	125
282a1674 DA	126	config DRM_SAVAGE
	127	tristate "Savage video cards"
	128	depends on DRM
	129	help
	130	Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	131	chipset. If M is selected the module will be called savage.