[net-next-2.6.git] / drivers / gpu / drm / Kconfig

#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig DRM
	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
	depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
	select I2C
	select I2C_ALGOBIT
	help
	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
	  introduced in XFree86 4.0. If you say Y here, you need to select
	  the module that's right for your graphics card from the list below.
	  These modules provide support for synchronization, security, and
	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
	  details.  You should also select and configure AGP
	  (/dev/agpgart) support.

config DRM_KMS_HELPER
	tristate
	depends on DRM
	select FB
	select FRAMEBUFFER_CONSOLE if !EMBEDDED
	select SLOW_WORK
	help
	  FB and CRTC helpers for KMS drivers.

config DRM_TTM
	tristate
	depends on DRM
	help
	  GPU memory management subsystem for devices with multiple
	  GPU memory types. Will be enabled automatically if a device driver
	  uses it.

config DRM_TDFX
	tristate "3dfx Banshee/Voodoo3+"
	depends on DRM && PCI
	help
	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	  graphics card.  If M is selected, the module will be called tdfx.

config DRM_R128
	tristate "ATI Rage 128"
	depends on DRM && PCI
	select FW_LOADER
	help
	  Choose this option if you have an ATI Rage 128 graphics card.  If M
	  is selected, the module will be called r128.  AGP support for
	  this card is strongly suggested (unless you have a PCI version).

config DRM_RADEON
	tristate "ATI Radeon"
	depends on DRM && PCI
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	select FW_LOADER
        select DRM_KMS_HELPER
        select DRM_TTM
	help
	  Choose this option if you have an ATI Radeon graphics card.  There
	  are both PCI and AGP versions.  You don't need to choose this to
	  run the Radeon in plain VGA mode.

	  If M is selected, the module will be called radeon.

source "drivers/gpu/drm/radeon/Kconfig"

config DRM_I810
	tristate "Intel I810"
	depends on DRM && AGP && AGP_INTEL
	help
	  Choose this option if you have an Intel I810 graphics card.  If M is
	  selected, the module will be called i810.  AGP support is required
	  for this driver to work.

choice
	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
	depends on DRM && AGP && AGP_INTEL
	optional

config DRM_I830
	tristate "i830 driver"
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM or 865G integrated graphics.  If M is selected, the
	  module will be called i830.  AGP support is required for this driver
	  to work. This driver is used by the older X releases X.org 6.7 and
	  XFree86 4.3. If unsure, build this and i915 as modules and the X server
	  will load the correct one.

config DRM_I915
	tristate "i915 driver"
	depends on AGP_INTEL
	select SHMEM
	select DRM_KMS_HELPER
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	# i915 depends on ACPI_VIDEO when ACPI is enabled
	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	select VIDEO_OUTPUT_CONTROL if ACPI
	select BACKLIGHT_CLASS_DEVICE if ACPI
	select INPUT if ACPI
	select ACPI_VIDEO if ACPI
	select ACPI_BUTTON if ACPI
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
	  module will be called i915.  AGP support is required for this driver
	  to work. This driver is used by the Intel driver in X.org 6.8 and
	  XFree86 4.4 and above. If unsure, build this and i830 as modules and
	  the X server will load the correct one.

config DRM_I915_KMS
	bool "Enable modesetting on intel by default"
	depends on DRM_I915
	help
	  Choose this option if you want kernel modesetting enabled by default,
	  and you have a new enough userspace to support this. Running old
	  userspaces with this enabled will cause pain.  Note that this causes
	  the driver to bind to PCI devices, which precludes loading things
	  like intelfb.

endchoice

config DRM_MGA
	tristate "Matrox g200/g400"
	depends on DRM
	select FW_LOADER
	help
	  Choose this option if you have a Matrox G200, G400 or G450 graphics
	  card.  If M is selected, the module will be called mga.  AGP
	  support is required for this driver to work.

config DRM_SIS
	tristate "SiS video cards"
	depends on DRM && AGP
	depends on FB_SIS || FB_SIS=n
	help
	  Choose this option if you have a SiS 630 or compatible video
          chipset. If M is selected the module will be called sis. AGP
          support is required for this driver to work.

config DRM_VIA
	tristate "Via unichrome video cards"
	depends on DRM
	help
	  Choose this option if you have a Via unichrome or compatible video
	  chipset. If M is selected the module will be called via.

config DRM_SAVAGE
	tristate "Savage video cards"
	depends on DRM
	help
	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	  chipset. If M is selected the module will be called savage.
Commit	Line	Data
1da177e4 LT	1	#
	2	# Drm device configuration
	3	#
	4	# This driver provides support for the
	5	# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
	6	#
179b025f	7	menuconfig DRM
1da177e4	8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
e798ba57	9	depends on (AGP \|\| AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
57a6297e DA	10	select I2C
57a6297e DA	11	select I2C_ALGOBIT
1da177e4 LT	12	help
	13	Kernel-level support for the Direct Rendering Infrastructure (DRI)
	14	introduced in XFree86 4.0. If you say Y here, you need to select
	15	the module that's right for your graphics card from the list below.
	16	These modules provide support for synchronization, security, and
	17	DMA transfers. Please see <http://dri.sourceforge.net/> for more
	18	details. You should also select and configure AGP
	19	(/dev/agpgart) support.
	20
6fcefd56	21	config DRM_KMS_HELPER
13a8195b DA	22	tristate
	23	depends on DRM
	24	select FB
6fcefd56	25	select FRAMEBUFFER_CONSOLE if !EMBEDDED
5c4426a7	26	select SLOW_WORK
13a8195b	27	help
6fcefd56	28	FB and CRTC helpers for KMS drivers.
13a8195b	29
ba4e7d97	30	config DRM_TTM
771fe6b9	31	tristate
ba4e7d97 TH	32	depends on DRM
	33	help
	34	GPU memory management subsystem for devices with multiple
	35	GPU memory types. Will be enabled automatically if a device driver
	36	uses it.
	37
1da177e4 LT	38	config DRM_TDFX
	39	tristate "3dfx Banshee/Voodoo3+"
	40	depends on DRM && PCI
	41	help
	42	Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	43	graphics card. If M is selected, the module will be called tdfx.
	44
1da177e4 LT	45	config DRM_R128
	46	tristate "ATI Rage 128"
	47	depends on DRM && PCI
52f97df5	48	select FW_LOADER
1da177e4 LT	49	help
	50	Choose this option if you have an ATI Rage 128 graphics card. If M
	51	is selected, the module will be called r128. AGP support for
	52	this card is strongly suggested (unless you have a PCI version).
	53
	54	config DRM_RADEON
	55	tristate "ATI Radeon"
	56	depends on DRM && PCI
771fe6b9 JG	57	select FB_CFB_FILLRECT
	58	select FB_CFB_COPYAREA
	59	select FB_CFB_IMAGEBLIT
70967ab9	60	select FW_LOADER
a0cdc649 DA	61	select DRM_KMS_HELPER
a0cdc649 DA	62	select DRM_TTM
1da177e4 LT	63	help
	64	Choose this option if you have an ATI Radeon graphics card. There
	65	are both PCI and AGP versions. You don't need to choose this to
7b9af345	66	run the Radeon in plain VGA mode.
bc5f4523	67
1da177e4 LT	68	If M is selected, the module will be called radeon.
1da177e4 LT	69
f71d0187 DA	70	source "drivers/gpu/drm/radeon/Kconfig"
f71d0187 DA	71
1da177e4 LT	72	config DRM_I810
	73	tristate "Intel I810"
	74	depends on DRM && AGP && AGP_INTEL
	75	help
	76	Choose this option if you have an Intel I810 graphics card. If M is
	77	selected, the module will be called i810. AGP support is required
	78	for this driver to work.
	79
	80	choice
	81	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
	82	depends on DRM && AGP && AGP_INTEL
	83	optional
	84
	85	config DRM_I830
	86	tristate "i830 driver"
	87	help
	88	Choose this option if you have a system that has Intel 830M, 845G,
	89	852GM, 855GM or 865G integrated graphics. If M is selected, the
	90	module will be called i830. AGP support is required for this driver
d000b486 DA	91	to work. This driver is used by the older X releases X.org 6.7 and
	92	XFree86 4.3. If unsure, build this and i915 as modules and the X server
	93	will load the correct one.
1da177e4 LT	94
1da177e4 LT	95	config DRM_I915
31db5645	96	tristate "i915 driver"
8c52da50	97	depends on AGP_INTEL
ca9ab100	98	select SHMEM
6fcefd56	99	select DRM_KMS_HELPER
06d9f33c EA	100	select FB_CFB_FILLRECT
	101	select FB_CFB_COPYAREA
	102	select FB_CFB_IMAGEBLIT
31db5645 LB	103	# i915 depends on ACPI_VIDEO when ACPI is enabled
	104	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	105	select VIDEO_OUTPUT_CONTROL if ACPI
	106	select BACKLIGHT_CLASS_DEVICE if ACPI
	107	select INPUT if ACPI
	108	select ACPI_VIDEO if ACPI
c1c7af60	109	select ACPI_BUTTON if ACPI
1da177e4 LT	110	help
	111	Choose this option if you have a system that has Intel 830M, 845G,
	112	852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
	113	module will be called i915. AGP support is required for this driver
d000b486	114	to work. This driver is used by the Intel driver in X.org 6.8 and
bc5f4523	115	XFree86 4.4 and above. If unsure, build this and i830 as modules and
d000b486	116	the X server will load the correct one.
bc5f4523	117
79e53945 JB	118	config DRM_I915_KMS
	119	bool "Enable modesetting on intel by default"
	120	depends on DRM_I915
	121	help
a1a5c3b9 KH	122	Choose this option if you want kernel modesetting enabled by default,
	123	and you have a new enough userspace to support this. Running old
	124	userspaces with this enabled will cause pain. Note that this causes
	125	the driver to bind to PCI devices, which precludes loading things
	126	like intelfb.
79e53945	127
a1a5c3b9	128	endchoice
79e53945	129
1da177e4 LT	130	config DRM_MGA
1da177e4 LT	131	tristate "Matrox g200/g400"
6795c985	132	depends on DRM
ece2be79	133	select FW_LOADER
1da177e4 LT	134	help
	135	Choose this option if you have a Matrox G200, G400 or G450 graphics
	136	card. If M is selected, the module will be called mga. AGP
	137	support is required for this driver to work.
	138
	139	config DRM_SIS
	140	tristate "SiS video cards"
	141	depends on DRM && AGP
dfcf96d0	142	depends on FB_SIS \|\| FB_SIS=n
1da177e4	143	help
bc5f4523	144	Choose this option if you have a SiS 630 or compatible video
1da177e4 LT	145	chipset. If M is selected the module will be called sis. AGP
	146	support is required for this driver to work.
	147
22f579c6 DA	148	config DRM_VIA
	149	tristate "Via unichrome video cards"
	150	depends on DRM
	151	help
	152	Choose this option if you have a Via unichrome or compatible video
	153	chipset. If M is selected the module will be called via.
	154
282a1674 DA	155	config DRM_SAVAGE
	156	tristate "Savage video cards"
	157	depends on DRM
	158	help
	159	Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	160	chipset. If M is selected the module will be called savage.