[net-next-2.6.git] / drivers / gpio / Kconfig

#
# GPIO infrastructure and expanders
#

config ARCH_WANT_OPTIONAL_GPIOLIB
	bool
	help
	  Select this config option from the architecture Kconfig, if
	  it is possible to use gpiolib on the architecture, but let the
	  user decide whether to actually build it or not.
	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
	  not depend on GPIOs being available, but rather let the user
	  decide whether he needs it or not.

config ARCH_REQUIRE_GPIOLIB
	bool
	select GPIOLIB
	help
	  Platforms select gpiolib if they use this infrastructure
	  for all their GPIOs, usually starting with ones integrated
	  into SOC processors.
	  Selecting this from the architecture code will cause the gpiolib
	  code to always get built in.


menuconfig GPIOLIB
	bool "GPIO Support"
	depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
	select GENERIC_GPIO
	help
	  This enables GPIO support through the generic GPIO library.
	  You only need to enable this, if you also want to enable
	  one or more of the GPIO expansion card drivers below.

	  If unsure, say N.

if GPIOLIB

config DEBUG_GPIO
	bool "Debug GPIO calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to GPIO calls.
	  These checks help ensure that GPIOs have been properly initialized
	  before they are used, and that sleeping calls are not made from
	  non-sleeping contexts.  They can make bitbanged serial protocols
	  slower.  The diagnostics help catch the type of setup errors
	  that are most common when setting up new platforms or boards.

config GPIO_SYSFS
	bool "/sys/class/gpio/... (sysfs interface)"
	depends on SYSFS && EXPERIMENTAL
	help
	  Say Y here to add a sysfs interface for GPIOs.

	  This is mostly useful to work around omissions in a system's
	  kernel support.  Those are common in custom and semicustom
	  hardware assembled using standard kernels with a minimum of
	  custom patches.  In those cases, userspace code may import
	  a given GPIO from the kernel, if no kernel driver requested it.

	  Kernel drivers may also request that a particular GPIO be
	  exported to userspace; this can be useful when debugging.

# put expanders in the right section, in alphabetical order

comment "Memory mapped GPIO expanders:"

config GPIO_PL061
	bool "PrimeCell PL061 GPIO support"
	depends on ARM_AMBA
	help
	  Say yes here to support the PrimeCell PL061 GPIO device

config GPIO_XILINX
	bool "Xilinx GPIO support"
	depends on PPC_OF || MICROBLAZE
	help
	  Say yes here to support the Xilinx FPGA GPIO device

config GPIO_VR41XX
	tristate "NEC VR4100 series General-purpose I/O Uint support"
	depends on CPU_VR41XX
	help
	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint

comment "I2C GPIO expanders:"

config GPIO_MAX732X
	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	depends on I2C
	help
	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	  Port Expanders. Each IO port on these chips has a fixed role of
	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	  Input and Output (designed by 'P'). The combinations are listed
	  below:

	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
		  	max7322 (4I4O), max7323 (4P4O)

	  16 bits:	max7324 (8I8O), max7325 (8P8O),
		  	max7326 (4I12O), max7327 (4P12O)

	  Board setup code must specify the model to use, and the start
	  number for these GPIOs.

config GPIO_PCA953X
	tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
	depends on I2C
	help
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

	  8 bits:	max7310, pca9534, pca9538, pca9554, pca9557,
	  		tca6408

	  16 bits:	pca9535, pca9539, pca9555, tca6416

	  This driver can also be built as a module.  If so, the module
	  will be called pca953x.

config GPIO_PCF857X
	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
	depends on I2C
	help
	  Say yes here to provide access to most "quasi-bidirectional" I2C
	  GPIO expanders used for additional digital outputs or inputs.
	  Most of these parts are from NXP, though TI is a second source for
	  some of them.  Compatible models include:

	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
	            pca9670, pca9672, pca9674, pca9674a,
	  	    max7328, max7329

	  16 bits:  pcf8575, pcf8575c, pca8575,
	            pca9671, pca9673, pca9675

	  Your board setup code will need to declare the expanders in
	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
	  can then be used from drivers and other kernel code, just like
	  other GPIOs, but only accessible from task contexts.

	  This driver provides an in-kernel interface to those GPIOs using
	  platform-neutral GPIO calls.

config GPIO_TWL4030
	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
	depends on TWL4030_CORE
	help
	  Say yes here to access the GPIO signals of various multi-function
	  power management chips from Texas Instruments.

config GPIO_WM831X
	tristate "WM831x GPIOs"
	depends on MFD_WM831X
	help
	  Say yes here to access the GPIO signals of WM831x power management
	  chips from Wolfson Microelectronics.

config GPIO_ADP5520
	tristate "GPIO Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip GPIO found
	  on Analog Devices ADP5520 PMICs.

	  To compile this driver as a module, choose M here: the module will
	  be called adp5520-gpio.

comment "PCI GPIO expanders:"

config GPIO_CS5535
	tristate "AMD CS5535/CS5536 GPIO support"
	depends on PCI && !CS5535_GPIO && !MGEODE_LX
	help
	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	  can be used for quite a number of things.  The CS5535/6 is found on
	  AMD Geode and Lemote Yeeloong devices.

	  If unsure, say N.

config GPIO_BT8XX
	tristate "BT8XX GPIO abuser"
	depends on PCI && VIDEO_BT848=n
	help
	  The BT8xx frame grabber chip has 24 GPIO pins than can be abused
	  as a cheap PCI GPIO card.

	  This chip can be found on Miro, Hauppauge and STB TV-cards.

	  The card needs to be physically altered for using it as a
	  GPIO card. For more information on how to build a GPIO card
	  from a BT8xx TV card, see the documentation file at
	  Documentation/bt8xxgpio.txt

	  If unsure, say N.

config GPIO_LANGWELL
	bool "Intel Moorestown Platform Langwell GPIO support"
	depends on PCI
	help
	  Say Y here to support Intel Moorestown platform GPIO.

comment "SPI GPIO expanders:"

config GPIO_MAX7301
	tristate "Maxim MAX7301 GPIO expander"
	depends on SPI_MASTER
	help
	  gpio driver for Maxim MAX7301 SPI GPIO expander.

config GPIO_MCP23S08
	tristate "Microchip MCP23S08 I/O expander"
	depends on SPI_MASTER
	help
	  SPI driver for Microchip MCP23S08 I/O expander.  This provides
	  a GPIO interface supporting inputs and outputs.

config GPIO_MC33880
	tristate "Freescale MC33880 high-side/low-side switch"
	depends on SPI_MASTER
	help
	  SPI driver for Freescale MC33880 high-side/low-side switch.
	  This provides GPIO interface supporting inputs and outputs.

comment "AC97 GPIO expanders:"

config GPIO_UCB1400
	bool "Philips UCB1400 GPIO"
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 GPIO pins.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_gpio.

endif
Commit	Line	Data
a9c5fff5 DB	1	#
	2	# GPIO infrastructure and expanders
	3	#
	4
7444a72e	5	config ARCH_WANT_OPTIONAL_GPIOLIB
a9c5fff5	6	bool
7444a72e MB	7	help
	8	Select this config option from the architecture Kconfig, if
	9	it is possible to use gpiolib on the architecture, but let the
	10	user decide whether to actually build it or not.
	11	Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
	12	not depend on GPIOs being available, but rather let the user
	13	decide whether he needs it or not.
	14
	15	config ARCH_REQUIRE_GPIOLIB
	16	bool
	17	select GPIOLIB
a9c5fff5 DB	18	help
	19	Platforms select gpiolib if they use this infrastructure
	20	for all their GPIOs, usually starting with ones integrated
	21	into SOC processors.
7444a72e MB	22	Selecting this from the architecture code will cause the gpiolib
	23	code to always get built in.
	24
	25
	26
	27	menuconfig GPIOLIB
	28	bool "GPIO Support"
	29	depends on ARCH_WANT_OPTIONAL_GPIOLIB \|\| ARCH_REQUIRE_GPIOLIB
	30	select GENERIC_GPIO
	31	help
	32	This enables GPIO support through the generic GPIO library.
	33	You only need to enable this, if you also want to enable
	34	one or more of the GPIO expansion card drivers below.
	35
	36	If unsure, say N.
a9c5fff5	37
7444a72e	38	if GPIOLIB
a9c5fff5 DB	39
	40	config DEBUG_GPIO
	41	bool "Debug GPIO calls"
	42	depends on DEBUG_KERNEL
	43	help
	44	Say Y here to add some extra checks and diagnostics to GPIO calls.
692105b8 ML	45	These checks help ensure that GPIOs have been properly initialized
	46	before they are used, and that sleeping calls are not made from
	47	non-sleeping contexts. They can make bitbanged serial protocols
a9c5fff5 DB	48	slower. The diagnostics help catch the type of setup errors
	49	that are most common when setting up new platforms or boards.
	50
d8f388d8 DB	51	config GPIO_SYSFS
	52	bool "/sys/class/gpio/... (sysfs interface)"
	53	depends on SYSFS && EXPERIMENTAL
	54	help
	55	Say Y here to add a sysfs interface for GPIOs.
	56
	57	This is mostly useful to work around omissions in a system's
	58	kernel support. Those are common in custom and semicustom
	59	hardware assembled using standard kernels with a minimum of
	60	custom patches. In those cases, userspace code may import
	61	a given GPIO from the kernel, if no kernel driver requested it.
	62
	63	Kernel drivers may also request that a particular GPIO be
	64	exported to userspace; this can be useful when debugging.
	65
a9c5fff5 DB	66	# put expanders in the right section, in alphabetical order
a9c5fff5 DB	67
0bcb6069 JL	68	comment "Memory mapped GPIO expanders:"
0bcb6069 JL	69
1e9c2859 BS	70	config GPIO_PL061
	71	bool "PrimeCell PL061 GPIO support"
	72	depends on ARM_AMBA
	73	help
	74	Say yes here to support the PrimeCell PL061 GPIO device
	75
0bcb6069 JL	76	config GPIO_XILINX
0bcb6069 JL	77	bool "Xilinx GPIO support"
6fa612b5	78	depends on PPC_OF \|\| MICROBLAZE
0bcb6069 JL	79	help
	80	Say yes here to support the Xilinx FPGA GPIO device
	81
27fdd325 YY	82	config GPIO_VR41XX
	83	tristate "NEC VR4100 series General-purpose I/O Uint support"
	84	depends on CPU_VR41XX
	85	help
	86	Say yes here to support the NEC VR4100 series General-purpose I/O Uint
	87
a9c5fff5 DB	88	comment "I2C GPIO expanders:"
a9c5fff5 DB	89
bbcd6d54 EM	90	config GPIO_MAX732X
	91	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	92	depends on I2C
	93	help
	94	Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	95	Port Expanders. Each IO port on these chips has a fixed role of
	96	Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	97	Input and Output (designed by 'P'). The combinations are listed
	98	below:
	99
	100	8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
	101	max7322 (4I4O), max7323 (4P4O)
	102
	103	16 bits: max7324 (8I8O), max7325 (8P8O),
	104	max7326 (4I12O), max7327 (4P12O)
	105
	106	Board setup code must specify the model to use, and the start
	107	number for these GPIOs.
	108
f3dc3630	109	config GPIO_PCA953X
ab5dc372	110	tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
9e60fdcf	111	depends on I2C
9e60fdcf	112	help
7059d4b0 DB	113	Say yes here to provide access to several register-oriented
	114	SMBus I/O expanders, made mostly by NXP or TI. Compatible
	115	models include:
	116
	117	4 bits: pca9536, pca9537
	118
ab5dc372 DB	119	8 bits: max7310, pca9534, pca9538, pca9554, pca9557,
ab5dc372 DB	120	tca6408
7059d4b0	121
ab5dc372	122	16 bits: pca9535, pca9539, pca9555, tca6416
9e60fdcf	123
9e60fdcf	124	This driver can also be built as a module. If so, the module
f3dc3630	125	will be called pca953x.
9e60fdcf	126
15fae37d	127	config GPIO_PCF857X
1673ad52	128	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
15fae37d DB	129	depends on I2C
	130	help
	131	Say yes here to provide access to most "quasi-bidirectional" I2C
	132	GPIO expanders used for additional digital outputs or inputs.
	133	Most of these parts are from NXP, though TI is a second source for
	134	some of them. Compatible models include:
	135
	136	8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
1673ad52 DB	137	pca9670, pca9672, pca9674, pca9674a,
1673ad52 DB	138	max7328, max7329
15fae37d DB	139
	140	16 bits: pcf8575, pcf8575c, pca8575,
	141	pca9671, pca9673, pca9675
	142
	143	Your board setup code will need to declare the expanders in
	144	use, and assign numbers to the GPIOs they expose. Those GPIOs
	145	can then be used from drivers and other kernel code, just like
	146	other GPIOs, but only accessible from task contexts.
	147
	148	This driver provides an in-kernel interface to those GPIOs using
	149	platform-neutral GPIO calls.
	150
e9d35947 DB	151	config GPIO_TWL4030
	152	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
	153	depends on TWL4030_CORE
	154	help
	155	Say yes here to access the GPIO signals of various multi-function
	156	power management chips from Texas Instruments.
	157
e4b736f1 MB	158	config GPIO_WM831X
	159	tristate "WM831x GPIOs"
	160	depends on MFD_WM831X
	161	help
	162	Say yes here to access the GPIO signals of WM831x power management
	163	chips from Wolfson Microelectronics.
	164
ef72af40 MH	165	config GPIO_ADP5520
	166	tristate "GPIO Support for ADP5520 PMIC"
	167	depends on PMIC_ADP5520
	168	help
	169	This option enables support for on-chip GPIO found
	170	on Analog Devices ADP5520 PMICs.
	171
	172	To compile this driver as a module, choose M here: the module will
	173	be called adp5520-gpio.
	174
ff1d5c2f MB	175	comment "PCI GPIO expanders:"
ff1d5c2f MB	176
5f0a96b0 AS	177	config GPIO_CS5535
	178	tristate "AMD CS5535/CS5536 GPIO support"
	179	depends on PCI && !CS5535_GPIO && !MGEODE_LX
	180	help
	181	The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	182	can be used for quite a number of things. The CS5535/6 is found on
	183	AMD Geode and Lemote Yeeloong devices.
	184
	185	If unsure, say N.
	186
ff1d5c2f MB	187	config GPIO_BT8XX
	188	tristate "BT8XX GPIO abuser"
	189	depends on PCI && VIDEO_BT848=n
	190	help
	191	The BT8xx frame grabber chip has 24 GPIO pins than can be abused
	192	as a cheap PCI GPIO card.
	193
	194	This chip can be found on Miro, Hauppauge and STB TV-cards.
	195
	196	The card needs to be physically altered for using it as a
	197	GPIO card. For more information on how to build a GPIO card
	198	from a BT8xx TV card, see the documentation file at
	199	Documentation/bt8xxgpio.txt
	200
	201	If unsure, say N.
	202
8bf02617 AD	203	config GPIO_LANGWELL
	204	bool "Intel Moorestown Platform Langwell GPIO support"
	205	depends on PCI
	206	help
	207	Say Y here to support Intel Moorestown platform GPIO.
	208
a9c5fff5 DB	209	comment "SPI GPIO expanders:"
a9c5fff5 DB	210
0c36ec31 JB	211	config GPIO_MAX7301
	212	tristate "Maxim MAX7301 GPIO expander"
	213	depends on SPI_MASTER
	214	help
	215	gpio driver for Maxim MAX7301 SPI GPIO expander.
	216
e58b9e27 DB	217	config GPIO_MCP23S08
	218	tristate "Microchip MCP23S08 I/O expander"
	219	depends on SPI_MASTER
	220	help
	221	SPI driver for Microchip MCP23S08 I/O expander. This provides
	222	a GPIO interface supporting inputs and outputs.
	223
1e5db006 RR	224	config GPIO_MC33880
	225	tristate "Freescale MC33880 high-side/low-side switch"
	226	depends on SPI_MASTER
	227	help
	228	SPI driver for Freescale MC33880 high-side/low-side switch.
	229	This provides GPIO interface supporting inputs and outputs.
	230
4cf8e53b MV	231	comment "AC97 GPIO expanders:"
	232
	233	config GPIO_UCB1400
	234	bool "Philips UCB1400 GPIO"
	235	depends on UCB1400_CORE
	236	help
	237	This enables support for the Philips UCB1400 GPIO pins.
	238	The UCB1400 is an AC97 audio codec.
	239
	240	To compile this driver as a module, choose M here: the
	241	module will be called ucb1400_gpio.
	242
7444a72e	243	endif