]>
Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
926b1e2c | 2 | # platform-neutral GPIO infrastructure and expanders |
a9c5fff5 DB |
3 | # |
4 | ||
7444a72e | 5 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 6 | bool |
7444a72e MB |
7 | help |
8 | Select this config option from the architecture Kconfig, if | |
9 | it is possible to use gpiolib on the architecture, but let the | |
10 | user decide whether to actually build it or not. | |
11 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
12 | not depend on GPIOs being available, but rather let the user | |
13 | decide whether he needs it or not. | |
14 | ||
15 | config ARCH_REQUIRE_GPIOLIB | |
16 | bool | |
17 | select GPIOLIB | |
a9c5fff5 DB |
18 | help |
19 | Platforms select gpiolib if they use this infrastructure | |
20 | for all their GPIOs, usually starting with ones integrated | |
21 | into SOC processors. | |
7444a72e MB |
22 | Selecting this from the architecture code will cause the gpiolib |
23 | code to always get built in. | |
24 | ||
25 | ||
26 | ||
27 | menuconfig GPIOLIB | |
28 | bool "GPIO Support" | |
29 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
30 | select GENERIC_GPIO | |
31 | help | |
32 | This enables GPIO support through the generic GPIO library. | |
33 | You only need to enable this, if you also want to enable | |
34 | one or more of the GPIO expansion card drivers below. | |
35 | ||
36 | If unsure, say N. | |
a9c5fff5 | 37 | |
7444a72e | 38 | if GPIOLIB |
a9c5fff5 DB |
39 | |
40 | config DEBUG_GPIO | |
41 | bool "Debug GPIO calls" | |
42 | depends on DEBUG_KERNEL | |
43 | help | |
44 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
45 | These checks help ensure that GPIOs have been properly initialized |
46 | before they are used, and that sleeping calls are not made from | |
47 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
48 | slower. The diagnostics help catch the type of setup errors |
49 | that are most common when setting up new platforms or boards. | |
50 | ||
d8f388d8 DB |
51 | config GPIO_SYSFS |
52 | bool "/sys/class/gpio/... (sysfs interface)" | |
53 | depends on SYSFS && EXPERIMENTAL | |
54 | help | |
55 | Say Y here to add a sysfs interface for GPIOs. | |
56 | ||
57 | This is mostly useful to work around omissions in a system's | |
58 | kernel support. Those are common in custom and semicustom | |
59 | hardware assembled using standard kernels with a minimum of | |
60 | custom patches. In those cases, userspace code may import | |
61 | a given GPIO from the kernel, if no kernel driver requested it. | |
62 | ||
63 | Kernel drivers may also request that a particular GPIO be | |
64 | exported to userspace; this can be useful when debugging. | |
65 | ||
a9c5fff5 DB |
66 | # put expanders in the right section, in alphabetical order |
67 | ||
e952805d WS |
68 | config GPIO_MAX730X |
69 | tristate | |
70 | ||
0bcb6069 JL |
71 | comment "Memory mapped GPIO expanders:" |
72 | ||
9cc0cb3c DT |
73 | config GPIO_IT8761E |
74 | tristate "IT8761E GPIO support" | |
75 | depends on GPIOLIB | |
76 | help | |
77 | Say yes here to support GPIO functionality of IT8761E super I/O chip. | |
78 | ||
1e9c2859 BS |
79 | config GPIO_PL061 |
80 | bool "PrimeCell PL061 GPIO support" | |
81 | depends on ARM_AMBA | |
82 | help | |
83 | Say yes here to support the PrimeCell PL061 GPIO device | |
84 | ||
0bcb6069 JL |
85 | config GPIO_XILINX |
86 | bool "Xilinx GPIO support" | |
6fa612b5 | 87 | depends on PPC_OF || MICROBLAZE |
0bcb6069 JL |
88 | help |
89 | Say yes here to support the Xilinx FPGA GPIO device | |
90 | ||
27fdd325 YY |
91 | config GPIO_VR41XX |
92 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
93 | depends on CPU_VR41XX | |
94 | help | |
95 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
96 | ||
be9b06b2 DT |
97 | config GPIO_SCH |
98 | tristate "Intel SCH GPIO" | |
860fb8c1 RD |
99 | depends on GPIOLIB && PCI |
100 | select MFD_CORE | |
be9b06b2 DT |
101 | select LPC_SCH |
102 | help | |
103 | Say yes here to support GPIO interface on Intel Poulsbo SCH. | |
104 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | |
105 | powered by the core power rail and are turned off during sleep | |
106 | modes (S3 and higher). The remaining four GPIOs are powered by | |
107 | the Intel SCH suspend power supply. These GPIOs remain | |
108 | active during S3. The suspend powered GPIOs can be used to wake the | |
109 | system from the Suspend-to-RAM state. | |
110 | ||
111 | This driver can also be built as a module. If so, the module | |
112 | will be called sch-gpio. | |
113 | ||
a9c5fff5 DB |
114 | comment "I2C GPIO expanders:" |
115 | ||
e952805d WS |
116 | config GPIO_MAX7300 |
117 | tristate "Maxim MAX7300 GPIO expander" | |
118 | depends on I2C | |
119 | select GPIO_MAX730X | |
120 | help | |
121 | GPIO driver for Maxim MAX7301 I2C-based GPIO expander. | |
122 | ||
bbcd6d54 EM |
123 | config GPIO_MAX732X |
124 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
125 | depends on I2C | |
126 | help | |
127 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
128 | Port Expanders. Each IO port on these chips has a fixed role of | |
129 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
130 | Input and Output (designed by 'P'). The combinations are listed | |
131 | below: | |
132 | ||
133 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
134 | max7322 (4I4O), max7323 (4P4O) | |
135 | ||
136 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
137 | max7326 (4I12O), max7327 (4P12O) | |
138 | ||
139 | Board setup code must specify the model to use, and the start | |
140 | number for these GPIOs. | |
141 | ||
a80a0bbe MZ |
142 | config GPIO_MAX732X_IRQ |
143 | bool "Interrupt controller support for MAX732x" | |
144 | depends on GPIO_MAX732X=y && GENERIC_HARDIRQS | |
145 | help | |
146 | Say yes here to enable the max732x to be used as an interrupt | |
147 | controller. It requires the driver to be built in the kernel. | |
148 | ||
f3dc3630 | 149 | config GPIO_PCA953X |
ab5dc372 | 150 | tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 151 | depends on I2C |
152 | help | |
7059d4b0 DB |
153 | Say yes here to provide access to several register-oriented |
154 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
155 | models include: | |
156 | ||
157 | 4 bits: pca9536, pca9537 | |
158 | ||
ab5dc372 DB |
159 | 8 bits: max7310, pca9534, pca9538, pca9554, pca9557, |
160 | tca6408 | |
7059d4b0 | 161 | |
ab5dc372 | 162 | 16 bits: pca9535, pca9539, pca9555, tca6416 |
9e60fdcf | 163 | |
164 | This driver can also be built as a module. If so, the module | |
f3dc3630 | 165 | will be called pca953x. |
9e60fdcf | 166 | |
89ea8bbe MZ |
167 | config GPIO_PCA953X_IRQ |
168 | bool "Interrupt controller support for PCA953x" | |
169 | depends on GPIO_PCA953X=y | |
170 | help | |
171 | Say yes here to enable the pca953x to be used as an interrupt | |
172 | controller. It requires the driver to be built in the kernel. | |
173 | ||
15fae37d | 174 | config GPIO_PCF857X |
1673ad52 | 175 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
15fae37d DB |
176 | depends on I2C |
177 | help | |
178 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
179 | GPIO expanders used for additional digital outputs or inputs. | |
180 | Most of these parts are from NXP, though TI is a second source for | |
181 | some of them. Compatible models include: | |
182 | ||
183 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
184 | pca9670, pca9672, pca9674, pca9674a, |
185 | max7328, max7329 | |
15fae37d DB |
186 | |
187 | 16 bits: pcf8575, pcf8575c, pca8575, | |
188 | pca9671, pca9673, pca9675 | |
189 | ||
190 | Your board setup code will need to declare the expanders in | |
191 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
192 | can then be used from drivers and other kernel code, just like | |
193 | other GPIOs, but only accessible from task contexts. | |
194 | ||
195 | This driver provides an in-kernel interface to those GPIOs using | |
196 | platform-neutral GPIO calls. | |
197 | ||
d88b25be RV |
198 | config GPIO_TC35892 |
199 | bool "TC35892 GPIOs" | |
200 | depends on MFD_TC35892 | |
201 | help | |
202 | This enables support for the GPIOs found on the TC35892 | |
203 | I/O Expander. | |
204 | ||
e9d35947 DB |
205 | config GPIO_TWL4030 |
206 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
207 | depends on TWL4030_CORE | |
208 | help | |
209 | Say yes here to access the GPIO signals of various multi-function | |
210 | power management chips from Texas Instruments. | |
211 | ||
e4b736f1 MB |
212 | config GPIO_WM831X |
213 | tristate "WM831x GPIOs" | |
214 | depends on MFD_WM831X | |
215 | help | |
216 | Say yes here to access the GPIO signals of WM831x power management | |
217 | chips from Wolfson Microelectronics. | |
218 | ||
38f6ce45 MB |
219 | config GPIO_WM8350 |
220 | tristate "WM8350 GPIOs" | |
221 | depends on MFD_WM8350 | |
222 | help | |
223 | Say yes here to access the GPIO signals of WM8350 power management | |
224 | chips from Wolfson Microelectronics. | |
225 | ||
2955c309 MB |
226 | config GPIO_WM8994 |
227 | tristate "WM8994 GPIOs" | |
228 | depends on MFD_WM8994 | |
229 | help | |
230 | Say yes here to access the GPIO signals of WM8994 audio hub | |
231 | CODECs from Wolfson Microelectronics. | |
232 | ||
ef72af40 MH |
233 | config GPIO_ADP5520 |
234 | tristate "GPIO Support for ADP5520 PMIC" | |
235 | depends on PMIC_ADP5520 | |
236 | help | |
237 | This option enables support for on-chip GPIO found | |
238 | on Analog Devices ADP5520 PMICs. | |
239 | ||
240 | To compile this driver as a module, choose M here: the module will | |
241 | be called adp5520-gpio. | |
242 | ||
80884094 MH |
243 | config GPIO_ADP5588 |
244 | tristate "ADP5588 I2C GPIO expander" | |
245 | depends on I2C | |
246 | help | |
247 | This option enables support for 18 GPIOs found | |
248 | on Analog Devices ADP5588 GPIO Expanders. | |
249 | To compile this driver as a module, choose M here: the module will be | |
250 | called adp5588-gpio. | |
251 | ||
ff1d5c2f MB |
252 | comment "PCI GPIO expanders:" |
253 | ||
5f0a96b0 AS |
254 | config GPIO_CS5535 |
255 | tristate "AMD CS5535/CS5536 GPIO support" | |
c95d1e53 | 256 | depends on PCI && !CS5535_GPIO |
5f0a96b0 AS |
257 | help |
258 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
259 | can be used for quite a number of things. The CS5535/6 is found on | |
260 | AMD Geode and Lemote Yeeloong devices. | |
261 | ||
262 | If unsure, say N. | |
263 | ||
ff1d5c2f MB |
264 | config GPIO_BT8XX |
265 | tristate "BT8XX GPIO abuser" | |
266 | depends on PCI && VIDEO_BT848=n | |
267 | help | |
268 | The BT8xx frame grabber chip has 24 GPIO pins than can be abused | |
269 | as a cheap PCI GPIO card. | |
270 | ||
271 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
272 | ||
273 | The card needs to be physically altered for using it as a | |
274 | GPIO card. For more information on how to build a GPIO card | |
275 | from a BT8xx TV card, see the documentation file at | |
276 | Documentation/bt8xxgpio.txt | |
277 | ||
278 | If unsure, say N. | |
279 | ||
8bf02617 | 280 | config GPIO_LANGWELL |
8081c84c | 281 | bool "Intel Langwell/Penwell GPIO support" |
8bf02617 AD |
282 | depends on PCI |
283 | help | |
8081c84c | 284 | Say Y here to support Intel Langwell/Penwell GPIO. |
8bf02617 | 285 | |
35570ac6 RR |
286 | config GPIO_TIMBERDALE |
287 | bool "Support for timberdale GPIO IP" | |
288 | depends on MFD_TIMBERDALE && GPIOLIB && HAS_IOMEM | |
289 | ---help--- | |
290 | Add support for the GPIO IP in the timberdale FPGA. | |
291 | ||
9956d02d FF |
292 | config GPIO_RDC321X |
293 | tristate "RDC R-321x GPIO support" | |
294 | depends on PCI && GPIOLIB | |
e4be3cb7 | 295 | select MFD_CORE |
9956d02d FF |
296 | select MFD_RDC321X |
297 | help | |
298 | Support for the RDC R321x SoC GPIOs over southbridge | |
299 | PCI configuration space. | |
300 | ||
a9c5fff5 DB |
301 | comment "SPI GPIO expanders:" |
302 | ||
0c36ec31 JB |
303 | config GPIO_MAX7301 |
304 | tristate "Maxim MAX7301 GPIO expander" | |
305 | depends on SPI_MASTER | |
e952805d | 306 | select GPIO_MAX730X |
0c36ec31 | 307 | help |
e952805d | 308 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 309 | |
e58b9e27 DB |
310 | config GPIO_MCP23S08 |
311 | tristate "Microchip MCP23S08 I/O expander" | |
312 | depends on SPI_MASTER | |
313 | help | |
314 | SPI driver for Microchip MCP23S08 I/O expander. This provides | |
315 | a GPIO interface supporting inputs and outputs. | |
316 | ||
1e5db006 RR |
317 | config GPIO_MC33880 |
318 | tristate "Freescale MC33880 high-side/low-side switch" | |
319 | depends on SPI_MASTER | |
320 | help | |
321 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
322 | This provides GPIO interface supporting inputs and outputs. | |
323 | ||
4cf8e53b MV |
324 | comment "AC97 GPIO expanders:" |
325 | ||
326 | config GPIO_UCB1400 | |
327 | bool "Philips UCB1400 GPIO" | |
328 | depends on UCB1400_CORE | |
329 | help | |
330 | This enables support for the Philips UCB1400 GPIO pins. | |
331 | The UCB1400 is an AC97 audio codec. | |
332 | ||
333 | To compile this driver as a module, choose M here: the | |
334 | module will be called ucb1400_gpio. | |
335 | ||
800e69fb IS |
336 | comment "MODULbus GPIO expanders:" |
337 | ||
338 | config GPIO_JANZ_TTL | |
339 | tristate "Janz VMOD-TTL Digital IO Module" | |
340 | depends on MFD_JANZ_CMODIO | |
341 | help | |
342 | This enables support for the Janz VMOD-TTL Digital IO module. | |
343 | This driver provides support for driving the pins in output | |
344 | mode only. Input mode is not supported. | |
345 | ||
7444a72e | 346 | endif |