[net-next-2.6.git] / drivers / edac / i82875p_edac.c

/*
 * Intel D82875P Memory Controller kernel module
 * (C) 2003 Linux Networx (http://lnxi.com)
 * This file may be distributed under the terms of the
 * GNU General Public License.
 *
 * Written by Thayne Harbaugh
 * Contributors:
 *	Wang Zhenyu at intel.com
 *
 * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
 *
 * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/edac.h>
#include "edac_core.h"

#define I82875P_REVISION	" Ver: 2.0.2 " __DATE__
#define EDAC_MOD_STR		"i82875p_edac"

#define i82875p_printk(level, fmt, arg...) \
	edac_printk(level, "i82875p", fmt, ##arg)

#define i82875p_mc_printk(mci, level, fmt, arg...) \
	edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)

#ifndef PCI_DEVICE_ID_INTEL_82875_0
#define PCI_DEVICE_ID_INTEL_82875_0	0x2578
#endif				/* PCI_DEVICE_ID_INTEL_82875_0 */

#ifndef PCI_DEVICE_ID_INTEL_82875_6
#define PCI_DEVICE_ID_INTEL_82875_6	0x257e
#endif				/* PCI_DEVICE_ID_INTEL_82875_6 */

/* four csrows in dual channel, eight in single channel */
#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans))

/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
#define I82875P_EAP		0x58	/* Error Address Pointer (32b)
					 *
					 * 31:12 block address
					 * 11:0  reserved
					 */

#define I82875P_DERRSYN		0x5c	/* DRAM Error Syndrome (8b)
					 *
					 *  7:0  DRAM ECC Syndrome
					 */

#define I82875P_DES		0x5d	/* DRAM Error Status (8b)
					 *
					 *  7:1  reserved
					 *  0    Error channel 0/1
					 */

#define I82875P_ERRSTS		0xc8	/* Error Status Register (16b)
					 *
					 * 15:10 reserved
					 *  9    non-DRAM lock error (ndlock)
					 *  8    Sftwr Generated SMI
					 *  7    ECC UE
					 *  6    reserved
					 *  5    MCH detects unimplemented cycle
					 *  4    AGP access outside GA
					 *  3    Invalid AGP access
					 *  2    Invalid GA translation table
					 *  1    Unsupported AGP command
					 *  0    ECC CE
					 */

#define I82875P_ERRCMD		0xca	/* Error Command (16b)
					 *
					 * 15:10 reserved
					 *  9    SERR on non-DRAM lock
					 *  8    SERR on ECC UE
					 *  7    SERR on ECC CE
					 *  6    target abort on high exception
					 *  5    detect unimplemented cyc
					 *  4    AGP access outside of GA
					 *  3    SERR on invalid AGP access
					 *  2    invalid translation table
					 *  1    SERR on unsupported AGP command
					 *  0    reserved
					 */

/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
#define I82875P_PCICMD6		0x04	/* PCI Command Register (16b)
					 *
					 * 15:10 reserved
					 *  9    fast back-to-back - ro 0
					 *  8    SERR enable - ro 0
					 *  7    addr/data stepping - ro 0
					 *  6    parity err enable - ro 0
					 *  5    VGA palette snoop - ro 0
					 *  4    mem wr & invalidate - ro 0
					 *  3    special cycle - ro 0
					 *  2    bus master - ro 0
					 *  1    mem access dev6 - 0(dis),1(en)
					 *  0    IO access dev3 - 0(dis),1(en)
					 */

#define I82875P_BAR6		0x10	/* Mem Delays Base ADDR Reg (32b)
					 *
					 * 31:12 mem base addr [31:12]
					 * 11:4  address mask - ro 0
					 *  3    prefetchable - ro 0(non),1(pre)
					 *  2:1  mem type - ro 0
					 *  0    mem space - ro 0
					 */

/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */

#define I82875P_DRB_SHIFT 26	/* 64MiB grain */
#define I82875P_DRB		0x00	/* DRAM Row Boundary (8b x 8)
					 *
					 *  7    reserved
					 *  6:0  64MiB row boundary addr
					 */

#define I82875P_DRA		0x10	/* DRAM Row Attribute (4b x 8)
					 *
					 *  7    reserved
					 *  6:4  row attr row 1
					 *  3    reserved
					 *  2:0  row attr row 0
					 *
					 * 000 =  4KiB
					 * 001 =  8KiB
					 * 010 = 16KiB
					 * 011 = 32KiB
					 */

#define I82875P_DRC		0x68	/* DRAM Controller Mode (32b)
					 *
					 * 31:30 reserved
					 * 29    init complete
					 * 28:23 reserved
					 * 22:21 nr chan 00=1,01=2
					 * 20    reserved
					 * 19:18 Data Integ Mode 00=none,01=ecc
					 * 17:11 reserved
					 * 10:8  refresh mode
					 *  7    reserved
					 *  6:4  mode select
					 *  3:2  reserved
					 *  1:0  DRAM type 01=DDR
					 */

enum i82875p_chips {
	I82875P = 0,
};

struct i82875p_pvt {
	struct pci_dev *ovrfl_pdev;
	void __iomem *ovrfl_window;
};

struct i82875p_dev_info {
	const char *ctl_name;
};

struct i82875p_error_info {
	u16 errsts;
	u32 eap;
	u8 des;
	u8 derrsyn;
	u16 errsts2;
};

static const struct i82875p_dev_info i82875p_devs[] = {
	[I82875P] = {
		.ctl_name = "i82875p"},
};

static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
					 * already registered driver
					 */

static struct edac_pci_ctl_info *i82875p_pci;

static void i82875p_get_error_info(struct mem_ctl_info *mci,
				struct i82875p_error_info *info)
{
	struct pci_dev *pdev;

	pdev = to_pci_dev(mci->dev);

	/*
	 * This is a mess because there is no atomic way to read all the
	 * registers at once and the registers can transition from CE being
	 * overwritten by UE.
	 */
	pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts);

	if (!(info->errsts & 0x0081))
		return;

	pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
	pci_read_config_byte(pdev, I82875P_DES, &info->des);
	pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
	pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2);

	/*
	 * If the error is the same then we can for both reads then
	 * the first set of reads is valid.  If there is a change then
	 * there is a CE no info and the second set of reads is valid
	 * and should be UE info.
	 */
	if ((info->errsts ^ info->errsts2) & 0x0081) {
		pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
		pci_read_config_byte(pdev, I82875P_DES, &info->des);
		pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
	}

	pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081);
}

static int i82875p_process_error_info(struct mem_ctl_info *mci,
				struct i82875p_error_info *info,
				int handle_errors)
{
	int row, multi_chan;

	multi_chan = mci->csrows[0].nr_channels - 1;

	if (!(info->errsts & 0x0081))
		return 0;

	if (!handle_errors)
		return 1;

	if ((info->errsts ^ info->errsts2) & 0x0081) {
		edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
		info->errsts = info->errsts2;
	}

	info->eap >>= PAGE_SHIFT;
	row = edac_mc_find_csrow_by_page(mci, info->eap);

	if (info->errsts & 0x0080)
		edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE");
	else
		edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row,
				multi_chan ? (info->des & 0x1) : 0,
				"i82875p CE");

	return 1;
}

static void i82875p_check(struct mem_ctl_info *mci)
{
	struct i82875p_error_info info;

	debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
	i82875p_get_error_info(mci, &info);
	i82875p_process_error_info(mci, &info, 1);
}

/* Return 0 on success or 1 on failure. */
static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
				struct pci_dev **ovrfl_pdev,
				void __iomem **ovrfl_window)
{
	struct pci_dev *dev;
	void __iomem *window;
	int err;

	*ovrfl_pdev = NULL;
	*ovrfl_window = NULL;
	dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);

	if (dev == NULL) {
		/* Intel tells BIOS developers to hide device 6 which
		 * configures the overflow device access containing
		 * the DRBs - this is where we expose device 6.
		 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
		 */
		pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
		dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));

		if (dev == NULL)
			return 1;

		err = pci_bus_add_device(dev);
		if (err) {
			i82875p_printk(KERN_ERR,
				"%s(): pci_bus_add_device() Failed\n",
				__func__);
		}
		pci_bus_assign_resources(dev->bus);
	}

	*ovrfl_pdev = dev;

	if (pci_enable_device(dev)) {
		i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow "
			"device\n", __func__);
		return 1;
	}

	if (pci_request_regions(dev, pci_name(dev))) {
#ifdef CORRECT_BIOS
		goto fail0;
#endif
	}

	/* cache is irrelevant for PCI bus reads/writes */
	window = pci_ioremap_bar(dev, 0);
	if (window == NULL) {
		i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
			__func__);
		goto fail1;
	}

	*ovrfl_window = window;
	return 0;

fail1:
	pci_release_regions(dev);

#ifdef CORRECT_BIOS
fail0:
	pci_disable_device(dev);
#endif
	/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
	return 1;
}

/* Return 1 if dual channel mode is active.  Else return 0. */
static inline int dual_channel_active(u32 drc)
{
	return (drc >> 21) & 0x1;
}

static void i82875p_init_csrows(struct mem_ctl_info *mci,
				struct pci_dev *pdev,
				void __iomem * ovrfl_window, u32 drc)
{
	struct csrow_info *csrow;
	unsigned long last_cumul_size;
	u8 value;
	u32 drc_ddim;		/* DRAM Data Integrity Mode 0=none,2=edac */
	u32 cumul_size;
	int index;

	drc_ddim = (drc >> 18) & 0x1;
	last_cumul_size = 0;

	/* The dram row boundary (DRB) reg values are boundary address
	 * for each DRAM row with a granularity of 32 or 64MB (single/dual
	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
	 * contain the total memory contained in all eight rows.
	 */

	for (index = 0; index < mci->nr_csrows; index++) {
		csrow = &mci->csrows[index];

		value = readb(ovrfl_window + I82875P_DRB + index);
		cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
		debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
			cumul_size);
		if (cumul_size == last_cumul_size)
			continue;	/* not populated */

		csrow->first_page = last_cumul_size;
		csrow->last_page = cumul_size - 1;
		csrow->nr_pages = cumul_size - last_cumul_size;
		last_cumul_size = cumul_size;
		csrow->grain = 1 << 12;	/* I82875P_EAP has 4KiB reolution */
		csrow->mtype = MEM_DDR;
		csrow->dtype = DEV_UNKNOWN;
		csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
	}
}

static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
{
	int rc = -ENODEV;
	struct mem_ctl_info *mci;
	struct i82875p_pvt *pvt;
	struct pci_dev *ovrfl_pdev;
	void __iomem *ovrfl_window;
	u32 drc;
	u32 nr_chans;
	struct i82875p_error_info discard;

	debugf0("%s()\n", __func__);

	ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);

	if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
		return -ENODEV;
	drc = readl(ovrfl_window + I82875P_DRC);
	nr_chans = dual_channel_active(drc) + 1;
	mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
			nr_chans, 0);

	if (!mci) {
		rc = -ENOMEM;
		goto fail0;
	}

	/* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
	kobject_get(&mci->edac_mci_kobj);

	debugf3("%s(): init mci\n", __func__);
	mci->dev = &pdev->dev;
	mci->mtype_cap = MEM_FLAG_DDR;
	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
	mci->edac_cap = EDAC_FLAG_UNKNOWN;
	mci->mod_name = EDAC_MOD_STR;
	mci->mod_ver = I82875P_REVISION;
	mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
	mci->dev_name = pci_name(pdev);
	mci->edac_check = i82875p_check;
	mci->ctl_page_to_phys = NULL;
	debugf3("%s(): init pvt\n", __func__);
	pvt = (struct i82875p_pvt *)mci->pvt_info;
	pvt->ovrfl_pdev = ovrfl_pdev;
	pvt->ovrfl_window = ovrfl_window;
	i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
	i82875p_get_error_info(mci, &discard);	/* clear counters */

	/* Here we assume that we will never see multiple instances of this
	 * type of memory controller.  The ID is therefore hardcoded to 0.
	 */
	if (edac_mc_add_mc(mci)) {
		debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
		goto fail1;
	}

	/* allocating generic PCI control info */
	i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
	if (!i82875p_pci) {
		printk(KERN_WARNING
			"%s(): Unable to create PCI control\n",
			__func__);
		printk(KERN_WARNING
			"%s(): PCI error report via EDAC not setup\n",
			__func__);
	}

	/* get this far and it's successful */
	debugf3("%s(): success\n", __func__);
	return 0;

fail1:
	kobject_put(&mci->edac_mci_kobj);
	edac_mc_free(mci);

fail0:
	iounmap(ovrfl_window);
	pci_release_regions(ovrfl_pdev);

	pci_disable_device(ovrfl_pdev);
	/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
	return rc;
}

/* returns count (>= 0), or negative on error */
static int __devinit i82875p_init_one(struct pci_dev *pdev,
				const struct pci_device_id *ent)
{
	int rc;

	debugf0("%s()\n", __func__);
	i82875p_printk(KERN_INFO, "i82875p init one\n");

	if (pci_enable_device(pdev) < 0)
		return -EIO;

	rc = i82875p_probe1(pdev, ent->driver_data);

	if (mci_pdev == NULL)
		mci_pdev = pci_dev_get(pdev);

	return rc;
}

static void __devexit i82875p_remove_one(struct pci_dev *pdev)
{
	struct mem_ctl_info *mci;
	struct i82875p_pvt *pvt = NULL;

	debugf0("%s()\n", __func__);

	if (i82875p_pci)
		edac_pci_release_generic_ctl(i82875p_pci);

	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
		return;

	pvt = (struct i82875p_pvt *)mci->pvt_info;

	if (pvt->ovrfl_window)
		iounmap(pvt->ovrfl_window);

	if (pvt->ovrfl_pdev) {
#ifdef CORRECT_BIOS
		pci_release_regions(pvt->ovrfl_pdev);
#endif				/*CORRECT_BIOS */
		pci_disable_device(pvt->ovrfl_pdev);
		pci_dev_put(pvt->ovrfl_pdev);
	}

	edac_mc_free(mci);
}

static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = {
	{
	 PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
	 I82875P},
	{
	 0,
	 }			/* 0 terminated list. */
};

MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);

static struct pci_driver i82875p_driver = {
	.name = EDAC_MOD_STR,
	.probe = i82875p_init_one,
	.remove = __devexit_p(i82875p_remove_one),
	.id_table = i82875p_pci_tbl,
};

static int __init i82875p_init(void)
{
	int pci_rc;

	debugf3("%s()\n", __func__);

       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
       opstate_init();

	pci_rc = pci_register_driver(&i82875p_driver);

	if (pci_rc < 0)
		goto fail0;

	if (mci_pdev == NULL) {
		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
					PCI_DEVICE_ID_INTEL_82875_0, NULL);

		if (!mci_pdev) {
			debugf0("875p pci_get_device fail\n");
			pci_rc = -ENODEV;
			goto fail1;
		}

		pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);

		if (pci_rc < 0) {
			debugf0("875p init fail\n");
			pci_rc = -ENODEV;
			goto fail1;
		}
	}

	return 0;

fail1:
	pci_unregister_driver(&i82875p_driver);

fail0:
	if (mci_pdev != NULL)
		pci_dev_put(mci_pdev);

	return pci_rc;
}

static void __exit i82875p_exit(void)
{
	debugf3("%s()\n", __func__);

	i82875p_remove_one(mci_pdev);
	pci_dev_put(mci_pdev);

	pci_unregister_driver(&i82875p_driver);

}

module_init(i82875p_init);
module_exit(i82875p_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");

module_param(edac_op_state, int, 0444);
MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
Commit	Line	Data
0d88a10e AC	1	/*
	2	* Intel D82875P Memory Controller kernel module
	3	* (C) 2003 Linux Networx (http://lnxi.com)
	4	* This file may be distributed under the terms of the
	5	* GNU General Public License.
	6	*
	7	* Written by Thayne Harbaugh
	8	* Contributors:
	9	* Wang Zhenyu at intel.com
	10	*
	11	* $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
	12	*
	13	* Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
	14	*/
	15
0d88a10e AC	16	#include <linux/module.h>
0d88a10e AC	17	#include <linux/init.h>
0d88a10e AC	18	#include <linux/pci.h>
0d88a10e AC	19	#include <linux/pci_ids.h>
c3c52bce	20	#include <linux/edac.h>
20bcb7a8	21	#include "edac_core.h"
0d88a10e	22
20bcb7a8	23	#define I82875P_REVISION " Ver: 2.0.2 " __DATE__
929a40ec	24	#define EDAC_MOD_STR "i82875p_edac"
37f04581	25
537fba28	26	#define i82875p_printk(level, fmt, arg...) \
e7ecd891	27	edac_printk(level, "i82875p", fmt, ##arg)
537fba28 DP	28
537fba28 DP	29	#define i82875p_mc_printk(mci, level, fmt, arg...) \
e7ecd891	30	edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)
537fba28	31
0d88a10e AC	32	#ifndef PCI_DEVICE_ID_INTEL_82875_0
	33	#define PCI_DEVICE_ID_INTEL_82875_0 0x2578
	34	#endif /* PCI_DEVICE_ID_INTEL_82875_0 */
	35
	36	#ifndef PCI_DEVICE_ID_INTEL_82875_6
	37	#define PCI_DEVICE_ID_INTEL_82875_6 0x257e
	38	#endif /* PCI_DEVICE_ID_INTEL_82875_6 */
	39
0d88a10e AC	40	/* four csrows in dual channel, eight in single channel */
	41	#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans))
	42
0d88a10e AC	43	/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
	44	#define I82875P_EAP 0x58 /* Error Address Pointer (32b)
	45	*
	46	* 31:12 block address
	47	* 11:0 reserved
	48	*/
	49
	50	#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b)
	51	*
	52	* 7:0 DRAM ECC Syndrome
	53	*/
	54
	55	#define I82875P_DES 0x5d /* DRAM Error Status (8b)
	56	*
	57	* 7:1 reserved
	58	* 0 Error channel 0/1
	59	*/
	60
	61	#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b)
	62	*
	63	* 15:10 reserved
	64	* 9 non-DRAM lock error (ndlock)
	65	* 8 Sftwr Generated SMI
	66	* 7 ECC UE
	67	* 6 reserved
	68	* 5 MCH detects unimplemented cycle
	69	* 4 AGP access outside GA
	70	* 3 Invalid AGP access
	71	* 2 Invalid GA translation table
	72	* 1 Unsupported AGP command
	73	* 0 ECC CE
	74	*/
	75
	76	#define I82875P_ERRCMD 0xca /* Error Command (16b)
	77	*
	78	* 15:10 reserved
	79	* 9 SERR on non-DRAM lock
	80	* 8 SERR on ECC UE
	81	* 7 SERR on ECC CE
	82	* 6 target abort on high exception
	83	* 5 detect unimplemented cyc
	84	* 4 AGP access outside of GA
	85	* 3 SERR on invalid AGP access
	86	* 2 invalid translation table
	87	* 1 SERR on unsupported AGP command
	88	* 0 reserved
	89	*/
	90
0d88a10e AC	91	/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
	92	#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b)
	93	*
	94	* 15:10 reserved
	95	* 9 fast back-to-back - ro 0
	96	* 8 SERR enable - ro 0
	97	* 7 addr/data stepping - ro 0
	98	* 6 parity err enable - ro 0
	99	* 5 VGA palette snoop - ro 0
	100	* 4 mem wr & invalidate - ro 0
	101	* 3 special cycle - ro 0
	102	* 2 bus master - ro 0
	103	* 1 mem access dev6 - 0(dis),1(en)
	104	* 0 IO access dev3 - 0(dis),1(en)
	105	*/
	106
	107	#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b)
	108	*
	109	* 31:12 mem base addr [31:12]
	110	* 11:4 address mask - ro 0
	111	* 3 prefetchable - ro 0(non),1(pre)
	112	* 2:1 mem type - ro 0
	113	* 0 mem space - ro 0
	114	*/
	115
	116	/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */
	117
	118	#define I82875P_DRB_SHIFT 26 /* 64MiB grain */
	119	#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8)
	120	*
	121	* 7 reserved
	122	* 6:0 64MiB row boundary addr
	123	*/
	124
	125	#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8)
	126	*
	127	* 7 reserved
	128	* 6:4 row attr row 1
	129	* 3 reserved
	130	* 2:0 row attr row 0
	131	*
	132	* 000 = 4KiB
	133	* 001 = 8KiB
	134	* 010 = 16KiB
	135	* 011 = 32KiB
	136	*/
	137
	138	#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b)
	139	*
	140	* 31:30 reserved
	141	* 29 init complete
	142	* 28:23 reserved
	143	* 22:21 nr chan 00=1,01=2
	144	* 20 reserved
	145	* 19:18 Data Integ Mode 00=none,01=ecc
	146	* 17:11 reserved
	147	* 10:8 refresh mode
	148	* 7 reserved
	149	* 6:4 mode select
	150	* 3:2 reserved
	151	* 1:0 DRAM type 01=DDR
	152	*/
	153
0d88a10e AC	154	enum i82875p_chips {
	155	I82875P = 0,
	156	};
	157
0d88a10e AC	158	struct i82875p_pvt {
0d88a10e AC	159	struct pci_dev *ovrfl_pdev;
6d57348d	160	void __iomem *ovrfl_window;
0d88a10e AC	161	};
0d88a10e AC	162
0d88a10e AC	163	struct i82875p_dev_info {
	164	const char *ctl_name;
	165	};
	166
0d88a10e AC	167	struct i82875p_error_info {
	168	u16 errsts;
	169	u32 eap;
	170	u8 des;
	171	u8 derrsyn;
	172	u16 errsts2;
	173	};
	174
0d88a10e AC	175	static const struct i82875p_dev_info i82875p_devs[] = {
0d88a10e AC	176	[I82875P] = {
052dfb45	177	.ctl_name = "i82875p"},
0d88a10e AC	178	};
0d88a10e AC	179
f044091c	180	static struct pci_dev mci_pdev; / init dev: in case that AGP code has
e7ecd891 DP	181	* already registered driver
	182	*/
	183
456a2f95 DJ	184	static struct edac_pci_ctl_info *i82875p_pci;
456a2f95 DJ	185
e7ecd891	186	static void i82875p_get_error_info(struct mem_ctl_info *mci,
052dfb45	187	struct i82875p_error_info *info)
0d88a10e	188	{
37f04581 DT	189	struct pci_dev *pdev;
	190
	191	pdev = to_pci_dev(mci->dev);
	192
0d88a10e AC	193	/*
	194	* This is a mess because there is no atomic way to read all the
	195	* registers at once and the registers can transition from CE being
	196	* overwritten by UE.
	197	*/
37f04581	198	pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts);
654ede20 JU	199
	200	if (!(info->errsts & 0x0081))
	201	return;
	202
37f04581 DT	203	pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
	204	pci_read_config_byte(pdev, I82875P_DES, &info->des);
	205	pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
	206	pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2);
0d88a10e	207
0d88a10e AC	208	/*
	209	* If the error is the same then we can for both reads then
	210	* the first set of reads is valid. If there is a change then
	211	* there is a CE no info and the second set of reads is valid
	212	* and should be UE info.
	213	*/
0d88a10e	214	if ((info->errsts ^ info->errsts2) & 0x0081) {
37f04581 DT	215	pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
37f04581 DT	216	pci_read_config_byte(pdev, I82875P_DES, &info->des);
466b71d5	217	pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
0d88a10e	218	}
654ede20 JU	219
654ede20 JU	220	pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081);
0d88a10e AC	221	}
0d88a10e AC	222
e7ecd891	223	static int i82875p_process_error_info(struct mem_ctl_info *mci,
052dfb45 DT	224	struct i82875p_error_info *info,
052dfb45 DT	225	int handle_errors)
0d88a10e AC	226	{
	227	int row, multi_chan;
	228
	229	multi_chan = mci->csrows[0].nr_channels - 1;
	230
654ede20	231	if (!(info->errsts & 0x0081))
0d88a10e AC	232	return 0;
	233
	234	if (!handle_errors)
	235	return 1;
	236
	237	if ((info->errsts ^ info->errsts2) & 0x0081) {
	238	edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
	239	info->errsts = info->errsts2;
	240	}
	241
	242	info->eap >>= PAGE_SHIFT;
	243	row = edac_mc_find_csrow_by_page(mci, info->eap);
	244
	245	if (info->errsts & 0x0080)
	246	edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE");
	247	else
	248	edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row,
052dfb45 DT	249	multi_chan ? (info->des & 0x1) : 0,
052dfb45 DT	250	"i82875p CE");
0d88a10e AC	251
	252	return 1;
	253	}
	254
0d88a10e AC	255	static void i82875p_check(struct mem_ctl_info *mci)
	256	{
	257	struct i82875p_error_info info;
	258
537fba28	259	debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
0d88a10e AC	260	i82875p_get_error_info(mci, &info);
	261	i82875p_process_error_info(mci, &info, 1);
	262	}
	263
13189525 DT	264	/* Return 0 on success or 1 on failure. */
13189525 DT	265	static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
052dfb45 DT	266	struct pci_dev **ovrfl_pdev,
052dfb45 DT	267	void __iomem **ovrfl_window)
0d88a10e	268	{
13189525 DT	269	struct pci_dev *dev;
13189525 DT	270	void __iomem *window;
1c52152b	271	int err;
0d88a10e	272
13189525 DT	273	*ovrfl_pdev = NULL;
	274	*ovrfl_window = NULL;
	275	dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
0d88a10e	276
13189525 DT	277	if (dev == NULL) {
13189525 DT	278	/* Intel tells BIOS developers to hide device 6 which
0d88a10e AC	279	* configures the overflow device access containing
	280	* the DRBs - this is where we expose device 6.
	281	* http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
	282	*/
	283	pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
13189525	284	dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
e7ecd891	285
13189525 DT	286	if (dev == NULL)
13189525 DT	287	return 1;
62456726	288
1c52152b DT	289	err = pci_bus_add_device(dev);
	290	if (err) {
	291	i82875p_printk(KERN_ERR,
	292	"%s(): pci_bus_add_device() Failed\n",
	293	__func__);
	294	}
307d1144	295	pci_bus_assign_resources(dev->bus);
0d88a10e	296	}
e7ecd891	297
13189525 DT	298	*ovrfl_pdev = dev;
13189525 DT	299
13189525 DT	300	if (pci_enable_device(dev)) {
13189525 DT	301	i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow "
052dfb45	302	"device\n", __func__);
13189525	303	return 1;
0d88a10e AC	304	}
0d88a10e AC	305
13189525	306	if (pci_request_regions(dev, pci_name(dev))) {
0d88a10e	307	#ifdef CORRECT_BIOS
637beb69	308	goto fail0;
0d88a10e AC	309	#endif
0d88a10e AC	310	}
e7ecd891	311
0d88a10e	312	/* cache is irrelevant for PCI bus reads/writes */
1dca00bd	313	window = pci_ioremap_bar(dev, 0);
13189525	314	if (window == NULL) {
537fba28	315	i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
052dfb45	316	__func__);
637beb69	317	goto fail1;
0d88a10e AC	318	}
0d88a10e AC	319
13189525 DT	320	*ovrfl_window = window;
13189525 DT	321	return 0;
0d88a10e	322
052dfb45	323	fail1:
13189525	324	pci_release_regions(dev);
0d88a10e	325
13189525	326	#ifdef CORRECT_BIOS
052dfb45	327	fail0:
13189525 DT	328	pci_disable_device(dev);
	329	#endif
	330	/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
	331	return 1;
	332	}
0d88a10e	333
13189525 DT	334	/* Return 1 if dual channel mode is active. Else return 0. */
	335	static inline int dual_channel_active(u32 drc)
	336	{
	337	return (drc >> 21) & 0x1;
	338	}
0d88a10e	339
13189525	340	static void i82875p_init_csrows(struct mem_ctl_info *mci,
466b71d5 DJ	341	struct pci_dev *pdev,
466b71d5 DJ	342	void __iomem * ovrfl_window, u32 drc)
13189525 DT	343	{
	344	struct csrow_info *csrow;
	345	unsigned long last_cumul_size;
	346	u8 value;
466b71d5	347	u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
13189525 DT	348	u32 cumul_size;
	349	int index;
	350
	351	drc_ddim = (drc >> 18) & 0x1;
	352	last_cumul_size = 0;
	353
	354	/* The dram row boundary (DRB) reg values are boundary address
0d88a10e AC	355	* for each DRAM row with a granularity of 32 or 64MB (single/dual
	356	* channel operation). DRB regs are cumulative; therefore DRB7 will
	357	* contain the total memory contained in all eight rows.
	358	*/
13189525 DT	359
	360	for (index = 0; index < mci->nr_csrows; index++) {
	361	csrow = &mci->csrows[index];
0d88a10e AC	362
	363	value = readb(ovrfl_window + I82875P_DRB + index);
	364	cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
537fba28 DP	365	debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
537fba28 DP	366	cumul_size);
0d88a10e AC	367	if (cumul_size == last_cumul_size)
	368	continue; /* not populated */
	369
	370	csrow->first_page = last_cumul_size;
	371	csrow->last_page = cumul_size - 1;
	372	csrow->nr_pages = cumul_size - last_cumul_size;
	373	last_cumul_size = cumul_size;
13189525	374	csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */
0d88a10e AC	375	csrow->mtype = MEM_DDR;
	376	csrow->dtype = DEV_UNKNOWN;
	377	csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
	378	}
13189525 DT	379	}
	380
	381	static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
	382	{
	383	int rc = -ENODEV;
	384	struct mem_ctl_info *mci;
	385	struct i82875p_pvt *pvt;
	386	struct pci_dev *ovrfl_pdev;
	387	void __iomem *ovrfl_window;
	388	u32 drc;
	389	u32 nr_chans;
	390	struct i82875p_error_info discard;
0d88a10e	391
13189525	392	debugf0("%s()\n", __func__);
c3c52bce	393
13189525 DT	394	ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
	395
	396	if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
	397	return -ENODEV;
	398	drc = readl(ovrfl_window + I82875P_DRC);
	399	nr_chans = dual_channel_active(drc) + 1;
	400	mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
b8f6f975	401	nr_chans, 0);
13189525 DT	402
	403	if (!mci) {
	404	rc = -ENOMEM;
	405	goto fail0;
	406	}
	407
09a81269 JL	408	/* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
	409	kobject_get(&mci->edac_mci_kobj);
	410
13189525 DT	411	debugf3("%s(): init mci\n", __func__);
	412	mci->dev = &pdev->dev;
	413	mci->mtype_cap = MEM_FLAG_DDR;
	414	mci->edac_ctl_cap = EDAC_FLAG_NONE \| EDAC_FLAG_SECDED;
	415	mci->edac_cap = EDAC_FLAG_UNKNOWN;
	416	mci->mod_name = EDAC_MOD_STR;
	417	mci->mod_ver = I82875P_REVISION;
	418	mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
c4192705	419	mci->dev_name = pci_name(pdev);
13189525 DT	420	mci->edac_check = i82875p_check;
	421	mci->ctl_page_to_phys = NULL;
	422	debugf3("%s(): init pvt\n", __func__);
466b71d5	423	pvt = (struct i82875p_pvt *)mci->pvt_info;
13189525 DT	424	pvt->ovrfl_pdev = ovrfl_pdev;
	425	pvt->ovrfl_window = ovrfl_window;
	426	i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
466b71d5	427	i82875p_get_error_info(mci, &discard); /* clear counters */
0d88a10e	428
2d7bbb91 DT	429	/* Here we assume that we will never see multiple instances of this
	430	* type of memory controller. The ID is therefore hardcoded to 0.
	431	*/
b8f6f975	432	if (edac_mc_add_mc(mci)) {
537fba28	433	debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
13189525	434	goto fail1;
0d88a10e AC	435	}
0d88a10e AC	436
456a2f95 DJ	437	/* allocating generic PCI control info */
	438	i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
	439	if (!i82875p_pci) {
	440	printk(KERN_WARNING
	441	"%s(): Unable to create PCI control\n",
	442	__func__);
	443	printk(KERN_WARNING
	444	"%s(): PCI error report via EDAC not setup\n",
	445	__func__);
	446	}
	447
0d88a10e	448	/* get this far and it's successful */
537fba28	449	debugf3("%s(): success\n", __func__);
0d88a10e AC	450	return 0;
0d88a10e AC	451
052dfb45	452	fail1:
09a81269	453	kobject_put(&mci->edac_mci_kobj);
637beb69	454	edac_mc_free(mci);
0d88a10e	455
052dfb45	456	fail0:
637beb69	457	iounmap(ovrfl_window);
637beb69	458	pci_release_regions(ovrfl_pdev);
0d88a10e	459
637beb69	460	pci_disable_device(ovrfl_pdev);
0d88a10e AC	461	/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
	462	return rc;
	463	}
	464
0d88a10e AC	465	/* returns count (>= 0), or negative on error */
0d88a10e AC	466	static int __devinit i82875p_init_one(struct pci_dev *pdev,
052dfb45	467	const struct pci_device_id *ent)
0d88a10e AC	468	{
	469	int rc;
	470
537fba28	471	debugf0("%s()\n", __func__);
537fba28	472	i82875p_printk(KERN_INFO, "i82875p init one\n");
e7ecd891 DP	473
e7ecd891 DP	474	if (pci_enable_device(pdev) < 0)
0d88a10e	475	return -EIO;
e7ecd891	476
0d88a10e	477	rc = i82875p_probe1(pdev, ent->driver_data);
e7ecd891	478
0d88a10e AC	479	if (mci_pdev == NULL)
0d88a10e AC	480	mci_pdev = pci_dev_get(pdev);
e7ecd891	481
0d88a10e AC	482	return rc;
	483	}
	484
0d88a10e AC	485	static void __devexit i82875p_remove_one(struct pci_dev *pdev)
	486	{
	487	struct mem_ctl_info *mci;
	488	struct i82875p_pvt *pvt = NULL;
	489
537fba28	490	debugf0("%s()\n", __func__);
0d88a10e	491
456a2f95 DJ	492	if (i82875p_pci)
	493	edac_pci_release_generic_ctl(i82875p_pci);
	494
37f04581	495	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
0d88a10e AC	496	return;
0d88a10e AC	497
466b71d5	498	pvt = (struct i82875p_pvt *)mci->pvt_info;
e7ecd891	499
0d88a10e AC	500	if (pvt->ovrfl_window)
	501	iounmap(pvt->ovrfl_window);
	502
	503	if (pvt->ovrfl_pdev) {
	504	#ifdef CORRECT_BIOS
	505	pci_release_regions(pvt->ovrfl_pdev);
	506	#endif /CORRECT_BIOS /
	507	pci_disable_device(pvt->ovrfl_pdev);
	508	pci_dev_put(pvt->ovrfl_pdev);
	509	}
	510
0d88a10e AC	511	edac_mc_free(mci);
	512	}
	513
0d88a10e	514	static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = {
e7ecd891	515	{
466b71d5 DJ	516	PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
466b71d5 DJ	517	I82875P},
e7ecd891	518	{
466b71d5 DJ	519	0,
466b71d5 DJ	520	} /* 0 terminated list. */
0d88a10e AC	521	};
	522
	523	MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
	524
0d88a10e	525	static struct pci_driver i82875p_driver = {
680cbbbb	526	.name = EDAC_MOD_STR,
0d88a10e AC	527	.probe = i82875p_init_one,
	528	.remove = __devexit_p(i82875p_remove_one),
	529	.id_table = i82875p_pci_tbl,
	530	};
	531
da9bb1d2	532	static int __init i82875p_init(void)
0d88a10e AC	533	{
	534	int pci_rc;
	535
537fba28	536	debugf3("%s()\n", __func__);
c3c52bce HM	537
	538	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
	539	opstate_init();
	540
0d88a10e	541	pci_rc = pci_register_driver(&i82875p_driver);
e7ecd891	542
0d88a10e	543	if (pci_rc < 0)
637beb69	544	goto fail0;
e7ecd891	545
0d88a10e	546	if (mci_pdev == NULL) {
e7ecd891	547	mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
052dfb45	548	PCI_DEVICE_ID_INTEL_82875_0, NULL);
e7ecd891	549
0d88a10e AC	550	if (!mci_pdev) {
0d88a10e AC	551	debugf0("875p pci_get_device fail\n");
637beb69 DP	552	pci_rc = -ENODEV;
637beb69 DP	553	goto fail1;
0d88a10e	554	}
e7ecd891	555
0d88a10e	556	pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
e7ecd891	557
0d88a10e AC	558	if (pci_rc < 0) {
0d88a10e AC	559	debugf0("875p init fail\n");
637beb69 DP	560	pci_rc = -ENODEV;
637beb69 DP	561	goto fail1;
0d88a10e AC	562	}
0d88a10e AC	563	}
e7ecd891	564
0d88a10e	565	return 0;
637beb69	566
052dfb45	567	fail1:
637beb69 DP	568	pci_unregister_driver(&i82875p_driver);
637beb69 DP	569
052dfb45	570	fail0:
637beb69 DP	571	if (mci_pdev != NULL)
	572	pci_dev_put(mci_pdev);
	573
	574	return pci_rc;
0d88a10e AC	575	}
0d88a10e AC	576
0d88a10e AC	577	static void __exit i82875p_exit(void)
0d88a10e AC	578	{
537fba28	579	debugf3("%s()\n", __func__);
0d88a10e	580
09a81269 JL	581	i82875p_remove_one(mci_pdev);
	582	pci_dev_put(mci_pdev);
	583
0d88a10e	584	pci_unregister_driver(&i82875p_driver);
e7ecd891	585
0d88a10e AC	586	}
0d88a10e AC	587
0d88a10e AC	588	module_init(i82875p_init);
	589	module_exit(i82875p_exit);
	590
0d88a10e AC	591	MODULE_LICENSE("GPL");
	592	MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
	593	MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");
c3c52bce HM	594
	595	module_param(edac_op_state, int, 0444);
	596	MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");