]>
Commit | Line | Data |
---|---|---|
9fe757b0 JC |
1 | /* Copyright (C) 2004-2006, Advanced Micro Devices, Inc. |
2 | * | |
3 | * This program is free software; you can redistribute it and/or modify | |
4 | * it under the terms of the GNU General Public License as published by | |
5 | * the Free Software Foundation; either version 2 of the License, or | |
6 | * (at your option) any later version. | |
7 | */ | |
8 | ||
9 | #include <linux/module.h> | |
10 | #include <linux/kernel.h> | |
9fe757b0 JC |
11 | #include <linux/pci.h> |
12 | #include <linux/pci_ids.h> | |
13 | #include <linux/crypto.h> | |
14 | #include <linux/spinlock.h> | |
15 | #include <crypto/algapi.h> | |
16 | ||
17 | #include <asm/io.h> | |
18 | #include <asm/delay.h> | |
19 | ||
20 | #include "geode-aes.h" | |
21 | ||
22 | /* Register definitions */ | |
23 | ||
24 | #define AES_CTRLA_REG 0x0000 | |
25 | ||
26 | #define AES_CTRL_START 0x01 | |
27 | #define AES_CTRL_DECRYPT 0x00 | |
28 | #define AES_CTRL_ENCRYPT 0x02 | |
29 | #define AES_CTRL_WRKEY 0x04 | |
30 | #define AES_CTRL_DCA 0x08 | |
31 | #define AES_CTRL_SCA 0x10 | |
32 | #define AES_CTRL_CBC 0x20 | |
33 | ||
34 | #define AES_INTR_REG 0x0008 | |
35 | ||
36 | #define AES_INTRA_PENDING (1 << 16) | |
37 | #define AES_INTRB_PENDING (1 << 17) | |
38 | ||
39 | #define AES_INTR_PENDING (AES_INTRA_PENDING | AES_INTRB_PENDING) | |
40 | #define AES_INTR_MASK 0x07 | |
41 | ||
42 | #define AES_SOURCEA_REG 0x0010 | |
43 | #define AES_DSTA_REG 0x0014 | |
44 | #define AES_LENA_REG 0x0018 | |
45 | #define AES_WRITEKEY0_REG 0x0030 | |
46 | #define AES_WRITEIV0_REG 0x0040 | |
47 | ||
48 | /* A very large counter that is used to gracefully bail out of an | |
49 | * operation in case of trouble | |
50 | */ | |
51 | ||
52 | #define AES_OP_TIMEOUT 0x50000 | |
53 | ||
54 | /* Static structures */ | |
55 | ||
56 | static void __iomem * _iobase; | |
57 | static spinlock_t lock; | |
58 | ||
59 | /* Write a 128 bit field (either a writable key or IV) */ | |
60 | static inline void | |
61 | _writefield(u32 offset, void *value) | |
62 | { | |
63 | int i; | |
64 | for(i = 0; i < 4; i++) | |
65 | iowrite32(((u32 *) value)[i], _iobase + offset + (i * 4)); | |
66 | } | |
67 | ||
68 | /* Read a 128 bit field (either a writable key or IV) */ | |
69 | static inline void | |
70 | _readfield(u32 offset, void *value) | |
71 | { | |
72 | int i; | |
73 | for(i = 0; i < 4; i++) | |
74 | ((u32 *) value)[i] = ioread32(_iobase + offset + (i * 4)); | |
75 | } | |
76 | ||
77 | static int | |
78 | do_crypt(void *src, void *dst, int len, u32 flags) | |
79 | { | |
80 | u32 status; | |
81 | u32 counter = AES_OP_TIMEOUT; | |
82 | ||
83 | iowrite32(virt_to_phys(src), _iobase + AES_SOURCEA_REG); | |
84 | iowrite32(virt_to_phys(dst), _iobase + AES_DSTA_REG); | |
85 | iowrite32(len, _iobase + AES_LENA_REG); | |
86 | ||
87 | /* Start the operation */ | |
88 | iowrite32(AES_CTRL_START | flags, _iobase + AES_CTRLA_REG); | |
89 | ||
90 | do | |
91 | status = ioread32(_iobase + AES_INTR_REG); | |
92 | while(!(status & AES_INTRA_PENDING) && --counter); | |
93 | ||
94 | /* Clear the event */ | |
95 | iowrite32((status & 0xFF) | AES_INTRA_PENDING, _iobase + AES_INTR_REG); | |
96 | return counter ? 0 : 1; | |
97 | } | |
98 | ||
ab782705 | 99 | static unsigned int |
9fe757b0 JC |
100 | geode_aes_crypt(struct geode_aes_op *op) |
101 | { | |
9fe757b0 | 102 | u32 flags = 0; |
5efee174 | 103 | unsigned long iflags; |
9fe757b0 | 104 | |
761e7846 | 105 | if (op->len == 0) |
9fe757b0 JC |
106 | return 0; |
107 | ||
761e7846 JC |
108 | /* If the source and destination is the same, then |
109 | * we need to turn on the coherent flags, otherwise | |
110 | * we don't need to worry | |
111 | */ | |
112 | ||
113 | if (op->src == op->dst) | |
9fe757b0 JC |
114 | flags |= (AES_CTRL_DCA | AES_CTRL_SCA); |
115 | ||
116 | if (op->dir == AES_DIR_ENCRYPT) | |
117 | flags |= AES_CTRL_ENCRYPT; | |
118 | ||
119 | /* Start the critical section */ | |
120 | ||
121 | spin_lock_irqsave(&lock, iflags); | |
122 | ||
123 | if (op->mode == AES_MODE_CBC) { | |
124 | flags |= AES_CTRL_CBC; | |
125 | _writefield(AES_WRITEIV0_REG, op->iv); | |
126 | } | |
127 | ||
761e7846 | 128 | if (!(op->flags & AES_FLAGS_HIDDENKEY)) { |
9fe757b0 JC |
129 | flags |= AES_CTRL_WRKEY; |
130 | _writefield(AES_WRITEKEY0_REG, op->key); | |
131 | } | |
132 | ||
133 | do_crypt(op->src, op->dst, op->len, flags); | |
134 | ||
135 | if (op->mode == AES_MODE_CBC) | |
136 | _readfield(AES_WRITEIV0_REG, op->iv); | |
137 | ||
138 | spin_unlock_irqrestore(&lock, iflags); | |
139 | ||
140 | return op->len; | |
141 | } | |
142 | ||
143 | /* CRYPTO-API Functions */ | |
144 | ||
145 | static int | |
146 | geode_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int len) | |
147 | { | |
148 | struct geode_aes_op *op = crypto_tfm_ctx(tfm); | |
149 | ||
150 | if (len != AES_KEY_LENGTH) { | |
151 | tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; | |
152 | return -EINVAL; | |
153 | } | |
154 | ||
155 | memcpy(op->key, key, len); | |
156 | return 0; | |
157 | } | |
158 | ||
159 | static void | |
160 | geode_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) | |
161 | { | |
162 | struct geode_aes_op *op = crypto_tfm_ctx(tfm); | |
163 | ||
164 | if ((out == NULL) || (in == NULL)) | |
165 | return; | |
166 | ||
167 | op->src = (void *) in; | |
168 | op->dst = (void *) out; | |
169 | op->mode = AES_MODE_ECB; | |
170 | op->flags = 0; | |
171 | op->len = AES_MIN_BLOCK_SIZE; | |
172 | op->dir = AES_DIR_ENCRYPT; | |
173 | ||
174 | geode_aes_crypt(op); | |
175 | } | |
176 | ||
177 | ||
178 | static void | |
179 | geode_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) | |
180 | { | |
181 | struct geode_aes_op *op = crypto_tfm_ctx(tfm); | |
182 | ||
183 | if ((out == NULL) || (in == NULL)) | |
184 | return; | |
185 | ||
186 | op->src = (void *) in; | |
187 | op->dst = (void *) out; | |
188 | op->mode = AES_MODE_ECB; | |
189 | op->flags = 0; | |
190 | op->len = AES_MIN_BLOCK_SIZE; | |
191 | op->dir = AES_DIR_DECRYPT; | |
192 | ||
193 | geode_aes_crypt(op); | |
194 | } | |
195 | ||
196 | ||
197 | static struct crypto_alg geode_alg = { | |
198 | .cra_name = "aes", | |
199 | .cra_driver_name = "geode-aes-128", | |
200 | .cra_priority = 300, | |
201 | .cra_alignmask = 15, | |
202 | .cra_flags = CRYPTO_ALG_TYPE_CIPHER, | |
203 | .cra_blocksize = AES_MIN_BLOCK_SIZE, | |
204 | .cra_ctxsize = sizeof(struct geode_aes_op), | |
205 | .cra_module = THIS_MODULE, | |
206 | .cra_list = LIST_HEAD_INIT(geode_alg.cra_list), | |
207 | .cra_u = { | |
208 | .cipher = { | |
209 | .cia_min_keysize = AES_KEY_LENGTH, | |
210 | .cia_max_keysize = AES_KEY_LENGTH, | |
211 | .cia_setkey = geode_setkey, | |
212 | .cia_encrypt = geode_encrypt, | |
213 | .cia_decrypt = geode_decrypt | |
214 | } | |
215 | } | |
216 | }; | |
217 | ||
218 | static int | |
219 | geode_cbc_decrypt(struct blkcipher_desc *desc, | |
220 | struct scatterlist *dst, struct scatterlist *src, | |
221 | unsigned int nbytes) | |
222 | { | |
223 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
224 | struct blkcipher_walk walk; | |
225 | int err, ret; | |
226 | ||
227 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
228 | err = blkcipher_walk_virt(desc, &walk); | |
229 | ||
230 | while((nbytes = walk.nbytes)) { | |
231 | op->src = walk.src.virt.addr, | |
232 | op->dst = walk.dst.virt.addr; | |
233 | op->mode = AES_MODE_CBC; | |
234 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
235 | op->dir = AES_DIR_DECRYPT; | |
236 | ||
237 | memcpy(op->iv, walk.iv, AES_IV_LENGTH); | |
238 | ||
239 | ret = geode_aes_crypt(op); | |
240 | ||
241 | memcpy(walk.iv, op->iv, AES_IV_LENGTH); | |
242 | nbytes -= ret; | |
243 | ||
244 | err = blkcipher_walk_done(desc, &walk, nbytes); | |
245 | } | |
246 | ||
247 | return err; | |
248 | } | |
249 | ||
250 | static int | |
251 | geode_cbc_encrypt(struct blkcipher_desc *desc, | |
252 | struct scatterlist *dst, struct scatterlist *src, | |
253 | unsigned int nbytes) | |
254 | { | |
255 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
256 | struct blkcipher_walk walk; | |
257 | int err, ret; | |
258 | ||
259 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
260 | err = blkcipher_walk_virt(desc, &walk); | |
261 | ||
262 | while((nbytes = walk.nbytes)) { | |
263 | op->src = walk.src.virt.addr, | |
264 | op->dst = walk.dst.virt.addr; | |
265 | op->mode = AES_MODE_CBC; | |
266 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
267 | op->dir = AES_DIR_ENCRYPT; | |
268 | ||
269 | memcpy(op->iv, walk.iv, AES_IV_LENGTH); | |
270 | ||
271 | ret = geode_aes_crypt(op); | |
272 | nbytes -= ret; | |
273 | err = blkcipher_walk_done(desc, &walk, nbytes); | |
274 | } | |
275 | ||
276 | return err; | |
277 | } | |
278 | ||
279 | static struct crypto_alg geode_cbc_alg = { | |
280 | .cra_name = "cbc(aes)", | |
281 | .cra_driver_name = "cbc-aes-geode-128", | |
282 | .cra_priority = 400, | |
283 | .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, | |
284 | .cra_blocksize = AES_MIN_BLOCK_SIZE, | |
285 | .cra_ctxsize = sizeof(struct geode_aes_op), | |
286 | .cra_alignmask = 15, | |
287 | .cra_type = &crypto_blkcipher_type, | |
288 | .cra_module = THIS_MODULE, | |
289 | .cra_list = LIST_HEAD_INIT(geode_cbc_alg.cra_list), | |
290 | .cra_u = { | |
291 | .blkcipher = { | |
292 | .min_keysize = AES_KEY_LENGTH, | |
293 | .max_keysize = AES_KEY_LENGTH, | |
294 | .setkey = geode_setkey, | |
295 | .encrypt = geode_cbc_encrypt, | |
296 | .decrypt = geode_cbc_decrypt, | |
761e7846 | 297 | .ivsize = AES_IV_LENGTH, |
9fe757b0 JC |
298 | } |
299 | } | |
300 | }; | |
301 | ||
302 | static int | |
303 | geode_ecb_decrypt(struct blkcipher_desc *desc, | |
304 | struct scatterlist *dst, struct scatterlist *src, | |
305 | unsigned int nbytes) | |
306 | { | |
307 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
308 | struct blkcipher_walk walk; | |
309 | int err, ret; | |
310 | ||
311 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
312 | err = blkcipher_walk_virt(desc, &walk); | |
313 | ||
314 | while((nbytes = walk.nbytes)) { | |
315 | op->src = walk.src.virt.addr, | |
316 | op->dst = walk.dst.virt.addr; | |
317 | op->mode = AES_MODE_ECB; | |
318 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
319 | op->dir = AES_DIR_DECRYPT; | |
320 | ||
321 | ret = geode_aes_crypt(op); | |
322 | nbytes -= ret; | |
323 | err = blkcipher_walk_done(desc, &walk, nbytes); | |
324 | } | |
325 | ||
326 | return err; | |
327 | } | |
328 | ||
329 | static int | |
330 | geode_ecb_encrypt(struct blkcipher_desc *desc, | |
331 | struct scatterlist *dst, struct scatterlist *src, | |
332 | unsigned int nbytes) | |
333 | { | |
334 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
335 | struct blkcipher_walk walk; | |
336 | int err, ret; | |
337 | ||
338 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
339 | err = blkcipher_walk_virt(desc, &walk); | |
340 | ||
341 | while((nbytes = walk.nbytes)) { | |
342 | op->src = walk.src.virt.addr, | |
343 | op->dst = walk.dst.virt.addr; | |
344 | op->mode = AES_MODE_ECB; | |
345 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
346 | op->dir = AES_DIR_ENCRYPT; | |
347 | ||
348 | ret = geode_aes_crypt(op); | |
349 | nbytes -= ret; | |
350 | ret = blkcipher_walk_done(desc, &walk, nbytes); | |
351 | } | |
352 | ||
353 | return err; | |
354 | } | |
355 | ||
356 | static struct crypto_alg geode_ecb_alg = { | |
357 | .cra_name = "ecb(aes)", | |
358 | .cra_driver_name = "ecb-aes-geode-128", | |
359 | .cra_priority = 400, | |
360 | .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, | |
361 | .cra_blocksize = AES_MIN_BLOCK_SIZE, | |
362 | .cra_ctxsize = sizeof(struct geode_aes_op), | |
363 | .cra_alignmask = 15, | |
364 | .cra_type = &crypto_blkcipher_type, | |
365 | .cra_module = THIS_MODULE, | |
366 | .cra_list = LIST_HEAD_INIT(geode_ecb_alg.cra_list), | |
367 | .cra_u = { | |
368 | .blkcipher = { | |
369 | .min_keysize = AES_KEY_LENGTH, | |
370 | .max_keysize = AES_KEY_LENGTH, | |
371 | .setkey = geode_setkey, | |
372 | .encrypt = geode_ecb_encrypt, | |
373 | .decrypt = geode_ecb_decrypt, | |
374 | } | |
375 | } | |
376 | }; | |
377 | ||
378 | static void | |
379 | geode_aes_remove(struct pci_dev *dev) | |
380 | { | |
381 | crypto_unregister_alg(&geode_alg); | |
382 | crypto_unregister_alg(&geode_ecb_alg); | |
383 | crypto_unregister_alg(&geode_cbc_alg); | |
384 | ||
385 | pci_iounmap(dev, _iobase); | |
386 | _iobase = NULL; | |
387 | ||
388 | pci_release_regions(dev); | |
389 | pci_disable_device(dev); | |
390 | } | |
391 | ||
392 | ||
393 | static int | |
394 | geode_aes_probe(struct pci_dev *dev, const struct pci_device_id *id) | |
395 | { | |
396 | int ret; | |
397 | ||
398 | if ((ret = pci_enable_device(dev))) | |
399 | return ret; | |
400 | ||
401 | if ((ret = pci_request_regions(dev, "geode-aes-128"))) | |
402 | goto eenable; | |
403 | ||
404 | _iobase = pci_iomap(dev, 0, 0); | |
405 | ||
406 | if (_iobase == NULL) { | |
407 | ret = -ENOMEM; | |
408 | goto erequest; | |
409 | } | |
410 | ||
411 | spin_lock_init(&lock); | |
412 | ||
413 | /* Clear any pending activity */ | |
414 | iowrite32(AES_INTR_PENDING | AES_INTR_MASK, _iobase + AES_INTR_REG); | |
415 | ||
416 | if ((ret = crypto_register_alg(&geode_alg))) | |
417 | goto eiomap; | |
418 | ||
419 | if ((ret = crypto_register_alg(&geode_ecb_alg))) | |
420 | goto ealg; | |
421 | ||
422 | if ((ret = crypto_register_alg(&geode_cbc_alg))) | |
423 | goto eecb; | |
424 | ||
425 | printk(KERN_NOTICE "geode-aes: GEODE AES engine enabled.\n"); | |
426 | return 0; | |
427 | ||
428 | eecb: | |
429 | crypto_unregister_alg(&geode_ecb_alg); | |
430 | ||
431 | ealg: | |
432 | crypto_unregister_alg(&geode_alg); | |
433 | ||
434 | eiomap: | |
435 | pci_iounmap(dev, _iobase); | |
436 | ||
437 | erequest: | |
438 | pci_release_regions(dev); | |
439 | ||
440 | eenable: | |
441 | pci_disable_device(dev); | |
442 | ||
443 | printk(KERN_ERR "geode-aes: GEODE AES initialization failed.\n"); | |
444 | return ret; | |
445 | } | |
446 | ||
447 | static struct pci_device_id geode_aes_tbl[] = { | |
448 | { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LX_AES, PCI_ANY_ID, PCI_ANY_ID} , | |
449 | { 0, } | |
450 | }; | |
451 | ||
452 | MODULE_DEVICE_TABLE(pci, geode_aes_tbl); | |
453 | ||
454 | static struct pci_driver geode_aes_driver = { | |
455 | .name = "Geode LX AES", | |
456 | .id_table = geode_aes_tbl, | |
457 | .probe = geode_aes_probe, | |
458 | .remove = __devexit_p(geode_aes_remove) | |
459 | }; | |
460 | ||
461 | static int __init | |
462 | geode_aes_init(void) | |
463 | { | |
09cb914f | 464 | return pci_register_driver(&geode_aes_driver); |
9fe757b0 JC |
465 | } |
466 | ||
467 | static void __exit | |
468 | geode_aes_exit(void) | |
469 | { | |
470 | pci_unregister_driver(&geode_aes_driver); | |
471 | } | |
472 | ||
473 | MODULE_AUTHOR("Advanced Micro Devices, Inc."); | |
474 | MODULE_DESCRIPTION("Geode LX Hardware AES driver"); | |
475 | MODULE_LICENSE("GPL"); | |
f8246af0 | 476 | MODULE_ALIAS("aes"); |
9fe757b0 JC |
477 | |
478 | module_init(geode_aes_init); | |
479 | module_exit(geode_aes_exit); |