[net-next-2.6.git] / arch / m32r / Kconfig

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux/M32R Kernel Configuration"

config M32R
	bool
	default y

config SBUS
	bool

config GENERIC_ISA_DMA
	bool
	default y

config ZONE_DMA
	bool
	default y

config GENERIC_HARDIRQS
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

config NO_IOPORT
	def_bool y

source "init/Kconfig"


menu "Processor type and features"

choice
	prompt "Platform Type"
	default PLAT_MAPPI

config PLAT_MAPPI
	bool "Mappi-I"
	help
	  The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
	  You can operate a Linux system on this board by using an M32R
	  softmacro core, which is a fully-synthesizable functional model
	  described in Verilog-HDL.

	  The Mappi-I board was the first platform, which had been used
	  to port and develop a Linux system for the M32R processor.
	  Currently, the Mappi-II, an heir to the Mappi-I, is available.

config PLAT_USRV
	bool "uServer"

config PLAT_M32700UT
	bool "M32700UT"
	help
	  The M3T-M32700UT is an evaluation board based on uT-Engine
	  specification.  This board has an M32700 (Chaos) evaluation chip.
	  You can say Y for SMP, because the M32700 is a single chip
	  multiprocessor.

config PLAT_OPSPUT
	bool "OPSPUT"
	help
	  The OPSPUT is an evaluation board based on uT-Engine
	  specification.  This board has a OPSP-REP chip.

config PLAT_OAKS32R
	bool "OAKS32R"
	help
	  The OAKS32R is a tiny, inexpensive evaluation board.
	  Please note that if you say Y here and choose chip "M32102",
	  say N for MMU and select a no-MMU version kernel, otherwise
	  a kernel with MMU support will not work, because the M32102
	  is a microcontroller for embedded systems and it has no MMU.

config PLAT_MAPPI2
       bool "Mappi-II(M3A-ZA36/M3A-ZA52)"

config PLAT_MAPPI3
       bool "Mappi-III(M3A-2170)"

config PLAT_M32104UT
	bool "M32104UT"
	help
	  The M3T-M32104UT is an reference board based on uT-Engine
	  specification.  This board has a M32104 chip.

endchoice

choice
	prompt "Processor family"
	default CHIP_M32700

config CHIP_M32700
	bool "M32700 (Chaos)"

config CHIP_M32102
	bool "M32102"

config CHIP_M32104
	bool "M32104"
	depends on PLAT_M32104UT

config CHIP_VDEC2
       bool "VDEC2"

config CHIP_OPSP
       bool "OPSP"

endchoice

config MMU
	bool "Support for memory management hardware"
	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
	default y

config TLB_ENTRIES
       int "TLB Entries"
       depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
       default 32 if CHIP_M32700 || CHIP_OPSP
       default 16 if CHIP_VDEC2


config ISA_M32R
        bool
	depends on CHIP_M32102 || CHIP_M32104
	default y

config ISA_M32R2
	bool
	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
	default y

config ISA_DSP_LEVEL2
	bool
	depends on CHIP_M32700 || CHIP_OPSP
	default y

config ISA_DUAL_ISSUE
	bool
	depends on CHIP_M32700 || CHIP_OPSP
	default y

config BUS_CLOCK
	int "Bus Clock [Hz] (integer)"
	default "70000000" if PLAT_MAPPI
	default "25000000" if PLAT_USRV
	default "50000000" if PLAT_MAPPI3
	default "50000000" if PLAT_M32700UT
	default "50000000" if PLAT_OPSPUT
	default "54000000" if PLAT_M32104UT
	default "33333333" if PLAT_OAKS32R
	default "20000000" if PLAT_MAPPI2

config TIMER_DIVIDE
	int "Timer divider (integer)"
	default "128"

config CPU_LITTLE_ENDIAN
        bool "Generate little endian code"
	default n

config MEMORY_START
	hex "Physical memory start address (hex)"
	default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3
	default "08000000" if PLAT_USRV
	default "08000000" if PLAT_M32700UT
	default "08000000" if PLAT_OPSPUT
	default "04000000" if PLAT_M32104UT
	default "01000000" if PLAT_OAKS32R

config MEMORY_SIZE
	hex "Physical memory size (hex)"
	default "08000000" if PLAT_MAPPI3
	default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
	default "02000000" if PLAT_USRV
	default "01000000" if PLAT_M32700UT
	default "01000000" if PLAT_OPSPUT
	default "01000000" if PLAT_M32104UT
	default "00800000" if PLAT_OAKS32R

config NOHIGHMEM
	bool
	default y

config ARCH_DISCONTIGMEM_ENABLE
	bool "Internal RAM Support"
	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
	default y

source "mm/Kconfig"

config IRAM_START
	hex "Internal memory start address (hex)"
	default "00f00000" if !CHIP_M32104
	default "00700000" if CHIP_M32104
	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM

config IRAM_SIZE
	hex "Internal memory size (hex)"
	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
	default "00080000" if CHIP_M32700
	default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104
	default "00008000" if CHIP_VDEC2

#
# Define implied options from the CPU selection here
#

config RWSEM_GENERIC_SPINLOCK
	bool
	depends on M32R
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool
	default n

config ARCH_HAS_ILOG2_U32
	bool
	default n

config ARCH_HAS_ILOG2_U64
	bool
	default n

config GENERIC_FIND_NEXT_BIT
	bool
	default y

config GENERIC_HWEIGHT
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config SCHED_NO_NO_OMIT_FRAME_POINTER
        bool
        default y

config PREEMPT
	bool "Preemptible Kernel"
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

config SMP
	bool "Symmetric multi-processing support"
	---help---
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  singleprocessor machines. On a singleprocessor machine, the kernel
	  will run faster if you say N here.

	  People using multiprocessor machines who say Y here should also say
	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	  Management" code will be disabled if you say Y here.

	  See also the <file:Documentation/smp.txt>,
	  and the SMP-HOWTO available at
	  <http://www.linuxdoc.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config CHIP_M32700_TS1
	bool "Workaround code for the M32700 TS1 chip's bug"
	depends on (CHIP_M32700 && SMP)
	default n

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "2"
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.  The maximum supported value is 32 and the
	  minimum value which makes sense is 2.

	  This is purely to save memory - each supported CPU adds
	  approximately eight kilobytes to the kernel image.

# Common NUMA Features
config NUMA
	bool "Numa Memory Allocation Support"
	depends on SMP && BROKEN
	default n

config NODES_SHIFT
	int
	default "1"
	depends on NEED_MULTIPLE_NODES

# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
	bool
	depends on NUMA
	default n

endmenu


menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"

config PCI
	bool "PCI support"
	depends on BROKEN
	default n
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

	  The PCI-HOWTO, available from
	  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
	  information about which PCI hardware does work under Linux and which
	  doesn't.

choice
	prompt "PCI access mode"
	depends on PCI
	default PCI_GOANY

config PCI_GOBIOS
	bool "BIOS"
	---help---
	  On PCI systems, the BIOS can be used to detect the PCI devices and
	  determine their configuration. However, some old PCI motherboards
	  have BIOS bugs and may crash if this is done. Also, some embedded
	  PCI-based systems don't have any BIOS at all. Linux can also try to
	  detect the PCI hardware directly without using the BIOS.

	  With this option, you can specify how Linux should detect the PCI
	  devices. If you choose "BIOS", the BIOS will be used, if you choose
	  "Direct", the BIOS won't be used, and if you choose "Any", the
	  kernel will try the direct access method and falls back to the BIOS
	  if that doesn't work. If unsure, go with the default, which is
	  "Any".

config PCI_GODIRECT
	bool "Direct"

config PCI_GOANY
	bool "Any"

endchoice

config PCI_BIOS
	bool
	depends on PCI && (PCI_GOBIOS || PCI_GOANY)
	default y

config PCI_DIRECT
	bool
 	depends on PCI && (PCI_GODIRECT || PCI_GOANY)
	default y

source "drivers/pci/Kconfig"

config ISA
	bool "ISA support"
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  If you have ISA, say Y, otherwise N.

source "drivers/pcmcia/Kconfig"

source "drivers/pci/hotplug/Kconfig"

endmenu


menu "Executable file formats"

source "fs/Kconfig.binfmt"

endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/m32r/oprofile/Kconfig"

source "arch/m32r/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"
Commit	Line	Data
1da177e4 LT	1	#
	2	# For a description of the syntax of this configuration file,
	3	# see Documentation/kbuild/kconfig-language.txt.
	4	#
	5
	6	mainmenu "Linux/M32R Kernel Configuration"
	7
	8	config M32R
	9	bool
	10	default y
	11
	12	config SBUS
	13	bool
	14
1da177e4 LT	15	config GENERIC_ISA_DMA
	16	bool
	17	default y
	18
5ac6da66 CL	19	config ZONE_DMA
	20	bool
	21	default y
	22
1da177e4 LT	23	config GENERIC_HARDIRQS
	24	bool
	25	default y
	26
	27	config GENERIC_IRQ_PROBE
	28	bool
	29	default y
	30
5ea81769 AV	31	config NO_IOPORT
	32	def_bool y
	33
1da177e4 LT	34	source "init/Kconfig"
	35
	36
	37	menu "Processor type and features"
	38
	39	choice
	40	prompt "Platform Type"
	41	default PLAT_MAPPI
	42
	43	config PLAT_MAPPI
	44	bool "Mappi-I"
	45	help
	46	The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
	47	You can operate a Linux system on this board by using an M32R
	48	softmacro core, which is a fully-synthesizable functional model
	49	described in Verilog-HDL.
	50
	51	The Mappi-I board was the first platform, which had been used
	52	to port and develop a Linux system for the M32R processor.
	53	Currently, the Mappi-II, an heir to the Mappi-I, is available.
	54
	55	config PLAT_USRV
	56	bool "uServer"
	57
	58	config PLAT_M32700UT
	59	bool "M32700UT"
	60	help
	61	The M3T-M32700UT is an evaluation board based on uT-Engine
	62	specification. This board has an M32700 (Chaos) evaluation chip.
	63	You can say Y for SMP, because the M32700 is a single chip
	64	multiprocessor.
	65
	66	config PLAT_OPSPUT
	67	bool "OPSPUT"
	68	help
	69	The OPSPUT is an evaluation board based on uT-Engine
	70	specification. This board has a OPSP-REP chip.
	71
	72	config PLAT_OAKS32R
	73	bool "OAKS32R"
	74	help
	75	The OAKS32R is a tiny, inexpensive evaluation board.
	76	Please note that if you say Y here and choose chip "M32102",
	77	say N for MMU and select a no-MMU version kernel, otherwise
	78	a kernel with MMU support will not work, because the M32102
	79	is a microcontroller for embedded systems and it has no MMU.
	80
	81	config PLAT_MAPPI2
	82	bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
	83
23680863 HT	84	config PLAT_MAPPI3
	85	bool "Mappi-III(M3A-2170)"
	86
9287d95e HT	87	config PLAT_M32104UT
	88	bool "M32104UT"
	89	help
	90	The M3T-M32104UT is an reference board based on uT-Engine
	91	specification. This board has a M32104 chip.
	92
1da177e4 LT	93	endchoice
	94
	95	choice
	96	prompt "Processor family"
	97	default CHIP_M32700
	98
	99	config CHIP_M32700
	100	bool "M32700 (Chaos)"
	101
	102	config CHIP_M32102
	103	bool "M32102"
	104
9287d95e HT	105	config CHIP_M32104
	106	bool "M32104"
	107	depends on PLAT_M32104UT
	108
1da177e4 LT	109	config CHIP_VDEC2
	110	bool "VDEC2"
	111
	112	config CHIP_OPSP
	113	bool "OPSP"
	114
	115	endchoice
	116
	117	config MMU
	118	bool "Support for memory management hardware"
	119	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	120	default y
	121
	122	config TLB_ENTRIES
	123	int "TLB Entries"
	124	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	125	default 32 if CHIP_M32700 \|\| CHIP_OPSP
	126	default 16 if CHIP_VDEC2
	127
	128
	129	config ISA_M32R
	130	bool
9287d95e	131	depends on CHIP_M32102 \|\| CHIP_M32104
1da177e4 LT	132	default y
	133
	134	config ISA_M32R2
	135	bool
	136	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	137	default y
	138
	139	config ISA_DSP_LEVEL2
	140	bool
	141	depends on CHIP_M32700 \|\| CHIP_OPSP
	142	default y
	143
	144	config ISA_DUAL_ISSUE
	145	bool
	146	depends on CHIP_M32700 \|\| CHIP_OPSP
	147	default y
	148
	149	config BUS_CLOCK
	150	int "Bus Clock [Hz] (integer)"
	151	default "70000000" if PLAT_MAPPI
	152	default "25000000" if PLAT_USRV
23680863	153	default "50000000" if PLAT_MAPPI3
1da177e4 LT	154	default "50000000" if PLAT_M32700UT
1da177e4 LT	155	default "50000000" if PLAT_OPSPUT
9287d95e	156	default "54000000" if PLAT_M32104UT
1da177e4 LT	157	default "33333333" if PLAT_OAKS32R
	158	default "20000000" if PLAT_MAPPI2
	159
	160	config TIMER_DIVIDE
	161	int "Timer divider (integer)"
	162	default "128"
	163
	164	config CPU_LITTLE_ENDIAN
	165	bool "Generate little endian code"
	166	default n
	167
	168	config MEMORY_START
	169	hex "Physical memory start address (hex)"
23680863	170	default "08000000" if PLAT_MAPPI \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3
1da177e4 LT	171	default "08000000" if PLAT_USRV
	172	default "08000000" if PLAT_M32700UT
	173	default "08000000" if PLAT_OPSPUT
9287d95e	174	default "04000000" if PLAT_M32104UT
1da177e4 LT	175	default "01000000" if PLAT_OAKS32R
	176
	177	config MEMORY_SIZE
	178	hex "Physical memory size (hex)"
23680863	179	default "08000000" if PLAT_MAPPI3
1da177e4 LT	180	default "04000000" if PLAT_MAPPI \|\| PLAT_MAPPI2
	181	default "02000000" if PLAT_USRV
	182	default "01000000" if PLAT_M32700UT
	183	default "01000000" if PLAT_OPSPUT
9287d95e	184	default "01000000" if PLAT_M32104UT
1da177e4 LT	185	default "00800000" if PLAT_OAKS32R
	186
	187	config NOHIGHMEM
	188	bool
	189	default y
	190
3f22ab27	191	config ARCH_DISCONTIGMEM_ENABLE
1da177e4	192	bool "Internal RAM Support"
9287d95e	193	depends on CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104
1da177e4 LT	194	default y
1da177e4 LT	195
3f22ab27 DH	196	source "mm/Kconfig"
3f22ab27 DH	197
1da177e4 LT	198	config IRAM_START
1da177e4 LT	199	hex "Internal memory start address (hex)"
9287d95e HT	200	default "00f00000" if !CHIP_M32104
	201	default "00700000" if CHIP_M32104
	202	depends on (CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104) && DISCONTIGMEM
1da177e4 LT	203
	204	config IRAM_SIZE
	205	hex "Internal memory size (hex)"
9287d95e	206	depends on (CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104) && DISCONTIGMEM
1da177e4	207	default "00080000" if CHIP_M32700
9287d95e	208	default "00010000" if CHIP_M32102 \|\| CHIP_OPSP \|\| CHIP_M32104
1da177e4 LT	209	default "00008000" if CHIP_VDEC2
	210
	211	#
	212	# Define implied options from the CPU selection here
	213	#
	214
	215	config RWSEM_GENERIC_SPINLOCK
	216	bool
	217	depends on M32R
	218	default y
	219
	220	config RWSEM_XCHGADD_ALGORITHM
	221	bool
	222	default n
	223
f0d1b0b3 DH	224	config ARCH_HAS_ILOG2_U32
	225	bool
	226	default n
	227
	228	config ARCH_HAS_ILOG2_U64
	229	bool
	230	default n
	231
6d9f937b AM	232	config GENERIC_FIND_NEXT_BIT
	233	bool
	234	default y
	235
	236	config GENERIC_HWEIGHT
	237	bool
	238	default y
	239
1da177e4 LT	240	config GENERIC_CALIBRATE_DELAY
	241	bool
	242	default y
	243
43c09ce7 HT	244	config SCHED_NO_NO_OMIT_FRAME_POINTER
	245	bool
	246	default y
	247
1da177e4 LT	248	config PREEMPT
	249	bool "Preemptible Kernel"
	250	help
	251	This option reduces the latency of the kernel when reacting to
	252	real-time or interactive events by allowing a low priority process to
	253	be preempted even if it is in kernel mode executing a system call.
	254	This allows applications to run more reliably even when the system is
	255	under load.
	256
	257	Say Y here if you are building a kernel for a desktop, embedded
	258	or real-time system. Say N if you are unsure.
	259
1da177e4 LT	260	config SMP
	261	bool "Symmetric multi-processing support"
	262	---help---
	263	This enables support for systems with more than one CPU. If you have
	264	a system with only one CPU, like most personal computers, say N. If
	265	you have a system with more than one CPU, say Y.
	266
	267	If you say N here, the kernel will run on single and multiprocessor
	268	machines, but will use only one CPU of a multiprocessor machine. If
	269	you say Y here, the kernel will run on many, but not all,
	270	singleprocessor machines. On a singleprocessor machine, the kernel
	271	will run faster if you say N here.
	272
	273	People using multiprocessor machines who say Y here should also say
	274	Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	275	Management" code will be disabled if you say Y here.
	276
12c62c2e AO	277	See also the <file:Documentation/smp.txt>,
12c62c2e AO	278	and the SMP-HOWTO available at
1da177e4 LT	279	<http://www.linuxdoc.org/docs.html#howto>.
	280
	281	If you don't know what to do here, say N.
	282
	283	config CHIP_M32700_TS1
	284	bool "Workaround code for the M32700 TS1 chip's bug"
	285	depends on (CHIP_M32700 && SMP)
	286	default n
	287
	288	config NR_CPUS
	289	int "Maximum number of CPUs (2-32)"
	290	range 2 32
	291	depends on SMP
	292	default "2"
	293	help
	294	This allows you to specify the maximum number of CPUs which this
	295	kernel will support. The maximum supported value is 32 and the
	296	minimum value which makes sense is 2.
	297
	298	This is purely to save memory - each supported CPU adds
	299	approximately eight kilobytes to the kernel image.
	300
	301	# Common NUMA Features
	302	config NUMA
	303	bool "Numa Memory Allocation Support"
c5596b26	304	depends on SMP && BROKEN
1da177e4 LT	305	default n
1da177e4 LT	306
c80d79d7 YG	307	config NODES_SHIFT
	308	int
	309	default "1"
	310	depends on NEED_MULTIPLE_NODES
	311
1da177e4 LT	312	# turning this on wastes a bunch of space.
	313	# Summit needs it only when NUMA is on
	314	config BOOT_IOREMAP
	315	bool
	316	depends on NUMA
	317	default n
	318
	319	endmenu
	320
	321
	322	menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
	323
	324	config PCI
	325	bool "PCI support"
c3a0f771	326	depends on BROKEN
1da177e4 LT	327	default n
	328	help
	329	Find out whether you have a PCI motherboard. PCI is the name of a
	330	bus system, i.e. the way the CPU talks to the other stuff inside
	331	your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	332	VESA. If you have PCI, say Y, otherwise N.
	333
	334	The PCI-HOWTO, available from
	335	<http://www.linuxdoc.org/docs.html#howto>, contains valuable
	336	information about which PCI hardware does work under Linux and which
	337	doesn't.
	338
	339	choice
	340	prompt "PCI access mode"
	341	depends on PCI
	342	default PCI_GOANY
	343
	344	config PCI_GOBIOS
	345	bool "BIOS"
	346	---help---
	347	On PCI systems, the BIOS can be used to detect the PCI devices and
	348	determine their configuration. However, some old PCI motherboards
	349	have BIOS bugs and may crash if this is done. Also, some embedded
	350	PCI-based systems don't have any BIOS at all. Linux can also try to
	351	detect the PCI hardware directly without using the BIOS.
	352
	353	With this option, you can specify how Linux should detect the PCI
	354	devices. If you choose "BIOS", the BIOS will be used, if you choose
	355	"Direct", the BIOS won't be used, and if you choose "Any", the
	356	kernel will try the direct access method and falls back to the BIOS
	357	if that doesn't work. If unsure, go with the default, which is
	358	"Any".
	359
	360	config PCI_GODIRECT
	361	bool "Direct"
	362
	363	config PCI_GOANY
	364	bool "Any"
	365
	366	endchoice
	367
	368	config PCI_BIOS
	369	bool
	370	depends on PCI && (PCI_GOBIOS \|\| PCI_GOANY)
	371	default y
	372
	373	config PCI_DIRECT
	374	bool
	375	depends on PCI && (PCI_GODIRECT \|\| PCI_GOANY)
	376	default y
	377
	378	source "drivers/pci/Kconfig"
	379
	380	config ISA
	381	bool "ISA support"
	382	help
	383	Find out whether you have ISA slots on your motherboard. ISA is the
	384	name of a bus system, i.e. the way the CPU talks to the other stuff
	385	inside your box. If you have ISA, say Y, otherwise N.
	386
	387	source "drivers/pcmcia/Kconfig"
	388
	389	source "drivers/pci/hotplug/Kconfig"
	390
391	endmenu
392
393
394	menu "Executable file formats"
395
396	source "fs/Kconfig.binfmt"
397
398	endmenu
399
d5950b43 SR	400	source "net/Kconfig"
d5950b43 SR	401
1da177e4 LT	402	source "drivers/Kconfig"
	403
	404	source "fs/Kconfig"
	405
	406	source "arch/m32r/oprofile/Kconfig"
	407
	408	source "arch/m32r/Kconfig.debug"
	409
	410	source "security/Kconfig"
	411
	412	source "crypto/Kconfig"
	413
	414	source "lib/Kconfig"