[net-next-2.6.git] / arch / cris / Kconfig

#
# For a description of the syntax of this configuration file,
# see the Configure script.
#

mainmenu "Linux/CRIS Kernel Configuration"

config MMU
	bool
	default y

config UID16
	bool
	default y

config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config CRIS
	bool
	default y

source "init/Kconfig"

menu "General setup"

source "fs/Kconfig.binfmt"

config ETRAX_CMDLINE
	string "Kernel command line"
	default "root=/dev/mtdblock3"
	help
	  Pass additional commands to the kernel.

config ETRAX_WATCHDOG
	bool "Enable ETRAX watchdog"
	help
	  Enable the built-in watchdog timer support on ETRAX based embedded
	  network computers.

config ETRAX_WATCHDOG_NICE_DOGGY
	bool "Disable watchdog during Oops printouts"
	depends on ETRAX_WATCHDOG
	help
	  By enabling this you make sure that the watchdog does not bite while
	  printing oopses. Recommended for development systems but not for
	  production releases.

config ETRAX_FAST_TIMER
       bool "Enable ETRAX fast timer API"
       help
         This options enables the API to a fast timer implementation using
	 timer1 to get sub jiffie resolution timers (primarily one-shot
	 timers).
	 This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.

config PREEMPT
	bool "Preemptible Kernel"
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

source mm/Kconfig

endmenu

menu "Hardware setup"

choice
	prompt "Processor type"
	default ETRAX100LX

config ETRAX100LX
	bool "ETRAX-100LX-v1"
	help
	  Support version 1 of the ETRAX 100LX.

config ETRAX100LX_V2
	bool "ETRAX-100LX-v2"
	help
	  Support version 2 of the ETRAX 100LX.

config SVINTO_SIM
	bool "ETRAX-100LX-for-xsim-simulator"
	help
	  Support the xsim ETRAX Simulator.

endchoice

config ETRAX_ARCH_V10
       bool
       default y if ETRAX100LX || ETRAX100LX_V2
       default n if !(ETRAX100LX || ETRAX100LX_V2)

config ETRAX_DRAM_SIZE
	int "DRAM size (dec, in MB)"
	default "8"
	help
	  Size of DRAM (decimal in MB) typically 2, 8 or 16.

config ETRAX_FLASH_BUSWIDTH
	int "Buswidth of flash in bytes"
	default "2"
	help
	  Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.

source arch/cris/arch-v10/Kconfig

endmenu

# bring in ETRAX built-in drivers
menu "Drivers for built-in interfaces"
source arch/cris/arch-v10/drivers/Kconfig

endmenu

source "drivers/base/Kconfig"

# standard linux drivers
source "drivers/mtd/Kconfig"

source "drivers/parport/Kconfig"

source "drivers/pnp/Kconfig"

source "drivers/block/Kconfig"

source "drivers/md/Kconfig"

source "drivers/ide/Kconfig"

source "drivers/scsi/Kconfig"

source "drivers/ieee1394/Kconfig"

source "drivers/message/i2o/Kconfig"

source "net/Kconfig"

source "drivers/isdn/Kconfig"

source "drivers/telephony/Kconfig"

source "drivers/cdrom/Kconfig"

#
# input before char - char/joystick depends on it. As does USB.
#
source "drivers/input/Kconfig"

source "drivers/char/Kconfig"

#source drivers/misc/Config.in
source "drivers/media/Kconfig"

source "fs/Kconfig"

source "sound/Kconfig"

source "drivers/usb/Kconfig"

source "arch/cris/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"
Commit	Line	Data
1da177e4 LT	1	#
	2	# For a description of the syntax of this configuration file,
	3	# see the Configure script.
	4	#
	5
	6	mainmenu "Linux/CRIS Kernel Configuration"
	7
	8	config MMU
	9	bool
	10	default y
	11
	12	config UID16
	13	bool
	14	default y
	15
	16	config RWSEM_GENERIC_SPINLOCK
	17	bool
	18	default y
	19
	20	config RWSEM_XCHGADD_ALGORITHM
	21	bool
	22
	23	config GENERIC_CALIBRATE_DELAY
	24	bool
	25	default y
	26
	27	config CRIS
	28	bool
	29	default y
	30
	31	source "init/Kconfig"
	32
	33	menu "General setup"
	34
	35	source "fs/Kconfig.binfmt"
	36
	37	config ETRAX_CMDLINE
	38	string "Kernel command line"
	39	default "root=/dev/mtdblock3"
	40	help
	41	Pass additional commands to the kernel.
	42
	43	config ETRAX_WATCHDOG
	44	bool "Enable ETRAX watchdog"
	45	help
	46	Enable the built-in watchdog timer support on ETRAX based embedded
	47	network computers.
	48
	49	config ETRAX_WATCHDOG_NICE_DOGGY
	50	bool "Disable watchdog during Oops printouts"
	51	depends on ETRAX_WATCHDOG
	52	help
	53	By enabling this you make sure that the watchdog does not bite while
	54	printing oopses. Recommended for development systems but not for
	55	production releases.
	56
	57	config ETRAX_FAST_TIMER
	58	bool "Enable ETRAX fast timer API"
	59	help
	60	This options enables the API to a fast timer implementation using
	61	timer1 to get sub jiffie resolution timers (primarily one-shot
	62	timers).
	63	This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
	64
65	config PREEMPT
66	bool "Preemptible Kernel"
67	help
68	This option reduces the latency of the kernel when reacting to
69	real-time or interactive events by allowing a low priority process to
70	be preempted even if it is in kernel mode executing a system call.
71	This allows applications to run more reliably even when the system is
72	under load.
73
74	Say Y here if you are building a kernel for a desktop, embedded
75	or real-time system. Say N if you are unsure.
76
3f22ab27 DH	77	source mm/Kconfig
3f22ab27 DH	78
1da177e4 LT	79	endmenu
	80
	81	menu "Hardware setup"
	82
	83	choice
	84	prompt "Processor type"
	85	default ETRAX100LX
	86
	87	config ETRAX100LX
	88	bool "ETRAX-100LX-v1"
	89	help
	90	Support version 1 of the ETRAX 100LX.
	91
	92	config ETRAX100LX_V2
	93	bool "ETRAX-100LX-v2"
	94	help
	95	Support version 2 of the ETRAX 100LX.
	96
	97	config SVINTO_SIM
	98	bool "ETRAX-100LX-for-xsim-simulator"
	99	help
	100	Support the xsim ETRAX Simulator.
	101
	102	endchoice
	103
	104	config ETRAX_ARCH_V10
	105	bool
	106	default y if ETRAX100LX \|\| ETRAX100LX_V2
	107	default n if !(ETRAX100LX \|\| ETRAX100LX_V2)
	108
	109	config ETRAX_DRAM_SIZE
	110	int "DRAM size (dec, in MB)"
	111	default "8"
	112	help
	113	Size of DRAM (decimal in MB) typically 2, 8 or 16.
	114
	115	config ETRAX_FLASH_BUSWIDTH
	116	int "Buswidth of flash in bytes"
	117	default "2"
	118	help
	119	Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
	120
	121	source arch/cris/arch-v10/Kconfig
	122
	123	endmenu
	124
	125	# bring in ETRAX built-in drivers
	126	menu "Drivers for built-in interfaces"
	127	source arch/cris/arch-v10/drivers/Kconfig
	128
	129	endmenu
	130
	131	source "drivers/base/Kconfig"
	132
	133	# standard linux drivers
	134	source "drivers/mtd/Kconfig"
	135
	136	source "drivers/parport/Kconfig"
	137
	138	source "drivers/pnp/Kconfig"
	139
	140	source "drivers/block/Kconfig"
	141
	142	source "drivers/md/Kconfig"
143
144	source "drivers/ide/Kconfig"
145
146	source "drivers/scsi/Kconfig"
147
148	source "drivers/ieee1394/Kconfig"
149
150	source "drivers/message/i2o/Kconfig"
151
152	source "net/Kconfig"
153
154	source "drivers/isdn/Kconfig"
155
156	source "drivers/telephony/Kconfig"
157
158	source "drivers/cdrom/Kconfig"
159
160	#
161	# input before char - char/joystick depends on it. As does USB.
162	#
163	source "drivers/input/Kconfig"
164
165	source "drivers/char/Kconfig"
166
167	#source drivers/misc/Config.in
168	source "drivers/media/Kconfig"
169
170	source "fs/Kconfig"
171
172	source "sound/Kconfig"
173
174	source "drivers/usb/Kconfig"
175
176	source "arch/cris/Kconfig.debug"
177
178	source "security/Kconfig"
179
180	source "crypto/Kconfig"
181
182	source "lib/Kconfig"