[net-next-2.6.git] / arch / blackfin / mach-bf548 / boards / cm_bf548.c

/*
 * File:         arch/blackfin/mach-bf548/boards/cm_bf548.c
 * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
 * Author:       Aidan Williams <aidan@nicta.com.au>
 *
 * Created:
 * Description:
 *
 * Modified:
 *               Copyright 2005 National ICT Australia (NICTA)
 *               Copyright 2004-2008 Analog Devices Inc.
 *
 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see the file COPYING, or write
 * to the Free Software Foundation, Inc.,
 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/musb.h>
#include <asm/bfin5xx_spi.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
#include <asm/portmux.h>
#include <mach/bf54x_keys.h>
#include <asm/dpmc.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>

/*
 * Name the Board for the /proc/cpuinfo
 */
const char bfin_board_name[] = "Bluetechnix CM-BF548";

/*
 *  Driver needs to know address, irq and flag pin.
 */

#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)

#include <mach/bf54x-lq043.h>

static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
	.width =	480,
	.height =	272,
	.xres =		{480, 480, 480},
	.yres =		{272, 272, 272},
	.bpp =		{24, 24, 24},
	.disp =		GPIO_PE3,
};

static struct resource bf54x_lq043_resources[] = {
	{
		.start = IRQ_EPPI0_ERR,
		.end = IRQ_EPPI0_ERR,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device bf54x_lq043_device = {
	.name		= "bf54x-lq043",
	.id		= -1,
	.num_resources 	= ARRAY_SIZE(bf54x_lq043_resources),
	.resource 	= bf54x_lq043_resources,
	.dev		= {
		.platform_data = &bf54x_lq043_data,
	},
};
#endif

#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
static unsigned int bf548_keymap[] = {
	KEYVAL(0, 0, KEY_ENTER),
	KEYVAL(0, 1, KEY_HELP),
	KEYVAL(0, 2, KEY_0),
	KEYVAL(0, 3, KEY_BACKSPACE),
	KEYVAL(1, 0, KEY_TAB),
	KEYVAL(1, 1, KEY_9),
	KEYVAL(1, 2, KEY_8),
	KEYVAL(1, 3, KEY_7),
	KEYVAL(2, 0, KEY_DOWN),
	KEYVAL(2, 1, KEY_6),
	KEYVAL(2, 2, KEY_5),
	KEYVAL(2, 3, KEY_4),
	KEYVAL(3, 0, KEY_UP),
	KEYVAL(3, 1, KEY_3),
	KEYVAL(3, 2, KEY_2),
	KEYVAL(3, 3, KEY_1),
};

static struct bfin_kpad_platform_data bf54x_kpad_data = {
	.rows			= 4,
	.cols			= 4,
	.keymap 		= bf548_keymap,
	.keymapsize 		= ARRAY_SIZE(bf548_keymap),
	.repeat			= 0,
	.debounce_time		= 5000,	/* ns (5ms) */
	.coldrive_time		= 1000, /* ns (1ms) */
	.keyup_test_interval	= 50, /* ms (50ms) */
};

static struct resource bf54x_kpad_resources[] = {
	{
		.start = IRQ_KEY,
		.end = IRQ_KEY,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device bf54x_kpad_device = {
	.name		= "bf54x-keys",
	.id		= -1,
	.num_resources 	= ARRAY_SIZE(bf54x_kpad_resources),
	.resource 	= bf54x_kpad_resources,
	.dev		= {
		.platform_data = &bf54x_kpad_data,
	},
};
#endif

#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
	.name = "rtc-bfin",
	.id   = -1,
};
#endif

#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
	{
		.start = 0xFFC00400,
		.end = 0xFFC004FF,
		.flags = IORESOURCE_MEM,
	},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
	{
		.start = 0xFFC02000,
		.end = 0xFFC020FF,
		.flags = IORESOURCE_MEM,
	},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
	{
		.start = 0xFFC02100,
		.end = 0xFFC021FF,
		.flags = IORESOURCE_MEM,
	},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
	{
		.start = 0xFFC03100,
		.end = 0xFFC031FF,
		.flags = IORESOURCE_MEM,
	},
#endif
};

static struct platform_device bfin_uart_device = {
	.name = "bfin-uart",
	.id = 1,
	.num_resources = ARRAY_SIZE(bfin_uart_resources),
	.resource = bfin_uart_resources,
};
#endif

#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
static struct resource bfin_sir_resources[] = {
#ifdef CONFIG_BFIN_SIR0
	{
		.start = 0xFFC00400,
		.end = 0xFFC004FF,
		.flags = IORESOURCE_MEM,
	},
#endif
#ifdef CONFIG_BFIN_SIR1
	{
		.start = 0xFFC02000,
		.end = 0xFFC020FF,
		.flags = IORESOURCE_MEM,
	},
#endif
#ifdef CONFIG_BFIN_SIR2
	{
		.start = 0xFFC02100,
		.end = 0xFFC021FF,
		.flags = IORESOURCE_MEM,
	},
#endif
#ifdef CONFIG_BFIN_SIR3
	{
		.start = 0xFFC03100,
		.end = 0xFFC031FF,
		.flags = IORESOURCE_MEM,
	},
#endif
};

static struct platform_device bfin_sir_device = {
	.name = "bfin_sir",
	.id = 0,
	.num_resources = ARRAY_SIZE(bfin_sir_resources),
	.resource = bfin_sir_resources,
};
#endif

#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
static struct resource smsc911x_resources[] = {
	{
		.name = "smsc911x-memory",
		.start = 0x24000000,
		.end = 0x24000000 + 0xFF,
		.flags = IORESOURCE_MEM,
	},
	{
		.start = IRQ_PE6,
		.end = IRQ_PE6,
		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
	},
};
static struct platform_device smsc911x_device = {
	.name = "smsc911x",
	.id = 0,
	.num_resources = ARRAY_SIZE(smsc911x_resources),
	.resource = smsc911x_resources,
};
#endif

#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct resource musb_resources[] = {
	[0] = {
		.start	= 0xFFC03C00,
		.end	= 0xFFC040FF,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {	/* general IRQ */
		.start	= IRQ_USB_INT0,
		.end	= IRQ_USB_INT0,
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
	},
	[2] = {	/* DMA IRQ */
		.start	= IRQ_USB_DMA,
		.end	= IRQ_USB_DMA,
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
	},
};

static struct musb_hdrc_config musb_config = {
	.multipoint	= 0,
	.dyn_fifo	= 0,
	.soft_con	= 1,
	.dma		= 1,
	.num_eps	= 7,
	.dma_channels	= 7,
	.gpio_vrsel	= GPIO_PH6,
};

static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
	.mode		= MUSB_OTG,
#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
	.mode		= MUSB_HOST,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
	.mode		= MUSB_PERIPHERAL,
#endif
	.config		= &musb_config,
};

static u64 musb_dmamask = ~(u32)0;

static struct platform_device musb_device = {
	.name		= "musb_hdrc",
	.id		= 0,
	.dev = {
		.dma_mask		= &musb_dmamask,
		.coherent_dma_mask	= 0xffffffff,
		.platform_data		= &musb_plat,
	},
	.num_resources	= ARRAY_SIZE(musb_resources),
	.resource	= musb_resources,
};
#endif

#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
static struct resource bfin_atapi_resources[] = {
	{
		.start = 0xFFC03800,
		.end = 0xFFC0386F,
		.flags = IORESOURCE_MEM,
	},
	{
		.start = IRQ_ATAPI_ERR,
		.end = IRQ_ATAPI_ERR,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device bfin_atapi_device = {
	.name = "pata-bf54x",
	.id = -1,
	.num_resources = ARRAY_SIZE(bfin_atapi_resources),
	.resource = bfin_atapi_resources,
};
#endif

#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
	{
		.name = "linux kernel(nand)",
		.offset = 0,
		.size = 4 * 1024 * 1024,
	},
	{
		.name = "file system(nand)",
		.offset = 4 * 1024 * 1024,
		.size = (256 - 4) * 1024 * 1024,
	},
};

static struct bf5xx_nand_platform bf5xx_nand_platform = {
	.page_size = NFC_PG_SIZE_256,
	.data_width = NFC_NWIDTH_8,
	.partitions = partition_info,
	.nr_partitions = ARRAY_SIZE(partition_info),
	.rd_dly = 3,
	.wr_dly = 3,
};

static struct resource bf5xx_nand_resources[] = {
	{
		.start = 0xFFC03B00,
		.end = 0xFFC03B4F,
		.flags = IORESOURCE_MEM,
	},
	{
		.start = CH_NFC,
		.end = CH_NFC,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device bf5xx_nand_device = {
	.name = "bf5xx-nand",
	.id = 0,
	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
	.resource = bf5xx_nand_resources,
	.dev = {
		.platform_data = &bf5xx_nand_platform,
	},
};
#endif

#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
static struct platform_device bf54x_sdh_device = {
	.name = "bfin-sdh",
	.id = 0,
};
#endif

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
	|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
	{
		.name = "bootloader(spi)",
		.size = 0x00040000,
		.offset = 0,
		.mask_flags = MTD_CAP_ROM
	}, {
		.name = "linux kernel(spi)",
		.size = 0x1c0000,
		.offset = 0x40000
	}
};

static struct flash_platform_data bfin_spi_flash_data = {
	.name = "m25p80",
	.parts = bfin_spi_flash_partitions,
	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
	.type = "m25p16",
};

static struct bfin5xx_spi_chip spi_flash_chip_info = {
	.enable_dma = 0,         /* use dma transfer with this chip*/
	.bits_per_word = 8,
	.cs_change_per_word = 0,
};
#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
	.cs_change_per_word = 0,
	.enable_dma = 0,
	.bits_per_word = 16,
};

static const struct ad7877_platform_data bfin_ad7877_ts_info = {
	.model			= 7877,
	.vref_delay_usecs	= 50,	/* internal, no capacitor */
	.x_plate_ohms		= 419,
	.y_plate_ohms		= 486,
	.pressure_max		= 1000,
	.pressure_min		= 0,
	.stopacq_polarity 	= 1,
	.first_conversion_delay = 3,
	.acquisition_time 	= 1,
	.averaging 		= 1,
	.pen_down_acc_interval 	= 1,
};
#endif

#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
static struct bfin5xx_spi_chip spidev_chip_info = {
	.enable_dma = 0,
	.bits_per_word = 8,
};
#endif

static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
	|| defined(CONFIG_MTD_M25P80_MODULE)
	{
		/* the modalias must be the same as spi device driver name */
		.modalias = "m25p80", /* Name of spi_driver for this device */
		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
		.bus_num = 0, /* Framework bus number */
		.chip_select = 1, /* SPI_SSEL1*/
		.platform_data = &bfin_spi_flash_data,
		.controller_data = &spi_flash_chip_info,
		.mode = SPI_MODE_3,
	},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
	.modalias		= "ad7877",
	.platform_data		= &bfin_ad7877_ts_info,
	.irq			= IRQ_PJ11,
	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
	.bus_num		= 0,
	.chip_select  		= 2,
	.controller_data = &spi_ad7877_chip_info,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
	{
		.modalias = "spidev",
		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
		.bus_num = 0,
		.chip_select = 1,
		.controller_data = &spidev_chip_info,
	},
#endif
};

/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
	[0] = {
		.start = SPI0_REGBASE,
		.end   = SPI0_REGBASE + 0xFF,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = CH_SPI0,
		.end   = CH_SPI0,
		.flags = IORESOURCE_IRQ,
	}
};

/* SPI (1) */
static struct resource bfin_spi1_resource[] = {
	[0] = {
		.start = SPI1_REGBASE,
		.end   = SPI1_REGBASE + 0xFF,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = CH_SPI1,
		.end   = CH_SPI1,
		.flags = IORESOURCE_IRQ,
	}
};

/* SPI controller data */
static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
	.num_chipselect = 8,
	.enable_dma = 1,  /* master has the ability to do dma transfer */
	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};

static struct platform_device bf54x_spi_master0 = {
	.name = "bfin-spi",
	.id = 0, /* Bus number */
	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
	.resource = bfin_spi0_resource,
	.dev = {
		.platform_data = &bf54x_spi_master_info0, /* Passed to driver */
		},
};

static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
	.num_chipselect = 8,
	.enable_dma = 1,  /* master has the ability to do dma transfer */
	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};

static struct platform_device bf54x_spi_master1 = {
	.name = "bfin-spi",
	.id = 1, /* Bus number */
	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
	.resource = bfin_spi1_resource,
	.dev = {
		.platform_data = &bf54x_spi_master_info1, /* Passed to driver */
		},
};
#endif  /* spi master and devices */

#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
	[0] = {
		.start = TWI0_REGBASE,
		.end   = TWI0_REGBASE + 0xFF,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = IRQ_TWI0,
		.end   = IRQ_TWI0,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device i2c_bfin_twi0_device = {
	.name = "i2c-bfin-twi",
	.id = 0,
	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
	.resource = bfin_twi0_resource,
};

#if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
static struct resource bfin_twi1_resource[] = {
	[0] = {
		.start = TWI1_REGBASE,
		.end   = TWI1_REGBASE + 0xFF,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = IRQ_TWI1,
		.end   = IRQ_TWI1,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device i2c_bfin_twi1_device = {
	.name = "i2c-bfin-twi",
	.id = 1,
	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
	.resource = bfin_twi1_resource,
};
#endif
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>

static struct gpio_keys_button bfin_gpio_keys_table[] = {
	{BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
};

static struct gpio_keys_platform_data bfin_gpio_keys_data = {
	.buttons        = bfin_gpio_keys_table,
	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
};

static struct platform_device bfin_device_gpiokeys = {
	.name      = "gpio-keys",
	.dev = {
		.platform_data = &bfin_gpio_keys_data,
	},
};
#endif

static const unsigned int cclk_vlev_datasheet[] =
{
/*
 * Internal VLEV BF54XSBBC1533
 ****temporarily using these values until data sheet is updated
 */
	VRPAIR(VLEV_085, 150000000),
	VRPAIR(VLEV_090, 250000000),
	VRPAIR(VLEV_110, 276000000),
	VRPAIR(VLEV_115, 301000000),
	VRPAIR(VLEV_120, 525000000),
	VRPAIR(VLEV_125, 550000000),
	VRPAIR(VLEV_130, 600000000),
};

static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
	.tuple_tab = cclk_vlev_datasheet,
	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
	.vr_settling_time = 25 /* us */,
};

static struct platform_device bfin_dpmc = {
	.name = "bfin dpmc",
	.dev = {
		.platform_data = &bfin_dmpc_vreg_data,
	},
};

static struct platform_device *cm_bf548_devices[] __initdata = {

	&bfin_dpmc,

#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
	&rtc_device,
#endif

#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
	&bfin_uart_device,
#endif

#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
	&bfin_sir_device,
#endif

#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
	&bf54x_lq043_device,
#endif

#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
	&smsc911x_device,
#endif

#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
	&musb_device,
#endif

#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
	&bfin_atapi_device,
#endif

#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
	&bf5xx_nand_device,
#endif

#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
	&bf54x_sdh_device,
#endif

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
	&bf54x_spi_master0,
	&bf54x_spi_master1,
#endif

#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
	&bf54x_kpad_device,
#endif

#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
/*	&i2c_bfin_twi0_device, */
#if !defined(CONFIG_BF542)
	&i2c_bfin_twi1_device,
#endif
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
	&bfin_device_gpiokeys,
#endif
};

static int __init cm_bf548_init(void)
{
	printk(KERN_INFO "%s(): registering device resources\n", __func__);
	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
	spi_register_board_info(bf54x_spi_board_info,
			ARRAY_SIZE(bf54x_spi_board_info));
#endif

	return 0;
}

arch_initcall(cm_bf548_init);
Commit	Line	Data
db68254f MH	1	/*
	2	* File: arch/blackfin/mach-bf548/boards/cm_bf548.c
	3	* Based on: arch/blackfin/mach-bf537/boards/ezkit.c
	4	* Author: Aidan Williams <aidan@nicta.com.au>
	5	*
	6	* Created:
	7	* Description:
	8	*
	9	* Modified:
	10	* Copyright 2005 National ICT Australia (NICTA)
	11	* Copyright 2004-2008 Analog Devices Inc.
	12	*
	13	* Bugs: Enter bugs at http://blackfin.uclinux.org/
	14	*
	15	* This program is free software; you can redistribute it and/or modify
	16	* it under the terms of the GNU General Public License as published by
	17	* the Free Software Foundation; either version 2 of the License, or
	18	* (at your option) any later version.
	19	*
	20	* This program is distributed in the hope that it will be useful,
	21	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	22	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	23	* GNU General Public License for more details.
	24	*
	25	* You should have received a copy of the GNU General Public License
	26	* along with this program; if not, see the file COPYING, or write
	27	* to the Free Software Foundation, Inc.,
	28	* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	29	*/
	30
	31	#include <linux/device.h>
	32	#include <linux/platform_device.h>
	33	#include <linux/mtd/mtd.h>
	34	#include <linux/mtd/partitions.h>
	35	#include <linux/spi/spi.h>
	36	#include <linux/spi/flash.h>
	37	#include <linux/irq.h>
	38	#include <linux/interrupt.h>
	39	#include <linux/usb/musb.h>
	40	#include <asm/bfin5xx_spi.h>
db68254f MH	41	#include <asm/dma.h>
	42	#include <asm/gpio.h>
	43	#include <asm/nand.h>
	44	#include <asm/portmux.h>
639f6571	45	#include <mach/bf54x_keys.h>
14b03204	46	#include <asm/dpmc.h>
db68254f MH	47	#include <linux/input.h>
	48	#include <linux/spi/ad7877.h>
	49
	50	/*
	51	* Name the Board for the /proc/cpuinfo
	52	*/
	53	const char bfin_board_name[] = "Bluetechnix CM-BF548";
	54
	55	/*
	56	* Driver needs to know address, irq and flag pin.
	57	*/
	58
	59	#if defined(CONFIG_FB_BF54X_LQ043) \|\| defined(CONFIG_FB_BF54X_LQ043_MODULE)
	60
639f6571	61	#include <mach/bf54x-lq043.h>
db68254f MH	62
	63	static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
	64	.width = 480,
	65	.height = 272,
	66	.xres = {480, 480, 480},
	67	.yres = {272, 272, 272},
	68	.bpp = {24, 24, 24},
	69	.disp = GPIO_PE3,
	70	};
	71
	72	static struct resource bf54x_lq043_resources[] = {
	73	{
	74	.start = IRQ_EPPI0_ERR,
	75	.end = IRQ_EPPI0_ERR,
	76	.flags = IORESOURCE_IRQ,
	77	},
	78	};
	79
	80	static struct platform_device bf54x_lq043_device = {
	81	.name = "bf54x-lq043",
	82	.id = -1,
	83	.num_resources = ARRAY_SIZE(bf54x_lq043_resources),
	84	.resource = bf54x_lq043_resources,
	85	.dev = {
	86	.platform_data = &bf54x_lq043_data,
	87	},
	88	};
	89	#endif
	90
	91	#if defined(CONFIG_KEYBOARD_BFIN) \|\| defined(CONFIG_KEYBOARD_BFIN_MODULE)
	92	static unsigned int bf548_keymap[] = {
	93	KEYVAL(0, 0, KEY_ENTER),
	94	KEYVAL(0, 1, KEY_HELP),
	95	KEYVAL(0, 2, KEY_0),
	96	KEYVAL(0, 3, KEY_BACKSPACE),
	97	KEYVAL(1, 0, KEY_TAB),
	98	KEYVAL(1, 1, KEY_9),
	99	KEYVAL(1, 2, KEY_8),
	100	KEYVAL(1, 3, KEY_7),
	101	KEYVAL(2, 0, KEY_DOWN),
	102	KEYVAL(2, 1, KEY_6),
	103	KEYVAL(2, 2, KEY_5),
	104	KEYVAL(2, 3, KEY_4),
	105	KEYVAL(3, 0, KEY_UP),
	106	KEYVAL(3, 1, KEY_3),
	107	KEYVAL(3, 2, KEY_2),
	108	KEYVAL(3, 3, KEY_1),
	109	};
	110
	111	static struct bfin_kpad_platform_data bf54x_kpad_data = {
	112	.rows = 4,
	113	.cols = 4,
	114	.keymap = bf548_keymap,
	115	.keymapsize = ARRAY_SIZE(bf548_keymap),
	116	.repeat = 0,
	117	.debounce_time = 5000, /* ns (5ms) */
	118	.coldrive_time = 1000, /* ns (1ms) */
	119	.keyup_test_interval = 50, /* ms (50ms) */
	120	};
	121
	122	static struct resource bf54x_kpad_resources[] = {
	123	{
	124	.start = IRQ_KEY,
	125	.end = IRQ_KEY,
126	.flags = IORESOURCE_IRQ,
127	},
128	};
129
130	static struct platform_device bf54x_kpad_device = {
131	.name = "bf54x-keys",
132	.id = -1,
133	.num_resources = ARRAY_SIZE(bf54x_kpad_resources),
134	.resource = bf54x_kpad_resources,
135	.dev = {
136	.platform_data = &bf54x_kpad_data,
137	},
138	};
139	#endif
140
141	#if defined(CONFIG_RTC_DRV_BFIN) \|\| defined(CONFIG_RTC_DRV_BFIN_MODULE)
142	static struct platform_device rtc_device = {
143	.name = "rtc-bfin",
144	.id = -1,
145	};
146	#endif
147
148	#if defined(CONFIG_SERIAL_BFIN) \|\| defined(CONFIG_SERIAL_BFIN_MODULE)
149	static struct resource bfin_uart_resources[] = {
150	#ifdef CONFIG_SERIAL_BFIN_UART0
151	{
152	.start = 0xFFC00400,
153	.end = 0xFFC004FF,
154	.flags = IORESOURCE_MEM,
155	},
156	#endif
157	#ifdef CONFIG_SERIAL_BFIN_UART1
158	{
159	.start = 0xFFC02000,
160	.end = 0xFFC020FF,
161	.flags = IORESOURCE_MEM,
162	},
163	#endif
164	#ifdef CONFIG_SERIAL_BFIN_UART2
165	{
166	.start = 0xFFC02100,
167	.end = 0xFFC021FF,
168	.flags = IORESOURCE_MEM,
169	},
170	#endif
171	#ifdef CONFIG_SERIAL_BFIN_UART3
172	{
173	.start = 0xFFC03100,
174	.end = 0xFFC031FF,
8606801b	175	.flags = IORESOURCE_MEM,
db68254f MH	176	},
	177	#endif
	178	};
	179
	180	static struct platform_device bfin_uart_device = {
	181	.name = "bfin-uart",
	182	.id = 1,
	183	.num_resources = ARRAY_SIZE(bfin_uart_resources),
	184	.resource = bfin_uart_resources,
	185	};
	186	#endif
	187
5be36d22 GY	188	#if defined(CONFIG_BFIN_SIR) \|\| defined(CONFIG_BFIN_SIR_MODULE)
	189	static struct resource bfin_sir_resources[] = {
	190	#ifdef CONFIG_BFIN_SIR0
	191	{
	192	.start = 0xFFC00400,
	193	.end = 0xFFC004FF,
	194	.flags = IORESOURCE_MEM,
	195	},
	196	#endif
	197	#ifdef CONFIG_BFIN_SIR1
	198	{
	199	.start = 0xFFC02000,
	200	.end = 0xFFC020FF,
	201	.flags = IORESOURCE_MEM,
	202	},
	203	#endif
	204	#ifdef CONFIG_BFIN_SIR2
	205	{
	206	.start = 0xFFC02100,
	207	.end = 0xFFC021FF,
	208	.flags = IORESOURCE_MEM,
	209	},
	210	#endif
	211	#ifdef CONFIG_BFIN_SIR3
	212	{
	213	.start = 0xFFC03100,
	214	.end = 0xFFC031FF,
	215	.flags = IORESOURCE_MEM,
	216	},
	217	#endif
	218	};
	219
	220	static struct platform_device bfin_sir_device = {
	221	.name = "bfin_sir",
	222	.id = 0,
	223	.num_resources = ARRAY_SIZE(bfin_sir_resources),
	224	.resource = bfin_sir_resources,
	225	};
	226	#endif
	227
db68254f MH	228	#if defined(CONFIG_SMSC911X) \|\| defined(CONFIG_SMSC911X_MODULE)
	229	static struct resource smsc911x_resources[] = {
	230	{
	231	.name = "smsc911x-memory",
	232	.start = 0x24000000,
	233	.end = 0x24000000 + 0xFF,
	234	.flags = IORESOURCE_MEM,
	235	},
	236	{
	237	.start = IRQ_PE6,
	238	.end = IRQ_PE6,
	239	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_LOWLEVEL,
	240	},
	241	};
	242	static struct platform_device smsc911x_device = {
	243	.name = "smsc911x",
	244	.id = 0,
	245	.num_resources = ARRAY_SIZE(smsc911x_resources),
	246	.resource = smsc911x_resources,
	247	};
	248	#endif
	249
	250	#if defined(CONFIG_USB_MUSB_HDRC) \|\| defined(CONFIG_USB_MUSB_HDRC_MODULE)
	251	static struct resource musb_resources[] = {
	252	[0] = {
	253	.start = 0xFFC03C00,
	254	.end = 0xFFC040FF,
	255	.flags = IORESOURCE_MEM,
	256	},
	257	[1] = { /* general IRQ */
	258	.start = IRQ_USB_INT0,
	259	.end = IRQ_USB_INT0,
	260	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_HIGHLEVEL,
	261	},
	262	[2] = { /* DMA IRQ */
	263	.start = IRQ_USB_DMA,
	264	.end = IRQ_USB_DMA,
	265	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_HIGHLEVEL,
	266	},
	267	};
	268
50041acb BW	269	static struct musb_hdrc_config musb_config = {
	270	.multipoint = 0,
	271	.dyn_fifo = 0,
	272	.soft_con = 1,
	273	.dma = 1,
	274	.num_eps = 7,
	275	.dma_channels = 7,
	276	.gpio_vrsel = GPIO_PH6,
	277	};
	278
db68254f MH	279	static struct musb_hdrc_platform_data musb_plat = {
	280	#if defined(CONFIG_USB_MUSB_OTG)
	281	.mode = MUSB_OTG,
	282	#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
	283	.mode = MUSB_HOST,
	284	#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
	285	.mode = MUSB_PERIPHERAL,
	286	#endif
50041acb	287	.config = &musb_config,
db68254f MH	288	};
	289
	290	static u64 musb_dmamask = ~(u32)0;
	291
	292	static struct platform_device musb_device = {
	293	.name = "musb_hdrc",
	294	.id = 0,
	295	.dev = {
	296	.dma_mask = &musb_dmamask,
	297	.coherent_dma_mask = 0xffffffff,
	298	.platform_data = &musb_plat,
	299	},
	300	.num_resources = ARRAY_SIZE(musb_resources),
	301	.resource = musb_resources,
	302	};
	303	#endif
	304
	305	#if defined(CONFIG_PATA_BF54X) \|\| defined(CONFIG_PATA_BF54X_MODULE)
	306	static struct resource bfin_atapi_resources[] = {
	307	{
	308	.start = 0xFFC03800,
	309	.end = 0xFFC0386F,
	310	.flags = IORESOURCE_MEM,
	311	},
	312	{
	313	.start = IRQ_ATAPI_ERR,
	314	.end = IRQ_ATAPI_ERR,
	315	.flags = IORESOURCE_IRQ,
	316	},
	317	};
	318
	319	static struct platform_device bfin_atapi_device = {
	320	.name = "pata-bf54x",
	321	.id = -1,
	322	.num_resources = ARRAY_SIZE(bfin_atapi_resources),
	323	.resource = bfin_atapi_resources,
	324	};
	325	#endif
	326
	327	#if defined(CONFIG_MTD_NAND_BF5XX) \|\| defined(CONFIG_MTD_NAND_BF5XX_MODULE)
	328	static struct mtd_partition partition_info[] = {
	329	{
aa582977	330	.name = "linux kernel(nand)",
db68254f	331	.offset = 0,
f4585a08	332	.size = 4 * 1024 * 1024,
db68254f MH	333	},
db68254f MH	334	{
aa582977	335	.name = "file system(nand)",
f4585a08 MF	336	.offset = 4 * 1024 * 1024,
f4585a08 MF	337	.size = (256 - 4) * 1024 * 1024,
db68254f MH	338	},
	339	};
	340
	341	static struct bf5xx_nand_platform bf5xx_nand_platform = {
	342	.page_size = NFC_PG_SIZE_256,
	343	.data_width = NFC_NWIDTH_8,
	344	.partitions = partition_info,
	345	.nr_partitions = ARRAY_SIZE(partition_info),
	346	.rd_dly = 3,
	347	.wr_dly = 3,
	348	};
	349
	350	static struct resource bf5xx_nand_resources[] = {
	351	{
	352	.start = 0xFFC03B00,
	353	.end = 0xFFC03B4F,
	354	.flags = IORESOURCE_MEM,
	355	},
	356	{
	357	.start = CH_NFC,
	358	.end = CH_NFC,
	359	.flags = IORESOURCE_IRQ,
	360	},
	361	};
	362
	363	static struct platform_device bf5xx_nand_device = {
	364	.name = "bf5xx-nand",
	365	.id = 0,
	366	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
	367	.resource = bf5xx_nand_resources,
	368	.dev = {
	369	.platform_data = &bf5xx_nand_platform,
	370	},
	371	};
	372	#endif
	373
	374	#if defined(CONFIG_SDH_BFIN) \|\| defined(CONFIG_SDH_BFIN_MODULE)
	375	static struct platform_device bf54x_sdh_device = {
	376	.name = "bfin-sdh",
	377	.id = 0,
	378	};
	379	#endif
	380
	381	#if defined(CONFIG_SPI_BFIN) \|\| defined(CONFIG_SPI_BFIN_MODULE)
	382	/* all SPI peripherals info goes here */
	383	#if defined(CONFIG_MTD_M25P80) \
	384	\|\| defined(CONFIG_MTD_M25P80_MODULE)
	385	/* SPI flash chip (m25p16) */
	386	static struct mtd_partition bfin_spi_flash_partitions[] = {
	387	{
aa582977	388	.name = "bootloader(spi)",
db68254f MH	389	.size = 0x00040000,
	390	.offset = 0,
	391	.mask_flags = MTD_CAP_ROM
	392	}, {
aa582977	393	.name = "linux kernel(spi)",
db68254f MH	394	.size = 0x1c0000,
	395	.offset = 0x40000
	396	}
	397	};
	398
	399	static struct flash_platform_data bfin_spi_flash_data = {
	400	.name = "m25p80",
	401	.parts = bfin_spi_flash_partitions,
	402	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
	403	.type = "m25p16",
	404	};
	405
	406	static struct bfin5xx_spi_chip spi_flash_chip_info = {
	407	.enable_dma = 0, /* use dma transfer with this chip*/
	408	.bits_per_word = 8,
	409	.cs_change_per_word = 0,
	410	};
	411	#endif
	412
	413	#if defined(CONFIG_TOUCHSCREEN_AD7877) \|\| defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
	414	static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
	415	.cs_change_per_word = 0,
	416	.enable_dma = 0,
	417	.bits_per_word = 16,
	418	};
	419
	420	static const struct ad7877_platform_data bfin_ad7877_ts_info = {
	421	.model = 7877,
	422	.vref_delay_usecs = 50, /* internal, no capacitor */
	423	.x_plate_ohms = 419,
	424	.y_plate_ohms = 486,
	425	.pressure_max = 1000,
	426	.pressure_min = 0,
	427	.stopacq_polarity = 1,
	428	.first_conversion_delay = 3,
	429	.acquisition_time = 1,
	430	.averaging = 1,
	431	.pen_down_acc_interval = 1,
	432	};
	433	#endif
	434
	435	#if defined(CONFIG_SPI_SPIDEV) \|\| defined(CONFIG_SPI_SPIDEV_MODULE)
	436	static struct bfin5xx_spi_chip spidev_chip_info = {
	437	.enable_dma = 0,
	438	.bits_per_word = 8,
	439	};
	440	#endif
	441
	442	static struct spi_board_info bf54x_spi_board_info[] __initdata = {
	443	#if defined(CONFIG_MTD_M25P80) \
	444	\|\| defined(CONFIG_MTD_M25P80_MODULE)
	445	{
	446	/* the modalias must be the same as spi device driver name */
	447	.modalias = "m25p80", /* Name of spi_driver for this device */
	448	.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
	449	.bus_num = 0, /* Framework bus number */
	450	.chip_select = 1, /* SPI_SSEL1*/
	451	.platform_data = &bfin_spi_flash_data,
	452	.controller_data = &spi_flash_chip_info,
	453	.mode = SPI_MODE_3,
	454	},
	455	#endif
	456	#if defined(CONFIG_TOUCHSCREEN_AD7877) \|\| defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
	457	{
458	.modalias = "ad7877",
459	.platform_data = &bfin_ad7877_ts_info,
460	.irq = IRQ_PJ11,
461	.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
462	.bus_num = 0,
463	.chip_select = 2,
464	.controller_data = &spi_ad7877_chip_info,
465	},
466	#endif
467	#if defined(CONFIG_SPI_SPIDEV) \|\| defined(CONFIG_SPI_SPIDEV_MODULE)
468	{
469	.modalias = "spidev",
470	.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
471	.bus_num = 0,
472	.chip_select = 1,
473	.controller_data = &spidev_chip_info,
474	},
475	#endif
476	};
477
478	/* SPI (0) */
479	static struct resource bfin_spi0_resource[] = {
480	[0] = {
481	.start = SPI0_REGBASE,
482	.end = SPI0_REGBASE + 0xFF,
483	.flags = IORESOURCE_MEM,
484	},
485	[1] = {
486	.start = CH_SPI0,
487	.end = CH_SPI0,
488	.flags = IORESOURCE_IRQ,
489	}
490	};
491
492	/* SPI (1) */
493	static struct resource bfin_spi1_resource[] = {
494	[0] = {
495	.start = SPI1_REGBASE,
496	.end = SPI1_REGBASE + 0xFF,
497	.flags = IORESOURCE_MEM,
498	},
499	[1] = {
500	.start = CH_SPI1,
501	.end = CH_SPI1,
502	.flags = IORESOURCE_IRQ,
503	}
504	};
505
506	/* SPI controller data */
507	static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
508	.num_chipselect = 8,
509	.enable_dma = 1, /* master has the ability to do dma transfer */
510	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
511	};
512
513	static struct platform_device bf54x_spi_master0 = {
514	.name = "bfin-spi",
515	.id = 0, /* Bus number */
516	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
517	.resource = bfin_spi0_resource,
518	.dev = {
519	.platform_data = &bf54x_spi_master_info0, /* Passed to driver */
520	},
521	};
522
523	static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
524	.num_chipselect = 8,
525	.enable_dma = 1, /* master has the ability to do dma transfer */
526	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
527	};
528
529	static struct platform_device bf54x_spi_master1 = {
530	.name = "bfin-spi",
531	.id = 1, /* Bus number */
532	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
533	.resource = bfin_spi1_resource,
534	.dev = {
535	.platform_data = &bf54x_spi_master_info1, /* Passed to driver */
536	},
537	};
538	#endif /* spi master and devices */
539
540	#if defined(CONFIG_I2C_BLACKFIN_TWI) \|\| defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
541	static struct resource bfin_twi0_resource[] = {
542	[0] = {
543	.start = TWI0_REGBASE,
544	.end = TWI0_REGBASE + 0xFF,
545	.flags = IORESOURCE_MEM,
546	},
547	[1] = {
548	.start = IRQ_TWI0,
549	.end = IRQ_TWI0,
550	.flags = IORESOURCE_IRQ,
551	},
552	};
553
554	static struct platform_device i2c_bfin_twi0_device = {
555	.name = "i2c-bfin-twi",
556	.id = 0,
557	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
558	.resource = bfin_twi0_resource,
559	};
560
561	#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
562	static struct resource bfin_twi1_resource[] = {
563	[0] = {
564	.start = TWI1_REGBASE,
565	.end = TWI1_REGBASE + 0xFF,
566	.flags = IORESOURCE_MEM,
567	},
568	[1] = {
569	.start = IRQ_TWI1,
570	.end = IRQ_TWI1,
571	.flags = IORESOURCE_IRQ,
572	},
573	};
574
575	static struct platform_device i2c_bfin_twi1_device = {
576	.name = "i2c-bfin-twi",
577	.id = 1,
578	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
579	.resource = bfin_twi1_resource,
580	};
581	#endif
582	#endif
583
584	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
585	#include <linux/gpio_keys.h>
586
587	static struct gpio_keys_button bfin_gpio_keys_table[] = {
588	{BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
589	};
590
591	static struct gpio_keys_platform_data bfin_gpio_keys_data = {
592	.buttons = bfin_gpio_keys_table,
593	.nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
594	};
595
596	static struct platform_device bfin_device_gpiokeys = {
597	.name = "gpio-keys",
598	.dev = {
599	.platform_data = &bfin_gpio_keys_data,
600	},
601	};
602	#endif
603
14b03204 MH	604	static const unsigned int cclk_vlev_datasheet[] =
	605	{
	606	/*
	607	* Internal VLEV BF54XSBBC1533
	608	****temporarily using these values until data sheet is updated
	609	*/
	610	VRPAIR(VLEV_085, 150000000),
	611	VRPAIR(VLEV_090, 250000000),
	612	VRPAIR(VLEV_110, 276000000),
	613	VRPAIR(VLEV_115, 301000000),
	614	VRPAIR(VLEV_120, 525000000),
	615	VRPAIR(VLEV_125, 550000000),
	616	VRPAIR(VLEV_130, 600000000),
	617	};
	618
	619	static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
	620	.tuple_tab = cclk_vlev_datasheet,
	621	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
	622	.vr_settling_time = 25 /* us */,
	623	};
	624
	625	static struct platform_device bfin_dpmc = {
	626	.name = "bfin dpmc",
	627	.dev = {
	628	.platform_data = &bfin_dmpc_vreg_data,
	629	},
	630	};
	631
db68254f	632	static struct platform_device *cm_bf548_devices[] __initdata = {
14b03204 MH	633
	634	&bfin_dpmc,
	635
db68254f MH	636	#if defined(CONFIG_RTC_DRV_BFIN) \|\| defined(CONFIG_RTC_DRV_BFIN_MODULE)
	637	&rtc_device,
	638	#endif
	639
	640	#if defined(CONFIG_SERIAL_BFIN) \|\| defined(CONFIG_SERIAL_BFIN_MODULE)
	641	&bfin_uart_device,
	642	#endif
	643
5be36d22 GY	644	#if defined(CONFIG_BFIN_SIR) \|\| defined(CONFIG_BFIN_SIR_MODULE)
	645	&bfin_sir_device,
	646	#endif
	647
db68254f MH	648	#if defined(CONFIG_FB_BF54X_LQ043) \|\| defined(CONFIG_FB_BF54X_LQ043_MODULE)
	649	&bf54x_lq043_device,
	650	#endif
	651
	652	#if defined(CONFIG_SMSC911X) \|\| defined(CONFIG_SMSC911X_MODULE)
	653	&smsc911x_device,
	654	#endif
	655
	656	#if defined(CONFIG_USB_MUSB_HDRC) \|\| defined(CONFIG_USB_MUSB_HDRC_MODULE)
	657	&musb_device,
	658	#endif
	659
	660	#if defined(CONFIG_PATA_BF54X) \|\| defined(CONFIG_PATA_BF54X_MODULE)
	661	&bfin_atapi_device,
	662	#endif
	663
	664	#if defined(CONFIG_MTD_NAND_BF5XX) \|\| defined(CONFIG_MTD_NAND_BF5XX_MODULE)
	665	&bf5xx_nand_device,
	666	#endif
	667
	668	#if defined(CONFIG_SDH_BFIN) \|\| defined(CONFIG_SDH_BFIN_MODULE)
	669	&bf54x_sdh_device,
	670	#endif
	671
	672	#if defined(CONFIG_SPI_BFIN) \|\| defined(CONFIG_SPI_BFIN_MODULE)
	673	&bf54x_spi_master0,
	674	&bf54x_spi_master1,
	675	#endif
	676
	677	#if defined(CONFIG_KEYBOARD_BFIN) \|\| defined(CONFIG_KEYBOARD_BFIN_MODULE)
	678	&bf54x_kpad_device,
	679	#endif
	680
	681	#if defined(CONFIG_I2C_BLACKFIN_TWI) \|\| defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
	682	/* &i2c_bfin_twi0_device, */
	683	#if !defined(CONFIG_BF542)
	684	&i2c_bfin_twi1_device,
	685	#endif
	686	#endif
	687
	688	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
	689	&bfin_device_gpiokeys,
	690	#endif
	691	};
	692
	693	static int __init cm_bf548_init(void)
	694	{
f086f234	695	printk(KERN_INFO "%s(): registering device resources\n", __func__);
db68254f MH	696	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
	697
	698	#if defined(CONFIG_SPI_BFIN) \|\| defined(CONFIG_SPI_BFIN_MODULE)
	699	spi_register_board_info(bf54x_spi_board_info,
	700	ARRAY_SIZE(bf54x_spi_board_info));
	701	#endif
	702
	703	return 0;
	704	}
	705
	706	arch_initcall(cm_bf548_init);