[net-next-2.6.git] / arch / avr32 / Kconfig

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux Kernel Configuration"

config AVR32
	bool
	default y
	# With EMBEDDED=n, we get lots of stuff automatically selected
	# that we usually don't need on AVR32.
	select EMBEDDED
	help
	  AVR32 is a high-performance 32-bit RISC microprocessor core,
	  designed for cost-sensitive embedded applications, with particular
	  emphasis on low power consumption and high code density.

	  There is an AVR32 Linux project with a web page at
	  http://avr32linux.org/.

config UID16
	bool

config GENERIC_GPIO
	bool
	default y

config GENERIC_HARDIRQS
	bool
	default y

config HARDIRQS_SW_RESEND
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config GENERIC_TIME
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

config ARCH_HAS_ILOG2_U32
	bool
	default n

config ARCH_HAS_ILOG2_U64
	bool
	default n

config GENERIC_BUST_SPINLOCK
	bool

config GENERIC_HWEIGHT
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config GENERIC_BUG
	bool
	default y
	depends on BUG

source "init/Kconfig"

menu "System Type and features"

config SUBARCH_AVR32B
	bool
config MMU
	bool
config PERFORMANCE_COUNTERS
	bool

config PLATFORM_AT32AP
	bool
	select SUBARCH_AVR32B
	select MMU
	select PERFORMANCE_COUNTERS

choice
	prompt "AVR32 CPU type"
	default CPU_AT32AP7000

config CPU_AT32AP7000
	bool "AT32AP7000"
	select PLATFORM_AT32AP
endchoice

#
# CPU Daughterboards for ATSTK1000
config BOARD_ATSTK1002
	bool

choice
	prompt "AVR32 board type"
	default BOARD_ATSTK1000

config BOARD_ATSTK1000
	bool "ATSTK1000 evaluation board"
	select BOARD_ATSTK1002 if CPU_AT32AP7000

config BOARD_ATNGW100
	bool "ATNGW100 Network Gateway"
endchoice

choice
	prompt "Boot loader type"
	default LOADER_U_BOOT

config	LOADER_U_BOOT
	bool "U-Boot (or similar) bootloader"
endchoice

source "arch/avr32/mach-at32ap/Kconfig"

config LOAD_ADDRESS
	hex
	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y

config ENTRY_ADDRESS
	hex
	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y

config PHYS_OFFSET
	hex
	default 0x10000000 if CPU_AT32AP7000=y

source "kernel/Kconfig.preempt"

config HAVE_ARCH_BOOTMEM_NODE
	bool
	default n

config ARCH_HAVE_MEMORY_PRESENT
	bool
	default n

config NEED_NODE_MEMMAP_SIZE
	bool
	default n

config ARCH_FLATMEM_ENABLE
	bool
	default y

config ARCH_DISCONTIGMEM_ENABLE
	bool
	default n

config ARCH_SPARSEMEM_ENABLE
	bool
	default n

source "mm/Kconfig"

config OWNERSHIP_TRACE
	bool "Ownership trace support"
	default y
	help
	  Say Y to generate an Ownership Trace message on every context switch,
	  enabling Nexus-compliant debuggers to keep track of the PID of the
	  currently executing task.

# FPU emulation goes here

source "kernel/Kconfig.hz"

config CMDLINE
	string "Default kernel command line"
	default ""
	help
	  If you don't have a boot loader capable of passing a command line string
	  to the kernel, you may specify one here. As a minimum, you should specify
	  the memory size and the root device (e.g., mem=8M, root=/dev/nfs).

endmenu

menu "Bus options"

config PCI
	bool

source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

endmenu

menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/avr32/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"
Commit	Line	Data
5f97f7f9 HS	1	#
	2	# For a description of the syntax of this configuration file,
	3	# see Documentation/kbuild/kconfig-language.txt.
	4	#
	5
	6	mainmenu "Linux Kernel Configuration"
	7
	8	config AVR32
	9	bool
	10	default y
	11	# With EMBEDDED=n, we get lots of stuff automatically selected
	12	# that we usually don't need on AVR32.
	13	select EMBEDDED
	14	help
	15	AVR32 is a high-performance 32-bit RISC microprocessor core,
	16	designed for cost-sensitive embedded applications, with particular
	17	emphasis on low power consumption and high code density.
	18
	19	There is an AVR32 Linux project with a web page at
	20	http://avr32linux.org/.
	21
	22	config UID16
	23	bool
	24
0a938b97 DB	25	config GENERIC_GPIO
	26	bool
	27	default y
	28
5f97f7f9 HS	29	config GENERIC_HARDIRQS
	30	bool
	31	default y
	32
	33	config HARDIRQS_SW_RESEND
	34	bool
	35	default y
	36
	37	config GENERIC_IRQ_PROBE
	38	bool
	39	default y
	40
	41	config RWSEM_GENERIC_SPINLOCK
	42	bool
	43	default y
	44
	45	config GENERIC_TIME
	46	bool
	47	default y
	48
	49	config RWSEM_XCHGADD_ALGORITHM
	50	bool
	51
f0d1b0b3 DH	52	config ARCH_HAS_ILOG2_U32
	53	bool
	54	default n
	55
	56	config ARCH_HAS_ILOG2_U64
	57	bool
	58	default n
	59
5f97f7f9 HS	60	config GENERIC_BUST_SPINLOCK
	61	bool
	62
	63	config GENERIC_HWEIGHT
	64	bool
	65	default y
	66
	67	config GENERIC_CALIBRATE_DELAY
	68	bool
	69	default y
	70
623b0355 HS	71	config GENERIC_BUG
	72	bool
	73	default y
	74	depends on BUG
	75
5f97f7f9 HS	76	source "init/Kconfig"
	77
	78	menu "System Type and features"
	79
	80	config SUBARCH_AVR32B
	81	bool
	82	config MMU
	83	bool
	84	config PERFORMANCE_COUNTERS
	85	bool
	86
	87	config PLATFORM_AT32AP
	88	bool
	89	select SUBARCH_AVR32B
	90	select MMU
	91	select PERFORMANCE_COUNTERS
	92
	93	choice
	94	prompt "AVR32 CPU type"
	95	default CPU_AT32AP7000
	96
	97	config CPU_AT32AP7000
	98	bool "AT32AP7000"
	99	select PLATFORM_AT32AP
	100	endchoice
	101
	102	#
	103	# CPU Daughterboards for ATSTK1000
	104	config BOARD_ATSTK1002
	105	bool
	106
	107	choice
	108	prompt "AVR32 board type"
	109	default BOARD_ATSTK1000
	110
	111	config BOARD_ATSTK1000
	112	bool "ATSTK1000 evaluation board"
	113	select BOARD_ATSTK1002 if CPU_AT32AP7000
9ca20a83 HS	114
	115	config BOARD_ATNGW100
	116	bool "ATNGW100 Network Gateway"
5f97f7f9 HS	117	endchoice
	118
	119	choice
	120	prompt "Boot loader type"
	121	default LOADER_U_BOOT
	122
	123	config LOADER_U_BOOT
	124	bool "U-Boot (or similar) bootloader"
	125	endchoice
	126
228e845f HS	127	source "arch/avr32/mach-at32ap/Kconfig"
228e845f HS	128
5f97f7f9 HS	129	config LOAD_ADDRESS
	130	hex
	131	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
	132
	133	config ENTRY_ADDRESS
	134	hex
	135	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
	136
	137	config PHYS_OFFSET
	138	hex
	139	default 0x10000000 if CPU_AT32AP7000=y
	140
	141	source "kernel/Kconfig.preempt"
	142
	143	config HAVE_ARCH_BOOTMEM_NODE
	144	bool
	145	default n
	146
	147	config ARCH_HAVE_MEMORY_PRESENT
	148	bool
	149	default n
	150
	151	config NEED_NODE_MEMMAP_SIZE
	152	bool
	153	default n
	154
	155	config ARCH_FLATMEM_ENABLE
	156	bool
	157	default y
	158
	159	config ARCH_DISCONTIGMEM_ENABLE
	160	bool
	161	default n
	162
	163	config ARCH_SPARSEMEM_ENABLE
	164	bool
	165	default n
	166
	167	source "mm/Kconfig"
	168
	169	config OWNERSHIP_TRACE
	170	bool "Ownership trace support"
	171	default y
	172	help
	173	Say Y to generate an Ownership Trace message on every context switch,
	174	enabling Nexus-compliant debuggers to keep track of the PID of the
	175	currently executing task.
	176
	177	# FPU emulation goes here
	178
	179	source "kernel/Kconfig.hz"
	180
	181	config CMDLINE
	182	string "Default kernel command line"
	183	default ""
	184	help
	185	If you don't have a boot loader capable of passing a command line string
	186	to the kernel, you may specify one here. As a minimum, you should specify
	187	the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
	188
	189	endmenu
	190
	191	menu "Bus options"
	192
193	config PCI
194	bool
195
196	source "drivers/pci/Kconfig"
197
198	source "drivers/pcmcia/Kconfig"
199
200	endmenu
201
202	menu "Executable file formats"
203	source "fs/Kconfig.binfmt"
204	endmenu
205
206	source "net/Kconfig"
207
208	source "drivers/Kconfig"
209
210	source "fs/Kconfig"
211
212	source "arch/avr32/Kconfig.debug"
213
214	source "security/Kconfig"
215
216	source "crypto/Kconfig"
217
218	source "lib/Kconfig"