]>
Commit | Line | Data |
---|---|---|
a08ab637 | 1 | # Copyright 2008 Openmoko, Inc. |
431107ea | 2 | # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> |
a08ab637 BD |
3 | # |
4 | # Licensed under GPLv2 | |
5 | ||
110d85ac BD |
6 | # temporary until we can eliminate all drivers using it. |
7 | config PLAT_S3C64XX | |
8 | bool | |
9 | depends on ARCH_S3C64XX | |
10 | default y | |
11 | help | |
12 | Base platform code for any Samsung S3C64XX device | |
13 | ||
14 | ||
a08ab637 | 15 | # Configuration options for the S3C6410 CPU |
d626aeed | 16 | |
431107ea BD |
17 | config CPU_S3C6400 |
18 | bool | |
431107ea BD |
19 | help |
20 | Enable S3C6400 CPU support | |
21 | ||
d626aeed BD |
22 | config CPU_S3C6410 |
23 | bool | |
24 | help | |
25 | Enable S3C6410 CPU support | |
26 | ||
f7be9aba BD |
27 | config S3C64XX_DMA |
28 | bool "S3C64XX DMA" | |
29 | select S3C_DMA | |
30 | ||
2f6c2ac1 | 31 | config S3C64XX_SETUP_SDHCI |
4faf6867 | 32 | select S3C64XX_SETUP_SDHCI_GPIO |
2f6c2ac1 | 33 | bool |
5cc7fd88 | 34 | help |
2f6c2ac1 BD |
35 | Internal configuration for default SDHCI setup for S3C6400 and |
36 | S3C6410 SoCs. | |
5cc7fd88 | 37 | |
88fc68a2 BD |
38 | # platform specific device setup |
39 | ||
40 | config S3C64XX_SETUP_I2C0 | |
41 | bool | |
42 | default y | |
43 | help | |
44 | Common setup code for i2c bus 0. | |
45 | ||
46 | Note, currently since i2c0 is always compiled, this setup helper | |
47 | is always compiled with it. | |
48 | ||
49 | config S3C64XX_SETUP_I2C1 | |
50 | bool | |
51 | help | |
52 | Common setup code for i2c bus 1. | |
53 | ||
54 | config S3C64XX_SETUP_FB_24BPP | |
55 | bool | |
56 | help | |
57 | Common setup code for S3C64XX with an 24bpp RGB display helper. | |
58 | ||
59 | config S3C64XX_SETUP_SDHCI_GPIO | |
60 | bool | |
61 | help | |
62 | Common setup code for S3C64XX SDHCI GPIO configurations | |
63 | ||
431107ea BD |
64 | # S36400 Macchine support |
65 | ||
66 | config MACH_SMDK6400 | |
67 | bool "SMDK6400" | |
68 | select CPU_S3C6400 | |
69 | select S3C_DEV_HSMMC | |
70 | select S3C_DEV_NAND | |
2f6c2ac1 | 71 | select S3C64XX_SETUP_SDHCI |
431107ea BD |
72 | help |
73 | Machine support for the Samsung SMDK6400 | |
74 | ||
75 | # S3C6410 machine support | |
76 | ||
1f26a8a0 KL |
77 | config MACH_ANW6410 |
78 | bool "A&W6410" | |
79 | select CPU_S3C6410 | |
80 | select S3C_DEV_FB | |
81 | select S3C64XX_SETUP_FB_24BPP | |
82 | help | |
83 | Machine support for the A&W6410 | |
84 | ||
5718df9d BD |
85 | config MACH_SMDK6410 |
86 | bool "SMDK6410" | |
87 | select CPU_S3C6410 | |
4f7cdc38 | 88 | select SAMSUNG_DEV_ADC |
5b323c7b | 89 | select S3C_DEV_HSMMC |
b24636cf | 90 | select S3C_DEV_HSMMC1 |
d7ea3743 | 91 | select S3C_DEV_I2C1 |
438a5d42 | 92 | select S3C_DEV_FB |
85b14a3f | 93 | select SAMSUNG_DEV_TS |
98fd63ba | 94 | select S3C_DEV_USB_HOST |
06fa1d37 | 95 | select S3C_DEV_USB_HSOTG |
2f6c2ac1 | 96 | select S3C64XX_SETUP_SDHCI |
d7ea3743 | 97 | select S3C64XX_SETUP_I2C1 |
438a5d42 | 98 | select S3C64XX_SETUP_FB_24BPP |
5718df9d BD |
99 | help |
100 | Machine support for the Samsung SMDK6410 | |
b24636cf BD |
101 | |
102 | # At least some of the SMDK6410s were shipped with the card detect | |
103 | # for the MMC/SD slots connected to the same input. This means that | |
104 | # either the boards need to be altered to have channel0 to an alternate | |
105 | # configuration or that only one slot can be used. | |
106 | ||
107 | choice | |
108 | prompt "SMDK6410 MMC/SD slot setup" | |
109 | depends on MACH_SMDK6410 | |
110 | ||
111 | config SMDK6410_SD_CH0 | |
112 | bool "Use channel 0 only" | |
113 | depends on MACH_SMDK6410 | |
114 | help | |
115 | Select CON7 (channel 0) as the MMC/SD slot, as | |
116 | at least some SMDK6410 boards come with the | |
117 | resistors fitted so that the card detects for | |
118 | channels 0 and 1 are the same. | |
431107ea | 119 | |
b24636cf BD |
120 | config SMDK6410_SD_CH1 |
121 | bool "Use channel 1 only" | |
122 | depends on MACH_SMDK6410 | |
123 | help | |
124 | Select CON6 (channel 1) as the MMC/SD slot, as | |
125 | at least some SMDK6410 boards come with the | |
126 | resistors fitted so that the card detects for | |
127 | channels 0 and 1 are the same. | |
128 | ||
129 | endchoice | |
ecc558ac MB |
130 | |
131 | config SMDK6410_WM1190_EV1 | |
132 | bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" | |
133 | depends on MACH_SMDK6410 | |
134 | select REGULATOR | |
135 | select REGULATOR_WM8350 | |
c7a19787 | 136 | select S3C24XX_GPIO_EXTRA64 |
ecc558ac MB |
137 | select MFD_WM8350_I2C |
138 | select MFD_WM8350_CONFIG_MODE_0 | |
139 | select MFD_WM8350_CONFIG_MODE_3 | |
140 | select MFD_WM8352_CONFIG_MODE_0 | |
141 | help | |
142 | The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC | |
143 | and audio daughtercard for the Samsung SMDK6410 reference | |
144 | platform. Enabling this option will build support for this | |
145 | module into the kernel. The presence of the module will be | |
146 | detected at runtime so the the resulting kernel can be used | |
147 | with or without the 1190-EV1 fitted. | |
87c4122f | 148 | |
60f9101a MB |
149 | config SMDK6410_WM1192_EV1 |
150 | bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" | |
151 | depends on MACH_SMDK6410 | |
152 | select REGULATOR | |
153 | select REGULATOR_WM831X | |
154 | select S3C24XX_GPIO_EXTRA64 | |
155 | select MFD_WM831X | |
156 | help | |
157 | The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC | |
158 | daughtercard for the Samsung SMDK6410 reference platform. | |
159 | Enabling this option will build support for this module into | |
160 | the kernel. The presence of the daughtercard will be | |
161 | detected at runtime so the the resulting kernel can be used | |
162 | with or without the 1192-EV1 fitted. | |
163 | ||
87c4122f KP |
164 | config MACH_NCP |
165 | bool "NCP" | |
166 | select CPU_S3C6410 | |
167 | select S3C_DEV_I2C1 | |
168 | select S3C_DEV_HSMMC1 | |
169 | select S3C64XX_SETUP_I2C1 | |
170 | help | |
171 | Machine support for the Samsung NCP | |
2896bda4 PK |
172 | |
173 | config MACH_HMT | |
174 | bool "Airgoo HMT" | |
175 | select CPU_S3C6410 | |
176 | select S3C_DEV_FB | |
d23b3517 | 177 | select S3C_DEV_NAND |
2896bda4 PK |
178 | select S3C_DEV_USB_HOST |
179 | select S3C64XX_SETUP_FB_24BPP | |
180 | select HAVE_PWM | |
181 | help | |
182 | Machine support for the Airgoo HMT |