git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| a08ab637 | 1 | # Copyright 2008 Openmoko, Inc. |
| 431107ea | 2 | # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> |
| a08ab637 BD |
3 | # |
| 4 | # Licensed under GPLv2 | |
| 5 | ||
| 110d85ac BD |
6 | # temporary until we can eliminate all drivers using it. |
| 7 | config PLAT_S3C64XX | |
| 8 | bool | |
| 9 | depends on ARCH_S3C64XX | |
| fda22577 | 10 | select SAMSUNG_WAKEMASK |
| 110d85ac BD |
11 | default y |
| 12 | help | |
| 13 | Base platform code for any Samsung S3C64XX device | |
| 14 | ||
| 15 | ||
| a08ab637 | 16 | # Configuration options for the S3C6410 CPU |
| d626aeed | 17 | |
| 431107ea BD |
18 | config CPU_S3C6400 |
| 19 | bool | |
| 431107ea BD |
20 | help |
| 21 | Enable S3C6400 CPU support | |
| 22 | ||
| d626aeed BD |
23 | config CPU_S3C6410 |
| 24 | bool | |
| 25 | help | |
| 26 | Enable S3C6410 CPU support | |
| 27 | ||
| f7be9aba BD |
28 | config S3C64XX_DMA |
| 29 | bool "S3C64XX DMA" | |
| 30 | select S3C_DMA | |
| 31 | ||
| 2f6c2ac1 | 32 | config S3C64XX_SETUP_SDHCI |
| 4faf6867 | 33 | select S3C64XX_SETUP_SDHCI_GPIO |
| 2f6c2ac1 | 34 | bool |
| 5cc7fd88 | 35 | help |
| 2f6c2ac1 BD |
36 | Internal configuration for default SDHCI setup for S3C6400 and |
| 37 | S3C6410 SoCs. | |
| 5cc7fd88 | 38 | |
| 999304be MS |
39 | config S3C64XX_DEV_ONENAND1 |
| 40 | bool | |
| 41 | help | |
| 42 | Compile in platform device definition for OneNAND1 controller | |
| 43 | ||
| 88fc68a2 BD |
44 | # platform specific device setup |
| 45 | ||
| 46 | config S3C64XX_SETUP_I2C0 | |
| 47 | bool | |
| 48 | default y | |
| 49 | help | |
| 50 | Common setup code for i2c bus 0. | |
| 51 | ||
| 52 | Note, currently since i2c0 is always compiled, this setup helper | |
| 53 | is always compiled with it. | |
| 54 | ||
| 55 | config S3C64XX_SETUP_I2C1 | |
| 56 | bool | |
| 57 | help | |
| 58 | Common setup code for i2c bus 1. | |
| 59 | ||
| 0ab0b6d2 AK |
60 | config S3C64XX_SETUP_IDE |
| 61 | bool | |
| 62 | help | |
| 63 | Common setup code for S3C64XX IDE. | |
| 64 | ||
| 88fc68a2 BD |
65 | config S3C64XX_SETUP_FB_24BPP |
| 66 | bool | |
| 67 | help | |
| 68 | Common setup code for S3C64XX with an 24bpp RGB display helper. | |
| 69 | ||
| 290d0983 NKC |
70 | config S3C64XX_SETUP_KEYPAD |
| 71 | bool | |
| 72 | help | |
| 73 | Common setup code for S3C64XX KEYPAD GPIO configurations | |
| 74 | ||
| 88fc68a2 BD |
75 | config S3C64XX_SETUP_SDHCI_GPIO |
| 76 | bool | |
| 77 | help | |
| 78 | Common setup code for S3C64XX SDHCI GPIO configurations | |
| 79 | ||
| 431107ea BD |
80 | # S36400 Macchine support |
| 81 | ||
| 82 | config MACH_SMDK6400 | |
| 83 | bool "SMDK6400" | |
| 84 | select CPU_S3C6400 | |
| 85 | select S3C_DEV_HSMMC | |
| 86 | select S3C_DEV_NAND | |
| 2f6c2ac1 | 87 | select S3C64XX_SETUP_SDHCI |
| 431107ea BD |
88 | help |
| 89 | Machine support for the Samsung SMDK6400 | |
| 90 | ||
| 91 | # S3C6410 machine support | |
| 92 | ||
| 1f26a8a0 KL |
93 | config MACH_ANW6410 |
| 94 | bool "A&W6410" | |
| 95 | select CPU_S3C6410 | |
| 96 | select S3C_DEV_FB | |
| 97 | select S3C64XX_SETUP_FB_24BPP | |
| 98 | help | |
| 99 | Machine support for the A&W6410 | |
| 100 | ||
| eab5cfa0 DA |
101 | config MACH_REAL6410 |
| 102 | bool "REAL6410" | |
| 103 | select CPU_S3C6410 | |
| ce611d7b DA |
104 | select S3C_DEV_HSMMC |
| 105 | select S3C_DEV_HSMMC1 | |
| 106 | select S3C64XX_SETUP_SDHCI | |
| eab5cfa0 DA |
107 | help |
| 108 | Machine support for the CoreWind REAL6410 | |
| 109 | ||
| 5718df9d BD |
110 | config MACH_SMDK6410 |
| 111 | bool "SMDK6410" | |
| 112 | select CPU_S3C6410 | |
| 4f7cdc38 | 113 | select SAMSUNG_DEV_ADC |
| 5b323c7b | 114 | select S3C_DEV_HSMMC |
| b24636cf | 115 | select S3C_DEV_HSMMC1 |
| d7ea3743 | 116 | select S3C_DEV_I2C1 |
| 0ab0b6d2 | 117 | select SAMSUNG_DEV_IDE |
| 438a5d42 | 118 | select S3C_DEV_FB |
| 9bbf4a63 | 119 | select S3C_DEV_RTC |
| 85b14a3f | 120 | select SAMSUNG_DEV_TS |
| 98fd63ba | 121 | select S3C_DEV_USB_HOST |
| 06fa1d37 | 122 | select S3C_DEV_USB_HSOTG |
| b351c4a1 | 123 | select S3C_DEV_WDT |
| 290d0983 | 124 | select SAMSUNG_DEV_KEYPAD |
| b351c4a1 | 125 | select HAVE_S3C2410_WATCHDOG |
| 2f6c2ac1 | 126 | select S3C64XX_SETUP_SDHCI |
| d7ea3743 | 127 | select S3C64XX_SETUP_I2C1 |
| 0ab0b6d2 | 128 | select S3C64XX_SETUP_IDE |
| 438a5d42 | 129 | select S3C64XX_SETUP_FB_24BPP |
| 290d0983 | 130 | select S3C64XX_SETUP_KEYPAD |
| 5718df9d BD |
131 | help |
| 132 | Machine support for the Samsung SMDK6410 | |
| b24636cf BD |
133 | |
| 134 | # At least some of the SMDK6410s were shipped with the card detect | |
| 135 | # for the MMC/SD slots connected to the same input. This means that | |
| 136 | # either the boards need to be altered to have channel0 to an alternate | |
| 137 | # configuration or that only one slot can be used. | |
| 138 | ||
| 139 | choice | |
| 140 | prompt "SMDK6410 MMC/SD slot setup" | |
| 141 | depends on MACH_SMDK6410 | |
| 142 | ||
| 143 | config SMDK6410_SD_CH0 | |
| 144 | bool "Use channel 0 only" | |
| 145 | depends on MACH_SMDK6410 | |
| 146 | help | |
| 147 | Select CON7 (channel 0) as the MMC/SD slot, as | |
| 148 | at least some SMDK6410 boards come with the | |
| 149 | resistors fitted so that the card detects for | |
| 150 | channels 0 and 1 are the same. | |
| 431107ea | 151 | |
| b24636cf BD |
152 | config SMDK6410_SD_CH1 |
| 153 | bool "Use channel 1 only" | |
| 154 | depends on MACH_SMDK6410 | |
| 155 | help | |
| 156 | Select CON6 (channel 1) as the MMC/SD slot, as | |
| 157 | at least some SMDK6410 boards come with the | |
| 158 | resistors fitted so that the card detects for | |
| 159 | channels 0 and 1 are the same. | |
| 160 | ||
| 161 | endchoice | |
| ecc558ac MB |
162 | |
| 163 | config SMDK6410_WM1190_EV1 | |
| 164 | bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" | |
| 165 | depends on MACH_SMDK6410 | |
| 166 | select REGULATOR | |
| 167 | select REGULATOR_WM8350 | |
| c7a19787 | 168 | select S3C24XX_GPIO_EXTRA64 |
| ecc558ac MB |
169 | select MFD_WM8350_I2C |
| 170 | select MFD_WM8350_CONFIG_MODE_0 | |
| 171 | select MFD_WM8350_CONFIG_MODE_3 | |
| 172 | select MFD_WM8352_CONFIG_MODE_0 | |
| 173 | help | |
| 174 | The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC | |
| 175 | and audio daughtercard for the Samsung SMDK6410 reference | |
| 176 | platform. Enabling this option will build support for this | |
| 177 | module into the kernel. The presence of the module will be | |
| 178 | detected at runtime so the the resulting kernel can be used | |
| 179 | with or without the 1190-EV1 fitted. | |
| 87c4122f | 180 | |
| 60f9101a MB |
181 | config SMDK6410_WM1192_EV1 |
| 182 | bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" | |
| 183 | depends on MACH_SMDK6410 | |
| 184 | select REGULATOR | |
| 185 | select REGULATOR_WM831X | |
| 186 | select S3C24XX_GPIO_EXTRA64 | |
| 187 | select MFD_WM831X | |
| e5b48684 | 188 | select MFD_WM831X_I2C |
| 60f9101a MB |
189 | help |
| 190 | The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC | |
| 191 | daughtercard for the Samsung SMDK6410 reference platform. | |
| 192 | Enabling this option will build support for this module into | |
| 193 | the kernel. The presence of the daughtercard will be | |
| 194 | detected at runtime so the the resulting kernel can be used | |
| 195 | with or without the 1192-EV1 fitted. | |
| 196 | ||
| 87c4122f KP |
197 | config MACH_NCP |
| 198 | bool "NCP" | |
| 199 | select CPU_S3C6410 | |
| 200 | select S3C_DEV_I2C1 | |
| 201 | select S3C_DEV_HSMMC1 | |
| 202 | select S3C64XX_SETUP_I2C1 | |
| 203 | help | |
| 204 | Machine support for the Samsung NCP | |
| 2896bda4 PK |
205 | |
| 206 | config MACH_HMT | |
| 207 | bool "Airgoo HMT" | |
| 208 | select CPU_S3C6410 | |
| 209 | select S3C_DEV_FB | |
| d23b3517 | 210 | select S3C_DEV_NAND |
| 2896bda4 PK |
211 | select S3C_DEV_USB_HOST |
| 212 | select S3C64XX_SETUP_FB_24BPP | |
| 213 | select HAVE_PWM | |
| 214 | help | |
| 215 | Machine support for the Airgoo HMT | |
| a2f7bffa MC |
216 | |
| 217 | config MACH_SMARTQ | |
| 218 | bool | |
| 219 | select CPU_S3C6410 | |
| 220 | select S3C_DEV_HSMMC | |
| 221 | select S3C_DEV_HSMMC1 | |
| 222 | select S3C_DEV_HSMMC2 | |
| 223 | select S3C_DEV_FB | |
| 224 | select S3C_DEV_HWMON | |
| 225 | select S3C_DEV_RTC | |
| 226 | select S3C_DEV_USB_HSOTG | |
| 227 | select S3C_DEV_USB_HOST | |
| 228 | select S3C64XX_SETUP_SDHCI | |
| 229 | select S3C64XX_SETUP_FB_24BPP | |
| 230 | select SAMSUNG_DEV_ADC | |
| 231 | select SAMSUNG_DEV_TS | |
| 232 | select HAVE_PWM | |
| 233 | help | |
| 234 | Shared machine support for SmartQ 5/7 | |
| 235 | ||
| 236 | config MACH_SMARTQ5 | |
| 237 | bool "SmartQ 5" | |
| 238 | select MACH_SMARTQ | |
| 239 | help | |
| 240 | Machine support for the SmartQ 5 | |
| 241 | ||
| 242 | config MACH_SMARTQ7 | |
| 243 | bool "SmartQ 7" | |
| 244 | select MACH_SMARTQ | |
| 245 | help | |
| 246 | Machine support for the SmartQ 7 |