git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| a08ab637 | 1 | # Copyright 2008 Openmoko, Inc. |
| 431107ea | 2 | # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> |
| a08ab637 BD |
3 | # |
| 4 | # Licensed under GPLv2 | |
| 5 | ||
| 110d85ac BD |
6 | # temporary until we can eliminate all drivers using it. |
| 7 | config PLAT_S3C64XX | |
| 8 | bool | |
| 9 | depends on ARCH_S3C64XX | |
| 10 | default y | |
| 11 | help | |
| 12 | Base platform code for any Samsung S3C64XX device | |
| 13 | ||
| 14 | ||
| a08ab637 | 15 | # Configuration options for the S3C6410 CPU |
| d626aeed | 16 | |
| 431107ea BD |
17 | config CPU_S3C6400 |
| 18 | bool | |
| 431107ea BD |
19 | help |
| 20 | Enable S3C6400 CPU support | |
| 21 | ||
| d626aeed BD |
22 | config CPU_S3C6410 |
| 23 | bool | |
| 24 | help | |
| 25 | Enable S3C6410 CPU support | |
| 26 | ||
| f7be9aba BD |
27 | config S3C64XX_DMA |
| 28 | bool "S3C64XX DMA" | |
| 29 | select S3C_DMA | |
| 30 | ||
| 2f6c2ac1 | 31 | config S3C64XX_SETUP_SDHCI |
| 4faf6867 | 32 | select S3C64XX_SETUP_SDHCI_GPIO |
| 2f6c2ac1 | 33 | bool |
| 5cc7fd88 | 34 | help |
| 2f6c2ac1 BD |
35 | Internal configuration for default SDHCI setup for S3C6400 and |
| 36 | S3C6410 SoCs. | |
| 5cc7fd88 | 37 | |
| 88fc68a2 BD |
38 | # platform specific device setup |
| 39 | ||
| 40 | config S3C64XX_SETUP_I2C0 | |
| 41 | bool | |
| 42 | default y | |
| 43 | help | |
| 44 | Common setup code for i2c bus 0. | |
| 45 | ||
| 46 | Note, currently since i2c0 is always compiled, this setup helper | |
| 47 | is always compiled with it. | |
| 48 | ||
| 49 | config S3C64XX_SETUP_I2C1 | |
| 50 | bool | |
| 51 | help | |
| 52 | Common setup code for i2c bus 1. | |
| 53 | ||
| 54 | config S3C64XX_SETUP_FB_24BPP | |
| 55 | bool | |
| 56 | help | |
| 57 | Common setup code for S3C64XX with an 24bpp RGB display helper. | |
| 58 | ||
| 59 | config S3C64XX_SETUP_SDHCI_GPIO | |
| 60 | bool | |
| 61 | help | |
| 62 | Common setup code for S3C64XX SDHCI GPIO configurations | |
| 63 | ||
| 431107ea BD |
64 | # S36400 Macchine support |
| 65 | ||
| 66 | config MACH_SMDK6400 | |
| 67 | bool "SMDK6400" | |
| 68 | select CPU_S3C6400 | |
| 69 | select S3C_DEV_HSMMC | |
| 70 | select S3C_DEV_NAND | |
| 2f6c2ac1 | 71 | select S3C64XX_SETUP_SDHCI |
| 431107ea BD |
72 | help |
| 73 | Machine support for the Samsung SMDK6400 | |
| 74 | ||
| 75 | # S3C6410 machine support | |
| 76 | ||
| 1f26a8a0 KL |
77 | config MACH_ANW6410 |
| 78 | bool "A&W6410" | |
| 79 | select CPU_S3C6410 | |
| 80 | select S3C_DEV_FB | |
| 81 | select S3C64XX_SETUP_FB_24BPP | |
| 82 | help | |
| 83 | Machine support for the A&W6410 | |
| 84 | ||
| 5718df9d BD |
85 | config MACH_SMDK6410 |
| 86 | bool "SMDK6410" | |
| 87 | select CPU_S3C6410 | |
| 4f7cdc38 | 88 | select SAMSUNG_DEV_ADC |
| 5b323c7b | 89 | select S3C_DEV_HSMMC |
| b24636cf | 90 | select S3C_DEV_HSMMC1 |
| d7ea3743 | 91 | select S3C_DEV_I2C1 |
| 438a5d42 | 92 | select S3C_DEV_FB |
| 85b14a3f | 93 | select SAMSUNG_DEV_TS |
| 98fd63ba | 94 | select S3C_DEV_USB_HOST |
| 06fa1d37 | 95 | select S3C_DEV_USB_HSOTG |
| 2f6c2ac1 | 96 | select S3C64XX_SETUP_SDHCI |
| d7ea3743 | 97 | select S3C64XX_SETUP_I2C1 |
| 438a5d42 | 98 | select S3C64XX_SETUP_FB_24BPP |
| 5718df9d BD |
99 | help |
| 100 | Machine support for the Samsung SMDK6410 | |
| b24636cf BD |
101 | |
| 102 | # At least some of the SMDK6410s were shipped with the card detect | |
| 103 | # for the MMC/SD slots connected to the same input. This means that | |
| 104 | # either the boards need to be altered to have channel0 to an alternate | |
| 105 | # configuration or that only one slot can be used. | |
| 106 | ||
| 107 | choice | |
| 108 | prompt "SMDK6410 MMC/SD slot setup" | |
| 109 | depends on MACH_SMDK6410 | |
| 110 | ||
| 111 | config SMDK6410_SD_CH0 | |
| 112 | bool "Use channel 0 only" | |
| 113 | depends on MACH_SMDK6410 | |
| 114 | help | |
| 115 | Select CON7 (channel 0) as the MMC/SD slot, as | |
| 116 | at least some SMDK6410 boards come with the | |
| 117 | resistors fitted so that the card detects for | |
| 118 | channels 0 and 1 are the same. | |
| 431107ea | 119 | |
| b24636cf BD |
120 | config SMDK6410_SD_CH1 |
| 121 | bool "Use channel 1 only" | |
| 122 | depends on MACH_SMDK6410 | |
| 123 | help | |
| 124 | Select CON6 (channel 1) as the MMC/SD slot, as | |
| 125 | at least some SMDK6410 boards come with the | |
| 126 | resistors fitted so that the card detects for | |
| 127 | channels 0 and 1 are the same. | |
| 128 | ||
| 129 | endchoice | |
| ecc558ac MB |
130 | |
| 131 | config SMDK6410_WM1190_EV1 | |
| 132 | bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" | |
| 133 | depends on MACH_SMDK6410 | |
| 134 | select REGULATOR | |
| 135 | select REGULATOR_WM8350 | |
| c7a19787 | 136 | select S3C24XX_GPIO_EXTRA64 |
| ecc558ac MB |
137 | select MFD_WM8350_I2C |
| 138 | select MFD_WM8350_CONFIG_MODE_0 | |
| 139 | select MFD_WM8350_CONFIG_MODE_3 | |
| 140 | select MFD_WM8352_CONFIG_MODE_0 | |
| 141 | help | |
| 142 | The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC | |
| 143 | and audio daughtercard for the Samsung SMDK6410 reference | |
| 144 | platform. Enabling this option will build support for this | |
| 145 | module into the kernel. The presence of the module will be | |
| 146 | detected at runtime so the the resulting kernel can be used | |
| 147 | with or without the 1190-EV1 fitted. | |
| 87c4122f | 148 | |
| 60f9101a MB |
149 | config SMDK6410_WM1192_EV1 |
| 150 | bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" | |
| 151 | depends on MACH_SMDK6410 | |
| 152 | select REGULATOR | |
| 153 | select REGULATOR_WM831X | |
| 154 | select S3C24XX_GPIO_EXTRA64 | |
| 155 | select MFD_WM831X | |
| 156 | help | |
| 157 | The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC | |
| 158 | daughtercard for the Samsung SMDK6410 reference platform. | |
| 159 | Enabling this option will build support for this module into | |
| 160 | the kernel. The presence of the daughtercard will be | |
| 161 | detected at runtime so the the resulting kernel can be used | |
| 162 | with or without the 1192-EV1 fitted. | |
| 163 | ||
| 87c4122f KP |
164 | config MACH_NCP |
| 165 | bool "NCP" | |
| 166 | select CPU_S3C6410 | |
| 167 | select S3C_DEV_I2C1 | |
| 168 | select S3C_DEV_HSMMC1 | |
| 169 | select S3C64XX_SETUP_I2C1 | |
| 170 | help | |
| 171 | Machine support for the Samsung NCP | |
| 2896bda4 PK |
172 | |
| 173 | config MACH_HMT | |
| 174 | bool "Airgoo HMT" | |
| 175 | select CPU_S3C6410 | |
| 176 | select S3C_DEV_FB | |
| d23b3517 | 177 | select S3C_DEV_NAND |
| 2896bda4 PK |
178 | select S3C_DEV_USB_HOST |
| 179 | select S3C64XX_SETUP_FB_24BPP | |
| 180 | select HAVE_PWM | |
| 181 | help | |
| 182 | Machine support for the Airgoo HMT | |
| a2f7bffa MC |
183 | |
| 184 | config MACH_SMARTQ | |
| 185 | bool | |
| 186 | select CPU_S3C6410 | |
| 187 | select S3C_DEV_HSMMC | |
| 188 | select S3C_DEV_HSMMC1 | |
| 189 | select S3C_DEV_HSMMC2 | |
| 190 | select S3C_DEV_FB | |
| 191 | select S3C_DEV_HWMON | |
| 192 | select S3C_DEV_RTC | |
| 193 | select S3C_DEV_USB_HSOTG | |
| 194 | select S3C_DEV_USB_HOST | |
| 195 | select S3C64XX_SETUP_SDHCI | |
| 196 | select S3C64XX_SETUP_FB_24BPP | |
| 197 | select SAMSUNG_DEV_ADC | |
| 198 | select SAMSUNG_DEV_TS | |
| 199 | select HAVE_PWM | |
| 200 | help | |
| 201 | Shared machine support for SmartQ 5/7 | |
| 202 | ||
| 203 | config MACH_SMARTQ5 | |
| 204 | bool "SmartQ 5" | |
| 205 | select MACH_SMARTQ | |
| 206 | help | |
| 207 | Machine support for the SmartQ 5 | |
| 208 | ||
| 209 | config MACH_SMARTQ7 | |
| 210 | bool "SmartQ 7" | |
| 211 | select MACH_SMARTQ | |
| 212 | help | |
| 213 | Machine support for the SmartQ 7 |