git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| a08ab637 | 1 | # Copyright 2008 Openmoko, Inc. |
| 431107ea | 2 | # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> |
| a08ab637 BD |
3 | # |
| 4 | # Licensed under GPLv2 | |
| 5 | ||
| 6 | # Configuration options for the S3C6410 CPU | |
| d626aeed | 7 | |
| 431107ea BD |
8 | config CPU_S3C6400 |
| 9 | bool | |
| 10 | select CPU_S3C6400_INIT | |
| 11 | select CPU_S3C6400_CLOCK | |
| 12 | help | |
| 13 | Enable S3C6400 CPU support | |
| 14 | ||
| d626aeed BD |
15 | config CPU_S3C6410 |
| 16 | bool | |
| aa64ea3f | 17 | select CPU_S3C6400_INIT |
| cf18acf0 | 18 | select CPU_S3C6400_CLOCK |
| d626aeed BD |
19 | help |
| 20 | Enable S3C6410 CPU support | |
| 21 | ||
| 2f6c2ac1 | 22 | config S3C64XX_SETUP_SDHCI |
| 4faf6867 | 23 | select S3C64XX_SETUP_SDHCI_GPIO |
| 2f6c2ac1 | 24 | bool |
| 5cc7fd88 | 25 | help |
| 2f6c2ac1 BD |
26 | Internal configuration for default SDHCI setup for S3C6400 and |
| 27 | S3C6410 SoCs. | |
| 5cc7fd88 | 28 | |
| 88fc68a2 BD |
29 | # platform specific device setup |
| 30 | ||
| 31 | config S3C64XX_SETUP_I2C0 | |
| 32 | bool | |
| 33 | default y | |
| 34 | help | |
| 35 | Common setup code for i2c bus 0. | |
| 36 | ||
| 37 | Note, currently since i2c0 is always compiled, this setup helper | |
| 38 | is always compiled with it. | |
| 39 | ||
| 40 | config S3C64XX_SETUP_I2C1 | |
| 41 | bool | |
| 42 | help | |
| 43 | Common setup code for i2c bus 1. | |
| 44 | ||
| 45 | config S3C64XX_SETUP_FB_24BPP | |
| 46 | bool | |
| 47 | help | |
| 48 | Common setup code for S3C64XX with an 24bpp RGB display helper. | |
| 49 | ||
| 50 | config S3C64XX_SETUP_SDHCI_GPIO | |
| 51 | bool | |
| 52 | help | |
| 53 | Common setup code for S3C64XX SDHCI GPIO configurations | |
| 54 | ||
| 431107ea BD |
55 | # S36400 Macchine support |
| 56 | ||
| 57 | config MACH_SMDK6400 | |
| 58 | bool "SMDK6400" | |
| 59 | select CPU_S3C6400 | |
| 60 | select S3C_DEV_HSMMC | |
| 61 | select S3C_DEV_NAND | |
| 2f6c2ac1 | 62 | select S3C64XX_SETUP_SDHCI |
| 431107ea BD |
63 | help |
| 64 | Machine support for the Samsung SMDK6400 | |
| 65 | ||
| 66 | # S3C6410 machine support | |
| 67 | ||
| 1f26a8a0 KL |
68 | config MACH_ANW6410 |
| 69 | bool "A&W6410" | |
| 70 | select CPU_S3C6410 | |
| 71 | select S3C_DEV_FB | |
| 72 | select S3C64XX_SETUP_FB_24BPP | |
| 73 | help | |
| 74 | Machine support for the A&W6410 | |
| 75 | ||
| 5718df9d BD |
76 | config MACH_SMDK6410 |
| 77 | bool "SMDK6410" | |
| 78 | select CPU_S3C6410 | |
| 5b323c7b | 79 | select S3C_DEV_HSMMC |
| b24636cf | 80 | select S3C_DEV_HSMMC1 |
| d7ea3743 | 81 | select S3C_DEV_I2C1 |
| 438a5d42 | 82 | select S3C_DEV_FB |
| 98fd63ba | 83 | select S3C_DEV_USB_HOST |
| 06fa1d37 | 84 | select S3C_DEV_USB_HSOTG |
| 2f6c2ac1 | 85 | select S3C64XX_SETUP_SDHCI |
| d7ea3743 | 86 | select S3C64XX_SETUP_I2C1 |
| 438a5d42 | 87 | select S3C64XX_SETUP_FB_24BPP |
| 5718df9d BD |
88 | help |
| 89 | Machine support for the Samsung SMDK6410 | |
| b24636cf BD |
90 | |
| 91 | # At least some of the SMDK6410s were shipped with the card detect | |
| 92 | # for the MMC/SD slots connected to the same input. This means that | |
| 93 | # either the boards need to be altered to have channel0 to an alternate | |
| 94 | # configuration or that only one slot can be used. | |
| 95 | ||
| 96 | choice | |
| 97 | prompt "SMDK6410 MMC/SD slot setup" | |
| 98 | depends on MACH_SMDK6410 | |
| 99 | ||
| 100 | config SMDK6410_SD_CH0 | |
| 101 | bool "Use channel 0 only" | |
| 102 | depends on MACH_SMDK6410 | |
| 103 | help | |
| 104 | Select CON7 (channel 0) as the MMC/SD slot, as | |
| 105 | at least some SMDK6410 boards come with the | |
| 106 | resistors fitted so that the card detects for | |
| 107 | channels 0 and 1 are the same. | |
| 431107ea | 108 | |
| b24636cf BD |
109 | config SMDK6410_SD_CH1 |
| 110 | bool "Use channel 1 only" | |
| 111 | depends on MACH_SMDK6410 | |
| 112 | help | |
| 113 | Select CON6 (channel 1) as the MMC/SD slot, as | |
| 114 | at least some SMDK6410 boards come with the | |
| 115 | resistors fitted so that the card detects for | |
| 116 | channels 0 and 1 are the same. | |
| 117 | ||
| 118 | endchoice | |
| ecc558ac MB |
119 | |
| 120 | config SMDK6410_WM1190_EV1 | |
| 121 | bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" | |
| 122 | depends on MACH_SMDK6410 | |
| 123 | select REGULATOR | |
| 124 | select REGULATOR_WM8350 | |
| c7a19787 | 125 | select S3C24XX_GPIO_EXTRA64 |
| ecc558ac MB |
126 | select MFD_WM8350_I2C |
| 127 | select MFD_WM8350_CONFIG_MODE_0 | |
| 128 | select MFD_WM8350_CONFIG_MODE_3 | |
| 129 | select MFD_WM8352_CONFIG_MODE_0 | |
| 130 | help | |
| 131 | The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC | |
| 132 | and audio daughtercard for the Samsung SMDK6410 reference | |
| 133 | platform. Enabling this option will build support for this | |
| 134 | module into the kernel. The presence of the module will be | |
| 135 | detected at runtime so the the resulting kernel can be used | |
| 136 | with or without the 1190-EV1 fitted. | |
| 87c4122f KP |
137 | |
| 138 | config MACH_NCP | |
| 139 | bool "NCP" | |
| 140 | select CPU_S3C6410 | |
| 141 | select S3C_DEV_I2C1 | |
| 142 | select S3C_DEV_HSMMC1 | |
| 143 | select S3C64XX_SETUP_I2C1 | |
| 144 | help | |
| 145 | Machine support for the Samsung NCP | |
| 2896bda4 PK |
146 | |
| 147 | config MACH_HMT | |
| 148 | bool "Airgoo HMT" | |
| 149 | select CPU_S3C6410 | |
| 150 | select S3C_DEV_FB | |
| d23b3517 | 151 | select S3C_DEV_NAND |
| 2896bda4 PK |
152 | select S3C_DEV_USB_HOST |
| 153 | select S3C64XX_SETUP_FB_24BPP | |
| 154 | select HAVE_PWM | |
| 155 | help | |
| 156 | Machine support for the Airgoo HMT |