git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| 1da177e4 LT |
1 | |
| 2 | Fax with isdn4linux | |
| 3 | =================== | |
| 4 | ||
| 5 | When enabled during kernel configuration, the tty emulator | |
| 6 | of the ISDN subsystem is capable of the Fax Class 2 commands. | |
| 7 | ||
| 8 | This only makes sense under the following conditions : | |
| 9 | ||
| 10 | - You need the commands as dummy, because you are using | |
| 11 | hylafax (with patch) for AVM capi. | |
| 12 | - You want to use the fax capabilities of your isdn-card. | |
| 13 | (supported cards are listed below) | |
| 14 | ||
| 15 | ||
| 16 | NOTE: This implementation does *not* support fax with passive | |
| 17 | ISDN-cards (known as softfax). The low-level driver of | |
| 18 | the ISDN-card and/or the card itself must support this. | |
| 19 | ||
| 20 | ||
| 21 | Supported ISDN-Cards | |
| 22 | -------------------- | |
| 23 | ||
| 24 | Eicon DIVA Server BRI/PCI | |
| 25 | - full support with both B-channels. | |
| 26 | ||
| 27 | Eicon DIVA Server 4BRI/PCI | |
| 28 | - full support with all B-channels. | |
| 29 | ||
| 30 | Eicon DIVA Server PRI/PCI | |
| 31 | - full support on amount of B-channels | |
| 32 | depending on DSPs on board. | |
| 33 | ||
| 34 | ||
| 35 | ||
| 36 | The command set is known as Class 2 (not Class 2.0) and | |
| 37 | can be activated by AT+FCLASS=2 | |
| 38 | ||
| 39 | ||
| 40 | The interface between the link-level-module and the hardware-level driver | |
| 41 | is described in the files INTERFACE.fax and INTERFACE. | |
| 42 | ||
| 43 | Armin | |
| 44 | mac@melware.de | |
| 45 |