]>
Commit | Line | Data |
---|---|---|
022cbd73 | 1 | /* |
d0760b3b | 2 | * linux/arch/arm/mach-at91/board-sam9261ek.c |
022cbd73 AV |
3 | * |
4 | * Copyright (C) 2005 SAN People | |
5 | * Copyright (C) 2006 Atmel | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
20 | */ | |
21 | ||
22 | #include <linux/types.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/mm.h> | |
25 | #include <linux/module.h> | |
26 | #include <linux/platform_device.h> | |
27 | #include <linux/spi/spi.h> | |
23522728 | 28 | #include <linux/spi/ads7846.h> |
5e9df924 AV |
29 | #include <linux/spi/at73c213.h> |
30 | #include <linux/clk.h> | |
022cbd73 | 31 | #include <linux/dm9000.h> |
cdf95c73 | 32 | #include <linux/fb.h> |
d0f9b55e AV |
33 | #include <linux/gpio_keys.h> |
34 | #include <linux/input.h> | |
cdf95c73 AV |
35 | |
36 | #include <video/atmel_lcdc.h> | |
022cbd73 | 37 | |
022cbd73 AV |
38 | #include <asm/setup.h> |
39 | #include <asm/mach-types.h> | |
40 | #include <asm/irq.h> | |
41 | ||
42 | #include <asm/mach/arch.h> | |
43 | #include <asm/mach/map.h> | |
44 | #include <asm/mach/irq.h> | |
45 | ||
e505240b | 46 | #include <mach/hardware.h> |
a09e64fb RK |
47 | #include <mach/board.h> |
48 | #include <mach/gpio.h> | |
49 | #include <mach/at91sam9_smc.h> | |
8cdae51a | 50 | #include <mach/at91_shdwc.h> |
022cbd73 | 51 | |
8cdae51a | 52 | #include "sam9_smc.h" |
022cbd73 AV |
53 | #include "generic.h" |
54 | ||
55 | ||
022cbd73 AV |
56 | static void __init ek_map_io(void) |
57 | { | |
58 | /* Initialize processor: 18.432 MHz crystal */ | |
59 | at91sam9261_initialize(18432000); | |
60 | ||
302c0ef7 AV |
61 | /* Setup the LEDs */ |
62 | at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); | |
63 | ||
4f37940d | 64 | /* DBGU on ttyS0. (Rx & Tx only) */ |
a3da1222 AV |
65 | at91_register_uart(0, 0, 0); |
66 | ||
67 | /* set serial console to ttyS0 (ie, DBGU) */ | |
68 | at91_set_serial_console(0); | |
022cbd73 AV |
69 | } |
70 | ||
71 | static void __init ek_init_irq(void) | |
72 | { | |
73 | at91sam9261_init_interrupts(NULL); | |
74 | } | |
75 | ||
76 | ||
77 | /* | |
78 | * DM9000 ethernet device | |
79 | */ | |
80 | #if defined(CONFIG_DM9000) | |
8cdae51a | 81 | static struct resource dm9000_resource[] = { |
022cbd73 AV |
82 | [0] = { |
83 | .start = AT91_CHIPSELECT_2, | |
84 | .end = AT91_CHIPSELECT_2 + 3, | |
85 | .flags = IORESOURCE_MEM | |
86 | }, | |
87 | [1] = { | |
88 | .start = AT91_CHIPSELECT_2 + 0x44, | |
89 | .end = AT91_CHIPSELECT_2 + 0xFF, | |
90 | .flags = IORESOURCE_MEM | |
91 | }, | |
92 | [2] = { | |
93 | .start = AT91_PIN_PC11, | |
94 | .end = AT91_PIN_PC11, | |
95 | .flags = IORESOURCE_IRQ | |
1879c45c | 96 | | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, |
022cbd73 AV |
97 | } |
98 | }; | |
99 | ||
100 | static struct dm9000_plat_data dm9000_platdata = { | |
1879c45c | 101 | .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, |
022cbd73 AV |
102 | }; |
103 | ||
8cdae51a | 104 | static struct platform_device dm9000_device = { |
022cbd73 AV |
105 | .name = "dm9000", |
106 | .id = 0, | |
8cdae51a AV |
107 | .num_resources = ARRAY_SIZE(dm9000_resource), |
108 | .resource = dm9000_resource, | |
022cbd73 AV |
109 | .dev = { |
110 | .platform_data = &dm9000_platdata, | |
111 | } | |
112 | }; | |
113 | ||
8cdae51a AV |
114 | /* |
115 | * SMC timings for the DM9000. | |
116 | * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings. | |
117 | */ | |
118 | static struct sam9_smc_config __initdata dm9000_smc_config = { | |
119 | .ncs_read_setup = 0, | |
120 | .nrd_setup = 2, | |
121 | .ncs_write_setup = 0, | |
122 | .nwe_setup = 2, | |
123 | ||
124 | .ncs_read_pulse = 8, | |
125 | .nrd_pulse = 4, | |
126 | .ncs_write_pulse = 8, | |
127 | .nwe_pulse = 4, | |
128 | ||
129 | .read_cycle = 16, | |
130 | .write_cycle = 16, | |
131 | ||
132 | .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, | |
133 | .tdf_cycles = 1, | |
134 | }; | |
135 | ||
022cbd73 AV |
136 | static void __init ek_add_device_dm9000(void) |
137 | { | |
8cdae51a AV |
138 | /* Configure chip-select 2 (DM9000) */ |
139 | sam9_smc_configure(2, &dm9000_smc_config); | |
022cbd73 AV |
140 | |
141 | /* Configure Reset signal as output */ | |
142 | at91_set_gpio_output(AT91_PIN_PC10, 0); | |
143 | ||
144 | /* Configure Interrupt pin as input, no pull-up */ | |
145 | at91_set_gpio_input(AT91_PIN_PC11, 0); | |
146 | ||
8cdae51a | 147 | platform_device_register(&dm9000_device); |
022cbd73 AV |
148 | } |
149 | #else | |
150 | static void __init ek_add_device_dm9000(void) {} | |
151 | #endif /* CONFIG_DM9000 */ | |
152 | ||
153 | ||
154 | /* | |
155 | * USB Host Port | |
156 | */ | |
157 | static struct at91_usbh_data __initdata ek_usbh_data = { | |
158 | .ports = 2, | |
159 | }; | |
160 | ||
161 | ||
162 | /* | |
163 | * USB Device Port | |
164 | */ | |
165 | static struct at91_udc_data __initdata ek_udc_data = { | |
166 | .vbus_pin = AT91_PIN_PB29, | |
167 | .pullup_pin = 0, /* pull-up driven by UDC */ | |
168 | }; | |
169 | ||
170 | ||
171 | /* | |
172 | * MCI (SD/MMC) | |
173 | */ | |
174 | static struct at91_mmc_data __initdata ek_mmc_data = { | |
175 | .wire4 = 1, | |
176 | // .det_pin = ... not connected | |
177 | // .wp_pin = ... not connected | |
178 | // .vcc_pin = ... not connected | |
179 | }; | |
180 | ||
181 | ||
182 | /* | |
183 | * NAND flash | |
184 | */ | |
185 | static struct mtd_partition __initdata ek_nand_partition[] = { | |
186 | { | |
187 | .name = "Partition 1", | |
188 | .offset = 0, | |
e505240b | 189 | .size = SZ_256K, |
022cbd73 AV |
190 | }, |
191 | { | |
192 | .name = "Partition 2", | |
e505240b | 193 | .offset = MTDPART_OFS_NXTBLK, |
022cbd73 AV |
194 | .size = MTDPART_SIZ_FULL, |
195 | }, | |
196 | }; | |
197 | ||
cdea4606 | 198 | static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) |
022cbd73 AV |
199 | { |
200 | *num_partitions = ARRAY_SIZE(ek_nand_partition); | |
201 | return ek_nand_partition; | |
202 | } | |
203 | ||
3c3796cc | 204 | static struct atmel_nand_data __initdata ek_nand_data = { |
022cbd73 AV |
205 | .ale = 22, |
206 | .cle = 21, | |
207 | // .det_pin = ... not connected | |
208 | .rdy_pin = AT91_PIN_PC15, | |
209 | .enable_pin = AT91_PIN_PC14, | |
210 | .partition_info = nand_partitions, | |
f6ed6f78 | 211 | #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) |
022cbd73 AV |
212 | .bus_width_16 = 1, |
213 | #else | |
214 | .bus_width_16 = 0, | |
215 | #endif | |
216 | }; | |
217 | ||
8cdae51a AV |
218 | static struct sam9_smc_config __initdata ek_nand_smc_config = { |
219 | .ncs_read_setup = 0, | |
220 | .nrd_setup = 1, | |
221 | .ncs_write_setup = 0, | |
222 | .nwe_setup = 1, | |
223 | ||
224 | .ncs_read_pulse = 3, | |
225 | .nrd_pulse = 3, | |
226 | .ncs_write_pulse = 3, | |
227 | .nwe_pulse = 3, | |
228 | ||
229 | .read_cycle = 5, | |
230 | .write_cycle = 5, | |
231 | ||
232 | .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, | |
233 | .tdf_cycles = 2, | |
234 | }; | |
235 | ||
236 | static void __init ek_add_device_nand(void) | |
237 | { | |
238 | /* setup bus-width (8 or 16) */ | |
239 | if (ek_nand_data.bus_width_16) | |
240 | ek_nand_smc_config.mode |= AT91_SMC_DBW_16; | |
241 | else | |
242 | ek_nand_smc_config.mode |= AT91_SMC_DBW_8; | |
243 | ||
244 | /* configure chip-select 3 (NAND) */ | |
245 | sam9_smc_configure(3, &ek_nand_smc_config); | |
246 | ||
247 | at91_add_device_nand(&ek_nand_data); | |
248 | } | |
249 | ||
250 | ||
23522728 AV |
251 | /* |
252 | * ADS7846 Touchscreen | |
253 | */ | |
254 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | |
255 | ||
256 | static int ads7843_pendown_state(void) | |
257 | { | |
258 | return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */ | |
259 | } | |
260 | ||
261 | static struct ads7846_platform_data ads_info = { | |
262 | .model = 7843, | |
263 | .x_min = 150, | |
264 | .x_max = 3830, | |
265 | .y_min = 190, | |
266 | .y_max = 3830, | |
267 | .vref_delay_usecs = 100, | |
268 | .x_plate_ohms = 450, | |
269 | .y_plate_ohms = 250, | |
270 | .pressure_max = 15000, | |
271 | .debounce_max = 1, | |
272 | .debounce_rep = 0, | |
273 | .debounce_tol = (~0), | |
274 | .get_pendown_state = ads7843_pendown_state, | |
275 | }; | |
276 | ||
277 | static void __init ek_add_device_ts(void) | |
278 | { | |
279 | at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */ | |
280 | at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */ | |
281 | } | |
282 | #else | |
283 | static void __init ek_add_device_ts(void) {} | |
284 | #endif | |
285 | ||
5e9df924 AV |
286 | /* |
287 | * Audio | |
288 | */ | |
289 | static struct at73c213_board_info at73c213_data = { | |
290 | .ssc_id = 1, | |
b319ff80 | 291 | #if defined(CONFIG_MACH_AT91SAM9261EK) |
5e9df924 | 292 | .shortname = "AT91SAM9261-EK external DAC", |
b319ff80 NF |
293 | #else |
294 | .shortname = "AT91SAM9G10-EK external DAC", | |
295 | #endif | |
5e9df924 AV |
296 | }; |
297 | ||
298 | #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) | |
299 | static void __init at73c213_set_clk(struct at73c213_board_info *info) | |
300 | { | |
301 | struct clk *pck2; | |
302 | struct clk *plla; | |
303 | ||
304 | pck2 = clk_get(NULL, "pck2"); | |
305 | plla = clk_get(NULL, "plla"); | |
306 | ||
307 | /* AT73C213 MCK Clock */ | |
308 | at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */ | |
309 | ||
310 | clk_set_parent(pck2, plla); | |
311 | clk_put(plla); | |
312 | ||
313 | info->dac_clk = pck2; | |
314 | } | |
315 | #else | |
316 | static void __init at73c213_set_clk(struct at73c213_board_info *info) {} | |
317 | #endif | |
318 | ||
022cbd73 AV |
319 | /* |
320 | * SPI devices | |
321 | */ | |
322 | static struct spi_board_info ek_spi_devices[] = { | |
323 | { /* DataFlash chip */ | |
324 | .modalias = "mtd_dataflash", | |
325 | .chip_select = 0, | |
326 | .max_speed_hz = 15 * 1000 * 1000, | |
327 | .bus_num = 0, | |
328 | }, | |
23522728 AV |
329 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) |
330 | { | |
331 | .modalias = "ads7846", | |
332 | .chip_select = 2, | |
333 | .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ | |
334 | .bus_num = 0, | |
335 | .platform_data = &ads_info, | |
336 | .irq = AT91SAM9261_ID_IRQ0, | |
5e9df924 | 337 | .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ |
23522728 AV |
338 | }, |
339 | #endif | |
022cbd73 AV |
340 | #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) |
341 | { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */ | |
342 | .modalias = "mtd_dataflash", | |
343 | .chip_select = 3, | |
344 | .max_speed_hz = 15 * 1000 * 1000, | |
345 | .bus_num = 0, | |
346 | }, | |
23522728 | 347 | #elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) |
022cbd73 | 348 | { /* AT73C213 DAC */ |
23522728 | 349 | .modalias = "at73c213", |
022cbd73 AV |
350 | .chip_select = 3, |
351 | .max_speed_hz = 10 * 1000 * 1000, | |
352 | .bus_num = 0, | |
5e9df924 AV |
353 | .mode = SPI_MODE_1, |
354 | .platform_data = &at73c213_data, | |
355 | .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */ | |
022cbd73 AV |
356 | }, |
357 | #endif | |
358 | }; | |
359 | ||
360 | ||
cdf95c73 AV |
361 | /* |
362 | * LCD Controller | |
363 | */ | |
364 | #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) | |
51708748 AV |
365 | |
366 | #if defined(CONFIG_FB_ATMEL_STN) | |
367 | ||
368 | /* STN */ | |
369 | static struct fb_videomode at91_stn_modes[] = { | |
370 | { | |
371 | .name = "SP06Q002 @ 75", | |
372 | .refresh = 75, | |
373 | .xres = 320, .yres = 240, | |
374 | .pixclock = KHZ2PICOS(1440), | |
375 | ||
376 | .left_margin = 1, .right_margin = 1, | |
377 | .upper_margin = 0, .lower_margin = 0, | |
378 | .hsync_len = 1, .vsync_len = 1, | |
379 | ||
380 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
381 | .vmode = FB_VMODE_NONINTERLACED, | |
382 | }, | |
383 | }; | |
384 | ||
385 | static struct fb_monspecs at91fb_default_stn_monspecs = { | |
386 | .manufacturer = "HIT", | |
387 | .monitor = "SP06Q002", | |
388 | ||
389 | .modedb = at91_stn_modes, | |
390 | .modedb_len = ARRAY_SIZE(at91_stn_modes), | |
391 | .hfmin = 15000, | |
392 | .hfmax = 64000, | |
393 | .vfmin = 50, | |
394 | .vfmax = 150, | |
395 | }; | |
396 | ||
397 | #define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | |
398 | | ATMEL_LCDC_DISTYPE_STNMONO \ | |
399 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ | |
400 | | ATMEL_LCDC_IFWIDTH_4 \ | |
401 | | ATMEL_LCDC_SCANMOD_SINGLE) | |
402 | ||
403 | static void at91_lcdc_stn_power_control(int on) | |
404 | { | |
405 | /* backlight */ | |
406 | if (on) { /* power up */ | |
407 | at91_set_gpio_value(AT91_PIN_PC14, 0); | |
408 | at91_set_gpio_value(AT91_PIN_PC15, 0); | |
409 | } else { /* power down */ | |
410 | at91_set_gpio_value(AT91_PIN_PC14, 1); | |
411 | at91_set_gpio_value(AT91_PIN_PC15, 1); | |
412 | } | |
413 | } | |
414 | ||
415 | static struct atmel_lcdfb_info __initdata ek_lcdc_data = { | |
416 | .default_bpp = 1, | |
417 | .default_dmacon = ATMEL_LCDC_DMAEN, | |
418 | .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, | |
419 | .default_monspecs = &at91fb_default_stn_monspecs, | |
420 | .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, | |
421 | .guard_time = 1, | |
b319ff80 NF |
422 | #if defined(CONFIG_MACH_AT91SAM9G10EK) |
423 | .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, | |
424 | #endif | |
51708748 AV |
425 | }; |
426 | ||
427 | #else | |
428 | ||
429 | /* TFT */ | |
cdf95c73 AV |
430 | static struct fb_videomode at91_tft_vga_modes[] = { |
431 | { | |
432 | .name = "TX09D50VM1CCA @ 60", | |
433 | .refresh = 60, | |
434 | .xres = 240, .yres = 320, | |
435 | .pixclock = KHZ2PICOS(4965), | |
436 | ||
437 | .left_margin = 1, .right_margin = 33, | |
438 | .upper_margin = 1, .lower_margin = 0, | |
439 | .hsync_len = 5, .vsync_len = 1, | |
440 | ||
441 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
442 | .vmode = FB_VMODE_NONINTERLACED, | |
443 | }, | |
444 | }; | |
445 | ||
51708748 | 446 | static struct fb_monspecs at91fb_default_tft_monspecs = { |
cdf95c73 AV |
447 | .manufacturer = "HIT", |
448 | .monitor = "TX09D50VM1CCA", | |
449 | ||
450 | .modedb = at91_tft_vga_modes, | |
451 | .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), | |
452 | .hfmin = 15000, | |
453 | .hfmax = 64000, | |
454 | .vfmin = 50, | |
455 | .vfmax = 150, | |
456 | }; | |
457 | ||
51708748 | 458 | #define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ |
cdf95c73 AV |
459 | | ATMEL_LCDC_DISTYPE_TFT \ |
460 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) | |
461 | ||
51708748 | 462 | static void at91_lcdc_tft_power_control(int on) |
cdf95c73 AV |
463 | { |
464 | if (on) | |
465 | at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ | |
466 | else | |
467 | at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ | |
468 | } | |
469 | ||
cdf95c73 | 470 | static struct atmel_lcdfb_info __initdata ek_lcdc_data = { |
a9a84c37 | 471 | .lcdcon_is_backlight = true, |
cdf95c73 AV |
472 | .default_bpp = 16, |
473 | .default_dmacon = ATMEL_LCDC_DMAEN, | |
51708748 AV |
474 | .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, |
475 | .default_monspecs = &at91fb_default_tft_monspecs, | |
476 | .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, | |
cdf95c73 | 477 | .guard_time = 1, |
b319ff80 NF |
478 | #if defined(CONFIG_MACH_AT91SAM9G10EK) |
479 | .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, | |
480 | #endif | |
cdf95c73 | 481 | }; |
51708748 | 482 | #endif |
cdf95c73 AV |
483 | |
484 | #else | |
485 | static struct atmel_lcdfb_info __initdata ek_lcdc_data; | |
486 | #endif | |
487 | ||
488 | ||
d0f9b55e AV |
489 | /* |
490 | * GPIO Buttons | |
491 | */ | |
492 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
493 | static struct gpio_keys_button ek_buttons[] = { | |
494 | { | |
495 | .gpio = AT91_PIN_PA27, | |
eaf858a9 | 496 | .code = BTN_0, |
d0f9b55e AV |
497 | .desc = "Button 0", |
498 | .active_low = 1, | |
77789ad8 | 499 | .wakeup = 1, |
d0f9b55e AV |
500 | }, |
501 | { | |
502 | .gpio = AT91_PIN_PA26, | |
eaf858a9 | 503 | .code = BTN_1, |
d0f9b55e AV |
504 | .desc = "Button 1", |
505 | .active_low = 1, | |
77789ad8 | 506 | .wakeup = 1, |
d0f9b55e AV |
507 | }, |
508 | { | |
509 | .gpio = AT91_PIN_PA25, | |
eaf858a9 | 510 | .code = BTN_2, |
d0f9b55e AV |
511 | .desc = "Button 2", |
512 | .active_low = 1, | |
77789ad8 | 513 | .wakeup = 1, |
d0f9b55e AV |
514 | }, |
515 | { | |
516 | .gpio = AT91_PIN_PA24, | |
eaf858a9 | 517 | .code = BTN_3, |
d0f9b55e AV |
518 | .desc = "Button 3", |
519 | .active_low = 1, | |
77789ad8 | 520 | .wakeup = 1, |
d0f9b55e AV |
521 | } |
522 | }; | |
523 | ||
524 | static struct gpio_keys_platform_data ek_button_data = { | |
525 | .buttons = ek_buttons, | |
526 | .nbuttons = ARRAY_SIZE(ek_buttons), | |
527 | }; | |
528 | ||
529 | static struct platform_device ek_button_device = { | |
530 | .name = "gpio-keys", | |
531 | .id = -1, | |
532 | .num_resources = 0, | |
533 | .dev = { | |
534 | .platform_data = &ek_button_data, | |
535 | } | |
536 | }; | |
537 | ||
538 | static void __init ek_add_device_buttons(void) | |
539 | { | |
77789ad8 | 540 | at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */ |
302edfd0 | 541 | at91_set_deglitch(AT91_PIN_PA27, 1); |
77789ad8 | 542 | at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */ |
302edfd0 | 543 | at91_set_deglitch(AT91_PIN_PA26, 1); |
77789ad8 | 544 | at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */ |
302edfd0 | 545 | at91_set_deglitch(AT91_PIN_PA25, 1); |
77789ad8 | 546 | at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */ |
302edfd0 | 547 | at91_set_deglitch(AT91_PIN_PA24, 1); |
d0f9b55e AV |
548 | |
549 | platform_device_register(&ek_button_device); | |
550 | } | |
551 | #else | |
552 | static void __init ek_add_device_buttons(void) {} | |
553 | #endif | |
554 | ||
5b7659d1 AV |
555 | /* |
556 | * LEDs | |
557 | */ | |
558 | static struct gpio_led ek_leds[] = { | |
559 | { /* "bottom" led, green, userled1 to be defined */ | |
560 | .name = "ds7", | |
561 | .gpio = AT91_PIN_PA14, | |
562 | .active_low = 1, | |
563 | .default_trigger = "none", | |
564 | }, | |
565 | { /* "top" led, green, userled2 to be defined */ | |
566 | .name = "ds8", | |
567 | .gpio = AT91_PIN_PA13, | |
568 | .active_low = 1, | |
569 | .default_trigger = "none", | |
570 | }, | |
571 | { /* "power" led, yellow */ | |
572 | .name = "ds1", | |
573 | .gpio = AT91_PIN_PA23, | |
574 | .default_trigger = "heartbeat", | |
575 | } | |
576 | }; | |
577 | ||
022cbd73 AV |
578 | static void __init ek_board_init(void) |
579 | { | |
580 | /* Serial */ | |
581 | at91_add_device_serial(); | |
582 | /* USB Host */ | |
583 | at91_add_device_usbh(&ek_usbh_data); | |
584 | /* USB Device */ | |
585 | at91_add_device_udc(&ek_udc_data); | |
586 | /* I2C */ | |
f230d3f5 | 587 | at91_add_device_i2c(NULL, 0); |
022cbd73 | 588 | /* NAND */ |
8cdae51a | 589 | ek_add_device_nand(); |
022cbd73 AV |
590 | /* DM9000 ethernet */ |
591 | ek_add_device_dm9000(); | |
592 | ||
593 | /* spi0 and mmc/sd share the same PIO pins */ | |
594 | #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) | |
595 | /* SPI */ | |
596 | at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); | |
23522728 AV |
597 | /* Touchscreen */ |
598 | ek_add_device_ts(); | |
5e9df924 AV |
599 | /* SSC (to AT73C213) */ |
600 | at73c213_set_clk(&at73c213_data); | |
601 | at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); | |
022cbd73 AV |
602 | #else |
603 | /* MMC */ | |
d0760b3b | 604 | at91_add_device_mmc(0, &ek_mmc_data); |
022cbd73 | 605 | #endif |
cdf95c73 AV |
606 | /* LCD Controller */ |
607 | at91_add_device_lcdc(&ek_lcdc_data); | |
d0f9b55e AV |
608 | /* Push Buttons */ |
609 | ek_add_device_buttons(); | |
5b7659d1 AV |
610 | /* LEDs */ |
611 | at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); | |
022cbd73 AV |
612 | } |
613 | ||
b319ff80 | 614 | #if defined(CONFIG_MACH_AT91SAM9261EK) |
022cbd73 | 615 | MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") |
b319ff80 NF |
616 | #else |
617 | MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") | |
618 | #endif | |
022cbd73 AV |
619 | /* Maintainer: Atmel */ |
620 | .phys_io = AT91_BASE_SYS, | |
621 | .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, | |
622 | .boot_params = AT91_SDRAM_BASE + 0x100, | |
623 | .timer = &at91sam926x_timer, | |
624 | .map_io = ek_map_io, | |
625 | .init_irq = ek_init_irq, | |
626 | .init_machine = ek_board_init, | |
627 | MACHINE_END |